Академический Документы
Профессиональный Документы
Культура Документы
Gansow is a division of the IPC Group. IPC - Integrated- Professional Cleaning - was set up in 2005 following the merger of a number of leading companies in the professional cleaning sector, each specialising in a different market segment. The size and international dimension of the new IPC group make it one of the worlds leading producers of professional cleaning machines and equipment, with a vast range of prestigious products and brands. IPCs aim is to capitalise on the experience and points of excellence present in the group, combining the benets deriving from the size of
the organisation with the advantages of specialisation in the various sectors. The new logo visually and symbolically identies the values of belonging, specialisation, strength and innovation of IPC. The logo, a cross-section of a technological lime, symbolises the natural link with the idea of cleanliness and at the same time represents a constant drive for research and innovation. The rays of the segments open out from a single central driving force, emphasising the specic characteristics of the individual companies and at the same time their belonging to a system capable of bringing out the best of both the individual and collective dimension.
Gansow, a division of IPC, is specialised in the oor care sector, producing motorised sweepers and scrubber driers for professional use. With more than 30 years experience, it has conquered the international market which today represents 80% of its total turnover. Its rm commitment to research and constant efforts to improve its range, have led IPC Gansow to develop two product ranges: one line dedicated to the professional market and the other, a premium line for a more specialised and demanding market. High quality, unquestionable performance and the service provided by its distribution network
make IPC Gansow a partner able to resolve all cleaning problems at any level. Capable of creating added value for the distributor and end user, in terms of both economic advantages and quality. Research, the particular care taken over ergonomics and close study of market evolution enable IPC Gansow to produce machines which are safe to use, accompanied by a complete range of standard accessories to provide a full response to all the users requirements, in respect of the environment. IPC Gansow is UNI EN ISO 9001:2000 certied.
Machines Index
CT15
[NEW]
Page 5
[NEW]
CT30 Page 7
CT40
Page 9
CT70
Page 13
CT90
Page 17
CT100
Page 21
[NEW]
CT70 Rider Page 25
CT110
Page 29
CT160
Page 33
[NEW]
CT230 Page 37
Accessories Index
IPC Integrated Professional Cleaning
Page 41
Page 45
Power Box
100V/230V
Page 49
Trolley System
Page 53
Chem Dose
Page 57
Other accessories
Page 59
Application
Page 60
Scrubber Drier
CT 15
Scrubs in difcult to reach areas Solution control (Solenoid valve)
[NEW]
Great Productivity
High Performance
CFS (Center Flow System) High quality and performance vacuum motor Easy to transport
Techncal data
Scrubbing width Suction width Productivity (max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT15 C
350 450 1300 1 (disc) 16 19 220 - 240V 50 Hz 3,5 37,5 395x740x535
CT15 B
350 450 1300 1 (disc) 16 19 24V (2x12V) 3,5 59 (batteries included) 395x740x535
Scrubber driers
CT 15
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact (optional) Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Height-adjustable handlebar
It is possible to adjust the handlebar height during work to ease the cleaning operations in difcult to reach areas.
Scrubber Drier
CT 30
Scrubs in difcult to reach areas Solution control (Solenoid valve)
[NEW]
Great Productivity
High Performance
CFS (Center Flow System) High quality and performance vacuum motor Easy to transport
Techncal data
Scrubbing width Suction width Productivity (max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT30 C
450 550 1670 1 (disc) 28 30 230V 50 Hz 3,5 50 960x550x1220
CT30 B
450 550 1670 1 (disc) 28 30 24V (2x12V) 3,5 50 960x550x1220
Scrubber driers
CT 30
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact (optional) Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Height-adjustable handlebar
It is possible to adjust the handlebar height during work to ease the cleaning operations in difcult to reach areas.
