Академический Документы
Профессиональный Документы
Культура Документы
Table of Contents
components and other heavy-duty design and Wedge-Latch elements that make them the most Tough and Trusted.
NEW! Who We Are ... Our Brands ..........................4 NEW! Products .......................................................5 COUPLERS
Heavy Duty Couplers ................................................6-7 Round Gooseneck Couplers .......................................8 Square Gooseneck Couplers......................................9 Stamped Couplers .................................................10-11 Fold-Away Couplers..............................................12-14 Brake Actuators .....................................................15-18
capabilities, such as the Fas-Lok quickoperating latching mechanism. Fulton winches cover a wide range of gearing, capacity, and capability options. These winches are designed specifically for small-implement raising and lowering, pulling watercraft onto trailers, and other small to moderate load duty and are the industry standard. Fulton provides OEM and aftermarket parts and accessories, including wheel protection, locks, brackets, and other equipment designed to deliver specific solutions to a wide range of trailer and towing applications.
WINCHES
How To Select a Hand Winch ..................................19 Single-Speed Trailer Winches .............................20-21 Two-Speed Trailer Winches......................................22 Worm Gear Winches..................................................23 Poultry Winches..........................................................23 Brake Winches.......................................................24-25 Winch Accessories.....................................................25
TRAILER ACCESSORIES
Ball Mounts, Receiver Pins, RVAA....................26-27 Hitch Balls ..............................................................28-29 Chains ...........................................................................30 Tie Down Rings, Quick Links, J-Clip .......................31 Tire Carriers .................................................................32
SECURITY
Locks - Receiver, Coupler, Misc. ......................38-39 Locks - RV Entry Doors and Accessories.......40-42 Access Doors.........................................................43-47
INTERNATIONAL STANDARD
SAE International J2638 Standard ........................48
JACKS WINCHES COUPLERS Fultons High Performance Series delivers superior performance in heavy-duty applications, incorporating the highest rated protective finishes and advanced features.
JACKS WINCHES COUPLERS Fultons Standard Series delivers dependable performance in medium-duty applications.
JACKS WINCHES COUPLERS Fultons Value Series is the economical choice for light-duty applications.
5 YEAR
WARRANTY
YEAR
WARRANTY
H E AV Y D U T Y J A C K S COUPLERS
5 YEAR
WARRANTY
LIGHTING - WIRING B R E A K A W AY S Y S T E M S
5 YEAR
WARRANTY
028499
028630 44150W
COLLAR-LOK COUPLERS
TONGUE MOUNTS NO. 2 TONGUE MOUNT
2-1/4" outside diameter x 1-3/4" inside diameter steel tubing.
3B STYLE
7,000 lbs. gross trailer weight for 2" ball.
M - PIN ONLY
CAST COUPLERS
CAST HEAD COUPLERS
WEDGE-LATCH
Patent Pending
Cast A-frame couplers with patented replaceable hardware for longer service life.
WARNING
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
COLLAR-LOK COUPLERS
Gross Trailer Weight Part No. Model No. Overall Length Latches Ball Size SAE Class Coupler Style Description Unit Wt. Lbs.
NO. 2 ROUND TUBULAR TONGUE MOUNT 7,000 lbs. 12,500 lbs. 5,000 lbs. 7,000 lbs. 12,500 lbs. 5,000 lbs.
028381 028242 028461 028442 028382 028244 028387 028243 028462 028444 028383 028245 2B2H 2B2M 4B2H 4B2M 2B4H 2B4M 3B4H 3B4M 4B4H 4B4M 2B5H 2B5M 10-3/4" 10-3/4" 12-3/4" 12-3/4" 16-1/4" 16-1/4" 16-1/4" 16-1/4" 16-1/2" 16-1/2" 16-1/4" 16-1/4" High Profile Pin Style High Profile Pin Style High Profile Pin Style High Profile Pin Style High Profile Pin Style High Profile Pin Style Pin Style Pin Style High Profile Low Profile High Profile Low Profile High Profile Low Profile High Profile 2" 2" 2-5/16" 2-5/16" 2" 2" 2" 2" 2-5/16" 2-5/16" 2" 2" 2" 2-5/16" 2" 2" 2" 2" 2-5/16" 2-5/16" N/A III III N/A N/A III III IV IV N/A N/A III III IV N/A III III IV IV N/A N/A N/A 2B Style 2B Style 4B Style 4B Style 2B Style 2B Style 3B Style 3B Style 4B Style 4B Style 2B Style 2B Style 3B Style 4B Style 2B Style 2B Style 3B Style 3B Style 4B Style 4B Style N/A 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing 2-1/4" OD x 1-3/4" ID, steel tubing High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3" square or rectangular trailer tongue High-strength steel for 3-1/2" OD round trailer tongue High-strength steel for 3-1/2" OD round trailer tongue Fits inside 2-7/8" wide channel Fits inside 2-7/8" wide channel High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue High-strength steel for 50 trailer tongue Kit includes high profile latch handle, latch wire, latch pin, push nut, and cotter pin. 12.0 12.0 16.0 16.0 13.0 13.0 13.0 13.0 17.0 17.0 13.0 13.0 11.0 12.0 15.0 15.0 15.0 15.0 21.0 21.0 N/A
NO. 5 3 ROUND STRAIGHT TONGUE MOUNT NO. 6 ADJUSTABLE CHANNEL MOUNT 7,000 lbs. 028390 3B6M 9.5" 10" 12,500 lbs. 028630 4B6M NO. 8 A-FRAME TONGUE MOUNT 5,000 lbs. 7,000 lbs. 12,500 lbs.
028384 028288 028386 028287 028463 028499 024200 2B8H 2B8L 3B8H 3B8L 4B8H 4B8L N/A 16" 16" 16" 16" 16-1/2" 16-1/2" N/A
COUPLER KIT
CAST COUPLERS
Gross Trailer Weight Part No. Overall Length Latches Ball Size SAE Class Description Unit Wt. Lbs.
