Академический Документы
Профессиональный Документы
Культура Документы
HANDBOOK
03/04/11
1/33
1. Introduction.........................................................................................................3
2. Support Arrangement..........................................................................................4
3. Optimisation Team Structure..............................................................................5
4. Bad Perfromance FisH Bone diagram................................................................6
5. Information Preparation......................................................................................7
6. General Optimisation Proceedure......................................................................8
7. Alarm Analysis....................................................................................................9
8. Statistics Analysis Procedure...........................................................................10
9. Drive Test..........................................................................................................13
9.1. Drive Test Reminder..................................................................................13
9.2. Drive Test Log Investigation Consideration...............................................13
10. Frequeny Planning .........................................................................................14
10.1. BCCH and BSIC planning criteria............................................................14
10.2. Frequency Assignment Criteria................................................................14
10.3. Frequency Retune Procedure..................................................................15
11. Add Neighbor Criteria.....................................................................................15
12. High Rise Building Coverage..........................................................................16
13. Maximum System Configuration.....................................................................16
14. HDPC Setting Template.................................................................................18
14.1. TX Power and Power Control...................................................................18
14.2. Handover..................................................................................................21
14.3. Multiband..................................................................................................23
14.4. Miscellaneous...........................................................................................23
15. Tools Available................................................................................................25
16. Problem Root Cause ......................................................................................26
16.1. High SDCCH Blocking.............................................................................26
16.2. High TCH Blocking...................................................................................27
16.3. SDCCH Access Failure Rate...................................................................28
16.4. Handover Failure & Loss..........................................................................29
16.5. MSC Connection Rate ............................................................................30
16.6. SDCCH and TCH RF Loss.......................................................................31
16.7. Power Control...........................................................................................32
16.8. Handover Problem...................................................................................32
16.9. Others.......................................................................................................33
03/04/11
2/33
1. INTRODUCTION
Teamwork, listen to order, cycle time reduction and follow procedure are critical
to every successful optimisation.
Below is the optimisation flow chart:
Data Preparation
Data Collection
Data Analysis
Satisfactor
y Result?
No
Optimisation
Yes
Complete
03/04/11
3/33
2. SUPPORT ARRANGEMENT
Optimisation Flow
Monthly performance
meeting to identify
optimisation targets.
Account Team
supplies required
information
PEG prepares
INFORMATION FOR
OPTIMISTION
PEG derives
optimisation plan
Start optimisation
03/04/11
PEG Arrangement
PEG discuss with account
teams to identify optimisation
targets.
4/33
Alarm
Monitoring
Statistics
Monitoring
BSS
Controller
MONITORING
ACTION
Job Function
BSS Controller
- Understand fully on BTS maintenance, BSS configuration
Alarm Monitoring,
- Monitor daily alarm
Statistics Monitoring
- Investigate problem from statistics
D.B. & Feature Controller
- Check database and monitor feature deployment process
Drive Test Log Investigator
- Investigate problem from drive test log
03/04/11
5/33
Neighbor
Coverage
External
Calculation
Interference
Capacity
Frequency
Plan
Software
Hardware
Cable
Connection
Statistics Pegging
and Retrieval
Bad Performance
Network
Topology
Signaling
Mobile
Documentation
03/04/11
6/33
5. INFORMATION PREPARATION
03/04/11
7/33
1 day
2 days
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
Capacity
Hardware
03/04/11
2 days
2 days
Database,
Interference &
Capacity
Network
Topology
2 days
2 days
g.
8/33
12 days
7. ALARM ANALYSIS
Below lists some important alarms that we focus,
a. Critical and major alarm
b. Alarms affect voice quality like MSI, KSW, RXCDR, DRIM, DRI
c. GCLK affects HO
d. Link alarms affect site availability and voice quality
e. XBL alarm affects acknowledgement of OOS CIC
03/04/11
9/33
M
P
i n
e S s Dp
oC n C s He
C
M
S
( M
B
A
S
c c e
l l
s s
t u
ip h
( T S
c e
o s sT
s s
e n t T A C t Ht e
R O
M
_ M
O
e f u s e
F C a a i l ul l r S e u R c ea
D
C
A s s i g n m
_ R E Q
_ F
A
A
O
dT
e r M
o d e
F
M I , I M
S I )
st e s
t e
mR
S
i l
r o
e n t
t e
t e
Fp t L R o a s t s e
C )
lo c k in
s s ig n m
D
C
c t io
a
R
l l
Ha
tO e
t e
s s
t e
I n t e r - B
o s s
I n t r a - B
u c c e s s
o s s
I n t r a - c e ll
10/33
L o
s s
b.
c.
d.
e.
f.
g.
