Академический Документы
Профессиональный Документы
Культура Документы
ANTI-SEIZE TECHNOLOGY
I ANTI-SE
ZE
Contents
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
Anti-Seize Compounds Pages 3-6 Thread Sealants Pages 7-9 Threadlockers (Anaerobic) Pages 10-11 Gasketing, Sealing/Caulking & Adhesives Pages 12-14 Plumbing Specialties & Miscellaneous Page 15 Lubricants & Penetrants Pages 16-19 Protectants/Coatings Pages 20-21
Greases Pages 22-23 Cleaners/Degreasers (Aerosol) Pages 24-26 Cleaners/Degreasers (Bulk) Page 27 Application Equipment Page 28 Point-of-Purchase Displays Page 29 Product & Part Number Index Page 29
This new, general purpose thread sealant is engineered and tested to be FGGBM System compatible with FlowGuard Gold, Corzan and Blazemaster pipe and fittings. This heavy duty paste contains no solvents or other ingredients which harm CPVC plastics. Typical applications for this product are recommended for pipes carrying water, steam, LP and natural gas, refrigerants, dliute caustics, acids and temperatures to 500. Special Properties for this are non-hardening, non-dripping, non-toxic, suitable for potable water, no solvents, non-curing connections can be put into service immediately, self-lubricating and positive sealing.
Container Sizes 54008-1/2 pt. Brush Top 54018-1 pt. Brush Top 54025- 1 qt. 54030- 1 Gallon Can
SG-ONE TM
Temperature Ranges Continuous service to 400 F (204 C) Intermittent to 450 F (230 C) Container Sizes Light 24303- 3 oz. Tube 24308- 8 oz. Tube Heavy 24703- 3 oz. Tube 24708- 8 oz. Tube This new, clear, dielectric, silicone grease is available in Light or Heavy Consistensies. It is infused with with PTFE for added lubrication and high temperature properties. This odorless, non-toxic product is both FDA and NSF compliant, with no dropping or melting points. SG-ONE is resistant to moisture, dielectric, and has a long service life. Typical applications for this product include lubricating valves, packings, gaskets, moisture proofing electrical equipment, cables, ignition systems, synthetic O-rings, sealing vacuum and pressure systems.
I ANTI-SE
ZE
Anti-Seize Compounds
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
COP-GRAF
Cop-Graf is a top quality anti-seize compound composed of pure copper and graphite in a high heat resistant carrier. It is designed to lubricate and protect threaded connections and flanges at temperatures to 1800F(982C) and extreme load pressure conditions. Cop-Graf has water resistant and anti-oxidant properties that resist seizing and galling, while protecting against rust and corrosion. Cop-Graf does not separate. It is non-dripping, non-hardening, permits quick, easy disassembly and removal of connection even after lengthy service or severe conditions. Stress, strain and time to disassemble are greatly diminished. Exceeds MIL-A-907 specifications.
ANTI-SEIZE SPECIAL
Retards Galvanic Action Between Dissimilar Metals Resists Salt Water Corrosion Compatible With All Types of Metals/Most Plastics Non-Hardening and Non-Dripping
NICKEL-GRAF
Nickel-Graf is a premium quality anti-seize lubricant designed especially for maximum resistance to the most corrosive and extreme temperature environments. Performs to temperatures of 2600F (1426C). Nickel-Graf is composed of pure colloidal nickel and graphite flakes dispensed in a superior high performance petroleum carrier. It does not contain any copper, lead or molybdenum disulfide. Nickel-Graf will not poison catalyst beds, reaction chambers or special alloy fittings. Can be used with anhydrous ammonia, acetylene and other vinyl monomers. Exceeds MIL-A-907 specifications. Features and Benefits: Offers Maximum Protection From Acids, Caustics, Chemicals and Extreme Heat Eliminates Galling and Cold Welding Protects Against Corrosion and Oxidation Reduces Friction and Lowers Torque Speeds Assembly & Disassembly Provides a Nickel Plating as a Barrier Between Metal Surfaces
IZE ANTI-SE
ANTI-SEIZE COMPOUNDS
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LO TECHNO
GY
MOLY-LIT
Moly-Lit is an extra heavy duty, extreme pressure and low friction lubricant. Its high concentration of molybdenum disulfide, graphite, and other anti-wear solids in a high performance carrier that will protect valuable parts and equipment to temperatures up to 2400F (1315C). Exceeds MIL-A-907 specifications. Moly-Lit anti-seize compound insures minimum torque requirements and lubricates under extreme heavy loads. Recommended for threads, pipes, valves and equipment carrying ethylene and acetylene and other services where copper contamination must be avoided. Features and Benefits: No Copper or Aluminum Long Term Protection orrosion Reduces Friction on all Metal Surfaces Protects Load Bearing Surfaces During Critical Wear-In
Available in: P/N: 2oz BT 12002 3oz tube 12003 11oz BT 12012 15oz cart 12015 23oz can 12016 23oz BT 12018 2 1/2# can 10# can 12032 12035
METAL-FREE 2000
ENVIRONMENTALLY SAFE
Metal-Free 2000 is a non-metallic, lead free, heavy duty anti-seize lubricating compound. A blend of extreme pressure additives, water resistant properties and rust and corrosion inhibitors in a high performance carrier to provide protection to 2400F (1315C). Metal-Free 2000 is used in any industry where corrosion, extreme heat and pressure are major factors. Features and Benefits: Environmentally safe Withstands extreme pressure conditions Has no hazardous ingredient per OSHA 29, CFR 1910.1200 Lowers friction and reduces torque Compatible with stainless steel and nickel alloys
Available in: P/N: 5oz BT 20005 8oz BT 20010 15oz cart 20015 20015 1# BT 20018 20018 2# can 20025 8# can 20030 42# pail 20050 130# and 425# drums available. Call for details.
