Академический Документы
Профессиональный Документы
Культура Документы
Accurate machining and careful choice of components guarantee the product durability. The product range oers a great number of proposals even exclusive and has the right space / design solution for any room.
02/2011 ECLISSE, all rights reserved.-The use, filing and total or partial reproduction, using any mechanical or electronic means, of texts, drawings and pictures contained in this publication is strictly prohibited, unless specifically approved in writing by ECLISSE. 600003701
ECLISSE s.r.l. Via Sernaglia, 76 - 31053 Pieve di Soligo TV - ITALY Tel. +39 0438 980 513 - Fax +39 0438 980 804 international.sales@eclisse.it www.eclisseworld.com
www.eclisseworld.com
www.eclisseworld.com
ABOUT US ECLISSE
Eclisse began producing sliding pocket door systems in 1989 in its factory near Treviso in Italy and became an immediate success. This rapid success was based on highly innovative product design and advanced production techniques. Better products and better design quickly led to expansion throughout Europe where Eclisse has become the largest producer of these systems.
www.eclisseworld.com
www.eclisseworld.com
Its aim is to develop a construction technology characterized by innovation and excellence of quality standards. It took more than 30 patents to make Eclisse frames revolutionise the way we think about sliding door systems. Doors slide effortlessly inside the wall, opening up the room and dramatically changing your perception of space. Eclisse is a leading company in its sector in Italy and exports its products to the main European and world countries. With its more than 2000 customers located in all areas, Eclisse markets its products all over Europe and in the main non-European countries using a commercial network born in 1995 with the opening of the first sister company in Quimper, France. Same to this has done Poland, Austria, Czech Republic, Slovakia, Spain, Brasil, Germany and Romania. In all the other countries Eclisse is present with distributors and/or agents. If you require any further information contact us: Tel. +39 0438 980 513 Fax +39 0438 980 804 international.sales@eclisse.it
A l l p i c t u r e s a n d d r a w i n g s a r e f o r i l l u s t r a t i v e p u r p o s e s o n l y. E c l i s s e s . r. l . r e s e r v e s t h e right to make changes in order to improve the product specifications without notice. We may change the content of this catalogue, so if you have any queries related to the products you can contact our call center. Eclisse refuses any responsibility for misprints, clerical errors or for any other reason.
www.eclisseworld.com
This certificate proves that Eclisse runners have been independently tested to 100,000 open/ close cycles.
test in accordance with the European norm UNI EN 1527. After 100,000 opening and closing cycles (equal to 30 years of use) the runners showed no significant traces of wear or damage whatsoever. Strong shock resistance: an Eclisse sliding door system was left completely undamaged after passing the European recognised shock test (a 30 kg bag crashed into it from different heights in line with UNI EN 1629:2000 requirements) Anti-corrosion resistance:
Selfcentering guide
an Eclisse sliding door system showed no sign of rusting after 240 hours of salt spray test in a 95% humidity environment. C.S.I. Test. The fully extractable track is made from the more expensive aluminium alloy 6600 (UNI 9006:1) and protected by a 10 m anodic layer with a T5 thermic treatment. These facts show the importance Eclisse gives to quality and durability making its products to the highest possible quality level.
These are just a few of the patents Eclisse has obtained over the years. Eclisse has been the first to introduce into the market the motorized unit, the self-closing mechanism and many more useful and innovative solutions.
www.eclisseworld.com
SOLID WALL
16 horizontal reinforced bars hooked to plaster mesh give strength and rigidity, reducing the plaster flexes over the time. Their construction allows a perfectly spread plaster.
Mesh-CounteRFRame FiXinG sYstem without welDinG (Patented) To avoid rust and possible mesh detachment.
3 4
13
VERTICAL REINFORCED BARS Eclisse verticals are specially formed from 1.2 mm galvanised steel which greatly increases the strength and reduces flex. These are the strongest of their type on the market.
7
6
AliGnment baR (Patented) It allows a solid joint between the frame and the metal stop jamb during the installation. It guarantees a perfectly centred position. It comes standard with models UNICO, ending wall thickness 90, 108, 125, and 150 mm, and with model SYNTESIS LINE and SYNTESIS LINE double.
