Академический Документы
Профессиональный Документы
Культура Документы
version 07
Centrifugal fans from ebm-papst are available with forward or backward curved blades. The outstanding feature of the external rotor motors is their compact, flat design, which results from integrating the external rotor motor into the impeller. "Blowers" refers to devices with scroll housing, while centrifugal fans are shipped without scrolls. Our complete range of blowers is available in AC and EC technology.
More power Centrifugal fans with backward curved blades are used primarily for intake suction and do not require a scroll housing. They have high hydraulic efficiency.
Quiet movement Centrifugal fans and blowers with forward curved blades always require a scroll housing. Their characteristic features are a low noise level, relatively small air flow with a high increase in static pressure, and space-saving application.
Company profile: ebm-papst Our key to success How to use this catalogue How to find your ebm-papst product How to order your ebm-papst product AC centrifugal fans, backward curved 13
AC centrifugal fans and blowers, forward curved Centrifugal fans and blowers, forward curved and single inlet Centrifugal blowers, forward curved and dual inlet
91
Table of content
221
405 EC centrifugal, backward Contacts Technology 610 3 Accessories 571 EC-SYSTEMS EC centrifugal, forward 549 EC centrifugal, backward for clean rooms
EC centrifugal fans and blowers, forward curved Centrifugal fans and blowers, forward curved and single inlet Centrifugal blowers, forward curved and dual inlet EC-SYSTEMS Options Switch power supplies External commutation electronics for rail technology Temperature sensor / control module Pressure control / selection module for 3 speeds Interface converter / RS485 repeater RS485 terminal box / hand-held control terminal Speed setting LISA control software / fan control software HMS controller Zubehr Inlet nozzles Guard grilles Connection leads Capacitors Terminal boxes Air filters Speed setting Motor protection switch Star-delta switch / repair switch Technology Technical parameters & scope Impellers Motors Control technology Distributors, agencies and subsidiaries
421
517
AC centrifugal, forward
AC centrifugal, backward
General information
General information
The entire scope of ventilation and drive technology: this is the world of ebm-papst. More than 9,800 people in Germany and throughout the world develop, produce and sell our motors and fans. Our global presence and our unique range of products based on a quality standard that surpasses every other have made us what we are: world market leader in motors and fans. Expertly knowing what our customers need and incessantly striving to arrive at the perfect application solution for a wide variety of different industries is what determines our daily work. Those who know us know the high standards we apply to our work and know our creed: to be as close to our customers as possible and to simply be the best in terms of innovation and reliability.
Rooted in ebm, PAPST and mvl, the three leading innovators in the development and production of motors and fans, ebm-papst has established itself as the world market leader. Now as ever, our legendary inventive spirit shines through in products that set standards in many segments of industry worldwide. We are proud to say that despite difficult competition, our performance has always been exemplary and outstanding in business, in our personal relationship with our customers, and of course with respect to technology and engineering. For decades, we have contributed to the world of air technology and drive engineering with small revolutions and large milestones. To maintain this advantage in skills and knowledge to get maximum quality and thus the highest degree of customer satisfaction, our employees around the world put their passion and dedication to work for you. Passionately involved in R&D Our catalogues just list the results of our incessant efforts in R&D: products of highest quality and reliability. After all, it is our passion to constantly try something new and improve what we have. In doing so, we take advantage of the latest development methods and state-ofthe-art technology and invest quite heavily in R&D facilities. Best of all, though, we rely on excellently trained and skilled engineers and technicians to be at your service in R&D and Sales & Distribution. Producing and safeguarding high-quality products and services This is our promise without any compromise. Whether produced in one of our five factories in Germany or one of our eleven international production sites, our products always have the same high level of quality. This quality control is something you can definitely rely on! And this across all levels of production and throughout all processes: consulting customers, development, material selection through to picking certified, choice suppliers and on to the production of parts and final delivery. On top of this, our products have to pass the most rigourous tests under all realistic operating conditions: continuous stress test, salt spray test, vibration test, or precision noise measuring, just to mention a few. And the product gets
desired characteristics have been determined to be just right. Environmental care is another priority with ebm-papst. This is why we have developed ou product line in EC technology, which makes for very low power consumption. Due to our manufacturing philosophy, there is absolute focus on environmental care in production, recycling, waste and waste water disposal. Global Domestic In order to be specialist for customised solutions throughout the world, you need strong partners. Global Domestic i.e. being present all over the world and being a national company in each individual country is how we have established ourselves in all important markets on this globe with our successful subsidiaries. And so you will always find ebm-papst close to home, speaking your language, and knowing the demands of your markets. Besides, our worldwide production alliance serves as a basis for competitive pricing. Our global services and logistic outlets, i.e. IT networking, safeguard short reaction times and just-in-time delivery. All our efforts are documented in a comprehensive quality management system, both for products and services. Being certified as complying with the tough requirements of the international and of standard DIN EN ISO 14001 is just one seal of approval we have received for our unceasing efforts to provide only the best quality products and services.
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Our innovations and technologies keep on turning into new industrial standards. This competitive capability can only be maintained by seeing ventilation as a whole: the interrelationship between, and thus the system of, motor engineering, aerodynamics, and electronics. These are our three core competencies, imminently connected and linked in each of our products. And so we handle air intelligently and quietly and continue to set new standards in drive technology. Our system solutions form the main part of our product range by now. And they will be our main key to success.
Production
Winding machine
Motor engineering, aerodynamics, electronics Our drive is well known and famous with specialists: our external-rotor motor, which has made us world market leader quietly, yet powerfully. Being versatile as to integration, it is ideally suited to the most diverse applications. Based on this principle, we here at ebm-papst have developed the widest range of fans and motor types in the world. And for hot or aggressive blower mediums, the internal-rotor motor is the perfect complement. Still, in drive engineering, certain applications simply require the internalrotor motor principle, and they are then realised with our motors specifically developed for such cases. Take, for instance, the steering support motor in the automotive field developed as innovation in active steering. Be it axial or centrifugal fans, centrifugal blowers, compact fans or tangential blowers: we always design fan blades, impeller blades and ducted housings with the specific application in mind. We strive to minimise noise and to optimise efficiency. This is the challenge that we have taken up and which we meet working away powerfully and quietly.
Finally, intelligence will become the decisive factor on all markets in future. After all, only in connection with electronics can drive and air flow as a system solution have an optimal effect in a product or application. Interfaces are avoided, and thus potential faults and failures. Setting new standards with EC technology Wherever intelligent air handling is required, where energy consumption needs to be reduced and performance has to be maximised, there our EC motors are your reliable answer. They do not waste financial or natural resources. Instead, they boost high efficiency, continuous controllability via analogue or digital inputs, long and maintenance-free service life, and robustness.
EC fan units for clean room technology. As the electronics are integrated and the unit is wired up completely and ready to plug in, there is no need for our customers to waste time and money on laborious wiring work. Sensitive EC sensor fans for the automotive Without any problems, the ebm-papst EC technology allows you to realise networked, bus-linked appliances, to integrate simple or complex controls at low cost and to also realise time and again new, customised and complete solutions. Here, ebm-papst excels as competent development partner, with our experience of more than 25 years and our excellent know-how in R & D and production also being well documented in a few hundred national and international patents. And there is also our ability to listen intently, to pay good attention to our customers and their demands in order to come up with new and pioneering ideas, such as: industry providing optimal selection of the air-conditioning unit in the car and, combined with booster blowers, individual air-conditioning of each and every passenger seat. EC gas blowers with commutation and control electronics including a processor. They are developed in such a way as to make the blower premix the required amount of air with the gas. Aerodynamics with these blowers are adjusted in such a way as to limited space at high back pressure.
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
The ebm-papst catalogue combines a technical and a product-specific section. Technical section: General information on how to select and find ebm-papst products for your specific application is found in the chapters "Selection" (p. 10) and "Technical parameters" (p. 572). In case you require technical background information on ebm-papst product groups, simply turn to the chapters "Impellers" (p. 576), "Motors" (p.590) and "Control technology" (p. 594). Product-specific section: The product-specific section is organised according to product diameters, lines, materials and/or design principles.
Headline The headline indicates which technology (AC or EC), which design (centrifugal, axial, etc.), and which line (e.g. S-Range) the product belongs to. Impeller diameter or other features are also indicated.
AC centrifugal fans
backward curved, 3-D, 400
Material: Impeller: Sheet aluminium, joined by tabs Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Part designation / Type R 2 E 190 -AO 26 -05 123 4 1) Type A axial fan S axial fan with guard grille W axial fan with wall ring V axial combination R centrifugal fan, single inlet G centrifugal blower, single inlet (with scroll housing) B centrifugal fan, dual inlet D centrifugal blower, dual inlet (with scroll housing) K centrifugal combination M motor P pumps
400
2
1,5
Frequency
Nominal data
Type R4E 400 R4E 400
subject to alterations
Hz 50 60 50 60
Capacitor
part number:
Curve
Speed/rpm (1)
5 6
Curves
[in H O] [Pa]
2
n [rpm]
A A B 1 2 1 2
Electr. connection
P1 [W] 370 331 469 430
LpA [dB(A)] 64 65 66 68
2,5
600
500
2,0
1,0
1 B
0,5
3) Type of motor D 3-phase motor E single-phase motor with capacitor G EC motor S shaded-pole motor Q square shaded-pole motor 4) Impeller diameter in mm 5) Key for mechanical design 6) Key for electrical design 7) Key for mechanical variants
56
100
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
Product description
General information
material, number of blades, direction of air flow, direction of rotation, system of protection, insulation class, mounting position, condensate discharge holes, mode of operation, design, bearing, technical equipment, EMC, leakage current, motor protection, electrical connection, cable exit, protection class, capacitor, product conforming to standards, approvals and options.
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
Nominal data AC products (up to motor size 074) and EC products (DC-fed): Free-blowing or at minimal backpressure AC products (from motor size 094) and EC products (AC-fed): In operating point at maximum load
Dimensions
b c d e 50.0 g 90.0
Inlet nozzle (long)
kg 7.1 8.8
54476-2-4013 54476-2-4013
d 1
50
90
22
11 5
0 ,3
EC centrifugal, forward
c 1
66
100 -0,4
124
404
257
370
268
All drawings represent the design principle and are not to scale. Dimensions are either given in the product drawing or, with varying dimensions, in the table of dimensions given above the drawing. EC-SYSTEMS 9 Contacts Technology Accessories
45
60
M6
g
Brass lead tips
b
Mounting dimensions
Technology
Accessories
Indication of relevant accessories and additional information The pages indicated at the bottom refer to the accessories, e.g. inlet nozzles, guard grilles, wall rings, etc. for this particular product, as well as additional information (e. g. the connection diagram).
55
28
57
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Curves and operating points The diagram gives air performance curves pertaining to the product. Refer to the operating point table to the right for information on speed, power consumption, current draw, sound level or sound pressure level and overall efficiency of the impeller.
EC centrifugal, forward
70.0 113.0
EC centrifugal, backward
AC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
5 11 0 10
AC centrifugal, backward
General information
Solutions for ventilation offered by ebm-papst In the field of ventilation, ebm-papst offers the perfect solution for a vast number of applications. Depending on motor, impeller and control technology, there is almost no limit to the number of possible combinations, thus making sure you can find the best solution for your application.
Criteria for selection When selecting a fan for a specific application, these parameters play an important role: Air flow with given back pressure Voltage supply, divided into DC and AC voltage (1~, 3~) Noise generation Efficiency Available mounting space Selecting a fan The following diagram shows the range of characteristic curves for the most important fan designs and serves as a helpful tool in preselecting a design on the basis of air flow and back pressure.
axial fans centrifugal fans, backward curved centrifugal blowers, single inlet centrifugal blowers, dual inlet diagonal fans
200
500
1000
2000
5000
10000
20000
50000
[m/h]
10
Have you found the suitable ebm-papst product and would like to order it now? In this case, simply contact your nearest ebm-papst sales office by E-mail, fax or phone.
In this case, simply contact your nearest ebm-papst sales office by E-mail, fax or phone. Our specialists in ventilation and drive technology are always there to help you find the best solution for your specific application. Using the questions provided in the checklist here as a guideline, you can make sure your ebm-papst contact has all the necessary information to handle your enquiry as efficiently and quickly as possible. Part designation / type Quantity needed Field of application Ambient conditions (humidity, temperature, climate) Impeller diameter Air flow Back pressure Voltage supply How your ebm-papst product is delivered In our order confirmation, you will find information on when, how and where to the delivery will be made. We deliver: Ex works (excluding packaging) Via freight carrier (we also use postal services for shipments up to 30 kg) All the other details such as packaging, freight, insurance and customs duty will be settled with your ebm-papst contact prior to the time we issue our order confirmation. For your nearest sales office, please turn to page 610. Is there anything else you need to know about your ebm-papst product? In this case, simply contact your nearest ebm-papst sales office by E-mail, fax or phone. We have the answer to your problem and are always glad to be able to be of assistance.
make sure your ebm-papst contact has all the necessary information to handle your enquiry as efficiently and quickly as possible.
11
Contacts
Technology
Using the questions provided in the checklist here as a guideline, you can
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
Checklist
AC centrifugal, forward
AC centrifugal, backward
General information
12
AC centrifugal fans with plastic impeller AC centrifugal fans with sheet steel impeller AC centrifugal fans with aluminium impeller
14 36 44
13
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal fans
backward curved, 133
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Partially cast in aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 133 R2E 133
subject to alterations
Hz 50 60 50 60
W 25 28 24 27
dB(A) 53 56 56 60
Curves
[in H2O] [Pa]
n [rpm]
A A B B 1 2 1 2
P1 [W] 25 25 25 26
240
200
160
0,6
120
0,4 2 2
80
0,2
0,8
40
A 0 50 100 150
B [CFM]
50
100
150
200
250
300
50 Hz
[m3/h] 60 Hz
14
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
c 73.0 91.0
Inlet nozzle (long)
kg 0.7 0.7
09566-2-4013 09566-2-4013
53,6 0,5
13
8
58 0,2
72
87
15
Brass lead tips
M4
6
60 3 00
2 0
41 60,6
2
Depth of screw max. 5 mm
15
Inlet nozzle p. 550 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
92,8
133
129
27,5
EC centrifugal, forward
c 1
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
AC centrifugal fans
backward curved, 133
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 22 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2S 133
subject to alterations
Hz 50 60
W 36 34
A 0.25 0.21
F/VDB
dB(A) 55 58
p. 596 f. B)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 38 38
2720 2720
240
200
160
0,6
0,8
120
0,4 2
80
0,2
40
50
100
150
[CFM]
50
100
150
200
250
300
50 Hz
[m3/h] 60 Hz
16
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 0.9
09566-2-4013
911 58 0,5 13
8
58 0,2
EC centrifugal, forward
92,8
133
72
87
M4
6
0 30
41 60,6
2
Depth of screw max. 5 mm
17
Inlet nozzle p. 550 Electr. connections p. 596 f.
Contacts
Technology
Accessories
60
EC-SYSTEMS
20
129
28,5
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal fans
backward curved, 175
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: A IP 44, B IP 20 Insulation class: A "F", B "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 175 R2S 175
subject to alterations
Hz 50 60 50 60
W 50 51 53 51
dB(A) 63 68 61 60
p. 596 f. A1) B)
Curves
[in H2O] [Pa] A A B B 1,25 1 2 1 2
P1 [W] 51 53 54 56
350
300
250
150
0,5 2
0,75
200
1,0
2 A
100
B 0,25
50
100
200
300
[CFM] [m3/h] 60 Hz
100
200
300
400
500
50 Hz
18
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
c l
Inlet nozzle (long)
kg 0.9 0.9
09576-2-4013 09576-2-4013
58 0,2
l
6
42 62
19
Inlet nozzle p. 550 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
M4
EC-SYSTEMS
125,5
72 131
175
170
20
27,5
90
EC centrifugal, forward
c 1 61,5 0,5
14
10
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: A variable, B axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, B also GOST
General information
AC centrifugal fans
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 190
subject to alterations
Hz 50 60
W 58 75
A 0.26 0.34
dB(A) 62 64
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 59 61
2490 2410
400
1,5
300
1,0
200
2 0,5
100
100
200
300
[CFM] [m3/h]
100
200
300
400
500
50 Hz
60 Hz
20
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.2
09576-2-4013
68,51 62,70,5
14
10
58 0,2
EC centrifugal, forward
270,1
2 15
125,5
92 131
190
170
27
90
45
0
6
44,6 62,8 M4
21
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
AC centrifugal fans
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 220 R2E 220
subject to alterations
Hz 50 60 50 60
W 85 90 85 115
dB(A) 73 74 72 75
Curves
[Pa] [in H O] A A B 1 2 1 2
P1 [W] 95 90 96 102
500
2,0
400
1,5
300
1,0
200
A B
100
0,5
100
200
300
400
500
[CFM] [m3/h] 50 Hz 60 Hz
200
400
600
800
22
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
d 63.0 73.0 e 15.0 25.0
Inlet nozzle (long)
kg 1.3 1.5
09609-2-4013 09609-2-4013
58 0,2
270,1
2 e
45
0 6
23
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
44 63
M4
EC-SYSTEMS
92 159
220
155
252
27
90
EC centrifugal, forward
711 d 0,5
21
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
22
AC centrifugal fans
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 225 R2E 225
subject to alterations
Hz 50 60 50 60
dB(A) 70 72 72 75
Curves
[Pa] [in H O] A A B 2,5 1 2 1 2
2
600
500
400
1,5
2,0
300
1,0
200
0,5
100
1 A
1 B
200
400
600
[CFM]
200
400
600
800
1000
1200
50 Hz
[m3/h] 60 Hz
24
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b 63.3 75.3 c 69.0 85.0 g 38.0 50.0
Inlet nozzle (long)
kg 2.1 2.1
96358-2-4013 96358-2-4013
58 0,2
270,1
2 35
45
0 6
g b 2
25
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
M4
EC-SYSTEMS
92 153
225
146
223
27
90
EC centrifugal, forward
c 1 83 0,5
28
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, B also GOST
General information
25
AC centrifugal fans
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: A "F", B "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 225 R4E 225
subject to alterations
Hz 50 60 50 60
W 135 200 40 37
dB(A) 69 71 59 61
Curves
[Pa] [in H O] A A B 2,5 1 2 1 2
2
600
500
400
1,5
2,0
300
1,0
200
0,5
100
[CFM]
200
400
600
800
1000
1200
50 Hz
[m3/h] 60 Hz
26
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
d 83.0 72.6 e 35.0 25.0
Inlet nozzle (long)
kg 2.1 1.8
96358-2-4013 96358-2-4013
58 0,2
270,1
2 e
45
0 6
62,6 89,3
27
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
M4
EC-SYSTEMS
92 153
225
146
223
27
90
EC centrifugal, forward
99 1 d 0,5
28
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: A variable, B axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
25
AC centrifugal fans
backward curved, 250
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: A "F", B C "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 250 R2E 250 R4E 250
subject to alterations
Hz 50 60 50 60 50 60
F/VDB 5.0 /400 5.0 /400 4.0 /400 4.0 /400 1.5 /400 1.0 /400
dB(A) 75 76 71 72 61 64
C -25 to +70 -25 to +45 -25 to +65 -25 to +45 -25 to +70 -25 to +80
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2 1 2
700
2,5
600
C C
500
400
1,5
2,0
2 A
300
1,0 B
200
C 0,5 2 1 1
100
1
200
400
600
[CFM]
200
400
600
800
1000
1200
50 Hz
[m3/h] 60 Hz
28
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b 84.3 73.3 84.3 c 99.0 89.0 99.0 d 97.5 83.0 72.6 e 42.0 35.0 25.0 g 56.0 45.0 56.0 k 27.0 27.0 29.0
Inlet nozzle (long)
Centrifugal fan R2E 250-AS47 -26 R2E 250-AV65 -01 R4E 250-AH01 -05
c 1 d 0,5
31
28
58 0,2
270,1
2 164,5 e
EC-SYSTEMS 29
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
92 172
250
255
45
0 6
g b 2 M4
Depth of screw max. 5 mm
90
Contacts
Technology
Accessories
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: A B variable, C axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, A C also GOST
General information
AC centrifugal fans
backward curved, 310
Material: Impeller: PA plastic 6.6 Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 310
subject to alterations
Hz 50 60
W 105 140
A 0.50 0.62
dB(A) 63 66
p. 596 f. A1)
Curves
[Pa] [in H O] A A A 1 2
300
200
1,0
100
1
0,5
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
30
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 3.5
97512-2-4013
1541
53 58 0,2
EC centrifugal, forward 31
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
2
Brass lead tips
97,5 1
30
60
M4
270,1
192
92 203 318
300
42
6 85 450 20
101 132
Contacts
Technology
Accessories
EC-SYSTEMS
27
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal fans
backward curved, 330
Material: Impeller: PA plastic 6.6 Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 330
subject to alterations
Hz 50 60
W 95 135
A 0.44 0.61
dB(A) 66 69
p. 596 f. A1)
Curves
[Pa] [in H O] A A A 1 2
300
200
1,0
100
1
0,5
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
32
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 3.6
51357-2-4013
1441
60 90 0,2
EC centrifugal, forward 33
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
104 1
54
28
M6
75 0,1
224
350
35
45
85
80 127
Contacts
Technology
Accessories
EC-SYSTEMS
20
37
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal fans
backward curved, 355
Material: Impeller: PA plastic 6.6 Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 355 R4E 355 R6E 355
subject to alterations
Hz 50 60 50 60 50 60
F/VDB 6.0 /400 6.0 /400 7.0 /400 7.0 /400 2.0 /400 2.0 /400
dB(A) 66 70 68 68 61 62
C -25 to +55 -25 to +40 -25 to +50 -25 to +30 -25 to +70 -25 to +50
Curves
[Pa] [in H O] A A B 1 2 1 2 1 2
400
1,5
B C C
300
1,0
A B 2 2
200
100
0,5
2 1 C 1 1
500
1000
1500
[CFM]
1000
2000
3000
50 Hz
[m3/h] 60 Hz
34
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c d e g
Inlet nozzle (long)
Centrifugal fan R4E 355-AF05 -05 R4E 355-AG01 -05 R6E 355-AB16 -05
c 1
60 90 0,2
d 1
54
28
M6
EC-SYSTEMS 35
Terminal box p. 562 Electr. connections p. 596 f.
75 0,1
224
350
45
20
37
g b
Capacitor p. 560 f.
Contacts
Technology
Accessories
85
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal fans
backward curved, 250
Material: Impeller: Sheet steel, coated in black Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 250
subject to alterations
VAC 1~ 230
Hz 50
m3/h 1780
rpm 2650
W 185
A 0.81
dB(A) 72
C -25 to +50
p. 596 f. A1)
Curves
[Pa] [in H O] A A 1 2
400
1,5 2 A
300
1,0
200
100
0,5
250
500
750
1000
[CFM] [m3/h] 60 Hz
400
800
1200
1600
50 Hz
36
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 3.1
96359-2-4013
58 0,2 31
28
97,5 0,5
270,1
0 45
6
Brass lead tips
60 92
2 M4
Depth of screw max. 5 mm
37
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
85
EC-SYSTEMS
222
27
90
EC centrifugal, forward
1411
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal fans
backward curved, 270
Material: Impeller: Sheet steel Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 270
subject to alterations
Hz 50 60
W 280 430
A 1.23 1.88
dB(A) 77 80
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
2665 2690
700
2,5
600
500
2,0
400
1,5
300
1,0
200
0,5
100
250
500
750
1000
1250
1500
[CFM] [m3/h] 60 Hz
600
1200
1800
2400
50 Hz
38
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Capacitor: FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: CCC
kg 4.7
96360-2-4013
90 0,2 35
31
129 0,5
75 0,1
0 45
6
Brass lead tips
70 102
2 M6
Depth of screw max. 10 mm
39
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
85
EC-SYSTEMS
240
37
90
EC centrifugal, forward
1711
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal fans
backward curved, 280
Material: Impeller: Sheet steel, galvanised Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2D 280
subject to alterations
Hz 50 50
W 210 160
A 0.37 0.25
F/VDB
dB(A) 79 75
p. 596 f. F1a)/F2a)
Curves
[Pa] [in H O] A A B B 1 2 1 2
2
700
2,5
600
500
2,0
400
1,5 A
300
1,0
200
0,5
B 1 1
100
250
500
750
[CFM]
400
800
1200
50 Hz
1600
[m3/h] 60 Hz
40
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 4.6
96360-2-4013
125 1
35 90 0,2
EC centrifugal, forward 41
Inlet nozzle p. 550 Terminal box p. 562 Electr. connections p. 596 f.
117 1
31
M6
90 0,1
182,5
280
48
45
85
50 81,6
Contacts
Technology
Accessories
EC-SYSTEMS
20
37
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE
General information
AC centrifugal fans
backward curved, 280
Material: Impeller: Sheet steel, coated in black Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: A "F", B "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R2E 280 R4E 280
subject to alterations
Hz 50 50 60
W 225 78 105
dB(A) 76 62 67
Curves
[Pa] [in H O] A A B B 1 2 1 2
2
700
2,5
600
500
2,0
400
1,5 A
300
1,0
200
0,5
B 2 1
100
1
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
42
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: A variable, B axial Protection class: I Capacitor: A FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
Dimensions
b 81.6 111.4 d 97.5 82.5 e 42.0 35.0 g 50.0 80.0
Inlet nozzle (long)
kg 3.0 2.8
96360-2-4013 96360-2-4013
58 0,2
270,1
2 182,5 e
45
0 6
g b 2
43
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
M4
EC-SYSTEMS
92 191
280
280
27
90
EC centrifugal, forward
125 1 d 0,5
35
31
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal fans
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 310 (1) R4D 310 (1)
subject to alterations
Hz 50 60 50 60
F/VDB
dB(A) 62 66 60 63
n [rpm]
A A B 1 2 1 2
400
1,5
350
300
250
200
1,0
150
0,5
100
50
250
500
750
1000
1250
[CFM] [m3/h]
400
800
1200
1600
2000
50 Hz
60 Hz
44
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c g 70.0
Inlet nozzle (long) Inlet nozzle (short)
kg 3.3 3.4
104.0 123.0
31050-2-4013 31050-2-4013
31051-2-4013 31051-2-4013
c 1
48 58 0,2
2
27 0,1
97,5 0,5
18
EC-SYSTEMS 45
Inlet nozzle p. 550 Guard grille p. 553 Terminal box p. 562 Electr. connections p. 596 f.
208,1
92 220
318
211
300
6 450
2 g b M4
Accessories Contacts Technology
Brass lead tips
27
90
42
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
55,5
AC centrifugal fans
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: A "B", B "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 310 R4E 310
subject to alterations
Hz 50 60 50 60
dB(A) 62 66 59 62
400
350
300
250
1,0
200
2 2
150
0,5
100
1 B
50
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
46
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c g 70.0
Inlet nozzle (long) Inlet nozzle (short)
kg 3.3 3.4
104.0 123.0
31050-2-4013 31050-2-4013
31051-2-4013 31051-2-4013
c 1
48 58 0,2
2 27 0,1
97,5 0,5
18
EC-SYSTEMS 47
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
208,1
92 220
318
211
300
6 450
2 g b M4
Accessories Contacts Technology
Brass lead tips
27
90
42
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
55,5
AC centrifugal fans
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6E 310 R6E 310
subject to alterations
Hz 50 60 50 60
W 45 55 48 60
dB(A) 51 55 50 53
n [rpm]
A A B B 1 2 1 2
P1 [W] 46 50 53 51
150
0,5
100
50
0,25
250
500
750
[CFM]
200
400
600
800
1000
1200
1400
50 Hz
[m3/h] 60 Hz
48
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c g 70.0
Inlet nozzle (long) Inlet nozzle (short)
kg 3.3 3.4
104.0 123.0
31050-2-4013 31050-2-4013
31051-2-4013 31051-2-4013
c 1
48 58 0,2
2 27 0,1
97,5 0,5
18
EC-SYSTEMS 49
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
208,1
92 220
318
211
300
6 450
2 g b M4
Accessories Contacts Technology
Brass lead tips
27
90
42
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
55,5
AC centrifugal fans
backward curved, 3-D, 355
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 355 R4E 355 R4E 355
subject to alterations
Hz 50 60 50 60 50
dB(A) 65 69 66 69 66
C -25 to +70 -25 to +65 -25 to +60 -25 to +35 -25 to +50
500
400
300
1,0 2 2 C
200
B A 0,5
100
500
1000
1500
[CFM]
500
1000
1500
2000
2500
3000
50 Hz
[m3/h] 60 Hz
50
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c d e 48.0 48.0 g 96.0 96.0
Inlet nozzle (long) Inlet nozzle (short)
Centrifugal fan R4D 355-AH11 -05 R4E 355-AK05 -05 R4E 355-AL02 -05
60.0 120.5
c 1
60
5 75 0,1
d 1
44
22 ,5
236,4
102
240
350
250
360
e
2 0
45
37
2
Brass lead tips
g b
Technology 51
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Accessories
85
EC-SYSTEMS
90 0,2 M6
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: A design with thermal overload protector, Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
70
AC centrifugal fans
backward curved, 3-D, 355
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6E 355 R6E 355
subject to alterations
Hz 50 60 50 60
W 65 85 70 90
dB(A) 54 57 52 53
P1 [W] 71 73 80 78
200
0,8
160
0,6
120
0,4 2 2
80
0,2
40
250
500
750
1000
[CFM] [m3/h] 60 Hz
400
800
1200
1600
50 Hz
52
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b c g 96.0
Inlet nozzle (long) Inlet nozzle (short)
kg 3.5 4.1
146.5 167.0
35560-2-4013 35560-2-4013
35561-2-4013 35561-2-4013
5 75 0,1
104 1
44
22
,5
90 0,2 M6
236,4
102
240
350
250
360
35
2 0
85
45
2
Brass lead tips
g b
53
Inlet nozzle p. 550 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
37
EC centrifugal, forward
c 1
60
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST
General information
70
AC centrifugal fans
backward curved, 3-D, 400
Material: Impeller: Sheet aluminium, joined by tabs Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: A "F", B "B" Mounting position: A any, B shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes: A none, B rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 400 R6E 400
subject to alterations
Hz 50 50 60
dB(A) 68 62 64
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
400
1,5
300
1,0
200
2 0,5
B 1
100
500
1000
1500
[CFM]
500
1000
1500
2000
2500
3000
50 Hz
[m3/h] 60 Hz
54
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 5.2 5.2
54476-2-4013 54476-2-4013
5 75 0,1
117 1
22
50
90
90 0,2 M6
102
404
257
370
268
48
2 0
85
45
2
Brass lead tips
91 142
55
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
37
EC centrifugal, forward
162 1
66
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, B also GOST
General information
AC centrifugal fans
backward curved, 3-D, 400
Material: Impeller: Sheet aluminium, joined by tabs Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 400 R4E 400
subject to alterations
Hz 50 60 50 60
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
Electr. connection
P1 [W] 370 331 469 430
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 64 65 66 68
2,5
600
500
2,0
400
1,5
300
1,0
200
0,5
1 B A
100
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
56
Dimensions
b c d e 50.0 g 90.0
Inlet nozzle (long)
kg 7.1 8.8
54476-2-4013 54476-2-4013
70.0 113.0
d 1
22
50
11
90
100 -0,4
45
2 g
60
M6
b
Mounting dimensions
55
28
57
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
EC-SYSTEMS
11 5 10 0
124
404
257
370
268
EC centrifugal, forward
c 1
66
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
,3 0
AC centrifugal fans
backward curved, 400
Material: Impeller: Sheet aluminium, riveted Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type Motor
VAC
A
Hz 50 50 60 60
F/VDB
p. 596 f.
R4D 400
subject to alterations
M4D 094-HA
B C D
3~ 3~ 3~ 3~
F1a)/F2a)
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
Electr. connection
P1 [W] 490 500 380 281
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 63 65 70 66
600
500
400
1,5 C 2 2
300
1,0 B D A
200
2,0
100
0,5 0
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
58
Centrifugal fan
kg
8.7
54476-2-4013
5,5
148 2
22
11
90
265,5
404
257
370
124
70
45
60
M6
4
Brass lead tips
140 188
Mounting dimensions
55
28
59
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
EC-SYSTEMS
11 5 10 0
100 -0,4
EC centrifugal, forward
218 2
66
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
50
5
,3 0
AC centrifugal fans
backward curved, 400
Material: Impeller: Sheet aluminium, riveted Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 400 R6E 400
subject to alterations
Hz 50 60 50 60
Curves
[Pa] [in H O] A A B B 1 2 1 2
2
Electr. connection
P1 [W] 464 462 149 143
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 68 65 56 54
600
500
2,0
400
1,5 2
300
1,0
200
B 2 0,5
100
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
60
Dimensions
d 148.0 128.0 e 70.0 50.0
Inlet nozzle (long)
kg 8.7 8.7
54476-2-4013 54476-2-4013
5,5
d 2
22
11
90
265,5
404
257
370
124
45
60
M6
4
Brass lead tips
140 188
Mounting dimensions
55
28
61
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
EC-SYSTEMS
11 5 10 0
100 -0,4
EC centrifugal, forward
218 2
66
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
50
5
,3 0
AC centrifugal fans
backward curved, 3-D, 450
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 450 (2)
subject to alterations
VAC
Hz
rpm 1350
kW
F/VDB
C -40 to +80
p. 596 f. D1)/D2)
3~ 230/400 50
0.74 2.60/1.50
Curves
[in H O] [Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1370 1350 1380 1155 1115 1180 1055 955 1100 830 780 850
Electr. connection
P1 [kW] 0.65 0.73 0.61 0.47 0.51 0.45 0.37 0.38 0.32 0.26 0.27 0.25
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 2.35/1.35 2.50/1.45 2.25/1.30 2.40/1.40 2.60/1.50 2.25/1.30 2.45/1.40 2.60/1.50 2.25/1.30 2.25/1.30 2.25/1.30 2.15/1.25
LwA [dB(A)] 75 70 76 70 65 72 68 61 70 61 56 63
500
2,0
3 A A A
400
1,5 6
A A
A A 5
300
1,0
A
12
A 8
200
11
1 0,5 4 7
10
100
1000
2000
3000
1000
2000
80/140 V
3000
100/180 V
4000
130/230 V
5000
62
kg 12.5
63045-2-4013
2342 5,5 75
5
0. 3
45
28
87
49
289 284,5
455
300 485
100
450
M6
Depth of screw max. 12 mm
130
28
63
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
140 209
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 3-D, 450
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4E 450
subject to alterations
VAC 1~ 230
Hz 50
rpm 1250
kW 0.68
A 3.00
F/VDB
p. 596 f. A2a)
Curves
[in H O] [Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1300 1265 1320 970 900 1040 720 670 790 545 510 580
Electr. connection
P1 [kW] 0.65 0.68 0.62 0.43 0.43 0.41 0.29 0.29 0.29 0.19 0.19 0.19
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 2.80 3.00 2.68 2.80 2.90 2.71 2.40 2.49 2.41 2.00 2.00 2.00
LwA [dB(A)] 74 69 75 65 60 69 61 53 62 50 47 54
500
2,0
A 3 A A
400
1,5 2 6
A A A
300
1,0
A A A
200
5 1
0,5
12
100
11
8 4 7
10
1000
2000
3000
1000
2000
105 V
3000
130 V
4000
5000
160 V
64
kg 12.5
63045-2-4013
2342 5,5 75
5
0. 3
45
28
87
49
289 284,5
455
300 485
100
450
M6
Depth of screw max. 12 mm
130
28
65
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
140 209
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 3-D, 450
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 450 (2)
subject to alterations
VAC
Hz
rpm 930
kW
F/VDB
C -40 to +85
p. 596 f. D1)/D2)
3~ 230/400 50
0.29 1.30/0.75
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 0.25 0.28 0.26 0.18 0.20 0.18 0.15 0.16 0.15 0.11 0.11 0.11
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 1.12/0.65 1.15/0.66 1.12/0.65 0.92/0.53 1.00/0.58 0.94/0.54 0.94/0.54 1.01/0.58 0.95/0.55 0.90/0.52 0.94/0.54 0.90/0.52
LwA [dB(A)] 66 63 65 61 58 60 58 54 58 52 48 52
950 940 950 830 805 825 735 705 730 615 580 610
250
1,0
A 3 A A
200
0,75 6
A A 2 A A 9
150
0,5 5
A A
100
12
8 1
0,25
11
4 7
10
50
500
1000
1500
2000
2500
1000
80/140 V
2000
100/180 V
3000
130/230 V
4000
66
kg 10.0
63045-2-4013
2342 5,5 75
5
0. 3
45
28
87
49
289 284,5
455
300 485
100
450
M6
Depth of screw max. 12 mm
130
28
67
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
140 209
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 3-D, 450
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6E 450
subject to alterations
VAC 1~ 230
Hz 50
rpm 930
kW 0.30
A 1.42
F/VDB
p. 596 f. A2a)
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 0.27 0.29 0.27 0.21 0.22 0.19 0.17 0.18 0.16 0.12 0.12 0.12
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 1.30 1.38 1.28 1.30 1.40 1.20 1.41 1.50 1.39 1.30 1.38 1.30
LwA [dB(A)] 65 61 67 62 59 64 58 53 61 48 44 52
945 935 945 865 840 880 740 665 775 520 465 565
250
1,0
A A
A A A
200
0,75 2 9
A 5 A
150
0,5
A 8 A
100
12
1 0,25 4
11
50
10
500
1000
1500
2000
2500
1000
2000
105 V
3000
130 V
4000
160 V
68
kg 10.0
63045-2-4013
2342 5,5 75
5
0. 3
45
28
87
49
289 284,5
455
300 485
100
450
M6
Depth of screw max. 12 mm
130
28
69
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
140 209
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 450
Material: Impeller: Sheet aluminium, riveted Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 450 R4E 450 R6E 450
subject to alterations
Hz 50 50 50 50 60
F/VDB
-40 to +50 -40 to +55 10.0 /400 -40 to +50 10.0 /400 -40 to +40 10.0 /450 -40 to +55
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2 1 2 1 2
Electr. connection
P1 [W] 610 650 470 350 602 596 305 310
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 70 69 64 68 69 68 61 58
500
2,0
B A C C C 2 2 D B D
400
1,5
300
1,0 D
200
0,5
100
500
1000
1500
2000
2500
[CFM]
1000
2000
3000
4000
[m3/h]
70
Dimensions
b c g
Inlet nozzle (long)
Centrifugal fan R4D 450-AD22 -06 R4E 450-AB09 -06 R6E 450-AB06 -06
c 2
71
5,5
148 2
25
11
100
454
124
287
413
298
70
45
60
M6
Accessories 71 Contacts Technology
4
Brass lead tips
g b
Mounting dimensions
4x90
55
28
Capacitor p. 560 f.