ZINC ANTI-SEIZE
Zinc Anti-Seize is a smooth mixture of zinc dust and petrolatum blended compound to prevent seizing and corrosion within metal joint assemblies. It is particularly recommended for aluminum and aluminum alloys. It protects connections from corrosion through the electrochemical "GALVANIZING" properties of the zinc dust on both aluminum and ferrous metal (iron) components. Features and Benefits: Conforms to MIL-T-22361 Excellent corrosion protection up to 750F (399C) Resists seizing in aluminum, aluminum alloys and iron assemblies Applications: Aluminum, other soft metal bolts, and in ferrous metal assemblies.
Available in: P/N: 2 oz BT 45002 8 oz BT 45008 1 # can 45016 1#BT 45018
MOLY-AP
MOLY-AP Extreme pressure lubricant for metal assembly and maintenance. Reduces wear on parts during breaking-in and new parts assembly.
MARINE FORMULA
Specific Applications: Lubricating threaded connections, gears, chains, conveyor tracks; lubricating during metal forming, general parts assembly, press-fitting, cold extrusion, break-in of bearings, movable screws, splines, cams, and ways. Special Properties: Low coefficient of friction. Temperature Range: Solids are effective from 0 to 750F (18 to 399C); base oil vehicle 0 to 250F (18 to 121C).
44
IZE ANTI-SE
ANTI-SEIZE COMPOUNDS
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
ALUMINUM PLATE
Anti-Seize Compound
Aluminum Plate contains no lead or copper and has a synthetic, non-melting carrier. This high quality lubricant depolymerizes and dissipates at temperatures above 400 F without leaving a carbon residue, depositing a dry film of aluminum and graphite to plate and protect metal surfaces to temperatures of 2000 F (1095 C). Features and Benefits: Withstands Extreme Weather Conditions Does Not Form Abrasive Residue at High Temperatures Highly Water Resistant Resists Seizing & Galling Reduces Friction Protects Against Rust & Corrosion Applications: All Threaded Metal Assemblies where an Anti-Seize 2ozbt 6ozpres* 8ozbt 15ozcart 1#bt 2#can 8#can 42#.pail Protection is Desired. Use on Bolts, Fittings, Flanges, Gaskets, Keyways, Nuts, Plugs, 32002 32006 32010 32015 32018 32025 32030 32050 Studs, Unions, Valves, etc. Ideal for Ovens, Heat Trolleys, Kilns, Stokers or any Parts *6 oz.pressurized can (w/applicator).130# and 425# drums available. Moving in High Temperatures.
COPPER PLATE
Anti-Seize Compound
Copper Plate contains no lead, graphite or aluminum and has a synthetic, non-melting carrier. This formula has a high concentration of pure copper flakes aided by special carriers and inhibitors which protect, lubricate and fight corrosion, at the same time enhancing electrical conductivity. Features and Benefits: Withstands Extreme Weather Conditions "Copper Plates" mating Surfaces Resists Seizing and Galling Enhances & Protects Most Electrical Connections Highly Water Resistant Withstands Temperatures to 1800 F (982 C) Recommended For Stainless Steel Applications Above 550 F (288 C) Applications: Nuts, Bolts, Studs, Screws, Slides, Lugs, Grounding Clamps and Connections, Battery Lugs and Cables, Keys and Keyways, Pins, Compression 2ozbt 6ozpres* 8ozbt 15ozcart 1#bt 2#can Connectors, Lamp Sockets and Receptacles on Boats, Autos and Trucks, Piping 21002 21006 21010 21015 21018 21025 Couplings, Press Fits, Steam Injection Fittings, Gaskets, Flanges and more.
