Академический Документы
Профессиональный Документы
Культура Документы
DESCRIPTION
Cola®Lube 3410, an ashless, oil soluble, complex long chainlength aliphatic phosphate
ester, provides outstanding extreme pressure (EP), anti-wear, lubricity, and corrosion
inhibition properties in a variety of metalworking fluid formulations. While developed for
use in severe drawing and stamping applications, it can be readily utilized in synthetic,
semi-synthetic, soluble oil and straight oil based systems for use in ferrous, non-ferrous,
and stainless steel metalworking. Also, it is effective in increasing the OK Timken Load
in gear oils. Cola®Lube 3410 is supplied in the free acid form and contains no heavy
metals.
A guide to follow for replacing a chlorinated paraffin is to work on a one for one basis,
Cola®Lube 3410 for % Chlorine. An example, a cutting oil contains 6% of a 50%
Chlorinated Paraffin bringing to the formula 3% Chlorine, therefore, one would substitute
in the product, 3% Cola®Lube 3410.
PERFORMANCE DATA
Falex® EP Test – ASTM D3233 (05.02)
Direct Load Torque Reading
Direct Load (Lbs. Max.)
3500 70
3000 60
2500 50
2000 40
1500 30
1000 20
500 10
0 0
COLALUBE 3410 EPL Chlorinated Paraffin Doverlube NCL-280 ELCO 654
(42%)* (Dover Chemical (The Elco Corp.)
Corp.)
225 Colonial Drive South Pittsburg, TN 37380 Ph: 423-837-8800 Fax: 423-837-3888
This graph illustrates that Cola®Lube 3410 outperformed chlorinated paraffin and two
other competitive products in the Falex EP test. Cola®Lube 3410 did not experience pin
failure, even at maximum load, and still maintained a low torque reading.
3% Cola®Lube 3410 and competitive products in 100 Second Naphthenic Oil
* 8% Chlorinated Paraffin in 100 Second Naphthenic Oil
Drawbead Test
The effectiveness of Cola®Lube 3410 in reducing the force required to pull a cold rolled
steel strip through a 3 beaded die is illustrated below.
NOTE: A lower drawbead efficiency number corresponds to an additive more effectively
reducing this force.
COLALUBE 3410
140
Draw Bead Efficiency
80 Doverlube NCL-280
(Dover Chemical Corp.)
60
ELCO 654
40 (The ELCO Corp.)
20 Mayfree 133 (Mayco Oil
0 & Chemical Corp.)
Pale Oil (100SUS)
TYPICAL PROPERTIES
Appearance Clear Brown Liquid
Acid Value (pH 5.0) 60
Specific Gravity (25°C) 0.98
% Activity 100
TYPICAL FORMULATIONS
Oil Based Drawing/Stamping Fluid Heavy Duty Synthetic
Drawing/Stamping Fluid
Cola®Lube 3410 provides lubricity, EP and This formulation is ideal for stamping hot or
contributes to the corrosion protection cold rolled steel.
properties in this heavy-duty
stamping/drawing fluid.
% by % by
weight weight
Paraffinic Oil (300SUS/100) 90.0 Cola®Lube 3410 15.0
Cola®Lube 3410 10.0 Triethanolamine (99%) 30.0
225 Colonial Drive South Pittsburg, TN 37380 Ph: 423-837-8800 Fax: 423-837-3888
100.0 Cola®Lube 3414 20.0
Water 35.0
100.0
Procedure: Add in the order listed with
agitation.
225 Colonial Drive South Pittsburg, TN 37380 Ph: 423-837-8800 Fax: 423-837-3888