Use the NOW site _______ utility, to determine the version of Data ONTAP, in which a bug has been fixed.
A. Rawritewin B. Release Comparison C. System Configuration Guide D. NetApp Diagnostics
Answer: B
QUESTION 2:
Choose from the following what best describes the output of the following command. sysstat -s 5
A. Display extended output every five seconds and print a summary upon termination. B. Display the default output every five seconds and terminate after five counts. C. Display the default output every five seconds and print a summary upon termination. D. Display utilization output every five seconds and print a summary upon termination.
Answer: C
QUESTION 3:
To read and analyze a packet trace file generated by the storage appliance, choose TWO of the following which will allow you to do this.
A. Ethereal B. Netmon C. pktt D. Eternal View
Answer: A,B
QUESTION 4:
On reboot, to export volumes and directories automatically, include them in the /etc/exports file. State whether this is true or false.
A. False B. True
Answer: B NS0-121
Actualtests.com - The Power of Knowing
QUESTION 5:
To gather statistics about network interfaces, choose the command on the storage appliance which allows you, including basic information about network connections?
A. netstat -i B. pktt C. netdiag -n D. sysstat 1
Answer: A
QUESTION 6:
Choose from the following what utility on the storage appliance will allow you to capture network packet information.
A. traceroute B. netstat C. pktt D. snoop
Answer: C
QUESTION 7:
Choose from the following the command which is used to display the credentials the storage appliance has stored in memory for a particular user account.
A. wcc B. mem_disp C. showcred D. cifs
Answer: A
QUESTION 8:
Choose from the following which option of the exportfs command will temporarily export a resource while ignoring the options specified in the /etc/exports file.
A. exportfs -v B. exportfs -a C. exportfs -i D. exportfs -u NS0-121
Actualtests.com - The Power of Knowing
Answer: C
QUESTION 9:
Choose one of the following commands which is most appropriate for troubleshooting a multiprotocol authentication problem.
A. priv set advanced B. rdfile /etc/rc C. wcc D. sysstat 1
Answer: C
QUESTION 10:
Choose one of the following commands which adds the share "netapp" to the /vol/vol2/home directory.
A. None of the above B. cifs shares -add netapp /vol/vol2 C. cifs shares -add netapp /vol/vol2/home D. cifs shares -add /vol/vol2/home/netapp
Answer: C
QUESTION 11:
Choose one of the following statements which would NOT apply to an entry in the /etc/exports file regarding exporting directories, qtrees, and volumes?
A. Export each volume separately. B. The storage appliance must resolve host names. C. Export /vol. D. Export ancestors and their descendants.
Answer: C
QUESTION 12:
Choose one of the following definitions which best represents the function of the cifs setup command.
A. It displays the names of all mounted directories on the storage appliance B. It displays the prompts for CIFS configuration information NS0-121
Actualtests.com - The Power of Knowing
C. It displays the mount point of all shared directories D. It displays a list of the users on the storage appliance
Answer: B
QUESTION 13:
CIFS client file access is determined by________ if a qtree security style is UNIX.
A. (Not Allowed) A CIFS client cannot access files in a qtree with a security style of UNIX. B. The last client to set permissions C. NT ACLs D. UNIX permissions, and if the CIFS user name can be mapped to a UNIX user name
Answer: D
QUESTION 14:
Use the NOW site _____ utility, to determine if a problem you are experiencing is known to NetApp,.
A. System Configuration Guide B. Release Comparison C. Ethereal D. Bugs Online
Answer: D
QUESTION 15:
Choose one of the following commands which you would use to view the connection, if an NFS client attempts and fails to access a file opened by a CIFS application.
A. cifs sessions B. cifs lookup C. cifs audit D. cifs shares
Answer: A
QUESTION 16:
The root user is NOT exempt from _______, in Data ONTAP.
A. user quotas NS0-121
Actualtests.com - The Power of Knowing
B. group quotas C. tree quotas D. root quotas
Answer: C
QUESTION 17:
CIFS client file access is determined by ___________ , if a qtree security style is UNIX.
A. (Not Allowed) A CIFS client cannot access files in a qtree with a security style of UNIX. B. UNIX permissions, and if the CIFS user name can be mapped to a UNIX user name C. The last client to set permissions D. NT ACLs
Answer: B
QUESTION 18:
Choose from the following which option should be used with the nfsstat command to assist in decoding export and mountd errors.
