Академический Документы
Профессиональный Документы
Культура Документы
Ludwig-Hfler-Gasse 2
A- 2340 Mdling
Tel.: 0043 (0) 2236 893613 - 24
Fax.: 0043 (0) 2236 893613 - 13
aFLAT-series
Flat Panel Controller
CRTtoLCD-8
Contents
1.
2.
INTRODUCTION ...................................................................................................... 3
2.1
3.
Temperature ................................................................................................ 8
Humidity....................................................................................................... 8
CONNECTOR........................................................................................................... 9
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
6.
Mechanical Specifications............................................................................ 6
Module Dimensions ..................................................................................... 6
Weight.......................................................................................................... 6
Electrical Specifications ............................................................................... 6
Supply Voltage............................................................................................. 6
Supply Voltage............................................................................................. 6
Supply Current at 25C ................................................................................ 6
Panel Current at 25C.................................................................................. 7
Safety instruction ......................................................................................... 7
5.
SPECIFICATIONS.................................................................................................... 6
3.1
3.1.1
3.1.2
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
4.
CONFIGURATION ................................................................................................. 15
6.1
6.2
6.3
6.4
6.5
CRTtoLCD-8
7.
ON SCREEN DISPLAY.......................................................................................... 16
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.1.5
7.1.6
7.1.7
7.1.8
7.2
7.2.1
7.2.2
7.2.3
7.2.4
7.2.5
7.2.6
7.3
7.3.1
7.3.2
7.3.3
7.3.4
7.3.5
7.3.6
7.3.7
7.4
7.4.1
7.4.2
7.4.3
7.4.4
7.4.5
7.4.6
7.4.7
7.5
7.5.1
7.5.2
7.5.3
7.5.4
7.5.5
7.5.6
7.6
7.6.1
7.6.2
7.6.3
7.6.4
7.6.5
7.6.6
7.7
CRTtoLCD-8
Image Menu............................................................................................... 17
Brightness.................................................................................................. 17
Contrast ..................................................................................................... 17
Hue ............................................................................................................ 17
Saturation .................................................................................................. 17
Sharpness.................................................................................................. 17
Backlight .................................................................................................... 17
Color .......................................................................................................... 17
Exit............................................................................................................. 17
Color Menu ................................................................................................ 18
Auto Color.................................................................................................. 18
Color Temperature..................................................................................... 18
Red ............................................................................................................ 18
Green......................................................................................................... 18
Blue............................................................................................................ 18
Exit............................................................................................................. 18
Display Menu ............................................................................................. 19
Auto Configuration ..................................................................................... 19
Display Image ............................................................................................ 19
Phase......................................................................................................... 19
Clock.......................................................................................................... 19
Horizontal Postion...................................................................................... 19
Vertical Position ......................................................................................... 19
Exit............................................................................................................. 19
Video Processing Menu ............................................................................. 20
Deinterlacing.............................................................................................. 20
Film Mode .................................................................................................. 20
DCDi .......................................................................................................... 20
TNR ........................................................................................................... 20
CCR ........................................................................................................... 20
Decoder Settings ....................................................................................... 20
Exit............................................................................................................. 20
Decoder Menu ........................................................................................... 21
Brightness.................................................................................................. 21
Contrast ..................................................................................................... 21
Hue ............................................................................................................ 21
Saturation .................................................................................................. 21
Sharpness.................................................................................................. 21
Exit............................................................................................................. 21
System Menu............................................................................................. 22
Input Select................................................................................................ 22
Osd Settings .............................................................................................. 22
Test pattern................................................................................................ 22
Factory Reset ............................................................................................ 22
Logo Settings............................................................................................. 22
Exit............................................................................................................. 22
Osd Settings Menu .................................................................................... 23
7.7.1
7.7.2
7.7.3
7.7.4
7.7.5
7.7.6
7.8
7.8.1
7.8.2
7.8.3
7.8.4
7.8.5
7.9
7.9.1
7.9.2
7.9.3
8.
