Академический Документы
Профессиональный Документы
Культура Документы
Civil Works Dismantling of Brick masonry Dismantling of steel window Excavation for foundation Bead urinal area PCC M10 For Flooring
CUM No CUM
1 1
0.25
0.9
0.23 1.00
6.20
0.50
0.45
1.90
0.10
6.20
0.50
0.45
1.40 1.40
Block work in CM 1:6 Bead urinal area Wall Less Total CUM
1 1 -2 -1 SQM
16
Cleaning the surface, removing all dust, dirt, oil, cement mortar etc. and applying paint. b) Water proofing paint two coats over a coat of primer.
17
Floor Tiling Fixing floor tile using supplied ceramic tiles laid on CM 1:3, 12mm thk plaster coat over a base coat of cement plaster 1:6, 12 to 20mm thk, suitable roughened, including cement slurry and pointing of joints with white cement mixed with necessary pigment to match, SFT curing. Rates includes cutting tiles for fixing switches, fittings, including matching colour PVC beading at the junctions of the two tiles etc., complete as per specifications. Bead urinal area SFT
2.00
1.90
10.76
40.89 40.89
18
Wall tile
Providing and fixing dado / wall tile using approved ceramic tiles laid on CM 1:3, 12mm thk plaster coat over a base coat of cement plaster 1:6, 12 to 20mm thk, suitable roughened, including cement slurry and pointing of joints with white cement mixed with necessary pigment to match, curing. Rates includes cutting tiles for fixing switches, fittings, including matching colour PVC beading at the junctions of the two tiles etc., complete as per specifications. Wall Tile For Bath rooms
SFT
1.90 1.90
10.76 10.76
19 20
Providing and fixing PVC Bath room Door WATER SUPPLY Providing and fixing of pipelinnes SANITARY WORKS a Fixing of wash basin b Fixing of urinal ROOF WORK
LS
No No
1.00 2.00
21 Taking delivery of steel from yard, fabricating, erecting and fixing in position as per drawing, specification and as directed by the Engineer-in-Charge, for all MS rolled steel sections made out of MS Channels, MS Joists, MS Angles, MS Plates, MS Rods, MS Flats etc. for trusses, purlins, girders, beams, base plate, supports etc., including all labour charge and conveyance, straightening, cutting, fabricating, hoisting & fixing in position, necessary welding, consumables, tools & tackles and painting two coats of anti corrosive yellow zinc chromate primer & two coats of synthetic enamel paint of approved make etc. complete at all levels. (All structural steel items will be supplied free of cost by the owner at their stores). Truss using rolled steel sections No of Trusses - 10 Trusses for passage For columns ISMB 200 Purlins - Z purlins - 6kg /m 22 Taking delivery of sheets from yard, fixing of Galvalume Hi Rib Profiled Sheeting 970mm-1000mm covered width, 26-28mm crest height at 195-200mm centres made out of 0.5mm TCT cold rolled steel 550Mpa yield strength confirming to ASTM A 368 For roofing, cladding, louver, ridge etc. SQM 1 3.2 2.5 8.00 8.00 Kg Kg Kg M 10 4 20 672 450 100 3.6 1828.8 6 4,500.00 400.00 1,828.80 4,032.00
Subtotal
Total (Rs.)
1000 250
225 250
165
231
3047.5
1158.05
2535
3549
3900
11017.50
143.75
4334.0625
40
666.40
26
1063.088
26 2000
3773.9624 2000
15000
1500 1500
1500 3000
100
800
317588.06