A. nfsstat -c B. nfsstat -t C. nfsstat -z D. nfsstat -d
Answer: D
QUESTION 19:
Choose one of the following commands which is NOT a good command for troubleshooting connectivity problems from the storage appliance console.
A. ping B. ifstat C. iostat D. netdiag
Answer: C
QUESTION 20:
Choose one of the following which is NOT part of the UNIX security style.
NS0-121
Actualtests.com - The Power of Knowing
A. GID B. SID C. Other D. UID
Answer: B
QUESTION 21:
Choose one of the following commands which best displays the statistics for the network interface.
A. ifstat B. ifconfig C. netstat D. sysstat
Answer: A
QUESTION 22:
Options nfs.per_client_stats.enable must be turned on, in order to view per client NFS statistics on the storage appliance. Choose whether this statement is true or false.
A. True B. False
Answer: A
QUESTION 23:
To collect statistics on the performance of system resources, (such as CPU, NVRAM, network interfaces, and disks)which command on the storage appliance allows you to do this?
A. sysstat 1 B. netdiag -v C. pktt D. netstat -i
Answer: A
QUESTION 24:
NS0-121
Actualtests.com - The Power of Knowing
Fill in the blank by choosing the appropriate answer for the following statement, given the content of the /etc/quotas file: "A CIFS user named Certkiller can use __________of disk space and 75K files in the /vol/wmv/proj1 qtree."
A. 70MB B. 100MB C. 60MB D. 50MB
Answer: A
QUESTION 25:
The storage appliance supports the use of local groups in managing users and groups, in the Windows environment. Is this statement true or false?
A. True B. False
Answer: A
QUESTION 26:
You need to terminate CIFS on the storage appliance and do a restart for the changes to take effect, if you change the setting for the option cifs.neg_buf_size. State whether this is true or false.
A. True B. False
Answer: A
QUESTION 27:
Choose from the following which command on the storage appliance allows you to collect statistics on the performance of system resources, such as CPU, NVRAM, network interfaces, and disks? NS0-121
Actualtests.com - The Power of Knowing
A. sysstat 1 B. pktt C. netstat -i D. netdiag -v
Answer: A
QUESTION 28:
Choose one of the following operations which might generate this sysstat output.
A. Volume reconstruction B. SnapMirror C. Disk Scrub D. Volume copy
Answer: C
QUESTION 29:
Choose one of the following that will explain what will happen if a soft quota is exceeded.
A. All write operations will fail. B. An SNMP warning message will be generated. C. A spare disk will be added to the volume. D. An autosupport message will be sent.
Answer: B
NS0-121
Actualtests.com - The Power of Knowing
QUESTION 30:
On reboot, to export volumes and directories automatically, you can include them in the /etc/exports file. Choose whether this statement is true or false.
A. True B. False
Answer: A
QUESTION 31:
_______________ could be defined as a quota target.
A. A specific disk space threshold B. The maximum amount of disk space in a volume C. The maximum number of files in a disk D. A user, group, or qtree to which a quota is applied
Answer: D
QUESTION 32:
In which a bug has been fixed, to determine the version of Data ONTAP, use the NOW site _______ utility. Choose the correct answer from the following.
A. System Configuration Guide B. Rawritewin C. Release Comparison D. NetApp Diagnostics
Answer: C
QUESTION 33:
CORRECT TEXT NS0-121
Actualtests.com - The Power of Knowing
As per this example, _____ percent of the RPC calls are write operations. Choose one of the following.
Answer: 87%
Answer: 87
QUESTION 34:
Choose one of the following commands which is most appropriate for troubleshooting a multiprotocol authentication problem.
A. priv set advanced B. sysstat 1 C. rdfile /etc/rc D. wcc
Answer: D
QUESTION 35:
To capture network packet information, choose what utility on the storage appliance will allow you to do this.
A. netstat B. snoop C. pktt D. traceroute NS0-121
Actualtests.com - The Power of Knowing
Answer: C
QUESTION 36:
Choose from the following which command on the storage appliance allows you to gather statistics about network interfaces, including basic information about network connections?
