Академический Документы
Профессиональный Документы
Культура Документы
Features
Gauge pressure measurement spans from 0.007 to 42 MPa using four sensors, which turndown ratio is up to 60:1. Differential pressure measurement spans from 0.12 to 2100 kPa using four sensors, which turndown ratio is up to 60:1. Absolute pressure versions by option. Digital HART and 4 to 20 mA output signal. Digital Profibus-PA or FOUNDATION Fieldbus output signal by option. Digital precision, stability and resolution ensure top measurement performance. Silicon sensor technology has been fieldproven in hundreds of thousands of process installations in various applications. Supply voltage from 11.5 to 42 V DC according to loop load. Signal damping 0.00, 0.25, 0.50, 1, 2, 4, 8, 16 or 32 seconds. Fail signal selection to low limit (3.60 mA) or to high limit (21.00 mA) of the mA signal. Sensor wetted parts AISI 316L ss. Housing material AISI 316 ss. Housing meets IEC IP 65. ATEX EEX ia IIC T4 (*) All transmitters are suitable for use with LYTH pressure seals.
Accuracy
0.075 % of calibrated span.
Stability
Long-term drift is less than 0.02 % of URL per year over a 5-year period.
Tehdas:
OY LYTH-INSTRUMENT AB Phone: +358 19-760 330 Fax: +358 19-722 085 Peltosaarenkatu 8 FIN- 11130 RIIHIMKI FINLAND e-mail: firstname.lastname@lyth.fi Internet: http://www.lyth.fi
Ordering information
LF. Model Type Rangeability 0 - +7 / 210 kPa ( 0 - +0.07 IGP10-C P-transmitter 0 - +0.07 / 2.1 MPa ( 0 - +0.7 IGP10-D 0 - +0.7 / 21 MPa ( 0 - +7 IGP10-E 0 - +14 / 42 MPa ( 0 - +140 IGP10-F Electronics version and output signal Intelligent, digital HART and 4 to 20 mA T Intelligent, digital FOUNDATION Fieldbus F Intelligent, digital Profibus PA P Digital without communication, 4 to 20 mA, including LCD local indicator A Transmitter's process connection G " male thread R7 NPT " male thread 7 Body Diaphragm Fill fluid 00C AISI 316 / AISI 316 / Silicone 00F AISI 316 / AISI 316 / Inert Other LCD local indicator LCD Electrical classification ATEX EEx ia IIC T4 (*) / / / / 2.1 21 210 420 bar bar bar bar ) ) ) )
LF.
IGP10-D -T
-R7
-00C
LF. Model IDP10-A IDP10-B IDP10-C IDP10-D Type D/P transmitter Rangeability 0 - 0.12 / 7.5 kPa ( -75 - +1.2 0 - 0.87 / 50 kPa ( -500 - +8.7 0 - 7 / 210 kPa ( -1 - +0.07 0 - 0.07 / 21 MPa ( -1 - +0.7 Electronics version and output signal Intelligent, digital HART and 4 to 20 mA Intelligent, digital FOUNDATION Fieldbus Intelligent, digital Profibus PA Digital without communication, 4 to 20 mA, including LCD local indicator Transmitter's process connection Flange with NPT 1/4 " female thread 4 Body Diaphragm Fill fluid 00C AISI 316 / AISI 316 / Silicone 00F AISI 316 / AISI 316 / Inert Other LCD local indicator LCD Electrical classification ATEX EEx ia IIC T4 (*) / / / / 75 500 2.1 21 mbar mbar bar bar ) ) ) )
T F P A
LF. IDP10-C
-T
- 4
-00C
* pending
Tehdas: OY LYTH-INSTRUMENT AB Phone: +358 19-760 330 Fax: +358 19-722 085 Peltosaarenkatu 8 FIN- 11130 RIIHIMKI FINLAND e-mail: firstname.lastname@lyth.fi Internet: http://www.lyth.fi