Вы находитесь на странице: 1из 18

Standard

ISA-75.08.05-2002 (R2007)
Formerly ANSI/ISA-75.15-1993

Face-to-Face Dimensions for Buttweld-End GlobeStyle Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)

Approved

ISA-75.08.05-2002 (R2007) Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ISBN: Copyright 2007 by ISA. All rights reserved. Not for resale. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic mechanical, photocopying, recording, or otherwise), without the prior written permission of the Publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709

-3-

ISA-75.08.05-2002 (R2007)

Preface
This preface, as well as all footnotes and annexes, is included for information purposes and is not part of ISA-75.08.05-2002 (R2007). The standards referenced within this document may contain provisions which, through reference in this text, constitute requirements of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated within this document. Members of IEC and ISO maintain registers of currently valid International Standards. ANSI maintains registers of currently valid U.S. National Standards. This document has been prepared as part of the service of ISA toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms and asks that they be addressed to the Secretary, Standards and Practices Board; ISA; 67 Alexander Drive; P. O. Box 12277; Research Triangle Park, NC 27709; Telephone (919) 549-8411; Fax (919) 549-8288; E-mail: standards@isa.org. The ISA Standards and Practices Department is aware of the growing need for attention to the metric system of units in general, and the International System of Units (SI) in particular, in the preparation of instrumentation standards. The Department is further aware of the benefits to USA users of ISA standards of incorporating suitable references to the SI (and the metric system) in their business and professional dealings with other countries. Toward this end, this Department will endeavor to introduce SI-acceptable metric units in all new and revised standards, recommended practices, and technical reports to the greatest extent possible. Standard for Use of the International System of Units (SI): The Modern Metric System, published by the American Society for Testing & Materials as IEEE/ASTM SI 1097, and future revisions, will be the reference guide for definitions, symbols, abbreviations, and conversion factors. It is the policy of ISA to encourage and welcome the participation of all concerned individuals and interests in the development of ISA standards, recommended practices, and technical reports. Participation in the ISA standards-making process by an individual in no way constitutes endorsement by the employer of that individual, of ISA, or of any of the standards, recommended practices, and technical reports that ISA develops. CAUTION ISA ADHERES TO THE POLICY OF THE AMERICAN NATIONAL STANDARDS INSTITUTE WITH REGARD TO PATENTS. IF ISA IS INFORMED OF AN EXISTING PATENT THAT IS REQUIRED FOR USE OF THE STANDARD, IT WILL REQUIRE THE OWNER OF THE PATENT TO EITHER GRANT A ROYALTY-FREE LICENSE FOR USE OF THE PATENT BY USERS COMPLYING WITH THE STANDARD OR A LICENSE ON REASONABLE TERMS AND CONDITIONS THAT ARE FREE FROM UNFAIR DISCRIMINATION. EVEN IF ISA IS UNAWARE OF ANY PATENT COVERING THIS STANDARD, THE USER IS CAUTIONED THAT IMPLEMENTATION OF THE STANDARD MAY REQUIRE USE OF TECHNIQUES, PROCESSES, OR MATERIALS COVERED BY PATENT RIGHTS. ISA TAKES NO POSITION ON THE EXISTENCE OR VALIDITY OF ANY PATENT RIGHTS THAT MAY BE INVOLVED IN IMPLEMENTING THE STANDARD. ISA IS NOT RESPONSIBLE FOR IDENTIFYING ALL PATENTS THAT MAY REQUIRE A LICENSE BEFORE IMPLEMENTATION OF THE STANDARD OR FOR INVESTIGATING THE VALIDITY OR SCOPE OF ANY PATENTS BROUGHT TO ITS ATTENTION. THE USER SHOULD CAREFULLY INVESTIGATE RELEVANT PATENTS BEFORE USING THE STANDARD FOR THE USERS INTENDED APPLICATION.