7 8 9
UnDeR FRame teaR-oFF pRoFile (Patented) To put quote mistakes right during the installation. It comes with models UNICO and EXTENSION, ending wall thickness 90, 108, 125, and 150 mm (model SIDERALE excluded)
DOOR GUIDE Quick and easy to fit to the frame with no holes to drill, this guide cleverly guarantees a perfectly centred position.
CEMENT PLASTERING DOES NOT FALL because it is hold by the knurl* thick mesh (25 x 50 mm) placed in between the plate and the edge of the cement plastering
10
polYstYRene Joint oveR the upRiGht It improves the strength against possible structural movements.
EXTRACTABLE TRACK SYSTEM (Patented) The Eclisse system has a patented extractable track which allows you to remove the complete running track at any time without having to break the wall.
11
MAINTENANCE FREE TRACK AND RUNNERS Four sealed, chrome steel ball bearings in an enclosed track so they cannot derail and give a smooth and reliable action; 80 kg max door weight, 120 kg on request.
PRotRuDinG close plasteR mesh (50X25) It joins the counterframe with the wall becoming an integral part of it, thus offering an increasing grasp of the plaster. The finished wall wont have faults.
12
TWO ADJUSTABLE DOOR STOPS The first doorstop is factory set to stop the door 70 mm from the edge of the pocket, the second is designed to lightly hold the door in the closed position to prevent bounce back.
MicRo-RibbeD FilleR plate A 0.7 mm micro-ribbed filler plate is embossed to increase rigidity and strength.
13
METAL STOP JAMB It reinforces the structure It comes with models UNICO, NOVANTA with ending wall thickness 90, 108 mm and UNILATERAL
www.eclisseworld.com
STUD WALL
5 6 7 The Eclisse system has a patented extractable track which allows you to remove the complete running track at any time without having to break the wall.
...easy assembly
The frame has been purposely designed to be assembled very quickly and simply by unskilled staff with just a screwdriver.
1
HORIZONTAL REINFORCED BARS Specially formed from 0.7 mm galvanised steel, these bars have a dovetail form which greatly increases the strength and reduces flex.
3
3
VERTICAL REINFORCED BARS Eclisse verticals are specially formed from 1.2 mm galvanised steel which greatly increases the strength and reduces flex. These are the strongest of their type on the market.
DOOR GUIDE Quick and easy to fit to the frame with no holes to drill, this guide cleverly guarantees a perfectly centred position.
METAL TRACK HOLDER This is better than wooden supports as it gives much more added strenght to the assembly.
MAINTENANCE FREE TRACK AND RUNNERS Four sealed, chrome steel ball bearings in an enclosed track so they cannot derail and give a smooth and reliable action; 80 kg max door weight, 120 kg on request.
TWO ADJUSTABLE DOOR STOPS The first doorstop is factory set to stop the door 70 mm from the edge of the pocket, the second is designed to lightly hold the door in the closed position to prevent bounce back.
Packaging for stud wall sliding door systems: 140 x 2310 x 110 mm for the kit. Starting from 640x2260x110 mm for the assembled version.
KIT ASSEMBLED
VERSATILITY (for stud wall only) The kit frame is extremely compact to store, taking up no more than 1 mt2. for 50 units! One kit can fit a finished wall thickness of 100mm and 125mm without any further parts. When specified the kit frame can be supplied fully assembled for both single and double doors.
www.eclisseworld.com
16
Profiles integrated structure Verticals, upright and stop jamb are precoated in the solid wall version and to be filled in the stud wall version; this makes them paintable with the same colour of the wall in which the pocket door will be used.
11
11
Vertical reinforced bars They improve the strength of the pocket door by more than 40% in comparison with the preceding profiles, thus the risk of bending is considerably reduced.
1
1 13 13
2
Counterframe SOLID WALL
10
10
Counterframe STUD WALL
12 15
12
Frontal stop door plate It offers a better design by hiding the frontal stop.
