Академический Документы
Профессиональный Документы
Культура Документы
No
Prpd. Chk. Appr. End-User Ref. No.: Project Ref. No.: Design Code Sizing Basis Fluid State at Inlet Relieving Case MAWP MAWV
Date
Revision
Sizing Std.
API2000
Blocked Discharge Gas / Vapor Tank P-Cond. System Conditions 0.25 psig 14.696 psia 60 F 20 F 200 F
Atmospheric Pressure Operating Temperature Min. Design Temperature Max. Design Temperature
Tank Pressure Conditions Fluid Name Methane Molecular Weight, M Compressibility, Z Ratio of Sp. Heats, k (Cp / Cv) Subsonic Flow Factor, Fs Vessel Pressure Flowing Temperature Required Flow Flow Coefficient 16.040 1.000 1.310 0.128 0.25 psig 200 F 2913 SCFM 0.825
Tank Vacuum Conditions Fluid Name Molecular Weight, M Compressibility, Z Ratio of Sp. Heats, k (Cp / Cv) Subsonic Flow Factor, Fs Vessel Vacuum Flowing Temperature Required Flow Flow Coefficient
Page : 1
Pentair Valves & Controls and its parent, subsidiaries, and affiliates assume no liability in any way whatsoever for any direct or indirect loss or damage through the application of this software. See terms of license agreement. Not for resale. All rights reserved. All trademarks, trade names and/or registered trademarks referred to in this program are the property of their respective owners. Copyright 2013 Pentair Valves & Controls.
No
Date
Revision
CALCULATION NOTES
Input Value 16.040 1.310 1.000 2913 SCFM 0.25 psig 14.696 psia 200 F 0.825 0.0004 psig 0 50.027 in
Equation Value 16.040 1.310 1.000 2913 SCFM 0.25 psig 14.696 psia 659.670 R 0.825 0.0004 psig 0 50.027 in 14.946 psia 14.696 psia 0.983 0.128
Calculate Inlet Relieving Pressure, Outlet Pressure, Absolute Pressure Ratio P1 = Ptank + Patm P1 P2 = Patm PR = P2 / P1 Calculate Sub-Critical Flow Factor Fs = {[k / (k - 1)] * [PR^(2 / k) - PR^((k+1)/k)]}^0.5 Calculate Differential Pressure X = P1 - P2 P2 PR Fs
0.250
Calculate Discharge Coefficient Kd If X > Tp, then Kd = Kmax, else Kd = Kmax * {sin[(X / Tp) * ( / 2)]}^E Calculate Volumetric Flow V = 278700 * Kd * A * P1 * Fs / (M * T * Z)^0.5 V 3567.915 SCFM
0.825
3567.915 SCFM
Page : 2
Pentair Valves & Controls and its parent, subsidiaries, and affiliates assume no liability in any way whatsoever for any direct or indirect loss or damage through the application of this software. See terms of license agreement. Not for resale. All rights reserved. All trademarks, trade names and/or registered trademarks referred to in this program are the property of their respective owners. Copyright 2013 Pentair Valves & Controls.
No
Date
Revision
SELECTION SUMMARY
Valve Model No. Brand 700008 Varec
CONNECTIONS
Inlet Outlet 8" Drilling Drilling 150# FF Standard ANSI B16.5
Wt.= A= B= C= D= E= F= G= H=
12 lb 20 in 7.75 in
= = = = = = = = =
Dimension Notes
Accessories not shown. Weight and dimensions shown are approximate. Actual valve may vary from. image.
Tag Notes
Printed On: 28-Oct-2013
Page : 3
Pentair Valves & Controls and its parent, subsidiaries, and affiliates assume no liability in any way whatsoever for any direct or indirect loss or damage through the application of this software. See terms of license agreement. Not for resale. All rights reserved. All trademarks, trade names and/or registered trademarks referred to in this program are the property of their respective owners. Copyright 2013 Pentair Valves & Controls.
Brand:
Varec
Valve Type:
8" 7000
Page : 4
Pentair Valves & Controls and its parent, subsidiaries, and affiliates assume no liability in any way whatsoever for any direct or indirect loss or damage through the application of this software. See terms of license agreement. Not for resale. All rights reserved. All trademarks, trade names and/or registered trademarks referred to in this program are the property of their respective owners. Copyright 2013 Pentair Valves & Controls.
Tag Information
Tag Number: Revision: Prepared By: QuickCalc003 Last Modified: Checked By: 10/28/2013 12:07:17 PM Approved By:
Page : 5
Pentair Valves & Controls and its parent, subsidiaries, and affiliates assume no liability in any way whatsoever for any direct or indirect loss or damage through the application of this software. See terms of license agreement. Not for resale. All rights reserved. All trademarks, trade names and/or registered trademarks referred to in this program are the property of their respective owners. Copyright 2013 Pentair Valves & Controls.