EC-SYSTEMS
100 -0,4
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
55
11 10 0
5
,3 0
5
AC centrifugal fans
backward curved, 3-D, 500
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 500(2)
subject to alterations
VAC
Hz
rpm 1375
kW
F/VDB
C -40 to +80
p. 596 f. D1)/D2)
3~ 230/400 50
1.43 5.20/3.00
Curves
[Pa] [in H O] A A A A A 2,5 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1380 1375 1375 1150 1125 1140 970 945 970 775 755 775
Electr. connection
P1 [kW] 1.36 1.42 1.43 0.97 1.00 0.97 0.73 0.74 0.73 0.49 0.49 0.49
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 4.99/2.88 5.13/2.96 5.20/3.00 5.25/3.03 5.42/3.13 5.28/3.05 5.18/2.99 5.30/3.06 5.16/2.98 4.66/2.69 4.73/2.73 4.68/2.70
LwA [dB(A)] 81 79 77 76 74 73 71 69 68 64 63 62
700
600
3
A A A A 2 A A A
500
400
1,5 6
2,0
300
1,0 9
A 1
200
12
8 4 0,5
11 10
100
1000
2000
3000
4000
1000
2000
3000
80/140 V
4000
5000
6000
7000
100/180 V
130/230 V
72
kg 26.0
63072-2-4013
2492 5,5 75
162
28
87
49
0. 3
22,5
8x 45
480 140
355 505
342 337
470
1000
M10
Depth of screw max. 18 mm
73
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
Accessories
175 233
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
AC centrifugal fans
backward curved, 3-D, 500
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 500(2)
subject to alterations
VAC
Hz
rpm 910
kW
F/VDB
C -40 to +80
p. 596 f. D1)/D2)
3~ 230/400 50
0.48 1.90/1.10
Curves
[in H O] [Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 915 910 915 760 745 770 650 630 665 530 510 545
Electr. connection
P1 [kW] 0.45 0.47 0.44 0.31 0.32 0.30 0.23 0.24 0.23 0.16 0.16 0.16
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 1.73/1.00 1.77/1.02 1.69/0.98 1.66/0.96 1.72/1.00 1.60/0.93 1.59/0.92 1.64/0.95 1.57/0.90 1.43/0.82 1.45/0.84 1.41/0.81
LwA [dB(A)] 68 65 66 62 60 61 57 55 57 52 49 52
250
1,0
A A A
200
0,75 6
A A A
150
9 0,5 5 1
A A A
100
8
12
4
11
50
0,25
7
10
1000
2000
3000
1000
2000
80/140 V
3000
100/180 V
4000
130/230 V
5000
74
kg 13.0
63072-2-4013
2452 5,5 75
5
0. 3
45
28
87
49
355 505
342 337
480
100
470
M6
Depth of screw max. 12 mm
130
28
75
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
175 233
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 3-D, 500
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6E 500
subject to alterations
VAC 1~ 230
Hz 50
rpm 910
kW 0.51
A 2.34
F/VDB
p. 596 f. A2a)
Curves
[Pa] [in H O]
2
n [rpm]
A A A A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 0.49 0.51 0.48 0.37 0.38 0.37 0.27 0.27 0.27 0.17 0.17 0.17
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 2.24 2.33 2.22 2.55 2.64 2.50 2.35 2.37 2.34 1.94 1.94 1.94
LwA [dB(A)] 70 67 68 62 60 61 52 49 52 46 44 45
915 910 915 720 690 730 515 485 510 370 355 375
300
250
1,00
A A
200
0,75
A A A
150
1 0,50 5
A A
100
9 0,25 8
12 11 10
50
1000
2000
3000
4000
2000
105 V
4000
130 V
6000
160 V
76
kg 13.0
63072-2-4013
2452 5,5 75
5
0. 3
45
28
87
49
355 505
342 337
480
100
470
M6
Depth of screw max. 12 mm
130
28
77
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
175 233
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 500
Material: Impeller: Sheet aluminium, riveted Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6E 500
subject to alterations
Hz 50 60
W 385 475
A 1.82 2.10
F/VDB
p. 596 f. A2a)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
Electr. connection
P1 [W] 360 376
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 62 57
845 830
300
0,50
0,75
200
1,00
1,25
100
0,25
1000
2000
3000
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
5000
50 Hz
78
kg 11.1
54480-2-4013
270,5 2
79
5,5
148 2
28
11
115
100 -0,4
334,5
504
124
323
520
70
45
60
M6
180 241
Mounting dimensions
55
28
79
Inlet nozzle p. 550 Guard grille p. 553 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
65
11 10 0
5
,3 0
5
AC centrifugal fans
backward curved, 3-D, 560
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 560 (2)
subject to alterations
VAC
Hz
rpm 1365
kW
F/VDB
C -40 to +60
p. 596 f. D1)/D2)
3~ 230/400 50
2.38 8.66/5.00
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 2.14 2.33 2.34 1.53 1.62 1.62 1.13 1.17 1.17 0.77 0.78 0.78
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 8.33/4.81 8.66/5.00 8.66/5.00 8.31/4.80 8.75/5.05 8.73/5.04 8.11/4.68 8.42/4.86 8.38/4.84 7.31/4.22 7.45/4.30 7.47/4.31
LwA [dB(A)] 84 82 81 77 76 75 74 73 71 70 67 65
1380 1370 1365 1140 1110 1105 955 920 915 765 735 730
800
3,0
A A
700
2,5
A 3 A A
600
500
2,0
A 2 A A A
300
1,0 9
1,5
400
5 1 8
12
200
0,5
11 10
4 7
100
2000
4000
6000
[CFM]
3000
80/140 V
6000
100/180 V
9000
12000
130/230 V
[m3/h] 230/400 V
80
kg 28.0
63071-2-4013
2742 5,5 82
30
95
60
540 140
398 565
385 380
515
1000
M10
Depth of screw max. 18 mm
81
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
Accessories
195 258
EC-SYSTEMS
EC centrifugal, forward
162
0.
22,5
8x 45
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
AC centrifugal fans
backward curved, 3-D, 560
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 560 (2)
subject to alterations
VAC
Hz
rpm 885
kW
F/VDB
C -40 to +55
p. 596 f. D1)/D2)
3~ 230/400 50
0.78 2.95/1.70
Curves
[Pa] [in H O] A A A A A 1,25 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 905 890 890 665 610 605 595 560 565 480 450 450
Electr. connection
P1 [kW] 0.68 0.76 0.76 0.48 0.49 0.49 0.32 0.33 0.33 0.21 0.21 0.18
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 2.71/1.56 2.87/1.65 2.85/1.64 2.85/1.64 2.89/1.67 2.88/1.66 2.31/1.34 2.40/1.39 2.39/1.38 1.99/1.15 2.03/1.17 2.03/1.17
LwA [dB(A)] 71 69 69 68 58 59 65 58 57 54 50 50
350
300
3 1,0
A A A A 2 A A A
250
0,75
200
150
0,5 9
A 6 1 5 8
12
100
0,25
4
11 10
50
1000
2000
3000
4000
[CFM]
1000
2000
3000
80/140 V
4000
5000
6000
7000
8000
[m3/h]
100/180 V
130/230 V
230/400 V
82
kg 15.0
63071-2-4013
2702 5,5 82
5
0. 3
45
30
95
60
398 565
385 380
540
100
515
M6
Depth of screw max. 12 mm
130
28
83
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
4x90
Accessories
195 258
EC-SYSTEMS
80
EC centrifugal, forward
11
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
4x90
11 5 0 10
AC centrifugal fans
backward curved, 3-D, 630
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 20 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 630 (2)
subject to alterations
VAC
Hz
rpm 1300
kW
F/VDB
C -40 to +60
p. 596 f. D1)/D2)
3~ 230/400 50
4.25 13.10/7.55
(2) 230 VAC / 400 VAC Y
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 3.93 4.21 3.55 2.30 2.36 2.19 1.50 1.54 1.46 0.94 0.94 0.93
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 12.33/7.12 13.01/7.51 11.19/6.46 12.85/7.42 13.10/7.55 12.13/7.01 11.32/6.53 11.49/6.63 11.03/6.37 9.47/5.47 9.54/5.51 9.34/5.39
LwA [dB(A)] 84 82 86 76 74 78 70 69 71 63 61 64
1325 1300 1340 960 930 1005 745 725 785 575 550 610
1000
4,0
A A 3 A A A 2 A A
800
3,0
600
2,0
A 6 A
400
1 5 9 1,0
200
12 11
8 7
10
2500
5000
7500
10000
4000
80/140 V
8000
100/180 V
12000
16000
130/230 V
84
kg 29.0
63070-2-4013
37
14
72
635 140
447 635
433 427
634
1000
M10
Depth of screw max. 18 mm
85
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
Accessories
220 290
EC-SYSTEMS
EC centrifugal, forward
162
0.
22,5
8x 45
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
AC centrifugal fans
backward curved, 3-D, 630
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 630 (2)
subject to alterations
VAC
Hz
rpm 1170
kW
F/VDB
C -40 to +35
p. 596 f. D1)/D2)
3~ 230/400 50
3.31 10.74/6.20
(2) 230 VAC / 400 VAC Y
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
Electr. connection
P1 [kW] 3.11 3.21 2.84 1.42 1.42 1.35 0.93 0.93 0.89 0.59 0.59 0.57
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 10.09/5.83 10.30/5.95 9.18/5.30 8.06/4.65 8.09/4.67 7.65/4.41 6.77/3.91 6.78/3.92 6.52/3.76 5.57/3.22 5.56/3.21 5.40/3.12
LwA [dB(A)] 81 79 83 70 68 72 65 63 66 59 58 60
1170 1145 1200 785 760 830 640 625 685 520 510 550
1000
4,0
A A A
800
3,0 3
A A A
600
2,0
A A 2 A
400
6 1 1,0 9 5
12 11 10
200
8 7
2000
4000
6000
8000
[CFM]
4000
80/140 V
8000
100/180 V
12000
130/230 V
16000
[m3/h]
230/400 V
86
kg 31.0
63070-2-4013
37
14
72
635 140
447 635
433 427
634
1000
M10
Depth of screw max. 18 mm
87
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
Accessories
220 290
EC-SYSTEMS
EC centrifugal, forward
162
0.
22,5
8x 45
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
AC centrifugal fans
backward curved, 3-D, 630
Material: Impeller: Sheet aluminium, welded Rotor: Cast in aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 630 (2)
subject to alterations
VAC
Hz
rpm 880
kW
F/VDB
C -40 to +60
p. 596 f. D1)/D2)
3~ 230/400 50
1.31 4.85/2.80
Curves
[in H O] [Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 885 885 890 675 675 690 540 535 560 420 415 430
Electr. connection
P1 [kW] 1.28 1.30 1.23 0.82 0.82 0.80 0.57 0.56 0.57 0.36 0.36 0.36
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
I [A] 4.85/2.80 4.82/2.79 4.65/2.69 4.72/2.72 4.75/2.74 4.59/2.65 4.37/2.52 4.35/2.51 4.27/2.46 3.72/2.15 3.74/2.16 3.70/2.14
LwA [dB(A)] 73 73 73 67 67 67 60 60 61 54 54 54
500
2,0
A A A
400
1,5 3
A A A
300
1,0
A A
1 5
200
9 0,5
4 8
100
12 11 10
2000
4000
6000
2000
4000
80/140 V
6000
100/180 V
8000
10000
130/230 V
88
kg 27.0
63070-2-4013
37
14
72
635 140
447 635
433 427
634
1000
M10
Depth of screw max. 18 mm
89
Inlet nozzle p. 550 Guard grille p. 553 Electr. connections p. 596 f.
Contacts
Technology
Accessories
220 290
EC-SYSTEMS
EC centrifugal, forward
162
0.
22,5
8x 45
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
90
AC centrifugal fans and blowers, single inlet AC centrifugal blowers with plastic housing, dual inlet AC centrifugal blowers, dual inlet
92 158 178
91
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *2E 085
subject to alterations
Hz 50 60
m3/h 80 95
W 32 30
A 0.15 0.14
dB(A) 53 57
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 32 30
2430 2590
160
0,6
120
80
0,4
2 A
40
0,2
10
20
30
40
50
[CFM] [m3/h] 60 Hz
20
40
60
80
50 Hz
92
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Capacitor: FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: CCC
kg 0.7
kg 0.9
68 1 571 2
Brass lead tips Depth of screw max. 4 mm
20 17 0,1 59 67 85
470
M4
,1
42
5,5
34,5
68 58
42
3x1
65-1
71,5 54,5
116,5
80
300
93
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
76 66 56 4,5
117,5 60,2 3
20
84
EC-SYSTEMS
M4
300 20
30
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *2E 097
subject to alterations
Hz 50 60
W 35 37
A 0.16 0.17
dB(A) 55 58
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 35 33
2120 2335
200
160
0,6
120
0,4 2
80
0,8
40
1
0,2
20
40
60
[CFM] [m3/h] 60 Hz
20
40
60
80
100
50 Hz
94
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Capacitor: FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: CCC
kg 0.6
kg 1.1
41,5 1 55,9 1 2
Brass lead tips Depth of screw max. 4 mm
M4 20
470
,1
40
143 75
46
3x
56,5
24
120
80
137
75
6 60 300 1
96
95
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
53
18
EC-SYSTEMS
300 20
32
EC centrifugal, forward
170,1
59
79
97
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *2E 108
subject to alterations
Hz 50 60
W 30 35
A 0.14 0.16
dB(A) 56 56
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H2O]
n [rpm]
A A 1 2
P1 [W] 34 31
2070 2470
320
1,2
240
0,8
160
2
80
1
0,4
20
40
60
80
100
[CFM] [m3/h] 60 Hz
40
80
120
160
50 Hz
96
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 0.6
kg 1.3
63 1 54 1 M4
,1
15 108 72 84
58 0
52
M4
83 66
50
118
87-1 168 300
82
97
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
71
Accessories
115 97 76
159 79 4
EC-SYSTEMS
300 20
55
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *2E 120
subject to alterations
Hz 50 60
W 80 100
A 0.35 0.44
dB(A) 61 62
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 77 69
2460 2665
400
1,5
300
1,0
200
100
0,5
25
50
75
100
125
[CFM]
40
80
120
160
200
240
50 Hz
[m3/h] 60 Hz
98
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.2
kg 1.8
83 1 63 1 2
Brass lead tips Depth of screw max. 5 mm
15 270,1 120 92 96
58 0
M4
,1
62
M4
83 68
50
132
100 -1 184 450
98
99
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
86
Accessories
115 100 76
178 82 4
EC-SYSTEMS
450 20
55
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
Nominal data
Type *2E 120 *2E 120
subject to alterations
Hz 50 60 50 60
W 57 66 83 100
dB(A) 63 63 64 63
Pa 0 0 0 0
Curves
[Pa] [in H O] A A B 1 2 1 2
P1 [W] 54 51 80 72
400
1,5
300
1,0
200
A
2
100
1
0,5
25
50
75
100
125
150
[CFM] [m3/h] 60 Hz
40
80
120
160
200
240
50 Hz
100
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
b 42.0 62.0 c 48.0 85.0 Centrifugal blower without flange G2E 120-TD76 -01 Centrifugal blower with flange G2E 120-CR21 -01
Dimensions
A 110.0 B 94.0 C 98.0 D 82.0 F 59.0 77.0 G 6.0 I 60.0 99.0
kg 1.0 1.2
kg 1.3 1.9
c 1 63 1 2
Brass lead tips Depth of screw max. 5 mm
M4 15
58 0
,1
270,1
120
92
96
450 20 b
55
A F 87
67
71
C D
4x90
101
45
180
110
6 85 I 450
101
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
95
Accessories
170,5
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: B CCC
General information
Nominal data
Type *2E 133
subject to alterations
Hz 50 60
W 88 110
A 0.39 0.49
dB(A) 65 65
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O] A A 1 2
P1 [W] 83 73
400
1,5 A
300
1,0
200
100
0,5
25
50
75
100
125
150
[CFM] [m3/h] 60 Hz
40
80
120
160
200
240
50 Hz
102
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.3
kg 1.9
68,5 1 63 1 2
Brass lead tips Depth of screw max. 5 mm
M4 15
58 0
,1
46
170,5 59 87
67
71
4x90
101
45
112
180
140
81 6 85
103
Inlet nozzle p. 552 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
450
Accessories
EC-SYSTEMS
450 20
55
EC centrifugal, forward
270,1
108
133
92
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *2E 140
subject to alterations
Hz 50 60
W 63 70
A 0.29 0.31
dB(A) 55 53
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O] A A 1 2
P1 [W] 62 56
400
1,5 A
300
1,0
200
100
0,5
25
50
75
100
125
150
[CFM] [m3/h] 60 Hz
40
80
120
160
200
240
50 Hz
104
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.4
kg 1.9
37,4
216 62 95
67
71
125,5
137,6
4x90
45
242
158
6 85 62 450
105
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
450 20
55
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE
General information
Nominal data
Type *2E 140
subject to alterations
Hz 50 60
W 105 115
A 0.46 0.51
dB(A) 59 57
Pa 0 50
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 98 89
1700 2100
320
1,2
240
0,8
160
80
0,4
40
80
120
160
200
[CFM] [m3/h] 60 Hz
80
160
240
320
50 Hz
106
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.2
kg 2.6
72 1 63 1 2
Brass lead tips Depth of screw max. 5 mm
58 0
M4
,1
59
M4
120 105
92
158
118 -1
248
450
100
107
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
107
Accessories
6,3
130 115 94
227 103 5
EC-SYSTEMS
450 20
55
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
Nominal data
Type *2E 140 *2E 140
subject to alterations
Hz 50 60 50 60
dB(A) 63 60 72 71
Pa 0 100 0 0
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
500
400
1,5 B
300
1,0 2
200
A
100
0,5
50
100
150
200
250
[CFM] [m3/h] 50 Hz 60 Hz
100
200
300
400
108
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
d 73.0 83.0 e 25.0 35.0 Centrifugal blower with flange G2E 140-AL40 -01 G2E 140-AI28 -01
kg 1.7 2.1
kg 3.0 3.4
72 1 d 1 2
Brass lead tips Depth of screw max. 5 mm
58 0
M4
,1
450 20 59
55
6,3
M4
120 105
92
158
248
100
109
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
118 -1
450
107
Accessories
130 115 94
227 103
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
AC centrifugal blowers
single inlet, 140
Material: Housing: Heat-resistant plastic Impeller: A heat-resistant plastic, B galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type G2E 140 G2E 140
subject to alterations
Hz 50 60 50 60
dB(A) 59 57 65 64
Pa 0 50 0 130
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
500
400
1,5 B
300
1,0 2
200
1 0,5
100
50
100
150
200
[CFM] [m3/h] 50 Hz 60 Hz
100
200
300
110
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Centrifugal blower without flange G2E 140-NS38 -01 G2E 140-NL33 -01
kg 1.6 1.6
237 100
101
95
125,5
22 0,3
6 450 20
Brass lead tips
111
Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
85
EC centrifugal, forward
113 111
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
Nominal data
Type *2E 146
subject to alterations
Hz 50 60
W 140 155
A 0.62 0.68
dB(A) 60 58
Pa 0 100
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
1835 2070
500
2,0
400
1,5
300
1,0 2
200
100
0,5
50
100
150
200
250
[CFM] [m3/h] 60 Hz
100
200
300
400
50 Hz
112
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 1.4
kg 2.6
721 68 1 2
Brass lead tips Depth of screw max. 5 mm
58 0
M4
,1
62
M4
120 105
92
158
125,5 -1 248 450
104
113
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
107
Accessories
6,3
130 115 94
227 101 5
EC-SYSTEMS
450 20
55
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
Nominal data
Type *2E 160 *4E 160
subject to alterations
Hz 50 60 50 60
W 240 280 67 90
dB(A) 72 71 65 67
Pa 0 50 0 0
Curves
[Pa] [in H O] A A B B 1 2 1 2
700
2,5
600
500
2,0
400
1,5
300
1,0
200
0,5
B 2 1 1
100
100
200
300
[CFM] [m3/h] 50 Hz 60 Hz
100
200
300
400
500
114
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
d 91.0 72.0 e 42.0 25.0 Centrifugal blower with flange G2E 160-AY47 -01 G4E 160-AB01 -01
kg 2.6 1.7
kg 3.9 2.9
721 d 1 2
Brass lead tips Depth of screw max. 5 mm
58 0
M4
,1
450 20 62
55
6,3
M4
120 105
92
175
248
100
115
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
130 -1
450
107
Accessories
130 115 94
227 103
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: A variable, B lateral Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type G2E 180 *4E 180
subject to alterations
Hz 50 60 50 60
dB(A) 73 71 65 65
Pa 0 250 0 0
Curves
[Pa] [in H2O] A A B 1 2 1 2
800
3,0 A
600
2,0
400
1 1,0 B
200
2
[CFM] [m3/h] 60 Hz
100
200
300
400
500
600
50 Hz
700
116
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
e 48.0 35.0 Centrifugal blower with flange G2E 180-EH03 -01 G4E 180-AB01 -01
kg 1.7
kg 5.6 3.7
89 1 82 1 2
Brass lead tips Depth of screw max. 5 mm
M4 e
58 0
,1
270,1
149
180
92
450 20 75
55
M4
140 120
110
105
117
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Air filter p. 563 Electr. connections p. 596 f.
Contacts
Technology
150-1
194
123
281
450
Accessories
125 110 86
261 120
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *4D 180 (2) G4D 180 (1)(2)
subject to alterations
Hz 50 60 50 60
F/VDB
dB(A) 67 69 69 70
Pa 0 0 0 0
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
300
250
1,0
1,25
150
0,5
0,75
200
100
0,25
A 1
50
200
400
600
[CFM] [m3/h] 60 Hz
200
400
600
800
1000
50 Hz
118
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
C D E S 90.0
kg 3.2
kg 6.4 6.4
75 0,1
20
92
163 C D S
6x
60
332
149 -1
192
600 136
3,2 155
119
Inlet nozzle p. 552 Guard grille p. 554 Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
129 90
296 133
EC-SYSTEMS
60
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Without thermal protection Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *4E 180 G4E 180 (1)
subject to alterations
Hz 50 60 50 60
dB(A) 66 65 66 64
Pa 0 0 0 50
Curves
[in H O] [Pa]
2
n [rpm]
A A B B 1 2 1 2
300
250
1,0
150
0,5
0,75
200
100
0,25
50
200
400
[CFM]
200
400
600
800
50 Hz
[m3/h] 60 Hz
120
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
C D E S 90.0
kg 3.2
kg 6.4 6.4
75 0,1
20
92
163 C D S
6x
60
332
149 -1
192
600 136
3,2 155
121
Inlet nozzle p. 552 Guard grille p. 554 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
129 90
296 133
EC-SYSTEMS
60
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *4D 200 (2) G4D 200 (1)(2)
subject to alterations
Hz 50 60 50 60
F/VDB
dB(A) 69 69 71 69
Pa 0 100 0 250
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
400
1,5
350
B
300
200
1,0
250
150
0,5
100
A
50
200
400
600
800
[CFM] [m3/h] 50 Hz 60 Hz
400
800
1200
122
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
C D E S 90.0
kg 3.7
kg 7.0 7.0
75 0,1
60 0
20
102
176,5 7
6x
60
C D S
370
175
213
600 151
3,2 160,5
123
Inlet nozzle p. 552 Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
142,5 90
327 146
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Without thermal protection Cable exit: Axial Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
Nominal data
Type *4E 200 G4E 200 (1)
subject to alterations
Hz 50 60 50 60
dB(A) 69 69 70 68
Pa 0 100 0 170
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
400
1,5
B B
350
300
250
200
1,0
150
0,5
100
50
200
400
600
800
[CFM] [m3/h]
400
800
1200
50 Hz
60 Hz
124
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Axial Protection class: I Capacitor: FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: CCC, B also GOST
Dimensions
C D E S 90.0
kg 3.7
kg 7.0 7.0
75 0,1
60 0
20
102
176,5 7
6x
60
C D S
370
175
213
600 151
3,2 160,5
125
Inlet nozzle p. 552 Capacitor p. 560 f. Terminal box p. 562 Electr. connections p. 596 f.
Contacts
Technology
Accessories
142,5 90
327 146
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *4D 225 G4D 225 (2)
subject to alterations
Hz 50 60 50 60
F/VDB
Pa 0 50 0 200
Curves
[Pa] [in H O] A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 71 67 74 69
400
1,5 B
300
1,0
200
A
100
0,5
250
500
750
1000
[CFM] [m3/h] 60 Hz
400
800
1200
1600
50 Hz
126
Dimensions
C D E S 90.0
kg 6.5
kg 9.5 9.7
5,5
137,5 2 128 2
15 1
100 +0,5
195 1
124
60 0
225 2
50
102
176,5 7 E
6x
60
194
60
C D S
370
242
151
127
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
Accessories
142,5 90
327 158
EC-SYSTEMS
45
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Options: B 400 VAC /Y for two speed steps available on request
General information
Nominal data
Type *4E 225 G4E 225 (2)
subject to alterations
Hz 50 60 50 60
Pa 0 100 0 200
Curves
[Pa] [in H O] A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 67 70 74 69
400
1,5 B
300
1,0
200
A
0,5
100
250
500
750
1000
[CFM] [m3/h] 60 Hz
400
800
1200
1600
50 Hz
128
Dimensions
C D E S 90.0
kg 6.6
kg 9.6 9.8
5,5
137,5 2 128 2
15 1
100 +0,5
195 1
124
60 0
225 2
50
102
176,5 7 E
6x
60
194
60
C D S
370
242
151
129
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
142,5 90
327 158
EC-SYSTEMS
45
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
Nominal data
Type *4D 250 G4D 250 (2)
subject to alterations
Hz 50 60 50 60
F/VDB
Pa 0 150 0 300
Curves
[Pa] [in H O] A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 72 70 76 71
500
2,0
400
1,5
300
1,0
200
A 1 0,5 1
100
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
1000
1600
2200
50 Hz
130
Dimensions
C D E S U
kg 9.7
kg 13.1 13.5
90.0 198.0
5,5
175,5 2 148 2
15 1
100 +0.5
192 1
60 0
2402
124
70
140
387
C U D S
207
6x6
200
275
173
131
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
60
392
Accessories
194
EC-SYSTEMS
45
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Options: 400 VAC /Y for two speed steps available on request
General information
Nominal data
Type *4E 250 G4E 250(2)
subject to alterations
Hz 50 60 50 60
Pa 0 100 0 220
Curves
[Pa] [in H O] A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 70 68 73 69
500
2,0
400
1,5
300
1,0
200
1 0,5 A 1
100
250
500
750
1000
1250
[CFM] [m3/h] 60 Hz
400
1000
1600
2200
50 Hz
132
Dimensions
C D E S U
kg 9.3
kg 12.7 13.1
90.0 198.0
5,5
175,5 2 148 2
15 1
100 +0.5
192 1
60 0
2402
124
70
140
387
C U D S
207
6x6
200
275
173
133
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
60
392
Accessories
194
EC-SYSTEMS
45
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
Nominal data
Type *6E 250 G6E 250 (2)
subject to alterations
Hz 50 60 50 60
Pa 0 0 0 0
Curves
[Pa] [in H O] A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 63 61 65 62
200
0,75 B
150
0,5
100
A
0,25
50
250
500
750
1000
[CFM] [m3/h] 60 Hz
400
800
1200
1600
50 Hz
134
Dimensions
C D E S U
kg 7.0
kg 10.5 10.9
90.0 198.0
5,5
175,5 2 128 2
15 1
100 +0.5
192 1
60 0
2402
124
50
140
387
C U D S
207
6x6
200
275
173
135
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
60
392
Accessories
194
EC-SYSTEMS
45
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
AC centrifugal fans
single inlet, 250
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 250 (2) R4E 250
subject to alterations
VAC
Hz
kW
F/VDB
Pa 0 0
3~ 230/400 50 1~ 230 50
12.0 /450
Curves
[Pa] [in H O]
2
n [rpm]
A A 2 2 B B 1 2 1 2
Electr. connection
I [A] 2.48/1.43 2.23/1.29 2.14 1.49
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 77 70 76 70
350
300
1,2
1,4
250
1,0
B 1
200
0,8
150
100
50
0,2 0
0,4
0,6
250
500
750
1000
1250
[CFM] [m3/h]
400
800
1200
1600
2000
136
kg 12.0 12.0
Inlet nozzle
Flange
25010-2-4013 25010-2-4013
94250-2-4017 94250-2-4017
4x90
7 M6
240
249
100 1150,3
2 85
Depth of screw max. 12 mm
Housing width
2851 300
Accessories
Mounting dimensions
7 130 28
7
203
287
6x60
30
230
138
30
18
147
213
30
198
30 30
158
184
30
4x90
247
30
65
25
137
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 5 10 0
800
193 300
EC centrifugal, forward
50-2
6x60
EC centrifugal, backward
AC centrifugal, forward
267
30
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
170
AC centrifugal fans
single inlet, 250
Material: Impeller: Galvanised sheet steel Rotor: A cast in aluminium, B coated in black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: A on rotor and stator sides, Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
none
Nominal data
Type R6D 250 (2) R6E 250
subject to alterations
VAC
Hz
kW
Pa 0 0
3~ 230/400 50 1~ 230 50
Curves
[Pa] [in H2O] A A A B B 0,6 B 2 2 1 2 1 2
Electr. connection
I [A] 1.18/0.68 1.11/0.64 1.00 0.81
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 68 63 67 62
160
120
0,4
80
11 0,2
40
A
200
400
600
800
[CFM] [m3/h]
200
400
600
800
1000
1200
1400
138
Dimensions
l 800.0 600.0
Inlet nozzle Flange
kg 9.5 7.0
25010-2-4013 25010-2-4013
94250-2-4017 94250-2-4017
4x90
7 M6
240
249
100 1150,3
2 85
Depth of screw max. 12 mm
Housing width
2851 300
Accessories
B
7
203
6x60
Mounting dimensions
Mounting dimensions
7
287
30
4x90
213
198
30 30
158
28 28
184
30
130
230
138
30
18
147
55
30
4x90
247
30
65
25
139
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 11 5 5 10 10 0 0
193 300
EC centrifugal, forward
50-2
6x60
EC centrifugal, backward
AC centrifugal, forward
267
30
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: A VDE (acc. to EN 60034)
General information
30
170
Nominal data
Type *4E 280
subject to alterations
Hz 50 60
W 1080 990
A 5.30 4.70
Pa 100 400
p. 596 f. A2a)
Curves
[Pa] [in H O] A A 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 73 73
800
3,0
600
2,0
400
1 1,0
200
200
400
600
800
1000
1200
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
140
kg 10.2
kg 14.0
5,5
149,5 2 148 2
15 1
234 1
60 0
2802
124
70
114
45
412
236
315
5x6
172
3,5
175
141
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
60
444
Accessories
190
EC-SYSTEMS
EC centrifugal, forward
100 +0.5
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE
General information
AC centrifugal fans
single inlet, 280
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 280 (2) R4E 280
subject to alterations
VAC
Hz
kW
F/VDB
Pa 0 100
3~ 230/400 50 1~ 230 50
16.0 /450
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 2 1 2 1 2
Electr. connection
I [A] 3.79/2.19 3.29/1.90 3.59 2.34
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 77 72 76 72
600
500
2,0
2,4
400
1,6
B 1 1
300
200
100
0,4 0
0,8
1,2
500
1000
1500
[CFM]
500
1000
1500
2000
2500
3000
[m3/h]
142
kg 14.5 14.5
Inlet nozzle
Flange
28010-2-4013 28010-2-4013
10280-2-4017 10280-2-4017
4x90
7 M6
280
296
100 1150,3
3 15
Depth of screw max. 12 mm
Housing width
3151 336
Accessories
Mounting dimensions
7 130 28
7
205
266
6x60
30
218
162
30
13
152
200
30
183
30 30
148
172
30
4x90
236
30
65
143
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 5 10 0
800
228 336
EC centrifugal, forward
57-2
6x60
EC centrifugal, backward
AC centrifugal, forward
254
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
161
AC centrifugal fans
single inlet, 280
Material: Impeller: Galvanised sheet steel Rotor: A cast in aluminium, B coated in black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: A on rotor and stator sides, Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
none
Nominal data
Type R6D 280 (2) R6E 280
subject to alterations
VAC
Hz
kW
F/VDB
Pa 0 0
3~ 230/400 50 1~ 230 50
12.0 /450
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
Electr. connection
I [A] 1.30/0.75 1.16/0.67 1.60 1.37
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 66 61 66 61
300
250
1,0
1,25
2 2 A 0,75
200
B 1
150
0,5
100
0,25
50
400
800
1200
[CFM] [m3/h]
400
800
1200
1600
2000
144
Dimensions
l 800.0 600.0
Inlet nozzle Flange
kg 10.0 9.5
28010-2-4013 28010-2-4013
10280-2-4017 10280-2-4017
4x90
7 M6
280
296
100 1150,3
3 15
Depth of screw max. 12 mm
Housing width
3151 336
Accessories
B
7
205
6x60
Mounting dimensions
Mounting dimensions
7
266
30
4x90
200
183
30 30
148
28 28
172
30
130
218
162
30
13
152
55
30
4x90
236
30
65
145
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 11 5 5 10 10 0 0
228 336
EC centrifugal, forward
57-2
6x60
EC centrifugal, backward
AC centrifugal, forward
254
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: A VDE (acc. to EN 60034)
General information
30
30
161
AC centrifugal fan
single inlet, 310
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 310 (2)
subject to alterations
VAC
Hz
rpm 1310
kW
F/VDB
Pa 0
C -25 to +55
p. 596 f. D1)/D2)
3~ 230/400 50
2.18 6.75/3.90
Curves
[Pa] [in H O] A A A 1 2
2
Electr. connection
I [A] 6.29/3.63 4.43/2.56
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 82 77
600
500
400
300
200
0,8
1,2
1,6
2,0
100
0,4 0
500
1000
1500
2000
2500
[CFM] [m3/h]
1000
2000
3000
4000
146
kg 24.5
Inlet nozzle
Flange
31010-2-4013
38310-2-4017
8x45 M10
6x60
9
315
257 374
327
1000
Z 4 2031
Housing width
421
Brass lead tips
140
50
1
9
249
349
6x60
30
303
283
30
65
176
30
18
186
264
30
246
30 30
200
229
30
147
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
Accessories
1620,3
3501 374
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
325
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
214
AC centrifugal fans
single inlet, 310
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 310 (2) R6E 310
subject to alterations
VAC
Hz
kW
F/VDB
Pa 50 0
3~ 230/400 50 1~ 230 50
16.0 /400
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 2 2 1 2 1 2
Electr. connection
I [A] 2.25/1.30 1.75/1.01 2.81 2.32
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 72 67 70 65
300
250
200
0,8
1,0
1,2
1 A
150
0,6
B 1
100
50
0,2 0
0,4
250
500
750
1000
1250
1500
1750
[CFM] [m3/h]
500
1000
1500
2000
2500
3000
148
kg 12.5 15.0
Inlet nozzle
Flange
31010-2-4013 31010-2-4013
10310-2-4017 10310-2-4017
4x90
9 M6
315
327
100 1150,3
3 50
Depth of screw max. 12 mm
Housing width
3501 374
Accessories
Mounting dimensions
7 130 28
9
249
349
6x60
30
283
176
30
18
186
264
30
246
30 30
200
229
30
4x90
303
30
65
149
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 5 10 0
800
257 374
EC centrifugal, forward
61-2
6x60
EC centrifugal, backward
AC centrifugal, forward
325
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
214
AC centrifugal fan
single inlet, 355
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 20 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 355 (2)
subject to alterations
VAC
Hz
rpm 1300
kW
F/VDB
Pa 0
C -25 to +70
p. 596 f. D1)/D2)
3~ 230/400 50
4.36 13.75/7.95
Curves
[Pa] [in H O] A 2 A A 1 2
2
Electr. connection
I [A] 10.58/6.11 7.52/4.34
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 86 80
800
700
600
500
2,0
2,4
2,8
400
300
200
100
0,4 0
0,8
1,2
1,6
1000
2000
3000
4000
[CFM] [m3/h]
1000
2000
3000
4000
5000
6000
7000
150
kg 28.0
Inlet nozzle
Flange
35510-2-4013
38355-2-4017
8x45 M10
6x60
9
355
372
289 413
1000
Z 5 2281
Housing width
421
Brass lead tips
140
90
1
9
280
389
6x60
30
338
315
30
65
196
30
18
207
294
30
274
30 30
222
256
30
151
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
Accessories
1620,3
3901 413
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
362
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
238
AC centrifugal fans
single inlet, 355
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: On rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 355 (2) R6E 355
subject to alterations
VAC
Hz
kW
F/VDB
Pa 250 175
3~ 230/400 50 1~ 230 50
16.0 /400
Curves
[Pa] [in H O]
2
n [rpm]
A A B 2 2 1 B 1 2 1 2
Electr. connection
I [A] 2.82/1.63 2.44/1.41 3.90 2.90
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 70 68 70 67
400
300
1,2
A B
200
0,8
100
0,4 0
500
1000
1500
2000
2500
[CFM] [m3/h]
1000
2000
3000
4000
152
kg 15.5 15.5
Inlet nozzle
Flange
35510-2-4013 35510-2-4013
10355-2-4017 10355-2-4017
4x90
9 M6
355
372
100 1150,3
3 90
Depth of screw max. 12 mm
Housing width
3901 413
Accessories
Mounting dimensions
7 130 28
9
280
389
6x60
30
315
196
30
18
207
294
30
274
30 30
222
256
30
4x90
338
30
65
153
Inlet nozzle p. 552 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
EC-SYSTEMS
11 5 10 0
800
289 413
EC centrifugal, forward
70-2
6x60
EC centrifugal, backward
AC centrifugal, forward
362
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Diagonal Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
238
AC centrifugal fan
single inlet, 400
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 20 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R4D 400 (2)
subject to alterations
VAC
Hz
rpm 1210
kW
F/VDB
Pa
p. 596 f. D1)/D2)
3~ 230/400 50
4.92 14.70/8.50
Curves
[in H O] [Pa] A A A 1 2
2
Electr. connection
I [A] 14.70/8.50 11.19/6.46
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 87 86
1000
3,2
4,0
800
600
2,4
400
200
0,8
1,6
1000
2000
3000
4000
5000
[CFM] [m3/h]
2000
4000
6000
8000
154
kg 32.5
Inlet nozzle
Flange
40010-2-4013
38400-2-4017
8x45 M10
6x60
9
400
414
325 456
1000
Z 4 2551
Housing width
421
Brass lead tips
140
30
1
9
316
437
6x60
30
380
355
30
65
220
30
20
233
331
30
308
30 30
250
288
30
155
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
Accessories
1620,3
4301 456
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
408
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
268
AC centrifugal fans
single inlet, 400
Material: Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: A IP 20, B IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Any Condensate discharge holes: A none, B on rotor and stator sides Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R6D 400 (2) R8D 400 (2)
subject to alterations
VAC
Hz
kW
F/VDB
Pa 0 100
3~ 230/400 50 3~ 230/400 50
Curves
[Pa] [in H O]
2
n [rpm]
A A B 2 B 2 1 2 1
Electr. connection
I [A] 7.10/4.10 5.51/3.18 3.46/2.00 2.74/1.58
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 80 74 71 67
500
400
300
1,2
1,6
2 1 0,8
200
100
0,4
500
1000
1500
2000
2500
3000
3500
[CFM] [m3/h]
1000
2000
3000
4000
5000
6000
156
kg 29.0 26.0
Inlet nozzle
Flange
40010-2-4013 40010-2-4013
38400-2-4017 38400-2-4017
8x45 M10
6x60
9
400
414
325 456
1000
Z 4 2551
Housing width
421
Brass lead tips
140
30
1
9
316
437
6x60
30
380
355
30
65
220
30
20
233
331
30
308
30 30
250
288
30
157
Inlet nozzle p. 552 Electr. connections p. 596 f.