A. netstat -i B. pktt C. netdiag -n D. sysstat 1
Answer: A
QUESTION 37:
Both the Microsoft Windows Administrator and root are exempt from user and group quotas, in Data ONTAP. Choose whether this statement is true or false.
A. False B. True
Answer: B
QUESTION 38:
On the storage appliance, CIFS clients can resolve symbolic links created by NFS clients. Is this statement true or false?
A. True B. False
Answer: A
QUESTION 39:
NS0-121
Actualtests.com - The Power of Knowing
Choose from the following one of these methods which best describes the steps for creating CIFS Shares using FilerView.
A. CIFS ->Shares ->Manage B. CIFS ->Configure ->Setup Wizard C. CIFS ->Shares ->Add D. CIFS ->Configure ->Options
Answer: C
QUESTION 40:
One of the items below is NOT a resource for export. Choose which one.
A. volume B. qtree C. Bsubnet D. directory
Answer: C
QUESTION 41:
NS0-121
Actualtests.com - The Power of Knowing
Fill in the blank space by choosing the appropriate answer for the following statement, given the content of the /etc/quotas file: "The following user name(s) ___________is given an explicit quota of 100 MB of disk space and 75K files in the /vol/wmv/proj1 qtree. This user is also restricted to the default limit of 50 MB of disk space and 15K files."
A. All users B. Certkiller C. lmoe D. None of the above
Answer: C
QUESTION 42:
Choose one of the following which will enable "symlink_strict_security".
A. cifs shares -change <sharename>-symlink_strict_security B. options symlink_strict_security=on C. options cifs.symlink_strict_security on D. options symlink_strict_security=true
Answer: A
QUESTION 43:
Locks are __________, if the client is a CIFS client. From the following choose the correct answer.
A. optional B. ordered C. advisory D. mandatory
Answer: D
QUESTION 44:
NS0-121
Actualtests.com - The Power of Knowing
Only existing /etc/quotas file target entries are affected by the quota resize command, not new target entries. Is this statement true or false? Choose the correct answer.
A. False B. True
Answer: B
QUESTION 45:
Use the NOW site _______ utility to determine the version of Data ONTAP, in which a bug has been fixed. Fill in the correct answer.
A. System Configuration Guide B. Rawritewin C. NetApp Diagnostics D. Release Comparison
Answer: D
QUESTION 46:
What effect will the following command have?
options wafl.default_security_style mixed
A. Set the security style of all files to mixed B. Set the default security style for all newly created volumes C. Change the security style of all volumes to mixed D. Change the security style of all qtrees to mixed
Answer: B
QUESTION 47:
The following troubleshooting steps would be appropriate, if you are receiving RPC timeouts:
1) Verify that the RPC is enabled. 2) Verify that the NFS daemons are running. 3) Verify that the correct mount points have been created.
A. True B. False
Answer: A NS0-121
Actualtests.com - The Power of Knowing
QUESTION 48:
In the /etc/exports file regarding exporting directories, qtrees, and volumes, which of the following statements would NOT apply to an entry?
A. Export ancestors and their descendants. B. Export each volume separately. C. Export /vol. D. The storage appliance must resolve host names.
Answer: C
QUESTION 49:
Choose TWO of the following below which might cause a user to receive a message that there is no space left on a disk.
A. Snap reserve is set to 10%. B. The disk is write protected. C. The user has exceeded his or her quota. D. There is not enough space available on the disk.
Answer: C,D
QUESTION 50:
CORRECT TEXT Which of the following options in the sysstat command will display a summary of statistics.
Answer: S
Answer: -S
QUESTION 51:
When viewing sysstat output, choose one of the following fields which is NOT part of the total number of operations per second.
A. NFS B. FTP C. HTTP D. CIFS
Answer: B NS0-121
Actualtests.com - The Power of Knowing
QUESTION 52:
The time on the storage appliance must be synchronized with the time on the Domain Controller, in order to configure a storage appliance as a member of a Windows 2000 domain. Choose option A or B.
A. False B. True
Answer: B
QUESTION 53:
Based on ___________, NTFS allows file access. Choose one of the following.
A. SID and password B. UNIX permissions C. NT ACLs and UNIX permissions D. NT ACLs and SID
Answer: D
QUESTION 54:
You observe the following, on a newly created qtree,:
* CIFS permissions on the qtree are everyone: full control. * Your Windows users are able to access the share, and can copy, edit, and delete files without issue. * On a Solaris workstation, the super user can mount other qtrees from the same volume.