SERIAL OSD.......................................................................................................... 26
8.1
8.1.1
8.1.2
8.1.3
8.2
8.2.1
8.3
8.3.1
8.3.2
8.3.3
8.3.4
8.4
8.4.1
8.4.2
8.4.3
8.4.4
8.5
8.5.1
8.5.2
8.6
8.6.1
8.6.2
8.6.3
8.6.4
8.6.5
8.7
8.7.1
8.8
8.8.1
8.8.2
CRTtoLCD-8
Settings...................................................................................................... 26
Connect / Disconnect................................................................................. 26
Auto update ............................................................................................... 26
Device Information ..................................................................................... 26
Input Select................................................................................................ 26
Input Selection ........................................................................................... 26
Picture Adjustments ................................................................................... 27
Horizontal / Vertical Position ...................................................................... 27
Phase......................................................................................................... 27
Horizontal / Vertical Position ...................................................................... 27
Sharpness.................................................................................................. 27
Color Adjustments...................................................................................... 28
Brightness.................................................................................................. 28
Contrast ..................................................................................................... 28
Saturation .................................................................................................. 28
Hue ............................................................................................................ 28
Advanced Color ......................................................................................... 28
Color Temperature..................................................................................... 28
User Red/Green/Blue................................................................................. 28
Video.......................................................................................................... 29
Deinterlace................................................................................................. 29
Flim mode .................................................................................................. 29
DCDI .......................................................................................................... 29
TNR ........................................................................................................... 29
CCR ........................................................................................................... 29
Scaling ....................................................................................................... 30
Scaling Type .............................................................................................. 30
OSD Settings ............................................................................................. 31
Horizontal / Vertical Position ...................................................................... 31
Timer.......................................................................................................... 31
8.8.3
8.8.4
8.8.5
9.
Blend.......................................................................................................... 31
Reset to Default ......................................................................................... 31
Save Settings............................................................................................. 31
CRTtoLCD-8
1. User Information
1.1
This document provides information about products from ECOUNT Consulting GmbH and/or
its subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt
has been made to ensure that the information in this document is accurate, the information
contained within is supplied as-is and is subject to change without notice.
For the circuits, descriptions and tables indicated, eCOUNT assumes no responsibility as far
as patents or other rights of third parties are concerned.
1.2
Copyright Notice
1.3
Trademarks
1.4
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International
Business Machines Corp.
Standards
CRTtoLCD8
01.07.2010
1.5
Warranty
1.6
Technical Support
Technicians and engineers from ECOUNT Consulting GmbH and/or its subsidiaries are
available for technical support. We are committed to making our product easy to use and will
help you use our products in your systems.In any case you can always contact your
CRTtoLCD8
01.07.2010
2. Introduction
The CRTtoLCD-8 is a highly integrated TFT panel interface controller, which allows an easy
adaptation of standard video input sources like S-video, composite video, DVI or analog
RGB to a LVDS TFT panel. The CRTtoLCD-8 only needs one single wide range 12V 24V
power supply and incorporates all needed functionality to build up a full featured TFT
monitor. The card generates the necessary power sequencing for the flat screen. The highly
flexible architecture of the CRTtoLCD-8 panel interface allows adapting nearly any available
TFT panel. Therefore a variety of panel adapters and programming are available on request.
CRTtoLCD8
01.07.2010
2.1
Features
- Scaling (all resolutions from VGA to SXGA)
- Frame rate conversion
- Integrated 8-bit triple-channel ADC / PLL
- Integrated Ultra-Reliable DVITM receiver
- On-chip versatile OSD engine
- Programmable gamma correction (CLUT)
Analog RGB Input Port
- Supports up to 165MHz (up to UXGA 60Hz reduced blanking)
- Support for Sync-on-Green (SOG)
Ultra-Reliable DVITM Receiver
- Single link on-chip TMDS Rx up to 160 MHz operation
- Direct connect to all DVI compliant TMDS transmitters
NTSC,PAL or SECAM input
- video decoder with s-video and composite video input capabilities
Output Format
- Support for 8 or 6-bit panels (with high quality dithering)
- Singel / Dual Channel LVDS Output
Auto-Configuration / Auto-Detection
- Phase and image positioning
- Input format detection
- Compatibility with all graphic cards and standard VESA modes
Frame Store Interface
- 4 MB SDRAM Frame buffer
On-chip OSD Controller
- Bit-mapped OSD capability
- Horizontal and vertical stretch of OSD images
Operating Modes
- Frame rate conversion and scaling of images
- Bypass mode with no filtering and/or frame buffering
- 1:1 centering
- De-interlaced zoom
- Frame Sync and Free Run display synchronization modes
High-Quality Advanced Scaling
- Fully programmable zoom/shrink ratios
- Variable sharpness control
- Moire cancellation
- Adjustable scaling algorithms
CRTtoLCD8
01.07.2010
CRTtoLCD8
01.07.2010
3. Specifications
3.1
Mechanical Specifications
Height 16,5 mm
3.1.2 Weight
3.2
200 g
Electrical Specifications
12 - 24V DC 3%
CRTtoLCD8
01.07.2010
x1
By 12V input VCC, Panel VCC or Backlight VCC = input VCC max. 300mV.