Contacts
Technology
Accessories
1620,3
4301 456
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
408
25
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Lateral Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE (acc. to EN 60034)
General information
30
30
268
AC centrifugal blowers
dual inlet, 140
Material: Housing: PP plastic, black Impeller: PP plastic, white Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, standard external-rotor motor anti-vibration mounted on one side Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D2E 140
subject to alterations
Hz 50 60
W 130 130
A 0.58 0.58
dB(A) 58 56
Pa 0 0
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8
2
LpA [dB(A)] 56 59 52 56 46 49 36 38
400
1,5
A A A A
300
2 1,0
200
0,5
100
8
100
200
300
400
500
158
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Ste p4
p3 Ste
Ste p2
St ep 1
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE
kg 2.3
109,8 10
158 110
157,5
123
216,4
217,7
X 30 215,8 30 142
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
159
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
91,4
EC centrifugal, forward
124,5
138
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: PA plastic, red-brown Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, standard external-rotor motor anti-vibration mounted via support plate Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D2E 146
subject to alterations
Hz 50 60
W 120 125
A 0.53 0.55
dB(A) 51 53
Pa 50 100
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 55 58 48 53 40 47 31 38
300
1,2
250
A A
200
0,8
150
1
100
0,4
50
100
200
300
[CFM] [m3/h] 60 Hz
100
200
300
400
500
50 Hz
160
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Ste p4
p3 Ste
p Ste 2
Ste p1
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE
kg 2.5
149,5
45
222
138
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
161
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
99,5
EC centrifugal, forward
1,8
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: PA plastic, red-brown Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, standard external-rotor motor anti-vibration mounted via support plate Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D2E 146
subject to alterations
Hz 50 60
W 160 170
A 0.70 0.75
dB(A) 53 58
Pa 0 200
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 59 62 50 55 43 49 31 38
400
Ste p4
A A A
350
300
1,2
St ep
2 A
250
St ep 2
200
0,8
Ste
p1
150
6 1
100
0,4
50
100
200
300
400
500
600
50 Hz
[m3/h] 60 Hz
162
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE
kg 2.7
149,5
45
222
138
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
163
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
99,5
EC centrifugal, forward
1,8
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: PP plastic, white Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Counter-clockwise, seen on plug Type of protection: IP 20 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, EW motor Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 146
subject to alterations
Hz 50 60
W 150 160
A 0.66 0.71
dB(A) 51 55
Pa 0 150
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 51 55 47 49 37 43 31 35
400
1,5
A A A A
300
1,0 2
200
4
0,5
100
8
St
ep
1
7
100
200
300
[CFM] [m3/h]
100
200
300
400
500
50 Hz
60 Hz
164
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
St ep 4
Ste p3
Ste p2
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE, CCC, GOST
kg 3.0
112
149,5
128 216
163 138
12 30
X 220 195
53
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
165
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
EC centrifugal, forward
76
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: PP plastic, white Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Counter-clockwise, seen on plug Type of protection: IP 20 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, EW motor Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 146
subject to alterations
Hz 50 60
W 195 215
A 0.86 0.94
dB(A) 57 54
Pa 0 150
Curves
[Pa] [in H O] A
2
n [rpm]
A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 56 59 45 52 38 45 30 38
Step 4
A A
400
1,5
Ste
p3
A A 2 A
300
1,0
200
Step 1
1 6
100
8 5 7 0 100 200 300 400 [CFM] [m3/h] 50 Hz 60 Hz 3
0,5
200
400
600
166
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Step 2
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE, GOST
kg 3.5
112
149,5
128 216
163 138
12 30
X 220 195
53
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
167
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
EC centrifugal, forward
76
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Counter-clockwise, seen on plug Type of protection: IP 20 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, EW motor Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 146
subject to alterations
Hz 50 60
W 355 400
A 1.55 1.75
dB(A) 66 63
Pa 0 200
Curves
[Pa] [in H O] A
2
n [rpm]
A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 66 61 61 62 54 57 45 49
500
Step 3
Step 4
A A A 2 A A 4 A
Ste
p2
400
1,5
St ep 1
300
1,0
200
1 0,5 8 3
100
5 7
150
300
450
[CFM] [m3/h] 50 Hz 60 Hz
200
400
600
800
168
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: VDE
kg 3.6
112
149,5
128 216
163 138
7 30
X 220 199
35
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
1 2 3 4 5 6
= = = = = =
PE 4 5 6
Speed increase
L1
169
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
EC centrifugal, forward
76
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 160
Material: Housing: PP plastic, black Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, standard external-rotor motor anti-vibration mounted on one side Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D2E 160
subject to alterations
VAC 1~ 230
Hz 50
m3/h 400
rpm 1170
W 110
A 0.49
dB(A) 53
Pa 100
C -25 to +55
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 51 55 43 48 38 44 30 36
400
1,5
A A A
Ste
p4
A A
300
1,0 2
St
ep 3
200
Ste p2
4 0,5
Step
1 6 3 8 7 5
100
50
100
150
200
250
[CFM] [m3/h] 60 Hz
100
200
300
400
50 Hz
170
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: CCC, GOST
kg 2.5
277 30 138
163 110
149,5
138
5x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
114,5
1 2 3 4 5 6
= = = = = =
PE
Speed increase
L1
171
Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
282
190
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 160
Material: Housing: PP plastic, black Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 4-step blower with integrated terminal box, standard external-rotor motor anti-vibration mounted on one side Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D2E 160
subject to alterations
VAC 1~ 230
Hz 50
m3/h 550
rpm 1400
W 180
A 0.80
dB(A) 59
Pa 150
C -25 to +40
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 59 60 48 52 40 44 28 34
500
2,0
A A
400
1,5
Ste
p4
A A 2
300
St ep
1,0
200
St
ep
4 1
0,5
100
Ste
p1
8 7
6 3 5
100
200
300
[CFM] [m3/h]
100
200
300
400
500
50 Hz
60 Hz
172
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
3
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-2-31, CE Approvals: CCC, GOST
kg 3.0
277 30 138
163 110
149,5
138
5x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
114,5
1 2 3 4 5 6
= = = = = =
PE
Speed increase
L1
173
Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 926 682-3 6 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
282
190
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller: PA plastic, black Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Counter-clockwise, seen on cable exit Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 5-step blower with integrated terminal box, EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type D4E 146
subject to alterations
Hz 50 60
W 65 68
A 0.29 0.30
dB(A) 46 42
Pa 0 0
Curves
[Pa] [in H O] A
2
n [rpm]
A A 1 2 3 4 5 6 7 8 9 10
P1 [W] 58 43 52 39 48 40 20 20 13 13
I [A] 0.25 0.19 0.23 0.18 0.22 0.19 0.16 0.16 0.13 0.13
LpA [dB(A)] 45 46 33 43 26 39 21 29 17 20
1080 1345 695 1210 560 1080 450 735 315 475
120
Step 5
A A 2 A A A
Step
100
0,4
Ste
St ep 2
p3
80
0,3
A A
60
0,2
40
20
10 7 9 0 100 5
0,1
8 3
200
300
[CFM] [m3/h] 60 Hz
100
200
300
400
500
50 Hz
174
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
ep St 1
kg 2.5
203 98,5
128
210 216
80
209 239
5 PE N
1 2 3 4 5 8 9
= = = = = = =
9 6
Speed increase
4 5 1 2 3
L1
175
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 927 231-3 7 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
EC-SYSTEMS
4x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
EC centrifugal, forward
100
98 116
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-1, CE
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: PP plastic, black Impeller / motor suspension: PA plastic, black Rotor: Partially cast in aluminium Terminal box: PP plastic, black Direction of rotation: Counter-clockwise, seen on cable exit Type of protection: IP 44 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: 5-step dual blower with integrated terminal box, standard external-rotor motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Sound pressure level Min. back pressure
Nominal data
Type K4E 146
subject to alterations
VAC 1~ 230
Hz 50
m3/h 1180
rpm 750
W 85
A 0.38
dB(A) 47
Pa 0
C -25 to +50
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10
P1 [W] 76 65 59 51 47 43 13 13 10 10
I [A] 0.33 0.28 0.27 0.24 0.22 0.21 0.15 0.15 0.13 0.13
LpA [dB(A)] 45 46 39 41 29 35 25 28 25 26
1050 1240 810 1060 570 820 400 580 330 480
120
100
0,4
Ste
p5
2
A A A
80
0,3
A A 4
60
Ste
0,2
40
e St p1
0,1
6 3
20
8 10 9 0 7 200 400 600 [CFM] [m3/h] 60 Hz 5
200
400
600
800
1000
50 Hz
176
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
e St p 4
p3
ep St 2
Motor protection: TOP wired internally Connection leads: Via plug Protection class: I Capacitor: FPU (P2) integrated in terminal box completely wired up and ready for plug-in Product conforming to standards: EN 60335-1, CE Approvals: CCC
kg 4.0
677 203 98,5 272 247 226 158 272 247 226
80
5 PE N
1 2 3 4 5 8 9
= = = = = = =
1 4
Speed increase
6 5 9 8 7
L1
177
Guard grille p. 556 Connection lead p. 558 Capacitor p. 560 f.
Contacts
Technology
View X AMP Universal Mate-N-Lok coded plug system Connector shell: AMP 927 231-3 7 x plug pin: AMP 926 886-1
Electrical connection: When changing speeds, switch must break the circuit
Accessories
8x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material)
239 643
209 239
EC-SYSTEMS
EC centrifugal, forward
100
98 116
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 097
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor Type of protection: IP 20 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 097 D2E 097 D2E 097
subject to alterations
Hz 50 60 50 60 50 60
W 28 32 50 55 87 100
F/VDB 1.0 /400 1.0 /400 1.5 /400 1.5 /400 2.0 /400 2.0 /400
dB(A) 46 44 50 48 58 57
Pa 0 0 0 0 0 0
C -25 to +85 -25 to +80 -25 to +70 -25 to +55 -25 to +40 -25 to +35
Curves
[Pa] [in H O]
2
n [rpm]
A A B B C 1 2 1 2 1 2
P1 [W] 27 25 48 44 83 73
300
250
1,0
150
0,5
0,75
200
100
0,25
2 B
50
A 1 1
50
100
150
200
[CFM]
100
200
300
50 Hz
400
[m3/h] 60 Hz
178
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
A B C 78.0 D 66.0 88.0 88.0 E 46.0 67.0 67.0 H I K L M N 62.0 O 96.0 P 51.0 62.5 62.5
Centrifugal blower without flange D2E 097-CH85 -02 D2E 097-BK66 -02 D2E 097-BI56 -02
Centrifugal blower with flange D2E 097-CH85 -48 D2E 097-BK66 -48 D2E 097-BI56 -48
140.0 128.0
A B
L 1
C D
5,5
179
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
200
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: C CCC, GOST
General information
AC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: A Counter-clockwise, B clockwise seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 133 D2E 133
subject to alterations
Hz 50 60 50 60
dB(A) 58 58 59 56
Pa 50 200 0 100
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
500
400
1,5
300
1,0
2 A
200
100
0,5
100
200
300
[CFM]
200
400
600
50 Hz
[m3/h] 60 Hz
180
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
A B C D E I J K L M N 93.5 79.0 P 67.5 66.0
Centrifugal blower without flange D2E 133-CI33 -56 D2E 133-AM47 -01
Centrifugal blower with flange D2E 133-CI33 -22 D2E 133-AM47 -23
kg 3.3 3.5
206.0 190.0 142.0 126.0 102.0 168.0 400.0 204.0 254.0 238.0 108.0 92.0 69.0 215.0 300.0 171.5
A B
L 1
C D
5,5
145
181
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
112
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, B also GOST
General information
AC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 133
subject to alterations
Hz 50 60
W 190 195
A 0.84 0.85
dB(A) 56 55
Pa 0 100
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
1700 2480
500
400
1,5
300
1,0
200
100
0,5
100
200
300
400
[CFM]
200
400
600
50 Hz
800
[m3/h] 60 Hz
182
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 4.4
270 254
97 1
142 126
102
5,5
145
67,5
183
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
300
232
98
EC-SYSTEMS
112
213
EC centrifugal, forward
204
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: PA plastic Rotor: Partially cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 133
subject to alterations
Hz 50 60
W 70 80
A 0.32 0.35
dB(A) 52 54
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 66 63
1240 1380
140
120
80
2
60
0,2
0,4
100
40
1
20
100
200
300
[CFM] [m3/h] 60 Hz
100
200
300
400
500
50 Hz
184
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 2.6
254 238
88 1
108 92
69
5,5
145
185
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
300
215
76
EC-SYSTEMS
66
112
180
EC centrifugal, forward
171,5
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: PA plastic Rotor: Partially cast in aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 133 D4E 133
subject to alterations
Hz 50 60 50 60
W 73 83 75 95
dB(A) 52 52 55 56
Pa 0 0 0 0
Curves
[in H O] [Pa]
2
n [rpm]
A A B 1 2 1 2
P1 [W] 69 65 67 58
160
0,6 B
120
0,4
80
0,2
40
1 1
100
200
300
400
[CFM] [m3/h] 50 Hz 60 Hz
200
400
600
186
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Centrifugal blower without flange D4E 133-DH01 -J2 D4E 133-DL01 -H9
Centrifugal blower with flange D4E 133-DH01 -J4 D4E 133-DL01 -J5
kg 3.3 3.8
270 254
97 1
142 126
102
5,5
145
67,5
187
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
300
232
98
EC-SYSTEMS
112
213
EC centrifugal, forward
204
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 146 D2E 146
subject to alterations
Hz 50 60 50 60
dB(A) 60 62 63 68
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
2,5
600
500
2,0
400
1,5
300
1,0
200
0,5
100
100
200
300
400
500
600
[CFM] [m3/h]
200
400
600
800
1000
50 Hz
60 Hz
188
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Centrifugal blower without flange D2E 146-AP43 -02 D2E 146-AP47 -02
Centrifugal blower with flange D2E 146-AP43 -22 D2E 146-AP47 -22
kg 4.2 4.2
270 254
97 1
142 126
102
5,5
145
189
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
350
232
98
EC-SYSTEMS
69
117
219
EC centrifugal, forward
206
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
AC centrifugal blowers
dual inlet, 146
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 146
subject to alterations
Hz 50 60
W 100 116
A 0.44 0.51
dB(A) 55 53
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O] A A 1 2
P1 [W] 88 65
160
0,6
120
2 0,4
80
40
0,2
100
200
300
400
[CFM]
200
400
600
50 Hz
800
[m3/h] 60 Hz
190
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 3.5
270 254
97 1
142 126
102
5,5
145
191
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
350
232
98
EC-SYSTEMS
69
117
219
EC centrifugal, forward
206
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 160
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor mounted via brackets on one side Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 160
subject to alterations
Hz 50 60
W 117 140
A 0.51 0.62
dB(A) 58 58
Pa 0 0
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
P1 [W] 114 93
1230 1360
240
200
160
0,6
0,8
120
A 0,4
80
40
0,2
100
200
300
400
[CFM] [m3/h] 50 Hz 60 Hz
200
400
600
192
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 4.3
214 198
103 1
145 129
105
5,5
175
400
Brass lead tips
193
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
176
100,5
EC-SYSTEMS
87
130
242
EC centrifugal, forward
226
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 160
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 20 Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D2E 160
subject to alterations
VAC 1~ 230
Hz 50
m3/h 1195
rpm 1850
W 410
A 1.80
dB(A) 64
Pa 200
C -25 to +40
p. 596 f. A1)
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
2265 2520
600
2
500
2,0
2,5
400
1,5 1
300
1,0
200
0,5
100
150
300
450
600
[CFM]
200
400
600
800
1000
1200
50 Hz
[m3/h] 60 Hz
194
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 5.7
102
107
17
100,5
1300
Brass lead tips
276
195
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
87
130
241
EC centrifugal, forward
225
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, GOST
General information
AC centrifugal blowers
dual inlet, 160
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 160 D4E 160
subject to alterations
Hz 50 60 50 60
dB(A) 63 64 64 67
Pa 0 10 0 0
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
250
1,0
200
0,75
150
0,5
100
A 11 B
50
0,25
200
400
600
800
[CFM] [m3/h]
400
800
1200
50 Hz
60 Hz
196
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: B CCC, GOST Options: With flange
Dimensions
I 232.0 276.0
Centrifugal blower without flange D4E 160-EG06 -05 D4E 160-FH12 -05
kg 4.5 5.9
102
107
17
100,5
400
Brass lead tips
197
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
87
130
241
EC centrifugal, forward
225
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 180
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 54 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4D 180 (1)(2)
subject to alterations
VAC
Hz
F/VDB
dB(A) 62 62
Pa 0 0
p. 596 f. C1)/C2)
3~ 230/400 50 3~ 230/400 60
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
1100 1275
350
1,25
300
250
0,75
200
1,00
150
0,50
100
0,25
50
200
400
600
800
1000
1200
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
198
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 9.5
296 133
278 258
6x
60
333
19
2
136
149
3,2
600
Brass lead tips
255
199
Guard grille p. 555 Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
180
224
289
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Without thermal protection Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 180
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 54 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 180 D4E 180 (1)
subject to alterations
Hz 50 60 50 60
dB(A) 65 66 64 64
Pa 0 0 0 0
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
350
1,25
300
B
250
0,75
200
1,00
150
0,50
100
0,25
50
1 1
200
400
600
800
1000
1200
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
50 Hz
200
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Dimensions
C D E S 90.0
kg 11.0 10.8
296 133
6x
60
333
19
2
136
149
3,2
600
Brass lead tips
255
201
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
C D
289
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC, A also GOST
General information
AC centrifugal blowers
dual inlet, 200
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 54 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4D 200 (1)(2) D4E 200 (1)
subject to alterations
VAC
Hz
F/VDB
dB(A) 63 60 60
Pa 0 50 150
Curves
[Pa] [in H O] A A B 1,5 B 1 2 1 2
2
400
350
300
B
250
1,0
200
150
0,5 A 1
100
50
250
500
750
1000
1250
[CFM]
400
800
1200
1600
2000
2400
50 Hz
[m3/h] 60 Hz
202
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Centrifugal blower with flange (large) D4D 200-CA01 -02 D4E 200-CA02 -02
kg 12.0 11.9
327 146
6x
60
371
21
3
151
167
3,2
600
Brass lead tips
287
203
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
EC-SYSTEMS
304 284
180
250
321
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: A without TOP, B TOP wired internally Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 225
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: IP 22 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4D 225(1)(2)
subject to alterations
VAC
Hz
F/VDB
dB(A) 64 62
Pa 0 100
p. 596 f. C1)/C2)
3~ 230/400 50 3~ 230/400 60
Curves
[Pa] [in H O]
2
n [rpm]
A A 1 2
1110 1300
500
400
1,5 A
300
1,0
200
100
0,5
500
1000
1500
[CFM]
500
1000
1500
2000
2500
3000
50 Hz
[m3/h] 60 Hz
204
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
kg 12.5
327 158
304 284
180
6x
60
24
194
3,2
370
600
Brass lead tips
287
205
Guard grille p. 555 Electr. connections p. 596 f.
Contacts
Technology
Accessories
151
EC-SYSTEMS
250
321
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Without thermal protection Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: CCC
General information
AC centrifugal blowers
dual inlet, 225
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Partially cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (opposite cable exit) Type of protection: A B IP 22, C IP 54 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 225 D4E 225 (1) D6E 225 (1)
subject to alterations
Hz 50 50 50 60
dB(A) 67 65 59 59
Pa 20 100 20 80
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2 1 2
350
300
C C
250
1,0
B A
200
150
0,5
100
50
500
1000
1500
[CFM] [m3/h] 60 Hz
500
1000
1500
2000
2500
50 Hz
206
Electr. connection
Nominal voltage
Current draw
Power input
Speed/rpm
Frequency
Capacitor
Air flow
Curve
Motor protection: TOP wired internally Cable exit: Variable Protection class: I Capacitor: A B FPU (P2) acc. to IEC 252 Product conforming to standards: EN 60335-1, CE Approvals: A B CCC, B GOST
Dimensions
A B C D E F I S 90.0
Centrifugal blower with flange (large) D4E 225-CC01 -02 D6E 225-FB07 -02
341.0 321.0 304.0 284.0 250.0 287.0 287.0 180.0 387.0 367.0 304.0 284.0 250.0 333.0 333.0 180.0
327 158
6x
60
24
194
3,2
370
600
Brass lead tips
207
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
151
EC-SYSTEMS
C D
EC centrifugal, forward
A F 180 7
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 225
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4D 225 D4D 225 (2)
subject to alterations
Hz 50 60 50 60
F/VDB
Pa 0 0 0 150
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 69 63 72 65
500
400
1,5
300
1,0
200
1 0,5 1
100
A
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
208
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: A GOST Options: 400 VAC /Y for two speed steps available on request, mounting brackets on request
Dimensions
C D E S 90.0
kg 15.6 15.6
327 158
6x
60
24
194
3,2
370
600
Brass lead tips
333
209
Guard grille p. 555 Electr. connections p. 596 f.
Contacts
Technology
Accessories
151
EC-SYSTEMS
C D
367
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 225
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 225 D4E 225 (2)
subject to alterations
Hz 50 60 50 60
Curves
[Pa] [in H O]
2
n [rpm]
A A B B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 69 63 71 65
500
400
1,5
300
1,0
2 B
200
A 1 0,5 1
100
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
210
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: A GOST Options: Mounting brackets on request
Dimensions
C D E S 90.0
kg 16.7 16.7
327 158
6x
60
24
194
3,2
370
600
Brass lead tips
333
211
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
151
EC-SYSTEMS
C D
367
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 240
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 240
subject to alterations
Hz 50 60
W 1020 1320
A 4.45 5.75
Pa 0 50
p. 596 f. A2a)
Curves
[Pa] [in H O] A
2
n [rpm]
A A 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 73 70
1345 1390
500
400
1,5
300
1,0
2,0
200
1 0,5
100
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
212
kg 15.3
327 158
200 180
146
370
24
209
600
Brass lead tips
287
213
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
151
EC-SYSTEMS
90
5
20 3x1
321
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Options: Mounting brackets on request
General information
AC centrifugal blowers
dual inlet, 250
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4D 250 D4D 250 (2)
subject to alterations
Hz 50 60 50 60
F/VDB
Pa 0 250 50 350
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 71 65 72 69
500
2,0
400
1,5 2 2 B
300
A 1,0
200
100
0,5 0
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
214
Dimensions
C D E S U
kg 16.7 16.7
90.0 198.0
387 194
329
27 5
200
3,2
392
600
Brass lead tips
298
215
Guard grille p. 555 Electr. connections p. 596 f.
Contacts
Technology
Accessories
173
EC-SYSTEMS
6x6
C U D
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Options: 400 VAC /Y for two speed steps available on request, mounting brackets on request
General information
AC centrifugal blowers
dual inlet, 250
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D4E 250 D4E 250 (2)
subject to alterations
Hz 50 60 50 60
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 71 65 72 69
500
2,0
400
1,5 B 2 2
300
A 1,0
200
100
0,5 0
500
1000
1500
2000
2500
[CFM] [m3/h] 60 Hz
1000
2000
3000
4000
50 Hz
216
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: B GOST Options: Mounting brackets on request
Dimensions
C D E S U
kg 16.3 16.3
90.0 198.0
387 194
329
27 5
200
3,2
392
600
Brass lead tips
298
217
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
173
EC-SYSTEMS
6x6
C U D
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
AC centrifugal blowers
dual inlet, 250
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Cast in aluminium Direction of rotation: Counter-clockwise, seen on rotor (on cable exit) Type of protection: IP 20 (acc. to EN 60527) Insulation class: "F" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: EW motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D6E 250 D6E 250 (2)
subject to alterations
Hz 50 60 50 60
Pa 0 0 0 0
Curves
[Pa] [in H O]
2
n [rpm]
A A B 1 2 1 2
Electr. connection
Nominal voltage
Speed/rpm (1)
Frequency
Capacitor
Curve
LpA [dB(A)] 59 53 65 57
250
1,0
200
0,75
150
0,5 A
100
50
0,25 0
400
800
1200
1600
[CFM] [m3/h] 60 Hz
400
800
1200
1600
2000
2400
2800
50 Hz
218
Dimensions
C D E S U
kg 14.4 14.4
90.0 198.0
387 194
329
27 5
200
3,2
392
600
Brass lead tips
298
219
Guard grille p. 555 Capacitor p. 560 f. Electr. connections p. 596 f.
Contacts
Technology
Accessories
173
EC-SYSTEMS
6x6
C U D
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Motor protection: Design with thermal overload protector Cable exit: Axial Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Options: Mounting brackets on request
General information
220
221
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal fans
backward curved, 120
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 20 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 120 R1G 120
subject to alterations
VDC 24 48
W 26 26
A 1.20 0.60
dB(A) 62 62
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 4520 4500 4540 4750 4060 4000 4050 4200 3270 3250 3280 3400
P1 [W] 36 36 36 32 26 26 26 23 14 14 14 13
LpA [dB(A)] 65 64 61 64 62 61 58 61 56 55 53 56
tL [%] 27 45 39 27 45 39 27 45 39
400
1,5
300
UR
A A
200
8
3 A
100
2' 2 6
0,5
UN
5 0 25 50 75 100 125
1' [CFM]
40
80
120
160
200
240
222
Technical features: Control input 0-10 VDC / PWM Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (48 VDC) CCC
kg 0.5 0.5
96120-2-4013 96120-2-4013
54 1 45,3 0,5
18
59 98 120
96 -1
146
47
0,
M4
6 60 300 20 26 40,5 2
4x90
223
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
17
EC centrifugal, forward
15
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal fans
backward curved, 133
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 20 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 133 R1G 133
subject to alterations
VDC 24 48
W 28 28
A 1.30 0.70
dB(A) 63 63
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O]
2
n [rpm]
A A A A A 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
P1 [W] 39 44 44 41 28 31 31 29 20 23 23 21 13 15 15 14
LpA [dB(A)] 74 60 59 61 63 58 56 58 59 55 53 55 55 51 49 51
tL [%] 45 56 44 45 56 44 45 56 44 45 56 44
4450 4250 4270 4380 3900 3770 3770 3850 3500 3380 3400 3450 2970 2860 2880 2930
500
400
1,5 4'
UR
A A A
UN
300
4 1,0 3'
A A
200
12
3 7
A A 2' 2 6 A A A
0,5
11
100
10
9 0 50 100 150
5 200
100
200
300
224
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 0.7 0.7
09566-2-4013 09566-2-4013
72 92,8
133
129
87
29
225
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
13
58 0,15
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal fans
backward curved, 175
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 22 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 175 R1G 175
subject to alterations
VDC 24 48
W 34 34
A 1.60 1.00
dB(A) 65 65
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
P1 [W] 46 51 51 51 34 39 39 37 20 22 23 21 12 13 13 12
LpA [dB(A)] 67 60 58 66 65 58 56 64 60 54 51 60 56 50 56 53
tL [%] 49 58 39 49 58 39 51 58 39 51 58 40
3390 3200 3170 3300 3100 2910 2880 3010 2520 2430 2390 2470 2050 1950 1920 1990
400
1,5
A A A 4'
UR
A A
300
4 1,0
UN
3' 3 8
A A A
200
A A
7 0,5
12
A 2' 2 A A 6
10
100
11
9 0 100 200
5 300
1' [CFM]
100
200
300
400
500
600
[m3/h]
226
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with VDE, CCC
kg 0.7 0.7
09576-2-4013 09576-2-4013
69 1 55,3 1 14 58 0,15
125,5
131
175
170
85 450 20 42 62 2
M4
227
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
29
EC-SYSTEMS
72
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 175
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black, with cooling holes Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 22 Insulation class: "B" Mounting position: Any Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 175
subject to alterations
VDC 48
VDC 36-52
m3/h 695
rpm 4000
W 75
A 1.75
dB(A) 72
C -25 to +40
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8
P1 [W] 88 93 96 93 75 80 83 80 42 45 47 46
LpA [dB(A)] 73 71 67 72 72 69 66 71 67 64 62 66
tL [%] 39 55 43 39 55 43 39 55 43
4250 4130 4050 4130 4000 3920 3880 3920 3290 3250 3160 3250
2,5
600
A A
U52V
2,0
A A A A
500
4' 4
400
1,5
UN
3'
A A A
300
1,0
200
7 2' 2 0,5
100
100
200
300
400
500
600
700
228
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: CCC
kg 1.0
09576-2-4013
69 1 67 1 14 58 0,15
125,5
131
175
170
85 450 20 42 62 2
M4
229
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
29
EC-SYSTEMS
72
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
10
EC centrifugal fans
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: A (24 VDC) IP 20, A (48 VDC) IP 22 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 190 R1G 190
subject to alterations
VDC 24 48
W 51 51
A 2.30 1.20
dB(A) 68 68
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 3300 3200 3160 3290 2950 2870 2830 2940 2390 2340 2320 2390
P1 [W] 71 75 77 72 51 54 56 51 28 30 31 28
LpA [dB(A)] 70 66 63 67 68 63 60 63 62 58 54 58
tL [%] 45 53 42 45 53 42 45 53 42
600
500
2,0
A A A
400
1,5
4'
UR
4
A A
300
UN
1,0 3 3'
A A
200
7 0,5 2 6 2'
100
100
200
5 300
1' 400
[CFM] [m3/h]
100
200
300
400
500
600
700
230
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 1.0 1.0
09576-2-4013 09576-2-4013
max. 190
min. 131
125,5
170
72
231
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
29
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
10
EC centrifugal fans
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 190 R1G 190
subject to alterations
VDC 24 48
W 80 71
A 3.70 1.65
dB(A) 68 68
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm]
A A A A 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
LpA [dB(A)] 71 66 65 69 68 64 63 66 65 59 58 61 60 51 49 52
tL [%] 41 45 33 42 45 34 41 44 33 39 43 33
3580 3590 3630 3770 3250 3275 3300 3400 2700 2710 2740 2795 1910 1910 1940 1985
700
2,5
600
4' 2,0
UR
A A
500
A 4 3' A A
400
1,5
UN
A A 2' A
300
1,0
2 A
200
12
6
11 10
A A
100
0,5
50
100
150
9 200
5 250 300
100
200
300
400
500
232
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 1.3 1.3
09576-2-4013 09576-2-4013
68,5 1 65 1 14 58 0,15
max. 190
min. 131
125,5
170
92
233
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
32,7
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
10
EC centrifugal fans
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 220 R1G 220
subject to alterations
VDC 24 48
W 106 100
A 5.00 2.40
dB(A) 76 73
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8
LpA [dB(A)] 78 69 67 71 76 68 65 69 70 63 59 63
tL [%] 53 55 46 53 55 46 53 55 46
3400 3200 3050 3000 3150 3010 2870 2800 2470 2360 2300 2250
800
3,0
A A A
700
600
A A 2,0
500
A 4'
UR
A A A
400
UN
4 3'
300
1,0 8
3 2'
200
7 6
100
200
400
600
200
400
600
800
1000
234
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 1.4 1.4
09609-2-4013 09609-2-4013
711 65 1 21 58 0,15
max. 220,9
min. 160,7
155
252
92
235
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
32,7
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
22
EC centrifugal fans
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 225 R1G 225
subject to alterations
VDC 24 48
W 100 95
A 4.60 2.20
dB(A) 67 67
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 2780 2610 2570 2780 2700 2450 2400 2610 2230 2150 2100 2230
LpA [dB(A)] 69 64 62 66 67 63 60 64 63 58 56 58
tL [%] 48 57 42 48 57 42 48 57 42
700
600
A A A 2,0
500
UR
4'
A A A
400
4
300
1,0
A 8
UN
3 7
3'
200
2' 2
100
200
400
600
800
1000
236
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 1.5 1.5
96358-2-4013 96358-2-4013
146
223
M4
237
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
32,7
6 85
EC-SYSTEMS
EC centrifugal, forward
991 651
28
580,15
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
25
EC centrifugal fans
backward curved, 250
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 250 R1G 250
subject to alterations
VDC 24 48
W 93 105
A 4.30 2.55
dB(A) 73 72
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 2870 2610 2530 2650 2600 2440 2360 2490 2190 2020 2020 2070
LpA [dB(A)] 75 68 63 66 72 66 62 64 68 62 57 59
tL [%] 55 58 48 55 58 48 55 58 48
700
600
A A A 2,0
500
A 4'
UR
A
400
A A
300
8 1,0
3'
UN
200
7 2
2'
100
200
400
5 600
200
400
600
800
1000
1200
238
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 2.0 2.0
96359-2-4013 96359-2-4013
89 1
75 1
Brass lead tips
58 0,15
max. 250,2
92 min. 172
164,5
255
6 85 450+20
M4
max. 74,3
239
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
min. 44,5
EC-SYSTEMS
31
EC centrifugal, forward
31
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VDC 48
VDC 36-57
m3/h 1580
rpm 2645
W 135
A 2.80
dB(A) 72
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
LpA [dB(A)] 75 70 68 71 72 67 64 66 66 59 56 58 48 44 43 35
tL [%] 45 60 55 45 60 55 45 60 55 45 60 55
3055 2990 2970 2980 2645 2600 2580 2590 1900 1875 1870 1870 835 830 830 830
800
3,0
UR
A A
700
2,5
A 4' A A A 4 3' A A 3 A A
600
UN
500
300
1,0 8 7 2' 2
1,5
400
2,0
A A A
200
0,5
100
12 11 10
9 400 600
5 800
1 1000
200
400
800
1200
1600
240
kg 3.0
96359-2-4013
31
90
0
M5
EC-SYSTEMS 241
Inlet nozzle p. 550 Electr. connection p. 600
102 172
0 60 85
+2
252
255
164,5
Core-end sleeves
Contacts
Technology
Accessories
34
EC centrifugal, forward
106,5 1,8 77 1
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
28
EC centrifugal fans
backward curved, 280
Material: Impeller: Sheet steel Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 280 R1G 280
subject to alterations
VDC 24 48
W 95 95
A 4.60 2.30
dB(A) 71 71
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
LpA [dB(A)] 72 64 62 67 71 63 59 64 67 60 55 59
tL [%] 55 55 31 55 55 31 55 55 31
1840 1650 1670 1950 1710 1550 1560 1810 1470 1360 1370 1530
500
400
1,5 4'
A A A
UR
300
1,0
A A A 3' A 3
UN
200
7 0,5
2' 2 6
100
1 1000
400
800
1200
1600
242
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 2.8 2.8
96360-2-4013 96360-2-4013
125 1
75 1 max. 281,5
Brass lead tips
58 0,15
92 min. 190,2
182,5
280
M4
243
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
31
EC centrifugal, forward
35
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
31
EC centrifugal fan
backward curved, 280
Material: Impeller: Sheet steel Rotor: Coated in black Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VDC 48
VDC 36-57
m3/h 2020
rpm 1965
W 123
A 2.60
dB(A) 70
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A 2,0 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 1