15
7. Protruding mesh The thick mesh (50x25 mm) and the special knurling improve the adhesion of the concrete to the metal sheet. The protruding mesh unifies metal and building structure.
13. Template for lock It offers the possibility to easily install the lock.
15. Under-door profile It improves the strength and the integrity of the pocket door.
Reinforced joint It guarantees linearity and a better linkage of track, frame and verticals.
17. Certified runners with ball bearings They guarantee long lasting, smooth and silent action. Standard door weights 80 Kg.
Rear bracket and self-centering door guide system (Italian patent pending) Inserting the door panel is way easier thanks to the combination of the rear bracket (picture A) and the self centering door guide, that does not require of being screwed on the floor (picture B).
8. Extractable track system (Patented) It is always possible to substitute worn mechanisms and to add accessories.
10. Horizontal reinforced bars 14 reinforced horizontal bars (12 for the stud wall version) made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage).
12. Alignment bar As it crosses the pocket door in all its width, it permits to solidly link the frame with the posts, thus making the assembly easier.
14. Thermoplastic transparent gasket Completely transparent, it improves the aesthetics of the verticals bars but also the functionality because the door panel leans gently thank to the resulting air cushion.
16. Adjustable rear door stop Lets you change the door passage size without removing the door panel.
18. Frontal stop It permits the frontal adjustment and offers a better closing.
10
www.eclisseworld.com
11
A REASONED CHOICE
When you use a hinged door...
Compared to conventional, hinged doors, sliding pocket doors offer advantages in every living space. It is estimated that in an average home, more than 8% extra space can be released by the use of sliding doors; thats 8 sq.mt. extra space in a 100 sq.mt. apartment! Eclisse have developed an elegant, practical alternative a framework that forms part of the wall and allows your doors to slide effortlessly inside the walls giving you more space. Sliding pocket doors take up no living space so whether you are designing new-build or refurbishment this is a modern, intelligent use of space using the very latest development in door closures. Eclisse only manufactures the frame so you can use any conventional door of your choice.
An extra
8m2
of space
www.eclisseworld.com
13
14
Eclisse SYNTESIS LINE Eclisse LUCE single Eclisse SINGLE
INTERIOR DESIGN
Eclisse DOUBLE
Eclisse UNILATERAL
www.eclisseworld.com
Eclisse NOVANTA Eclisse CIRCULAR double Eclisse TELESCOPIC double
15
Eclisse SINGLE
Sliding door systems for single doors
Eclisse DOUBLE
Sliding door systems for double doors
25
15
15
C A
15
25
C A B
15
150
15
C A
15
150
50
50
50
50
1920
1490
1060
285
175
195
195
25
C A B
15 90-108-125-150
15
C A
15 90-108-125-150
25
15
15
C A
175
285
1060
1490
H1
H1
H H1
H1
H H1
H H1
H1
1920
H H1
15
150
25
L C A
25
25
L C A
25
25
25
64
25
25
64
25
5 50
16
C A B
20
150
20
C A
20
150
50
H1
H H1
H1
H H1
H1
H1
H H1
25
C A B
C A
16
20
20
C A
20
100 - 125
100 - 125
25
25
58 - 83
12,5
25
25
58 - 83
12,5
150
25
25
64
12,5
25
25
64
12,5
150
150
50
H H1
Eclisse
Eclisse
Eclisse
16
www.eclisseworld.com
17
Eclisse
Warning: max. door thickness 40 mm when using frame having 54 mm internal space (including a possible pane holding profile) Max door weight 80 kg (120 kg on request) Possibility of made-to-measure dimensions