When the super user attempts to mount the new qtree, he receives an "Access Denied" message. From the following explain what the most likely cause of this error is.
A. The qtree is missing from the /etc/hosts file. B. NFS is turned off on the storage appliance. C. The qtree has not been exported. D. The qtree is set to ntfs only security style.
Answer: C
QUESTION 55:
For analyzing the performance output of an NFS client to the storage appliance, choose from the following which are the correct methods. NS0-121
Actualtests.com - The Power of Knowing
1) Time the mkfile command for a write test. 2) Time the dd command for a read test. 3) Time the cp command for a read and write test. 4) Verify your results with the nfsstat -c command.
A. 3 and 4 B. All four methods C. 1 and 4 D. 2 and 4
Answer: B
QUESTION 56:
Choose one of the following commands which you would use to set up the network interface.
A. traceroute B. ifstat C. ping D. ifconfig
Answer: D
QUESTION 57:
Choose from the following which definition best represents the function of the cifs setup command.
A. It displays the names of all mounted directories on the storage appliance B. It displays the prompts for CIFS configuration information C. It displays the mount point of all shared directories D. It displays a list of the users on the storage appliance
Answer: B
QUESTION 58:
Exhibit
NS0-121
Actualtests.com - The Power of Knowing
From this sysstat output, what can you determine? (No other load is on the storage appliance except the CIFS traffic shown.)
A. The storage appliance is overloaded. B. The volume being written to is almost full. C. The volume being written to is a 2-disk volume. D. The volume being written to is an 8-disk volume.
Answer: C
QUESTION 59:
Which of the following commands adds the share "netapp" to the /vol/vol2/home directory?
A. cifs shares -add netapp /vol/vol2/home B. cifs shares -add /vol/vol2/home/netapp C. cifs shares -add netapp /vol/vol2 D. None of the above
Answer: A
QUESTION 60:
Exhibit:
NS0-121
Actualtests.com - The Power of Knowing
Which one of these methods best describes the steps for creating CIFS Shares using FilerView?
A. CIFS ->Configure ->Options B. CIFS->Shares->Manage C. CIFS->Configure->Setup Wizard D. CIFS->Shares->Add
Answer: D
QUESTION 61:
Given the content of the /etc/quotas file, select the appropriate answer for the following question:
NS0-121
Actualtests.com - The Power of Knowing
What would the default limit for the user wesson for the volume /vol/wmv be if their explicit quota of 75 MB of disk space and 75K files was removed from the /etc/quotas file?"
A. 50MB disk space, 15K files B. 750MB disk space, 85K files C. 100MB disk space, 75K files D. 75MB disk space, 75K files
Answer: A
QUESTION 62:
In Data ONTAP the root user is NOT exempt from _______.
A. Group quotas B. User quotas C. Tree quotas D. Root quotas
Answer: C
QUESTION 63:
In a multiprotocol deployment of Data ONTAP, the Microsoft Windows Built-in Administrator is mapped to root and thereby is authenticated as UID 0 and therefore is exempt from user and group quotas.
A. True B. False
Answer: A
QUESTION 64:
In a multiprotocol deployment of Data ONTAP the Microsoft Windows Built-in Administrator is mapped to root and thereby is authenticated as UID 0; therefore the Windows Built-in Administrator is NOT exempt from the restrictions imposed by a tree type quota.
A. True B. False
Answer: A
NS0-121
Actualtests.com - The Power of Knowing
QUESTION 65:
If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the storage appliance and do a restart for the changes to take effect.
A. True B. False
Answer: A
QUESTION 66:
Which two of the following cp types would indicate a busy storage appliance?
A. cp_from_timer B. cp_from_log_full C. cp_from_cp D. cp_from_busy
Answer: BC
QUESTION 67:
Which command on the storage appliance allows you to collect statistics on the performance of system resources such as CPU, NVRAM, network interfaces, and disks?
A. sysstat 1 B. netdiag -v C. pktt D. netstat -i
Answer: A
QUESTION 68:
To determine the version of Data ONTAP in which a bug has been fixed, you use the NOW site _______ utility.