n [rpm] 2265 2185 2165 2230 1965 1905 1885 1940 1390 1365 1360 1380 800 790 785 795
LpA [dB(A)] 72 68 65 69 70 65 61 66 63 58 53 55 53 48 42 41
tL [%] 53 60 50 53 60 50 53 60 50 53 60 50
500
UR
4' A A
400
1,5
UN
4 3'
A A
300
1,0 3
A A A 2' A 8 2 0,5 7 A A A 6
12 11 10
200
100
5 1000
1 1200
400
800
1200
1600
2000
244
kg 3.3
96360-2-4013
35
M5
EC-SYSTEMS 245
Inlet nozzle p. 550 Electr. connection p. 600
191
0 60 85
102
281
280
+2
182,5
Core-end sleeves
Contacts
Technology
Accessories
34
EC centrifugal, forward
1211,8 771
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA
AC centrifugal, backward
General information
90
31
EC centrifugal fans
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 310 R1G 310
subject to alterations
VDC 24 48
W 90 90
A 4.20 2.20
dB(A) 64 64
p. 600 G) G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 1720 1540 1490 1560 1600 1430 1390 1450 1150 1260 1230 1270
LpA [dB(A)] 66 60 59 63 64 58 58 61 60 55 54 58
tL [%] 62 67 50 62 67 50 62 67 50
500
400
1,5
A A A
300
4' 1,0 4
UR
A A A
200
3' 8
UN
3 7 2' 2 6
100
0,5
200
400
600
800
5 1000
1' 1200
[CFM] [m3/h]
400
800
1200
1600
2000
246
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, A (48 VDC) with CCC
kg 2.6 2.6
31050-2-4013 31050-2-4013
31051-2-4013 31051-2-4013
120 1
75 1
35
Brass lead tips
18
max. 318,5
58
,1
M4
EC-SYSTEMS 247 Contacts Technology Accessories
min. 220
211 208,1
300
92
31
EC centrifugal, forward
48
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
55,5
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R1G 310
subject to alterations
VDC 48
VDC 36-52
m3/h 2100
rpm 1800
W 120
A 3.00
dB(A) 67
C -25 to +40
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 1895 1720 1610 1635 1800 1610 1530 1570 1570 1430 1350 1400
LpA [dB(A)] 67 64 60 65 67 62 58 63 63 58 54 60
tL [%] 59 67 48 59 67 48 59 67 48
500
A A A
400
1,5
A A 4' A A A 1,0 8
300
UN
3 7
A 3'
U52 V
200
0,5
100
6
2'
5 0 400 800
1 1200
400
800
1200
1600
2000
248
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
kg 2.6
31050-2-4013
31051-2-4013
120 1
75 1
35
Brass lead tips
18
max. 318,5
58
,1
M4
EC-SYSTEMS 249 Contacts Technology Accessories
min. 220
211 208,1
300
92
31
EC centrifugal, forward
48
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
55,5
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VDC 48
VDC 36-57
m3/h 2230
rpm 2000
W 190
A 4.00
dB(A) 71
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 2395 2345 2320 2330 2070 2035 2015 2025 1445 1430 1420 1420 930 925 920 920
LpA [dB(A)] 74 71 70 74 71 67 65 70 61 59 57 62 50 48 47 51
tL [%] 47 60 54 47 60 54 47 60 54 47 60 54
800
700
600
UN
UR
A A
500
2,0
4 1,5
A 3' A A
400
300
1,0 8
A A 2' A A
200
7 2 0,5
100
12 11 10
9 0 400 800
5 1200
1' [CFM]
600
1200
1800
2400
[m3/h]
250
kg 4.2
31050-2-4013
31051-2-4013
119,5 1,8
107 1
35
18
55,5
M5
EC-SYSTEMS 251
Inlet nozzle p. 550 Guard grille p. 553 Electr. connection p. 600
211 208,1
220
85 8
34
60
318
300
102
0 +2
Core-end sleeves
Contacts
Technology
Accessories
EC centrifugal, forward
48
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VDC 48
VDC 36-57
m3/h 2620
rpm 1930
W 208
A 4.35
dB(A) 69
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 2230 2190 2150 2175 1930 1900 1870 1890 1290 1280 1270 1280 660 660 655 655
LpA [dB(A)] 72 69 66 67 69 65 62 61 59 57 55 54 47 46 44 44
tL [%] 50 66 63 50 66 63 50 66 63 50 66 63
700
600
2,4
A 4'
UN
UR
A A A
500
1,8 4 3'
A A A
400
3
300
1,2
A A
200
0,6
2' 8 7 2
A A A
100
6
12 11 10
9 0 400 800
5 1200
1 1600
1000
2000
3000
252
kg 4.4
31050-2-4013
31051-2-4013
150 1,8
107 1
35
18
55,5
M5
EC-SYSTEMS 253
Inlet nozzle p. 550 Guard grille p. 553 Electr. connection p. 600
211 208,1
220
85 8
Core-end sleeves
34
60
318
300
102
+2
Contacts
Technology
Accessories
EC centrifugal, forward
48
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 3-D, 355
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 355
subject to alterations
VDC 48
VDC 36-57
m3/h 2790
rpm 1560
W 178
A 3.70
dB(A) 69
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 1800 1740 1725 1770 1560 1515 1500 1530 1088 1065 1055 1070 470 450 450 455
LpA [dB(A)] 73 67 67 70 69 63 63 65 60 56 54 56 44 42 40 40
tL [%] 53 65 49 53 65 49 53 65 49 53 65 49
600
500
400
1,5
2,0
UR
UN
3'
A A
300
1,0
A 3 A A
200
2' 8 2 0,5 7 A A A 6
12 11
100
10
9 500
5 1000 1500
1000
2000
3000
254
kg 4.6
35560-2-4013
35561-2-4013
158,5 1,8
107 1
44
22
70
,5
M5
240 236,4
102
85 8
Core-end sleeves
255
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
34
60
250
360
350
+2
EC centrifugal, forward
60
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 3-D, 355
Material: Impeller: Sheet aluminium, laser-welded Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 355
subject to alterations
VDC 48
VDC 36-57
m3/h 3030
rpm 1410
W 168
A 3.50
dB(A) 66
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm] 1630 1575 1570 1610 1410 1370 1365 1400 1065 1045 1040 1060 485 480 480 480
LpA [dB(A)] 70 64 63 67 66 60 59 63 58 55 55 56 37 35 34 35
tL [%] 62 66 47 62 66 47 62 66 47 62 66 47
500
2,0
A 4' A A
400
1,5 4 3'
A A
UR
A A
300
1,0 3
UN
A 2' A A A A
200
8 7 0,5 2
100
12
11 10
9 0 500 1000
5 1500
1' 2000
[CFM]
1000
2000
3000
4000
[m3/h]
256
kg 4.8
35560-2-4013
35561-2-4013
183 1,8
107 1
44
22
70
,5
M5
240 236,4
102
85 8
Core-end sleeves
257
Inlet nozzle p. 550 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
34
60
250
360
350
+2
EC centrifugal, forward
60
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 3-D, 400
Material: Impeller: Sheet aluminium, joined by tabs Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 400
subject to alterations
VDC 48
VDC 36-57
m3/h 3000
rpm 1290
W 200
A 4.20
dB(A) 65
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 2,0 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1480 1450 1440 1480 1290 1270 1260 1285 850 840 835 850 435 435 430 435
LpA [dB(A)] 69 68 62 67 65 64 59 62 56 54 51 53 43 41 38 39
tL [%] 44 68 55 44 68 55 44 68 55 44 68 55
500
A 4' A
UR
A A
400
1,5 4 3'
A A A
UN
300
1,0 3
A A A
200
8 0,5 2' 7 2
A A
100
12
6
11 10
9 1000
5 1500
500
1' 2000
[CFM] [m3/h]
1000
2000
3000
258
kg 5.0
54476-2-4013
1571,8
107 1
90
22
50
M5 268 257
EC-SYSTEMS 259
Inlet nozzle p. 550 Guard grille p. 553 Electr. connection p. 600
85 8
34
60
370
102
404
+2
Core-end sleeves
Contacts
Technology
Accessories
EC centrifugal, forward
66
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 3-D, 400
Material: Impeller: Sheet aluminium, joined by tabs Rotor: Coated in black Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 400
subject to alterations
VDC 48
VDC 36-57
m3/h 3300
rpm 1160
W 192
A 3.90
dB(A) 63
C -25 to +60
p. 600 G)
Electr. connection
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 4' A A 1,5 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1325 1300 1300 1345 1160 1140 1140 1170 795 784 780 795 500 500 500 505
LpA [dB(A)] 69 66 64 68 63 62 59 63 57 56 56 56 49 48 48 49
tL [%] 43 62 53 43 62 53 43 62 53 43 62 53
500
400
UR
A A
300
1,0
3'
A A
UN
A
200
A 8 0,5 7 2 2' A A A
12 11 10
100
9 0 500 1000
5 1500
1 2000
1000
2000
3000
260
kg 5.3
54476-2-4013
1801,8
107 1
90
22
50
M5 268 257
EC-SYSTEMS 261
Inlet nozzle p. 550 Guard grille p. 553 Electr. connection p. 600
85 8
Core-end sleeves
34
60
370
102
404
+2
Contacts
Technology
Accessories
EC centrifugal, forward
66
EC centrifugal, backward
AC centrifugal, forward
Technical features: Over-temperature protected motor Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection Tach output EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC
AC centrifugal, backward
General information
90
EC centrifugal fan
backward curved, 133
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 133
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 4350
W 50
A 0.80
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
n [rpm] 4350 4310 4260 4340 4150 4090 4010 4080 3390 3350 3300 3350 2370 2360 2350 2370
P1 [W] 37 41 46 41 34 36 39 34 20 22 23 22 10 11 11 11
I [A] 0.55 0.60 0.70 0.60 0.60 0.60 0.60 0.60 0.40 0.40 0.40 0.40 0.20 0.20 0.20 0.20
LpA [dB(A)] 75 74 61 60 78 69 58 58 67 58 53 53 52 49 45 44
tL [%] 39 61 45 31 52 47 30 53 46 30 56 46
500
400
1,5
A A 4 A A A 1,0 3 A A
7
300
200
12
A A 0,5
11
A
16 6 15 10 14 13 9 5
100
50
100
150
200
1 250
[CFM] [m3/h]
100
200
300
400
262
kg 1.0
09566-2-4013
731 26 841 13 M4 M4
115 max. 95
58 0,15
72 92,8 133
129
87
85
41 60,6
1050,2
263
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
EC-SYSTEMS
450 +20
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 133
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 133
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 4480
W 52
A 0.40
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
n [rpm] 4480 4450 4390 4460 4150 4090 4010 4080 3390 3350 3300 3350 2370 2360 2350 2370
P1 [W] 43 46 49 45 34 36 39 34 20 22 23 22 10 11 11 11
I [A] 0.30 0.35 0.40 0.35 0.30 0.30 0.30 0.30 0.20 0.20 0.20 0.20 0.10 0.10 0.10 0.10
LpA [dB(A)] 75 74 61 60 78 69 58 58 67 58 53 53 52 49 45 44
tL [%] 31 51 46 31 52 47 30 53 46 30 56 46
500
400
1,5 4
A A A
300
1,0
A A 3 A A
7
200
12
A A 0,5
11
A
16 6 15 10 14 13 9 5
100
50
100
150
200
1 250
[CFM] [m3/h]
100
200
300
400
264
kg 1.0
09566-2-4013
731 26 841 13 M4 M4
115 max. 95
58 0,15
72 92,8 133
129
87
85
41 60,6
1050,2
265
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
EC-SYSTEMS
450 +20
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 175
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 175
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 3970
W 90
A 1.30
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 3970 3870 3810 3790 3180 3110 3120 3110 2270 2240 2240 2240 1310 1295 1285 1290
P1 [W] 72 81 85 88 38 45 46 47 17 20 20 21 6 7 7 7
I [A] 1.10 1.20 1.20 1.30 0.60 0.70 0.70 0.70 0.30 0.35 0.35 0.35 0.10 0.10 0.10 0.10
LpA [dB(A)] 72 67 66 65 65 61 58 56 59 54 50 50 45 40 37 35
tL [%] 45 57 52 39 53 51 38 51 50 40 53 54
600
500
2,0
A A A
400
1,5 4
A A A
300
1,0 3
8
A A A
7
200
2
A A
0,5
12 6 11 16 10 15 14 13 9 5
100
100
200
300
100
200
300
400
500
600
700
266
kg 1.2
09576-2-4013
26
691
14 M4
M4
115 max. 95
58 0,15
125,5
131
175
170
72
450+20
85
62
Brass lead tips
267
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
42
1050,2
EC-SYSTEMS
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 175
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 175
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 4460
W 120
A 1.00
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2,5 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 4460 4350 4300 4260 3800 3730 3710 3710 3110 3070 3060 3040 2170 2150 2150 2130
I [A] 0.75 0.80 0.85 0.85 0.50 0.55 0.55 0.60 0.30 0.30 0.35 0.35 0.15 0.15 0.15 0.15
LpA [dB(A)] 76 69 66 68 71 65 74 64 66 60 58 59 59 54 50 50
tL [%] 57 68 60 56 66 60 51 61 58 40 51 48
700
600
A A A
500
2,0
A A
400
1,5
8
A 3 A A
7
300
1,0
12
A 2 A A
6
200
11
0,5
A
16 10 15 14 13 9 5 400
100
1 [CFM]
100
200
300
200
400
600
800
[m3/h]
268
kg 1.2
09576-2-4013
26
691
14 M4
M4
115 max. 95
58 0,15
125,5
131
175
170
72
450+20
85
62
Brass lead tips
269
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
42
1050,2
EC-SYSTEMS
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 190
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 3370
W 87
A 1.40
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 76 81 84 85 42 46 48 49 27 29 31 32 15 16 17 17
I [A] 1.10 1.20 1.20 1.30 0.70 0.70 0.80 0.80 0.40 0.50 0.50 0.50 0.20 0.30 0.30 0.30
LpA [dB(A)] 70 64 63 60 64 63 58 56 61 56 55 52 58 52 48 45
tL [%] 44 55 55 43 54 56 42 52 53 35 43 44
3370 3250 3220 3190 2715 2690 2670 2655 2310 2285 2265 2260 1780 1760 1750 1745
600
500
2,0
A A A
400
1,5 4
A A A
300
3 1,0
A A
200
7
A A 2 A A
11 6 10
0,5
12
100
16 15 14
13
100
200
300
400
1 [CFM] [m3/h]
100
200
300
400
500
600
700
270
kg 1.3
09576-2-4013
26
691
14
M4
M4
115 max. 95
58 0,15
125,5
450 +20
85
271
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
44,6 62,8
1050,2
EC-SYSTEMS
72 131
190
170
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 190
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 3570
W 105
A 0.90
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2,0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 3570 3490 3440 3410 2950 2880 2860 2840 2510 2480 2470 2450 1940 1920 1900 1890
I [A] 0.65 0.70 0.75 0.75 0.40 0.40 0.45 0.45 0.25 0.30 0.30 0.30 0.15 0.15 0.15 0.15
LpA [dB(A)] 72 66 64 62 65 62 60 57 62 58 57 54 57 54 51 47
tL [%] 47 57 59 44 55 58 43 53 56 37 46 48
600
500
A A A
400
1,5 4
A A A A
300
1,0
8
3 A A
7 11
200
12
2
6
A A
0,5
100
16 15 14 13 10
100
200
300
100
200
300
400
500
600
700
272
kg 1.3
09576-2-4013
26
691
14
M4
M4
115 max. 95
58 0,15
125,5
450 +20
85
273
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
44,6 62,8
1050,2
EC-SYSTEMS
72 131
190
170
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 190
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 3960
W 170
A 2.50
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 3960 3940 3900 4000 3430 3370 3310 3420 2830 2790 2720 2830 1960 1950 1910 1940
I [A] 1.80 1.90 2.00 1.90 1.20 1.30 1.30 1.30 0.80 0.80 0.80 0.80 0.40 0.40 0.40 0.40
LpA [dB(A)] 73 71 68 69 70 66 64 64 64 62 58 60 58 56 50 50
tL [%] 32 48 43 31 47 41 28 45 39 23 37 31
800
700
2,5
A A 4 A A 2,0
600
500
A
8
A 3 A A
400
1,5
300
1,0
12
A A
200
0,5
16 15
11
A 2
6 10
100
14 13 9 5
1 400 [CFM]
100
200
300
200
400
600
800
[m3/h]
274
kg 1.8
09576-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
133 0,3
125,5
170
4x90
8 85 45
0 +2
45
2
Core-end sleeves
275
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 190
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 190
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 4050
W 156
A 1.15
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A A 4 A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
n [rpm] 4050 4040 4010 4090 3490 3460 3250 3535 2925 2915 2900 2930 2040 2050 2040 2060
I [A] 1.10 1.10 1.10 1.00 0.70 0.70 0.70 0.70 0.50 0.50 0.50 0.50 0.20 0.20 0.20 0.20
LpA [dB(A)] 74 72 69 69 70 68 65 65 66 64 60 61 59 56 51 51
tL [%] 35 52 43 33 51 41 33 52 42 33 51 39
800
700
600
500
2,0
A 3 A A
400
12 7
A A
300
1,0
11
A 2
6
200
16 15 10 14 13 9 5 400
A A
100
1 [CFM]
100
200
300
200
400
600
800
[m3/h]
276
kg 1.8
09576-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
133 0,3
125,5
170
4x90
8 85 45
0 +2
45
2
Core-end sleeves
277
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
10
EC centrifugal fan
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 220
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 2620
W 75
A 1.10
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2620 2480 2370 2450 2340 2260 2200 2250 1890 1820 1790 1820 1180 1150 1130 1150
P1 [W] 55 64 71 66 40 48 53 51 22 27 30 28 8 9 10 10
I [A] 0.80 1.00 1.00 1.00 0.60 0.70 0.80 0.80 0.40 0.40 0.50 0.40 0.20 0.20 0.20 0.20
LpA [dB(A)] 69 67 59 63 67 64 57 59 64 60 52 55 56 52 42 43
tL [%] 55 63 47 53 62 47 48 60 45 34 44 33
400
1,5 A A A
300
4 1,0
A A A A
200
8
A 3 A 0,5 A
7 12
100
A 2
11 6 10 14 13 9 5
16 15
200
400
200
400
600
800
1000
278
kg 1.4
09609-2-4013
26
711
21
M4
M4
115 max. 95
58 0,15
450 +20
85
279
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
44 64
1050,2
EC-SYSTEMS
72 159
220
155
252
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
22
EC centrifugal fan
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 220
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 3030
W 105
A 0.80
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 3030 2880 2750 2800 2660 2540 2450 2500 2150 2070 2010 2060 1340 1310 1280 1300
P1 [W] 80 93 102 99 54 64 73 70 30 36 41 39 10 12 13 13
I [A] 0.60 0.70 0.75 0.75 0.40 0.50 0.55 0.55 0.25 0.30 0.30 0.30 0.10 0.10 0.10 0.10
LpA [dB(A)] 71 68 62 66 69 66 59 63 65 62 55 57 58 55 48 45
tL [%] 57 64 48 56 64 48 54 62 48 38 48 36
500
2,0
A A A
400
1,5
A A A A 3 A
300
1,0
200
12
A A
11
0,5
A 2
6
100
16 15 14 13 9 10
200
400
200
400
600
800
1000
280
kg 1.4
09609-2-4013
26
711
21
M4
M4
115 max. 95
58 0,15
450 +20
85
281
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
44 64
1050,2
EC-SYSTEMS
72 159
220
155
252
EC centrifugal, forward
851
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
22
EC centrifugal fan
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 220
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 3590
W 160
A 2.50
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A A 2,5 A A 4 2,0 A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 3590 3360 3260 3330 3110 2890 2810 2870 2510 2350 2280 2330 1590 1520 1470 1500
I [A] 2.00 2.10 2.00 2.10 1.40 1.40 1.40 1.50 0.90 0.80 0.80 0.90 0.30 0.30 0.30 0.30
LpA [dB(A)] 74 70 66 71 72 66 62 66 68 62 56 60 60 52 46 50
tL [%] 47 58 47 45 54 44 43 52 44 31 42 34
800
700
600
500
400
1,5
A A
300
1,0
12
A 2 A A
6
200
0,5
16 15 14
11
100
10
13
200
400
200
400
600
800
1000
282
kg 2.2
09609-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
133 0,3
155
252
4x90
8 85 45
0 +2
min. 44 max. 64
45
2
Core-end sleeves
283
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
22
EC centrifugal fan
backward curved, 220
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 220
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 3560
W 170
A 1.20
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
n [rpm] 3560 3400 3320 3440 3080 3010 3000 3035 2500 2435 2430 2455 1625 1595 1595 1605
I [A] 1.10 1.20 1.20 1.20 0.80 0.90 0.90 0.90 0.50 0.50 0.50 0.50 0.20 0.20 0.20 0.20
LpA [dB(A)] 76 70 67 71 71 67 63 67 67 63 58 61 60 54 48 51
tL [%] 51 53 44 49 53 43 46 52 41 49 52 45
800
700
600
A A
500
2,0
A
8
A A
400
7
A A 2 A
300
1,0
12 11
200
16 10 15 14 13
A A
100
200
400
200
400
600
800
1000
284
kg 2.2
09609-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
133 0,3
155
252
4x90
8 85 45
0 +2
min. 44 max. 64
45
2
Core-end sleeves
285
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
22
EC centrifugal fan
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 225
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 2500
W 95
A 0.75
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 2500 2380 2290 2410 2190 2110 2050 2140 1830 1790 1750 1810 1350 1320 1290 1330
P1 [W] 80 88 94 84 56 61 66 60 34 38 41 36 16 17 19 16
I [A] 0.60 0.65 0.70 0.65 0.45 0.45 0.50 0.45 0.25 0.30 0.30 0.30 0.15 0.15 0.15 0.15
LpA [dB(A)] 69 62 57 62 66 60 54 60 62 57 51 54 56 50 45 45
tL [%] 60 61 45 61 61 45 60 61 44 50 53 39
500
2,0
A A A
400
1,5 4
A A A
300
8
A 1,0 3 A A
200
12
A A
11
0,5
2
16 15 14 13 9 5 600 10 6
A A
100
1 [CFM] [m3/h]
200
400
200
400
600
800
1000
286
kg 1.5
96358-2-4013
851 26 991 28 M4
M4
max. 225,3
72 min. 153
max. 95
450+20
63 89
Brass lead tips
1050,2 2
287
Inlet nozzle p. 550 Electr. connection p. 601
Contacts
Technology
Accessories
85
EC-SYSTEMS
580,15
115
146
223
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
25
EC centrifugal fan
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 225
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2850
W 160
A 2.20
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2,0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 2850 2800 2760 2845 2460 2420 2410 2460 2020 1990 1980 2010 1350 1340 1340 1350
I [A] 1.70 1.90 2.00 1.70 1.10 1.30 1.30 1.20 0.70 0.80 0.80 0.70 0.30 0.30 0.40 0.30
LpA [dB(A)] 70 67 62 66 67 63 59 63 63 61 54 57 56 52 44 35
tL [%] 50 59 45 50 58 44 46 56 42 37 45 32
600
500
A 4 A A
400
1,5
8
A 3 A A
7 12
300
1,0
A A A
200
11
2
6
A A
0,5
100
16 15 14 13 9 5 10
200
400
600
1 [CFM] [m3/h]
200
400
600
800
1000
288
kg 2.3
96358-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
28
M4 M4 M4
max. 115,3
max. 225,3
92 min. 153
1330,3
223
4x90
146
8 85
0 45
+2
45
2
Core-end sleeves
289
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
1 0 25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
25
EC centrifugal fan
backward curved, 225
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 225
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 3010
W 165
A 1.20
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
n [rpm] 3010 2930 2900 2970 2640 2600 2570 2605 2190 2150 2135 2160 1540 1530 1520 1530
I [A] 1.00 1.10 1.20 1.10 0.70 0.80 0.90 0.80 0.50 0.50 0.60 0.50 0.20 0.20 0.30 0.20
LpA [dB(A)] 71 67 63 68 68 64 60 65 65 61 55 59 61 53 47 50
tL [%] 43 52 39 44 57 43 46 56 44 43 55 42
800
700
600
4
A A
500
2,0
A A
400
A A
300
1,0
12 11
A A A 2
6
200
16
100
15 14 13 400
10
200
600
1 [CFM] [m3/h]
200
400
600
800
1000
290
kg 2.3
96358-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
28
M4 M4 M4
max. 115,3
max. 225,3
92 min. 153
1330,3
223
4x90
146
8 85
0 45
+2
45
2
Core-end sleeves
291
Inlet nozzle p. 550 Electr. connection p. 603
Contacts
Technology
Accessories
1 0 25
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
25
EC centrifugal fan
backward curved, 250
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2630
W 145
A 1.90
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] 2,5 [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 2630 2540 2480 2560 2315 2240 2200 2260 1900 1870 1835 1860 1290 1275 1250 1270
I [A] 1.40 1.60 1.80 1.60 1.00 1.20 1.40 1.20 0.70 0.80 0.90 0.80 0.30 0.40 0.40 0.30
LpA [dB(A)] 70 66 61 67 68 63 59 63 66 60 53 58 58 52 44 48
tL [%] 57 60 47 54 60 46 51 58 43 40 49 37
600
500
2,0
A 4 A A
400
1,5 A
8
A A
300
1,0
7 12
A A
200
11
A A 2
0,5
100
16 15 14 13 10
A
6
1 [CFM]
200
400
600
200
400
600
800
1000
1200
[m3/h]
292
kg 2.5
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
31
M4 M4 M4
164,5
255
4x90
85
50
+2
45
25
Core-end sleeves
293
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
5 8
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: PA plastic 6.6, fibreglass-reinforced Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 7 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2760
W 160
A 1.20
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2760 2660 2600 2680 2460 2380 2340 2400 2000 1960 1940 1965 1380 1360 1350 1360
I [A] 0.90 1.10 1.20 1.10 0.70 0.80 0.90 0.80 0.40 0.50 0.50 0.50 0.20 0.20 0.25 0.20
LpA [dB(A)] 71 66 62 68 68 63 59 65 65 60 55 59 58 52 47 50
tL [%] 54 57 42 53 57 42 54 58 42 50 57 43
700
600
A A A
500
2,0
A A
400
A 3 A A A
11
300
1,0
12
200
16
A 2
6
A A
100
15 14 13
10
1 [CFM]
200
400
600
200
400
600
800
1000
1200
[m3/h]
294
kg 2.5
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
31
M4 M4 M4
164,5
255
4x90
85
50
+2
45
25
Core-end sleeves
295
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
5 8
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2490
W 125
A 1.80
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 2490 2380 2330 2410 2110 2040 2010 2070 1700 1660 1650 1670 1040 1030 1030 1040
I [A] 1.30 1.60 1.60 1.40 0.80 1.00 1.10 1.00 0.50 0.60 0.70 0.60 0.20 0.20 0.20 0.20
LpA [dB(A)] 72 66 60 67 71 63 58 64 66 58 52 58 57 50 41 44
tL [%] 62 64 47 58 64 45 56 59 43 40 46 31
500
2,0
A A 4 A A
400
1,5
A 3 A A A
300
1,0
7 12 11
A A 2
6
200
A A A
100
16 15 14 13 9 5 10
0,5
1 [CFM]
200
400
600
200
400
600
800
1000
1200
[m3/h]
296
kg 2.9
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 252,5
min. 172
1330,3
164,5
255
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
297
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2800
W 175
A 1.30
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
I [A] 1.10 1.25 1.25 1.20 0.80 1.00 1.00 0.90 0.50 0.60 0.60 0.60 0.20 0.20 0.20 0.20
LpA [dB(A)] 74 69 63 72 71 66 61 69 67 62 56 62 59 53 46 51
tL [%] 53 59 44 53 58 44 54 60 43 51 57 44
2800 2650 2570 2720 2550 2470 2440 2510 2080 2025 2020 2050 1370 1340 1330 1340
700
600
4
A A A A
8
500
2,0
A 3
7
400
A A
300
1,0
12
A A
11
200
6 16
A 2 A A
100
15 14 13 400
10
200
9 600
200
400
600
800
1000
1200
1400
298
kg 2.9
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 252,5
min. 172
1330,3
164,5
255
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
299
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2570
W 170
A 2.20
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 2570 2440 2420 2580 2220 2100 2090 2220 1820 1730 1720 1810 1220 1180 1180 1210
I [A] 1.90 2.10 2.10 1.90 1.30 1.40 1.50 1.20 0.80 0.90 0.90 0.80 0.30 0.40 0.40 0.30
LpA [dB(A)] 73 66 62 69 71 64 60 65 69 60 54 60 62 52 44 48
tL [%] 62 63 44 60 58 45 54 55 39 43 46 30
500
2,0
A A A
400
1,5 3
8
A A A
300
7
A A 1,0
12
A 2
11 6
200
A A
0,5
A
16 15 14 10
100
200
13 400
600
800
1 [CFM] [m3/h]
200
400
600
800
1000
1200
1400
300
kg 3.0
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 252,5
min. 172
1330,3
164,5
255
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
301
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2510
W 178
A 1.40
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2510 2450 2440 2520 2170 2140 2130 2170 1770 1750 1750 1765 1230 1240 1220 1240
I [A] 1.00 1.20 1.20 1.00 0.75 0.90 0.90 0.80 0.40 0.50 0.50 0.50 0.20 0.30 0.30 0.30
LpA [dB(A)] 73 66 62 68 69 64 59 63 66 58 54 59 59 51 45 48
tL [%] 53 56 41 52 54 40 52 53 39 50 56 43
500
2,0
A 4 A A
400
3
8
A A A A
7
300
1,0
A
12
A 2
11 6
200
A A A A
100
16 15 14 13 400 9 600 5 10
200
1 [CFM]
200
400
600
800
1000
1200
1400
[m3/h]
302
kg 3.0
96359-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 252,5
min. 172
1330,3
164,5
255
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
303
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 3240
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 1
LpA [dB(A)] 77 73 71 73
tL [%] 54 58 52
1000
4,0
800
3,0
600
2,0 3
400
2 1,0
200
400
800
1200
1600
304
kg 4.5
96359-2-4013
45
31 M6
164,5
4x90
102
172
252
225
85 8
0 60
0 +2
164 0,35
Accessories 305
Inlet nozzle p. 550 f. Electr. connection p. 605
Core-end sleeves
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 250
Material: Impeller: Sheet steel, galvanised Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 3580
W 485
A 3.00
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 3580 3460 3460 3520 2830 2830 2830 2830 2000 2000 2000 2000
P1 [W] 380 465 485 440 193 245 260 225 80 100 106 94
I [A] 2.30 3.00 3.00 2.40 1.20 1.50 1.60 1.40 0.50 0.60 0.70 0.60
LpA [dB(A)] 80 77 74 76 75 70 69 69 68 62 59 60
tL [%] 53 58 50 53 58 50 53 58 50
1000
4,0
A A 4 A A
800
3,0
A 3 A A
8
600
2,0
A A
400
1,0
12 11 10
200
1 [CFM] [m3/h]
250
500
750
1000
400
800
1200
1600
306
kg 4.5
96359-2-4013
45
31 M6
164,5
4x90
102
172
252
225
85 8
0 60
0 +2
164 0,35
Accessories 307
Inlet nozzle p. 550 f. Electr. connection p. 605
Core-end sleeves
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
28
EC centrifugal fan
backward curved, 280
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1750
W 145
A 1.90
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1,25 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 1750 1710 1675 1720 1550 1530 1500 1540 1280 1250 1230 1260 880 870 870 880
I [A] 1.40 1.60 1.80 1.50 1.00 1.20 1.30 1.10 0.60 0.70 0.80 0.70 0.30 0.30 0.40 0.30
LpA [dB(A)] 70 63 59 60 66 61 56 57 62 55 51 52 57 51 46 40
tL [%] 51 67 53 49 66 52 45 62 49 36 51 39
350
300
A 4 A A
250
1,00
A
8
A 3 A A
7
0,75
200
150
0,50
A A
12
100
0,25
16 15
11
A A 2
6 10
50
14 13 9 5
200
400
600
800
400
800
1200
1600
308
kg 3.2
96360-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 281,5
min. 190,2
1330,3
182,5
280
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
309
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
5 8
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
31
EC centrifugal fan
backward curved, 280
Material: Impeller: Sheet steel, galvanised Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2000
W 170
A 1.30
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2000 1920 1790 1930 1680 1660 1625 1660 1380 1350 1340 1360 980 970 960 970
I [A] 1.10 1.20 1.20 1.10 0.70 0.90 1.00 0.80 0.50 0.50 0.60 0.50 0.20 0.30 0.30 0.30
LpA [dB(A)] 72 67 61 62 69 64 57 58 65 60 53 53 58 54 48 44
tL [%] 48 60 50 46 61 50 49 60 50 47 60 51
400
1,5 A 4 A A
300
1,0
8
A A A 3 A A A A
11
200
7 12
0,5
100
16 15 10 14 13 9 6
250
500
750
5 1000
1 [CFM]
400
800
1200
1600
2000 [m /h]
3
310
kg 3.2
96360-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
max. 115,3
max. 281,5
min. 190,2
1330,3
182,5
280
4x90
92
8 85
Core-end sleeves
45
0+
45
25
20
311
Inlet nozzle p. 550 f. Electr. connection p. 603
Contacts
Technology
Accessories
5 8
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
31
EC centrifugal fan
backward curved, 280
Material: Impeller: Sheet steel, galvanised Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2420
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A 1 2 3 4
LpA [dB(A)] 77 73 69 71
tL [%] 50 60 48
800
600
2,0
2,5
200
0,5
1,0
1,5
400
400
800
1200
1600
2000
2400
312
kg 5.0
96360-2-4013
35 M6
31
45
47,7
182,5
4x90
102
191
281
280
85 8 0 60
+2 0
164 0,35
Accessories 313
Inlet nozzle p. 550 f. Electr. connection p. 605
Core-end sleeves
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 280
Material: Impeller: Sheet steel, galvanised Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 11 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2600
W 455
A 2.80
C -25 to +40
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A 4 2,5 A A A A 2,0 A 3 1,5 A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 2760 2670 2660 2740 2050 2050 2050 2050 1460 1460 1460 1460
I [A] 2.20 2.50 2.60 2.30 1.00 1.10 1.40 1.20 0.40 0.50 0.60 0.50
LpA [dB(A)] 80 77 73 75 74 71 67 67 67 64 58 57
tL [%] 48 60 45 48 60 45 48 60 45
800
600
400
1,0
200
0,5
2
12 11 10 9 5 1250 6
250
500
750
1000
1500
1 [CFM] [m3/h]
400
800
1200
1600
2000
2400
314
kg 5.0
96360-2-4013
35 M6
31
45
47,7
182,5
4x90
102
191
281
280
85 8 0 60
+2 0
164 0,35
Accessories 315
Inlet nozzle p. 550 f. Electr. connection p. 605
Core-end sleeves
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1700
W 160
A 2.10
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1700 1640 1600 1630 1530 1480 1450 1470 1270 1240 1220 1230 920 900 890 900
I [A] 1.50 1.70 1.90 1.80 1.10 1.30 1.50 1.40 0.70 0.80 0.90 0.90 0.40 0.40 0.50 0.40
LpA [dB(A)] 65 62 58 60 62 60 55 58 58 55 52 53 49 46 43 45
tL [%] 64 75 55 63 75 58 57 73 54 49 64 48
400
1,5 A A 4 A A A A 3 A A A 0,5
11 16 15 10 14 13 9 5 6
300
8
200
12
1,0
A A
100
250
500
750
1000
1 [CFM]
400
800
1200
1600
2000 [m /h]
3
316
kg 3.1
31050-2-4013
31051-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
48
M4 M4 M4
max. 318,5
92 min. 220
211 208,1
4x90
300
85
Core-end sleeves
45
2
25
60
9 0
0+
20
317
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
18
55,5
35
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1925
W 173
A 1.30
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1925 1840 1700 1790 1670 1615 1590 1610 1400 1360 1340 1355 1030 1010 990 1000
I [A] 1.10 1.20 1.20 1.20 0.80 1.00 1.00 1.00 0.50 0.60 0.70 0.70 0.30 0.30 0.30 0.30
LpA [dB(A)] 67 65 59 62 64 61 55 60 59 57 54 56 51 49 45 47
tL [%] 61 71 55 60 71 53 60 73 54 59 72 53
500
2,0
A A A
400
1,5
A A
A A
300
1,0 3
12 7
A A A
200
11
A A 2
0,5
16 15 10 14 13 9 1250 6
100
250
500
750
1000
5 1500
1 [CFM] [m3/h]
400
800
1200
1600
2000
318
kg 3.1
31050-2-4013
31051-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
48
M4 M4 M4
max. 318,5
92 min. 220
211 208,1
4x90
300
85
Core-end sleeves
45
2
25
60
9 0
0+
20
319
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
18
55,5
35
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
EC centrifugal fan
backward curved, 3-D, 310
Material: Impeller: Sheet aluminium, laser-welded Rotor: Galvanised Electronics enclosure: Die-cast aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1770
W 175
A 1.30
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1770 1570 1510 1630 1300 1270 1250 1280 930 910 900 910
I [A] 1.25 1.30 1.30 1.20 0.60 0.70 0.80 0.70 0.30 0.30 0.35 0.30
LpA [dB(A)] 65 60 58 62 56 54 54 56 48 45 45 46
tL [%] 59 65 49 59 65 48 56 67 47
500
2,0
A A A
400
1,5 4
A A A
300
1,0 3
A A A
200
8 7
0,5
2
12 11 10 9 5 6
100
250
500
750
1000
1250
1 1500
[CFM] [m3/h]
600
1200
1800
2400
320
kg 3.2
31050-2-4013
31051-2-4013
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw)
48
M4 M4 M4
max. 318,5
92 min. 220
211 208,1
4x90
300
85
Core-end sleeves
45
2
25
60
9 0
0+
20
321
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
18
55,5
35
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2300
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm]
A A A A 1 2 3 4
LpA [dB(A)] 75 69 71 70
tL [%] 64 67 52
1000
800
3,0 2,5
3,5
600
2,0
1,5
400
2 1,0
200
0,5
500
1000
1500
[CFM]
500
1000
1500
2000
2500
3000
[m3/h]
322
kg 4.4
kg 7.3
kg 7.0
31050-2-4013
31051-2-4013
45
85 8
164 0,35
Core-end sleeves
191,73 1442
2,5
4402 321
48,5
192,43 143,9
2,5
4402
3501
6,40,2
8 85 100050 4200,5
8 85 100050 4200,5
6,40,2
323
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 60
0 +2
EC centrifugal, forward
18
55,5
35
211 208,1
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
erou Dang citor min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des disc dang arge ions dech 5 tes! minu
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2590
W 505
A 3.10
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 380 470 505 460 274 370 410 362 137 175 198 180 42 54 57 54
I [A] 2.30 2.80 3.00 2.70 1.60 2.20 2.40 2.10 0.90 1.10 1.20 1.10 0.30 0.40 0.40 0.40
LpA [dB(A)] 78 74 73 74 75 71 71 71 69 65 64 64 55 52 52 52
tL [%] 63 67 52 63 67 52 63 67 52 63 67 52
2590 2500 2470 2530 2320 2320 2320 2320 1810 1810 1810 1810 1110 1110 1110 1110
1000
3,5
800
3,0
A A A
600
2,5
3 2,0
7
A A A A
1,5
400
12
A
11
2
6
A A A
200
0,5
16 15 14 13 9 5 10
1,0
1 [CFM]
500
1000
1500
500
1000
1500
2000
2500
3000
[m3/h]
324
kg 4.4
kg 7.3
kg 7.0
31050-2-4013
31051-2-4013
45
85 8
164 0,35
Core-end sleeves
191,73 1442
2,5
4402 321
48,5
192,43 143,9
2,5
4402
3501
6,40,2
8 85 100050 4200,5
8 85 100050 4200,5
6,40,2
325
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 60
0 +2
EC centrifugal, forward
18
55,5
35
211 208,1
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
erou Dang citor min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des disc dang arge ions dech 5 tes! minu
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2080
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
LpA [dB(A)] 71 68 66 69
tL [%] 63 67 52
700
2,5
600
4
500
400
1,5 3
300
1,0 2
200
0,5
100
2,0
500
1000
1500
2000
2500
3000
[m3/h]
326
kg 4.5
kg 7.6
kg 7.1
31050-2-4013
31051-2-4013
45
85 8
164 0,35
Core-end sleeves
222,73 1752
2,5
4402 321
48,5
223,53 175
2,5
4402
3501
6,40,2
8 85 100050 4200,5
8 85 100050 4200,5
6,40,2
327
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 60
0 +2
EC centrifugal, forward
18
55,5
35
211 208,1
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2300
W 480
A 3.10
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2300 2215 2170 2220 1900 1900 1900 1900 1560 1560 1560 1560 1200 1200 1200 1200
P1 [W] 370 445 480 448 210 284 312 278 124 158 175 158 57 73 80 70
I [A] 2.35 2.85 3.10 2.85 1.30 1.70 1.80 1.70 0.80 1.00 1.10 1.00 0.40 0.50 0.50 0.50
LpA [dB(A)] 75 71 68 70 69 66 63 66 63 61 57 61 56 54 53 53
tL [%] 62 67 56 62 67 56 62 67 56 62 67 56
800
700
2,8
A A
600
2,4
A A
500
2,0
A A
400
1,6
8 7
A A A 2
11 6
300
1,2
12
A A A
200
0,8
16 15 10 14 5
100
0,4
500
13 1000
1500
1 [CFM]
500
1000
1500
2000
2500
3000
[m3/h]
328
kg 4.5
kg 7.6
kg 7.1
31050-2-4013
31051-2-4013
45
85 8
164 0,35
Core-end sleeves
222,73 1752
2,5
4402 321
48,5
223,53 175
2,5
4402
3501
6,40,2
8 85 100050 4200,5
8 85 100050 4200,5
6,40,2
329
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 60
0 +2
EC centrifugal, forward
18
55,5
35
211 208,1
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1730
W 355
A 4.10
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
LpA [dB(A)] 74 69 66 68
tL [%] 58 70 60
700
2,5
600
2,0
500
400
1,5 3
300
1,0
200
0,5
100
500
1000
1500
2000
2500
3000
3500
330
kg 5.7
kg 9.2
kg 8.8
35560-2-4013
35561-2-4013
45
M6
85 8 60
min. 95,5
Core-end sleeves
max. 148
232,73 1852
2,5
4962 352
48,5
233,53 185
2,5
4962
3801
6,40,2
8 85 100050 4760,5
8 85 100050 4760,5
6,40,2
331
Inlet nozzle p. 550 f. Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
22 ,5
44
236,4
4x90
102
250
360
240
350
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1970
W 500
A 3.15
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1970 1920 1880 1925 1580 1580 1580 1580 1280 1280 1280 1280 910 910 910 910
