Академический Документы
Профессиональный Документы
Культура Документы
Post-tensioning
Bearing systems
Offshore
Special Services
Design
Significant knowledge about ground conditions is required for the analysis. The soil must be slightly over-consolidated and the elastic behaviour depth-wise must be known and modelled properly. The elastomeric elements will have a unique design for each project, and special testing will be performed. 3D FEM analysis is performed by our partner GeoInvent AB.
O2
58 storey building
When the elastic elements are compressed, the total load from the building will be balanced between pile load and accumulated ground pressure. The ground structure will be designed with full soil-structure interaction, together with the bearing capacity of the piles. Excavation depth 23 m Elastic element
The elastomeric quality of EPS has excellent long term durability even when submerged in water. The design lifetime of the rubber used in these types of applications is estimated to be up to at least 100 years. As chloroprene rubber is a relatively new material, ageing tests are performed according to ISO 188.
The following reference list shows projects with permanently installed elastomeric bearings:
Kv. Jagaren, Halmstad. 2004 Kv. Ankarspelet, Malm. 2005 Kv. Salongen, Malm. 2005 Kv. Dockporten, Malm. 2005 Kv. Brygghuset, Malm. 2006 Kv. Jrnbanan. Halmstad. 2007 Kv. Skrovet 5, Malm. 2008 Other permanent installed elastomeric bearings: Siri Platform, Shock Absorbers. 1998 Aasgaard B, Riser Bearings. 1999 Kvitebjrn EPC, Bearings for Living quarters. 2002 Kristin Project, Riser Bearings. 2004 Snhvit LNG Plant. 2004 Several Bearings for FPSO Ships. 2006
O3
Prestressing Norway KB Spennteknikk AS PO Box 1213 N-2206 Kongsvinger Tel. +47 62 81 00 30 Fax +47 62 81 00 55 spennteknikk@spennteknikk.no www.spennteknikk.no
Bearings and joints sweden Spnnteknik SLF AB Sjngsvgen 10 192 72 Sollentuna Tel. +46 (0)8 510 678 10 Fax +46 (0)8 510 678 19 info@spannteknik.se www.spannteknik.se
offshore Ns-EN Iso 9001 Cert. no. 007 Certied Quality System
spennteknikk
Products
BBR prestressing systems CE marked BBR VT CONA CMX strand systems BBR CONA rock anchors BBR Cona-single strand system BBRV wire system BBR stay cable systems Macalloy high strength bar system TOBE pot bearings ELASTO BLOCK bearing system for bridges ELASTO FLON bearing system for bridges LASTO-STRIP bearings for buildings SB-bearings for buldings KBS guide bearings Steel bearings for bridges Special bearings TENSA-LASTIC bridge joint TENSA-GRIP bridge joint ETIC finger joint for bridges TRANSFLEX bridge joint ACME joint for bridges and buildings Elastomeric bearings for platforms and FPSO ships TOBE pot bearings for heavy load and movements Bearings for crane installations Shock absorbers and dampers Sliding bearings Lifting and lowering of bridges and other heavy structures Steel and aluminium products
offshore products
For advanced soil-structure interaction design Our products are produced and assembled in our factory in Kongsvinger, Norway and installed on site.