Warning: max. door thickness 40 mm when using frame having 54 mm internal space (including a possible pane holding profile) Max door weight 80 kg (120 kg on request) Possibility of made-to-measure dimensions
Warning: We recommend to install a door panel with 43 mm maximum thickness (including a possible pane holding profile) Max depth of box 40 mm (2 boxes are supplied) Max door weight 80 kg (120 kg on request) Possibility of made-to-measure dimensions
Warning: We recommend to install a door panel with 43 mm maximum thickness (including a possible pane holding profile) Max depth of box 40 mm (2 boxes are supplied) Max door weight 80 kg (120 kg on request) Possibility of made-to-measure dimensions
Notes
Notes
LUCE double
LUCE single
DOUBLE
SINGLE
50
50
H1
HP
H H1
H1
HP
H H1
H1
HP
H H1
H1
HP
H H1
50
C A
50
108 - 125 - 150
C A B
100 - 125 - 150
C A
B
100 - 125 - 150
LP
54
LP
54
LP
54
12,5
LP
54
12,5
40
20 20
200 20
N.B.: The door panel for SYNTESIS LINE must be milled along the upper and lower profiles, as shown in the drawings (milling not require on all-glass doors)
40
20 20
200 20
N.B.: The door panel for SYNTESIS LINE must be milled along the upper and lower profiles, as shown in the drawings (milling not require on all-glass doors)
DOOR PANEL
LP 615 715 815 915 1015 HP 1992/2092 1992/2092 1992/2092 1992/2092 1992/2092
DOOR PANEL
LP 615 715 815 915 1015 HP 1992/2092 1992/2092 1992/2092 1992/2092 1992/2092
DOOR PANEL
LP 615 715 815 915 1015 HP 1992/2092 1992/2092 1992/2092 1992/2092 1992/2092
double
SYNTESIS LINE
SYNTESIS LINE
SYNTESIS LINE
Out of standard: Its possible to produce pocket doors with width from 600 mm to 1300 mm and height from 1000 mm to 2700 mm. Warning The passage A is 7 mm reduced. Mandatory ending thickness 125, 150 mm for A more than 1000 mm for any heights. Max door thickness 40 mm (including any aluminum frames). Standard doors weight is 80 kg. Notes
Out of standard: Its possible to produce pocket doors with width from 1200 mm to 2600 mm and height from 1000 mm to 2700 mm. Warning
The passage A is 14 mm reduced. Mandatory ending thickness 125, 150 mm for A more than 2000 mm for any
Out of standard: Its possible to produce pocket doors with width from 600 mm to 1300 mm and height from 1000 mm to 2700 mm. Warning The passage A is 7 mm reduced. Mandatory ending thickness 125, 150 mm for H starting from 2150 mm; A more than 1000 mm for any heights. Max door thickness 40 mm (including any aluminum frames). Standard doors weight is 80 kg. Notes
Out of standard: Its possible to produce pocket doors with width from 1200 mm to 2600 mm and height from 1000 mm to 2700 mm. Warning The passage A is 7 mm reduced. Mandatory ending thickness 125, 150 mm for H starting from 2150 mm; A more than 2000 mm for any heights. Max door thickness 40 mm (including any aluminum frames). Standard doors weight is 80 kg.
heights. Max door thickness 40 mm (including any aluminum frames). Standard doors weight is 80 kg.
Warning
Because of production needs and safety reasons of the system, Eclisse expects that the door panel is left protruding 80 mm.
Warning
Because of production needs and safety reasons of the system, Eclisse expects that the door panel is left protruding 80 mm.
Eclisse
Eclisse
Eclisse
If needed, the adjustable rear stop door allows to modify the real passage size. In order to make the door completely disappear a passing routing is required. The routing for the door guide must have the following dimensions: 7 x 15 mm.
If needed, the adjustable rear stop door allows to modify the real passage size. In order to make the door completely disappear a passing routing is required. The routing for the door guide must have the following dimensions: 7 x 15 mm.