Scrubber driers
CT 40
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop Available also with electric powered traction (BT version) Brush control with automatic delayed stop
10
Scrubber driers
CT 40
High Performance
Solution distribution from brush center
CWS (Constant Weight System) Exclusive squeegee system assures high performance at low cost High quality and performance vacuum motor Combined scrubbing-sweeping system that includes debris hopper (R version)
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Squeegee assembly and blades replacement without tools Easy access to internal compartments
Recovery tank discharge point and hose at maximum height Solution tank can be tilted
External battery charger plug On board charger can be tted also at a later stage
11
Scrubber driers
CT 40
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h
CT40 C 50
CT40 C 55
550 815 1925 1 (disc) 40 50 220-240V 50 Hz 3,5 (mechanical) 83 1230 x 516 x 962
CT40 B 50
500 815 1750 1 (disc) 40 50 24V (2x12V) 3,5 (mechanical) 67 1230 x 516 x 960
CT40 B 55
550 815 1925 1 (disc) 40 50 24V (2x12V) 3,5 (mechanical) 68,5 1230 x 516 x 962
CT40 BT 50
500 815 2250 1 (disc) 40 50 24V (2x12V) 4,5 (electric) 73 1230 x 516 x 960
CT40 BT 55 CT40 BT 55 R
550 815 2475 1 (disc) 40 50 24V (2x12V) 4,5 (electric) 74,5 1230 x 516 x 962 550 815 2475 2 (cyl.) 40 50 24V (2x12V) 4,5 (electric) 100 1190 x 640 x 960
450 500 815 815 1575 1750 1 (disc) 1 (disc) l 40 40 l 50 50 220-240V 50 Hz vers. C 220-240V 50 Hz 24V (2x12V) vers. B Km/h 3,5 (mechanical) 3,5 (mechanical) 83 vers. C Kg 83 67 vers. B mm 1230 x 516 x 960 1230 x 516 x 960
(*) The C/B versions are not equipped with solenoid valve.
12
Scrubber driers
CT 40
RecoVerY
SolUtion
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
13
CT 70
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Available also with electric powered traction (BT version) Brush control with automatic delayed stop
Scrubber driers
14
Scrubber driers
CT 70
High Performance
Solution distribution from brush center
CWS (Constant Weight System) Exclusive squeegee system assures high performance at low cost High quality and performance vacuum motor Combined scrubbing-sweeping system that includes debris hopper (R version)
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Squeegee assembly and blades replacement without tools Easy access to internal compartments
Recovery tank discharge point and hose at maximum height Solution tank can be tilted
External battery charger plug On board charger can be tted also at a later stage
15
Scrubber driers
CT 70
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absob harsh impact Panel control switches protected against water and humidity 1 brush version
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
CT70 C/B 50 CT70 B55 CT70 C/B60-1 CT70 BT55 CT70 BT60-1 CT70 BT60 CT70 BT70 CT70 BT85 CT70 BT55 R 500 550 600 550 600 600 700 850 550 815 815 1010 815 1010 815 1010 1010 815 1750 1925 2100 2475 2700 2700 3150 3825 2430 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 2 (disc) 2 (disc) 2 (disc) 2 (cyl.) l 70 70 70 70 70 70 70 70 70 l 75 75 75 75 75 75 75 75 75 220-240V - 50 Hz C vers. 220-240V - 50 HzC vers. 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) B vers. 24V (2x12V) B vers. Km/h 3,5 (mech.) 3,5 (mech.) 3,5 (mech.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 86,5 B vers. 84,5 B vers. 91,5 92,5 93,7 94,5 95 100 85,5 Kg 110,5 C C vers. 108,5 C vers. mm 1215x543x960 1215x543x960 1265x645x960 1230x587x960 1265x645x960 1210x680x960 1220x748x960 1260x893x960 1190x640x960 mm mm m2/h
16
Scrubber driers
CT 70
RecoVerY
SolUtion
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
17
CT 90
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic delayed stop
Scrubber driers
18
Scrubber driers
CT 90
High Performance
Solution distribution from brush center
CWS (Constant Weight System) Exclusive squeegee system assures high performance at low cost High quality and performance vacuum motor
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Squeegee assembly and blades replacement without tools Easy access to internal compartments
Recovery tank discharge point and hose at maximum height Solution tank can be tilted
External battery charger plug On board charger can be tted also at a later stage
19
Scrubber driers
CT 90
BT60 version
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT90 BT60
600 816 2700 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 97,6 1328x680x1025
CT90 BT70
700 942 3150 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 98,4 1358x748x1025
CT90 BT85
850 942 3825 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 104 1446x893x1025
20
Scrubber driers
CT 90
RecoVerY
SolUtion
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
21
CT 100
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic delayed stop
Scrubber driers
High Performance
PAT
ENT
ED
SLS (Self Levelling System) automatic brush pressure control High quality and performance vacuum motor
22
Scrubber driers
CT 100
External battery charger plug On board charger can be tted also at a later stage
23
Scrubber driers
CT 100
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Squeegee assembly and blades replacement without tools Easy access to internal compartments
Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT100 BT 60
600 950 2700 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 162 1572x670x1075
CT100 BT 70
700 950 3150 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 170 1596x744x1075
CT100 BT 85
850 950 3825 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 173 1641x880x1075
24
Scrubber driers
CT 100
RecoVerY
SolUtion
Patented
25
CT 70 Rider
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic delayed stop
Scrubber driers
[NEW]
The CT70 Rider scrubber drier is designed to work on small and medium surfaces easier and faster. It has all the advantages and the manoeuvrability of a walk behind machine, with the performance and comfort of a ride-on. CT70 Rider is also equipped with Center Axis System, in order to ensure the perfect cleaning of external corners with a single pass unlike traditional rider machines.