A. System Configuration Guide B. Netapp Diagnostics C. Release Comparison Tool D. Rawritewin
Answer: C
NS0-121
Actualtests.com - The Power of Knowing
QUESTION 69:
To determine if the problem you are seeing with your system is known to NetApp, use the NOW site _____ utility.
A. System Configuration Guide B. Bugs Online C. Release Comparison Tool D. Ethereal
Answer: B
QUESTION 70:
Which two utilities allow you to read and analyze a packet trace file generated by the storage appliance?
A. pktt B. Sniffer C. Eternal View D. Ethereal
Answer: BD
QUESTION 71:
Which of the following definitions best represents the function of the cifs setup command?
A. Displays the mount point of all shared directories B. Displays the names of all mounted directories on the filer C. Displays the prompts for CIFS configuration information D. Displays a list of the users on the filer
Answer: C
QUESTION 72:
What utility on the storage appliance will allow you to capture network packet information?
A. netmon B. snoop C. pktt D. traceroute NS0-121
Actualtests.com - The Power of Knowing
Answer: C
QUESTION 73:
What command on the storage appliance allows you to gather statistics about network interfaces, including basic information about network connections?
A. sysstat 1 B. netstat -m C. pktt D. netstat -i
Answer: D
QUESTION 74:
If a volume is configured with mixed size disks, performance issues occur when the smaller disks are full and activity is limited to the larger disks.
A. True B. False
Answer: A
QUESTION 75:
To configure a storage appliance as a member of a Windows 2000 domain, the time on the filer has to be within ___ minutes of the time on the Domain Controller.
A. 2 B. 5 C. 10 D. 20
Answer: B
QUESTION 76:
Exhibit:
NS0-121
Actualtests.com - The Power of Knowing
Which of the following operations might generate this sysstat output?
A. Disk Scrub B. Volume copy C. SnapMirror D. Volume reconstruction
Answer: A
QUESTION 77:
Given the content of the /etc/quotas file, fill in the blank by selecting the appropriate answer for the following statement:
"A CIFS user named wesson can use of disk space and 75K files in the /vol/wmv/proj1 qtree."
A. 50MB B. 100MB C. 60MB D. 70MB
Answer: D
QUESTION 78:
Your storage appliance favors a Domain Controller located_________ . NS0-121
Actualtests.com - The Power of Knowing
A. In the same building as the storage appliance B. Based on the storage appliance's /etc/cifssec file C. On the same subnet as the storage appliance D. Connected via a Wide Area Network
Answer: C
QUESTION 79:
CIFS file locking is __________.
A. Stateless and utilizes advisory locks B. Stateless and utilizes mandatory locks C. Stateful and utilizes advisory locks D. Stateful and utilizes mandatory locks
Answer: D
QUESTION 80:
NFS versions 2 and 3 support ________ file locking.
A. mandatory B. advisory C. opportunistic D. exclusive
Answer: B
QUESTION 81:
In the Windows environment, the storage appliance supports the use of local groups in managing users and groups.
A. True B. False
Answer: A
QUESTION 82:
A qtree security style of UNIX will______________.
A. Block CIFS access to the file system B. Allow CIFS access to the file system NS0-121
Actualtests.com - The Power of Knowing
C. Block CIFS access unless the user is also a UNIX user D. Not allow write operations to CIFS users
Answer: B
QUESTION 83:
CIFS clients can resolve symbolic links created by NFS clients on the storage appliance.
A. True B. False
Answer: A
QUESTION 84:
Which of the following symbolic links is NOT supported in Data ONTAP?
A. Mapped B. Widelink C. No boundary checking D. Targeted
Answer: D
QUESTION 85:
Which one of the following will enable "symlink_strict_security"?
A. options cifs.symlink_strict_security on B. cifs shares -change <sharename>-symlink_strict_security C. options symlink_strict_security=true D. options symlink_strict_security=on
Answer: B
QUESTION 86:
NTFS allows file access based on ___________.
A. NT ACLs and UNIX permissions B. SID and password C. NT ACLs and SID D. UNIX permissions NS0-121
Actualtests.com - The Power of Knowing
Answer: C
QUESTION 87:
Which one of the following is NOT part of the UNIX security style?