P1 [W] 390 469 500 476 200 260 290 265 110 144 157 132 44 57 62 48
I [A] 2.50 2.95 3.15 3.00 1.20 1.50 1.70 1.60 0.70 0.90 1.00 0.80 0.30 0.40 0.40 0.40
LpA [dB(A)] 77 73 69 71 71 67 64 64 65 61 58 59 55 52 49 50
tL [%] 56 70 62 56 70 62 56 70 62 56 70 62
800
700
2,8
A A
600
2,4
A A
500
2,0
A A
400
1,6
3
8
A A
300
1,2
7 12
A 2 A A
200
0,8
11 6
100
0,4
16 15 14 13 1000 9 5 10
500
1500
2000
1 [CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
332
kg 5.7
kg 9.2
kg 8.8
35560-2-4013
35561-2-4013
45
M6
85 8 60
min. 95,5
Core-end sleeves
max. 148
232,73 1852
2,5
4962 352
48,5
233,53 185
2,5
4962
3801
6,40,2
8 85 100050 4760,5
8 85 100050 4760,5
6,40,2
333
Inlet nozzle p. 550 f. Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
22 ,5
44
236,4
4x90
102
250
360
240
350
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1630
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
LpA [dB(A)] 72 68 64 67
tL [%] 58 68 57
700
2,5
600
2,0
500
400
1,5
300
1,0
200
2 0,5
100
500
1000
1500
2000
2500
3000
3500
334
kg 5.8
kg 10.0
kg 9.0
35560-2-4013
35561-2-4013
45
M6
85 8 60
min. 120
Core-end sleeves
max. 172,5
256,73 2092
2,5
4962 352
48,5
257,53 209
2,5
4962
3801
6,40,2
8 85 100050 4760,5
8 85 100050 4760,5
6,40,2
335
Inlet nozzle p. 550 f. Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
22 ,5
44
236,4
4x90
102
250
360
240
350
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1770
W 450
A 2.90
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1770 1720 1710 1745 1620 1620 1620 1620 1400 1400 1400 1400 1200 1200 1200 1200
P1 [W] 362 434 450 412 270 360 375 335 182 235 247 218 120 152 160 140
I [A] 2.30 2.75 2.90 2.60 1.60 2.10 2.20 2.00 1.10 1.40 1.50 1.30 0.80 1.00 1.00 0.90
LpA [dB(A)] 73 68 64 67 73 67 63 65 67 64 59 62 62 59 56 57
tL [%] 58 68 57 58 68 57 58 68 57 58 68 57
700
600
A A 4 A A
8
500
2,0
A 3
7
400
1,5
12
A A A
300
1,0
11 16 15 6 10 14
A 2 A A A
200
0,5
100
500
1000
13 1500
1 [CFM] [m3/h]
2000
500
1000
1500
2000
2500
3000
3500
336
kg 5.8
kg 10.0
kg 9.0
35560-2-4013
35561-2-4013
45
M6
85 8 60
min. 120
Core-end sleeves
max. 172,5
256,73 2092
2,5
4962 352
48,5
257,53 209
2,5
4962
3801
6,40,2
8 85 100050 4760,5
8 85 100050 4760,5
6,40,2
337
Inlet nozzle p. 550 f. Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
22 ,5
44
236,4
4x90
102
250
360
240
350
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2035
kW 0.74
A 3.34
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2035 2035 2035 2035 1585 1580 1580 1580 1150 1145 1140 1145
P1 [kW] 0.57 0.69 0.74 0.70 0.28 0.32 0.34 0.33 0.12 0.14 0.15 0.14
I [A] 2.60 3.10 3.30 3.10 1.30 1.50 1.60 1.50 0.60 0.70 0.70 0.60
LwA [dB(A)] 84 81 78 82 76 73 71 73 67 64 63 64
tL [%] 52 64 61 52 71 68 54 74 72
700
600
A A A
500
2,0
A 3 A
400
1,5
A A
300
1,0
A 2
200
0,5
12 11 6
100
10
500
1000
9 1500
5 2000
1000
2000
3000
4000
338
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.3
kg 15.8
kg 18.6
35560-2-4013
35561-2-4013
56,50,6 160,51
190,52
243 240
44
350
22 ,5
120,5 171
3 1,5 5xM6
Cable gland
298,5 242 15
500 380 30
298,5 242 15
500 420
2,5
3 x 100
236,4
60
236,4
2,5
8 x 11
450
4 x 9 15
450
8 x 11
339
Inlet nozzle p. 550 f. Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
70
Nominal data
Type *3G 355
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 2215
kW 0.94
A 3.00
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2205 2215 2215 2215 1825 1805 1790 1800 1335 1315 1315 1310
P1 [kW] 0.70 0.88 0.94 0.85 0.38 0.47 0.49 0.46 0.17 0.20 0.21 0.19
I [A] 2.50 2.80 3.00 2.70 1.50 1.70 1.80 1.90 0.70 0.80 0.90 0.80
LwA [dB(A)] 87 83 80 85 82 77 73 77 72 68 65 67
tL [%] 48 59 53 52 65 58 57 69 60
800
3,0 4 A A A
600
2,0
8
A 3 A A A
400
7
A 2
12
1,0
200
11
10
500
1000
1500
2000
2500
1 [CFM] [m3/h]
1000
2000
3000
4000
340
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.3
kg 15.8
kg 18.6
35560-2-4013
35561-2-4013
56,50,6 160,51
190,52
243 240
44
350
22 ,5
120,5 171
3 1,5 5xM6
Cable gland
298,5 242 15
500 380 30
298,5 242 15
500 420
2,5
3 x 100
236,4
60
236,4
2,5
8 x 11
450
4 x 9 15
450
8 x 11
341
Inlet nozzle p. 550 f. Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
70
Nominal data
Type *3G 355
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 2215
kW 0.94
A 1.50
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2205 2215 2215 2215 1825 1805 1790 1800 1335 1315 1315 1310
P1 [kW] 0.70 0.88 0.94 0.85 0.38 0.47 0.49 0.46 0.17 0.20 0.21 0.19
I [A] 1.30 1.40 1.50 1.40 0.70 0.90 0.90 0.90 0.40 0.40 0.40 0.40
LwA [dB(A)] 87 83 80 85 82 77 73 77 72 68 65 67
tL [%] 48 59 53 52 65 58 57 69 60
800
3,0 4 A A A
600
2,0
8
A 3 A A A
400
7
A 2
12
1,0
200
11
10
500
1000
1500
2000
2500
1 [CFM] [m3/h]
1000
2000
3000
4000
342
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.3
kg 15.8
kg 18.6
35560-2-4013
35561-2-4013
56,50,6 160,51
190,52
243 240
44
350
22 ,5
120,5 171
3 1,5 5xM6
Cable gland
298,5 242 15
500 380 30
298,5 242 15
500 420
2,5
3 x 100
236,4
60
236,4
2,5
8 x 11
450
4 x 9 15
450
8 x 11
343
Inlet nozzle p. 550 f. Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
70
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1460
W 350
A 4.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4
LpA [dB(A)] 73 66 62 66
tL [%] 58 70 60
800
700
600
500
2,0
2,4
2,8
400
1,6
300
200
0,8
1,2
100
0,4
500
1000
1500
1 2000
[CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
344
kg 6.1
kg 10.7
kg 9.9
54476-2-4013
66
85 8
0 60
4 min. 89,4
Core-end sleeves
max. 142
245,73 1982
2,5
5602 382
48,5
246,43 197,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
345
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1460
W 360
A 2.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2,0 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1460 1425 1420 1460 1270 1270 1270 1270 900 900 900 900
I [A] 1.85 2.10 2.20 1.90 1.20 1.40 1.50 1.30 0.50 0.60 0.60 0.50
LpA [dB(A)] 72 67 63 67 68 64 61 63 60 56 52 44
tL [%] 48 67 55 53 67 54 53 67 54
600
500
A 4 A A
400
1,5 A
8
A A
300
7
200
12
1,0
2
11 6
100
10
0,5
500
1000
1500
1 2000
[CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
346
kg 6.1
kg 10.7
kg 9.9
54476-2-4013
66
85 8
0 60
4 min. 89,4
Core-end sleeves
max. 142
245,73 1982
2,5
5602 382
48,5
246,43 197,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
347
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, CCC; VDE, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1320
W 325
A 3.90
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 1
LpA [dB(A)] 72 66 63 66
tL [%] 60 70 57
600
500
400
1,5 4
300
1,0
2,0
200
100
0,5
500
1000
1500
2000
1 [CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
348
kg 6.2
kg 11.0
kg 10.0
54476-2-4013
66
85 8
0 60
4 min.112,3
Core-end sleeves
max. 165
268,73 2212
2,5
5602 382
48,5
269,43 220,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
349
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1365
W 355
A 2.20
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 1
n [rpm] 1365 1335 1320 1350 1080 1080 1080 1080 790 790 790 790
I [A] 1.90 2.05 2.20 2.00 0.95 1.10 1.20 1.00 0.35 0.45 0.45 0.40
LpA [dB(A)] 72 70 65 68 67 63 60 61 60 56 52 53
tL [%] 48 64 54 48 64 54 48 64 54
500
2,0
A A A
400
1,5
A A A
300
3 1,0
8
A A A
200
7 12 11 10 6
100
0,5
500
1000
1500
500
1000
1500
2000
2500
3000
3500
350
kg 6.2
kg 11.0
kg 10.0
54476-2-4013
66
85 8
0 60
4 min.112,3
Core-end sleeves
max. 165
268,73 2212
2,5
5602 382
48,5
269,43 220,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
351
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1400
W 380
A 4.50
C -25 to +40
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 1
LpA [dB(A)] 74 68 65 69
tL [%] 59 68 55
600
500
2,0
400
1,5
300
1,0
200
100
0,5
500
1000
1500
2000
2500
3000
3500
352
kg 6.2
kg 11.0
kg 10.0
54476-2-4013
66
85 8
0 60
4 min.112,3
Core-end sleeves
max. 165
268,73 2212
2,5
5602 382
48,5
269,43 220,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
353
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1410
W 410
A 2.50
C -25 to +40
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2,0 2 3 4 5 6 7 8 9 10 11 12 1
n [rpm] 1410 1370 1375 1420 1110 1110 1110 1110 800 800 800 800
I [A] 2.20 2.45 2.50 2.15 1.00 0.80 1.20 1.00 0.50 0.50 0.50 0.40
LpA [dB(A)] 74 69 66 71 68 63 59 61 60 56 52 53
tL [%] 51 64 54 51 64 54 51 64 54
600
500
A 4 A A
400
1,5 A 3 A A
8
300
1,0
A
7
200
12
0,5
100
11 10
500
1000
1500
2000
1 [CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
354
kg 6.2
kg 11.0
kg 10.0
54476-2-4013
66
85 8
0 60
4 min.112,3
Core-end sleeves
max. 165
268,73 2212
2,5
5602 382
48,5
269,43 220,9
2,5
5602
4091
6,40,2
8 85 100050 5200,5
8 85 100050 5200,5
6,40,2
355
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
0 +2
164 0,35
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
50
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 tes! minu
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1720
kW 0.76
A 3.40
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2,5 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1720 1725 1720 1725 1455 1430 1425 1435 1045 1030 1030 1040
P1 [kW] 0.60 0.72 0.76 0.68 0.35 0.39 0.40 0.37 0.15 0.16 0.16 0.15
I [A] 2.70 3.20 3.40 3.00 1.60 1.80 1.80 1.70 0.70 0.70 0.80 0.70
LwA [dB(A)] 84 80 75 79 79 74 71 73 68 65 63 64
tL [%] 51 62 59 54 69 62 60 74 67
700
600
A A A
500
2,0
A 3 A A
400
1,5
A
7
300
1,0
12
200
11 6
100
0,5
10
500
1000
1500
2000
2500
1 [CFM] [m3/h]
1000
2000
3000
4000
356
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.7
kg 16.2
kg 19.0
54476-2-4013
56,50,6 160,51
187,52 66
5x7
86
0,5
260 257
370
113 164
1,5
5xM6
Cable gland
302,5 246 15
500 380 30
302,5 246 15
500 420
2,5
3 x 100
60
2,5
8 x 11
450
4 x 9 15
450
8 x 11
357
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
257
257
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
22
50 90
Nominal data
Type *3G 400
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1755
kW 0.77
A 2.60
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2,5 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1755 1760 1760 1760 1510 1470 1465 1485 1100 1090 1085 1095
P1 [kW] 0.63 0.75 0.77 0.72 0.40 0.42 0.43 0.41 0.17 0.18 0.18 0.18
I [A] 2.20 2.50 2.60 2.40 1.60 1.60 1.60 1.60 0.80 0.80 0.80 0.80
LwA [dB(A)] 84 80 75 79 80 74 72 74 70 65 64 66
tL [%] 51 62 56 54 69 65 62 78 71
700
600
A A A
500
2,0
A
8
A A
400
1,5
7
A A 2
300
1,0
12
200
0,5
11
100
10
500
1000
1500
2000
5 2500
1 [CFM] [m3/h]
1000
2000
3000
4000
358
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.7
kg 16.2
kg 19.0
54476-2-4013
56,50,6 160,51
187,52 66
5x7
86
0,5
260 257
370
113 164
1,5
5xM6
Cable gland
302,5 246 15
500 380 30
302,5 246 15
500 420
2,5
3 x 100
60
2,5
8 x 11
450
4 x 9 15
450
8 x 11
359
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
257
257
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
22
50 90
Nominal data
Type *3G 400
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1755
kW 0.77
A 1.30
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2,5 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1755 1760 1760 1760 1510 1470 1465 1485 1100 1090 1085 1095
P1 [kW] 0.63 0.75 0.77 0.72 0.40 0.42 0.43 0.41 0.17 0.18 0.18 0.18
I [A] 1.10 1.30 1.30 1.20 0.80 0.80 0.80 0.80 0.40 0.40 0.40 0.40
LwA [dB(A)] 84 80 75 79 80 74 72 74 70 65 64 66
tL [%] 51 62 56 54 69 65 62 78 71
700
600
A A A
500
2,0
A
8
A A
400
1,5
7
A A 2
300
1,0
12
200
0,5
11
100
10
500
1000
1500
2000
5 2500
1 [CFM] [m3/h]
1000
2000
3000
4000
360
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 7.7
kg 16.2
kg 19.0
54476-2-4013
56,50,6 160,51
187,52 66
5x7
86
0,5
260 257
370
113 164
1,5
5xM6
Cable gland
302,5 246 15
500 380 30
302,5 246 15
500 420
2,5
3 x 100
60
2,5
8 x 11
450
4 x 9 15
450
8 x 11
361
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
257
257
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
22
50 90
Nominal data
Type *3G 450
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1365
kW 0.64
A 2.90
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1365 1345 1330 1340 1065 1065 1055 1060 760 760 760 760
P1 [kW] 0.48 0.60 0.64 0.62 0.23 0.29 0.32 0.30 0.10 0.12 0.13 0.12
I [A] 2.20 2.70 2.90 2.80 1.10 1.40 1.50 1.40 0.50 0.60 0.60 0.60
LwA [dB(A)] 80 75 71 73 74 68 66 67 65 59 58 59
tL [%] 57 66 60 58 66 61 57 68 63
500
2,0
A A 4 A
400
1,5 3
A A A
300
8
A A A
7
1,0
200
12
0,5
11
100
10
1000
9 2000
1 3000 [CFM]
1000
2000
3000
4000
5000
6000
[m3/h]
362
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 12.1
kg 22.2
kg 26.0
63045-2-4013
56,5 0,6
227,5 2 75
0,5
5x 86
72
289 284,5
49
450
28
87
140 209
1,5
5xM6
Cable gland
351 294,5 15
630 550 30
351 294,5 15
630 500
2,5
3 x 120
284,5
70
284,5
2,5
8 x 11
580
4 x 9 15
580
8 x 11
363
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 450
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1560
kW 1.01
A 3.20
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] 2,5 [in H O] A A A 4 A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1560 1555 1555 1560 1345 1315 1300 1315 985 970 965 970
P1 [kW] 0.69 0.91 1.01 0.96 0.43 0.53 0.58 0.54 0.19 0.22 0.25 0.23
I [A] 2.30 2.90 3.20 3.10 1.60 2.00 2.00 1.90 0.80 0.90 1.00 0.90
LwA [dB(A)] 83 78 74 77 80 73 70 72 71 65 62 64
tL [%] 58 67 60 60 71 62 62 75 67
600
500
2,0
A A
A A
7
400
1,5 A A 2 1,0
12 11 6
300
200
0,5
100
10
1 [CFM] [m /h]
3
1000
2000
3000
1000
2000
3000
4000
5000
6000
364
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 12.1
kg 22.2
kg 26.0
63045-2-4013
56,5 0,6
227,5 2 75
0,5
5x 86
72
289 284,5
49
450
28
87
140 209
1,5
5xM6
Cable gland
351 294,5 15
630 550 30
351 294,5 15
630 500
2,5
3 x 120
284,5
70
284,5
2,5
8 x 11
580
4 x 9 15
580
8 x 11
365
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 450
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1560
kW 1.01
A 1.60
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] 2,5 [in H O] A A A 4 A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1560 1555 1555 1560 1345 1315 1300 1315 985 970 965 970
P1 [kW] 0.69 0.91 1.01 0.96 0.43 0.53 0.58 0.54 0.19 0.22 0.25 0.23
I [A] 1.10 1.50 1.60 1.50 0.80 1.00 1.00 1.00 0.40 0.50 0.50 0.50
LwA [dB(A)] 83 78 74 77 80 73 70 72 71 65 62 64
tL [%] 58 67 60 60 71 62 62 75 67
600
500
2,0
A A
A A
7
400
1,5 A A 2 1,0
12 11 6
300
200
0,5
100
10
1 [CFM] [m /h]
3
1000
2000
3000
1000
2000
3000
4000
5000
6000
366
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 12.1
kg 22.2
kg 26.0
63045-2-4013
56,5 0,6
227,5 2 75
0,5
5x 86
72
289 284,5
49
450
28
87
140 209
1,5
5xM6
Cable gland
351 294,5 15
630 550 30
351 294,5 15
630 500
2,5
3 x 120
284,5
70
284,5
2,5
8 x 11
580
4 x 9 15
580
8 x 11
367
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 450
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 2165
kW 2.63
A 9.80
C -25 to +50
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 4 A 4,0 5 6 7 8 9 10 11 12 1 2 3 4
n [rpm] 2165 2165 2165 2165 1900 1900 1900 1900 1600 1600 1600 1600
P1 [kW] 1.85 2.33 2.59 2.57 1.25 1.59 1.74 1.74 0.75 0.95 1.04 1.04
I [A] 6.60 8.70 9.80 9.80 4.30 5.90 6.60 6.60 2.60 3.50 3.90 3.90
LpA [dB(A)] 83 81 78 79 79 77 75 75 71 72 70 71
tL [%] 51 68 64 52 68 64 52 68 64
1200
1000
A A
8
800
3,0
A A A
600
2,0
7 12
A A
11
400
6
1,0
200
10
1000
2000
3000
9 4000
5 5000
1 [CFM] [m3/h]
2000
4000
6000
8000
368
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 21.0
kg 36.5
kg 38.5
63045-2-4013
325,5 3 70 255,5 2
75 1,5
0,3
292 284,5
300 485
450
140 209
235
-2
Cable gland
4
392 2,5
15 3
630 -1 480 -1
392 2,5
15 3
630 -1 500 -1
284,5
284,5
580
8 x 11
5800,5
8 x 11
369
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
455
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 450
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 2165
kW 2.63
A 4.90
C -25 to +50
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 4 A 4,0 5 6 7 8 9 10 11 12 1 2 3 4
n [rpm] 2165 2165 2165 2165 1900 1900 1900 1900 1600 1600 1600 1600
P1 [kW] 1.85 2.33 2.59 2.57 1.25 1.59 1.74 1.74 0.75 0.95 1.04 1.04
I [A] 3.30 4.40 4.90 4.90 2.20 3.00 3.30 3.30 1.30 1.80 2.00 2.00
LpA [dB(A)] 83 81 78 79 79 77 75 75 71 72 70 71
tL [%] 51 68 64 52 68 64 52 68 64
1200
1000
A A
8
800
3,0
A A A
600
2,0
7 12
A A
11
400
6
1,0
200
10
1000
2000
3000
9 4000
5 5000
1 [CFM] [m3/h]
2000
4000
6000
8000
370
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 21.0
kg 36.5
kg 38.5
63045-2-4013
325,5 3 70 255,5 2
75 1,5
0,3
292 284,5
300 485
450
140 209
235
-2
Cable gland
4
392 2,5
15 3
630 -1 480 -1
392 2,5
15 3
630 -1 500 -1
284,5
284,5
580
8 x 11
5800,5
8 x 11
371
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
455
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
backward curved, 3-D, 500
Material: Impeller: Sheet aluminium, welded Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type *3G 500
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 810
W 265
A 1.60
C -25 to +40
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 810 765 750 780 645 635 625 650 465 475 475 485
I [A] 1.30 1.50 1.60 1.40 0.70 0.80 0.90 0.80 0.30 0.40 0.40 0.40
LwA [dB(A)] 72 63 59 61 65 58 55 58 56 51 48 52
tL [%] 56 61 49 14 57 63 50 14 59 66 49
250
1,00
A A A
200
0,75 4
A A A
150
0,50
8
A A A
100
2
12
0,25
11
50
10
1000
2000
1000
2000
3000
4000
5000
372
kg 8.8
63072-2-4013
45
M6
85 8 1
Core-end sleeves
373
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 605
Contacts
Technology
Accessories
EC-SYSTEMS
0 50
0 +2
164 0,35
EC centrifugal, forward
49
102
355
505
342 337
470
4x90
EC centrifugal, backward
87
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 500
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1125
kW 0.71
A 3.20
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A 4 A A A 1,25 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1125 1110 1100 1110 920 905 900 900 665 650 650 655
P1 [kW] 0.54 0.66 0.71 0.69 0.29 0.35 0.37 0.36 0.12 0.12 0.13 0.14
I [A] 2.40 3.00 3.20 3.10 1.30 1.60 1.60 1.60 0.60 0.70 0.70 0.70
LwA [dB(A)] 81 74 70 70 75 69 68 68 66 60 58 57
tL [%] 59 69 66 64 75 75 65 78 82
350
300
A 3 A A
250
1,00
A A
0,75
200
A
7
A A
150
0,50
12 6 11
100
0,25
10
50
1000
2000
3000
1000
2000
3000
4000
5000
6000
7000
374
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 13.5
kg 24.3
kg 28.0
63072-2-4013
56,50,6 180,5 1
2392 75
0,5
5x
72
175 233
5xM6
Cable gland
361 304,5 15
630 550 30
361 304,5 15
630 500
2,5
3 x 120
70
2,5
8 x 11
580
4 x 9 15
580
8 x 11
375
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
337
337
Accessories
EC-SYSTEMS
EC centrifugal, forward
342 337
49
470
28
87
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 500
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1160
kW 0.82
A 2.90
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1160 1160 1160 1160 1005 980 970 980 735 725 720 720
P1 [kW] 0.57 0.74 0.82 0.76 0.36 0.43 0.45 0.43 0.15 0.18 0.20 0.19
I [A] 2.10 2.60 2.90 2.70 1.50 1.70 1.80 1.70 0.70 0.80 0.90 0.80
LwA [dB(A)] 83 75 72 71 78 71 68 67 69 62 60 59
tL [%] 58 69 66 63 76 70 69 82 76
400
1,5 4 A A A
300
8
A A A
1,0
A A 2
200
12
0,5
6 11
100
10
1000
2000
9 3000
5 4000
1 [CFM] [m3/h]
1000
2000
3000
4000
5000
6000
7000
376
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 13.5
kg 24.3
kg 28.0
63072-2-4013
56,50,6 180,5 1
2392 75
0,5
5x
72
175 233
5xM6
Cable gland
361 304,5 15
630 550 30
361 304,5 15
630 500
2,5
3 x 120
70
2,5
8 x 11
580
4 x 9 15
580
8 x 11
377
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
337
337
Accessories
EC-SYSTEMS
EC centrifugal, forward
342 337
49
470
28
87
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 500
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1160
kW 0.82
A 1.50
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1160 1160 1160 1160 1005 980 970 980 735 725 720 720
P1 [kW] 0.57 0.74 0.82 0.76 0.36 0.43 0.45 0.43 0.15 0.18 0.20 0.19
I [A] 1.10 1.30 1.50 1.40 0.70 0.90 0.90 0.80 0.40 0.40 0.40 0.40
LwA [dB(A)] 83 75 72 71 78 71 68 67 69 62 60 59
tL [%] 58 69 66 63 76 70 69 82 76
400
1,5 4 A A A
300
8
A A A
1,0
A A 2
200
12
0,5
6 11
100
10
1000
2000
9 3000
5 4000
1 [CFM] [m3/h]
1000
2000
3000
4000
5000
6000
7000
378
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal module with support bracket
kg 13.5
kg 24.3
kg 28.0
63072-2-4013
56,50,6 180,5 1
2392 75
0,5
5x
72
175 233
5xM6
Cable gland
361 304,5 15
630 550 30
361 304,5 15
630 500
2,5
3 x 120
70
2,5
8 x 11
580
4 x 9 15
580
8 x 11
379
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
337
337
Accessories
EC-SYSTEMS
EC centrifugal, forward
342 337
49
470
28
87
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 500
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1700
kW 2.80
A 8.50
C -25 to +50
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1700 1700 1700 1700 1500 1500 1500 1500 1100 1100 1100 1100
P1 [kW] 1.85 2.50 2.65 2.40 1.30 1.70 1.75 1.65 0.57 0.70 0.75 0.70
I [A] 5.80 7.80 8.20 7.20 4.20 5.20 5.40 5.20 2.20 2.60 2.60 2.60
LpA [dB(A)] 82 79 78 77 78 75 74 74 69 67 66 65
tL [%] 57 65 58 60 65 61 56 63 56
1000
4,0
A A 4 A
800
3,0 3 8
A A A 7 2,0 2 A A A
600
400
12 11 1,0
200
10
5 6000
1 [CFM]
2000
4000
6000
8000
10000
380
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 22.0
kg 38.5
kg 41.0
63072-2-4013
319 3 70 249 2
75 2
0,3
342 337-2
355 505
470
175 233
235
-2
Cable gland
384 2,5
15 3
630 -1 550 -1
384 2,5
15 3
630 -1 500 -1
337-2
337-2
580
8 x 11
5800,5
8 x 11
381
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 500
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1700
kW 2.70
A 4.30
C -25 to +60
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 1700 1700 1700 1700 1500 1500 1500 1500 1100 1100 1100 1100
P1 [kW] 1.85 2.50 2.65 2.40 1.30 1.70 1.75 1.65 0.57 0.70 0.75 0.70
I [A] 2.90 3.90 4.10 3.60 2.10 2.60 2.70 2.60 1.10 1.30 1.30 1.30
LpA [dB(A)] 82 79 78 77 78 75 74 74 69 67 66 65
tL [%] 57 65 58 60 65 61 56 63 56
1000
4,0
A A 4 A
800
3,0 3 8
A A A 7 2,0 2 A A A
600
400
12 11 1,0
200
10
5 6000
1 [CFM]
2000
4000
6000
8000
10000
382
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 22.0
kg 38.5
kg 41.0
63072-2-4013
319 3 70 249 2
75 2
0,3
342 337-2
355 505
470
175 233
235
-2
Cable gland
384 2,5
15 3
630 -1 550 -1
384 2,5
15 3
630 -1 500 -1
337-2
337-2
580
8 x 11
5800,5
8 x 11
383
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
backward curved, 3-D, 560
Material: Impeller: Sheet aluminium, welded Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 9 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type *3G 560
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 945
kW 0.79
A 3.50
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A 4 1,25 A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 945 945 945 945 760 735 725 740 520 505 500 505
P1 [kW] 0.47 0.69 0.79 0.71 0.24 0.31 0.34 0.31 0.09 0.11 0.12 0.11
I [A] 2.20 3.10 3.50 3.20 1.20 1.40 1.60 1.40 0.50 0.60 0.60 0.60
LwA [dB(A)] 74 71 70 71 69 67 68 64 72 60 54 54
tL [%] 70 74 66 46 77 81 64 50 82 85 71
350
300
A A 3 A A A
250
1,00
0,75
200
A A 2
7
150
0,50
100
0,25
12 11
50
10
1000
2000
3000
5 4000
1 [CFM]
2000
4000
6000
8000
[m3/h]
384
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
kg 13.9
63071-2-4013
56,50,6 180,5 1
2642 82
0,5
5x
72
195 258
5xM6
Cable gland
385
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
385 380
60
515
30
95
86
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 560
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1350
kW 2.30
A 7.00
C -25 to +55
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A 4 A 2,5 A A 8 A 3 A A 1,5 5 6 7 8 9 10 11 12 1 2 3 4
n [rpm] 1350 1350 1350 1350 1200 1200 1200 1200 910 910 910 910
P1 [kW] 1.33 1.90 2.15 2.10 0.90 1.30 1.55 1.43 0.45 0.60 0.70 0.65
I [A] 4.40 5.80 6.80 4.40 3.20 4.20 5.00 4.60 1.80 2.20 2.40 2.40
LpA [dB(A)] 78 77 74 74 75 73 71 71 67 65 64 64
tL [%] 60 68 63 60 68 62 60 65 63
800
700
600
500
400
2,0
A A
300
1,0
12
2
11
200
0,5
10
100
1 [CFM]
3000
6000
9000
12000
[m3/h]
386
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 23.5
kg 45.5
kg 48.5
63071-2-4013
344 3 70 274 2
82 2
0,3
385 380 -2
398 565
515
195 258
235
-2
Cable gland
416 2,5
15 3
800 -1 550 -1
416 2,5
15 3
800 -1 560 -1
380-2
380-2
8 x 11
750
7500,5
8 x 11
387
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 560
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1350
kW 2.30
A 3.60
C -25 to +60
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 3,0 A 4 A 2,5 A A 8 A 3 A A 1,5 5 6 7 8 9 10 11 12 1 2 3 4
n [rpm] 1350 1350 1350 1350 1200 1200 1200 1200 910 910 910 910
P1 [kW] 1.33 1.90 2.15 2.10 0.90 1.30 1.55 1.43 0.45 0.60 0.70 0.65
I [A] 2.20 2.90 3.40 2.20 1.60 2.10 2.50 2.30 0.90 1.10 1.20 1.20
LpA [dB(A)] 78 77 74 74 75 73 71 71 67 65 64 64
tL [%] 60 68 63 60 68 62 60 65 63
800
700
600
500
400
2,0
A A
300
1,0
12
2
11
200
0,5
10
100
1 [CFM]
3000
6000
9000
12000
[m3/h]
388
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 23.5
kg 45.5
kg 48.5
63071-2-4013
344 3 70 274 2
82 2
0,3
385 380 -2
398 565
515
195 258
235
-2
Cable gland
416 2,5
15 3
800 -1 550 -1
416 2,5
15 3
800 -1 560 -1
380-2
380-2
8 x 11
750
7500,5
8 x 11
389
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 560
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1510
kW 2.90
A 9.20
C -25 to +45
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
P1 [kW] 1.90 2.47 3.05 2.85 0.90 1.30 1.55 1.43 0.45 0.60 0.70 0.65
I [A] 6.00 7.60 9.20 8.80 3.20 4.20 5.00 4.60 1.80 2.20 2.40 2.40
LpA [dB(A)] 81 80 77 76 75 73 71 71 67 65 64 64
tL [%] 52 67 64 60 68 62 60 65 63
1510 1510 1510 1510 1200 1200 1200 1200 910 910 910 910
1000
4,0
A A
3,5
A A
800
3,0
A A A 8 3 A A
600
1,5
400
2,0
2,5
7
12
2 6
1,0
200
0,5
11
10
4000
8000
12000
390
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 27.5
kg 49.5
kg 52.5
63071-2-4013
344 3 70 274 2
82 2
0,3
385 380 -2
398 565
515
195 258
235
-2
Cable gland
416 2,5
15 3
800 -1 550 -1
416 2,5
15 3
800 -1 560 -1
380-2
380-2
8 x 11
750
7500,5
8 x 11
391
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
249,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 560
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1510
kW 3.10
A 4.90
C -25 to +60
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12
P1 [kW] 1.90 2.47 3.05 2.85 0.90 1.30 1.55 1.43 0.45 0.60 0.70 0.65
I [A] 3.00 3.80 4.60 4.40 1.60 2.10 2.50 2.30 0.90 1.10 1.20 1.20
LpA [dB(A)] 81 80 77 76 75 73 71 71 67 65 64 64
tL [%] 52 67 64 60 68 62 60 65 63
1510 1510 1510 1510 1200 1200 1200 1200 910 910 910 910
1000
4,0
A A
3,5
A A
800
3,0
A A A 8 3 A A
600
1,5
400
2,0
2,5
7
12
2 6
1,0
200
0,5
11
10
4000
8000
12000
392
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 27.5
kg 49.5
kg 52.5
63071-2-4013
344 3 70 274 2
82 2
0,3
385 380 -2
398 565
515
195 258
235
-2
Cable gland
416 2,5
15 3
800 -1 550 -1
416 2,5
15 3
800 -1 560 -1
380-2
380-2
8 x 11
750
7500,5
8 x 11
393
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
249,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
backward curved, 3-D, 630
Material: Impeller: Sheet aluminium, welded Rotor: Coated in black Electronics enclosure: Die-cast aluminium Number of blades: 6 Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type *3G 630
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 685
kW 0.53
A 1.00
C -25 to +60
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 685 685 685 685 560 545 540 550 390 385 380 390
P1 [kW] 0.38 0.47 0.53 0.48 0.21 0.23 0.26 0.24 0.08 0.09 0.10 0.10
I [A] 0.70 0.90 1.00 0.90 0.40 0.50 0.50 0.50 0.20 0.20 0.30 0.30
LwA [dB(A)] 73 67 65 64 67 61 59 58 56 52 51 49
tL [%] 57 68 61 61 71 65 63 75 66
250
1,00
A A 4 A A
200
0,75
A 3 A A A
150
0,50
A
7
100
12
0,25
50
11
10
1000
2000
3000
4000
5 5000
1 [CFM] [m3/h]
2000
4000
6000
8000
394
Technical features: Slave output 0-10 V max. 3 mA PFC (passive) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, CCC, GOST are applied for
kg 14.7
63070-2-4013
56,50,6 180,51
296 98,5
0,5
5x 86
72
433 427-2
634
220 290
5xM6
Cable gland
395
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
72
EC centrifugal, backward
37 14
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 630
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1000
kW 1.70
A 5.30
C -25 to +60
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 74 71 70 70 66 64 64 64
tL [%] 54 66 64 54 66 64
900 800
3,0
A A A
700
2,5
600
500 400
2,0
4 1,5
300
1,0 8 7 0,5 6
200 100
2000
4000
5 6000
1 8000
10000
[CFM] [m3/h]
4000
8000
12000
16000
396
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 24.5
kg 47.5
kg 52.0
63070-2-4013
376 3 70 306 2
98,5 2
0,3
433 427-2
447 635
634
220 290
235
-2
Cable gland
463,5 2,5
15 3
800 -1 550 -1
463,5 2,5
15 3
800 -1 630 -1
427-2
427-2
8 x 11
750
750 0,5
8 x 11
397
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 630
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1000
kW 1.70
A 2.80
C -25 to +60
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8
LpA [dB(A)] 74 71 70 70 66 64 64 64
tL [%] 54 66 64 54 66 64
900 800
3,0
A A A
700
2,5
600
500 400
2,0
4 1,5
300
1,0 8 7 0,5 6
200 100
2000
4000
5 6000
1 8000
10000
[CFM] [m3/h]
4000
8000
12000
16000
398
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 24.5
kg 47.5
kg 52.0
63070-2-4013
376 3 70 306 2
98,5 2
0,3
433 427-2
447 635
634
220 290
235
-2
Cable gland
463,5 2,5
15 3
800 -1 550 -1
463,5 2,5
15 3
800 -1 630 -1
427-2
427-2
8 x 11
750
750 0,5
8 x 11
399
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
219,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 630
subject to alterations
VAC 3~ 200-240
Hz 50/60
rpm 1200
kW 2.80
A 8.40
C -25 to +45
p. 608 M)
(1) Nominal data in operating point with maximum load and 200 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12
P1 [kW] 1.95 2.44 2.70 2.80 1.29 1.61 1.78 1.83 0.81 1.01 1.12 1.15
I [A] 5.90 7.40 8.20 8.40 4.00 4.80 5.40 5.60 2.40 3.00 3.40 3.40
LwA [dB(A)] 88 83 82 82 85 80 79 79 82 77 75 75
tL [%] 52 64 64 52 64 64 52 64 64
1200 1200 1200 1200 1050 1050 1050 1050 900 900 900 900
900
800
3,0 A A A 2,5
700 600
4
A A
2,0
A 8 A 3 A
12
1,5
7 2 6
1,0
11
200
0,5
10
100
9 0 2000 4000 6000 8000 5 1 10000
[CFM] [m3/h]
4000
8000
12000
16000
400
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST
kg 28.5
kg 51.5
kg 56.0
63070-2-4013
376 3 70 306 2
98,5 2
0,3
433 427-2
447 635
634
220 290
235
-2
Cable gland
463,5 2,5
15 3
800 -1 550 -1
463,5 2,5
15 3
800 -1 630 -1
427-2
427-2
8 x 11
750
750 0,5
8 x 11
401
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
249,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
Nominal data
Type *3G 630
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1200
kW 2.80
A 4.20
C -25 to +55
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12
P1 [kW] 1.95 2.44 2.70 2.80 1.29 1.61 1.78 1.83 0.81 1.01 1.12 1.15
I [A] 3.00 3.70 4.10 4.20 2.00 2.40 2.70 2.80 1.20 1.50 1.70 1.70
LwA [dB(A)] 88 83 82 82 85 80 79 79 82 77 75 75
tL [%] 52 64 64 52 64 64 52 64 64
1200 1200 1200 1200 1050 1050 1050 1050 900 900 900 900
900
800
3,0 A A A 2,5
700 600
4
A A
2,0
A 8 A 3 A
12
1,5
7 2 6
1,0
11
200
0,5
10
100
9 0 2000 4000 6000 8000 5 1 10000
[CFM] [m3/h]
4000
8000
12000
16000
402
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 28.5
kg 51.5
kg 56.0
63070-2-4013
376 3 70 306 2
98,5 2
0,3
433 427-2
447 635
634
220 290
235
-2
Cable gland
463,5 2,5
15 3
800 -1 550 -1
463,5 2,5
15 3
800 -1 630 -1
427-2
427-2
8 x 11
750
750 0,5
8 x 11
403
Inlet nozzle p. 550 f. Guard grille p. 553 Electr. connection p. 608
Contacts
Technology
Accessories
EC-SYSTEMS
8xM10
8x45
EC centrifugal, forward
249,5 1
252
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
404
406
405 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward
Contacts
Technology
Accessories
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2340
W 370
A 1.70
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2340 2270 2240 2290 1910 1910 1910 1910 1410 1410 1410 1410 910 910 910 910
P1 [W] 265 335 370 335 160 205 240 205 80 98 112 103 40 42 46 44
I [A] 1.20 1.50 1.70 1.50 0.70 0.90 1.00 0.90 0.40 0.40 0.50 0.50 0.20 0.20 0.20 0.20
LpA [dB(A)] 74 71 70 70 69 67 66 66 61 59 58 57 50 47 47 48
tL [%] 63 66 48 63 66 48 63 66 48 63 66 48
800
700
600
500
2,0
3
8
A A A
1,5
400
A A
300
1,0 2
12 11 6
A A A
200
0,5
100
16 15 14 13
10
250
500
750
1000
5 1250
1 [CFM]
400
800
1200
1600
2000
2400
[m3/h]
406
kg 4.3
kg 7.1
31050-2-4013
31051-2-4013
45
Y 1640,35
View Y
View X
(1) (2)
PE L
RSB
48,5
192,43 143,9
2,5
4402
171
WARNING!
81
4200,5
6,40,2
407
Inlet nozzle p. 550 f. Guard grille p. 553 Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
3501
Accessories
EC-SYSTEMS
EC centrifugal, forward
18
55,5
211 208,1
35
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
Nominal data
Type *3G 310
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2200
W 455
A 2.00
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 2200 2150 2130 2170 1800 1800 1800 1800 1400 1400 1400 1400 1000 1000 1000 1000
P1 [W] 345 430 455 420 200 265 285 260 90 118 128 113 33 44 47 41
I [A] 1.50 1.90 2.00 1.80 0.90 1.20 1.20 1.10 0.40 0.50 0.60 0.50 0.10 0.20 0.20 0.20
LpA [dB(A)] 73 70 68 69 68 65 63 64 61 59 57 58 52 48 48 49
tL [%] 60 64 54 60 64 54 60 64 54 60 64 54
700
600
4
A A A
500
2,0
A 3 A A A
1,5
400
300
1,0
12
A 2 A A
6
200
0,5
11
A A
10
100
16 15 14 13
500
1000
5 1500
1 [CFM]
500
1000
1500
2000
2500
3000
[m3/h]
408
kg 5.4
kg 8.2
31050-2-4013
31051-2-4013
45
Y 1640,35
View Y
View X
(1) (2)
PE L
RSB
48,5
223,53 175
2,5
4402
171
WARNING!
81
4200,5
6,40,2
409
Inlet nozzle p. 550 f. Guard grille p. 553 Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
3501
Accessories
EC-SYSTEMS
EC centrifugal, forward
18
55,5
211 208,1
35
4x90
102
220
318
300
EC centrifugal, backward
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1840
W 430
A 1.90
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1840 1790 1770 1820 1540 1540 1540 1540 1260 1260 1260 1260 890 890 890 890
P1 [W] 335 405 430 365 200 256 277 235 115 150 159 125 55 67 70 59
I [A] 1.50 1.80 1.90 1.60 0.90 1.10 1.20 1.00 0.50 0.70 0.70 0.50 0.20 0.30 0.30 0.30
LpA [dB(A)] 75 70 66 67 70 66 63 63 64 60 56 57 55 52 49 49
tL [%] 56 70 58 56 70 58 56 70 58 56 70 58
700
600
4
A A A
2,0
500
A A A A
400
1,5
300
12
A A
1,0
200
0,5
16 15
11 6
A A A
100
10 14 13 1000 9 5
1 [CFM]
500
1500
500
1000
1500
2000
2500
3000
[m3/h]
410
kg 5.4
kg 8.7
35560-2-4013
35561-2-4013
45
M6
,5
236,4
View Y
View X
(1) (2)
48,5
233,53 185
2,5
4962
188
WARNING!
94
4760,5
6,40,2
411
Inlet nozzle p. 550 f. Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
3801
Accessories
PE L
RSB
EC-SYSTEMS
Y X 164 0,35
4x90
102
240
350
EC centrifugal, forward
22
44
250
360
EC centrifugal, backward
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
Nominal data
Type *3G 355
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1710
W 395
A 1.80
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
n [rpm] 1710 1660 1650 1670 1400 1400 1400 1400 1200 1200 1200 1200 1000 1000 1000 1000
P1 [W] 305 375 395 365 166 225 245 216 105 150 172 136 60 82 90 80
I [A] 1.30 1.60 1.80 1.60 0.70 1.00 1.10 0.90 0.50 0.70 0.80 0.60 0.30 0.40 0.40 0.40
LpA [dB(A)] 72 67 64 66 65 63 60 61 60 58 56 57 55 53 51 53
tL [%] 58 68 57 58 68 57 58 68 57 58 68 57
600
500
2,0
A 4 A A
400
1,5 A 3 A A A 1,0
7 12
300
A 2
11
200
16 6 15 10 14
A A A
100
0,5
13
500
1000
9 1500
500
1000
1500
2000
2500
3000
3500
412
kg 5.5
kg 8.9
35560-2-4013
35561-2-4013
45
M6
,5
236,4
View Y
View X
(1) (2)
48,5
257,53 209
2,5
4962
188
WARNING!
94
4760,5
6,40,2
413
Inlet nozzle p. 550 f. Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
3801
Accessories
PE L
RSB
EC-SYSTEMS
Y X 164 0,35
4x90
102
240
350
EC centrifugal, forward
22
44
250
360
EC centrifugal, backward
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: VDE, UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
70
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1470
W 370
A 1.65
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
n [rpm] 1470 1430 1420 1470 1300 1300 1300 1300 910 910 910 910
P1 [W] 323 362 370 319 210 255 270 230 90 100 108 92
I [A] 1.45 1.60 1.65 1.40 0.90 1.10 1.20 1.00 0.40 0.40 0.50 0.40
LpA [dB(A)] 73 69 64 66 71 65 61 64 61 57 53 51
tL [%] 53 68 52 53 68 52 53 68 52
600
500
2,0
A A A
400
1,5 A
8
A 3 A A
300
1,0
7
200
12
2 0,5
11 6
100
10
500
1000
1500
1 2000
[CFM] [m3/h]
500
1000
1500
2000
2500
3000
3500
414
kg 5.8
kg 9.8
54476-2-4013
Y 164 0,35
View Y
View X
(1) (2)
48,5
246,43 197,9
2,5
5602
210
WARNING!
