Вы находитесь на странице: 1из 4

Characteristics

Zelio Time industrial timing relays


Optimum single-function relays, relay output, width 22.5 mm

Presentation
The RE8 range of relays is designed for simple and repetitive applications, providing basic functions. Each relay comprises: - a single timing range, - a C/O output relay.
560953

2
Environment
Conforming to standards Product certifications marking Ambient air temperature around the device

These products have a transparent, hinged flap on their front face to avoid any accidental alteration of the settings. This flap can be directly sealed.

12

Permissible relative humidity range Vibration resistance Shock resistance Degree of protection Degree of pollution Overvoltage category Rated insulation voltage Test voltage for insulation tests Voltage limits Frequency limits Disconnection value Mounting position without derating Connection maximum c.s.a. Tightening torque Electrostatic discharge Electromagnetic fields Fast transients Shock waves Radiated and conducted emissions

Storage Operation Conforming to IEC 60721-3-3 Conforming to IEC 60068-2-6, 10 to 55 Hz Conforming to IEC 60068-2-27 Casing Terminals Conforming to IEC 60664-1 Conforming to IEC 60664-1 Conforming to IEC Conforming to CSA Dielectric test Shock wave Power supply circuit Power supply circuit Power supply circuit In relation to normal vertical mounting plane Flexible cable without cable end Flexible cable with cable end

C C

IEC 61812-1. EN 61812-1 CSA, GL pending. UL Zelio Time timing relays conform to European regulations relating to - 40+ 85 - 20+ 60 1585 % Environmental class 3K3 a = 0.35 ms 15 gn - 11 ms IP 50 IP 20 3 III 250 300 2.5 4.8 0.91.1 Uc 50/60 5 % > 0.1 Uc Any position 2 x 2.5 2 x 1.5 0.61.1 Level 3 (6 kV contact, 8 kV air) Level 3 (10 V/m) Level 3 (2 kV) Level 3 (2 kV) Group 1 class A Class A

4 marking

V V kV kV Hz

mm2 mm2 N.m

Immunity to electromagnetic interference (EMC) (application class 2 conforming to EN 61812-1)


Conforming to IEC 61000-4-2 Conforming to IEC 61000-4-3 Conforming to IEC 61000-4-4 Conforming to IEC 61000-4-5 CISPR11 CISPR22

Consumption
Consumption RE8-TA, RA, CL, PE, PU, PT RE8-YG, RB RE8-YA VA VA VA

24 V 0.7 0.9 0.9

110 V 1.8 2.5 2.5

240 V 8.5 13 13

380 V 8

415 V 9

1
W W W

24 V 0.5 0.5 0.7

References : pages 2/44 to 2/47

Dimensions : pages 2/44 and 2/46

Schemes : page 2/45

2/42

Characteristics (continued)

Zelio Time industrial timing relays


Optimum single-function relays, relay output, width 22.5 mm

Timing characteristics
Setting accuracy Repeat accuracy Influence of voltage Influence of temperature Immunity to microbreaks Minimum control pulse Reset time As % of the full-scale value In the voltage range, 0.91.1 Un ms ms ms V A A A 20 % <1 % < 2.5 % < 0.2 %/C 3 26 (except RE8-YG: 60) 50

Output circuit characteristics


Maximum switching voltage Mechanical durability In millions of operating cycles Current limit Ith Rated operational limits at 70 C Conforming to IEC 60947-5-1/1991 AC-15 and VDE 0660 DC-13 Minimum switching capacity Contact material

6 250

2
115 V 3 0.2 250 V 3 0.1

20 8 24 V 3 2 12 V/10 mA 90/10 nickel silver Supply voltage < 10 50 2-wire sensors

Remote control input characteristics


Signal delivered by control input Y1 No galvanic insulation between this input and the supply No-load voltage Switching current Maximum distance Compatibility mA m

1 with leakage current < 1 mA


d.c. load Load limit curve

a.c. load Curve 1 Electrical durability of contacts on resistive load in millions of operating cycles
Millions of operating cycles