A. GID B. Other C. SID D. UID
Answer: C
QUESTION 88:
To set the default security style for all newly created volumes on the storage appliance to have mixed security, one must execute the following command:
A. options qtree.default_security_style mixed B. options volume.default_security_style mixed C. options wafl.default_security_style mixed D. options default_security_style mixed
Answer: C
QUESTION 89:
A new storage appliance is added to your network. Console access seems fine, and the storage appliance is not reporting any configuration issues. However: * Data access to the storage appliance is very slow (both CIFS and NFS clients). * Users are not complaining about slow response to other storage appliances. * Moving the storage appliance to a different port on the switch doesn't help. * Moving the storage appliance to a different switch doesn't help. * Duplex and link settings are correct. What's the most likely cause of the problem?
A. Bad switch B. Bad network cable C. Configuration issue on client workstation D. Configuration issue on the storage appliance
Answer: B
NS0-121
Actualtests.com - The Power of Knowing
QUESTION 90:
You set up a new qtree on a storage appliance. The CIFS permissions on the qtree are everyone: full control. From your Windows workstation you migrate some files into the qtree. Your Windows users can access the share, copy, edit, and delete files without issue. A root user on a Solaris workstation attempts to mount the qtree through an existing mount and receives the "Access Denied" message. The super user can mount other qtrees on the same volume. What's the most likely cause of this issue?
A. NFS is turned off on the storage appliance. B. The qtree has not been exported. C. The user does not have permission on the qtree. D. The qtree is missing from the /etc/hosts file.
Answer: B
QUESTION 91:
Which one of the following commands is most appropriate for troubleshooting a multiprotocol authentication problem?
A. wcc B. rdfile /etc/rc C. priv set advanced D. sysstat 1
Answer: A
QUESTION 92:
What command is used to display the credentials the storage appliance has stored in memory for a particular user account?
A. cifs B. wcc C. showcred D. mem_disp
Answer: B
QUESTION 93:
Which of the following items is NOT a resource for an NFS export?
NS0-121
Actualtests.com - The Power of Knowing
A. volume B. subnet C. directory D. qtree
Answer: B
QUESTION 94:
Which of the following statements would NOT apply to an entry in the /etc/exports file regarding exporting directories, qtrees, and volumes?
A. The storage appliance must export each volume separately. B. The storage appliance must resolve host names. C. The storage appliance can export ancestors and their descendants. D. The storage appliance can restrict access by specific hosts.
Answer: D
QUESTION 95:
The exportfs command runs on boot and exports the volumes and directories located in the /etc/exports file.
A. True B. False
Answer: A
QUESTION 96:
Which command exports all the export entries listed in the etc/exports file, but ignores the options specified for those entries?
A. exportfs -a B. exportfs -u C. exportfs -v D. exportfs -i
Answer: D
QUESTION 97:
Hard, soft, and threshold quotas are specified on disk blocks only.
A. True NS0-121
Actualtests.com - The Power of Knowing
B. False
Answer: B
QUESTION 98:
A quota target can be defined as _______________.
A. The maximum amount of disk space in a volume B. The maximum number of files in a disk C. A user, group, or qtree to which a quota is applied D. A specific disk space threshold
Answer: C
QUESTION 99:
Which of the following commands allows you to display quota usage?
A. quota on B. quota report C. quota run D. quota setup
Answer: B
QUESTION 100:
What will happen if a soft quota is exceeded?
A. All write operations will fail. B. An autosupport message will be sent. C. An SNMP warning message will be generated. D. A spare disk will be added to the volume.
Answer: C
QUESTION 101:
Which two of the following are Data ONTAP commands for gathering performance information?
A. sio_ntap B. sysstat C. perfstat D. nfsstat NS0-121
Actualtests.com - The Power of Knowing
Answer: BD
QUESTION 102:
Which entry in this /etc/quotas file for a qtree on /vol/wmv will affect the target?
A. The last entry for the qtree B. The first entry for the qtree C. The entry related to the group D. The entry related to the user
Answer: B
QUESTION 103:
In sysstat output, under the column of "CP ty", which of the following values would indicate that the CP was caused by a full NVLog?
A. L B. B C. U D. F
Answer: D
QUESTION 104:
The ____ option in the sysstat command displays a summary of the statistics. Your answer >
Answer: -s
QUESTION 105:
To view per client statistics on the storage appliance, options nfs.per_client_stats.enable must be turned on.