94
5200,5
6,40,2
415
Inlet nozzle p. 550 f. Guard grille p. 553 Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
4091
Accessories
PE L
RSB
EC-SYSTEMS
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
50
Nominal data
Type *3G 400
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1420
W 380
A 1.70
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
n [rpm] 1420 1395 1370 1415 1120 1120 1120 1120 800 800 800 800
I [A] 1.45 1.55 1.70 1.45 0.80 0.90 1.00 0.80 0.40 0.40 0.40 0.40
LpA [dB(A)] 73 71 66 69 68 65 60 61 60 58 53 54
tL [%] 40 64 54 40 64 54 40 64 54
600
500
2,0
A 4 A A
400
1,5 A A
300
1,0
3
8
A A
200
12
0,5
100
11 6 10 9 5
500
1000
1500
500
1000
1500
2000
2500
3000
3500
416
kg 5.9
kg 9.9
54476-2-4013
Y 164 0,35
View Y
View X
(1) (2)
48,5
269,43 220,9
2,5
5602
210
WARNING!
94
5200,5
6,40,2
417
Inlet nozzle p. 550 f. Guard grille p. 553 Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
4091
Accessories
PE L
RSB
EC-SYSTEMS
EC centrifugal, forward
90
4x90
102
268
404
257
370
EC centrifugal, backward
! Capa Tensps de ING !Tem RN ION NT WA TE AT
min! 5 teurs ges! time ensa e ses! cond s voltaharg ereu des erou disc dang arge Dang citor ions dech 5 minu tes!
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
50
Nominal data
Type *3G 450
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1225
kW 0.50
A 2.20
C -25 to +40
p. 606 K2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[in H O] [Pa] A A A 4 A A A A 3 A A 8 A A 9 10 11 12 7 8 1 2 3 4 5 6
n [rpm] 1225 1225 1225 1225 1000 1000 1000 1000 700 700 700 700
P1 [kW] 0.35 0.49 0.50 0.47 0.19 0.26 0.28 0.26 0.07 0.09 0.10 0.09
I [A] 1.50 2.10 2.20 2.10 0.80 1.20 1.20 1.10 0.30 0.40 0.40 0.40
LpA [dB(A)] 68 64 64 63 63 59 59 57 55 49 49 48
tL [%] 65 67 62 65 67 62 65 67 62
400
300
1,2
200
0,8
A A
6 12 0,4
100
11 10
9 0 1000 2000
5 3000
1 [CFM] [m3/h]
1000
2000
3000
4000
5000
418
kg 11.5
kg 25.4
63045-2-4013
44,50,6 148,51
227,52 75
5x
86
,5
72
291 289
450
5xM6
140 209
1,5
View Y
View X
(1) (2)
PE L
30 353,5 294,5 15 630-1 500-1
RSB
2,5
4x9 15 5800,5
8x11
419
Inlet nozzle p. 550 f. Guard grille p. 553 Connection lead p. 559 Electr. connection p. 606
Contacts
Technology
284,5
360 120
Accessories
EC-SYSTEMS
EC centrifugal, forward
49
EC centrifugal, backward
AC centrifugal, forward
Technical features: Operation and alarm display: Reversible voltage output 0 V / +15 V (max. 50 mA) PFC (active) Over-temperature protected electronics / motor RS485 ebmBUS EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Electrical connection: Via connection lead with plug (accessory) Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: UL, CSA, VDE, CCC, GOST are applied for
AC centrifugal, backward
General information
28
87
420
EC centrifugal fans and blowers, single inlet, 24 / 48 VDC EC centrifugal fans and blowers, single inlet, line-fed EC centrifugal blowers, dual inlet, 24 / 48 VDC EC centrifugal blowers, dual inlet, line-fed
421
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 085 *1G 085
subject to alterations
VDC 24 48
m3/h 95 95
W 14 14
A 0.64 0.32
dB(A) 57 57
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 59 57 57 57 57 55 55 54 46 44 44 42 tL [%] 28 32 37 28 32 37 25 30 33 9 5 4 4 3
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A A A A 4 A A A 1 2 3 4 1 2 3 4 5 6 7 8
P1 [W] 19 16 15 12 14 12 11
3180 3300 3500 3800 2850 3000 3180 3400 1890 1970 2070 2170
240
4'
200
160
0,6
0,8
UR
UN
120
0,4 3
3'
A A
80
8 0,2 2 7 2'
40
20
40
60
80
422
Technical features: Control input 0-10 VDC / PWM Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (48 VDC) CCC
kg 0.5 0.5
Centrifugal blower with flange G1G 085-AB05 -01 G1G 085-AB07 -01
kg 0.8 0.8
68 1 45,4 1
M4
34
59
67 85
60 30020
Brass lead tips
42
470,15
76 66 5,5 56 4,5
117,5 3
34,5
3x1 2
58
42
65 -1
39
68
127,5
71,5 6 60 80 300
423
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 600
Contacts
Technology
84
Accessories
60,2
EC-SYSTEMS
M4
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 097 *1G 097
subject to alterations
VDC 24 48
m3/h 95 95
W 16 16
A 0.75 0.38
dB(A) 59 59
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 62 61 59 58 59 58 56 55 45 45 43 42 tL [%] 41 48 48 41 48 48 38 46 47 4 4 4 3
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A 4' A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 2920 3030 3300 3700 2650 2730 2960 3290 1615 1650 1745 1880
P1 [W] 22 21 17 13 16 15 13 10
280
UR
1,0
A A A
240
200
0,8
A 3' A A 3 A A
160
0,6
UN
120
0,4
80
0,2
8 2' 7
40
6 5 0 10 20 30 40 50
1 60
20
40
60
80
100
424
Technical features: Control input 0-10 VDC / PWM Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (48 VDC) CCC
kg 0.5 0.5
Centrifugal blower without flange G1G 097-AA05 -01 G1G 097-AA07 -01
kg 0.8 0.8
33 1 49,4 1
M4
34
77,5 97
59
60 30020
Brass lead tips
25
470,15
143 75 18 40
56 ,5
3 24
46
75
3 6
300
3x1 20
60
425
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 600
Contacts
Technology
80
96
137
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 108 *1G 108
subject to alterations
VDC 24 48
W 42 42
A 2.00 1.00
dB(A) 65 65
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 67 66 65 64 65 64 63 63 61 58 55 55 tL [%] 33 41 33 33 41 33 33 41 33
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8
P1 [W] 55 52 43 35 42 40 32 26 20 17 14 11
3230 3410 3800 4100 3000 3140 3420 3690 2300 2380 2550 2720
500
2,0
A A
4'
UR
A A
400
1,5
4
A A
300
1,0
3'
A A
UN
3
200
8
0,5
2' 2
6
100
20
40
60
80
100
1 120
40
80
120
140
180
426
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
kg 0.7 0.7
Centrifugal blower with flange G1G 108-AB17 -02 G1G 108-AB41 -02
kg 1.4 1.4
63 1 55 1
M4
84 108
72
58
85 45020
Brass lead tips
52
58 0,15
115 97 8
159
83
66
50
76
87-1
6 85 45020 82
M4 71
427
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 600
Contacts
Technology
118
183
Accessories
79
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 120 *1G 120
subject to alterations
VDC 24 48
W 40 40
A 1.90 0.95
dB(A) 62 62
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 63 62 61 62 62 60 58 58 55 54 53 54 tL [%] 58 60 55 59 62 55 58 61 54
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 1 2 3 4 5 6 7 8
P1 [W] 50 47 44 36 40 36 32 25 24 21 18 14
2410 2620 2870 3200 2200 2410 2600 2880 1870 1990 2100 2310
500
2,0
A A
UR
A A
400
1,5
4'
A A
300
1,0
UN
3' 3 8
A A A
200
0,5
7 2 6
2'
100
50
100
1 150
1'
[CFM] [m3/h]
40
80
120
160
200
240
428
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
kg 0.8 0.8
Centrifugal blower with flange G1G 120-AB67 -02 G1G 120-AB71 -02
kg 1.6 1.6
83 1 551
M4
97 120
72
58
85 45020
Brass lead tips
62
58 0,15
115 100 7
178
83
68
50
76
98
100 -1
M4 86 82
6 85 98 450 20
429
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 600
Contacts
Technology
132
190
Accessories
82
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 133 *1G 133
subject to alterations
VDC 24 48
W 40 45
A 2.20 1.10
dB(A) 64 64
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 66 66 64 66 64 64 62 63 60 59 58 59 tL [%] 47 49 32 49 51 33 50 53 35
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 2170 2410 2750 3200 2000 2230 2540 2920 1750 1910 2120 2370
P1 [W] 57 51 44 36 45 40 35 27 28 24 20 15
500
2,0
A 4' A A
400
1,5 4 3'
UR UN
A A A
300
3 1,0 8
A A
200
7 2' 2 0,5 6
100
5 0 40 80 120
1' [CFM]
40
80
120
160
200
240
[m3/h]
430
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Lateral Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (24 VDC) UL, CSA, A (48 VDC) CCC
kg 0.7 0.7
Centrifugal blower without flange G1G 133-DE19 -02 G1G 133-DE03 -02
kg 1.3 1.3
66 1 551
M4
108 133
72
58
85 45020
Brass lead tips
46
58 0,15
59
112
180
140
81
85 45020
431
Inlet nozzle p. 552 Electr. connection p. 600
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 140 *1G 140
subject to alterations
VDC 24 48
W 54 54
A 2.50 1.30
dB(A) 63 63
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 64 61 59 60 63 59 58 58 60 56 54 53 tL [%] 50 54 40 51 54 40 50 53 41
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 1850 2020 2200 2550 1750 1900 2030 2310 1500 1580 1670 1880
P1 [W] 65 61 57 43 54 50 45 32 34 29 25 19
400
1,5 A 4' A A
300
UN
1,0 4 3'
UR
A A
A A
200
7 0,5 2 6
2'
100
50
100
150
5 200
1' 250
[CFM] [m3/h]
100
200
300
400
432
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: A (48 VDC) CCC
kg 1.0 1.0
Centrifugal blower with flange G1G 140-AV17 -02 G1G 140-AV21 -02
kg 2.3 2.3
72 1 68,2 1
M4
121 140
72
58
85 45020
Brass lead tips
59
58 0,15
120
105
92
94
118-1
M4 6 85 107
100 1
433
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 600
Contacts
Technology
45020
158
max. 262,6
Accessories
6,6
130 115
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 146 *1G 146
subject to alterations
VDC 24 48
W 100 100
A 5.00 2.60
dB(A) 68 67
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 70 67 66 67 68 65 64 65 63 60 61 61 59 55 55 55 tL [%] 45 49 45 46 49 45 46 49 45 46 49 45
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
n [rpm]
A A A A A 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12
2400 2650 3000 3300 2200 2445 2750 3025 1890 2075 2250 2335 1520 1670 1815 1920
700
2,5 4'
3,0
600
4
A A
2,0
UR
3'
A A
500
1,5
400
UN
A A
300
1,0
8 7
12 11
A 2' A 2 A A A
200
0,5
6
10
100
5 250
1' 300
[CFM] [m3/h]
100
200
300
400
500
434
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA, CCC (centrifugal blower only)
kg 1.4 1.4
Centrifugal blower with flange G1G 146-BA07 -52 G1G 146-BA11 -52
kg 2.8 2.8
M4
58
0, 15
32,7
120
105
92
94
125,5-1
M4 6 85 108
100 1
435
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 600
Contacts
Technology
450 +20
158
max. 262,6
Accessories
6,3
130 115
EC-SYSTEMS
EC centrifugal, forward
72 1 65 1
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *1G 160 *1G 160
subject to alterations
VDC 24 48
W 105 105
A 5.80 2.90
dB(A) 67 67
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 68 67 67 69 67 66 65 67 62 62 62 63 tL [%] 52 57 52 52 57 44 52 57 54
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 1890 2200 2500 2900 1750 2030 2270 2550 1580 1810 2000 2200
900 800
3,0
A A 4'
700
UR
A A
600
4 2,0
A A 3'
UN
8 3
A A
7 1,0 2' 2 6
200 100
5 0 100 200
1 300
100
200
300
400
500
436
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Axial Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA
kg 1.4 1.4
Centrifugal blower with flange G1G 160-BH29 -52 G1G 160-BH39 -52
kg 2.8 2.8
M4
58
0, 15
32,7
max. 227,8
120
105
92
94
130 -1
M4 6 85 108
100 1
437
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 600
Contacts
Technology
450 +20
175
max. 262,6
Accessories
103
EC-SYSTEMS
EC centrifugal, forward
72 1 65 1
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type *3G 108
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 2960
W 60
A 0.90
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 60 53 42 34 38 34 25 19 23 20 16 12 9 8 7 6
I [A] 0.90 0.80 0.60 0.50 0.55 0.50 0.40 0.30 0.35 0.30 0.25 0.20 0.20 0.20 0.20 0.20
LpA [dB(A)] 64 62 60 59 61 60 57 55 56 55 52 50 46 44 40 40
tL [%] 42 44 32 42 44 32 42 44 32 42 44 32
2960 3100 3370 3560 2570 2660 2820 2920 2150 2200 2320 2390 1400 1425 1490 1530
400
1,5
A A
4
A A
3
300
1,0
A A
A
7
200
A A
12
A
0,5
11 2 6 16 15 14 13 9 5 10
100
A A
25
50
75
100
125
1 150
[CFM] [m3/h]
40
80
120
160
200
240
438
kg 1.0
kg 1.7
731 26 681 M4 M4
115 max. 95
450+20
58 0,15
72 84 108
52 6
1050,2
115 97
159 79
Accessories
83 66
50
76
168,5
87-1
82 110,5
450+20
85
71
M4
439
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Contacts
Technology
118
183
EC-SYSTEMS
85
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 108
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 2800
W 50
A 0.38
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 50 44 33 25 38 34 25 19 23 20 16 12 9 8 7 6
I [A] 0.38 0.35 0.25 0.20 0.30 0.25 0.20 0.15 0.20 0.15 0.15 0.10 0.10 0.10 0.10 0.10
LpA [dB(A)] 64 62 60 59 61 60 57 55 56 55 52 50 46 44 40 40
tL [%] 42 44 32 42 44 32 42 44 32 42 44 32
2800 2950 3120 3260 2570 2660 2820 2920 2150 2200 2320 2390 1400 1425 1490 1530
300
4
A A A 1,0
3
A A
200
7
A A
12
A
11 2 6
0,5
A A
100
16 15 14 13 9
A A
10
25
50
75
100
125
150
[CFM] [m3/h]
40
80
120
160
200
240
440
kg 1.0
kg 1.7
731 26 681 M4 M4
115 max. 95
450+20
58 0,15
72 84 108
52 6
1050,2
115 97
159 79
Accessories
83 66
50
76
168,5
87-1
82 110,5
450+20
85
71
M4
441
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Contacts
Technology
118
183
EC-SYSTEMS
85
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 120
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 2320
W 46
A 0.70
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 46 40 33 24 34 29 24 18 24 20 17 13 13 12 10 8
I [A] 0.70 0.60 0.50 0.40 0.50 0.45 0.40 0.30 0.40 0.30 0.30 0.20 0.20 0.20 0.20 0.20
LpA [dB(A)] 61 59 58 57 59 57 55 54 54 52 51 51 48 45 44 44
tL [%] 52 58 51 50 54 52 50 54 52 50 54 52
2320 2490 2640 2880 2060 2190 2295 2445 1830 1920 2010 2115 1430 1500 1580 1640
300
A A A
1,0
A
8 3
A A A
200
12 7
A A
2
0,5
11 16 6 15 10 14
A A A
100
13
25
50
75
100
125
150
[CFM] [m3/h]
40
80
120
160
200
240
442
kg 1.1
kg 1.8
73 1 26 721 M4 M4
115 max. 95
450 +20
580,15
72 97 120
62 6
1050,2
115 100
178
Accessories
82
83 68
50
76
98
100-1
M4
82 110
450 +20
443
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Contacts
Technology
132
85
86
82
190
EC-SYSTEMS
85
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 120
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 2200
W 41
A 0.30
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 41 34 28 20 34 29 24 18 24 20 17 13 13 12 10 8
I [A] 0.30 0.25 0.20 0.15 0.25 0.20 0.20 0.15 0.20 0.15 0.15 0.10 0.10 0.10 0.10 0.10
LpA [dB(A)] 62 59 57 57 59 57 55 54 54 52 51 51 48 45 44 44
tL [%] 51 55 49 50 54 52 50 54 52 50 54 52
2200 2320 2440 2600 2060 2190 2295 2445 1830 1920 2010 2115 1430 1500 1580 1640
300
A A A 1,0
4 8
A A
3
200
12 7
A A A A A
0,5
11 16 6 15 10 14 2
100
A A
13
25
50
75
100
125
150
[CFM] [m3/h]
40
80
120
160
200
240
444
kg 1.1
kg 1.8
73 1 26 721 M4 M4
115 max. 95
450 +20
580,15
72 97 120
62 6
1050,2
115 100
178
Accessories
82
83 68
50
76
98
100-1
M4
82 110
450 +20
445
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Contacts
Technology
132
85
86
82
190
EC-SYSTEMS
85
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 133
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 2000
W 42
A 0.60
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 42 37 30 23 30 26 21 17 18 16 13 10 9 8 7 6
I [A] 0.60 0.55 0.45 0.35 0.45 0.40 0.30 0.25 0.30 0.25 0.20 0.20 0.20 0.20 0.20 0.20
LpA [dB(A)] 64 62 60 58 60 59 56 56 55 54 51 50 49 47 44 41
tL [%] 42 52 51 45 53 51 45 53 51 45 53 51
2000 2140 2310 2460 1780 1870 1995 2120 1495 1570 1640 1730 1100 1140 1200 1250
300
A A 4 1,0 A A A
200
3
8
A A
A A
0,5
12 11 6 16 15 14 13 9 5 10
100
A A A
25
50
75
100
40
80
120
160
200
240
446
kg 1.0
kg 1.5
731 26 551 M4
M4
EC centrifugal, forward
115 max. 95
450+20
58 0,15
72 108 133
46
Brass lead tips
1050,2
171 59 4x90 71
Accessories
87
45
112-1
450 +20
92,5
447
Inlet nozzle p. 552 Electr. connection p. 601
Contacts
Technology
14
85
79
180
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 133
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 1925
W 38
A 0.30
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 38 34 27 21 30 26 21 17 18 16 13 10 9 8 7 6
I [A] 0.30 0.25 0.20 0.15 0.25 0.20 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 0.10
LpA [dB(A)] 63 62 60 59 60 59 56 56 55 54 51 50 49 47 44 41
tL [%] 45 53 51 45 53 51 45 53 51 45 53 51
1925 2070 2210 2330 1780 1870 1995 2120 1495 1570 1640 1730 1100 1140 1200 1250
300
A A A 1,0 4 A A
200
A 3 A
7
A A
0,5
12 11 6 16 15 14 13 9 5 10
A 2 A A
100
25
50
75
100
1 125
150
[CFM] [m3/h]
40
80
120
160
200
240
448
kg 1.0
kg 1.5
731 26 551 M4
M4
EC centrifugal, forward
115 max. 95
450+20
58 0,15
72 108 133
46
Brass lead tips
1050,2
171 59 4x90 71
Accessories
87
45
112-1
450 +20
92,5
449
Inlet nozzle p. 552 Electr. connection p. 601
Contacts
Technology
14
85
79
180
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 140
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 1790
W 70
A 1.00
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1,25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1790 1900 2040 2250 1410 1500 1600 1790 1060 1105 1210 1355 705 750 800 895
P1 [W] 70 63 53 36 33 30 25 18 14 13 11 8 4 4 3 3
I [A] 1.00 1.00 0.80 0.50 0.60 0.55 0.45 0.30 0.35 0.30 0.25 0.20 0.20 0.20 0.20 0.20
LpA [dB(A)] 63 61 60 58 58 56 54 53 51 50 47 47 40 39 38 37
tL [%] 46 61 55 46 56 48 46 56 48 46 56 48
300
A 4 A A
1,00
A 3 A A
200
0,75
8
A A
0,50
A
7
100
12
A A
0,25
11 16 15 14
6 10
13 100
5 200
100
200
300
400
500
450
kg 1.3
kg 2.6
26
851 721 M4
M4
EC centrifugal, forward
115 max. 95
450 +20
58 0,15
72 121 140
59
Brass lead tips
1050,2
6,6
130 115
120 105
92
94
118-1
max. 262,6
247
158
107 M4
1001
16
Contacts
85 450 +20
451
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Technology
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 140
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 1800
W 66
A 0.50
Pa 0
C -25 to +60
p. 601 H1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1,25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1800 1860 1970 2170 1410 1500 1600 1790 1060 1105 1210 1355 705 750 800 895
P1 [W] 66 58 49 33 33 30 25 18 14 13 11 8 4 4 3 3
I [A] 0.50 0.40 0.35 0.25 0.30 0.25 0.25 0.15 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10
LpA [dB(A)] 63 62 60 58 58 56 54 53 51 50 47 47 40 39 38 37
tL [%] 46 56 48 46 56 48 46 56 48 46 56 48
300
4 1,00
A A A A A
200
0,75
8
A A A
0,50
A
7
100
12
A A
0,25
11 16 15 14
6 10
13 100
5 200
100
200
300
400
500
452
kg 1.3
kg 2.6
26
851 721 M4
M4
EC centrifugal, forward
115 max. 95
450 +20
58 0,15
72 121 140
59
Brass lead tips
1050,2
6,6
130 115
120 105
92
94
118-1
max. 262,6
247
158
107 M4
1001
16
Contacts
85 450 +20
453
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 601
Technology
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Tach output Control input 0-10 VDC / PWM Locked-rotor protection Output 10 VDC max. 1.1 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 140
subject to alterations
VAC 1~ 115
Hz 50/60
rpm 1340
W 70
A 1.00
Pa 0
C -25 to +60
p. 602 H2)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 2390 2450 2460 1920 1960 2130 1300 1550 1760 440 880 1340
P1 [W] 29 55 67 17 30 55 9 22 40 3 9 25
I [A] 0.40 0.80 1.00 0.30 0.70 0.80 0.20 0.30 0.60 0.10 0.15 0.40
LpA [dB(A)] 59 60 60 54 55 60 46 51 58 33 45 55
tL [%] 37 50 57 38 54 55 36 48 48
400
1,5
A A A A
300
1,0
A A A A
200
100
0,5
10
11 100 150
12 200 250
50
[CFM]
100
200
300
400
454
kg 1.3
kg 2.6
26
851 721 M4
M4
EC centrifugal, forward
115 max. 95
450 +20
58 0,15
72 117 142
59
Brass lead tips
105 0,2
6,6
130 115
120 105
92
94
118-1
max. 262,6
247
158
107 M4
1001
16
Contacts
85 450 +20
455
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 602
Technology
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA Input for set value Lin 0-10 VDC / PWM Tach output Locked-rotor protection (1.7 V 50 m3/h, 10 V 300 m3/h) EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
AC centrifugal, backward
General information
Nominal data
Type *3G 140
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 1380
W 70
A 0.60
Pa 0
C -25 to +60
p. 602 H2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 2380 2495 2400 2030 2000 2110 1325 1460 1755 480 890 1380
P1 [W] 33 51 67 22 34 61 12 21 43 3 11 31
I [A] 0.25 0.45 0.55 0.20 0.30 0.50 0.10 0.20 0.35 0.05 0.10 0.25
LpA [dB(A)] 59 60 60 54 55 60 46 51 58 33 45 55
tL [%] 37 50 57 38 54 55 36 48 48
400
1,5
A A A A
300
1,0
A A A A
200
100
0,5
10
11 100 150
12 200 250
50
[CFM]
100
200
300
400
456
kg 1.3
kg 2.6
26
851 721 M4
M4
EC centrifugal, forward
115 max. 95
450 +20
58 0,15
72 117 142
59
Brass lead tips
105 0,2
6,6
130 115
120 105
92
94
118-1
max. 262,6
247
158
107 M4
1001
16
Contacts
85 450 +20
457
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 602
Technology
EC-SYSTEMS
85
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA Input for set value Lin 0-10 VDC / PWM Tach output Locked-rotor protection (1.7 V 50 m3/h, 10 V 300 m3/h) EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, CE Approvals: GOST; VDE, UL, CSA, CCC are applied for Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
AC centrifugal, backward
General information
Nominal data
Type *3G 146
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2430
W 170
A 2.20
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 4 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2430 2720 3040 3230 2120 2390 2700 2800 1770 1980 2230 2330 1250 1390 1520 1560
I [A] 2.10 2.10 2.00 1.50 1.40 1.40 1.40 1.00 0.90 0.90 0.90 0.70 0.40 0.40 0.40 0.30
LpA [dB(A)] 71 70 68 67 67 66 65 63 63 62 60 59 54 52 51 50
tL [%] 40 55 50 40 56 49 39 53 44 32 43 32
600
500
2,0
A 3
8
A A
400
1,5
7
A A
300
1,0
12 11
A A A
200
6
A A A
0,5
16
100
15
10
14 13 9
100
200
5 300
1 [CFM]
100
200
300
400
500
600
[m3/h]
458
kg 2.0
kg 3.5
92
5 9 8 1 0 25
max. 62,5
45 8 85 0
0 +2
45
6,3
Core-end sleeves
130 115
120 105
94 92
125,5 -1
1
M4
58
max. 262,6
1001 132,51,5
45 85 0 +2
0
459
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 603
Contacts
Technology
108
Accessories
EC-SYSTEMS
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 146
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2520
W 175
A 1.30
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 4 A 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4
n [rpm] 2520 2840 3030 3210 2430 2545 2655 2770 2080 2160 2240 2310 1540 1580 1610 1640
I [A] 1.30 1.20 1.10 0.80 1.30 1.10 0.80 0.60 0.80 0.70 0.60 0.40 0.40 0.30 0.25 0.20
LpA [dB(A)] 71 70 68 67 71 68 65 63 67 64 66 59 59 56 52 51
tL [%] 43 60 51 42 60 50 41 52 51 34 41 40
600
500
2,0
A 3
8
A A
400
1,5
7
A A
300
1,0
12 11
A A A A A
15 10
200
6 16
0,5
100
14
13
100
200
9 300
5 1 [CFM]
100
200
300
400
500
600
[m3/h]
460
kg 2.0
kg 3.5
92
5 9 8 1 0 25
max. 62,5
45 8 85 0
0 +2
45
6,3
Core-end sleeves
130 115
120 105
94 92
125,5 -1
1
M4
58
max. 262,6
1001 132,51,5
45 85 0 +2
0
461
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 603
Contacts
Technology
108
Accessories
EC-SYSTEMS
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 160
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 2100
W 170
A 2.20
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 4 A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2100 2230 2550 2640 1810 1930 2160 2230 1510 1600 1780 1830 1020 1080 1150 1170
I [A] 2.10 2.10 2.10 1.40 1.40 1.40 1.30 0.90 0.90 0.90 0.90 0.60 0.40 0.40 0.30 0.30
LpA [dB(A)] 69 68 69 67 64 64 65 62 60 60 60 58 51 50 50 47
tL [%] 41 58 49 38 55 43 36 49 39 29 37 25
600
500
400
1,5
8
2,0
3 A A
300
1,0
12
A
7
A A
200
11
A A
0,5
100
2
16 15 10 14 13 9 6
100
200
5 300
1 [CFM]
100
200
300
400
500
600
[m3/h]
462
kg 2.0
kg 3.5
92
5 9 8 1 0 25
45 8 85
Core-end sleeves
0 +2
max. 61,7
45
6,3
130 115
120 105
94 92
1
130-1 M4
75
max. 262,6
1001 132,51,5
45 85 0 +2
0
463
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 603
Contacts
Technology
108
Accessories
EC-SYSTEMS
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 160
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2150
W 175
A 1.30
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 2150 2320 2450 2540 2070 2090 2150 2205 1700 1730 1760 1795 1190 1200 1220 1240
I [A] 1.25 1.30 1.10 0.70 1.10 1.00 0.80 0.60 0.70 0.60 0.50 0.30 0.30 0.30 0.25 0.20
LpA [dB(A)] 70 70 68 67 69 67 65 63 63 62 59 58 54 53 51 48
tL [%] 39 41 46 40 56 45 37 49 37 29 35 27
600
500
2,0
A 4 A A
400
1,5
8
A 3 A A
7
300
1,0
12
A A
200
11
A A
0,5
100
16 15 10 14
2
6
100
13 200
9 300
5 1 [CFM]
100
200
300
400
500
600
[m3/h]
464
kg 2.0
kg 3.5
92
5 9 8 1 0 25
45 8 85
Core-end sleeves
0 +2
max. 61,7
45
6,3
130 115
120 105
94 92
1
130-1 M4
75
max. 262,6
1001 132,51,5
45 85 0 +2
0
465
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 603
Contacts
Technology
108
Accessories
EC-SYSTEMS
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 160
subject to alterations
VAC 1~ 230
Hz 50/60
rpm 1340
W 175
A 1.30
Pa 0
C -25 to +60
p. 604 J2)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Nominal voltage
Speed/rpm
Frequency
Curve
Curves
[Pa] A A A A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 2910 2930 2780 2380 2360 2450 1690 1760 2020 610 950 1340
I [A] 0.90 1.10 1.30 0.60 0.70 0.95 0.30 0.40 0.70 0.10 0.25 0.40
LpA [dB(A)] 68 69 71 63 65 67 57 60 63 40 51 58
tL [%] 44 52 63 47 58 62 49 56 50
800
3,0
A A A A
600
2,0
A A A A
400
200
1,0
10
11 150 200
12 250
50
100
[CFM]
100
200
300
400
466
kg 2.0
kg 3.5
92
5 9 8 1 0 25
45 8 85
Core-end sleeves
0 +2
max. 61,7
45
6,3
130 115
120 105
94 92
1
130-1 M4
75
max. 262,6
1001 132,51,5
45 85 0 +2
0
467
Inlet nozzle p. 552 Guard grille p. 554 Air filter p. 563 Electr. connection p. 604
Contacts
Technology
108
Accessories
EC-SYSTEMS
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: PFC (passive) Input for set value Lin 0-10 VDC / PWM Output 10 VDC max. 1.1 mA Tach output (1.7 V 50 m3/h, 10 V 300 m3/h) EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for Air intake: Constant air flow curves can only be attained with unobstructed air intake (s. p. 586)
AC centrifugal, backward
General information
Nominal data
Type *3G 180
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1320
W 175
A 2.20
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1,25 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 1320 1370 1460 1570 990 1030 1080 1130 770 790 810 840 560 560 580 590
I [A] 2.10 1.90 1.50 0.90 0.90 0.90 0.70 0.40 0.50 0.40 0.30 0.20 0.20 0.20 0.20 0.10
LpA [dB(A)] 67 65 61 59 59 57 54 51 52 50 46 42 44 40 36 33
tL [%] 57 69 59 54 64 57 49 55 40 38 41 24
300
A A 4 A A A
200
0,75
1,00
A A A
0,50
8 7
A A
100
0,25
12 11 16
A 2
6 15 14 13 9 5 10
100
200
300
400
200
400
600
800
1000
468
kg 2.0
kg 4.0
92
45
45 8 85
Core-end sleeves
+2
max. 92
179,5 129
285 123
6 6x
3,2
5
134
149-1
45 85 0 +2
0
136
469
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 603
Contacts
Technology
2 19
332
Accessories
EC-SYSTEMS
5 9 8 0 1 25
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 180
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1320
W 162
A 1.20
Pa 150
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
n [rpm] 1420 1445 1530 975 995 1025 1065 745 755 775 805 515 520 535 560
I [A] 1.90 1.50 1.00 1.00 0.90 0.70 0.45 0.50 0.45 0.35 0.25 0.25 0.20 0.20 0.15
LpA [dB(A)] 62 61 59 58 56 53 49 52 49 45 42 41 39 35 32
tL [%] 59 69 56 54 60 45 47 49 34 33 34 20
300
250
1,0
A A A
0,75
200
A A
150
0,5
A A
A
7
100
0,25
6 12 11 10 16 15 14 13 9
A A A
50
200
200
400
600
800
1000
470
kg 2.0
kg 4.0
92
45
45 8 85
Core-end sleeves
+2
max. 92
179,5 129
285 123
6 6x
3,2
5
134
149-1
45 85 0 +2
0
136
471
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 603
Contacts
Technology
2 19
332
Accessories
EC-SYSTEMS
5 9 8 0 1 25
EC centrifugal, forward
Depth of screw max. 8 mm (core removing hole prepared for self-tapping screw) Depth of screw max. 6 mm (core removing hole prepared for self-tapping screw) Depth of screw 8-10 mm M4
M4 M4
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
Nominal data
Type *3G 180
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1970
W 335
A 3.90
Pa 200
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] 2,5 [in H O] A A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1970 2100 2205 1700 1700 1700 1500 1500 1500
I [A] 3.90 3.15 2.35 2.45 1.65 1.10 1.70 1.15 0.75
LpA [dB(A)] 76 72 70 71 65 63 68 62 59
tL [%] 52 62 56 52 62 56 52 62 46
600
500
2,0
A A 3 A A A
400
1,5
300
1,0
12
8 7
A A
200
11
0,5
10
100
200
400
600
800
[CFM] [m3/h]
200
400
600
800
1000
1200
1400
472
kg 3.9
kg 6.0
4x90
149 180
102
85 8 0 60
+2 0
92
164 0,35
Core-end sleeves
195 129
285
Accessories
123
134
6x
60
3,2
149 -1
332
19
0
2
136
473
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 605
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
+2
47,7
1301 1171
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
85 8
Nominal data
Type *3G 180
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 2450
W 510
A 3.15
Pa 300
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 3,5 A 1 2 3 4 5 6 7 8 9 10 11 12
n [rpm] 2450 2570 2690 2000 2000 2000 2000 1400 1400 1400 1400
P1 [W] 510 361 223 395 295 185 100 135 100 65 35
I [A] 3.15 2.25 1.45 2.50 1.90 1.20 0.60 0.90 0.60 0.40 0.20
LpA [dB(A)] 79 75 73 77 73 68 64 67 64 59 55
tL [%] 47 58 45 47 58 45 47 58 45
800
3,0 4 2,5
A A A
600
A A
2,0
A A
1,5
400
2 1,0
200
0,5
12
11 10
250
500
5 750
[CFM]
200
400
600
800
1000
1200
1400
[m3/h]
474
kg 4.7
kg 6.8
4x90
149 180
102
85 8 0 60
+2 0
92
164 0,35
Core-end sleeves
195 129
285
Accessories
123
134
6x
60
3,2
149 -1
332
19
0
2
136
475
Inlet nozzle p. 552 Guard grille p. 554 Electr. connection p. 605
Contacts
Technology
EC-SYSTEMS
EC centrifugal, forward
+2
47,7
1451 1171
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
85 8
Nominal data
Type *3G 200
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1720
W 350
A 4.20
Pa 150
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4
LpA [dB(A)] 73 71 69
tL [%] 49 58 50
600
500
2,0
2,4
400
1,6
300
200
0,8
1,2
100
0,4
250
500
750
[CFM]
200
400
600
800
1000
1200
1400
[m3/h]
476
kg 5.2
kg 7.4
4x90
102
176 202
85 8 0 60
+2
102
164 0,35
Core-end sleeves
146
6x
175 -1
60
3,2
371
21
0
3
152
477
Inlet nozzle p. 552 Electr. connection p. 605
Contacts
Technology
Accessories
208 142,5
318 136
EC-SYSTEMS
EC centrifugal, forward
47,7
1451 1341
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
+2
85 8
Nominal data
Type *3G 200
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1890
W 510
A 3.10
Pa 150
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 490 403 322 510 420 320 220 240 200 145 103 87 72 55 38
I [A] 3.00 2.40 2.00 3.10 2.50 1.90 1.30 1.50 1.20 0.90 0.70 0.60 0.50 0.40 0.30
LpA [dB(A)] 76 74 73 77 75 71 69 71 68 65 63 63 60 57 53
tL [%] 46 57 58 46 57 58 46 57 58 46 57 58
1890 1960 2050 1800 1800 1800 1800 1400 1400 1400 1400 1000 1000 1000 1000
600
2,4
500
2,0
4 A A A
400
1,6
A A
300
1,2
A A
12
A
11
200
0,8
A 2
6
A A
100
0,4
16 15 14 13 9 5 10
250
500
750
[CFM]
200
400
600
800
1000
1200
1400
[m3/h]
478
kg 5.2
kg 7.4
4x90
102
176 202
85 8 0 60
+2
102
164 0,35
Core-end sleeves
146
6x
175 -1
60
3,2
371
21
0
3
152
479
Inlet nozzle p. 552 Electr. connection p. 605
Contacts
Technology
Accessories
208 142,5
318 136
EC-SYSTEMS
EC centrifugal, forward
47,7
1451 1341
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
+2
85 8
Nominal data
Type *3G 225
subject to alterations
VAC 1~ 100-130
Hz 50/60
rpm 1500
W 350
A 4.30
Pa 150
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 115 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4
LpA [dB(A)] 72 69 68
tL [%] 48 60 56
600
500
2,0
2,4
400
1,6
300
200
0,8
1,2
100
0,4
250
500
750
[CFM]
200
400
600
800
1000
1200
1400
[m3/h]
480
kg 5.3
kg 7.5
4x90
102
195 225
85 8 0 60
0 +2
102
Core-end sleeves
146
0 x6
371
24
2
152
481
Inlet nozzle p. 552 Electr. connection p. 605
Contacts
Technology
194 -1
Accessories
208 142,5
EC-SYSTEMS
EC centrifugal, forward
47,7
145 1 134 1
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
0 +2
85 8
Nominal data
Type *3G 225
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1815
W 545
A 3.50
Pa 300
C -25 to +60
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A 4 A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [W] 545 456 363 592 381 278 191 312 200 146 101 142 91 67 46
I [A] 3.50 2.90 2.35 3.85 2.45 1.80 1.25 2.05 1.30 0.95 0.65 0.95 0.60 0.45 0.30
LpA [dB(A)] 75 74 73 76 71 69 66 72 66 63 61 65 59 56 54
tL [%] 53 60 59 53 60 59 53 60 59 53 60 59
1815 1900 1995 1610 1610 1610 1610 1300 1300 1300 1300 1000 1000 1000 1000
600
500
2,0
2,4
A A A
400
1,6
A
7
A 2 A A
6
300
1,2
12 11
A A
200
0,8
16
15
10
A A
100
0,4
14
250
500
13 750
1000
5 [CFM]
400
800
1200
1600
[m3/h]
482
kg 5.3
kg 7.5
4x90
102
195 225
85 8 0 60
0 +2
102
Core-end sleeves
146
0 x6
371
24
2
152
483
Inlet nozzle p. 552 Electr. connection p. 605
Contacts
Technology
194 -1
Accessories
208 142,5
EC-SYSTEMS
EC centrifugal, forward
47,7
145 1 134 1
45
M6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, CCC, GOST are applied for
AC centrifugal, backward
General information
0 60
0 +2
85 8
EC centrifugal fan
single inlet, 250
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 Insulation class: "B" Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1230
W 450
A 2.90
Pa 180
C -25 to +45
p. 605 K1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A 4 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1230 1370 1460 1160 1270 1320 900 960 990 600 630 640
I [A] 2.90 2.20 1.70 2.30 1.70 1.30 1.10 0.80 0.60 0.40 0.30 0.20
LpA [dB(A)] 72 70 68 71 67 66 64 60 58 53 48 46
tL [%] 50 60 56 50 60 56 50 60 56 50 60 56
400
350
1,4
A 3 8 A A 7 A A A
300
250
200
0,8
1,0
1,2
A 12 2 11 6 A A A
150
0,4
100
0,6
10 16 15 14
A A
0,2
50
250
500
750
1000
1250
[CFM] [m3/h]
400
800
1200
1600
2000
484
kg 5.6
Inlet nozzle
Flange
25010-2-4013
10011-2-4017
47,7 6,5
4x90
240
193 300
M6
4 18 1631
Housing width
600+20
View Z
8 2
287
203
30
247
230
30
65
138
18
147
213
30
198
30 30
158
184
30
485
Inlet nozzle p. 552 Electr. connection p. 605
Contacts
Technology
30
Accessories
25
6x60
85
EC-SYSTEMS
267
30
EC centrifugal, forward
30
170
50-2
1640,35
45
6x6
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Alarm relay Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 61800-5-1, CE Approvals: UL, CSA, GOST; CCC is applied for
AC centrifugal, backward
General information
EC centrifugal fan
single inlet, 250
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 250
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1320
kW 0.76
A 3.30
Pa 0
C -25 to +60
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[in H O] [Pa] A A A 4 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1320 1380 1410 1450 1190 1220 1250 1280 910 930 940 950 610 610 620 630
P1 [kW] 0.76 0.61 0.51 0.39 0.55 0.43 0.36 0.28 0.25 0.20 0.16 0.13 0.09 0.07 0.06 0.05
I [A] 3.30 2.70 2.30 1.70 2.40 1.90 1.60 1.20 1.10 0.90 0.70 0.60 0.40 0.40 0.30 0.30
LpA [dB(A)] 81 78 76 73 78 75 73 69 71 67 65 61 59 55 53 49
tL [%] 46 50 53 46 50 53 46 50 53 46 50 53
350
1,4
300
1,2
A A 8 3 A A A
250
0,8
1,0
200
A A 2
150
0,6
12 6 11
A A A A
100
0,4
10 16
50
0,2
250
500
400
800
1200
1600
2000
2400
[m3/h]
486
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 610800-5-1) Product conforming to standard: CE Approvals: UL, CSA, GOST, CCC are applied for
kg 7.6
Inlet nozzle
Flange
25010-2-4013
10025-2-4017
56,50,6
M6
5x
193 300
240
6x
60
72
4 221
Cable gland
Z 1680,5 1860,5
85
1
1631
Housing width
2851 300
View Z
287
203
30
247
230
30
65
138
18
147
213
30
198
30 30
158
184
30
487
Inlet nozzle p. 552 Electr. connection p. 607