WEDGE-LATCH CAST HEAD COUPLERS 18" 8,000 lbs. 43805W0317 18" 12,500 lbs. 44125W0317 15,000 lbs.
44150W0317 44150WQ317 44150WH317 A200C0317 A2003C0317 A2005C0317 A256C0317 A2563C0317 A2565C0317 AC3000300 AC5000300 18" 18" 18" 8-1/2" 9-1/4" 9-1/4" 9-1/4" 9-1/2" 9-1/2" 8" Height 11-3/4" Height
Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch Wedge Latch N/A N/A
2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" N/A N/A 2-5/16" 2-5/16"
Round jack mount, 50" A-frame Round jack mount, 50" A-frame Round jack mount, 50" A-frame Square jack mount, 50" A-frame Round jack mount, 50" A-frame, for bolt-on applications Cast head includes mounting hardware, adjustable height Cast head includes bolts and 3-position channel, adjustable height Cast head includes bolts and 5-position channel, adjustable height Cast head includes mounting hardware, adjustable height Cast head includes bolts and 3-position channel, adjustable height Cast head includes bolts and 5-position channel, adjustable height 4-hole, 3-position bracket, with 4" of vertical adjustment, adjustable height 6-hole, 5-position bracket, with 8" of vertical adjustment, adjustable height Cast head, 4-1/2" mount pattern, grey primer coat Cast head, 4-1/2" mount pattern, grey primer coat
14.3 18.6 18.6 18.6 18.6 9.5 13.7 15.8 10.1 14.3 16.4 4.18 6.32 14.0 15.0
14,000 lbs.
FLAT MOUNT WEDGE-LATCH CAST HEAD COUPLER N/A Wedge Latch 20,000 lbs. 4420000317 N/A Wedge Latch 25,000 lbs. 4425000317
NOTE: Other custom-made designs are available upon request. DENOTES MOST POPULAR
0289500300 shown with BHLO 0600 lock (see page 38) 0289500300 0287600300 GN24
ROUND GOOSENECK FIXED COUPLER N/A 2-5/16" 20,000 lbs. 0287690300 33.00" ROUND GOOSENECK ADJUSTABLE COUPLER 8.0" 2-5/16" 20,000 lbs. 0287600300 29.20"
0287610300 27.20" 8.0" 2-5/16"
Fixed base coupler. Adjustable gooseneck coupler. Adjustable gooseneck coupler. No outer tube. 4.5" diameter outer tube, 4" diameter inner tube, with cast locking plates. 3/4" load bearing pin. 4.5" diameter outer tube, 4" diameter inner tube, with cast locking plates. 3/4" load bearing pin. Cast steel gooseneck coupler designed for easy welding to 3" or 4" diameter tubing. Quick and easy latching action eliminates need to be in tow vehicle for hook-up. Kit includes torsion spring, coupler locking shaft, curved handle assembly, 3/4" shaft retaining ring, centerlock nut 1/2-13 Kit includes coupler assembly, locking pin assembly, locking pin cover, bulldog label, and warning label.
ROUND GOOSENECK ADJUSTABLE COUPLER 25,000 lbs. 0289250300* 29.30" 8.0" 2-5/16" 8.0" 2-5/16" 30,000 lbs. 0289500300* 29.30" GOOSENECK COUPLER HEAD N/A N/A 2-5/16" 24,000 lbs. GN240200 GOOSENECK COUPLER HEAD GN24 REPAIR KIT 1542S01 N/A N/A N/A N/A GOOSENECK COUPLER KIT 0287740300 N/A N/A
*US Patent 5,382,109
N/A
N/A
2-5/16"
10.0
WARNING
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
028900 0289600300
SQUARE GOOSENECK ADJUSTABLE COUPLER 40" 25,000 lbs. 0289600300 32" 32" 39" 30,000 lbs. 028900
US Patent 5,382,109
8" 7"
2-5/16" 2-5/16"
4.5" square outer tube, 4.0" square inner tube. (1) 3/4" diameter set screw. 4.5" square outer tube with .25" wall, 4.0" square inner tube with .313" wall. Includes topwind crank.
63.5 82.0
WARNING
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
STAMPED COUPLERS
STAMPED COUPLERS
The most popular coupler mechanism ever developed, the Fas-Lok originated as a Fulton brand and is offered in a full line of SAE Class I through IV rated straight tongue stamped couplers. The Fas-Lok latching mechanism allows quick and easy trailer hook-up, and is factory adjusted for end user convenience.
22300
PREMIUM FINISH
34300
Environmentally friendly. Self-healing. Maximum corrosion resistance. Used in salt water environments and other demanding climate applications. 1200 hour salt spray rating per ASTMB117.
STAMPED COUPLERS
HANDWHEEL COUPLERS
A-FRAME
High-strength stamped couplers for 50-degree frames.
10
STAMPED COUPLERS
Finish Package Quantity
2,000 lbs.
3,500 lbs.
5,000 lbs.
Couplers do not include hitch balls. Class III hardware couplers can be used on Class II trailers.
NOTE: Review price list or contact customer service for package quantities and full part number. NOTE: Blue shaded lines above indicates SharkSkin coating, Fulton High Performance NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
Part No.
Description
COUPLER ACCESSORIES
CH 0701 CH 0201 Coupler Handle, Carded Coupler Handle, Bulk Carton/6 Bulk/50
REPLACEMENT PARTS
Kit No. Coupler Model Number(s)
WARNING
Failure to close coupler securely before towing or failure to use with specified ball size may result in serious injury or death.