Special Request
For growth planning per cell on blocked call setup, we can use ALLOC_TCH_FAIL
HO_FAIL_NO_RESUORCES_INTRA_BSS - HO_FAIL_NO_RESUORCES_INTER_BSS HO_FAIL_NO_RESUORCES_INTRA_CELL to estimate expanded network total calls.
For coverage analysis and improve MSC connection rate, we can use per LAC
ACCESS_PER_RACH PAGING_RESPONSE. Difference tells us how many no page reponses.
03/04/11
11/33
03/04/11
12/33
9. DRIVE TEST
9.1.
i.
ii.
iii.
iv.
v.
vi.
vii.
9.2.
03/04/11
13/33
10.
FREQUENY PLANNING
serving cell
adjacent
channel
co-channel
serving cell
adjacent
channel
co-channel
03/04/11
14/33
11.
In general, LOS and 2nd Round Interferer will be added as neighbor; however, for
3rd Round, this is very network dependant. field knowledge is required to make
the decision.
serving cell
03/04/11
LOS interferer
2nd Round
Interferer
3rd Round
Interferer
15/33
12.
Introduce high rise building coverage must make sure to have good street
coverage.
Macro
Micro
High Rise Building provide high level (likely above 8th floor) high rise building
coverage
Macro provide low floors and street level coverage
Micro provide street level and indoor coverage
13.
03/04/11
16/33
03/04/11
17/33
14.
Current
Setting
Suggest
Setting
Reason
max_tx_ms
max_tx_bts
Downlink Power Control due to Level
Current
Suggest
Parameter
Setting
Setting
decision_alg_num
bts_power_control_all
owed
bts_p_con_ack
(TIMER)
bts_p_con_interval
(TIMER)
pow_inc_step_size
pow_red_step_size
rxlev_dl_pc, hreqave
rxlev_dl_pc, hreqt
decision_1_dl_rxlev_a
v_p
l_rxlev_dl_p
u_rxlev_dl_p
decision_1_n1
decision_1_p1
decision_1_n2
decision_1_p2
Downlink Power Control due to Quality
Current
Suggest
Setting
Setting
decision_alg_num
bts_power_control_all
owed
bts_p_con_ack
(TIMER)
bts_p_con_interval
(TIMER)
pow_inc_step_size
pow_red_step_size
rxqual_dl_pc, hreqave
rxqual_dl_pc, hreqt
rxqual_dl_pc,
qual_weight
decision_1_dl_rxqual_
av_p
l_rxqual_dl_p
u_rxqual_dl_p
decision_1_n3
decision_1_p3
decision_1_n4
decision_1_p4
w_qual
Parameter
03/04/11
Suggest
Setting
Reason
Reason
Reason
18/33
ms_power_control_all
owed
ms_p_con_ack
ms_p_con_interval
pow_inc_step_size
pow_red_step_size
rxlev_ul_pc, hreqave
rxlev_ul_pc, hreqt
decision_1_ul_rxlev_a
v_p
l_rxlev_ul_p
u_rxlev_ul_p
decision_1_n1
decision_1_p1
decision_1_n2
decision_1_p2
Uplink Power Control due to Quality
Current
Parameter
Setting
decision_alg_num
ms_power_control_all
owed
ms_p_con_ack
ms_p_con_interval
pow_inc_step_size
pow_red_step_size
rxqual_ul_pc, hreqave
rxqual_ul_pc, hreqt
rxqual_ul_pc,
qual_weight
decision_1_ul_rxqual_
av_p
l_rxqual_ul_p
u_rxqual_ul_p
decision_1_n3
decision_1_p3
decision_1_n4
decision_1_p4
w_qual
Suggest
Setting
Reason
Suggest
Setting
Reason
03/04/11
Suggest
Setting
Reason
19/33
Reason
Current
Setting
Suggest
Setting
Reason
rpd_pwr_down
rpd_period (TIMER)
rpd_trigger
rpd_offset
03/04/11
20/33
14.2. Handover
Inter-cell Handover
Parameter
Current
Setting
Suggest
Setting
Reason
Current
Setting
Suggest
Setting
Reason
Current
Setting
Suggest
Setting
Reason
inter_cell_handover_a
llowed
Intra-cell Handover
Parameter
intra_cell_handover_a
llowed
ho_ack (TIMER)
hop_count