ISA-75.08.05-2002 (R2007)

-4-

HOWEVER, ISA ASKS THAT ANYONE REVIEWING THIS STANDARD WHO IS AWARE OF ANY PATENTS THAT MAY IMPACT IMPLEMENTATION OF THE STANDARD NOTIFY THE ISA STANDARDS AND PRACTICES DEPARTMENT OF THE PATENT AND ITS OWNER. ADDITIONALLY, THE USE OF THIS STANDARD MAY INVOLVE HAZARDOUS MATERIALS, OPERATIONS OR EQUIPMENT. THE STANDARD CANNOT ANTICIPATE ALL POSSIBLE APPLICATIONS OR ADDRESS ALL POSSIBLE SAFETY ISSUES ASSOCIATED WITH USE IN HAZARDOUS CONDITIONS. THE USER OF THIS STANDARD MUST EXERCISE SOUND PROFESSIONAL JUDGMENT CONCERNING ITS USE AND APPLICABILITY UNDER THE USERS PARTICULAR CIRCUMSTANCES. THE USER MUST ALSO CONSIDER THE APPLICABILITY OF ANY GOVERNMENTAL REGULATORY LIMITATIONS AND ESTABLISHED SAFETY AND HEALTH PRACTICES BEFORE IMPLEMENTING THIS STANDARD. THE USER OF THIS DOCUMENT SHOULD BE AWARE THAT THIS DOCUMENT MAY BE IMPACTED BY ELECTRONIC SECURITY ISSUES. THE COMMITTEE HAS NOT YET ADDRESSED THE POTENTIAL ISSUES IN THIS VERSION. The following people served as members of ISA Committee SP75.08 and approved ANSI/ISA-75.08.05-2002: NAME W. Weidman, Chairman H. Baumann G. Borden R. Brodin F. Cain R. Chown B. Hatton J. Reed H. Sonderegger COMPANY Parsons Energy & Chemicals Group HB Services Partners LLC Consultant Emerson Process Management Flowserve Corporation OTEC Process Systems Inc. Dezurik Norriseal Anvil International Inc.

The following people served as members of ISA Committee SP75 and approved ANSI/ISA-75.08.05-2002: NAME D. Buchanan, Chairman W. Weidman, Managing Director K. Schoonover, Secretary A. Abromaitis H. Backinger G. Barb H. Baumann J. Beall* W. Black G. Blackwell H. Boger* G. Borden S. Boyle R. Brodin* F. Cain A. Engels H. Fuller J. George COMPANY Consultant Parsons Energy & Chemicals Group Con-Tek Valves Inc. Red Valve Co Inc. Consultant Consultant HB Services Partners LLC Emerson Process Management Curtiss-Wright Flow Control Corporation Industrial Valve Masoneilan Dresser Consultant Metso Automation USA Inc. Emerson Process Management Flowserve Corporation Praxair Inc. Valvcon Corporation Richards Industries

-5L. Griffith J. Jamison R. Jeanes J. Kersh C. Langford W. Lestan* A. Libke* R. Louviere J. McCaskill A. McCauley R. McEver* H. Miller T. Molloy L. Ormanoski J. Ozol W. Rahmeyer J. Reed A. Shea* E. Skovgaard H. Sonderegger ______ * One vote per company.

ISA-75.08.05-2002 (R2007)

Consultant Bantrel Inc. TXU Electric M W Kellogg Company Cullen G. Langford Inc. Masoneilan Dresser SPX Valves & Controls DeZurik Products Services Unlimited Power Chokes Chagrin Valley Controls Inc. Emerson Valve Automation Control Components Inc. CMES Inc. Frick Company Northern States Power Utah State University Norriseal SPX Valves & Controls DeZurik Products Leslie Controls Inc. Anvil International Inc.

ANSI/ISA-75.08.05-2002 was approved for publication by the ISA Standards and Practices Board on 26 September 2002. NAME M. Zielinski D. Bishop D. Bouchard M. Cohen M. Coppler B. Dumortier W. Holland E. Icayan A. Iverson R. Jones V. Maggioli T. McAvinew A. McCauley, Jr. G. McFarland R. Reimer J. Rennie H. Sasajima I. Verhappen R. Webb W. Weidman J. Weiss M. Widmeyer R. Wiegle C. Williams G. Wood COMPANY Emerson Process Management David N Bishop, Consultant Paprican Consultant Ametek, Inc. Schneider Electric Southern Company ACES Inc Ivy Optiks Dow Chemical Company Feltronics Corporation I&C Engineering, LLC Chagrin Valley Controls, Inc. Westinghouse Process Control Inc. Rockwell Automation Factory Mutual Research Corporation Yamatake Corporation Syncrude Canada Ltd. POWER Engineers Parsons Energy & Chemicals Group KEMA Consulting Stanford Linear Accelerator Center CANUS Corporation Eastman Kodak Company Graeme Wood Consulting

