Академический Документы
Профессиональный Документы
Культура Документы
Description
Pultrusion is a cost-e ective, continuous process for producing ber-reinforced composite parts. Panex 35 carbon ber tows are fed into our proprietary impregnation and curing process that creates smooth carbon ber laminates that provide e cient laydown when building thickness. The speci c ber alignment achieved with pultrusion delivers consistently better overall properties in laminates than any other composite manufacturing process.
Product Applications
Wind Energy (pre-cured carbon composite as the structural member of the turbine blade) Infrastructure Building & Repair O shore Drilling Mining Other Structural Reinforcement Applications
Performance Properties
High-Strength High-Sti ness Low Density Corrosion Resistant High Fiber Volume Nearly Zero Void Content Locked-in Filament Alignment
Plates: Composite Properties Resin Type Tensile Strength Tensile Modulus Density Strain (elongation at break) Epoxy 2350 MPa 155 GPa 1.6 g/cm 1.4%
SI
US
Zoltek Corporation | 3101 McKelvey Rd. | St. Louis, MO 63044 P: +1-314-291-5110 | F: +1-314-291-8536 | E: sales@zoltek.com | W: www.zoltek.com
SI
US
Certi cation Panex 35 Pultruded Pro les are manufactured in accordance with Zolteks written and published data. A Certi cate of Conformance is provided with each shipment.
Safety Obtain, read, and understand the Material Safety Data Sheet (MSDS) before use of this or any other Zoltek product.
Zoltek Corporation | 3101 McKelvey Rd. | St. Louis, MO 63044 P: +1-314-291-5110 | F: +1-314-291-8536 | E: sales@zoltek.com | W: www.zoltek.com
0213