hop_count_ timer
Uplink Quality
Parameter
ul_rxqual_ho_allowed
rxqual_ul_ho, hreqave
rxqual_ul_ho, hreqt
rxqual_ul_ho,
qual_weight
rxqual_ul_ho,
qual_pwr_flag
rxqual_ul_ho,
qual_margin
rxqual_ul_ho,
adj_qual_margin
decision_1_ul_rxqual_
av_h
l_rxqual_ul_h
u_rxqual_ul_h
decision_1_n6
decision_1_p6
w_qual
Uplink Interference
Parameter
Current
Setting
Suggest
Setting
Reason
Suggest
Setting
Reason
interfer_ho_allowed
rxlev_ul_ho, hreqave
rxlev_ul_ho, hreqt
rxlev_ul_ho,
qual_margin
rxlev_ul_ho,
adj_qual_margin
decision_1_ul_rxlev_
av_ih
u_rxlev_ul_ih
decision_1_n7
decision_1_p7
Downlink Quality
Parameter
Current
Setting
dl_rxqual_ho_allowed
rxqual_dl_ho, hreqave
rxqual_dl_ho, hreqt
rxqual_dl_ho,
qual_weight
rxqual_dl_ho,
qual_pwr_flag
rxqual_dl_ho,
03/04/11
21/33
qual_margin
rxqual_dl_ho,
adj_qual_margin
decision_1_dl_rxqual_
av_h
l_rxqual_dl_h
u_rxqual_dl_h
decision_1_n6
decision_1_p6
w_qual
Downlink Interference
Parameter
Current
Setting
Suggest
Setting
Reason
Current
Setting
Suggest
Setting
Reason
Current
Setting
Suggest
Setting
Reason
interfer_ho_allowed
rxlev_dl_ho, hreqave
rxlev_dl_ho, hreqt
rxlev_dl_ho,
qual_margin
rxlev_dl_ho,
adj_qual_margin
decision_1_dl_rxlev_
av_ih
u_rxlev_dl_ih
decision_1_n7
decision_1_p7
Uplink Level
Parameter
ul_rxlev_ho_allowed
rxlev_ul_ho, hreqave
rxlev_ul_ho, hreqt
decision_1_ul_rxlev_
av_h
l_rxlev_ul_h
u_rxlev_ul_h
deicion_1_n5
decision_1_p5
Downlink Level
Parameter
dl_rxlev_ho_allowed
rxlev_dl_ho, hreqave
rxlev_dl_ho, hreqt
decision_1_dl_rxlev_
av_h
l_rxlev_dl_h
u_rxlev_dl_h
decision_1_n5
decision_1_p5
Distance
Parameter
Current
Setting
Suggest
Setting
Reason
ms_distance_allowed
rel_tim_adv, hreqave
rel_tim_adv, hreqt
decision_1_tim_adv_av_a
lg
ms_max_range
decision_1_n8
decision_1_p8
03/04/11
22/33
poor_initial_assignment
timing_advance_period
(TIMER)
Power Budget
Parameter
Current
Setting
pwr_handover_allow
ed
rxlev_dl_ho, hreqave
rxlev_dl_ho, hreqt
surround_cell,
hreqave
decision_1_pbgt_rxl
ev_av_h
decision_1_ncell_rxl
ev_av_h_calc
max_tx_ms (serving
cell)
ms_tx_pwr_max_def
(internal neighbor
default)
ms_tx_pwr_max_cell
(external neighbor)
use_neighbor_pbgt_
hreqave
Suggest
Setting
Reason
Reason
14.3. Multiband
Multiband Handover
Current
Setting
Parameter
Suggest
Setting
Reason
mb_preference
phase2_classmark_
allowed
early_classmark_sending
early_classmark_delay
interband_ho_allowed
band_preference
band_preference_mode
multiband_reporting
14.4. Miscellaneous
Criteria 1
Parameter
Current
Setting
rxlev_min_def
rxlev_min_cell
Suggest
Setting
5
5
Reason
rxlev_min_def (internal neighbor default)
rxlev_min_cell (external neighbor)
Criteria 2
Parameter
ho_margin_def
03/04/11
Current
Setting
Suggest
Setting
4,5
Reason
23/33
Suggest
Setting
0
0
1
0
0
Reason
Reason
Quality Band Unit
Missing Report
Parameter
missing_rpt
Current
Setting
0
Suggest
Setting
0
Current
Setting
Suggest
Setting
Reason
Current
Setting
Suggest
Setting
Reason
Reason
Waiting for the actual data
Handover Timer
Parameter
handover_recongniz
ed_period
bssmap_t7
Link Disconnection
Parameter
radio_link_timeout
rr_t3109
link_about_to_fail
link_fail
full_pwr_rfloss
03/04/11
24/33
15.