NICKEL PLATE
Nickel Plate is a premium anti-seize lubricant for maximum resistance to the most corrosive and extreme temperature environments. It has a non-melting synthetic carrier which dissipates without leaving a carbon residue, depositing a dry film of nickel and graphite to plate and protect surfaces to temperatures of 2600F (1426C). Features and Benefits: Withstands Extreme Weather Conditions Does not form a carbon residue at high Temperatures Highly Water Resistant Resists Seizing and Galling Protects Against Rust and Corrosion Resists Galvanic Pitting on All Kinds of Machinery and Metal Fittings Excellent for use on Dissimilar Metals Such as Steel-to-Aluminum, Steel-toMagnesium, Stainless Steel-to-Stainless Steel, Steel-to-Brass, etc. Applications: Any Metal Connection where an Anti-Seize is Desired; Parts Moving in High Temperatures; Bolts, Fittings, Flanges, Gaskets, Keyways, Valves, etc.
2oz bt 5oz bt 6oz pres* 8oz bt 15oz cart 1# bt 2# can 8# can 35002 35005 35006 35010 35015 35018 35025 35030 *6 oz.pressurized can (w/applicator). 130# and 425# drums available. 42# pail 35050
MOLY PLATE
Anti-Seize Compound
Moly Plate is a metal free compound composed of molybdenum disulfide and graphite with a synthetic non-melting carrier. "Moly" with its very low coefficient of friction makes this product an excellent choice for high loads and parts under conditions of extreme pressure and temperatures up to 2400F (1315C). Features and benefits: Withstands Extreme Weather Conditions Does not form a carbon abrasive after high temperature exposure Highly Water resistant Resists seizing and galling Protects against rust and corrosion Applications: Metal connections where reactive metals such as copper and aluminum must be avoided. Rough cut threads made of iron, steel, and most alloys. Stainless steel, aluminum, and alloys that tend to gall easily.
2oz BT 8ozBT 15ozcart 1#BT 2#can 37002 37010 37015 37018 37025 130# and 425# drums available.
I ANTI-SE
ZE
ANTISEIZE COMPOUNDS
GY
LO TECHNO
www.antiseize.com www.antiseize.com
2345 N. 17TH AVE. ANTI-SEIZE Franklin Park, IL 60131 FAX: (847) FAX: 455-2371 (847) 455-2371 2345 N. 17TH AVE. PHONE: (847) 455-2300 Franklin Park, ILPHONE: 60131 (877) ADDRESS:
PURE WHITE
Availablein: 3oztube 8oz bt 14ozcart 1#bt 2#can P/N: 31003 31008 31015 31018 31025 31030
Hi-Temp Food Grade is a HEAVY DUTY assembly paste designed for high temperature applications in the Food/Beverage and Drug/Cosmetic industries. Hi-Temp Food Grade is formulated to meet FDA and USDA requirements where incidental contact with food can occur. It adheres to metal surfaces and has anti-rust and anticorrosion properties that are vital to protect equipment from harmful attack of corrosive acids found in food substances. Features and Benefits: Effective at temperatures to 2100F (1148C) Pure, Tasteless, Non-Toxic & Non-Staining FDA Reg. 21CFR 178.3570
Available in: 4oz tube 16oz cart 1# BT 2 1/2# can 10# can 42# pail 200# drum P/N: 41003 41015 41018 41025 41030 41050 41130
May be used with Potable Water High Solid Content for Long Life Excellent Resistance to Wash Out
Applications: All metal-to-metal surfaces where disassembly is a requirement after exposure to high temperatures, corrosive conditions, or harsh environments.
POLY-TEMP COPPER Tape, for cleaner high-temperature threaded anti-seize applications. Reduces required torque. Applied easily, seals tightly, overcomes high temperature seizing. Protects against corrosion, rusting and galvanic pitting. Temps. -450 to +1800F (-268 to +982C). POLY-TEMP NICKEL Tape, for applications where copper cannot be used, including chemical, extremely high temperature, and harsher environments. Made especially for stainless steel threads. Temps. -450 to 2600F (-268 to +1426C). POLY-TEMP CERAMIC Tape (Food Grade), formulated specially for anti-seize applications typical to food industry. All materials FDA approved. Temps.-450 to +2100F (-268 to +1148C).