ISA-75.08.05-2002 (R2007)

-6-

The following people served as members of ISA Subcommittee SP75.08 and reaffirmed ISA-75.08.05-2002 (R2007): NAME W. Weidman, Chair H. Baumann G. Borden F. Cain R. Chown R. Duimstra V. Mezzano J. Reed J. Young COMPANY Worley Parsons Consultant Consultant Flowserve Corporation Otec Process Systems Inc. Fisher Controls International Inc. Fluor Corporation Consultant Dow Chemical Company

The following people served as members of ISA Committee SP75 and reaffirmed ISA-75.08.05-2002 (R2007): NAME J. Young, Chair W. Weidman, Managing Director H. Backinger H. Baumann J. Beall W. Black H. Boger G. Borden S. Boyle J. Broyles F. Cain W. Cohen R. Duimstra J. Faramarzi J. George H. Hoffmann J. Jamison R. Jeanes C. Langford A. Libke G. Liu J. McCaskill A. McCauley R. McEver V. Mezzano T. Molloy L. Ormanoski J. Ozol W. Rahmeyer J. Reed E. Skovgaard COMPANY Dow Chemical Company Worley Parsons Consultant Consultant Emerson Process Management Curtiss-Wright Flow Control Corporation Masoneilan Dresser Consultant Metso Automation USA Inc. Enbridge Pipelines Inc. Flowserve Corporation KBR Fisher Controls International Inc. Control Components Inc. Richards Industries Samson AG OPTI Canada Inc. TXU Electric Cullen G Langford Inc. DeZURIK Water Controls Syncrude Canada Ltd. Power Chokes Chagrin Valley Controls Inc. Consultant Fluor Corporation CMES Inc. York Process Systems NMC Prairie Island Nuclear Plant Utah State University Consultant Control Valve Solutions

-7-

ISA-75.08.05-2002 (R2007)

This standard was approved for reaffirmation by the ISA Standards and Practices Board on ________________: NAME T. McAvinew, Vice President M. Coppler B. Dumortier D. Dunn W. Holland E. Icayan J. Jamison K. Lindner V. Maggioli A. McCauley G. McFarland R. Reimer N. Sands H. Sasajima T. Schnaare J. Tatera I. Verhappen R. Webb W. Weidman J. Weiss M. Widmeyer M. Zielinski COMPANY Jacobs Engineering Group Ametek Inc. Schneider Electric Aramco Services Company Consultant ACES Inc. Husky Energy Inc. Endress+Hauser Process Solutions AG Feltronics Corporation Chagrin Valley Controls Inc. Emerson Process Mgmt Power & Water Solutions Rockwell Automation E I du Pont Yamatake Corporation Rosemount Inc. Tatera & Associates Inc. MTL Instrument Group Robert C Webb PE Worley Parsons Applied Control Solutions LLC Consultant Emerson Process Management

This page intentionally left blank.

-9-

ISA-75.08.05-2002 (R2007)

Contents
1 2 3 4 5 Scope ................................................................................................................................................... 11 Purpose................................................................................................................................................ 11 Definitions ............................................................................................................................................ 11 Dimensional data ................................................................................................................................. 11 References........................................................................................................................................... 13

Annex A Dimensions for metrically sized valves .................................................................................... 13

This page intentionally left blank.

11

ISA-75.08.05-2002 (R2007)

Scope

This standard applies to buttweld-end globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm (18 inches) for Classes 150 through 2500, having top, top and bottom, port, or cage guiding.

Purpose

2.1 The purpose of this standard is to aid users in their piping designs by providing buttweld-end globestyle control valve dimensions, without giving special consideration to the equipment manufacturer to be used. 2.2 The short-long dimensions provided in Table 1 clarify 2.1 by consolidating the diversity of existing manufacturers' lengths into two sets of dimensions for each valve size. Before using either the short or long dimensions, the piping designer should confirm with the selected valve manufacturer which dimension is correct for the valve(s) being supplied.

Definitions

For definitions of terms used in this standard, see ANSI/ISA-75.05.01-2000 (R2005), Control Valve Terminology.