18
www.eclisseworld.com
19
Eclisse
SYNTESIS LINE
double
Left
Right
25
15
180
15 B
C A
125
B 15 180
125
H1
50
H H1
H1
H H1
H H1
50
H H1
25
15
15
C A
15
30
30
30
30
72
180
72
180
L A
C
125
L
125
B
R
A C
25
25
144
25
25
144
16
C B
22
180
22
C A
22
180
50
50
H1
H1
H H1
H H1
1200
1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 2000 x 2000/2100 1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 2000 x 2000/2100 1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 2000 x 2000/2100 1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 2000 x 2000/2100 1200 x 2000/2100 1400 x 2000/2100 1600 x 2000/2100 1800 x 2000/2100 2000 x 2000/2100
2115 x 2158/2258 2265 x 2158/2258 2295 x 2158/2258 2180 x 2158/2258 2180 x 2158/2258 2345 x 2158/2258 2460 x 2158/2258 2455 x 2158/2258 2320 x 2158/2258 2300 x 2158/2258 2520 x 2158/2258 2730 x 2158/2258 2835 x 2158/2258 2875 x 2158/2258 2330 x 2158/2258 2660 x 2158/2258 2885 x 2158/2258 3065 x 2158/2258 3225 x 2158/2258 2355 x 2158/2258 2685 x 2158/2258 2930 x 2158/2258 3135 x 2158/2258 3325 x 2158/2258 2385 x 2158/2258 2760 x 2158/2258 3030 x 2158/2258 3275 x 2158/2258 3480 x 2158/2258
1260 1460 1660 1860 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060
665 800 930 1055 670 760 895 1025 1150 680 770 910 1000 1130 640 780 870 965 1100 640 780 875 970 1105 645 785 880 975 1070
2115 x 2158/2258 2265 x 2158/2258 2295 x 2158/2258 2180 x 2158/2258 2180 x 2158/2258 2345 x 2158/2258 2460 x 2158/2258 2455 x 2158/2258 2320 x 2158/2258 2300 x 2158/2258 2520 x 2158/2258 2730 x 2158/2258 2835 x 2158/2258 2875 x 2158/2258 2330 x 2158/2258 2660 x 2158/2258 2885 x 2158/2258 3065 x 2158/2258 3225 x 2158/2258 2355 x 2158/2258 2685 x 2158/2258 2930 x 2158/2258 3135 x 2158/2258 3325 x 2158/2258 2385 x 2158/2258 2760 x 2158/2258 3030 x 2158/2258 3275 x 2158/2258 3480 x 2158/2258
1260 1460 1660 1860 1260 1460 1660 1860 2060 1260 1460 1660 1660 2060 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060 1260 1460 1660 1860 2060
665 800 930 1055 670 760 895 1025 1150 680 770 910 1000 1130 640 780 870 965 1100 640 780 875 70 1105 645 785 880 975 1070
16
22
22
C A
22
180
180
25
25
25
134
12,5
25
134
12,5
TELESCOPIC double
TELESCOPIC single
Overall Dimensions C x H1 1853 x 2085/2185 2153 x 2085/2185 2453 x 2085/2185 2753 x 2085/2185 3053 x 2085/2185 3353 x 2085/2185 3653 x 2085/2185
Max. Passage Size L x H 2300 x 2000/2100 2700 x 2000/2100 3100 x 2000/2100 3500 x 2000/2100 3900 x 2000/2100 4300 x 2000/2100 4700 x 2000/2100
Overall Dimensions C x H1 A B 3630 x 2090/2190 2350 625 4230 x 2090/2190 2750 725 4830 x 2090/2190 3150 825 5430 x 2090/2190 3550 925 6030 x 2090/2190 3950 1025 6630 x 2090/2190 4350 1125 7230 x 2090/2190 4750 1225
Overall Dimensions C x H1 3644 x 2085/2185 4244 x 2085/2185 4844 x 2085/2185 5444 x 2085/2185 6044 x 2085/2185 6644 x 2085/2185 7244 x 2085/2185
Eclisse
20
Notes
www.eclisseworld.com
21
Eclisse
Eclisse
Eclisse
Warning: We recommend to install a door panel with 43 mm maximum thickness (including a possible pane holding profile) When fully open, the doors will protrude slightly from the frame/jambs. Max door weight 80 kg.
Warning: We recommend to install a door panel with 43 mm maximum thickness (including a possible pane holding profile) When fully open, the doors will protrude slightly from the frame/jambs. Max door weight 80 kg.