Features & Benefits: Easy to apply from handy plastic spool Will not squeeze out and rub off like grease based products Discourages Seizing and Galling and Carbon Fusing Poly-Temp Anti-Seize Tapes are unique lubricating products that Compatible with a wide range of chemicals Non-flammable assist in assembly and disassembly of threaded fasteners and connections. These tapes provide the means to apply and control a pre- Non-staining Inhibits Corrosion, Rusting and Galvanic pitting Meets Mill Specs.T-2773OA (ASG) and A-A-58092 cise amount of lubrication while maintaining a clean, non-greasy Excellent pipe thread sealant up to 550F (287C) assembly. Poly-Temp Anti-Seize Tapes are made with Copper, Nickel, or Ceramic flakes blended with PTFE resins . PTFE , an excellent lubricant, and the additive flakes help prevent seizing and galling during assembly and disassembly of threaded components. This combination of ingredients provides protection from corrosive substances and environmental conditions.
Available In: 1/2x600 (10/case) Poly-Temp Copper P/N: 36136 Poly-Temp Nickel P/N: 36336 Poly-Temp Ceramic P/N: 36536 3/4x600 (6/case) 36151 36351 36551
IZE ANTI-SE
THREAD SEALANTS
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
SOF-SET
Sof-Set is a semi-smooth, easily applied, brushable thread sealing compound. Formulated with special ingredients to provide superior sealing to a variety of liquids and gases. Sof-Set is non-petroleum based with a high solids content which will firm up after application further promoting a quality seal. Features and Benefits: Dries To A Soft Set Corrosion Inhibiting Non-Seizing Allows Disassembly Non-Metallic Solids Non-Dripping Can Be Applied To Newly Cut Hot Threads Sof-Set can be used on all metal and PVC threaded pipe connections found in industrial, commercial and residential systems. Withstands temperatures to 400F (204C) and pressures to 10,000 psi (liquid), 2600 psi (gas). Applications: Threaded Connections for Water, Steam, LP and Natural Gas, Refrigerants, Fuel Oils, Hydraulic Oil, Diluted Acids and Caustics. For additional uses see product bulletin No. 2900.
Available In: 2oz BT 1/2pt BT 1 pt BT 1 qt can 1 qt BT 1 gal can 5 gal pail 55 gal drum P/N: 29002
29010
29018
29025
29026
29030
29050
29055
TFE
TFE is a superior grade, non-hardening, easy to apply, heavy duty pipe thread sealant. It is formulated to a thick paste consistency, fortified with an extra amount of PTFE and PTFE materials to insure a positive seal with less effort. TFE is designed for all pipe fitters, fabricators, plumbers and mechanical contractors. Because of its unique solids content, TFE fills thread imperfections and provides leak-proof joints that seal for the life of the connection. Features and Benefits: Heavy-Duty Sealant Contains No Solvents Non-Staining Non-Corrosive Non-Hardening Self-Lubricating Non-Toxic UL Classified and NSF Registered UL Classified for fire protection sprinkler systems Food Grade- FDA Registered 21 CFR 175.300 Non-Drippingcan be Applied to Newly Cut Hot Threads Prevents Corrosion, Seizing and Galling TFE is Recommended For Pipe Threads Carrying Potable Water, Steam, LP and Natural Gas, Refrigerants, Solvents, Caustics, Dilute Acids, Oils and Diesel Fuel. Withstands Temperatures to 500F (260C) and Pressures to 10,000 psi (Liquid), 2,000 psi (gas). Applications: All Pipe and Threaded ConnectionsCast Iron, Malleable, Brass, Copper, Stainless Steel.
Available In: 2oz BT 3oz tube 1/4pt BT 6oz tube 1/2pt BT 1 pt BT 1 qt can 1 qt BT 1 gal can 5 gal pail 55 gal drum P/N: 14002 14003 14005 14008 14012 14018 14025 14026 14030 14050 14055
* See page 29 for POP display details
AST-PPD
AST-PPD is a smooth, grit-free, gray colored pipe joint compound. It seals threaded joints tight and will not crack or crumble. Disassembly months or years later is easy. Contains no lead and is safe for all water systems. Temperature Range Use - Gases & Liquid: -15F to +400F (-26 to +204C). Pressure Range Use - Gases: up to 1000 psi; Liquids up to 2000 psi Brushable to -15F (-26C) Sets - Soft set, non-hardening Contains - Non-toxic inert oils and carbonate. Contains no lead or silicone.
Available in: 1/2 pt BT P/N: 25108 1 pt BT 25118 1 qt can 25125 1 qt BT 25126 1 gal can 25130 5 gal pail 25150
I ANTI-SE
ZE
THREAD SEALANTS
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
10 ml bottle 50 ml bottle 250 ml bottle 22541 22542 22543 22544 22545 22546
SMOOTH
TH
IZE ANTI-SE
www.antiseize.com
LOGY TECHNO
Tape Densities POLY-TEMP XHD, FULL DENSITY POLY-TEMP HD, HEAVY DUTY POLY-TEMP, MEDIUM DENSITY POLY-TEMP, LOW DENSITY
POLY-TEMP XHD eXtra Heavy Duty Tapes are Full Density Tapes which deposit more PTFE per wrap of tape and are tougher, stronger, and more durable than other grades. All XHD Tapes meet A-A-58092 for oxygen service.
