0 оценок0% нашли этот документ полезным (0 голосов)
1K просмотров4 страницы
This document describes several protective coating products from NabaKEM, including CPU-50A/50B, S-830, R-820, and UC-100. CPU-50A/50B is an insulating, moisture-proof coating for printed circuit boards to protect against moisture, acids, dust and vibration. S-830 is a silicone varnish spray that forms a flexible, water-resistant film meeting military standards. R-820 is an RTV silicone spray adhesive and sealant. UC-100 is a urethane coating spray that forms a clear, flexible film for sealing electrical parts against moisture, corrosion and dirt.
This document describes several protective coating products from NabaKEM, including CPU-50A/50B, S-830, R-820, and UC-100. CPU-50A/50B is an insulating, moisture-proof coating for printed circuit boards to protect against moisture, acids, dust and vibration. S-830 is a silicone varnish spray that forms a flexible, water-resistant film meeting military standards. R-820 is an RTV silicone spray adhesive and sealant. UC-100 is a urethane coating spray that forms a clear, flexible film for sealing electrical parts against moisture, corrosion and dirt.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
This document describes several protective coating products from NabaKEM, including CPU-50A/50B, S-830, R-820, and UC-100. CPU-50A/50B is an insulating, moisture-proof coating for printed circuit boards to protect against moisture, acids, dust and vibration. S-830 is a silicone varnish spray that forms a flexible, water-resistant film meeting military standards. R-820 is an RTV silicone spray adhesive and sealant. UC-100 is a urethane coating spray that forms a clear, flexible film for sealing electrical parts against moisture, corrosion and dirt.
Авторское право:
Attribution Non-Commercial (BY-NC)
Доступные форматы
Скачайте в формате PDF, TXT или читайте онлайн в Scribd
INSULATING, MOISTURE-PROOF AND SEALING PROTECTION COATING AGENT
FOR PRINTED CIRCUIT BOARD (PCB) NABAKEM CPU is insulation, moisture-proof and sealing protection coating agent to protect PCB from moisture, water, acid, alkali, dust and vibration etc. and prevent malfunction, short circuit and electrical property deterioration. NABAKEM CPU is excellent in physical property, for example transparence, elasticity, electrical insulation, moisture-proof, vibration-proof and chemical resistance etc. to be widely used as protection coating for electronic and electric product. Good transparence. Insulation and moisture-proof effect. Short circuit prevention. Excellent elasticity. Excellent adhesive strength. Chemical resistance. Feature
Excellent insulation, moisture-proof, water-proof and vibration-proof.
Flexibility and good durability. Excellent adhesive strength. Prevent arcing corona short circuit. Excellent insulation and chemical resistance. Easy to replace the parts. Uses
Protection coating for washing machine, inverter, communication equipment, OA equipment,
computer and vending machine etc. How to USE Remove oilless and moisture from the place to be coated. If necessary, PCB may be flushed. However, urethane material has good adhesive strength even if flux is not removed shake CPU-50A(main material) and CPU-50B(curing agent) slightly before mixing them. Blending ratio : CPU-50A(main material) : CPU-50B(curing agent) = 64ml : 104ml Put CPU-50A and CPU-50B into agitation container, and remove bubble them sufficiently for more than 30 minutes and apply them to PCB after using it. Flush agitator with solvent (NABAKEM MC-2) immediately after using it. If this agent is hardened, remove it completely with scraper. Packing
Forms colorless, flexible film. Excellent adhesion. Meets performance requirement of MIL-A-46146 Resist water and acids.
Uses
Communications equipment tools, electric parts and components, wires and inside walls of control boxes.
Packing
Aerosol 420㎖/can, 20cans/Bo
RTV SILICONE SPRAY R-820(RTV ADHESIVE, SEALING, COATING AGENT
Feature
High arc resistance, heat resistance.
Forms colorless film. Excellent adhesion. Non-corrosive. Meets performance requirement of MIL-A-46146.
Uses
PCB, coils, control boxes, generators, woods, toys and motors.
Packing
Aerosol 300g/can, 20cans/Box
URETHANE COATING SPRAY UC-100
Feature
Clear, flexible film.
Ideal for sealing electrical and electrical and electronic parts. Protect against rust, moisture, corrosion, dirt and alkali. Excellent adhesion. Water-proof. Meets performance requirements of MIL-A-46146. All dries in minutes.
Uses
PCB, coils, control boxes, generators, woods, toys and motors.