Академический Документы
Профессиональный Документы
Культура Документы
Component
Operating System Windows Server 2012 Mailbox and/or Client Access Windows Server 2008 R2 Standard or Enterprise with Service Pack 1 Server Role Windows Server 2008 R2 Datacenter RTM or later Windows Server 2012 Windows Server 2008 R2 Standard/Enterprise with SP1 Management Tools Windows Server 2008 R2 Datacenter RTM or leter Windows 8 Release 64-bit edition Windows 7 64-bit edition with SP1
Operating System Windows Server 2012 Windows Server 2008 R2 Standard/Enterprise Windows Server 2008 Standard/Enterprise (32-bit or 64-bit)
Windows Server 2003 Standard Edition with Service Pack 2 (SP2) or later (32-bit or 64-bit) Windows Server 2003 Enterprise Edition with SP2 or later (32-bit or 64-bit) Windows Server 2012 Windows Server 2008 R2 Standard or Enterprise Windows Server 2008 Standard or Each Active Directory site should have Enterprise (32-bit or 64-bit) at least one global catalog server Windows Server 2008 R2 Datacenter running any of the following: RTM or leter Windows Server 2008 Standard/Enterprise (32-bit or 64-bit) Windows Server 2008 Datacenter RTM or later Windows Server 2003 forest functionality Active Directory forest mode or higher
Once the above requirements are verified for consistency, proceed with the following preparation tasks on the server/computer which will be used to prepare the Active Directory using the Exchange Server 2013 Active Directory Prepare module.
Please note that .Net Framework 4.5 and Windows Management Framework 3.0 are already included and is not required for download or installed with Windows Server 2012 therefore skipping steps 1 and 2.
1. Download and Install Microsoft .Net Framework 4.5 2. Download and Install Windows Management Framework 3.0
3. Open a Windows PowerShell session by navigating to Start > All Programs > Accessories > Windows PowerShell and enter the following command; Install-WindowsFeature RSAT-ADDS
3.2 Windows Server 2012 prerequisites for Client Access Server role
The following section instructs the prerequisite installation that should be performed in a server running a standalone Exchange 2013 server with the Client Access Server Role.
1. Open a Windows PowerShell session by navigating to Start > All Programs > Accessories > Windows PowerShell. 2. Run the following command to install the required Windows components.
Install-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NETFramework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, WebMgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, WebClient-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-RequestMonitor, Web-Server, Web-Stat-Compression, Web-Static-Content, WebWindows-Auth, Web-WMI, Windows-Identity-Foundation
1. After installing the required server roles and features, Download and Install the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit software.
3.3 role
1. After installing the required server roles and features, Download and Install the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit
software.
2. For Exchange Server 2013, Microsoft Visual C++ 11 beta redistributable (x64) component should be removed from the system. To do that navigate to
3. Select Visual C++ 11 Beta Redistributable (x64) 11.0.50531 component from the program list and click Uninstall. 4. In the Microsoft Visual C++ 11 Beta setup, click Uninstall. 5. Click close once the uninstallation wizard completes. 6. Download and Install the Microsoft Office 2010 Filter Pack 64 bit software.
7. Download and Install the Microsoft Office 2010 Filter Pack SP1 64 bit.
1. Once the execution completes, run the below command followed by an ENTER. setup /PrepareAD /OrganizationName:<organization name> /IAcceptExchangeServerLicenseTerms
4. Once the setup is finished copying files on the Copying File page, click Next.
5. The Introduction page gives additional guidance for the installation procedure. Review the content and Click next to continue.
6. On the License Agreement page, review the terms. If you agree to the terms, select I accept the terms in the license agreement, and then click next.
7. On the Error Reporting page, select whether you want to enable or disable the Exchange Error Reporting feature, and then click next.
8. On the Checking Required Software page, wait for the Setup to verify for prerequisite software checking to finish. If any applications are listed, install them and then run Setup again. If all required software is found, click next to
continue.
9. On the Server Role Selection page, choose whether to install the Mailbox role, the Client Access role or both roles on the server. For this guide both server
10. On the Installation Space and Location page, either accept the default installation location or click Browse to choose a new location with adequate
storage space.
11. One of the new features of Exchange 2013 is the Malware Protection. If installing the Mailbox role a Malware Protection Settings page will appear.
12. If installing the Client Access server role, on the Configure Client Access Server external domain page, choose an option to suite your deployment. If selecting This Client Access server will be Internet-facing if the Client Access server youre installing will be accessible from the Internet. Enter a domain name to use to configure your Client Access servers. If not, keep the space blank and
13. On the Customer Experience Improvement Program page, choose an appropriate option, and then click Next to proceed.
14. On the Readiness Checks page, view the status to determine if the organization and server role prerequisite checks completed successfully.If unsuccessful, perform the required tasks and click Back, and Next to run the
16. Once the setup completes the installation, on the Completion page, click Complete.
2. Navigate to the bellow URL. https://<fully qualified domain name (FQDN) of Client Access server>/ECP
3. Enter your username and password in Domain\user name and Password and then click sign in.