Академический Документы
Профессиональный Документы
Культура Документы
DC Power Controls
3TC44
3TC52
Select Contactor from table below. To complete catalog number replace the two daggers () with appropriate coil voltage suffix. See corresponding coil voltage suffix table. Technical Data see page 2/203. Dimensions see page 2/203.
24 B4 48 W4 60 E4 110 F4 125 G4 230 P4 Replace in the contactor catalog number with a coil code from the table above.
C1 K1 P1 Q0 S0
DC Operated
Auxiliary Contacts Type Ampere Rating Frame Size Open Enclosed 2 Pole DC HP Ratings 115V 230V 500V 575V NO NC Catalog Number List Price $
2 4 8 12
32 75 220 330
29 68 200 300
3 712 25 40
5 15 50 75
10 40 100 150
10 40 100 150
2 2 2 2
2 2 2 2
AC Operated
Auxiliary Contacts Type Ampere Rating Frame Size Open Enclosed 2 Pole DC HP Ratings 115V 230V 500V 575V NO NC Catalog Number List Price $
2 4 8 12
Suffix
32 75 220 330
K2 for 3TC44.
29 68 200 300
3 712 25 40
5 15 50 75
10 40 100 150
10 40 100 150
2 2 2 2
2 2 2 2
Coils, AC
Device Type Frame Size Catalog Number 24V AC 120V AC 220/240V AC 277V AC 480V AC 600V AC List Price $
3TY7403-0AC2 3TY6483-0AC1
Coils, DC
Device Type Frame Size Catalog Number 24V DC 48V DC 110V DC 125V DC 230V DC List Price $
Main Contacts
Type Frame Size Catalog Number List Price $
Arc Chutes
Type Frame Size Catalog Number List Price $
1 1 1 1 1
1 1 1
1
For
contact kits for size 3TC48 and larger include springs. Smaller sizes do not. On DC operated contactors the maximum number of auxiliary contacts is 2 NO, 2 NC.
use in dusty atmosphere and electronic circuits with rated operational currents Ie AC-14 and DC-13 from 1 mA to 300 mA at 3V to 60V. With 1 changeover contact. Discount Code: DC Contactors
2/202
DC Power Controls
DC Contactors
Specifications
Type 3TC general purpose contactors meet or exceed the requirements of NEMA, UL, CSA, IEC, VDE and other international standards. Information on approvals in Section 1.
Application
These contactors can be used for starting of DC motors where the starting current does not exceed 10 times the current corresponding to the horsepower rating of the contactor. The ratings given in the Contactor Ratings Table apply for the double-pole switching of loads or when the two contact paths of the contactor are connected in series. When only one contact is used, the values given can be switched at voltages up to 220V.
Mounting
Mounting positions
3TC44
Type 3TC DC contactors are primarily used in mining, steel mills, and other heavy duty industrial applications. These contactors are designed for continuous operation and they are used to remotely control DC drives, cranes, hoists, heaters and lamps as well as such apparatus as battery-chargers, plating equipment and transit systems.
3TC48 to 3TC56
The contactors must be mounted in the position indicated in drawing. Contactors can be tilted up to 22.5 off the vertical.
Technical Data
Contactor Type Unit of Measure 3TC44 3TC48 3TC52 3TC56
/
VDE/IEC in operation when stored
V V C C
600 800
600 800
600 800
600 800
Permissible ambient temperature ranges Coil ratings (cold coil, 1.0 Uc ) DC operation AC Operation
25 to 55 (13F to 131F) 50 to 80 (58F to 176F) 10 19 10 19 73 (78%) 365 (45%) 9 (27%) 35 (26%) 0.8 to 1.1 times rated control voltage (Uc ) 30 30 730 (38%) 56 (24%) 86 86 2140 (30%) 140 (29%)
(Pf %)
W W VA % VA %
Coil voltage tolerances Operating times (valid for 20% undervoltage, 10% overvoltage, cold or warm coil) Total break time opening delay arcing time DC operation closing delay ms opening delay ms arcing time ms AC operation closing delay opening delay Resistance to shock (rectangular pulse) ms ms g/ms AWG AWG
35190 1025 20 1040 525 7.5/ 5 3.4/10 (2) 148 (2) 1814
110400 40110 20 2050 1030 12 / 5 5.5/10 (2) 250 MCM (2) 1814
Conductor sizes Main conductor: stranded Auxiliary conductor: stranded Switching frequency in make/break operations per hour (1/h) DC and AC operation with resistive load DC1 duty with inductive load DC2 and DC4 duty DC3 and DC5 duty
3TC44 to 3TC56
max. 600V AC
2/203