Notes
CIRCULAR double
CIRCULAR single
Eclisse UNILATERAL
Sliding door systems for 2 doors side by side
Note: always state opening direction of door
Eclisse NOVANTA
Sliding door systems for sectional sliding doors
ACCESSORIES
EXTERNAL WALL SLIDING KIT
Right
A B
38 A C B A 38 200
Left
25
15
50
50
H1 H H1
H1
H H1
13
25
72
C B
25
25 13
25
A L
C 25
15
P1
P2
Eclisse supplies only the metal components (track, runners, brackets, door-stops, door-guide and rail mounting brackets).
Components Sectional view
200
54 - 72 - 89 - 114
72
25
25
25
C B
25
175
25
20
100 - 125
50
50
1 2
Aluminum running track 2000mm long Nr. 4 medium nuts M5 znb Nr. 4 washers M5 znb Nr. 4 screws TPSEI M5 x 16 znb Nr. 2 runners Nr. 2 high nuts M8 znb Nr. 2 low nuts M8 znb Nr. 2 washers M8 znb Nr. 2 screws M8 x 45 znb Nr. 8 screws M4,5 x 25 znb Nr. 2 door panel brackets Nr. 2 movable door stoppers Nr. 2 crinkle washers anti-slipping Nr. 2 screws M6 x 30 Nr. 1 doorguide Nr. 2 brackets for fixing track 13 14 15 11 12 1 2 3 4 5 6 7 8 9 10
2852
H1 H H1
H1 H H1
3 4
16
25
C B
25
100 - 125
54
25
25
A L
C 25
P1
20
5 6
12,5
2 3 4 1 9 11 5 7 8
175
7
P2
54 - 79
54
8 9 10 11 12
25
25
12,5
Frames for 2 doors side by side Standard model for SOLID WALL
Max. Passage Size L x H 600+600 x 2000/2100 650+650 x 2000/2100 700+700 x 2000/2100 750+750 x 2000/2100 800+800 x 2000/2100 850+850 x 2000/2100 900+900 x 2000/2100 950+950 x 2000/2100 1000+1000 x 2000/2100 Overall Dimensions C x H1 A B 2026 x 2090/2190 650 650 2226 x 2090/2190 700 750 2326 x 2090/2190 750 750 2526 x 2090/2190 800 850 2626 x 2090/2190 850 850 2826 x 2090/2190 900 950 2926 x 2090/2190 950 950 3126 x 2090/2190 1000 1050 3226 x 2090/2190 1050 1050
UNILATERAL
NOVANTA
13 14 15 16
16
Warning: max. door thickness 40 mm when using frame having 54 mm internal space (including a possible pane holding profile) Max door weight 80 kg (120 kg on request) Possibility of made-to-measure dimensions
Warning: max. door thickness 40 mm when using frame having 54 mm internal space (including a possible pane holding profile) Max door weight 80 kg. Possibility of made-to-measure dimensions
Eclisse
22
Eclisse
Notes
www.eclisseworld.com
23
ACCESSORIES
MOTORIZED SINGLE or DOUBLE
Unique on the market, this electronic device is contained within the framework and it is not visible externally. It performs a fast opening but a soft closing movement. (simultaneously when double door). The system is supplied with the motor already mounted onto the track, an electronic circuit board with micro switches and a power transformer. Its speed is self adjusting based on passage dimensions and doors weight. In case of blackout, after 10 seconds the door can be open/close manually.
The motorisation is easy to install any time. The motor is mounted on the track which itself is extractable. Free choice as far as jambs and trims.
ACCESSORIES
DOUBLE DOOR CO-ORDINATION
It can be installed on DOUBLE, LUCE double. It Allows the simultaneous opening and closing of the doors moving only one of them. You get a convenient and comfortable movement. Thanks to the removable track, is also applicable thereafter to pocket door already installed. It can be installed on all double systems with passage size from 600+600 mm to 1000+1000 mm. On 25+25 weight door frames the system slows down the closing movement and closes the doors. On over 25+25 kg weight (max 50+50 kg) door frames, the system slows only down the closing movement. Only for wooden doors. Ideal for living rooms, meeting rooms... Including Rallenty Soft. Note: on the counterframes with passage size 600+600 door frames stick out from the Jambs.