11
FOLD-AWAY COUPLERS
FOLD-AWAY COUPLERS
Fold-Away couplers provide space saving alternatives for easy storage. The patented cast hinge design offer strength coupled with a sleek appearance. Reduces length by 21" or 34" for trailers with 3500 lb. and 5000 lb. gross trailer weight. Allows 21" or 34" of the trailer tongue to fold-away, letting a boat trailer fit inside most smaller garages. Excellent corrosion protection with Z-Max 600-hour clear zinc finish. Installs easily on an existing 3"x3" or 3"x4" trailer tongue. Do-it-yourself kits provide professional results. Includes all mounting hardware and complete instruction manual. Aftermarket - individually cartoned w/litho label, unassembled. OEM - bulk packed, unassembled. Meets SAE J684 requirements. Limited 5 year warranty.
SPACE SAVING!
BOLT-ON
Easy-to-install
WELD-ON
12
FOLD-AWAY COUPLERS
US Patent 6.869.095
FOLD-AWAY COUPLERS
Gross Trailer Weight SERIES Part No. Ball Size SAE Class Description Finish Package Quantity
FOLD-AWAY COUPLERS
S S HP HP S HP HP S S HP HP SBC3530101 SBC3532000 HPB3530101 HPB3530301 SBC3542000 HPB3540101 HPB3540301 SBC5040101 SBC5042000 HPB5040101 HPB5040301 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" II II II II II II II III III III III 21" Coupler Kit, 3" x 3" Tongue, Bolt On, Individually Packaged 21" Coupler Kit, 3" x 3" Tongue, Bolt On, Assembled, Bulk Packaged 34" Coupler Kit, 3" x 3" Tongue, Bolt On, Retail Boxed w/4-Color Label 34" Coupler Kit, 3" x 3" Tongue, Bolt On, Bulk Packaged 21" Coupler Kit, 3" x 4" Tongue, Bolt On, Assembled, Bulk Packaged 34" Coupler Kit, 3" x 4" Tongue, Bolt On, Retail Boxed w/4-Color Label 34" Coupler Kit, 3" x 4" Tongue, Bolt On, Bulk Packaged 21" Coupler Kit, 3" x 4" Tongue, Bolt On, Individually Packaged 21" Coupler Kit, 3" x 4" Tongue, Bolt On, Assembed, Bulk Packaged 34" Coupler Kit, 3" x 4" Tongue, Bolt On, Retail Boxed w/4-Color Label 34" Coupler Kit, 3" x 4" Tongue, Bolt On, Bulk Packaged Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Z-Max 600 Carton/1 Bulk/25 Carton/1 Bulk/50 Bulk/25 Carton/1 Bulk/50 Carton/1 Bulk/25 Carton/1 Bulk/50
3,500 lbs.
5,000 lbs.
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
Includes fold-away hinges, mounting hardware, pivot bolt, pivot pin/clip, extension tube and coupler. Chains and torques bit included with retail packaged items.
BOLT-ON
Easy-to-install
BOLT-ON FOLD-AWAY HINGE KITS (SEE CAPACITY / LENGTH CHARTS PAGE 14)
Gross Trailer Weight SERIES Part No. Ball Size SAE Class Description Finish Package Quantity
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
Includes fold-away hinges, mounting hardware, pivot bolt, pivot pin/clip. Torques bit included with retail packaged items.
13
FOLD-AWAY COUPLERS
Description
Finish
Package Quantity
Weld-On Hinge Kit, 3" x 3" Trailer Tongue Weld-On Hinge Kit, 3" x 4" Trailer Tongue
Bulk/50 Bulk/50
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
Includes raw finish castings ideal for painting or galvanizing, zinc plated pivot bolt and nut, 5/8" diameter hitch pin and clip.
BOLT-ON & WELD-ON FOLD-AWAY HINGECAPACITY/LENGTH KITS CAPACITY / LENGTH CHARTS WELD-ON FOLD-AWAY HINGE KITS CHARTS
PIVOT LENGTH
4,000
48 45 42 39 36 33 30 27
36 31 26 21
14
BRAKE ACTUATORS
7,500 lbs.
Hinge Kits
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value NOTE: For made-to-order custom models contact your Cequent Performance Products Representative.
15
BRAKE ACTUATORS
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value NOTE: For made-to-order custom models contact your Cequent Performance Products Representative.
16
BRAKE ACTUATORS
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value NOTE: For made-to-order custom models contact your Cequent Performance Products Representative.
17
BRAKE ACTUATORS
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
18
TRAILER WINCHES
To Select T Winch Capacity: Minimum Winch Capacity = Maximum Weight of Boat, Including Motor, Fuel, Gear 2
Example: Boat, Motor, Fuel, Gear Weight = 2,800 lbs. 2,800 2 = 1,400 lbs.
XLT18
T3700
LIFTING
PW2002
K2550
KW3000
NOTES
1. Fulton Winches are not designed to be human hoists and should never be operated when there are persons on or under the load being moved. 2. Fulton Winches are rated on the first layer of recommended line on the drum. For maximum efficiency use only the amount of line required. Derate the capacity 10% per additional layer of rope, strap, or cable. 19
We manufacture a full line of Fulton brand single speed winches designed to meet your toughest pulling demands. Our winches feature efficient gear ratios, full-length drum bearings, oil-impregnated shaft bushings, and our Comfort Grip handle for ease of cranking. All gears are high-carbon steel for superb strength and long-term durability. Stamped carbon steel frames provide rigidity for gear alignment and longer cycle life. Zinc finishes provide excellent corrosion resistance in all environments. All models are designed for use with rope or strap. For end user convenience, most models are available with factory installed straps and hooks. Our XLT Series includes stylized polypropylene shell with strap and hook as standard features. The T1300 and T1500 models offer optional gear covers, gear train protection, and added styling like T1500ZC.
PREMIUM FINISH
Environmentally friendly. Self-healing. Maximum corrosion resistance. Used in salt water environments and other demanding climate applications. 1200 hour salt spray rating per ASTMB117.