A. True NS0-121
Actualtests.com - The Power of Knowing
B. False
Answer: A
QUESTION 106:
CORRECT TEXT Exhibit:
In this example, _____ percent of the RPC calls are write operations. Your answer >
Answer: 87
QUESTION 107:
Which of the following are methods for analyzing the performance output of an NFS client to the storage appliance? 1) Time the mkfile command for a write test 2) Time the dd command for a read test 3) Time the cp command for a read and write test 4) Verify your results with the nfs -c command
A. 1 and 4 B. 2 and 4 C. 3 and 4 D. All four methods
Answer: D
NS0-121
Actualtests.com - The Power of Knowing
QUESTION 108:
If you are receiving RPC timeouts, the following troubleshooting steps would be appropriate: 1) Verify that the RPC is enabled. 2) Verify that the NFS daemons are running. 3) Verify that the correct mount points have been created.
A. True B. False
Answer: A
QUESTION 109:
When viewing sysstat output, which one of the following fields is NOT part of the total number of operations per second?
A. CIFS B. FTP C. NFS D. HTTP
Answer: B
QUESTION 110:
Which of the following is NOT an appropriate step to take when troubleshooting a "stale nfs file handle" response to a mount request?
A. Check the client's fstab. B. Check for connectivity to the storage appliance from the client. C. Check show mount -e to the storage appliance from the client. D. Check the /etc/exports file on the storage appliance. E. Check the /etc/sd.conf file on the client.
Answer: E
QUESTION 111:
Which two of the following might cause a user to receive a message that there is no space left on a disk?
A. There is not enough space available on the disk. B. The user has exceeded his or her quota. C. Snap reserve is set to 10%. NS0-121
Actualtests.com - The Power of Knowing
D. The disk is write protected.
Answer: AB
QUESTION 112:
Which one of the following commands is used to analyze traffic bottlenecks on the network?
A. netstat B. ifstat C. netdiag D. traceroute
Answer: D
QUESTION 113:
The quota resize command only affects existing /etc/quotas file target entries, not new target entries.
A. True B. False
Answer: A
QUESTION 114:
Which one of the following storage appliance commands best performs network diagnostics?
A. netstat B. diag C. netdiag D. sysstat
Answer: C
QUESTION 115:
Which one of the following commands best displays the statistics for the network interface?
A. netstat B. ifconfig C. sysstat NS0-121
Actualtests.com - The Power of Knowing
D. ifstat
Answer: D
QUESTION 116:
Which one of the following commands would you use to set up the network interface?
A. ifstat B. ping C. ifconfig D. traceroute
Answer: C
QUESTION 117:
If an application has acquired an exclusive lock on a file via NFS version 3, you would be unable to remove that file from another NFS client using the rm command.
A. True B. False
Answer: B
QUESTION 118:
The nfsstat command displays statistics and remote procedure calls for the filer. When bad calls are greater than zero, which of the following describes the best action to take?
A. Adjust rsize of the mount option on the server B. Adjust rsize of the mount option on the client C. Adjust wrize on the server D. None of the above
Answer: B
QUESTION 119:
Given the content of the /etc/quotas file, fill in the blanks by selecting the appropriate answer for the following statement:
NS0-121
Actualtests.com - The Power of Knowing
"Any user not otherwise mentioned in this file can use of disk space and files in the /vol/wmv volume."
A. 50MB of disk space and 15K files B. 750MB of disk space and 85K files C. 100MB of disk space and 75K files D. 75MB of disk space and 75K files
Answer: A
QUESTION 120:
Given the content of the /etc/quotas file, fill in the blanks by selecting the appropriate answer for the following statement:
"Any qtree in the /vol/wmv volume not otherwise mentioned in this file can use ___ of disk space and ___ files."
A. 50MB of disk space and 15K files B. 750MB of disk space and 85K files C. 100MB of disk space and 75K files D. 75MB of disk space and 75K files
Answer: C
QUESTION 121:
Given the content of the /etc/quotas file, fill in the blank by selecting the appropriate answer for the following statement:
NS0-121
Actualtests.com - The Power of Knowing
"The following user name(s) is given an explicit quota of 100 MB of disk space and 75K files in the /vol/wmv/proj1 qtree. This user is also restricted to the default limit of 50 MB of disk space and 15K files."
A. wesson B. All users C. lmoe D. None of the above