x2
CRTtoLCD8
01.07.2010
4. Environmental Specifications
4.1
Temperature
Note:
4.2
Non operating:
-10 to +85 C
(*) The maximum operating temperature is the maximum measurable temperature on any spot on a
mo- dules surface. You must maintain the temperature according to the above specification.
Humidity
Operating:
Non operating:
CRTtoLCD8
01.07.2010
5. Connector
5.1
4 contact connector, single row, right angle, 2.5 mm pitch, (Tyco, 171826-4 or equivalent).
Mating connector Tyco, 171822-4 or equivalent.
5.2
Pin
Function
Not connected
Power Ground
Power Ground
Input DC Power
5.3
Pin
Function
1 (center)
Input DC Power
2 (outside)
Power Ground
Pin
Function
Not connected
Analog Ground
10
Analog Ground
11
Not connected
12
13
14
15
CRTtoLCD8
01.07.2010
5.4
5.5
Pin
Function
TMDS Data 2-
TMDS Data 2+
Power Ground
Not connected
Not connected
Not connected
TMDS Data 1-
10
TMDS Data 1+
11
Power Ground
12
Not connected
13
Not connected
14
15
Power Ground
16
17
TMDS Data 0 -
18
TMDS Data 0+
19
Power Ground
20
Not connected
21
Not connected
22
Power Ground
23
TMDS Clock+
24
TMDS Clock-
C5
Not connected
Pin
Function
1 (outside)
Power Ground
2 (center)
CRTtoLCD8
01.07.2010
10
5.6
5.7
Pin
Function
Power Ground
Power Ground
Intensity (Luminace)
Color (Chrominance)
Function
Power Ground
10
11
12
13
14
Power Ground
15
16
17
Power Ground
18
19
20
21
22
23
24
Power Ground
25
I2C Data
26
27
I2C Clock
28
Panel VCC *
29
Panel VCC *
30
Panel VCC *
CRTtoLCD8
01.07.2010
11
5.8
Pin
Function
Power Ground
Power Ground
Backlight Power
Backlight Power
Backlight Power
Backlight Power
Power Ground
Power Ground
10
Brightness *
5.9
Pin
Function
Power Ground
Power Ground
Backlight Power
Backlight Power
Backlight Power
Backlight Power
Power Ground
Power Ground
10
Brightness *
11
I2C Data
12
I2C Clock
CRTtoLCD8
01.07.2010
12
5.10
5.11
Pin
Function
LED Enable
KEY (Confirm)
KEY (OSD)
KEY (Down)
KEY (Up)
Serial Transmit
Serial Receive
Switch LED
10
KEY (ON/OFF)
11
Not connected
12
13
Power Ground
14
Power Ground
Pin
Function
Power Ground
Analog Input 1
Analog Input 2
Power Ground
CRTtoLCD8
01.07.2010
13
5.12
Pin
Function
Serial Receive
Serial Transmit
Power Ground
CRTtoLCD8
01.07.2010
14
6. Configuration
6.1
Panel Configuration
6.2
Caution! Only one configuration for flatpanel is allowed, otherwise the board is permanently
damaged.
6.3
Pin
Function
Open
Panel +3.3V
12
Panel +5V
3-4
Panel +12V
5-6
Caution! Only one configuration for backlight is allowed, otherwise the board is permanently
damaged.
