Вы находитесь на странице: 1из 5

MICRO DIAPHRAGM LIQUID PUMPS

DATA SHEET NF1.30

NF 1.30
NF 1.30 KTDCG

Concept
KNF micro diaphragm liquid pumps are based on the principle of the oscillating displacement pump which is remarkably simple in design. The circular power from the motor is converted into vertical movement by an eccentric. This motion is then transferred to a diaphragm by means of a connecting rod which in conjunction with an inlet and outlet valve creates a pumping action. NF 1.30 type liquid pumps can be mounted in any position and can deliver up to 0.17 l / min depending on the model and will operate against pressures of up to 60 mWg. The KNF modular system contains a wide standard range of materials, motors, voltages and frequencies to enable the selection of an optimal solution for your application.

Features
Small and powerful
Micro design and maximum performance resulting from built-in technology are the outstanding characteristics of this product.

Areas of use
The versatility of KNF pumps allows a wide field of applications to be covered. Over many years our pumps have proved themselves in the following areas:

Analysers Self-priming and excellent for pressure


Sophisticated diaphragm technology and precise valve structures enable performances of up to 5 mWg suction and 60 mWg pressure. Medical / pharmaceutical Environmental / water treatment Food / toxicology

Laboratory
Filtration Chromatography

Extreme chemical resistance


The use of chemically resistant materials such as PTFE, PVDF, FFPM or other material combinations for the parts which come in contact with the liquid allows almost all neutral or corrosive liquids to be pumped.

Cleaning industry
Cuvette cleaning Sterilisers Industrial washing machines

Printing
Ink jet printing Photographic / film development Other applications for diaphragm liquid pumps include: fuel cells, hydrogen generators, CD coating, dental technology, textiles and many more.

Dry running, durable and maintenance free


The carefully considered design of these pumps allows them to be run dry and ensures safe operation and a long life even under the most severe conditions.

Performance Data
Type NF 1.30 Flow rate (l/min) Suction head (mWg) 0.17 5 Pressure head (mWg) 60

The KNF Modular Concept of Selection

General note
This Data Sheet provides an overview of the options with our NF 1.30 pumps. Certain standard options will be explained in more detail where necessary.

Modules
Our versatile self-selection program allows you to personally determine the optimum characteristics that you require from your pump. Select your diaphragm pump from the following characteristics:

Flow curves
The flow curves illustrate how the flow rate alters in relation to the pressures before and after the pump. In the case of a combination of both we would be very happy to advise what the expected flow rate would be. The values given in the curves are dependant upon the liquid, choice of head materials and the type of hoses being used. Therefore a certain deviation is to be expected. Note: The flow rate is measured with water at 20C Pump type Basic model 1 NF 1.30 Components 2 3

Werkstoffe (Kopfmaterialien) Head Valve cartridges Diaphragm Head Valve cartridges Diaphragm PP PP / FFPM PTFE PVDF PVDF / FFPM PTFE

Materials of head components

KT

KNF FLODOS offers a wide range of different materials for those parts which come in contact with the liquid thus allowing the possibility of pumping most liquids. The pump head of the NF 1.30 is made up of seven main parts. The diaphragm, intermediate plate, connection plate, valve cartridges and the sealing rings are the only parts which come in contact with the liquid. The materials which are available as standard can be seen in the table.

TT

2 DCG

Motors Direct current geared motor

3 12 / 24V

Voltages / Frequencies for direct current geared motor

2
DCG

Motoren
Direct current geared motor In contrast to the rest of the NF series, this product is equipped with a geared motor (n = 300 rpm). Due to the relatively low stroke rate of the pump, the NF 1.30 is capable of pumping against high pressures and dosing small quantities

Voltages / Frequencies

Choose from the different electrical connection possibilities. Special variations are available.

NF 1.30-DCG

Performance
Basic model Flow rate at Max. suction atmos. pressu- head re (l/min) (mWS) 0.17 5 Max. pressure head (mWS) 60

NF 1.30

Motor selection Voltage (V) Power rating (W) I max. load (A) I max. (A) EMC guideline Weight (g) Motor protection factor

DCG 12 / 24 7.32 / 8.4 0.61 / 0.35 0.84 / 0.46 EN 55014-1 220 IP 00

NF 1.30-DCG
3.1 30 ~16 Schlauch/horse DN4/6 61.4 30.5 4xM 3 Tiefe 6.5mm depth 6.5mm 30 26

2x

27

1.2

102

16.5

7.5

51.6

A
15 2.2 19

Flow curve NF 1.30-DCG


0.35 0.30 Flow Rate [l/min] 0.25 0.20 0.15 0.10 0.05 0 6 4 2 0 10 20 30 40 50 60 Suction Head [mWg] Pressure Head [mWg]

Accessories

Options

Diaphragm pressure control valve


The pressure control valve can be used for a more accurate control of flow against a fluctuating back pressure, metering into a vacuum and from a pressurised system. Used correct it can save pumps, plumbings and other fittings from damage.

High protection IP65 version


We can offer the NF 1.30-DCG with an IP65 housing for applications under bad conditions (moisture, dust, etc.).

The NF 1.30 pump range comes with many other options. If you require any further information concerning the following features, our local sales representative would be very happy to be of assistance.

Pulsation damper
This very versatile pulsation damper reduzes the vibration in hoses and pipes and it helps to remove pulsation which is preventing the system from functionning correctly. It also protects instrumentation connected after the pump.

