Академический Документы
Профессиональный Документы
Культура Документы
2
A network technician is attempting to add an older workstation to a Cisco switched
LAN. The technician has manually configured the workstation to full-duplex mode in
order to enhance the network performance of the workstation. However, when the
device is attached to the network, performance degrades and excess collision are
detected. What is the cause of this problem?
The host is configured in a different subnet from the subnet of the switch.
The switch port is running at a different speed from the speed of the workstation NIC.
The host has been configured with a default gateway that is different from that of the
switch.
3
What is the correct command sequence to configure a router host name to "LAB_A"?
Router> enable
Router# configure terminal
Router(config)# hostname LAB_A
Router> enable
Router# hostname LAB_A
Router> enable
Router# configure router
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
Router> enable
Router(config)# host name LAB_A
Refer to the exhibit. Which password or passwords will be encrypted as a result of the
configuration that is shown?
5
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
Which function is a unique responsibility of the DCE devices shown in the exhibit?
transmission of data
reception of data
6
How does the SYST LED on the catalyst 2960 switch indicate a POST failure?
steady amber
steady green
7
Which tasks can be accomplished by using the command history feature? (Choose
two.)
8
Which of the following statements are true regarding the user EXEC mode? (Choose
two.)
9
Which mode will a configured router display at login?
setup mode
10
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
Refer to the exhibit. From the router console, an administrator is unable to ping a
Catalyst switch that is located in another building. What can the administrator do from
her location to check the IP configuration of the attached switch?
Use the show cdp neighbors detail command from the router console.
The administrator must go to the switch location and make a console connection to
check these settings.
11
Refer to the exhibit. Which series of commands will enable users who are attached to
Router1 to access the remote server?
12
Refer to the exhibit. A company always uses the last valid IP address in a subnetwork
as the IP address of the router LAN interface. A network administrator is using a
laptop to configure switch X with a default gateway. Assuming that the switch IP
address is 192.168.5.147/24, what command will the administrator use to assign a
default gateway to the switch?
13
In what two ways does SDM differ from the IOS CLI? (Choose two.)
SDM is used for in-band management only. The IOS CLI can be used for in-band and
out-of-band management.
SDM is accessed through a Telnet application. The IOS CLI is accessed through a
web browser.
SDM is available for all router platforms. The IOS CLI is available for a limited
number of Cisco devices.
SDM utilizes GUI buttons and text boxes. The IOS CLI requires the use of text-based
commands.
SDM is used for advanced configuration tasks. The IOS CLI is preferred for initial
basic device configuration.
14
Which two options must be selected in SDM Express to enable a router serial
interface to obtain an IP address automatically? (Choose two.)
IP unnumbered
No IP address
HDLC encapsulation
PPP encapsulation
15
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
What option within Cisco SDM Express must be configured to allow hosts that
receive IP address settings from the router to resolve names on the network or
Internet?
host name
domain name
16
What three settings can be made in the SDM Express basic configuration screen?
(Choose three.)
host name
DHCP options
domain name
interface IP addresses
17
A network administrator needs to configure a router. Which of the following
connection methods requires network functionality to be accessible?
console
AUX
Telnet
modem
18
A technician has made changes to the configuration of a router. What command will
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
allow the technician to view the current configuration before he saves the changes?
19
Which three encapsulation types can be set on a serial interface by an administrator
who is using SDM Express? (Choose three.)
ATM
CHAP
Frame Relay
HDLC
PAP
PPP
20
Which three pieces of information about a neighbor device can be obtained by the
show cdp neighbors command? (Choose three.)
**platform
routing protocol
**device ID
21
Which command will display routing table information about all known networks and
subnetworks?
22
Refer to the exhibit. Which three sets of commands are required to enable
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
administrators to connect to the Switch1 console over Telnet for configuration and
management? (Choose three.)
23
To save time, IOS commands may be partially entered and then completed by typing
which key or key combination?
Tab
Ctrl-P
Ctrl-N
Up Arrow
Right Arrow
Down Arrow
24
Which command turns on a router interface?
Router(config-if)# enable
CCNA Discovery 4.1 - CCNA Discovery Answers
http://ccna-discovery-4.blogspot.com/
Router(config-if)# no down
Router(config-if)# s0 active
Router(config-if)# interface up
Router(config-if)# no shutdown
25
Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the
modes and interfaces that can be protected with passwords. (Choose three.)
VTY interface
console interface
Ethernet interface
Note: These answers will give you 87.3%. numbers 3,12,24,25 are incorrect.