SIZE POLY-TEMP 1/4x520 Our Most Popular Thread Seal Tape 1/2x260 * Poly-Temp Thread Seal Tape is made from 100% pure PTFE Resins. Its medium density allows 1/2x520 * this tape to be used as a general purpose thread seal tape in most applications. It can be used 1/2x1296 on all types of pipes and most services. More economical than most paste type Thread Sealing 3/4x260 Compounds. Never dries out, no mess, no dripping and easy to apply. 3/4x520 * * See page 29 1x260 for POP 1x520 display details
The same characteristics and advantages of the standard POLY-TEMP PTFE Tape material but thicker and higher in specific gravity (High Density).
U LC
LISTED PIPE JOINT TAPE
POLY-TEMP HD 1/4x520 46125 1/2x520 46135 3/4x520 46150 POLY-TEMP XHD 1/2x260 46230 1/2x520 46235 3/4x520 46250 POLY-TEMP XHD ST. STEEL GRADE 1/2x260 46231 12 count POP Display 46231A
Tape, extra thick and extra density material, Our highest grade of PTFE T eflon meets the Govt. Spec C.I.D. A-A--58092.UL and ULC Recognized Component.
POLY-TEMP XHD Stainless Steel Grade with its nickel content is designed to perform as sealant and as an antiseize for difficult service conditions associated with stainless steel and SS alloys. The full density of the tape ensures maximum sealing and durability of the connection. Stronger, tougher, more durable than other grades.
POLY-TEMP STAINLESS STEEL GRADE XHD Stainless Steel Grade PTFE Tape
U LC
LISTED PIPE JOINT TAPE
Same material as the POLY-TEMP XHD, with the additional approval from the CSA (Canadian Standards Association) for gas lines (CSA #4-90). UL and ULC Recognized Component.
U LC
POLY-TEMP GAS 1/2x260 * 46330 1/2x520 * 46335 3/4x260 46345 3/4x520 * 46350 46340 1/2 x 1296 POLY-TEMP PNK 1/2x260 46430 12 count POP Display 46430A
A Full Density PTFE Thread Seal Tape especially designed for professional plumbers. The pink color distinguishes itself from lower grades of PTFE tapes. Suitable for demanding industrial and commercial plumbing applications. Great for galvanized pipe, copper, brass, chrome or other plated pipe. Strong, and durable with positive sealing for tough * See page 29 applications.
for POP display details
A more economically suited tape for some markets. Still made with virgin PTFE (Polytetrafluoroethylene), a thread sealant for all services . Not as dense as our other tapes but still provides a reliable seal for many applications. Chemically inert, non-hardening , remains flexible, this tapes withstands temperature range between -400F to +500F (-240C to +260C ). Compatible with all pipe materials without exception, and forms a permanent seal for the life of the connection. Meets M il-T-27730A. This tape is ideally suited for plastic pipes.
POLY-TEMP is a registered trademark of ANTI-SEIZE TECHNOLOGY
LOW DENSITY TAPES 1/2x260 26130 1/2x520 26135 1/2x1296 26140 3/4x260 26145 3/4x520 26150 1x260 26155 1x520 26160
AST-LOCK A N A E R O B I C T H R E A D LO C K E R S
connections in the absence of oxygen at ambient temperatures. Available in a full range of strengths & viscosities, these anaerobics fill all surface imperfections and set to a tough, durable seal across the entire surface distributing the stress load, reducing fastener fatigue. Vibration loosening is prevented, and the connection is sealed and protected against corrosion.
42MS
AST-LOCK AST-SEAL
Anaerobic Threadlockers, Retaining Compounds, and Anaerobic Sealants provide a solution for every practical industrial application. 62HS 71HS 72HT 77HS
THREADLOCKERS
AST-LOCK 22LS AST-LOCK 42MS Medium Strength Removable AST-LOCK 62HS High Strength Nut/Bolt Locking AST-LOCK 71HS High Strength Bolt/Stud Locking AST-LOCK 72HT High Temperature Bolt/Stud Locking AST-LOCK 77HS High Str. Heavy Duty Bolt/Stud Locking AST-LOCK 90PW Penetrating/Wicking Medium/High Str.