26
Scrubber driers
CT 70 Rider
High Performance
Solution distribution from brush center
CWS (Constant Weight System) Exclusive squeegee system assures high performance at low cost High quality and performance vacuum motor
External battery charger plug On board charger can be tted also at a later stage
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Squeegee assembly and blades replacement without tools Easy access to internal compartments
27
Scrubber driers
CT 70 Rider
Robust Construction
Tanks and surroundings body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Strong differential gear drive with special suspension system to climb slopes.
Technical Data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
28
Scrubber driers
CT 70 Rider
RECOVERY
SOLUTION
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shits off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the right LED comes on and the vacuum motor shuts down. The left LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
Maximum comfort
Very comfortable riding position thanks to the possibility of adjusting the steering according to the needs of the operator.
29
Scrubber driers
CT 110
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Brush control with automatic delayed stop 3 solution distribution options: Standard Automatic Economy
High Performance
Solution distribution from brush center Exclusive squeegee system assures high performance at low cost Pre-programmed working settings SLS (Self Levelling System) automatic brush pressure control High quality and performance vacuum motor
30
Scrubber driers
CT 110
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Automatic squeegee lift in reverse Squeegee assembly and blades replacement without tools Easy access to internal compartments
External battery charger plug On board charger can be tted also at a later stage
31
Scrubber driers
CT 110
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box
Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
BT 60 version
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT110 BT 60
600 815 3900 2 (disc) 110 115 24 V / 280 Ah 6,5 209 1504x722x1201
CT110 BT 70
700 940 4550 2 (disc) 110 115 24 V / 280 Ah 6,5 214 1504x759x1201
CT110 BT 85
850 1010 5525 2 (disc) 110 115 24 V / 280 Ah 6,5 231 1504x909x1201
32
Scrubber driers
CT 110
RECOVERY
SOLUTION
Huge tank capacity in minimum external space 110-115 litre capacity tanks make this model very unique in its category
Maximum comfort and extreme ease of use Very comfortable riding position, thanks to the possibility of adjusting the steering according to the needs of the operator. The control panel is easy and intuitive to use and programme. All devices are clearly visible and easy to reach.
This innovative technology enables the chemical product to be kept separate from the clean water tank, improving washing and optimising detergent consumption (from 1 10% of the water used). The Chem Dose System provides three further options: Standard: manual regulation Automatic: the ow of solution is regulated in proportion to the speed of the machine Economy: minimal detergent delivery
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
33
Scrubber driers
CT 160
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic delayed stop
High Performance
Pre-programmed working settings SLS (Self Levelling System) automatic brush pressure ED ENT control T A P High quality and performance vacuum motor Combined scrubbing-sweeping system that includes debris hopper (R version)
34
Scrubber driers
CT 160
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement Automatic squeegee lift in reverse Squeegee assembly and blades replacement without tools Easy access to internal compartments
Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Automatic stop (by comand release) in working mode Solution tank level indicator
Flashing beacon
35
Scrubber driers
CT 160
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l Km/h Kg mm
CT160 BT 70
700 830 4550 2 (disc) 145 170 36V 6,5 273 1720x850x1360
CT160 BT 85
CT160 BT 95
ct160 BT 75R
750 1010 4875 2 (cyl) 145 170 36V 6,5 280 1760x885x1360
CT160 BT 75 R Sweep
750 1010 4875 2 (cyl) 145 170 36V 6,5 300 1810x1050x1360
850 950 1010 1100 5525 6175 2 (disc) 2 (disc) 145 145 170 170 36V 36V 6,5 6,5 290 292 1720x1010x1360 1720x1100x1360
36
Scrubber driers
CT 160
RecoVerY
Patented SolUtion
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the right LED comes on and the vacuum motor shuts down. The left LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
37
Scrubber driers
CT 230
Great Productivity
Huge solution tank capacity in minimum external space Extensive running time (large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic delayed stop
[NEW]
High Performance
Pre-programmed working settings SLS (Self Levelling System) Automatic brush pressure D E ENT control PAT High quality and performance vacuum motor
38
Scrubber driers
CT 230
Flashing beacon
Automatic stop (by command release) in working mode Solution tank level indicator