6.4
Pin
Function
1-2
2 -3
Caution! Only one configuration for backlight is allowed, otherwise the board is permanently
damaged.
6.5
Pin
Function
1-2
0V 5V Level
2-3
0V 12V Level
Caution! Only one configuration for backlight is allowed, otherwise the board is permanently
damaged.
Pin
Function
1-2
Analog / Linear
2-3
CRTtoLCD8
01.07.2010
15
7. On Screen Display
With the OSD (On Screen Display) you can modify the settings and control the special
features of the CRTtoLCD-8. The OSD uses a number of menus for making changes and
turning the special features on or off. The configuration can be done via the OSD-keypad
(OSD-Panel-Kit).
To start the OSD press the OSD button on the keypad, after switching the power supply
on. If a valid flat panel configuration is installed, the OSD Main Menu will be displayed.
To select a menu point, simply use the UP or DOWN buttons to move the cursor to the
menu point you want to select and presses the button OSD. To get back to the previous
menu point or to exit the current function you have to push the Confirm-button.
CRTtoLCD8
01.07.2010
16
7.1
Image Menu
7.1.1 Brightness
Changes the brightness of the displayed Image.
7.1.2 Contrast
Changes the contrast of the displayed Image.
7.1.3 Hue
Changes the hue of the displayed Image (Only for NTSC/PAl inputs).
7.1.4 Saturation
Changes the saturation of the displayed Image (Only for NTSC/PAl inputs).
7.1.5 Sharpness
Changes the sharpness of the displayed Image.
7.1.6 Backlight
Changes the backlight dimming setting.
7.1.7 Color
Open sub menu for color adjustment
7.1.8 Exit
Return to the main menu level.
CRTtoLCD8
01.07.2010
17
7.2
Color Menu
7.2.3 Red
Changes the intensity of red in the displayed Image (This setting only has an effect when
Color Temperature /USER is selected).
7.2.4 Green
Changes the intensity of red in the displayed Image (This setting only has an effect when
Color Temperature /USER is selected).
7.2.5 Blue
Changes the intensity of red in the displayed Image (This setting only has an effect when
Color Temperature /USER is selected).
7.2.6 Exit
Return to Image menu level.
CRTtoLCD8
01.07.2010
18
7.3
Display Menu
7.3.3 Phase
Adjusts the sampling phase of the displayed image. The phase can only be adjusted for
VGA inputs.
7.3.4 Clock
Adjusts the sampling clock of the displayed image. The clock can only be adjusted for VGA
inputs.
7.3.7 Exit
Return to main menu.
CRTtoLCD8
01.07.2010
19
7.4
7.4.1 Deinterlacing
Controls the type of Deinterlacing used for video signals. None displays each input frame in
consecutive order. Static interleaves two input frames to form an output frame. Madi
(Motion Adaptive De-interlacing) uses a combination of both (none, static) depending on the
amount of motion in the input signal (Only for NTSC/PAl inputs).
7.4.3 DCDi
Controls the Directional Correlation DeInterlacing (Only for NTSC/PAl inputs).
7.4.4 TNR
Turns Temporal Noise reduction on (Only for NTSC/PAl inputs).
7.4.5 CCR
Turns Cross Color Reduction on (Only for NTSC/PAl inputs).
7.4.7 Exit
Return to main menu.
CRTtoLCD8
01.07.2010
20
7.5
Decoder Menu
7.5.1 Brightness
Changes the brightness of the displayed Image in the video decoder (Only for NTSC/PAl
inputs).
7.5.2 Contrast
Changes the contrast of the displayed Image in the video decoder (Only for NTSC/PAl
inputs).
7.5.3 Hue
Changes the hue of the displayed Image in the video decoder (Only for NTSC/PAl inputs).
7.5.4 Saturation
Changes the saturation of the displayed Image in the video decoder (Only for NTSC/PAl
inputs).
7.5.5 Sharpness
Adds an amount of image sharpness to the input signal (Only for NTSC/PAl inputs).
7.5.6 Exit
Return to video processing menu.
CRTtoLCD8
01.07.2010
21
7.6
System Menu
7.6.6 Exit
Return to main menu.
CRTtoLCD8
01.07.2010
22
7.7
7.7.5 Language
Controls the OSD menu language.