Further options
Other connections (UNF 1/4-28) Other head materials (PTFE, Stainless Steel, etc.) Different gear ratios Brushless geared motor Integrated pressure control valve (.27) The incorporation of customers special requirements, for example special electrical connections (Molex, AMP, etc.)

Further accessories
Hoses Hoses connections Shock mounts

We specialise in tailor made solutions. For all the possible options feel free to contact us.

KNF FLODOS AG, Wassermatte 2, 6210 Sursee, Switzerland - www.knf-flodos.ch, info@knf-flodos.ch


Technical Status: 11/2012 KNF FLODOS reserves the right to make technical changes Printed in Switzerland ID Nr.069191

The KNF-Group worldwide


Germany KNF Neuberger GmbH Alter Weg 3 D-79112 Freiburg Tel. +49 7664 5909 0 Fax +49 7664 5909 99 info@knf.de www.knf.de Benelux Netherlands KNF Verder B.V. Utrechtseweg 4a NL-3451 GG Vleuten Tel. +31 30 677 92 40 Fax +31 30 677 92 47 info@knf-verder.nl www.knf-verder.nl Benelux Belgium and Luxembourg KNF Verder N.V. Kontichsesteenweg 17 B-2630 Aartselaar Tel. +32 3 871 96 24 Fax +32 3 871 96 28 info@knf.be www.knf.be China KNF Neuberger Trading (Shanghai) Co., Ltd. No. 36 Lane 1000 Zhang Heng Road Shanghai 201203 Tel. +86 21 6859 6566 Fax +86 21 6859 6568 info@knf.com.cn www.knf.com.cn France, Marocco, Tunisia, Algeria KNF Neuberger S.A. 4, Bld. dAlsace Z.I. F-68128 Village-Neuf Tel. +33 389 70 35 00 Fax +33 389 69 92 52 info@knf.fr www.knf.fr United Kingdom KNF Neuberger U.K., Ltd. Avenue 2, Station Lane Industrial Estate Witney, Oxfordshire OX28 4FA Tel. +44 1993 77 83 73 Fax +44 1993 77 51 48 info@knf.co.uk www.knf.co.uk India KNF Pumps + Systems (India) Pvt. Ltd. RAJIV GANDHI INFOTECH PARK, Phase 1, Ganga Estate, Survey No. 152/2/2, Above AXIS BANK, Hinjewadi, Pune 411 057 Tel. +91 20 640 13 923 +91 20 640 08 923 Fax +91 20 229 33 923 info@knfpumps.in www.knfpumps.in Italy KNF ITALIA S.r.l. Via Flumendosa, 10 I-20132 Milano Tel. +39 02 272 03 860 Fax +39 02 272 03 848 info@knf.it www.knf.it Japan KNF Japan Co.Ltd. Across Shinkawa Bldg. Annex 3F, 1-16-14 Shinkawa, Chuo-ku, Tokyo 104-0033 Tel. +81 3 3551 7931 Fax +81 3 3551 7932 info@knf.co.jp www.knf.co.jp Korea KNF Neuberger Ltd. Woosan Bldg.Rm#202 336-4, Hwikyung-Dong Dongdaemun-Ku 130-090, Seoul Tel. +82 2 959 0255 Fax +82 2 959 0254 knf@knfkorea.com www.knfkorea.com Sweden, Finland, Denmark, Norway KNF Neuberger AB Mejerivgen 4 P.O. Box 44060 SE-10073 Stockholm Tel. +46 8 744 51 13 Fax +46 8 744 51 17 info@knf.se www.knf.se Switzerland Sales KNF Neuberger AG Stockenstrasse 6 CH-8362 Balterswil Tel. +41 71 973 99 30 Fax +41 71 973 99 31 knf@knf.ch www.knf.ch Switzerland Production Liquid Pumps KNF FLODOS AG Wassermatte 2 CH-6210 Sursee Tel. +41 41 925 00 25 Fax +41 41 925 00 37 info@knf-flodos.ch www.knf-flodos.ch Switzerland Production Micro Pumps KNF Micro AG Zelglimatte 1b CH-6260 Reiden Tel. +41 62 787 88 88 Fax +41 62 787 88 99 info@knf-micro.ch www.knf-micro.ch Taiwan KNF Neuberger Ltd. 9F-2, No. 24, Lane 123, Section 6, Min Chuan East Road Neihu District Taipei City, 11490 Tel. +886 2 2794 1011 Fax +886 2 8792 1648 knftwn@knftwn.com.tw www.knftwn.com.tw USA, Canada, South America KNF Neuberger, INC. Two Black Forest Road Trenton, New Jersey 08691-1810 Tel. +1 609 890 8600 Fax +1 609 890 8323 knfusa@knf.com www.knfusa.com Latin America Tel. +1 609 649 1010 gb@knf.com

Diaphragm Pumps + Systems

KNF Neuberger GmbH

KNF Neuberger, INC.

KNF Micro AG

KNF Neuberger S.A.

KNF FLODOS AG

The KNF-Production worldwide


Germany KNF Neuberger GmbH Freiburg-Munzingen France KNF Neuberger S.A. Village-Neuf Switzerland KNF FLODOS AG Sursee Switzerland KNF Micro AG Reiden USA KNF Neuberger, INC. Trenton - New Jersey

27_6_2013

Вам также может понравиться