Brush replacement without tools Squeegee blade can be used on 4 sides before replacement
39
Scrubber driers
CT 230
Robust Construction
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box
Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH) mm mm m2/h l l V Km/h Kg mm
CT230 BT 85
850 1010 5400 2 205 225 36V 6.5 350 1950x935x1466
CT230 BT 105
1050 1280 6825 2 205 225 36V 6.5 377,5 1950x1155x1466
40
Scrubber driers
CT 230
RECOVERY
PATENTED SOLUTION
Water level control on both tanks. Maximum protection for the vacuum motor (Water Level Sensor)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the right LED comes on and the vacuum motor shuts down. The left LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
BATTERY LIFE
TRADITIONAL BLS + TCL
Temp
42
Gansow
Wet
Good ratio between cost and cycles (only tubular type) Charging of batteries cannot be made in a closed area Periodic maintenance required Battery looses its charge during battery life
Sealed
Recharging of the batteries can be made in a closed area Battery maintains its charge during battery life No maintenance required Higher purchase cost
2. Talking about cycles: be careful! Your talking about battery life time
A cycle is intended in a nearly total discharge of the battery plus its total re-charge once again. The declared cycles of a battery equals the declaration of its life; for example 100 cycles corresponds to 100 discharges and relative recharges. Unlike the material handling eld, in which traction batteries are developed for an average use of at least 5 hours, the young professional cleaning machine eld has an average use of less than 2 hours. The international norms in force make battery manufactures declare the number of cycles connected to a discharge in 5 hours. The Cleaning machinery market cannot (if not for a limited number of larger machinery requirements) recognise such discharge rate, as the machines are used on average for 2 hours. At this point the cycles of a battery become much more important, as they are a lot less than what is declared, respecting the international norms in force. Cleaning machine reality compared to cycle declaration norms
Ah
Clea
2542h
Theory 5h
3. Also the way the battery is used has an important impact on its life scale
Obtaining the best out of a battery cycle means two things; discharge the battery nearly to its minimum, and then re-charge it once again to its total initial charge. A disorderly discharge and charge can not only reduce consistently the life of the battery, but also make the battery loose its total charge during the life time of the battery.
Discharge Charge Discharge Charge
Complete cycle The battery is discharged until 80%, and then re-charged totally.
Incorrect cycle The battery is not discharged totally before being re-charged.
43
Gansow
12V - 24V - 36V - 48V Wet - Gel - AGM 4A - 13A - 20A - 25A - 30A
More than 50 different congurations that cover all the cleaning machine market needs in only 2 models.
Battery Life Saver is an exclusive system developed by IPC Gansow for Professional Cleaning that can reduce down by up to 30% battery managing costs. The knowledge matured in this eld has put IPC Gansow in a position to satisfy practically all needs with only two products, easily congurable upon the different market necessities..
Battery Life Saver: thanks to TCL technology can double the expected batteries life.
Battery Life Saver is an exclusive system developed by IPC Gansow for the Professional Cleaning sector, which reduces the battery managing cost.
CT40 CT70
25 min. 45 min.
1 full = 1 cycle = 1 daily charge 3 fulls = 1 cycles = 1 charge every 3 days 1 full = 1 cycle = 1 daily charge 2 fulls = 1 cycles = 1 charge every 2 days
Leading technology:
A real manager of all necessary parameters, to protect batterie sand maximise their working life. All of this reducing to a minimumthe electricity required.
Incomparable for what concerns dimensions and compactness. The product has been studied to allow xing to walls, or to be place done on top of the other without the need of other accessories.
44
Gansow
Easy to use
Reclining handle
Battery Capacity (Ah 20h) Charging time 10/12 h: 40 - 160 Charging time 12/14 h: 60 - 170
40x60x100
BLS020
90x70x100
4,5
Charging time 10/12 h: 90 - 180 Charging time 10/12 h: 120 - 240 Charging time 12/14 h: 130 - 200 Charging time 12/14 h: 170 - 260
w w w . i p c g a n s o w . c o m
45
Gansow
46
Gansow
Recyclable up to 95 %
IPC Gansow batteries are designed in full respect of the regulations for the environmental preservation. All the materials used are recyclable up to 95%
47
Gansow
8 Nm
Terminals are protected with specic plastic caps which can be taken off just with a simple screwdriver Terminal type
Item code
Voltage [V]
12 6 6
48
Gansow
Battery Life Saver, thanks to TCL technology can double the expected battery life
Battery Life Saver is an exclusive system developed by IPC Gansow for the Professional Cleaning sector, which reduces the battery managing cost.
