Академический Документы
Профессиональный Документы
Культура Документы
Product Description
The Dual Tower Mounted Amplifier (DTMA) is a low-noise amplifier installed he signal-to-noise ratio and enhance the near the antenna. It helps to improve th receiving sensibility of the BTS system. It enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces mproves voice and data communication the transmitting power of cellphones, im quality.
Features
z High linearity and low noise performanc ce. z Balanced LNA design and power failure e bypass for high reliability. z Light weight and compact design. z Wall mounting and mast mounting. z Built-in lightning protection up to 10 kA. z Support AISG1.1 and AISG2.0 protocol.
Intermodulation products in Rx band (dBm) Frequency range (MHz) Bandwidth (MHz) Return loss (dB) Insertion loss in by-pass mode (dB) Gain (dB) ( ) Noise figure** (dB) (+22 to +28 ) Output 1dB compression (dBm) OIP3 (dBm) Group delay variation
Rx Specifications
1710 - 1785 75 18 (DC ON) / 13 (DC OFF) Typ. < 2.8 (DC OFF) 12 1 Avg. < 1.5 12 > 25 < 45 ns @ 5 MHz
Electrical Sp pecifications
CWA Mode DC supply voltage (V) Operating current per TMA (without RET) (mA) Alarm management (mA) Power consumption (W) 9 - 15 100 - 290 310 - 670 <5 AISG Mode 9 - 30 50 - 450 AISG
Environmenta al Specification
Operating temperature range () IP rating MTBF (hours) EMC Lightning protection (kA) -40 to +65 IP67 > 1,000,000 ETS 300 342-3 10 (8/20 us)
Mechanical Specification S
RF connectors AISG connector Mounting Weight (kg) Mast diameter (mm) Dimensions (H x W x D) (mm) *I *Insertion ti l loss: IL = 4 x 7/16 female 8-pin 8 i fem f male, l IEC 60130-9 60130 9 (pin1 ( i 1 & pin6: i 6 9V - 30V DC, DC pin3: i 3 RS485B, pin5: RS485A, pin7: DC return, other pins: not connected) Wall mounting / Mast mounting 5.8 30 - 125 287 x 187 x 83 (without connectors, without mounting brackets)
Mechanical
www.huawei.com
Issue: 2011-03-30