Low Strength(Str) Threadlocking 39221 39222 39223 39421 39422 39423 39621 39622 39623 39711 39712 39713 39721 39722 39723 39771 39772 39773 39901 39902 39903 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL
Secure bolts & studs. Retain bearings and housings; reduce maintainence for pneumatic/hydraulic equipment. Seal porosity in welds. Seal standard & stainless steel pipe for the life of the connection. Use right out of the bottle.
Packaged in three popular sizes to suit your particular job or application. HYD/PH 91WS 09RC 20RC 35RC
RETAINING COMPOUNDS
AST-LOCK 09RC AST-LOCK 20RC High Temperature High Viscosity AST-LOCK 35RC High Strength High Viscosity
General Purpose Low Viscosity 39091 39092 39093 39201 39202 39203 39351 39352 39353 10mL 50mL 250mL 10mL 50mL 250mL 10mL 50mL 250mL
ANAEROBIC SEALANTS
39911 10mL 39912 50mL Low Viscosity Wicking Type Weld Sealant 39913 250mL
AST-SEAL 91WS
22541 22542 22543 22544 22545 22546 22050 22250 22300 22151 22152 22153
10mL 50mL 250mL 10mL 50mL 250mL 50mL 250mL 750mL 50mL 250mL 750mL
STD/HD
ANAEROBIC COMPOUNDS: FOR USE WITH MOST AST-LOCK / AST-SEAL AST-LOCK PRIMER T ACETONE BASED FAST ACTING VISCOSITY: 3 CPS FLASH POINT: 0F AST-LOCK PRIMER N HEPTANE BASED GENERAL PURPOSE VISCOSITY: 3 CPS FLASH POINT: 30F
10
ANTI-SEIZE TECHNOLOGY
DESCRIPTION
Best suited for metal fasteners under 3/4 when a low strength threadlocker is required for easy disassembly. Designed for setscrews, machine screws, calibration screws, adjustment screws, and thermostat screws. Excellent general-purpose for nuts bolts and screws up to 3/4". Prevents fasteners from vibrating loose yet removable with hand tools. Applications include drive shaft fasteners, hydraulic bolts, and gearbox bolts. Designed primarily for use on Grades 5 and 8, it is very strong for permanent fasteners up to 3/4". It resists harsh environments and impact; and is intended to seal fasteners with poor tolerances. This high strength anaerobic is the best threadlocker for resisting extreme shocks, vibration, and/or environmental conditions. Use on vibrating machine fasteners, valve seats, and transmission studs up to 1". Our highest temperature-rated threadlocker is also one of the strongest. It is designed for some of the toughest applications that also require higher than usual temperature limitations. Best suited for fastener applications with diameters greater than 1". This threadlocker has the best gap filling capabilities with excellent strength and non-migrating characteristics. Intended to penetrate and seal pre-assembled fasteners by capillary action. Use to secure setscrews and other assemblies after final adjustments are completed.
THREADLOCKERS THREADLOCKERS
R RETAINING CCOMPOUNDS
Designed for augmenting the strength of press-fitted assemblies and can be used on slip-fitted parts with a diametrical clearance of up to .005 . Should be used on new and replacement parts. Specifically engineered to meet close tolerance and high temperature requirements. Maximum gap-filling ability makes this retaining compound the perfect choice for loosely fitted parts. Use a primer on gaps over .005 . This retaining compound is best suited for applications when readjustments or repositioning of parts during assembly are necessary.
11
GASKETING/SEALANTS/ADHESIVES
www.antiseize.com
LO TECHNO GY
2345 2345 N. N. 17TH 17TH AVE. AVE. Franklin Franklin Park, Park, IL IL 60131 60131
POLY-TEMP JOINT
PTFE-UHF Joint Sealant
POLY-TEMP JOINT is a 100% expanded PTFE/UHF gasket material. It comes in a soft, pliable ribbon with a self-adhesive tape applied to one side. It is a tough, flexible and economical universal gasket that replaces cut gaskets in a variety of regular and severe service applications. POLY-TEMP JOINT will not deteriorate with age. It is unaffected by common chemicals, will withstand pressures up to 3,000 psi and temperatures -450 to +600F (-268C to +316C). This unique material is highly compressible and will fill severe irregularities in sealing surfaces. Features and Benefits: Self-AdhesiveEasy To Work With Flanges Part Easily No Re-Torquing Required Will Not Deteriorate With Age Resists Cold Flow and Creep Meets FDA Requirements Reduces Inventory of Cut Gaskets UL and ULC Recognized Component Applications: Flanges, Pump & Compressor Housings, Heat Exchangers, Manway Covers, on Rough or Irregular Surfaces, FRP
Vessels, Steam Vessel Flanges, Concrete Lids, Glass Joints, Food Service & Processes POLY-TEMP JOINT is spooled in a range of sizes from 1 to 25mm in diameter (3/64" to 1"). Cut material with scissors and apply to sealing surface. Self-adhesive strip will hold firmly in place.
