Академический Документы
Профессиональный Документы
Культура Документы
03
Construction
Advantages
Technical Data
Colour shade Packaging Shelf-life Resistance
Coating system
Application
Material consumption Specific Gravity olids content Approx. % Theoretical film thickness with a consumption of 100 g/m2 Material consumption with 20% loss for medium dry film thickness Kg/m
2
approx. Kg/ltr.
By Vol.
Sika lcosit Steel 1.3 41 62 77 32 60 0.22 Protect Steel: Surface must be free from oil, grease and dirt as well as mill scale. Blastcleaning to Sa 2.5 as per DIN 55928, part 4. Min. + 5C. Sika lcosit Steel Protect is supplied ready for application; stir thoroughly prior to application. By brush, roller or spray application. Spraying: High pressure equipment, nozzle with a bore of 1.5 - 2.0 mm. If necessary max. 5% Thinner B may be added. Airless-spraying: Spray pressure in gun mm. 150 bar. nozzle with a bore of 0.28-O.38mm, spray angle 75-80. If necessary add max. 5% Thinner B. Thinner B. Thinner S.
1/2
Drying grade 6 as per DIN Dry film Product + 5C + 23C + 40C + 80C thickness 53 150 (stackable) Sika lcosit Steel Protect 60 microns 6 hours 1.5 hours 30 min. 10 min. Waiting time between After reaching drying grade 6, overworkable with itself. applications Final drying Several days, depending on layer thickness and temperature Precautionary measures Lcosit Steel Protect falls under the dangerous goods regulations (class 3.3). Observe safety advice printed on label. During application in closed rooms, pits and shafts etc. sufficient ventilation must be provided. Keep away light including welding. In badly lit rooms only electric safety lamps are permitted. The installed ventilation equipment must be spark-proof. In a liquid state the product as well as the thinner contaminate water and should not get into drains, water and soil. In any case remnants of thinner and material must be removed according to regulations. Further details are contained in our instructions Health protection and prevention of accidents.
Construction
Legal notes
The information, and in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sikas recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Egypt for Construction Chemicals El Abour City 1st industrial zone (A) Section # 10 Block 13035, Egypt
Tel: +202- 6100714/15/16/17/18 Fax:+202- 6100759 Mob: +2012- 3908822/55 www.sika.com.eg Icosit Steel Prodect 2/2