XLT14
Winch Housing US Patent D407,883 Cover Plate US Patent D395,116
T1500ZC
(ZC-models include strap, hook, and cover) US Patent D434,892
T1602
T1100
T15SS
20
900 lbs.
1,100 lbs.
1,300 lbs.
1,400 lbs.
1,500 lbs.
1,600 lbs.
1,800 lbs.
2,100 lbs.
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value ** Maximum Mechanical Advance - Based on first layer of recommended line on the drum. For maximum efficiency, use only the amount of line required. NOTE: Blue shaded lines above indicates SharkSkin coating
21
T3700
T2025
Rope
Strap
Hub Size
Hand Brake
20' x 2" 3/8" x 2-3/4" grade 5 20' x 2" 3/8" x 2-3/4" grade 5 20' x 2" 3/8" x 2-3/4" grade 5 N/A N/A N/A Cable only 3/8" x 3-1/2" grade 5 3/8" x 3-1/2" grade 5
2,000 lbs.
T2005Z0301 4.1:1&9.8:1 10" T2005S0301 4.1:1&9.8:1 10" T2025 0301 4.1:1&9.8:1 10" T2605 0101 5.1:1&12.2:1 10" T2605 0301 5.1:1&12.2:1 10" T2605Z0101 5.1:1&12.2:1 10" T2605Z0301 5.1:1&12.2:1 10"
1619-01*** 6817 1619-01*** 6817 1619-01*** 6817 1619-01*** 6817 Installed Installed 6817 6817
20' x 2" 3/8" x 3-1/2" grade 5 20' x 2" 3/8" x 3-1/2" grade 5 N/A N/A 3/8" x 3-1/2" grade 5 3/8" x 3-1/2" grade 5
YES N/A YES N/A NO NO NO N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NO NO NO NO NO NO NO NO
2,600 lbs.
T2605B0101 5.1:1&12.2:1 10" T2605B0301 5.1:1&12.2:1 10" T2605S 0301 5.1:1&12.2:1 10" T2625 0101 5.1:1&12.2:1 10" T2625 0301 5.1:1&12.2:1 10" T3205 0101 5.1:1&12.2:1 10" T3205 0301 5.1:1&12.2:1 10"
20' x 2" 3/8" x 2-3/4" grade 5 N/A N/A N/A N/A N/A N/A N/A N/A Cable only Cable only Cable only Cable only Cable only Cable only Cable only Cable only
1619-01*** 6817
1-3/4" 1619-01*** 6817 1-3/4" 1619-01*** 6817 1-3/4" 1619-01*** 6817 1-3/4" 1619-01*** 6817 1-3/4" 1-3/4" 1-3/4" 1-3/4" Installed Installed Included Included 6817 6817 9235 9235
3,200 lbs.
T3205B0101 5.1:1&12.2:1 10" T3205B0301 5.1:1&12.2:1 10" T3700 0101 5.1:1&12.2:1 10"
3,700 lbs.
T3700 0301 5.1:1&12.2:1 10" 102:1 Two-way
The S version winches have a narrower drum to accommodate a 2" wide strap. ** Maximum Mechanical Advance - Based on first layer of recommended line on the drum. For maximum efficiency, use only the amount of line required. *** Brake Kit 1619-01 available as option not furnished. Only winches that are shown to accommodate steel cable should be used with steel cable. Cable keeper kits are included with the winches specifying steel cable. Winches rated for steel cable have a larger drum hub to reduce or lessen chance of kinking or fraying. Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. Fulton brand two-speed winches are designed for boat trailer and other pulling applications, which require the freewheeling feature of ratchet type winches. If moving loads requiring vertical lifting, or positive load control in both directions, choose a Fulton brake winch from page 24. 3. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch load capacity must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 4. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
22
KW3000
KW1500
Drive
2,000 lbs.
907 kg
3,000 lbs.
1,361 kg
Regular drum Handle drive KW2000 0103 Regular drum Handle drive KW3000 0103 Regular drum Drive ring and handle
90' (27 m)
60' (18 m)
8" handle (20.3 cm) 8" handle (20.3 cm) Drive ring 10" handle (25.4 cm)
Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 3. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
POULTRY WINCHES
Fulton brand poultry winches are designed to meet the tough demands of the commercial poultry industry. Whether raising and lowering feeders, heaters, vent doors, nesting, or watering equipment, our poultry winches make your work easier. Put a Fulton brand winch to work and understand why our products last.
P1200 PW2002
Capacity
Part No.
Description
Gear Ratio
Drum Diameter
Drive
1,500 lbs.
680 kg
2,000 lbs.
907 kg
PW2002 0303
100' (30 m) 115' (35 m) 172' (53 m) 86' ea. side (26 m)
45' (14 m) 50' (15 m) 72' (22 m) 36' ea. side (11 m)
2" (50.8 mm) 1.5" (38.1 mm) 1.5" (38.1 mm) 1.5" (38.1 mm)
Notes: 1. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 2. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 3. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
23
BRAKE WINCHES
BRAKE WINCHES
K1051 K650
Fulton brand K-Series self-activating automatic brake winches hold the load securely when the crank handle is released. Unlike our competitors, no minimum line load is required to activate the brake or pay out cable from the winch. Typical applications include boat lifts, grain augers, manual fork lifts, retractable swing keels, dumpster lid lifts, and manual hoists. Drum hubs are 10 times the recommended cable size to maximize cable life. The KX series offer plated gear covers for improved gear train protection and a dual ratchet system.
K2550 KX1550
KR1500
BRAKE WINCHES
Part No. Max. Rated Line Pull 1st Layer Full Drum Max. Cable Size Data Free Cable (7 x19 Galvanized Aircraft Cable) Mechanical Data Wheel Included Diameter Drum Storage Test Strength Gear Ratio Handle Length Drum Hub Dia. Package Quantity
Only winches that are shown to accommodate steel cable should be used with steel cable. Cable keeper kits are included with the winches specifying steel cable. Winches rated for steel cable have a larger drum hub to reduce or lessen chance of kinking or fraying.