TOOLS AVAILABLE
COP Event Counting Tool, Call Trace Product, Generic Look Up, Cell Analysis Tool 2
TEMS and Safco
K1103
Web Statisitcs
NetPlan
BSS Database
GEP
03/04/11
25/33
16.
BUSY_SD_MAX
=MAX CONFIGUREDSD
Find faulty TS
from BER stats
or check alarm
SD_MEAN_HOCDING
TIME CONVERGES to
T3101
Coverage Hole
Lot of location
Update?
END
Y
LAC BORDER REDESIGN
check t3121
Is out_INTRA_BSS_HO_RETURN AND
out_INTER_BSS_HO_RETURN A LOT?
N
END
Neighbor tx power
reduced
03/04/11
26/33
BUSY_TCH_MAX
=MAX_CONFIGURED_TCH
2. Missing Neighbor or
incorrect Neighbor BSIC
N
END
7. If SD has no blocking. May reconfigure
channels or enable channel
reconfiguration feature
Y
Find neighbors which has high
in_intra_bss_ho_return
in_inter_bss_ho_seize then
check its fp
N
Site reconfiguration
03/04/11
27/33
03/04/11
5. UL Interference
External check night line IOI
High cell site
High UL Path Loss
Co. or adj. channel interference
6. Excessive TA
28/33
5. HO Failure
- Incorrect External Neighbor
Database
2. Short rr_t3103
6. Handover_power_level is max?
03/04/11
3. MSC Problem
7. HO failure
- Check target cell fp
9. Radio Calibration
29/33
2. Coverage Hole
3. SD RF loss
4. TCH BLOCKING
7. Proper setting on
ms_txpwr_max_cch and
ms_txpwr_max_def
03/04/11
30/33
2. Hardware
(a)Path balance
-idea is 108; 120 (serious UL Path Loss)
; 100 (serious DL Path Loss)
(b)Radio
-check per carrier RF loss stats
(c) Neighbor cell outage
(d) GCLK SHIFT
Neighbor Blocking
-check (OUT_INTRA_BSS_HO_REQ_OUT_INTRA_BSS_HO_ATTEMPT)
or (OUT_INTER_BSS_REQ_TO_MSC_OUT_TNETER_BSS_HO_ATTEMPT)
and check neighbor s ALLOC_TCH_FAIL
8.
9. Is out_intra_bss_ho_return
and out_inter_bss_ho_return
a lot?
END
31/33
03/04/11
32/33
16.9. Others
Low Erlang Usage
1. Inappropriate C1, C2 and handover criteria
High Rxqual
1. Adjacent site interference
2. Same site MAIO assignment problem
3. High internal same site hit rate
4. External interference like cordless phone, alarm, BTS hardware
Undecode BSIC
1. GCLK shift
2. BCCH interfered
Spurious Coverage
1. Coverage optimization
2. TA control
Killed Paging
1. Too many access grant block reserved
2. Location area too large
No Paging After Mobile is on certain time period
1. MSC Location Update Timer < BSS Location Update Timer
No Call Setup
1. LACI is different between BSS and MSC
2. Cell BAR
Immediate Assignment Reject
1. NO SDCCH
03/04/11
33/33