Dimensional data

For face-to-face dimensions for buttweld-end globe-style control valves, see Table 1.

ISA-75.08.05-2002 (R2007)

12

Table 1 Face-to-face dimensions for buttweld-end globe-style control valves


Nominal Valve Size PN 20, 50, & 100 (Classes 150, 300, & 600) Dimension A mm mm 15 20 25 40 50 65 80 100 150 200 250 300 350 400 450 Inches 1/2 3/4 1 1-1/2 2 2-1/2 3 4 6 8 10 12 14 16 18 Short 187 187 187 222 254 292 318 368 451 543 673 737 851 1016 1143 Long 203 206 210 251 286 311 337 394 508 610 752 819 1029 1108 inches Short 7.38 7.38 7.38 8.75 10.00 11.50 12.50 14.50 17.75 21.38 26.50 29.00 33.50 40.00 45.00 Long 8.00 8.25 8.25 9.88 11.25 12.25 13.25 15.50 20.00 24.00 29.62 32.35 40.50 43.62 PN 150 & 250 (Classes 900 & 1500) Dimension A mm Short 194 194 197 235 292 292 318 368 508 610 762 914 Long 279 279 279 330 375 375 460 530 768 832 991 1130 1257 1422 1727 inches Short 7.62 7.62 7.75 9.25 11.50 11.50 12.50 14.50 24.00 24.00 30.00 36.00 Long 11.00 11.00 11.00 13.00 14.75 14.75 18.12 20.88 30.25 32.75 39.00 44.50 49.50 56.00 68.00 mm Short 216 216 216 260 318 318 381 406 610 762 1016 1118 Long 318 318 318 359 400 400 498 575 819 1029 1270 1422 1803 PN 420 (Class 2500) Dimension A inches Short 8.50 8.50 8.50 10.25 12.50 12.50 15.00 16.00 24.00 30.00 40.00 44.00 Long 12.50 12.50 12.50 14.12 15.75 15.75 19.62 22.62 32.25 40.25 50.00 56.00 71.00 mm 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 3.2 3.2 3.2 3.2 inches 0.062 0.062 0.062 0.062 0.062 0.062 0.062 0.062 0.062 0.062 0.062 0.125 0.125 0.125 0.125 Tolerance

13

ISA-75.08.05-2002 (R2007)

References

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME B16.25-2003 ASME B16.34-2004 Available from: Buttwelding Ends Valves Flanged, Threaded, and Welding End ASME Three Park Avenue New York, NY 10016-5990 Tel: 800-843-2763 http://www.asme.org

INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 60534-3-3 (1998) Industrial-Process Control Valves - Part 3-3: Dimensions End-to-End Dimensions for Buttweld, Two-Way, Globe-Type, Straight Pattern Control Valves IEC 3, rue de Varemb P.O. Box 131 CH - 1211 Geneva 20 Switzerland http://www.iec.ch

Available from:

This page intentionally left blank.

13

ISA-75.08.05-2002 (R2007)

Annex A Dimensions for metrically sized valves


This annex is not part of ISA-75.08.05-2002 (R2007), but is included to facilitate its use. The ANSI standards listed in the bibliography contain valve body design information in addition to face-toface dimensions. Dimensions for metrically sized valves are nominal conversions that are conventionally used in the Manufacturers Standardization Society (MSS) of the Valve and Fitting Industry's Publication MSS-SP-86-2002, and in International Standards Organization (ISO) and International Electrotechnical Commission (IEC) documents.

This page intentionally left blank.

Developing and promulgating sound consensus standards, recommended practices, and technical reports is one of ISAs primary goals. To achieve this goal the Standards and Practices Department relies on the technical expertise and efforts of volunteer committee members, chairmen and reviewers. ISA is an American National Standards Institute (ANSI) accredited organization. ISA administers United States Technical Advisory Groups (USTAGs) and provides secretariat support for International Electrotechnical Commission (IEC) and International Organization for Standardization (ISO) committees that develop process measurement and control standards. To obtain additional information on the Societys standards program, please write: ISA Attn: Standards Department 67 Alexander Drive P.O. Box 12277 Research Triangle Park, NC 27709 ISBN:

Вам также может понравиться