24
BRAKE WINCHES
Notes: 1. Fulton brand brake winches meet ASAE S361:3 standards. 2. Winch mounting hardware sold separately. Refer to instruction sheet for recommended bolt size and grade. 3. All Fulton brand winches are rated on the first layer of recommended rope, strap, or cable. The winch must be derated as additional layers are used. Derate the capacity 10% per additional layer of rope, strap, or cable. 4. Fulton brand winches are NOT designed to be human hoists and should never be operated when there are persons on, around, or under the load being moved.
D C E A B
WS20 / WSP12
WR20
WC325
WS20HD0600
WINCH ACCESSORIES
SERIES Part No. Description Package Quantity
WINCH ACCESSORIES
S S S S S S S HP HP HP HP WR20 0100 WS20 0200 WS20 0700 WS20DP0200 WSP12 0100 WSP12 0200 WSP12D0200 WS20HD0200 WS20HD0600 WC325 0100 WC750 0100 Rope and Hook - Polypropylene rope with hook, 3/8" x 20', 480 lb. maximum working load Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20', 2,600 lb. maximum working load Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20', 2,600 lb. maximum working load Winch Strap and Hook - Nylon web winch strap with hook, 2" x 20', 2,600 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12', 1,800 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12', 1,800 lb. maximum working load Personal Watercraft Winch Strap with Hook and Loop - includes loop Nylon web winch strap with hook, 2" x 12', 1,800 lb. maximum working load Heavy Duty Winch Strap and Hook - 2" x 20', 10,000 lb. minimum breaking strength, 4,000 lb. maximum working load Heavy Duty Winch Strap and Hook - 2" x 20', 10,000 lb. minimum breaking strength, 4,000 lb. maximum working load Winch Cable and Hook - 3/16" x 25' galvanized cable, 4,200 lb. breaking strength Winch Cable and Hook - 7/32" x 50' galvanized cable, 5,600 lb. breaking strength Clam / 4 per Master Bulk 20 Clam / 6 per Master 12 per Counter Display Box Clam / 6 per Master Bulk 20 12 per Counter Display Box Bulk 20 Clam / 4 per Master Clam / 4 per Master Clam / 6 per Master
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
25
BALL MOUNTS
FULTON BALL MOUNTS
We offer a full line of removable ball mounts. Pin and clips are sold separately. They are for use with most square receivers. The mounts meet or exceed requirements for V-5 specifications. Available in steel or aluminum. Steel ball mounts are either clear zinc, chrome or black powder finish. Patented design on cushion ball mounts reduces "slams and bangs" while towing.
BALL MOUNTS
Gross Trailer Weight / Tongue Weight SERIES Part No. Cross Reference Size Finish Receiver Opening Length Rise Drop Shank Hole Size
5,000 lbs./ 500 lbs. ALUMINUM BALL MOUNTS 8,000 lbs./ 800 lbs.
HP HP HP
BALL MOUNTS 3,000 lbs./ S 300 lbs. 5,000 lbs./ 500 lbs. 6,000 lbs./ 600 lbs. 10,000 lbs./ 1,000 lbs.
S S S S S S S S
BM956 0227 Receiver tube size 2" x 2" x 10" Black Powder 21288 Receiver tube size 2" x 2" x 10" Chrome BM983 0227 Receiver tube size 2" x 2" x 10-1/8" Black Powder 21289 Receiver tube size 2" x 2" x 10-1/8" Chrome BM926 0227 Receiver tube size 2" x 2" x 8" Black Powder 21287 Receiver tube size 2" x 2" x 8" Chrome 4280 Receiver tube size 2" x 2", for 1-1/4" ball Clear Zinc 4281 Receiver tube size 2" x 2", for 1-1/4" ball Clear Zinc
NOTE: SERIES full details on page 4. HP = Fulton High Performance, S = Fulton Standard, V = Fulton Value
26
74108
RECEIVER PINS
74108 74055A 74858 1/2" pin set for 1-1/4" ball mounts 5/8" pin set for 2" ball mounts 5/8" 1 piece pull pin with integral clip II III III
74858
27
HITCH BALLS
Chrome
1-7/8" HITCH BALLS 2,000 lbs. 2" HITCH BALLS 3,500 lbs. 6,000 lbs.
665200 665205 665210 665215 665220 665225 665230 Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Bulk Ind. Pack Bulk Ind. Pack Bulk Ind. Pack Bulk Bulk Ind. Pack Bulk Ind. Pack 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 3/4" 3/4" 3/4" 3/4" 1" 1" 1-1/4" 1" 1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2.38" 2.38" 2.12" 2.12" 2-3/4" 2.12" 2.12" 2-3/4" 2-3/4" 665100 665105 665110 665115 Chrome Chrome Chrome Chrome Bulk Ind. Pack Bulk Ind. Pack 1-7/8" 1-7/8" 1-7/8" 1-7/8" 3/4" 3/4" 1" 1" 1-1/2" 1-1/2" 2.12" 2.12"
8,000 lbs. 2-5/16" HITCH BALLS 665300 6,000 lbs. 665305 12,000 lbs.
665310 665315
HITCH BALLS
Capacity Zinc Part No. Bulk Zinc Part No. Package Chrome Part No. Bulk Chrome Part No. Package Stainless Steel Part No. Package Hitch Ball Diameter Shank Diameter Shank Length
1110 SERIES 1-7/8" HITCH BALLS 2,000 lbs. 2" HITCH BALLS 3,500 lbs. 6,000 lbs.
63821 63827 63833 63835 63888 63820 63822 63826 63832 63834 74008PDQ 74020PDQ 74010PDQ 74021PDQ 57003 57004 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 3/4" 3/4" 1" 1" 1" 1" 1-1/4" 1-1/2" 2-3/8" 2" 2" 2" 2" 2-1/2" 63811 63881 63812 63810 63816 74013PDQ 74006PDQ 1-7/8" 1-7/8" 1-7/8" 3/4" 3/4" 1" 2-3/8" 1-1/2" 2"
Part No.