Contacts
Technology
30
Accessories
25
6x60
EC-SYSTEMS
EC centrifugal, forward
267
30
50-2
24
EC centrifugal, backward
30
170
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
single inlet, 280
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1130
kW 0.75
A 3.30
Pa 0
C -25 to +50
p. 607 L1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [kW] 0.75 0.60 0.53 0.32 0.56 0.44 0.37 0.23 0.25 0.20 0.17 0.11 0.09 0.08 0.07 0.05
I [A] 3.30 2.70 2.30 1.40 2.50 2.00 1.60 1.00 1.10 0.90 0.80 0.50 0.40 0.40 0.30 0.30
LpA [dB(A)] 78 75 73 69 76 72 70 65 69 65 63 58 58 54 51 46
tL [%] 53 54 51 53 54 51 53 54 51 53 54 51
1130 1170 1210 1250 1020 1050 1070 1110 780 790 800 820 520 530 530 550
500
2,0
A A 4 A A A 8 A A 3 A A 7
400
300
200
0,8
1,2
1,6
100
0,4 0
500
400
800
1200
1600
2000
2400
[m3/h]
488
Technical features: Slave output 0-10 V max. 3 mA PFC (active) Output 20 VDC (20 %) max. 50 mA Integrated PID controller Output 10 VDC (+10 %) max. 10 mA Control input 0-10 VDC / PWM RS485 ebmBUS Input for sensor 0-10 V or 4-20 mA Alarm relay EMC: Interference emission acc. to EN 61000-6-4 (industrial environment) Interference immunity acc. to EN 61000-6-2 (industrial environment) Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 610800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST, CCC are applied for
kg 9.4
Inlet nozzle
Flange
28010-2-4013
10026-2-4017
56,50,6
M6
5x
296
228 336
280
6x
60
72
5 221
Cable gland
Z 1680,5 1860,5
15
1
1831
Housing width
3151 336
View Z
266
205
30
236
218
30
65
162
30
13
152
200
30
183
30 30
148
172
30
489
Inlet nozzle p. 552 Electr. connection p. 607
Contacts
Technology
Accessories
25
6x60
EC-SYSTEMS
EC centrifugal, forward
254
30
57-2
24
EC centrifugal, backward
30
161
AC centrifugal, forward
AC centrifugal, backward
Line undervoltage detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
single inlet, 280
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 280
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1300
kW 1.10
A 2.00
Pa 0
C -25 to +50
p. 607 L2)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2,8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1300 1370 1420 1540 1200 1260 1310 1400 970 990 1010 1050 660 680 680 710
P1 [kW] 1.10 0.94 0.81 0.53 0.87 0.73 0.62 0.40 0.46 0.36 0.30 0.19 0.16 0.13 0.11 0.08
I [A] 2.00 1.80 1.50 1.00 1.60 1.40 1.20 0.80 0.90 0.80 0.60 0.50 0.40 0.30 0.30 0.20
LpA [dB(A)] 82 79 77 73 79 76 75 71 74 70 68 63 64 60 58 53
tL [%] 55 59 57 55 59 57 55 59 57 55 59 57
800
700
A 4 A A A 8
600
500
2,0
2,4
A A
400
1,6
3 7
A A
1,2
300
12 2
A A A A
200
0,8
11 16 10 15 14 13 1000 9
100
0,4
5 1500
1 [CFM]
500
400
800
1200
1600
2000
2400
2800
3200
[m3/h]
490
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 610800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST, CCC are applied for
kg 9.4
Inlet nozzle
Flange
28010-2-4013
10026-2-4017
56,50,6
M6
5x
296
228 336
280
6x
60
72
5 221
Cable gland
Z 1680,5 1860,5
15
1
1831
Housing width
3151 336
View Z
266
205
30
236
218
30
65
162
30
13
152
200
30
183
30 30
148
172
30
491
Inlet nozzle p. 552 Electr. connection p. 607
Contacts
Technology
Accessories
25
6x60
EC-SYSTEMS
EC centrifugal, forward
254
30
57-2
24
EC centrifugal, backward
30
161
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
single inlet, 310
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 310
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1500
kW 2.97
A 4.60
Pa 200
C -25 to +45
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A 4
2
n [rpm]
A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [kW] 2.97 2.34 1.37 2.19 1.71 0.96 1.12 0.82 0.47 0.37 0.27 0.16
I [A] 4.60 3.70 2.10 3.30 2.60 1.60 1.80 1.40 1.00 0.90 0.70 0.50
LpA [dB(A)] 88 85 82 85 82 79 80 76 72 69 65 60
tL [%] 47 57 56 47 57 56 47 57 56 47 57 56
1500 1600 1730 1350 1440 1540 1080 1120 1170 730 750 780
A 8 2,8 A A 2,4
600
A A
2,0
7 12
A A
1,6
A A
1,2
11
A A 2
0,8
16 15 10 14
100
0,4
500
1000
1500
2000
2500
3000
[CFM] [m3/h]
1000
2000
3000
4000
5000
492
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 19.4
Inlet nozzle
Flange
31010-2-4013
10050-2-4017
70
315
327
257 374
Z 4 421
Cable gland
2031
Housing width
235-2 2520,3
1
3501 374
Accessories
249
65
176
3 50
6x60
View Z
349
30
303
283
30
30
18
186
264
30
246
30 30
200
229
30
493
Inlet nozzle p. 552 Electr. connection p. 608
Contacts
Technology
EC-SYSTEMS
325
25
EC centrifugal, forward
61-2 M10
8x
22.5
6x
60
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
45
30
30
214
EC centrifugal fan
single inlet, 355
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 355
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1180
kW 2.60
A 4.00
Pa 300
C -25 to +35
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 3,2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 1180 1280 1350 1050 1130 1190 840 890 920 580 600 610
P1 [kW] 2.60 1.95 1.52 1.91 1.36 1.02 0.97 0.66 0.49 0.31 0.22 0.17
I [A] 4.00 3.00 2.30 2.90 2.00 1.60 1.70 1.30 1.00 0.70 0.60 0.50
LpA [dB(A)] 84 80 79 82 77 75 76 71 68 65 59 56
tL [%] 54 64 64 54 64 64 54 64 64 54 64 64
4 A A 3 A A A
2,8
600 500
2,4
2,0
A A
1,6
A 12 A
1,2
11 6
2 A A A
0,8
16
15 14
10
100
0,4 0
500
1000
1500
2000
2500
3000
3500
[CFM] [m3/h]
1000
2000
3000
4000
5000
6000
494
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 19.9
Inlet nozzle
Flange
35510-2-4013
10051-2-4017
70
355
372
289 413
Z 5 421
Cable gland
2281
Housing width
235-2 2520,3
1
3901 413
Accessories
280
65
196
3 90
6x60
View Z
389
30
338
315
30
30
18
207
294
30
274
30 30
222
256
30
495
Inlet nozzle p. 552 Electr. connection p. 608
Contacts
Technology
EC-SYSTEMS
362
25
EC centrifugal, forward
70-2 M10
8x
22.5
6x
60
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
45
30
30
238
EC centrifugal fan
single inlet, 400
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 400
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 930
kW 2.13
A 3.30
Pa 200
C -25 to +45
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A A 4 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [kW] 2.13 1.68 0.93 1.49 1.01 0.46 0.91 0.62 0.28 0.44 0.30 0.14
I [A] 3.30 2.60 1.60 2.40 1.60 0.80 1.40 1.00 0.50 0.70 0.50 0.20
LpA [dB(A)] 83 80 74 80 75 67 76 71 63 69 65 56
tL [%] 54 63 61 54 63 61 54 63 61 54 63 61
930 980 1040 830 830 830 700 700 700 550 550 550
600
500
2,0
2,4
A A A
1,6
400
3 A 8 A A 7 12 11 16 15 10 14 6 A A
300
200
0,8
1,2
A A A
100
0,4 0
500
1000
1500
2000
2500
3000
3500
4000
[CFM] [m3/h]
1000
2000
3000
4000
5000
6000
7000
496
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 25.5
Inlet nozzle
Flange
40010-2-4013
10052-2-4017
70
400
414
325 456
Z 4 421
Cable gland
2551
Housing width
235-2 2520,3
1
4301 456
Accessories
316
65
220
4 30
6x60
View Z
437
30
380
355
30
30
20
233
331
30
308
30 30
250
288
30
497
Inlet nozzle p. 552 Electr. connection p. 608
Contacts
Technology
EC-SYSTEMS
408
25
EC centrifugal, forward
78-2 M10
6x6
8
9
8x 45
EC centrifugal, backward
30
AC centrifugal, forward
30
268
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
single inlet, 400
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 400
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 1120
kW 3.080
A 4.60
Pa 300
C -25 to +55
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A
2
n [rpm]
A A 4 A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
P1 [kW] 3.08 2.60 1.53 2.16 1.81 1.02 1.05 0.87 0.51 0.35 0.31 0.19
I [A] 4.60 3.90 2.30 3.20 2.70 1.70 1.70 1.50 1.10 0.80 0.70 0.50
LpA [dB(A)] 87 85 79 84 82 75 78 75 68 67 64 57
tL [%] 49 57 58 49 57 58 49 57 58 49 57 58
1120 1160 1220 1000 1020 1060 780 790 820 520 530 550
800
2,8
700
A A
600
2,4
8 3
A A
500
2,0
A A
400
1,6
7 12
A A 2 A A A
300
1,2
11
200
0,8
16
10 15 14
100
0,4
1000
2000
3000
4000
[CFM]
1000
2000
3000
4000
5000
6000
7000
8000
[m3/h]
498
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 30.0
Inlet nozzle
Flange
40010-2-4013
10052-2-4017
70
400
414
325 456
Z 4 421
Cable gland
2551
Housing width
235-2 2520,3
1
4301 456
Accessories
316
65
220
4 30
6x60
View Z
437
30
380
355
30
30
20
233
331
30
308
30 30
250
288
30
499
Inlet nozzle p. 552 Electr. connection p. 608
Contacts
Technology
EC-SYSTEMS
408
25
EC centrifugal, forward
78-2 M10
6x6
8
9
8x 45
EC centrifugal, backward
30
AC centrifugal, forward
30
268
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal fan
single inlet, 450
Material: Impeller: Galvanised sheet steel Rotor: Coated in black Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 54 (acc. to EN 60529) Insulation class: "F" Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharges: Rotor-side Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type R3G 450
subject to alterations
VAC 3~ 380-480
Hz 50/60
rpm 890
kW 2.65
A 4.50
Pa 300
C -25 to +50
p. 608 M)
(1) Nominal data in operating point with maximum load and 400 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
2
n [rpm] 890 920 970 790 810 840 610 620 630 410 420 420
P1 [kW] 2.65 2.26 1.80 1.82 1.58 1.17 0.83 0.73 0.54 0.27 0.23 0.18
I [A] 4.50 3.50 2.80 3.20 2.80 2.20 1.60 1.50 1.10 0.70 0.60 0.50
LpA [dB(A)] 82 80 76 79 76 74 71 68 66 60 57 54
tL [%] 60 66 70 60 66 70 60 66 70 60 66 70
800
700
2,8
A 4 A A A
600
500
2,0
2,4
8 1,6
A 3 A A 7 A 2 A A A 10 A
400
300
1,2
12 6 0,8 11
200
100
0,4
16 15 14
1000
2000
3000
4000
5000
[CFM] [m3/h]
2000
4000
6000
8000
500
Technical features: PFC (passive) Integrated PID controller Control input 0-10 VDC / PWM Input for sensor 0-10 V or 4-20 mA EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 61800-5-1 Connection leads: Via terminal strip Protection class: I (acc. to EN 61800-5-1) Product conforming to standard: CE Approvals: VDE, UL, CSA, GOST
kg 31.5
Inlet nozzle
Flange
45010-2-4013
10053-2-4017
70
450
459
365 530
Z 5 421
Cable gland
2881
Housing width
235-2 2520,3
1
5101 530
Accessories
355
65
247
5 10
6x60
View Z
491
30
427
398
30
30
22
262
371
30
346
30 30
281
323
30
501
Inlet nozzle p. 552 Electr. connection p. 608
Contacts
Technology
EC-SYSTEMS
458
25
EC centrifugal, forward
301
90-2 M10
8x 45
9
6x60
23
EC centrifugal, backward
30
AC centrifugal, forward
30
AC centrifugal, backward
Slave output 0-10 V max. 3 mA Output 20 VDC (20 %) max. 50 mA Output 10 VDC (+10 %) max. 10 mA RS485 ebmBUS Alarm relay
Line undervoltage / phase failure detection Motor current limitation Electronics / motor overtemperature protection Locked-rotor protection Soft start
General information
EC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Coated in black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D1G 133 D1G 133
subject to alterations
VDC 24 48
W 105 105
A 5.60 2.80
dB(A) 62 62
Pa 50 50
p. 600 G) G)
Electr. connection
LpA [dB(A)] 63 62 62 62 61 59 60 59 57 56 56 tL [%] 49 41 37 49 41 37 49 41 37
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 2050 2490 2820 1780 1900 2310 2630 1500 1720 2020 2230
600
500
2,0
A A A
400
1,5 4'
A A
UN
UR
4
A A A
300
1,0
3'
200
3 7
0,5
2' 2 6
100
100
200
300
5 400
1 [CFM]
200
400
600
800
[m3/h]
502
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA; A (48 VDC) with CCC
Centrifugal blower without flange D1G 133-AB29 -52 D1G 133-AB39 -52
kg 3.3 3.3
170,5 215 87
EC centrifugal, forward 503
Guard grille p. 555 Electr. connection p. 600
112
180
65,5
71
85 6
300 +20
Brass lead tips
190
Accessories Contacts Technology
14
EC-SYSTEMS
79
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 133
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Coated in black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D1G 133 D1G 133
subject to alterations
VDC 24 48
W 118 118
A 6.00 3.00
dB(A) 64 64
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 65 62 59 61 64 61 57 58 60 56 53 53 tL [%] 38 41 32 38 41 32 38 41 32
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 1700 1930 2290 2700 1580 1790 2100 2410 1400 1580 1760 2000
500
2,0
A A A
400
1,5
UN
4'
UR
A A
300
1,0
A A 3' A
200
0,5
7 2' 2 6
100
5 0 200 400
1 600
200
400
600
800
1000
504
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA
Centrifugal blower without flange D1G 133-DC13 -52 D1G 133-DC17 -52
kg 3.4 3.4
max. 214
112
67,5
104
85 6
300 +20
Brass lead tips
190
Accessories Contacts Technology
14
EC-SYSTEMS
93,5
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 146
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Coated in black Direction of rotation: Clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D1G 146 D1G 146
subject to alterations
VDC 24 48
W 105 105
A 5.10 2.60
dB(A) 61 61
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 63 60 58 59 61 58 56 57 56 54 52 51 tL [%] 53 61 55 53 61 55 53 61 55
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A A 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 1460 1680 1890 2240 1350 1570 1750 2010 1210 1360 1460 1670
400
1,5 A A
300
1,0 4
4'
UR
A A A A
200
8
UN
3
A 3' A
0,5
7 2 6
2'
100
5 0 200 400
1' 1 600
[CFM] [m3/h]
200
400
600
800
1000
506
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA
Centrifugal blower without flange D1G 146-AA19 -52 D1G 146-AA33 -52
kg 3.5 3.5
117-0,5
219
69
85 6
350 +20
Brass lead tips
180
Accessories Contacts Technology
14
EC-SYSTEMS
98
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 160
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Coated in black Direction of rotation: Counter-clockwise, seen on rotor Type of protection: IP 42 Insulation class: "B" Mounting position: Any Condensate discharges: None Mode of operation: Continuous operation (S1) Design: Standard external-rotor motor anti-vibration mounted on both sides Bearings: Maintenance-free ball bearings
Nominal data
Type D1G 160 D1G 160
subject to alterations
VDC 24 48
W 112 112
A 5.60 2.90
dB(A) 60 60
Pa 0 0
p. 600 G) G)
Electr. connection
LpA [dB(A)] 63 61 59 60 60 59 58 58 58 56 54 53 tL [%] 64 66 60 64 66 60 64 66 60
Nominal voltage
Voltage range
Current draw
Power input
Speed/rpm
Air flow
Curve
Curves
[Pa] [in H O] A A A A 2,0 1 2 3 4 1 2 3 4 5 6 7 8
n [rpm] 1330 1520 1790 2090 1250 1420 1660 1900 1100 1250 1420 1580
500
A A A
400
1,5 4'
A A
UN
UR
4
A A A
300
1,0
3'
200
7 0,5 2' 6 2
100
5 0 200 400
1 600
200
400
600
800
1000
508
Technical features: Tach output Control input 0-10 VDC / PWM Reverse polarity and locked-rotor protection EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-2 Cable exit: Variable Protection class: I Product conforming to standard: EN 60950-1 Approvals: UL, CSA
Centrifugal blower without flange D1G 160-DA19 -52 D1G 160-DA33 -52
kg 3.6 3.6
87
130 0,5
max. 242
85 6
400 +20
Accessories 509
Guard grille p. 555 Electr. connection p. 600
100,5
17
Contacts
Technology
EC-SYSTEMS
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 146
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Galvanised Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal; rotor on top or rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type D3G 146
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1740
W 171
A 1.30
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1740 1960 2150 2410 1460 1650 1820 2020 1090 1220 1330 1480
I [A] 1.30 1.20 1.20 1.20 0.70 0.80 0.80 0.70 0.40 0.40 0.40 0.40
LpA [dB(A)] 67 65 65 66 62 60 60 61 55 56 52 53
tL [%] 49 56 55 46 53 52 41 47 44
400
1,5 A A 4 A A A 1,0
8
300
A A
200
7
2 0,5
12 6 11 10
100
100
200
300
9 400
500
600
1 [CFM] [m3/h]
200
400
600
800
1000
510
kg 4.0
5 5 350+20 117-0,5
219
Core-end sleeves
511
Guard grille p. 555 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
98
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 160
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Galvanised Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal; rotor on top or rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type D3G 160
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1390
W 154
A 1.20
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 1,0 A A 4 A A 0,75 A 3 A A A 2 3 4 5 6 7 8 9 10 11 12 1
2
n [rpm] 1390 1440 1540 1590 1180 1220 1270 1310 860 890 910 930
I [A] 1.20 1.00 0.70 0.50 0.70 0.60 0.40 0.30 0.30 0.30 0.20 0.20
LpA [dB(A)] 64 61 57 56 59 56 52 51 51 47 43 42
tL [%] 53 60 47 52 57 44 45 45 31
240
200
160
8
120
0,5
80
12
2
11 6
40
10
0,25
100
200
300
400
500
5 600
1 [CFM] [m3/h]
200
400
600
800
1000
512
kg 4.9
241
1300,5
450+20
Core-end sleeves
513
Guard grille p. 555 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
100,5
EC centrifugal, forward
max. 107
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
EC centrifugal blowers
dual inlet, 180
Material: Housing: Galvanised sheet steel Impeller: Galvanised sheet steel Rotor: Galvanised Electronics enclosure: Die-cast aluminium Direction of rotation: Clockwise, seen on rotor Type of protection: IP 44 Insulation class: "B" Mounting position: Shaft horizontal; rotor on top or rotor on bottom on request Condensate discharges: None Mode of operation: Continuous operation (S1) Bearings: Maintenance-free ball bearings
Nominal data
Type D3G 180
subject to alterations
VAC 1~ 200-277
Hz 50/60
rpm 1090
W 165
A 1.22
Pa 0
C -25 to +60
p. 603 J1)
(1) Nominal data in operating point with maximum load and 230 VAC
Electr. connection
Speed/rpm
Frequency
Curve
Curves
[Pa] [in H O] A A A A 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1
2
n [rpm] 1090 1200 1310 1400 925 1015 1090 1145 690 760 805 840 455 500 525 545
I [A] 1.22 1.15 0.85 0.55 0.75 0.70 0.50 0.35 0.35 0.30 0.25 0.20 0.15 0.15 0.10 0.10
LpA [dB(A)] 64 62 59 56 60 58 54 51 52 50 46 43 40 38 34 32
tL [%] 54 62 53 51 61 48 47 51 39 36 35 23
250
1,00
A A 4 A A
200
0,75
A 3 A A
8
150
0,50
A A
7
100
12
A A 0,25 2
11 6 16 15 14 13 9 5 10
A A
50
250
500
750
1 [CFM]
400
800
1200
1600
[m3/h]
514
kg 7.0
296 133
188 168
6x
60
134
90
289
92
136
149
3,2
600
Core-end sleeves
255
515
Guard grille p. 555 Electr. connection p. 603
Contacts
Technology
Accessories
EC-SYSTEMS
333
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
Technical features: Output 10 VDC max. 1.1 mA PFC (passive) Tach output Control input 0-10 VDC / PWM Over-temperature protected electronics / motor EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Harmonics acc. to DIN EN 61000-3-2/3 Leakage current: < 3.5 mA acc. to EN 60950-1 Cable exit: Variable Protection class: I Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE Approvals: UL, CSA; CCC, GOST are applied for
AC centrifugal, backward
General information
516
EC-SYSTEMS
Options Switch power supplies External commutation electronics for rail technology Accessories: Temperature sensor / control module, pressure control, selection module, interface converter, ... HMS controller 518 522 526 528 546
517
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
EC-SYSTEMS
Options
EC fan PWM and Lin 0-10 VDC
red
EC fans 24 / 48 VDC with integrated commutation electronics Linear input: < 1 VDC 1 VDC 10 VDC
24 / 48 VDC
blue
Control input
Lin PWM
0-10 VDC
yellow
white
Tach output
PWM input: < 10% PWM -> n=0 10% PWM -> nmin 100% PWM -> nmax
EC fans 48 VDC with integrated commutation electronics Linear input: < 1 VDC 1 VDC 10 VDC
red
230 VAC, 50 / 60 Hz
blue yellow
Selector switch
3 speed steps
PWM input: < 10% PWM -> n=0 10% PWM -> nmin 100% PWM -> nmax
RS485 / ebmBUS
EC fan
EC fans with external commutation electronics 650 W, 110 VDC (rail technology)
110 VDC
Control input
Lin
0-10 VDC
Potentiometer for set values Tach output Alarm Controller enabling 10-100 VDC 10-253 VAC
518
Mains operation, 50 / 60 Hz
EC fans (motor size 084) with integrated commutation electronics 1~ 100 -130 VAC or 200 -277 VAC 50/60 Hz mains operation
Mains operation, 50 / 60 Hz
Control input 0-10 VDC / PWM Actual value input 0-10 VDC Supply for potentiometer 10 V Alarm Slave output
519
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
EC fans (motor size 074) with integrated commutation electronics 1~ 100 -130 VAC or 200 -277 VAC 50/60 Hz mains operation
AC centrifugal, backward
EC fans (motor size 055) with integrated commutation electronics 1~ 115 VAC or 230 VAC 50/60 Hz mains operation
General information
EC-SYSTEMS
Options
EC fan with integrated electronics
EC fans (motor size 084, ebmBUS) with integrated commutation electronics 1~ 200-277 VAC, 50/60 Hz mains operation
Mains operation, 50 / 60 Hz
EC fans (motor size 112/150) with integrated commutation electronics 1~ 200-277 VAC or 3~ 200-240 / 380-480 VAC 50/60 Hz mains operation
Mains operation, 50 / 60 Hz
Control input 0-10 VDC / PWM Actual value input 0-10 VDC Actual value input 4-20 mA Supply for external sensor 20 V Supply for potentiometer 10 V Alarm Slave output
520
Control software part no. 25711-2-0199 integrated electronics Interface converter part no. 21487-1-0174
Features of control software LISA 5.1 Individual control and monitoring of max. 7,905 fans Group-oriented arrangement of the fans Level 1: Overview display for 10 floors Level 2: Overview display for 255 groups Level 3: Overview display for 31 fans within a group Broadcast command for a group or all fans Speed, temperature or pressure control Alarm signal
integrated electronics
521
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
Electronics
EC fan
General information
Nominal voltage
Output voltage
Frequency
Output P1 max.
Nominal data
Type CNW015-AB06 -01 CNW015-AB02 -01 CNW030-AC06 -01 CNW030-AC02 -01
subject to alterations
Mass
Dimensions
a 187 187 272 272 b 176 176 260 260 c 167 167 251 251 d 50 50 66 66 e 110 110 112 112 f 1 1 2 2
VDC 48 48 48 48
EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Product conforming to standards: EN 50178, CE Approvals: UL/CSA (File No. E 181381)
e 5
f 108
522
10
80
c b
Line side
523 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Nominal voltage
Output voltage
Frequency
Output P1 max.
Nominal data
Type CNW015-AB06 -05 CNW015-AB02 -05 CNW030-AC06 -05 CNW030-AC02 -05
subject to alterations
Mass
Dimensions
a 187 187 272 272 b 176 176 260 260 c 167 167 251 251 d 50 50 66 66 e 110 110 112 112 f 1 1 2 2
VDC 48 48 48 48
e 5
EMC: Interference emission acc. to EN 61000-6-3 Interference immunity acc. to EN 61000-6-1 Product conforming to standards: EN 50178, CE Approvals: UL/CSA (File No. E 181381) Technical features: Control board for RS485, ebmBUS and LISA functions
f 108
524
10
80
c b
Line side
RS232
white
Tach PWM
yellow
RS485 RS485
Blower
525 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Nominal voltage
Current draw
Nominal data
Type CEG 485-HB50 -01
subject to alterations
VDC 110
W 650
kg
169
190
179,5
146,5
EMC / EMI: Acc. to EN 50155 and EN 50121 Legislation: Low voltage directive 73/23/EEC, VDE 0160/EN 50178 Design: motor output protected against short circuit phase to phase and conditionally phase to earth 0-10 V input (Ri: 100 k) 0-10 V input (Ri: 100 k) for connection of external actual value input RS485 interface (ebmBUS) Floating alarm contact 250 VAC / 5A, during alarm, relay is released (low-active) Wide voltage input for external controller enabling via RESET function Tach output LED for operation and alarm mode green: unit on red: alarm Setting of minimum and maximum values via potentiometer Operational modes (to be set via DIP switch): Open loop speed control Closed loop speed control Controlling external parameters Direction of motor rotation reversible Connectors for external electronics: KL1 2-pole connector; centreline 7.5; Co. Wago part no.: 231-202/026-000 KL2A 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000 KL2B 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000 KL3A 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000 KL3B 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000 KL4 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000 KL5A 5-pole connector; centreline 5; Co. Wago part no.: 231-105/026-000 KL5B 5-pole connector; centreline 5; Co. Wago part no.: 231-105/026-000 KL6 3-pole connector; centreline 7.5; Co. Wago part no.: 731-603
5,5
63
1,5
2,2
526
1,5
40
63
193
64
68
Mass
PE1
+18 V
Sensor
KL2B
1 GND +10 V 0-10 V GND
KL3B NC
COM
PE2
+ KL1
Tacho
GND
NO
COM
H1
V KL6
KL2A
KL3A
KL4
527
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
RS A
RS B
RS A
RS B
An
AC centrifugal, forward
AC centrifugal, backward
General information
Temperature sensor
Output impedance
Nominal voltage
Output voltage
Output current
Current draw
Nominal data
Part no. 50005-1-0174
subject to alterations
VDC 15-30
mA 10
VDC 0-10
mA 1.0
k 1.1
kg 0.02
3,3
3,5
Electr. connection:
red 15-30 VDC
Mass
yellow 0-10 VDC output
38,5
6,9
Output +
Core-end sleeve
450 +20
blue
Temperature sensor
0 -20 80 Temp. C
Tolerance 3 K
528
Output impedance
Nominal data
Part no. 50002-1-0174 50003-1-0174
subject to alterations
mA 10 10
mA 0.1 0.1
k 6.8 6.8
kg
3,3
3,5
Electr. connection:
red 18-60 VDC red Maximum ripple 3.5 % yellow Control input 0 - 10 VDC 47 K 47 K Isink max. 10 mA white Tach output, pulses per revolution 680
Counter Controller
13
Alarm
Output +
Core-end sleeve
47 V
blue GND
blue
Connection
Fans
30
55
Temp. C
10
45
Temp. C
50002-1-0174
50003-1-0174
Tolerance 3 K
529
Contacts
Technology
Accessories
EC-SYSTEMS
38,5
6,9
450 +20
Speed display
EC centrifugal, forward
EC centrifugal, backward
Nominal voltage
Output voltage
Output current
Current draw
Mass
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal data
Type CCC 000-AC04 -01
subject to alterations
VAC 1~ 100-277
Hz 50/60
VDC 20 @ 50 mA
Pa 50-500
C -25 to +60
167
89,5
35,5
195 1800,4
5,5 7,5
530
10
950,2 115
125 43
1,5 10,5
162
Frequency
Linear
20 V IN
0-10 V PWM
+10 V
Night
COM
COM
Tach
GND
GND
GND
GND
GND
OUT
Day
NC
NC
PE
PE
ST1
ST2
ST7
ST8
ST3
ST4
Control terminals
Line terminals
Connector Connection
ST1 PE L N ST2 PE L N ST7 ST8 NC COM NC COM
Assignment / function
Protective earth Mains 50/60 Hz, phase Mains 50/60 Hz, neutral Protective earth Mains 50/60 Hz, phase Mains 50/60 Hz, neutral Relay contact for alarm, break for failure Relay contact for alarm Relay contact for alarm, break for failure Relay contact for alarm
Connector Connection
ST3 20 V IN GND ST4 Tach OUT GND +10 V 0-10 V PWM GND Day GND Night GND
Assignment / function
DC voltage supply (optional), with reverse polarity protection Tach output from fan Control voltage for fan, 0-10 V GND Set value potentiometer, supply 10 V (-10 %), 10 mA Set value potentiometer Set value potentiometer Selector switch terminal Selector switch terminal Selector switch terminal Selector switch terminal GND
531
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
50
532
90
24
Electr. connection:
Selector switch
Day
Party
Night
+10 V
red
Connection fan
blue
yellow
GND
+10 V Fan
0-10 V output
533 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Supply voltage
Nominal data
Part no. 21487-1-0174
subject to alterations
VAC 1~ 230
kg 0.4
RS232
RS485 22
Mode of operation: RS485 2-wire mode with echo and automatic control Galvanic insulation: Min. 1kV insulation voltage between RS232 and RS485 interfaces and between power supply and interfaces ESD immunity: Up to 15 kV (acc. to IEC 801-2, Stage 4) Delivery scope: Interface converter Plug-in supply unit (230 VAC / 12 VDC, 500 mA) Adaptor leads with 2 x 9-pole SUB-D sockets Adaptor leads with 9-pole SUB-D socket Screw terminal RS485
M L+
75
534
105
Nominal data
Part no. 21495-2-0174
subject to alterations
kg 0.1
TRX+ TRX-
19
Mode of operation: RS485 2-wire mode with echo and automatic control Delivery scope: Interface converter, English-language operating manual Electrical terminals: Screw terminal, TRX+ = RSA, TRX = RSB
74
37
535
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
TXD PWR
EC centrifugal, backward
Mass
AC centrifugal, forward
RS422 RS485 RXD
AC centrifugal, backward
General information
RS485 repeater
General remarks: The physical RS485 repeater is used for the connection of two segments on an RS485 basis. It can split a segment with network bus wires that are too long, or with too many nodes into two smaller, standardised units. A maximum of 31 nodes can be connected to the repeater. Installation: The repeater housing is mounted on the wall or in the cable duct with two screws ( 4 mm) or with cable ties. Material: Housing made of galvanised sheet steel Type of protection: IP 20 according to DIN EN 60529
Supply voltage
Power input
Frequency
Nominal data
Part no. 25708-1-0174
subject to alterations
VAC 1~ 200-277
Hz 50/60
VA <3
kg 0.3
38
Bus1
Bus1
Type of transceiver: 2 x ANSI standard RS485 transceiver Galvanic insulation: Operating insulation 500 V between both channels Network connection: Screw terminals Mains connection: Wieland connector GST 18/3 (part of delivery) Pin configuration of network:
Pin No. Assignment / function
not assigned Connection RS485, line B Connection RS485, line B not assigned (each looped through within BUS1 and BUS2)
50
Bus2
Bus2
Mass
8765432 1
8765432 1
1-4 5 6 7, 8
A A B B BUS1 BUS2
12 3 4 5 6 7 8
12 3 4 5 6 7 8
200
LED
30
Supply connection
536
190
.3 4
Assignment / function
PE L
57 61.6 45.4 73 61
black 1
Assignment / function
RS A RS B Operation: +15 V Alarm: Operation: 0V 0 V Alarm: +15 V
111 99
87
Assignment / function
RS B
88
99
61
537
Contacts
Technology
Accessories
RS A
EC-SYSTEMS
EC centrifugal, forward
black 2
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Supply voltage
Frequency
Nominal data
Type CBC 000-AB06 -01
subject to alterations
VAC 1~ 100-240
Hz 50/60
VDC 12
kg
68
44
538
95
Mass
539 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Speed setting
with housing
Material: Housing made of plastic Type of protection: IP 54 Design: The speed setting can be operated with the entire range of ebm-papst EC fans. It is supplied with current via the fan's DC output and supplies a 0-10 V signal that allows infinitely variable open loop speed control. The control also permits fan speed measurement using a multimeter equipped with a frequency meter (for which a tach output is given from the fan). Cable inputs: 4 x M16 or M20 Mounting holes: Suitable for 4 mm mounts
Supply voltage
Resistance
Nominal data
Type CLC 000-AE04 -01
subject to alterations
VDC 10
mA 1.1
k 0-10 Lin
C 50
kg 0.10
65
Speed measurement: Connect a frequency meter to the connection points (labelled + and -) on the PCB board. The fan outputs 1 pulse per revolution, so that the measured frequency can be converted into rpm using the following equation: rpm = frequency (Hz) x 60 Comment: A single controller can be used to control multiple fans with the same speed setting. The connection to the controller is made using four screw connections or one Molex connection (adaptor lead available). If the tach cable is required, this device can only be connected to a fan. Note that in rare operating cases, it is possible that permanent connection of the tach cable can cause a slight decrease in the maximum speed.
58
26
65
50 25
50
540
Mass
Electr. connection:
red yellow
Fan 2 Fan 1
blue white
red
white
blue
GND
Tacho
Control
541 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Speed setting
without housing
Design: The speed setting can be operated with the entire range of ebm-papst EC fans. It is supplied with current via the fan's DC output and supplies a 0-10 V signal that allows infinitely variable open loop speed control. The control also permits fan speed measurement using a multimeter equipped with a frequency meter (for which a tach output is given from the fan). Mounting hole: 10 mm
Supply voltage
Resistance
Nominal data
Type CLC 000-AD04 -01
subject to alterations
VDC 10
mA 1.1
k 0-10 Lin
C 50
kg 0.05
36 28
4 x 3,5
22
Speed measurement: Connect a frequency meter to the connection points (labelled + and -) on the PCB board. The fan outputs 1 pulse per revolution, so that the measured frequency can be converted into rpm using the following equation: rpm = frequency (Hz) x 60 Comment: A single controller can be used to control multiple fans with the same speed setting. The connection to the controller is made using four screw connections or one Molex connection (adaptor lead available). If the tach cable is required, this device can only be connected to a fan. Note that in rare operating cases, it is possible that permanent connection of the tach cable can cause a slight decrease in the maximum speed.
50
36 28
12
542
Mass
Electr. connection:
red yellow
Fan 2 Fan 1
blue white
red
white
blue
GND
Tacho
Control
543 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
LISA
Control software for EC-SYSTEMS
Version: LISA 5.1 Features: Individual control and monitoring of max. 7,905 fans Group-oriented arrangement of the fans Level 1: Overview display for 10 floors Level 2: Overview display for 255 groups within a floor Level 3: Overview display for 31 fans within a group Broadcast command for one group or all fans Speed, temperature or pressure control Error message
Suitable for: EC motors and electronics with ebmBUS System requirements: Windows 2000 / XP
544
Fan Control
Control software & accessories for Pocket PCs / PDAs
Version: Fan Control 1.00 Features: Managing up to 31 fans Setting pre-set values and indicating actual values Setting parameters for PID control Setting fan address Setting mode of operation (heating/cooling) Alarm diagnosis Language selection for user interface
Mode of operation
Fan address
Graphic setting
545
Contacts
Technology
Accessories
EC-SYSTEMS
Delivery scope: Installation-CD, interface converter (RS232-RS485), BUS cable, installation instruction and detailed manual (PDF). The Pocket PC / PDA and compatible serial communication cables are not included in the scope of delivery. Suitable for: EC motors and electronics with ebmBUS System requirements: Pocket PC / PDA with Windows Mobile 5.0, RS232 interface, and serial communication cable. Compatible Pocket PCs / PDAs: (as of 2006-09-14) Hewlett-Packard rx1950 Hewlett-Packard hx2190 Fujitsu-Siemens Pocket Loox C550 Dell Axim x51v (624 MHz) Refer to our website at www.ebmpapst.com/downloads for a continuously updated list of approved Pocket PCs / PDAs along with the suitable serial communication cables.
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
HMS controller
General remarks: The HMS controller is governed by a microprocessor and is specifically designed for Heat Management Systems (= HMS). This controller allows for an almost limitless programming variety as regards customer-specific fan speed / temperature profiles. Moreover, this controller offers a multitude of the most diverse alarm configurations. Our HMS controller has been specially designed and adjusted to the product range of ebm-papst in Mulfingen. Thus, any size of our fans or blowers can be used. The most diverse of applications needing temperature-dependent control are possible. Among these are applications in telecommunication and the IT industry, in refrigeration and air-conditioning as well as in specific industrial plants and systems.