7.7.6 Exit
Return to system menu.
CRTtoLCD8
01.07.2010
23
7.8
7.8.5 Exit
Return to system menu.
CRTtoLCD8
01.07.2010
24
7.9
Info Menu
7.9.1 Firmware
Displays the currently active firmware version.
CRTtoLCD8
01.07.2010
25
8. Serial OSD
8.1
Settings
8.2
Input Select
CRTtoLCD8
01.07.2010
26
8.3
Picture Adjustments
8.3.2 Phase
Adjust phase of VGA signal.
8.3.4 Sharpness
Adjust sharpness of the displayed Image.
CRTtoLCD8
01.07.2010
27
8.4
Color Adjustments
8.4.1 Brightness
Adjust brightness of the displayed Image.
8.4.2 Contrast
Adjust contrast of the displayed Image.
8.4.3 Saturation
Adjust saturation of the displayed Image.
8.4.4 Hue
Adjust hue of the displayed Image.
8.5
Advanced Color
CRTtoLCD8
01.07.2010
28
8.6
Video
8.6.1 Deinterlace
Select Deinterlace mode.
None displays each input frame in consecutive order. Static interleaves two input frames to
frorm a output frame.
Madi (Motion Adaptive De-interlacing) uses a combination of both (none, static) depending
on the amout of motion in the input signal.
8.6.3 DCDI
Switch Directional Correlation De-Interlacing (On / Off).
8.6.4 TNR
Swich Turns Temporal Reduction (On / Off).
8.6.5 CCR
Switch Cross Color Reduction (On / Off).
CRTtoLCD8
01.07.2010
29
8.7
Scaling
CRTtoLCD8
01.07.2010
30
8.8
OSD Settings
8.8.2 Timer
Adjust time for the OSD timeout.
8.8.3 Blend
Adjust transparency of the OSD menu.
CRTtoLCD8
01.07.2010
31
Mode standard
720 x 400
70 Hz
DOS
640 x 350
70 Hz
DOS
640 x 400
70 Hz
DOS
640 x 480
59.9 Hz
VGA
640 x 480
60 Hz
VGA
640 x 480
72 Hz
VGA
640 x 480
72,8 Hz
VGA
640 x 480
75 Hz
VGA
640 x 480
85 Hz
VGA
800 x 600
56.25 Hz
SVGA
800 x 600
60 Hz
SVGA
800 x 600
70 Hz
SVGA
800 x 600
72 Hz
SVGA
800 x 600
75 Hz
SVGA
800 x 600
85 Hz
SVGA
1024 x 768
60 Hz
XGA
1024 x 768
70 Hz
XGA
1024 x 768
72 Hz
XGA
1024 x 768
75 Hz
XGA
1024 x 768
85 Hz
XGA
1280 x 1024
60 Hz
SXGA
1280 x 1024
70 Hz
SXGA
1280 x 1024
75 Hz
SXGA
1280 x 1024
85 Hz
SXGA
CRTtoLCD8
01.07.2010
32
APPENDIX A: Layout
CN901
CN200
CN900
28.94mm
CN402
CN301
CN300
114.29mm
CN800
CN400
6.1mm
3.2mm x4
CN401
CN501
6.1mm
CN700
12.27mm
CN100
CN500
179.07 mm
CRTtoLCD8
01.07.2010
33
CN401
10 mm
6.4 mm
CN100
CN700
7.7 mm
7.9 mm
1.5 mm
CN500
12.6 mm
3.1 mm
13.0 mm
3.1 mm
8.3 mm
10.0 mm
12.8 mm
CN501
16.3 mm
25.0 mm
6.4 mm
5.0 mm
6.28 mm
6.5 mm
8.0 mm
24.0 mm
32.5 mm
21.1 mm
36.4 mm
60.35 mm
98.5 mm
139.7 mm
APPENDIX B: Accessories
Part.-No
Description
22010
OSD-Panel-Set
61029
61021
XXXX
XXXX
Description
Firmware 1.8 or 1.9. OSD Blend fuction not supported
CRTtoLCD8
01.07.2010
34
Date
01.072010
Edited by
H.Leipold
Changes
First revision
CRTtoLCD8
01.07.2010
35