Description
ACCESSORIES
BC 0100 Hitch ball cover
28
74307
2 2 3
ACCESSORIES
58109 Hitch ball bushings, contains 1 - reducer from 1" to 3/4"
58109
028351
COUPLER BALLS 3,000 lbs. 028375 5,000 lbs. 028351 7,000 lbs. 028352 12,500 lbs. 028400
2" with 3/4" shank 2" with 1" shank 2" with 1" shank (heat treated) 2-5/16" with 1-1/4" shank
29
TRAILER ACCESSORIES
CHAINS
CHA0080340
74050
CHA0010340
CHA0030340
CHA0040324
CHA0060324
CHA0020324
SAFETY CHAINS
Safety chains are required by law in most states. Cross chains when towing for added safety. Meets J684.6.3.4 SAE requirements.
Part No. Grade Size Hook Finish Capacity Description
30
TRAILER ACCESSORIES
QUICK LINKS
74602 74603 5/16" Quick Link - 5,000 lb. rating 1/4" Quick Link - 3,500 lb. rating Retail Packaged Retail Packaged
74602
74603
JC1000300
TDR0030324
TDR0040300
TDR0050300
TDR0070300
TDR0060300
* Raw with light oil and C-1045 material for weld-on application ** Bevel on the bottom of bracket for a great weld connection
TDR0020324
TDR0010340
31
TRAILER ACCESSORIES
TIRE CARRIERS
Easy bolt-on installation, no cutting or drilling required. Fits trailer tongue up to 3" wide by 5" high. All mounting hardware and instructions included.
Includes zinc-plated mounting hardware and instructions. Security locking hole to lock wheel and bracket to trailer using a security cable and lock (cable and lock sold separately).
Package Quantity
Includes lug nuts to secure wheel to frame. Heavy-duty 1/2" diameter construction. Zinc-plated to resist corrosion.
Package Quantity
ETC
ETCLB
ETCHL
Removable plug allows longer wheel studs to protrude through cap. Locking tab provides positive locking feature to prevent lock from turning.
Package Quantity
32
MARINE PRODUCTS
MARINE ACCESSORIES
MB1810 MB1820
Torsion Springs
*Max 4-stroke rating results from potential interference of motor hardware and tiller handle angle. Torsion Springs are not available as a service item. This type of repair needs to be done at factory. Contact the Cequent Service Department.
MOTOR SUPPORTS
Shock absorbing Kushion Kradle elements absorb road shock and vibration. Reinforced molded polyurethane V-block offers extra strength and durability. Model MBKRT comes with roller and trailer mount trailer mount can be easily removed for storage and theft prevention. Model MBR does not include Kushion Kradle feature.
Part No. Available Adjustment Kushion Kradle Feature
MOTOR SUPPORTS
MBKRT 0127 MBR 0127 20* - 27" 8* - 21" Yes No
*Cutting required for lengths shorter than maximum adjustment distance. Kushion Kradle models can be shortened to 10". This will require drilling additional holes. US Patent 4,828,186
33
MARINE ACCESSORIES
MARINE PRODUCTS
BOAT GUIDES
Boat guides help you visually guide your boat onto your trailer. High-strength super gripper mounting brackets attach firmly above and below the trailer frame. Easy bolt-on mounting fits trailer frames up to 3" x 5" high. Adjustable to provide optimum fit to any hull design.
Fulton Part No. Description / Size Upright Height
BOAT GUIDES
GB44 0101 GB150 0100 GB150 1140 BGR20 0101 Non-marring, marine grade PVC uprights Non-marring, marine grade PVC uprights Same as GB150 0100 but includes LB101 0101 light mounting bracket kit Galva-Tec finish, steel construction with non-marring, cushioned rollers 44" 50" 50" 20"
BGR20
GB150
GB44
LB1010101
34
MARINE PRODUCTS
MARINE ACCESSORIES
CANOE LOADER
Allows one person to quickly and easily load and unload a canoe or kayak on most vehicles. Quickly mounts to receiver with common hand tools (Includes tie-down cord). Free adapter bracket included, to allow use of receiver for trailering while using the Canoe Loader. Adjusts to fit cars, trucks, or sport utility vehicles.
Fulton Package Description
READY TO GO IN 30 SECONDS
CANOE LOADER
CC1 0127 Canoe Loader
10 Seconds
20 Seconds
30 Seconds
35
US Patent 6,050,546
Manufacturers and service shops agree: Storing a snowmobile with its track off the ground is good preventive maintenance. Now lifting a sled is simple to do and easy on your back. This snowmobile lift can raise your sled high and dry without all the grunt work. With a wide variety of snowmobiles in the marketplace, there is an infinite range of heights that snowmobiles have to be lifted to get the tracks off the ground. The Fulton snowmobile lift by Cequent Performance Products has 19" of travel, enough to lift the track of a long, two passenger touring sled off the ground.
WARNING
Do not stand behind or in front of snowmobile while track is moving. Stay away from moving track while snowmobile is supported by jack. Do not use too much throttle during warm-up or when track is free hanging. Severe personal injury or death may result from entanglement in the track or from flying debris. Snowmobile engine must be turned off to install or remove snowmobile from jack. Use jack to lift snowmobile by its bumper only. Bumper must be firmly seated in jack lift bracket. Only use jack on a flat level surface with the base firmly seated on the ground. Be sure track clears the ground before starting engine to avoid injury or track/snowmobile damage.
Lift Capacity
Handle Sytle
Part No.
Model No.
