Академический Документы
Профессиональный Документы
Культура Документы
VESDA®
When Performance Counts
Product Guide
2000
A standard set of product configurations are described below. Model numbers and positions
are pre-configured for easy ordering. Adjustable sensitivity range is .005-20%/m Obs
VLP-000
VLP-400
LaserPLUS Detector with two blank plates and with all the
features of a standard Display module. The Display module is
mounted in the far right position.
VLP-002
VLP-012
Notes:
1. All detectors include a head termination card with 7 relays (HTC7) and a VESDAnet
socket.
socket
2. The blank plate in the far left position includes the VESDA logo.
logo
2
SCANNER (VLS) Detector Configurations
A standard set of product configurations are described below. Model numbers and positions are
pre-configured for easy ordering. Adjustable sensitivity range is .005-20%/m Obs
Notes:
1. All detectors include a head termination card with either 7 or 12 relays and a VESDAnet
socket.
socket
2. The blank plate in the far left position includes the VESDA logo.
logo
3. Scanner Detectors are almost identical to the look of the Standard VLP. However, the
Scanner Display includes an extra LED and the scan option.
option
COMPACT Detector Configurations
Programming:
Programming: The VN Version utilizes VESDA Laser
Programmers, Version 2.25 or later. Programmer configurations
include: Hand Held, Remote Mount, Rack Mount versions, or PC
Link HLI.
VLC-505
Programming:
Programming: The RO Version requires V-Config PRO Software,
Version 3.07 or later, and RO-Cable, P/N VSP-509 Cable. See
Spares and Accessories for Cable information.
VLC-500
4
Remote Mount Configuration (Single Box)
Programmer,
Programmer includes remote termination card. No relays.
VRT-100
VESDAnet Socket
VRT-300
5
Sub Rack Configurations
The VESDA Sub Rack can be configured thousands of different ways. For ease
of configuration, this guide includes a configuration worksheet. It can be
printed and used as required. NOTE: You are required to choose a module for
each of these four positions. The modules will be assembled in the
configuration you specify - from left to right. Position 1 is the far left position,
while Position 4 is the far right.
VSR-0000
IMPORTANT:
• The Sub-Rack mounts on any standard 19” rack . Sub-Rack Enclosures are also
available.
• Front and Back Modules are preconfigured on the following pages. However, if
you purchase spare modules it is important to note:
6
Configure Your Sub Rack
Pre-configured Examples:
7
Configuration Matrix
Use this matrix to configure each sub rack. Choose four modules per subrack. Your
finished part number will be VSR- XXXX (Replace X will the modules of choice
below)
P/N Digit Description of P/N Digit Qty
VSR - XXXX
0 Blank Plate
3 VESDAnet Socket
VLC
8
VESDA Laser Accessories
The PC- Link High Level Interface (PC-Link HLI) connects a PC and
VESDA LaserPLUS system. Each PC-Link HLI includes 2 cables (It does
not include a PC.):
- RS232 from HLI to PC Com port
- RS485 from HLI to VESDAnet Socket
VHX-0200 PC-Link HLI, Sliding Windows, RS232 Interface. (For VSM3 and V-
Config)
VHH-1000
9
Software
VSW-002 ASPIRE Pipe Modeling Software, Windows™ Based. Works with WIN
95, 98 and NT. Models LaserPLUS, LaserSCANNER and
LaserCOMPACT. (Imperial and Metric Options)
10
Spares & Accessories
for VESDA Laser Series
VRT-000 Remote Mounting Single Box with escutcheon only (Blank Plate and
Termination Card not included)
11
Spares & Accessories
for VESDA Laser Series, Cont’d
VSP-509 RO-Cable for use with Laser COMPACT Relay Only (RO) version. This cable is
required for Programming. V-Config Pro Software is also required.
12
Pipe and Point Labels
PIPE & FITTINGS For details of Pipe and Fittings available in your area please contact
your nearest authorised VESDA Distributor
Distributor,
E700-SPLR (Red)
E700-SPLG (Grey)
E700-SP-DCL
13
Warranty
14
For further information please contact:-
e-mail: apsales@products.vsl.com.au
Hong Kong/China
Phone: +852 9884 4999
Facsimile: +852 2430 3393
e-mail: kace.chiu@products.vsl.com.au
kevin.hui@products.vsl.com.au
Japan
Singapore
Phone: +65 9795 8111
e-mail: chiewbeng.tan@products.vsl.com.au
Taiwan
Phone: +886 227 841 669
Facsimile: +886 227 841 679
e-mail: kevin.chang@products.vsl.com.au
www.vesda.com
Vision Systems – VESDA
Private Bag 215, 495 Blackburn Road
Mount Waverley,VIC 3149 Australia
Ph: +61 3 9211 7200
Fax: +61 3 9211 7201
Freecall: 1800 700 203