BATTERY LIFE
TRADITIONAL BLS+TCL
Temp
Leading technology:
The BLS charging curves, approved by the best battery manufacturers, have been specically studied to ensure constantly the optimal charge of IPC Gansow batteries.
49
Power BOX
Energy in motion
12 / 24 / 36V
100V/230V
Revolutionise your cleaning methods, and more! Applicable on IPC Gansow scrubbers and sweepers
50
POWER BOX
Energy in motion
51
POWER BOX
Energy in motion
Collect leaves
Polish Trim hedges Wash carpets and fabrics Mow lawns Disinfect
Wash
52
POWER BOX
Energy in motion
Inverter 1500W
Inverter 2500W
Coupling and uncoupling the trailer with a simple press of the foot.
Ready System
Equipment trailer
Waste trailer
Tool trailer
53
Revolutionise your cleaning methods, and more! Applicable on IPC Gansow scrubbers and sweepers
54
Coupling and uncoupling the trailer with a simple press of the foot
Examples of Trolley Systems. Over 100 customized work stations to satisfy any need, to transport utensils, material and waste debris.
55
56
Aluminium handle
Microbre cloth
Set complete of bucket with cone wringer, mop and metal handle for washing (small area)
Ready System
Gansow
57
CHEM DOSE
Automatic detergent delivery system
CHEM-DOSE
Riduci i tuoi costi di pulizia! Sistema applicato sulle lavasciuga IPC Gansow Reduces your cleaning costs! Chem-Dose un sistema innovativo che consente alle lavasciuga IPC Gansow di gestire il System tted to IPC Gansow scrubber driers detergente chimico in modo autonomo dal serbatoio dellacqua.
Il sistema pu essere attivato e disattivato in qualsiasi momento e consente una miscelazione del prodotto chimico con percentuali 0,5% per litro acqua fino al 10% per il Chem-Dose is precisa an innovative system which enables IPCregolabili Gansow dal scrubber driers to handle detergent modello applicato separately from the water tank.sulla macchina CT110 e dallo 0,5% per litro acqua fino al 3% per il modello applicabile sulle or macchine uomo a CT70 e CT90. The system can be activated deactivated interra any CT40, moment and enables the detergent to be mixed precisely in percentages of from 0.5% to 10% per litre of water for the model tted to the CT110 machine and from 0.5% to 3% per litre of water for the CT40, CT70 and CT90 walk behind models and for the CT70 Rider ride on model.
58
CHEM DOSE
Automatic detergent delivery system
CT 70
CT 70 Rider
CHEM-DOSE CT 90
CT 110
System tted on CT40, CT70, CT90 walk behind machines and on CT70 Rider ride on machine
High precision system which: Reduces detergent use to a minimum Constantly provides maximum cleaning efciency Saves a considerable amount of water, also thanks to the minimum regulation systems tted to the IPC Gansow machines Increases work productivity Keeps the water circuits clean and efcient
The system tted on the CT110 machine can also be used in ECONOMY and AUTO mode
59
Pads
Yellow disk: for daily maintenance of linoleum, PVC, marble and delicate surfaces.
Green disk: for regular (weekly) cleaning with strongly alkaline detergents. To use with caution on linoleum oors. Black disk: for in-depth cleaning and dewaxing of all oors except marble. Before use, perform a colour-fastness test on PVC, linoleum or studded oors.
Squeegee Blades
Patch Cords
M/F Schuco - 20 mt. 3x2,5 mm2 230v - 50 Hz M/F Schuco - 30 mt. 3x2,5 mm2 230v - 50 Hz
Front /Rear
Pad Holders
The pad holder can be used for various discs.
Battery
60
Industrial Applications
61
Via Cartesio, 39 42100 Villa Bagno (RE) - Italy Tel. +39.0522.266000 - 266011 Fax +39.0522.342045 www.ipcleaning.com - www.ipcgansow.com info@ipcleaning.com - infoipcgansow@ipcleaning.com
I.P.C. Marketing Department - 02/11 - 4.250 - Cod. PLDC 05559 s.p. 4,91 - Printed by: Chinchio (PD) Italy