Travel
Description
TWL 150 X
19"
12"
31"
N/A
N/A
N/A
N/A
U-shape lift bracket with vinyl end caps. Powder-coated outer tube, zinc-plated inner tube with base, locking plate included. Guard sold separately. Guard kit
18.5
N/A
36
RAMPS
FULTON RAMPS
Loading ATVs, snowmobiles, and lawn equipment is easy with the full range of our loading ramps. Durable, lightweight welded aluminum construction resists corrosion and allows for convenient handling. Some models fold for storage. All ramps include adjustable attachment strap. Also available are Ramp Ends that conveniently turn your ordinary 2" x 8" or 2" x 12" lumber into a pair of loading ramps. Heavy-duty, zinc-plated steel construction. All necessary mounting hardware included. Kits available for top or bottom ends. The Ramp Ends have a 700 lb. distributed load capacity. See instruction sheet, included with product, for recommended length requirements.
Part No.
Ramp Style
Part No.
Style
Width
TOP
RAMP END 8" OR 12"
BOTTOM
37
SECURITY
Part No. Description
LOCKS
Part No. Description
TRAILER LOCKS
HLO 0101 HITCH LOCK Economical theft deterrent, solid cast lock body, fits all Fas-Lok and other standard couplers.
RECEIVER LOCKS
BPRL630600 RECEIVER LOCK Easy-to-use, push-button lock mechanism. Protective cap shields lock mechanism from road debris. Fits class III & IV, 2" square receivers.
BHLO 0600
HITCH LOCK Durable brass body, adjustable to fit most couplers, economical theft deterrent, lock adjustment up to 1.016".
US Patent D 470,473
RL50 0100 SHLO 0600 HITCH LOCK Rust-resistant stainless steel, adjustable to fit most couplers, economical theft deterrent, lock adjustment up to 1.016". RL63 0100
RL SERIES RECEIVER LOCK Plated steel pin. Heavy-duty cast lock body. Includes protective cover. Combo pack includes matching receiver lock and HLO (keyed alike). 1/2" diameter pin for 1-1/4" x 1-1/4" receivers. 5/8" diameter pin for 2" x 2" receivers.
5804010200 OPTIC RECEIVER LOCK (Bulk) Fits Class II, III and IV square 5804010600 receivers. Yellow body (Ind. Pkg.) increases visibility.
COUPLER LOCK Easy-to-use, push-button lock, heavy-duty cast construction, fits most couplers, die-cast steel barrel keys.
US Patent D350,054
Trailer protector for 1-7/8" couplers. Trailer protector for 2" couplers. Trailer protector for 2-5/16" couplers. OPTIC COUPLER LOCK Universal trailer coupler lock, durable cast body, will fit most 1-7/8", 2", and 2-5/16" couplers. Yellow body increases visibility.
US Patent 6,722,686
5806010200 OPTIC (Bulk) CABLE/RECEIVER LOCK 5806010600 15 feet long. Great for (Ind. Pkg.) bike racks. Yellow lock body increases visibility.
5804020600 RECEIVER / COUPLER LOCK COMBO Coupler lock wth durable brass body, adjustable to fit most couplers, economical theft deterrent, lock adjustment up to 1.016. Receiver lock fits Class II, III and IV square receivers. Yellow body on receiver lock increases visibilty.
38
LOCKS
Part No. Description Part No. Description
SECURITY
STL 0603
SPARE TIRE LOCK Fits over wheel studs (up to 9/16" diameter) to help deter theft. Removable plug allows longer wheel studs to protrude through cap, and locking tab provides positive locking feature to help prevent lock from turning.
Theft deterrent hardware system. Locks conveniently keyed alike in combo sets (ATVC). Provides maximum safety and security. Eliminates the need for straps and tie downs: saves time and money! Easier to store! Ratcheting adjustment: Small Lock - 4.5" range of adjustment; Long Lock - 11" range of adjustment. Specially designed for ATV use, also great for lawn tractors, golf carts, and other utility vehicles. All necessary mounting hardware included. ATVS 0100 ATVL 0100 ATVC 0100 Short lock, 4.5" range of adjustment. Long lock, 11" range of adjustment. Complete kit, front and rear.
MULTI-PURPOSE LOCKS
TK100 0100 TRAILER KEEPER LOCK Heavy-duty, hardened steel construction. Adjustable to fit most trailer wheels up to 15". Includes brass lock and key set.
CABLE LOCK High-strength, vinyl-coated steel cable. Heavy-duty locking body secures cable end. Coils easily for storage. 6 foot length cable lock. 15 foot length cable lock.
39
DOOR LOCKS
MOTOR HOME DOOR LOCKS L-300
Flush-mount lock requiring a 4 5/8" X 4 7/8" opening in a 1 3/8" to 2" thick door. Plate measures 5 1/4" X 5 3/8" outside and 5 1/4" X 5 7/16" inside. Recessed outside handle. The locking mechanism is actuated with outside key or inside safety catch. Load capabilities meet or exceed Federal Motor Vehicle Safety Standard 206.
Bargman Bulk Bargman Packaging Description
REPLACEMENT PARTS
10-30-690 14-30-690 Door Lock Cylinder & Keys for L-300 10-30-711 Door Lock Inside Assembly L-300 10-30-715 Door Lock Outside Assembly L-300 14-30-220 Safety Latch Pins 14-30-901 Door Lock Repair Kit L-300 (see page 44)
40
DOOR LOCKS
DOOR STRIKES
Die-cast door strike 1/4" deep to ensure full extension of latch bolt to keep door closed while traveling. Horizontal adjustment is 1/4" and may be mounted with 3/16" lip forward. Bolt opening is 1 1/4" X 9/16".
Bargman Bulk Bargman Packaging Description
DOOR STRIKES
10-10-810 Door Strike, Pocket Style
Die-cast strike plate for travel trailer lock only. Elongated mounting holes for easy adjustments. Bolt opening is 1 1/4" X 1/2".
DOOR STRIKES
10-30-181 Door Strike, Pocket Style
Motor home strike plate, heavy-duty metal stamping to be used with the L-300 only. Zinc plated and baked.