Curve 2 Reduction factor k for inductive loads (applies to values taken from durability curve 1)
Reduction factor k

10

1 0,9 0,8 0,7 0,6 0,5

Voltage in V

300 200

100

3 2 1

0,1 0,4

50 40 30 20

A
0,01 0,3 0 1 2 3 4 5 6 7 8 Current broken in A 1 0,8 0,6 0,5 0,4 0,3 Power factor on breaking (cos ) 0,2 10 0,1 0,2 0,5 1 2

A
5

A RE8-RB

55BUTQ

A 1 2 3

RE8-RB BUTQ L/R = 20 ms L/R with load protection diode Resistive load

55

10 20 Current in A

Example: An LC1-F185 contactor supplied with 115 V/50 Hz for a consumption of 55 VA or a current consumption equal to 0.1 A and cos = 0.3. For 0.1 A, curve 1 indicates a durability of approximately 1.5 million operating cycles. As the load is inductive, it is necessary to apply a reduction coefficient k to this number of cycles as indicated by curve 2. For cos = 0.3: k = 0.6 The electrical durability therefore becomes: 1.5 106 operating cycles x 0.6 = 900 000 operating cycles.

+
RE8

References : pages 2/44 to 2/47

Dimensions : pages 2/44 and 2/46

Schemes : page 2/45

2/43

Functions, references, dimensions, schemes


Output 1 C/O contact Single timing range

Zelio Time industrial timing relays


Single-function relays, optimum, relay output, width 22.5 mm
2

Function diagrams
Function A Delay on energisation Function C Timing after opening of control contact

U C T R T

Unit references (Sold in packs of 10)


560954 560954

Functions Voltages

Timing ranges

13or 2 24 V 23110240 V 2 380415 V


0.05 s0.5 s 0.1 s3 s 0.1 s10 s 0.3 s30 s 3 s300 s 20 s30 min

5 5

Weight (kg)

RE8 TA61BUTQ RE8 TA11BUTQ RE8 TA31BUTQ RE8 TA21BUTQ RE8 TA41BUTQ 0.110

RE8 RA11BTQ RE8 RA31BTQ RE8 RA21BTQ 0.110

5
RE8 RA11FUTQ RE8 RA31FUTQ RE8 RA21FUTQ RE8 RA41FUTQ 0.110

Dimensions
Dimensions
Rail mounting Screw fixing

80
6 78

89,5 82

22,5

Characteristics : pages 2/42 and 2/43

Schemes : page 2/45

2/44

78

Function K Delay on de-energisation (without auxiliary supply)


> 80 ms (1)

Function D Symmetrical flashing, start with output in rest position

U R T

U R T T T T T T

(1) If the device has been stored, de-energised, for more than a month, it must be energised for about 15 seconds in order to activate it. Subsequently, it only takes 80 ms to start the time delay. If this time is not complied with, the relay remains energised indefinitely.

560954

560954

5 5
RE8 RB51BUTQ RE8 RB11BUTQ RE8 RB31BUTQ 0.110

5 5
RE8 CL11BUTQ 0.110

Schemes
Connection schemes
RE8 TA, CL
A1
B1 A2

Recommended application schemes


RE8 RA RE8 RB
15 Y1
15

RE8 TA, CL
15 B1
15

RE8 RA

15
15

B1

A1
A2

A1
B1 A2

start

A1

A1

16

18

A1

16

18

16

18

B1 A1

A2 A2

A1 Y1

18

16

A2

18

16

A2

18

16

A2

Control of several relays with a single external control contact


RE8 RA, RE8 PD

Connection of a

1 2-wire sensor
If

+
A1 A2 Y1 A1 A2 Y1 A1 A2 Y1
C A1 A2

Y1

The external control contact C may be an electronic control device, for example a 2-wire sensor. In this case A1-A2 = 1 24 V and the control device can only control up to a maximum of 4 relays. Leakage current (open state) If < 1 mA.

Characteristics : pages 2/42 and 2/43

Dimensions : page 2/44

2/45

Вам также может понравиться