Академический Документы
Профессиональный Документы
Культура Документы
101/8-10
-KBS
Maintenance-free Diaphragm valve lined and unlined
PN 10 DN 15 - 200 ND 1/2 - 8
with flanges
Fields of application
industrial applications power plants general industries chemical and industrial process engineering Suitable for abrasive and aggressive products such as water, drainwater, acids, caustic solution, sludge and suspension.
Materials
Body grey cast iron JL-1040 GJL-250 Bonnet grey cast iron JL-1040 GJL-250 Compressor grey cast iron JL-1040 GJL-250 Stem stainless steel 1.4104 Diaphragm EPDM Screws steel A2 Handwheel cast iron/plastic JL-1030/ABS
+140C
Operating data
- operating temperature range from -10C up to +140C - operating pressure range from vacuum up to 10 bar
Variants
Body Lining Body Coating Diaphragm Material all operating conditions. NR-H IIR PA ECTFE Ebonite Butyl Rilsan Halar +100C +120C +90C +90C +120C +90C +100C
Design
Soft sealing diaphragm valve, straight through type. Sealing in the passage and towards the outside by a diaphragm. Position indicator with integrated stem protection. DN 125 - 200 with threaded bush.
Specifications
valve - manufactured and tested EN 13397 - designated DIN/EN 19 (ISO 5209) flange - dimensions - surface face-to-face length
ASME B 16.5 - 1996 CL.150 DIN EN 1092-2 ( BS 4504)
(BS 5156)
1 - type ASME B 16.5 - 1996 Cl.150-FF 2 - PN DIN EN 1092-2 Form B (RF) 3 - DN EN 558-1 R7 (ISO 5752/7) 4 - working pressure EN 10204 2.2 EN 10204 3.1 EN 10204 3.1
Inspection
SISTO valves comply with the safety requirements of the Pressure Equipment Directive 97/23/EG, fluid group 1+2, modul H. SISTO valves have no own potential ignition source and can therefore, according to ATEX 94/9/EG, be used in hazardous locations of the group II, category 2 (zone 1+21) and category 3 (zone 2 +22)
-KBS
design
DN 015-100
Material
JL-1040/NRH JL-1040 1.4104 EPDM St A2E JS-1025 JL-1040 St A2E St A2E 9S20 PTFE/graphite springsteel ABS Luran ABS Luran A2-70 A2-70 A2 A2 springsteel JL-1030
Note
standard standard standard on DN 125 - 200 on DN 015 - 100 on DN 015 - 050 on DN 065 - 100 on DN 050 - 100 on DN 065 - 100
165 bonnet 200 stem 443* diaphragm 500 disc 544 threaded bush 553 compressor 554 disc 550 spliting disc 550.1 disc 550.2 bearing disc 560 pin 621.1 upper opening indicator 621.2 lower opening idicator 901 hexagon nut 902 stud 920 hexagon nut 920.1 hexagon nut 932 circlip 961 handwheel *recommended spare part material limitations
on DN 100 - 200 on DN 100 - 200 on DN 015 - 050 on DN 015 - 020 ABS 0570.821 8630.165
max. permissible operating pressure 10 pressure bar 8 6 4 2 DN 125 - 150 DN 015 - 100 DN 015 020 025 032 040 050
-40 -20 0 +20 +40 +60 +80 +100 +120 +140
-KBS
flow values Kv-value DN m/h 6,8 11,5 26,0 36,0 57,0 90,0 065 080 100 125 150 200 Kv-value m/h 166 227 410 616 1080 1879
DN 200
d
stroke
MD
nominal diaphragm face-to-face size MD length DN / A x B l** 015 020 025 032 040 050 065 080 100 125 150 200 70 x 46 70 x 46 86 x 67 86 x 67 86 x 67 111 x 86 136 x 108 169 x 134 198 230 285 337 108 117 127 146 159 190 216 254 305 356 406 521
flange- valve- height handwheel handwheel weight height diameter stroke turns D h* d approx. kg h1* 95 9 93 63 3 105 115 21 155 100 7 140 150 165 33 220 125 8 185 45 280 200 11 200 46 320 229 254 285 343 59 73 95 114 370 360 440 560 250 320 15 400 19 500 23 2,0 216 3,5 4,0 235 6,5 7,0 10,3 300 16,0 337 20,0 362 26,5 55,0 75,0 125,0 382 444 511 623
manual valve
h1
actuated valve
actuatorflanges F10
F10
F10/F14 F10/F14
all dimensions in mm * with rubber lining add. 5 mm ** with rubber lining add. 6 mm
-KBS
all moving parts are seperated from the medium by the diaphragm
opening idicator with integrated stem protection increases the reliability of operation
body on request - without lining - with rubber lining - with plastic coating
8651.101/8-10 / 08.07.2010