DOOR STRIKES
10-30-185 14-30-185 Door Strike, L-300
Die cast 1/8" thick metal strike with bolt opening of 1 3/8" X 9/16". Counter sunk screw holes.
DOOR STRIKES
10-66-810 Door Strike
Spring-hinged catch with 3" arm extension, hooks directly onto door. Bumper extension 1 3/8". Zinc plated.
Rubber cushion with counter sunk hole, suitable for use on metal or wood.
REPLACEMENT PARTS
70-14-110 Door Bumper Screw
41
DOOR LOCKS
NO. QTY. 1 1 2 1 3 2 4 1 5 1 6 1 7 1 8 2 9 1 10 1 11 1 12 1 13 4 14 1 15 4 16 1 17 1 18 1 19 1
DESCRIPTION Cylinder Guide Plate Screw #10-32 x 1 5/8" Latch Bolt Washer Cylinder Adapter Screw #6-32 x 1/4" Washer Cotter Pin Square Shank Washer Tension Spring Screw #10-32 x 1 1/4" Screw #8-32 x 3/8" Lock Lever Steel Ball Ball Spring Bolt Spring Latch Cam
ASSIST BARS
Zinc die cast assist bar with chrome plating or black powder coat and textured finish. Requires counter sunk screws. 10" X 7/8" X 1 5/8" Mounting holes on 9" centers.
Bargman Bulk Bargman Packaging Description
ASSIST BARS
70-33-301 70-33-302 Assist Bar, Chrome Assist Bar, Black
42
ACCESS DOORS
DOORS - ELECTRIC
Electric door with flange, rain deflector and full square opening, with door cutout for cord. Cutout: 6 3/4" X 6 3/4", Overall: 9 3/8" X 9 3/8"
Bargman Bulk Bargman Packaging Description
DOORS - ELECTRIC
60-10-001 60-10-002 60-10-006 60-10-090 60-10-092 60-10-093 64-10-093 64-10-090 Door - Electric Colonial White (EB350) Door - Electric Original White #2 (EB350) Door - Electric Soft White #3 (EB350) Lock 1.25 Clip Key CH751 - Set of 2 Lock 1.25 w/Clip & Key
REPLACEMENT PARTS
DOORS - ELECTRIC
Electric door with flange, rain deflector and full opening, with door cutout for cord. Cutout: 4 7/8" X 5 7/8", Overall: 7 5/8" X 6 1/2"
Bargman Bulk Bargman Packaging Description
DOORS - ELECTRIC
60-14-002 60-14-006 60-10-091 60-10-092 60-10-093 64-10-093 64-10-091 Door - Electric 30 Amp Original White #2 (EB390) Door - Electric 30 Amp Soft White #3 (EB390) Lock .675" Clip Key CH751 - Set of 2 Lock .675" w/Clip & Key
REPLACEMENT PARTS
REPLACEMENT PARTS
43
ACCESS DOORS
REPLACEMENT PARTS
REPLACEMENT PARTS
REPLACEMENT PARTS
44
WATER FILL
ACCESS DOORS
REPLACEMENT PARTS
REPLACEMENT PARTS
REPLACEMENT PARTS
45
ACCESS DOORS
REPLACEMENT PARTS
REPLACEMENT PARTS
REPLACEMENT PARTS
46
ACCESS DOORS
47
NEW SAE THE SAE INTERNATIONAL J2638 STANDARD STAN DARD FOR GOOSENECK AND 5TH WHEEL TRAILERS UNDER 30,000 LBS.
The Society of Automotive Engineers (SAE) is a non-profit educational and scientific organization dedicated to advancing mobility technology to better serve humanity. SAE has developed many standards, testing methods and procedures to measure the performance of vehicles and vehicle related products, including trailers. SAE J2638 addresses both gooseneck and 5th wheel trailers under 30,000 lbs. The testing methods for gooseneck are as follows: TESTING METHODS STATIC TESTING is a one time maximum load requirement for the three test conditions. The test is to be maintained for 5 Seconds. Vertical - tests the goosenecks ability with upward and downward pressure - 85% of GVW Pull Out (25K lb Gooseneck = 21,250 lbs) - 50% of GVW Down (25K lb Gooseneck = 12,500 lbs) Longitudinal - tests the goosenecks ability with front and back pressure - 75% of GVW Front and Back (25K lb Gooseneck = 18,750 lbs) Transverse - tests the goosenecks ability with side to side pressure - 30% of GVW Each Side (25K lb Gooseneck = 7,500 lbs) DYNAMIC TESTING defines requirements for repetitive testing in the three test conditions. 300,000 Cycles in each test condition. (Vertical, Longitudinal and Transverse) The same unit is used for all three tests. (900,000 Cycles all together) The range of load requirements are based on GVW and Rated Coupler Load. Longitudinal Transverse In order to assure safety and accountability for the products produced, SAE J2638 also requires: Product Identification - Manufacturers Name - Maximum Trailer GVW - Rated Vertical Coupler Load - Ball Size Testing - Products are to be fixtured at the maximum stress conditions - There should be no loss of attachment during testing - When testing is completed, the coupler will be capable of being uncoupled and coupled CEQUENT COMMITMENT As the leading manufacturer of gooseneck couplers, Cequent understands the importance of the new SAE standard for Goosenecks and 5th Wheels. We are committed to providing products that meet or exceed these recommendations and our commitment is evident by our investment in people and facilities dedicated to testing our products. Competitors 25K gooseneck fails longitudinal test at 11,500 lbs. In addition to being one of the only manufacturers with dedicated testing facilities, Cequent also has over 90 years of manufacturing experience to insure our products are of the highest quality and reliability. Because of the size of our organization we can provide the added benefits of high quality, unmatched reliability and proven strength, at a competitive price.
48
Vertical
NOTES
49
NOTES
50