Академический Документы
Профессиональный Документы
Культура Документы
CIRCUIT DESCRIPTION
The seat position airbag sensor circuit consists of the airbag sensor assy center and the seat position airbag
sensor.
DTC B1153/25 is recorded when a malfunction is detected in the seat position airbag sensor circuit.
DTC No. DTC Detecting Condition Trouble Area
Open circuit in LSP+ wire harness or LSP- wire harness
of seat position airbag sensor
Short circuit in seat position airbag sensor wire harness
Seat position airbag sensor
(to ground)
B1153/25 Airbag sensor assy center
Short circuit in seat position airbag sensor wire harness
Floor wire No.2
(to B+)
Seat position airbag sensor malfunction
Airbag sensor assy center malfunction
WIRING DIAGRAM
B19
Seat Position Airbag Sensor (Driver’s Side) Airbag Sensor Assy Center
3 4
W
VS A16 A16 LSP+
2
(*2) (*1)
8 3
B A16 A16 LSP-
GND
4
(*2) (*1)
INSPECTION PROCEDURE
1 CHECK DTC
(a) Turn the ignition switch to the ON position, and wait for at
least 60 seconds.
Seat
(b) Clear the DTCs stored in memory (see page 05-1215 ).
Position
Airbag Airbag (c) Turn the ignition switch to the LOCK position.
Sensor Sensor (d) Turn the ignition switch to the ON position and wait for at
Assy least 60 seconds.
Center (e) Check the DTCs (see page 05-1215 ).
DLC3 OK:
DTC B1153/25
DTC B1153/25 is not output.
HINT:
Codes other than code B1153/25 may be output at this time, but
they are not related to this check.
CG TC
H01007
H10600 C91522 H42468
NG Go to step 2
OK
OK
OK
OK
OK
OK
OK
OK
END