*Jumbo spools available.
Available in spools of: 1mm x 100 1/8" x 100 3/l6" x 75 1/4 x 50 3/8" x 25 1/2" x 15 5/8" x 15 3/4" x 15 1" x 15 P/N: 28001 28003 28005 28007 28010 28014 28017 28020 28025
POLY-TEMP GASKET
PTFE Gasket Tape
POLY-TEMP GASKET is made of pure virgin expanded polytetrafluoroethylene. The soft and conforming characteristics allow it to seal smooth surface irregularities found on flanges and equipment requiring a thin gasket profile. POLY-TEMP GASKET seals through a wide temperature range from -450 F to +600 F (-268C to +316C). Seals internal pressures of up to 3,000 psi. Features and Benefits: Made of 100% Virgin PTFE Resistant To All Common Chemicals Will Not Contaminate Flow Material Pressure Sensitive Backing to Hold in Place Resists Cold Flow and Creep Will Not Deteriorate With Age Easy to Die-Cut Special Gaskets Meets FDA Requirements UL and ULC Recognized Component Applications: Laminate Over Metal Gaskets To Improve Seal, Sheet Stock For Die-Cutting, Emergency Maintenance Repairs to Damaged Gaskets, Sight Glasses and Manhole Covers, Chemical Plants, Oil Refineries, Paper Mills, and Food Services.
Available in: 50 spools w/adhesive backing: 1x .01 1x .02 1x .04 1x .065 1.5x .01 38101 38102 38103 38104 38151 1.5x .065 38154 2x .01 38201 2x .02 38202 2x .04 38203 2x .065 38204 1.5x .02 38152 1.5x .04 38153
POLY-TEMP VSP
PTFE Valve Stem Packing
POLY-TEMP VSP is 100% TFE fluorocarbon that will withstand vibration, severe corrosion, high temperature and pressure conditions for the life of the valve. Its pliability allows the TFE to conform to worn valve stems and stuffing boxes. POLY-TEMP VSP works where other packings fail. Withstands temperatures of -400 to +500F (-240 to +260C) and pressures to 500 psi for general conditions. Features and Benefits: Easier and Faster to Install Virtually Inert to All Chemicals Low Coefficient of Friction Long Service LifeNever Hardens Compensates for Waviness and Scratches Gland Pressure Compresses TFE into a Custom Molded Packing Ring Meets FDA Requirements Reduces Packing InventoryOne Size Will Fit Wide Range of Applications Will Not Contaminate Product Flow Applications: All Valve Stems, as a Packing on some Small, Low Speed and Low Pressure Pumps, for all Services including Process Lines in Food and Beverage Plants, in Chemical Operations, Petroleum Refineries, and Food Services.
Available in: 3/32x 20 3/32x 50 5/32x 10 5/32x 25 7/32x 7 7/32x 15 9/32x 9 19093 19094 19155 19156 19217 19218 19281
*8x .04
12
IZE ANTI-SE
GASKETING/SEALANTS/ADHESIVES
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
AST-RTV Silicone is great for making replacements of custom gaskets and seals for all types of motors, transmissions, gear housings, pumps, power tools, machinery, etc. It's better than conventional gaskets because it fills in surface irregularities. As a Sealer and CaulkUse it to seal heating and ventilating ducts. RTV Silicone seals cracks or gaps around windows, vents, doors, machinery, truck cabs and trailers, fixtures, lights, walls, bathtubs, sinks, etc. It can be used to waterproof electrical connections and boxes. It will seal out water from compartments in machinery, as well as seal holes where wire tubing or refrigeration lines run through walls. As a Flexible AdhesiveVersatile RTV Silicone will easily bond dissimilar materials. Provides excellent adhesion to clean metal, glass, most types of wood, ceramic, porcelain, painted and many plastic surfaces. Attach name plates and signs to equipment, walls, doors, windows, (interior or exterior). It will bond gaskets in heating and refrigeration units. As a Specialty SealantRTV Silicone can be used to seal or coat components exposed to moisture, vibration, shock, certain fuels, oils, solvents, chemicals and corrosives for a long period of time. This product can be used as a formed-in-place gasket where irregular shapes and harsh conditions reject ordinary seals. It is also effective for repairing electrical insulation, sealing insulators and entrance ports to transformers.