-o co
rdinate
op e
n and clos
The Eclisse motorised unit is suitable for: models UNICO, DOUBLE, LUCE single and double, UNILATERAL, with max clearance of mm 1500 and H 2400 mm. sliding systems with 100 mm or more finished thickness the door weight limit is 70 kg, either for wooden or glass panels Home automation systems
Important: When inserting in a sliding systems already installed, the door passage will decrease of 80 mm
RALLENTY SOFT
A futuristic addition for any Eclisse SINGLE, DOUBLE (1), LUCE single, LUCE double (1), TELESCOPIC single (2), TELESCOPIC double (1)(2), UNILATERAL. Just slide the door towards its closed position and at a certain point the door/s takes over and softly closes itself/themselves. It really is as simple as that! Useful, easy to use and increased safety from trapped fingers, once you used it there is no substitute. Can be installed retrospectively on existing Eclisse systems. Rallenty Soft is available in 3 versions: Rallenty Soft with self-closing system, Rallenty Soft for door panels up to 40 kg. and Rallenty Soft for door panels heavier than 40 kg.
y
closes
ce opened on
lo wly
tl and sof
cl
ose
s by it
(1) Systems that need two rallenty soft, one per each door frame, on TELESCOPIC system, only one rallenty soft for synchronization system. (2) On 25+25 weight door frames the system slows down the closing movement . and closes the doors. On over 25+25 kg weight (max 50+50 kg) door frames, the system slows only down the closing movement. Only for wooden doors.
24
lf
it
se
www.eclisseworld.com
25
ACCESSORIES
TELESCOPIC SyNchroNisatioN
It can be installed on TELESCOPIC single and TELESCOPIC double*, it allows the simultaneous movement of door frames which slide on the same direction. It is installed directly on the door (no need to change the tracks), and it can be applied to telescopic systems from 600+600 mm to 1200+1200 mm. Max door weight 80 kg. Ideal for living rooms, terraces, meeting rooms... The synchronisation system ensures that the two doors slide smoothly together in the same direction, therefore very safely. With the new synchronisation system the doors are connected and work together in a smooth action. The first door hitches on the second one right away and the two panels slide together without jerking or rebound inherent in the old-style systems. Rallenty Soft system matchable. On 25+25 weight door frames the system slows down the closing movement and closes the doors. On over 25+25 kg weight (max 50+50 kg) door frames, the system slows only down the closing movement.
ACCESSORIES
BrackEt / ClamP - StaNDs For all glass Doors
Fastening systems to be applied to all glass doors.
u im
ltaneou
pe
n in g door
The advantages offered by the Under Door Profile are an improved sliding action, an increased wear resistance and protection against deformation due to humidity.
9.7
DOUBLE JUNCTION
It is an universal accessory that permits to change two single frames in a double one. Available for Unico SD and Luce SD. Available for stud and solid wall version and for different sizes (max. clearance mm1000+1000). Differently from the normal DD models, passage clearance increase of 50 mm.
Warning When assembling a double door by using the Eclisse joining kit accessory, door passage (clearance) will increase of 5 cm compared to traditional estensione model. The compensation profiles are to be used in order to decrease that width difference to install standard door panels and jambs. The packaging includes 8 wooden pieces (1000*20 mm each) to be applied on the front systems.
17
Bracket
Standard with Eclisse all glass doors Max door panel weight 80 kg Dimensions: L 100 x H35 x thickness 26 mm Glass thickness 10 mm
Clamp
Max door panel weight 100 kg Dimensions: L 145 x H 45 x Thickness 27 mm Glass thickness 8 or 10 mm Available in rough finish, chrome matt
When fully open, the doors will protrude slightly from the frame/jambs.
N.B.: for the installation two dovetail incisions are required N.B.: it is applied directly on the glass without any previous processing.
Picture 1
Picture 2
For Double doors model its required the purchase of two Vitro Vitro is feasible only with all-glass door panel with max thickness 10 mm. Applications in glass fusing are not allowed.
26
www.eclisseworld.com
27