INSTANT GASKET
13
IZE ANTI-SE
SEALANTS/GASKETS
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LO TECHNO
GY
CA-020 (Regular Viscosity) Instant Adhesive is an ethyl cyanoacrylate adhesive. CA-020 is a general purpose, fast curing product with good elasticity for bonding plastics, metal, rubber, glass, and dissimilar materials. CA-120 (Medium Viscosity) Instant Adhesive is slightly thicker for those applications requiring less run off. Better for metal and ceramics. CA-220 (Non-run Gel) Instant Adhesive for overhead or vertical areas where the adhesive must stay put during pre-assembly. Best for porous surfaces. Features and Benefits: Most Versatile Instant Adhesive Available Three Viscosities to accommodate all requirements Temperatures: -40 to +180F (-40 to + 82C), Intermittent +250F (+121C) Fast Overall Cure Speed Convenient Dispenser Bottle With Screw Cap
CA-020 Available In: 1oz (28g) bottle P/N: 23020 CA-120 1oz (28g) bottle 23120 CA-220 20g tube 23220
Applications: Electronic Equipment Including PC Boards, Connectors and Transformers. Plastic Cases, Rubber Fabrication and Gaskets, Appliances and Office Equipment.
Available in: General Purpose w/Steel w/Copper 4 oz. tube/sticks P/N: 34114 34224 34334
Ready-Stick Epoxy Putties are indivdually packaged in a resealable plastic tube.Available in P.O.P.display. See p.29.
ADHESIVE SPRAY
Adhesive Spray is a multi-purpose, pressure-sensitive adhesive designed to form either permanent or temporary bonds between two porous or non-porous materials. Adhesive Spray is specially designed for many industrial applications as well as contractor, office, home and hobby use. Adhesive solids are non-toxic, non-irritating and meet requirements for indirect food additives as outlined in Fed. Reg. paragraphs 121.2507 to 121.2577. Features and Benefits: Colorless Non-Clogging Non-Toxic Solids Temperatures to +110F Low Soak-In Waterproof Fast Aggressive Tack Action CFC Free Applications: Permanent or Temporary Bonds on Paper, Cardboard, all types of Gaskets, Cloth, Foil, Mylar or Acetate Sheet, Glass, many Plastics, Urethane Foam, Leather and Foam Rubber. Temporary bond eliminates need for tacks or pins, making any surface a bulletin board. Printing Plants, Advertising Agencies, Trucking Companies and Shipping Departments, or any industry for sealing packages and applying labels. Available in: 12 oz. aerosol, (P/N 17066)
14
IZE ANTI-SE
Plumbing Specialties
www.antiseize.com
2345 N. 17TH AVE. Franklin Park, IL 60131 PHONE: (877) ANTI-SEIZE FAX: (847) 455-2371
LOGY TECHNO
AST-XPAND
AST-Xpand is high quality expanding urethane foam. It is ideal for permanent sealing of holes; spotinsulating; and sealing out air, dust and moisture. Formulated for easy use, the foam expands to three times its original volume, bonds to wood, metal, masonry, glass and most plastics. Adequately fills voids and provides a tight seal. Features and Benefits: for insulation, noise reduction, and even blocking out pests. AST-XPAND applies quickly to most surfaces, and is ideal for hard-to-reach places, saving both time and labor. It dries tack-free in 15 minutes and sets in about 8 hours. The cure product can be trimmed, sanded and painted. UL Classified as a Caulking and Sealant. One 12 oz. can = 20 tubes of caulk (2.5 gallons) Applications: Insulating and sealing around ducts, pipes, plumbing fixtures, HVAC units, vents, windows & doors, outdoor frames, electrical outlets, foundations and other problem areas. Available in: convenient 12 oz. aerosol can with applicator tube (P/N: 17251).
AST-PUT
AST-PUT Plumbers Putty is stainless, long lasting, and easy to use. It will not harden, crack, or shrinkeven if the can is left open. For setting bowls, faucets, rims, strainers, and other similar sealing and caulking jobs. Smooth and uniform consistency. Will not stick to Not for marble installations. fingers MEETS FEDERAL SPECIFICATION TT-P-1536A.
Available in: P/N: 14 oz tub 25201 3 lb tub 25203 5 lb tub 25205
LUBE-CUT
Lube-Cut Premium grade heavy-duty cutting oils formulated for both hand threading and high-speed machine threading. Carefully blended with sulfur and the purest of additives insuring the greatest protection for your dies and pipe threads. Features and Benefits: Non-Chlorinated, Environmentally Safe Excellent Wetting Characteristics Formulated with Antioxidants and Rust Inhibitors Reduces Friction & Wear Extends Die Life
aerosol DARK P/N: N/A aerosol LIGHT: P/N: 17051 1 pint squirt 51016 1 pint squirt 51216 1 qt w/ trigger sprayer 51032 1 qt w/ trigger sprayer 51232 1 gal 51001 1 gal 51021 5 gal 51005 5 gal 51025 55 gallon 51055 55 gallon 51255
15