Supply voltage
Nominal data
Type CCC 000-AA05 -03
subject to alterations
VDC 16-57
W 10
W 130
kg
160
546
70
75.5
7.25
100 81
Features: 4 fan speed / temperature characteristics that can be programmed independent of each other 2 programmable no-frost relays for connection of 115 / 230 VAC heating devices 5 programmable alarm relays (with time lag): Temperature alarm (over- / under-temperature) Fan good / bad alarm programming Temperature sensor alarm Programmable depending on signal inputs 4 programmable status outputs (with time lag): With "open collector" design to connect optical or acoustic displays / alarms Each fan speed can be set individually 4 signal inputs for external switch Connection of two independent temperature sensors (NTCs) possible RS232 interface galvanic insulated Selective protection of each fan programming via Windows software (terminal program version 15 ff.: part no. 25710-2-0199) Requirements: Supply voltage of HMS controller: 16-57 VDC Fans with standard interface 24 / 48 VDC fan voltage PWM / linear control input (0-10 V) Open collector tach output NTC with R25 = 33 k (EPCOS type M 891/33k/J) System requirements: Windows 2000 / XP Safety: According to EN 50178 EMC / EMI: Interference immunity EN 61000, interference emission EN 50081-1
Mass
L1 K1 H1 H2
F6 10 A
- +
F1 3,15 A
* / 250 V
* / 250 V
K2 Fan 2 Heater 2
+ + + +
RD DTR TD GND RTS
PWM
Hall
* / 250 V
F2 3,15 A
N N
F7 10 A
PWM
Hall
* / 250 V
* / 250 V
F3 3,15 A
Fan 3
PWM
Hall
* / 250 V
Alarm 1 Alarm 2
Alarm 3 Alarm 4
Alarm 5
F4 3,15 A
Fan 4 K7
Status
1 2 3 4
K3
K4
K5
K6
PWM
Hall
* / 250 V
Alarm contact
1 2 3 4
NTC 1
1
NTC 2
1 1
F5 3,15 A
2 4 3 5 7
0-57 V / 10 mA
547
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
548
Accessories
Inlet nozzles
Guard grilles
553
550
558
564
549 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward
Contacts
Technology
Accessories
AC centrifugal, forward
AC centrifugal, backward
General information
Inlet nozzles
o
Vers. 2
118
Vers. 3
45
r1
r2
m n r3
3 4,
24
4x90
R1 4
7
2,8
5
6x6 0
242
6x6
5,5
Size(1) 120 133 220 225 250 310 310 310 (2) 355 355 (2) 400 450 450 500 500 560 630 (P) (P) (P) (P) (P/S) (P) (A) (A) (A) (A) (A) (A) (A) (A) (A) (A) (A)
Vers. 1 1 1 2 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1
k 146.0 129.0 170.0 252.0 223.0 255.0 280.0 300.0 300.0 300.0 350.0 350.0 350.0 370.0 413.0 450.0 520.0 470.0 515.0 634.0
m 94.4 87.0 125.5 155.0 146.0 164.5 182.5 192.0 211.0 211.0 224.0 240.0 240.0 257.0 287.0 289.0 323.0 342.0 385.0 433.0
o 18.0 13.0 14.0 21.0 28.0 31.0 35.0 53.0 48.0 27.5 60.0 60.0 30.0 66.0 71.0 75.0 79.0 75.0 82.0 98.5
q 0.80 1.00 1.25 0.80 1.50 1.50 1.50 1.00 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00
r1 16.0 8.0 10.0 22.0 25.0 28.0 31.0 30.0 18.0 10.0 54.0 22.5 11.0 22.0 25.0 28.0 28.0 28.0 30.0 37.0
r2 60.0 55.5 32.0 28.0 70.0 35.0 50.0 55.0 87.0 65.0 87.0 95.0 14.0
r3 35.0 20.0 44.0 22.0 100.0 49.0 115.0 55.0 60.0 72.0
s 134.0 118.0 158.0 210.0 240.0 260.0 280.0 280.0 325.0 325.0 325.0 390.0 425.0 430.0 445.0 490.0 600.0
t 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 6x9 6x9 6x9 6x9 6x9
u 126.0 103.0 146.0 199.0 196.0 221.0 245.0 257.0 256.0 236.0 284.0 296.0 267.0 322.0 362.0 360.0 408.0 412.0 461.0
90.0 345.0
6x10.5 525.0
(1) size with key for impeller material: (P) = plastic, (S) = sheet steel, (A) = aluminium (2) short inlet nozzle
550
0,5xD
Size
k-value
31100-2-4013 31110-2-4013 35600-2-4013 35610-2-4013 54515-2-4013 54514-2-4013 64015-2-4013 54518-2-4013 64025-2-4013 64030-2-4013 64040-2-4013
subject to alterations
96400-2-4013 96410-2-4013 31080-2-4013 31090-2-4013 35580-2-4013 35590-2-4013 54500-2-4013 54510-2-4013 64005-2-4013 54516-2-4013 64002-2-4013 64001-2-4013 64000-2-4013
250 280 310 310 355 355 400 450 450 500 500 560 630
68 80 120 103 155 138 183 217 214 265 283 350 480
96359-2-4013 96360-2-4013 31050-2-4013 31051-2-4013 35560-2-4013 35561-2-4013 54476-2-4013 54478-2-4013 63045-2-4013 54480-2-4013 63072-2-4013 63071-2-4013 63070-2-4013
551
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
Inlet nozzles with measuring device to determine air flow for backward curved centrifugal fans
AC centrifugal, forward
AC centrifugal, backward
General information
Inlet nozzles
Material: Galvanised sheet steel
Vers. 1
106 f
r
Vers. 2
6x6 0
Vers. 3
95
45
5 4,
19 4
u b
6x6
5,5
Size 076 / 085 097 (1) 108 120 133 140 / 146 160 180 200 / 225 250 (3) 280 (3) 310 (3) 355 (3) 400 (3) 450 (3)
(1)
Vers. 1 1 1 1 1 1 1 (2) 3 2 1 1 1 1 1 1
a 92.0 116.0 129.0 142.0 150.0 170.0 185.0 210.0 230.0 300.0 336.0 374.0 413.0 456.0 530.0
b 63.4 80.0 87.0 100.0 112.0 125.5 130.0 149.0 175.0 193.0 228.0 257.0 289.0 325.0 365.0
c 84.0 108.0 118.0 132.0 142.0 158.0 175.0 213.0 285.0 315.0 350.0 390.0 430.0 510.0
d 6.0 10.0 13.0 9.0 12.0 14.0 17.0 28.0 24.0 51.5 58.5 62.5 71.5 79.5 91.5
e 3x4.2 3x4.5 4x4.5 4x4.5 4x4.5 4x4.5 4x4.5 6x5.5 6x7 6x7 6x9 6x9 6x9 6x9
4x90
)
87
(2
192
f 0.80 0.80 1.00 1.00 1.00 1.25 0.75 1.25 1.25 1.50 1.50 1.50 1.50 1.50 1.50
r 6.8 10.0 8.0 8.0 10.0 10.0 12.0 25.0 20.0 27.3 36.5 39.5 43.5 45.5 49.5
552
Guard grille
Vers. 1 Vers. 2
Vers. 1 1 2 2 2 2
553
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
3x1
20
AC centrifugal, backward
4x
90
General information
Guard grille
a 11
b
Material: Welded grille made of galvanised steel, frame made of tinned sheet iron 0.4 mm thick
4,5
(4)
Size 160
Size 076 / 085 108 120 140 / 146 160 (4) 180 (5)
(3)
100
a c
max. e b
b 6.0 3.5 8.5 3.5 39.5
Coating plastic coated, silver-metallic gloss plastic coated, silver-metallic gloss galvanised, chromatised in blue galvanised, chromatised in blue phosphated, plastic coated in RAL no. 9005
554
Guard grille
b max. 8
Material: Steel wire
3x1
20
4,3 c
Size 097
(1)
Coating phosphated, plastic coated in RAL no. 9005 phosphated, plastic coated in RAL no. 9005 phosphated, plastic coated in RAL no. 9005 plastic coated, silver-metallic gloss phosphated, plastic coated in RAL no. 9005
b max. 8
3x1
20
e c
Guard grilles for centrifugal blowers with dual inlet (versions with EW motor) Accessories 555 Contacts Technology
Part no. 35000-2-4039 62226-2-4039 62227-2-4039 62228-2-4039 25825-2-4039
subject to alterations
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Guard grille
133 13
Material: PA plastic 6.6 GV25 V0, black Special feature: Triangular, raised contour Suitable for: D2E140-HR; D2E146-KA; D2E146-KB; D2E146-HR; D2E146-HS; D2E146-HT; D4E146-LV
31
Guard grilles for blowers with dual inlet with plastic housing (cable exit side of blower)
Part no. 34265-2-2929
subject to alterations
133
13
Material: PA plastic 6.6 GV25 V0, black Special feature: Outer two rings are closed Suitable for: D2E140-HR; D2E146-KA; D2E146-KB; D2E146-HR; D2E146-HS; D2E146-HT; D4E146-LV; K4E146-AB
31
Guard grilles for blowers with dual inlet with plastic housing (side of blower opposite cable exit)
Part no. 38182-2-2929
subject to alterations
556
Guard grille
6x6 0
Material: Phosphated steel wire, plastic coated in RAL no. 9005, black
max. 8 b
AC centrifugal, forward
Size 200 250 300 a 250.0 295.0 380.0 b 227.0 265.0 323.0 c 6.0 7.0 9.0
557
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, backward
General information
Connection leads
AMP Universal Mate-N-Lok, suitable for: Connector shell AMP 926 682-3 Plug pin AMP 926 886-1 Jacketed cable, internal leads H03VV-F6G0.5 black
6 85 a
Suitable for: D2E140-HR; D2E146-KA; D2E146-KB; D2E146-HR; D2E146-HS; D2E146-HT; D2E160-FI; D2E160-FK Plug assignment: 1 = Step 1 (white) 2 = Step 2 (red) 3 = Step 3 (grey) 4 = Step 4 (black) 5= N (blue) 6 = PE (green/yellow)
AMP Universal Mate-N-Lok suitable for: Connector shell AMP 927 231-3 Plug pin AMP 926 886-1
6 85 a
Suitable for: D4E146-LV; K4E146-AB Plug assignment: 1 = Step 1 (white) 2 = Step 2 (red) 3 = Step 3 (grey) 4 = Step 4 (orange) 5 = Step 5 (black) 8 = N (blue) 9 = PE (green/ yellow)
558
Connection leads
AMP Mate-N-Lok female connector
Core-end sleeves
8 85 800
Core-end sleeves
8 85 800
559
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Capacitors
Material: Housing made of Thermoplast Connection lead: Multi-lead PVC cable 0.5 mm2 with brass lead tips Approval: VDE according to DIN EN 60252 (VDE 0560/8) Calculated life time: 400 V; -25 to +85C; 30,000 hrs; class A 450 V; -25 to +85C; 10,000 hrs; class B
10
c 10 7 1
a M8
Capacity 1.0 F 1.5 F 2.0 F 2.5 F 3.0 F 4.0 F 5.0 F 6.0 F 7.0 F 8.0 F 10.0 F 12.0 F 14.0 F 16.0 F 20.0 F 25.0 F
a 25-28 25-28 25-28 25-28 25-28 28-32 30-36 30-36 30-36 35-40 35-40 40.0 40-45 35-40 40.0 40.0
b (max.) 58.0 58.0 58.0 70.0 70.0 58.0 70.0 70.0 72.0 72.0 72.0 72.0 92.0 95.0 95.0 120.0
c 235.0 235.0 235.0 235.0 235.0 235.0 235.0 235.0 100.0 235.0 200.0 100.0 150.0 100.0 235.0 235.0
560
Capacitors
c 10 b a + 3,5
Material: Plastic cap, aluminium cup Designation: FPU or P2 according to IEC 252 (non-flammable, non-explosive, circuit-breaking) Approval: VDE according to DIN EN 60252 (VDE 0560/8) Calculated life time: 420 V; -25 to +85C; 30,000 hrs; class A 470 V; -25 to +85C; 10,000 hrs; class B 500 V; -25 to +85C; 3,000 hrs; class C
a M8
7 1
35 +5 235 +10 -5
Part no. 02151-4-7320 02155-4-7320 02156-4-7320 02159-4-7320 02160-4-7320 02161-4-7320 02162-4-7320 02163-4-7320 02164-4-7320 02165-4-7320 02166-4-7320 02167-4-7320 90026-4-7320 02168-4-7320 02169-4-7320 02170-4-7320
subject to alterations
Capacity 1.0 F 1.5 F 2.0 F 2.5 F 3.0 F 4.0 F 5.0 F 6.0 F 7.0 F 8.0 F 10.0 F 12.0 F 14.0 F 16.0 F 20.0 F 25.0 F
a 25-30 25.0 25.0 30.0 30.0 25-30 25-30 30.0 30-35 30-35 35.0 35.0 40.0 40.0 40.0 40-45
b (max.) c (max.) 77.0 77.0 77.0 71.0 71.0 104.0 104.0 101.0 101.0 102.0 96.0 96.0 130.0 96.0 116.0 116.0 92.0 92.0 92.0 92.0 135.0 113.0 110.0 110.0 111.0 110.0 139.0 130.0 130.0 130.0 110.0 92.0
Pull-off protector: The housing expands by max. 9 mm. The protector responds to overload by the generated excess pressure snapping off the internal lead in a predetermined breaking point. Mounting: c is the overall dimension of the capacitor which has to be taken into account when mounting the part. The capacitor design, however, depends on the manufacturer. The expansion (9 mm) is either added to dimension b, or it is already integrated in the capacitor.
max. 9 mm
561
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Terminal box
= 91,5 b a 56 = 3 c
Material: ABS Description: Two-piece terminal box for AC motors of size 068 or 074, terminal strip with 4- or 7-pole. Suitable for installation of capacitor with 10 F max. Type of protection: IP 54
12
94
29
18
27,5
Terminal box
Part no. 64442-1-7612 64444-1-7612 64443-1-7612 64445-1-7612
subject to alterations
562
58
Air filter
e
Material: Steel wire / sheet steel, plastic coated in RAL no. 9005, black Filter: Viledon filter type R: PSB / 29 OS (according to DIN 24185) Separation capacity: < 86 % Efficiency: < 20 % Dust binding capacity: 650 g/m2
563
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal voltage
Current draw
Frequency
Nominal data
Type TCD 020-AA01 -05 TCD 040-AA01 -05 TCD 070-AA01 -05
subject to alterations
266
185
166
309
224
304
564
189
189
4x5,5
Mass
Nominal data
Type TCE 021-AA01 -05 TCE 040-AA01 -05 TCE 075-AA01 -05
subject to alterations
144
167
147
204
154
200
565
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
4x7
86
EC centrifugal, backward
Nominal voltage
Current draw
Frequency
Mass
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal voltage
Current draw
Frequency
Nominal data
Type TPD 250-AB01 -01 TPD 250-AB01 -02 TPD 250-AB01 -03
subject to alterations
Mass Auxiliary contactor without auxiliary contactor with break contact with make contact
Electr. connection:
68 7
54,5 66,5
566
Nominal data
Type TPE 100-AB01 -01 TPE 100-AB01 -02 TPE 100-AB01 -03
subject to alterations
Auxiliary contactor without auxiliary contactor with break contact with make contact
52,5
103
46
70 78
45
EC centrifugal, backward
Nominal voltage
Current draw
Frequency
Mass
AC centrifugal, forward
AC centrifugal, backward
General information
Nominal voltage
Current draw
Frequency
Nominal data
Type TPD 250-AA01 -01 TPD 250-AA01 -02 TPD 250-AA01 -03 TPE 100-AA01 -01 TPE 100-AA01 -02 TPE 100-AA01 -03
subject to alterations
Mass Auxiliary contactor without auxiliary contactor with break contact with make contact without auxiliary contactor with break contact with make contact
79
92 80
141
38
20
568
569
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
570
Technology
Impellers
572
571 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward
Contacts
Technology
Accessories
AC centrifugal, forward
AC centrifugal, backward
General information
High standards for all ebm-papst products Here at ebm-papst, we constantly strive to further improve our products in order to be able to offer you the best possible product for your application. Careful monitoring of the market ensures that technical innovations are reflected in the improvements of our products. Based on the technical parameters listed below and the ambience you want our product to operate in, we here at ebm-papst can always work out the best solution for your specific application.
General performance parameters Any deviations from the technical data and parameters described here are listed on the product-specific data sheet. Type of protection The type of protection is specified in the product-specific data sheets. Insulation class The insulation class is specified in the product-specific data sheets. Mounting position The mounting position is specified in the product-specific data sheets. Condensate discharge holes Information on the condensate discharge holes is provided in the product-specific data sheets. Mode of operation The mode of operation is specified in the product-specific data sheets. Protection class The protection class is specified in the product-specific data sheets.
Service life The service life of ebm-papst products depends on two major factors: The service life of the insulation system The service life of the bearing system The service life of the insulation system mainly depends on voltage level, temperature and ambient conditions, such as humidity and condensation. The service life of the bearing system depends mainly on the thermal load on the bearing. The majority of our products use maintenance-free ball bearings for any mounting position possible. As an option, sleeve bearings can be used, which is indicated on the product-specific data sheet wherever applicable. The service life L10 of the ball bearings can be taken as approx. 40,000 operating hours at an ambient temperature of 40 C, yet this estimate can vary according to the actual ambient conditions. We will gladly provide you with a lifetime calculation taking into account your specific operating conditions. Motor protection / thermal protection Information on motor protection and thermal protection is provided in the product-specific data sheets. Depending on motor type and field of application, the following protective features are realised: Thermal overload protection (TOP), either in-circuit or external PTC with electronic diagnostics Impedance protection Thermal overload protection (TOP) with electronic diagnostics Current limitation via electronics If an external TOP is connected, the customer has to make sure to connect a conventional trigger device for switching it off. All fans with 1~ AC voltage are equipped with a TOP that is connected in the winding circuit. Products without fitted TOP and without protection against improper use, a motor protection complying with the valid standards has to be installed.
572
Left: Endurance test room Middle: Shock test Right: Chamber test rig
All ebm-papst products are subjected to comprehensive tests complying with the normative specifications. In addition to this, the tests also reflect the vast experience and expertise of ebm-papst. Vibration test Vibration tests are carried out in compliance with Vibration test in operation according to DIN IEC 68, parts 2-4 Vibration test at standstill according to DIN IEC 68, parts 2-4 Shock load Shock load tests are carried out in compliance with Shock load according to DIN IEC 68, parts 2-27 Balancing quality Testing the balancing quality is carried out in compliance with Residual imbalance according to DIN ISO 1940 Standard balancing quality level G 6.3 Should you require a higher balancing quality level for your specific application, please let us know and specify this when ordering your product.
The products described in this catalogue are designed, developed and produced in keeping with the standards in place for the relevant product and, if known, the conditions governing the relevant fields of application. Standards Information on standards is provided in the product-specific data sheets. EMC Information on EMC standards is provided in the product-specific data sheets. Complying with the EMC standards has to be established on the final appliance, as different mounting situations can result in changed EMC properties. Leakage current Information on the leakage current is provided in the product-specific data sheets. The measurement takes place according to Fig. D.1 according to IEC 60990, Fig. 4. Approvals
Chemo-physical strain / performance parameters Should you have questions about chemo-physical strain, please direct them to your ebm-papst contact. Fields of application, industries and applications Our products are used in various industries and applications: Ventilation, air-conditioning and refrigeration technology, clean room technology, automotive and rail technology, medical and laboratory technology, electronics, computer and office technology, telecommunications, household appliances, heating, machines and plants, drive engineering. Our products are not designed for use in the aviation and aerospace industry!
In case you require a specific approval for your ebm-papst product (VDE, UL, GOST, CCC, CSA, etc.) please let us know. Most of our products can be supplied with the relevant approval. Information on existing approvals is provided in the product-specific data sheets. Air performance measurements All air performance measurements are carried out on inlet-side chamber test rigs in conformity with the requirements of DIN 24163 and ISO 5801. intake and discharge (installation type A according to DIN 24163 Part 1) and are operated at nominal voltage (for AC, also at nominal frequency) without additional attachments such as the guard grille. As required by the standard, the air performance curves correspond to an air density of 1.2 kg/m3.
573
Contacts
Technology
The fans being tested are installed on the measuring chamber at free air
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Measurement conditions for air and noise measurement ebm-papst products are measured under the following conditions: Axial and centrifugal fans with direction of air flow "V", without guard grille and in the wall ring Backward curved centrifugal fans, free-running and with inlet nozzle Forward curved single and dual inlet centrifugal fans with housing
Noise measurements All noise measurements are carried out in low-reflective test rooms with reverberant floor. Thus the ebm-papst acoustic test chambers meet the requirements of precision class 1 according to DIN EN ISO 3745. For noise measurement, the fans being tested are placed in a reverberant wall and operated at nominal voltage (for AC, also at nominal frequency) without additional attachments such as the guard grille. Sound pressure level and sound level All noise levels are measured in conformity to DIN 45635 and ISO 3744/3745 according to precision class 2 and specified A-weighted. When the sound pressure level (Lp) is measured, the microphone is on the intake side of the fan being tested, usually at a distance of 1 m on the fan axis. To measure the sound level (Lw), 10 microphones are distributed over an enveloping surface on the intake side of the fan being tested (see graphic). The sound level measured can be roughly calculated from the sound pressure level by adding 7 dB. Measurement configuration according to DIN 45635 T38: 10 measuring points dD Measurement area S = 6d2 + 7d (h + 1.5d) h = 1.5d to 4.5d
1,5d
2d
574
3d
Adding 2 noise sources with the same volume results in a level increase be determined in advance based on the noise values specified in the data sheet. This is shown in the diagram opposite. Example: 8 A3G800 axial fans are on a condenser. According to the data sheet, the sound pressure level of a fan is approximately 75 dB(A). The level increase measured from the diagram is 9 dB. Thus the overall sound level of the installation can be expected to be 84 dB(A).
Increase in sound pressure / sound power level
[dB]
10
10
15
20 25
Adding two noise sources with different levels The acoustic performance of two different fans can be predetermined diagram opposite. Example: There is an axial fan A3G800 with a sound pressure level of 75 dB(A) at the operating point and an axial fan A3G710 with 71 dB(A) in a ventilation unit. The level difference is 4 dB. The level increase can now be read in the diagram as approx. 1.5 dB. This means that the overall sound level of the unit can be expected to be 76.5 dB(A). based on the sound levels given in the data sheet. This is shown in the
1,5
12
16
20
24
The sound level is independent of the distance from the noise source. noise source increases. The diagram to the right shows the level decrease expressed in terms of an output measurement at a distance of 1 m from
Decrease in sound pressure level
-26 -10
[dB]
Example: An axial fan A3G800 has a sound pressure level of 75 db(A) at the operating point. Now, you want to measure the noise characteristics at a distance of 20 m. In the diagram to the right, you can now read a reduction of 26 dB for the 20 m distance.
-40
10
20
50
100 [m]
Distance
575
Contacts
Technology
-30
-20
Accessories
[dB]
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
Curves
15
AC centrifugal, forward
AC centrifugal, backward
General information
Impellers
Impellers made by ebm-papst Like pumps and compressors, fans and blowers belong to the category of aerodynamic and fluid work machines. A fan consists of an impeller, a drive motor and a housing for suspension and for guiding the air flow. The blades spaced along the circumference of the impeller are designed in such a way as to cause the flowing work medium to change direction, thus passing on pressure and speed energy.
ebm-papst construction designs Depending on the geometrical shape of the impeller, there are different construction designs, with their names taken from the main flow direction in the impeller. The most important designs are: Axial fans Centrifugal fans with backward curved blades Single or dual inlet centrifugal blowers with forward curved blades Diagonal (mixed flow) fans (a cross between axial and centrifugal fans) Relevant fields of application of the various construction designs The different ebm-papst fan and blower designs correspond to the different fields of application: Small back pressures: axial fans High back pressures: centrifugal fans with backward curved blades and single or dual inlet centrifugal blowers Threshold between axial and centrifugal fans: diagonal fans
Application-specific selection parameters When selecting an application-specific fan or blower, the main parameters to be taken into account are these: Air flow at given back pressure Constructional design Speed/rpm Impeller diameter Ambient conditions governing suction and exhaust side
axial fans centrifugal fans, backward curved centrifugal blowers, single inlet centrifugal blowers, dual inlet diagonal fans
200
500
1000
2000
5000
10000
20000
50000
[m/h]
576
Axial fans
To the right of the "saddle" (right part of the air performance curve): Minimal noise To the left of the "saddle" (left part of the air performance curve): Stall area Drop in efficiency Soaring noise The optimum operating range of the fan is shaded in green in the curve given here.
[dB(A)] [Pa]
Maximum efficiency
stall area
0 0
[m/h]
Direction of air flow The direction of air flow is given as follows: Direction of air flow "V" Direction of air flow "A" EC-SYSTEMS 577 Contacts Technology Accessories
"V" "A" U
EC centrifugal, forward
EC centrifugal, backward
Operating range
AC centrifugal, forward
AC centrifugal, backward
General information
Effects when mounted in wall ring or in the aperture Mounting the fan in a wall ring can significantly increase the air performance in the operating range.
1
Curve
[Pa] [%] 1 2 2 1 0 0 [m/h] 2 1 3 1 3 2 0 0 [m/h] [%]
Wall ring
Aperture
Effects with axial position in the wall ring Axial position in the wall ring influences air performance and efficiency.
1
Curve
[Pa]
578
Mounting a guard grille reduces the air performance of the axial fan.
1 2
0 [m/h]
The pressure drop in Pa can be roughly calculated according to the following equation: pGG = GG . 10-8 . V2 V in [m3/h]
Diameter D
130 143 180 200 250 300 315 350 400 450 500 560 630 710 800 910 990
Correction factor GG
10000 2550 1650 650 300 240 150 90 55 35 20 11 6 3 1.5
For the guard grilles used at ebm-papst, the correction factor GG can be used depending on the impeller diameter D from the table to the right.
579
Contacts
Technology
0.9
Accessories
EC-SYSTEMS
6600
EC centrifugal, forward
EC centrifugal, backward
Curve
[Pa] [%]
AC centrifugal, forward
AC centrifugal, backward
General information
Effects of obstructions on the suction or exhaust side Disturbances or obstructions on the suction or pressure side reduce the air performance of the axial fan. Obstructions on the inlet side
1 2 3 4
Curve
[Pa]
0 0 [m/h] 1 2 3 4
X D
5
[Pa]
2 5 0 0 [m/h] 4 3 1
580
Middle part of air performance curve: Minimal noise To the right and the left of the middle part of the air performance curve: Reduced efficiency Increasing noise The optimum operating range of the fan is shaded in green in the curve given here.
[dB(A)] [Pa]
Maximum efficiency
Effects of nozzle gap dimension The centrifugal air gap between the inlet nozzle and impeller cover plate influences the air performance and efficiency of the centrifugal fan.
1 2
3 0 0
[m/h]
EC centrifugal, forward
EC centrifugal, backward
Operating range
AC centrifugal, forward
AC centrifugal, backward
General information
Effects of overlapping dimension The axial overlap between the inlet nozzle and impeller cover plate influences the air performance and efficiency of a centrifugal fan.
1 2
Curve
[Pa] 1 2 3 [%] [m/h] 2,6 2,8
1 3 2
0 0
Effects of installation space When mounting our product in a rectangular box, air performance might be reduced.
Curve
0,5xD
0,92 1,4
0,93
0,94
0,95
0,96
0,97
0,98
0,99
1,00
1,6
1,8
2,0
2,2
2,4
dh = Hydraulic diameter Formula: dh = 2 x B x H / (B + H) B = Width of box H = Height of box D = Outer diameter of the fan
582
pressure-measuring point The differential pressure approach compares the static pressure before the inlet nozzle with the static pressure inside the inlet nozzle.
0,5xD
Air flow can be calculated on the basis of the differential pressure (difference in pressure of the static pressures) in keeping with the following equation: V = k . p kept constant: V in [m3/h] and pW in [Pa] pW = V2 : k2
If constant air flow control is used, then the nozzle pressure has to be k takes into account the specific nozzle characteristics. One or four pressure measuring points are spaced along the circumference of the inlet nozzle. Connection on the customer side is accomplished via a premounted T tube connector. This tube connector is suited for pneumatic hoses with an internal diameter of 4 mm.
583
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Single and dual inlet centrifugal blowers with forward curved blades
The forward curved centrifugal impeller must always be operated inside a scroll housing. A dual inlet centrifugal blower shows the same behaviour as two single inlet blowers operated in parallel: with size, speed and pressure being identical, double the air flow is achieved. Operating range Middle part of air performance curve: Minimal noise higher performance density than with the backward curved centrifugal fan To the right and the left of the middle part of the air performance curve: Reduced efficiency Increasing noise The optimum operating range of the fan is shaded in green in the curve given here.
optimum operating range
0 0 [m/h] [dB(A)] [Pa]
Maximum efficiency
Dimensioning of the scroll The dimensions of a typical scroll can be calculated with the following formulae, subject to the impeller diameter D:
J
45
45
H
26
45
45
584
45
45
1 2
0 [m/h]
Effects of obstructions on the intake side Obstructions on the air intake side reduce the air performance of the centrifugal blower.
1 2 3 4 5
Curve EC-SYSTEMS
5 0 0 [m/h] 4 3 2 1 [Pa]
x/D= x / D = 30 % x / D = 23 % x / D = 15 %
585
Contacts
Technology
Accessories
x / D = 7.5 %
EC centrifugal, forward
EC centrifugal, backward
Curve
[%]
AC centrifugal, forward
AC centrifugal, backward
General information
Effects caused by obstructions on the inlet side for constant air flow EC centrifugal blowers Constant air flow is attained with unimpaired inflow only. An obstructed (e. g. asymmetrical or partially blocked) air flow can have a significant effect on the curve behaviour and cause large deviations from a constant air flow curve. Examples of obstructed inflows
Instructions for designing a sufficiently unobstructed inflow: The distance x between the blower intake and neighbouring walls or obstructions should be at least 25 % of the impeller diameter. Inflows with angular momentum or asymmetrical rotation should be avoided. The inflow can be made more uniform using resistances such as those from filters or grilles. On request, we offer calibrated blower designs that incorporate a specific installation situation.
586
Directly to the right of the "saddle" (right part of the air Maximum efficiency Minimal noise To the left of the "saddle" (left part of the air performance curve): Stall area Drop in efficiency Soaring noise The saddle of the diagonal / mixed flow fan is slightly higher than that of the axial fan. This means that the technical ratings in the optimal
0 [dB(A)] [Pa]
performance curve):
The optimum operating range of the fan is shaded in green in the curve given here.
0 [m/h]
Mounting information The conical housing (part of delivery) makes sure the necessary gap EC-SYSTEMS 587 Contacts Technology Accessories dimension is kept. Effects The effects of the diagonal / mixed flow fan are similar to those listed for the axial fan (p. 577-580).
EC centrifugal, forward
stall area
EC centrifugal, backward
Operating range
AC centrifugal, forward
AC centrifugal, backward
General information
Curve Influence of speed n A change in speed influences: Air flow V V~n Static pressure increase pfa pfa ~ n2 Requirement of energy P1 P1 ~ n3
[%] 160 140
120
100
1.1n n 0.9n
60
80
0 0
20
40
20
40
60
80
100
120
140 [%]
Curve
[dB]
Influence of the speed n on the sound level Lw When the speed changes, the approximate sound level can be determined using the diagram to the right and the following formula: Lw - Lw = 50 dB . log (n : n )
2 1 2 1
Lw1 = Sound level after speed change Lw2 = Sound level before speed change n1 = Changed speed n2 = Starting speed
-20
-10 0,5
10
20
1,5
2,5
588
Influence of impeller diameter D A change in impeller diameter influences: Air flow V V~ D3 Static pressure increase pfa pfa ~ D2 Requirement of energy P1 P1 ~ D5
1.3D 140
120
1.2D
100
1.1D D 0.9D
20
40
60
80
100
120
140 [%]
Curve EC-SYSTEMS
0.7b 0.9b 0.6b 0.8b 1.1b b 1.3b 1.2b 1.4b 0 20 40 60 80 100 120 140 [%]
Influence of width of air discharge b (only for centrifugal impellers) A change in width of the air discharge influences, in approximation: Air flow V V~b Static pressure increase pfa pfa = const Requirement of energy P1 P1 ~ b
[%]
60
80
100
120
140
160
589
Contacts
Technology
Accessories
20
40
EC centrifugal, forward
20
40
60
80
EC centrifugal, backward
Curve
[%] 160
AC centrifugal, forward
AC centrifugal, backward
General information
Motors
Motors made by ebm-papst In AC and EC technology, ebm-papst relies on the proven external-rotor motor principle, with the rotor turning around the stator within. Advantages of the ebm-papst external-rotor principle are: Space saving design due to integrated bearings and direct installation inside the impeller lower load and more precise balancing of the bearing due to the fixed connection of all rotating elements Prolonged service life due to the motor-impeller unit placed right within the air flow The ebm-papst motors achieve very good results in efficiency and acoustic behaviour when used in EC technology.
Features
Shaded-pole motor
AC motors
Single-phase capacitor motor Yes 3-phase motor
EC motors
Single-core motor 3-core motor
Yes
Limited use
(Steinmetz circuit)
Yes
Yes
No
No
Yes
No
Yes
No
No
No
Yes
Yes
Steinmetz circuit Rotor principle Efficiency Continuous speed setting integrated Noise behaviour Squirrel cage Low No Medium Squirrel cage Medium No Good Squirrel cage Good No Excellent Magnetic rotor Excellent Yes Medium Magnetic rotor Excellent Yes Excellent
590
AC motors
of the asynchronous rotation of the stator rotating field and rotor. Torque curves of the motor types
[Ncm]
Each pole of the motor is divided electro-magnetically into a main and auxiliary pole (split) via a cage winding in order to generate a starting torque. At ebm-papst, shaded-pole motors are available as 2 or 4-pole symmetrical external or internal rotor designs.
2 1 3
MK 4 M St 5
Advantages: Extremely robust motor design due to cast squirrel cage rotor and stable bearing system
Key: 1 EC motor 2 3-phase motor 3 Single-phase motor 4 Shaded-pole motor
Cost-efficient motor Long service life EC-SYSTEMS 591 Contacts Technology Accessories
5 System characteristic MSt Starting torque MSa Saddle torque MK Breakdown torque
Start-up current The start-up current of our AC motors is maximally 4x higher than the nominal current given.
EC centrifugal, forward
M Sa
EC centrifugal, backward
Shaded-pole motor
AC centrifugal, forward
AC centrifugal, backward
General information
Single-phase capacitor motor Two cores (main winding MW and auxiliary winding AW) generate the rotating field of the single-phase capacitor motor via a capacitor connected in series to form an auxiliary winding.
3-phase motor The three motor cores are offset by 120 and generate a circular rotating field when connected to the 3-phase mains.
c 70 F/kW (230 VAC )
Star Advantages: Advantages: Extremely robust motor design due to cast squirrel cage rotor and stable bearing system Diverse options for setting speed Efficiency between 30 % and 75 % (depending on motor size) Long service life Good vibration and noise behaviour
Delta
Steinmetz circuit
Extremely robust motor design due to cast squirrel cage rotor and stable bearing system Very good vibration and noise behaviour Efficiency between 40 % and 80 % (depending on the motor size) Long service life
Steinmetz circuit
592
EC motors
synchronous rotation of stator rotating field and rotor. Torque curves of the motor types
[Ncm]
Electronics
2 1 3
Advantages:
MK 4 M Sa M St 5
Integrated speed setting Efficiency between 50 % and 80 % (depending on the motor size) Long service life
3-core motor
Key: 1 EC motor 2 3-phase motor 3 Single-phase motor 4 Shaded-pole motor 5 System characteristic MSt Starting torque MSa Saddle torque MK Breakdown torque
Advantages: Integrated speed setting Good efficiency between 60 % and 90 % (depending on the motor size) Long service life Very good vibration and noise behaviour even in controlled operation
593
Contacts
Technology
Accessories
EC-SYSTEMS
Electronics
EC centrifugal, forward
EC centrifugal, backward
Single-core motor
AC centrifugal, forward
AC centrifugal, backward
General information
Control technology
Open and closed loop control using ebm-papst technology Depending on the field of application, fan speed has to be adjusted. In AC technology, the speed setting option can result in an increase in installation expenditure and, typically, a less favourable noise performance and an increase in power input. Here, ebm-papst EC technology is a more eco-friendly and cost-efficient alternative. The EC motor with integrated commutation electronics offers high efficiency across the entire speed range and optimal acoustic performance at minimal installation expenditure.
Features
Series resistance
AC
Phase-angle control Phase-angle control with sine filter Frequency inverter Frequency inverter with sine filter
EC commutating electronics
Speed stepping
Transformer
integrated
+ + +
++ +
+ + +
++ ++ ++ +
+ + +
70 1500 60
50
1000
40 500 30
1000
2000
3000
4000
5000
6000
[CFM] [m/h]
1000
2000
3000
4000
5000
6000
[CFM] [m/h]
2000
4000
6000
8000
10000
2000
4000
6000
8000
10000
Key: ebm-papst EC controls Frequency inverter with sine filter Phase-angle control without sine filter Phase-angle control with sine filter Transformer
Key: ebm-papst EC controls Frequency inverter with sine filter Phase-angle control without sine filter Phase-angle control with sine filter Transformer
594
external
+ + +
partial load range can be up to 20 % (depending on the controller) above the specified maximum current. Series resistance
C AW R1
0 1
Speed setting via change in motor voltage Cost-efficient Small capacities Note: Capacitors or chokes reduce the loss capacity.
R2 MW
L1
2 3
N PE
Transformer
L1 Tr
4 3 2 1
C AW ASM 1~
MW
N PE
Phase-angle control
C AW ASM 1~
Continuous speed setting Speed setting via change in motor voltage Cost-efficient Acoustic performance and warming has to be reviewed
L1 N PE
Tr
MW
ASM 3~
Continuous speed setting Speed setting via change in frequency of rotating field High efficiency Note: An all-pole sine filter (phase-phase and phase-earth) has to be used. Technology 595 Contacts
L1
+
U U V W V W
L2 L3
T2 T4 T6
PE
Accessories
in the application
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
When selecting a voltage controller, note that the nominal current in the
AC centrifugal, forward
AC centrifugal, backward
General information
Electrical connections AC
Fans (1~ 230 VAC power line) A1) Single-phase capacitor motor with TOP wired internally
L PE N C
Fans, 1 speed (3~ 230 VAC power line) B) Shaded pole motor with TOP wired internally C1) Delta connection (3~ 230 VAC power system) without TOP
L N = blue = brown = green/ yellow
PE U1 L1 V1 L2 W1 L3
U1
U2 Z
PE
U2
TOP TOP
V2
W2
U1 U2 V1 V2 W1 W2
= = = = = = =
D1) Delta connection (3~ 230 VAC power line) with TOP
PE U1 L1 V1 L2 W1 L3 TOP
U1
U2 Z
U2
V2
W2
U1 U2 V1 V2 W1 W2
= = = = = = =
C
U1 Z U2 TOP TOP
N PE
596
C2) Star connection (3~ 400 VAC power system) E1) Delta connection (high speed) without TOP
PE L1 L2 L3
without TOP
U1 U2 V1 V2 W1 W2 = = = = = = = black green blue white brown yellow green/ yellow
PE U1 L1 V1 L2 W1 L3
U1
V1
W1
U1
V1
W1
U2
V2
W2
U2
V2
W2
U2
V2
W2
with TOP
PE L1 L2 L3 TOP
with TOP
U1 U2 V1 V2 W1 W2 = = = = = = = black green blue white brown yellow green/ yellow
PE U1 L1 V1 L2 W1 L3 TOP
with TOP
U1 U2 V1 V2 W1 W2 = = = = = = = black green blue white brown yellow green/ yellow
PE L1 L2 L3 TOP
U1
V1
W1
U1
V1
W1
U1 V1 W1 W2 U2 V2 TOP TOP
U1 V1 W1 W2 U2 V2 TOP TOP
L1 L2 L3
PE
L1 L2 L3
PE
597
Contacts
Technology
Accessories
EC-SYSTEMS
U2
V2
W2
U2
V2
W2
U2
V2
W2
U1 U2 V1 V2 W1 W2
= = = = = = =
EC centrifugal, forward
U1 U2 V1 V2 W1 W2
= = = = = = =
PE
L1
L2
L3
U1 U2 V1 V2 W1 W2
= = = = = = =
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
The speed of EC motors is set via commutation electronics. Via electronic circuits and depending on the rotor position, this commutation switches the motor currents on and off. Principle of AC-fed commutation electronics
Interface
0-10 VDC PWM
Control unit
Interface
Control unit
Power unit
DC/DC transformer
Rectifier
Commutations unit
Feedback
Commutations unit
Link electrolytic capacitor
Feedback
Drive
Drive
RS485
RS485
Integrated commutation electronics Compact unit Easy to install Low installation expenditure Can be operated all over the world Note: Motors with 12-72 VDC supply voltage have to be fed via electrically isolated supply unit. DC AC
Integrated commutation electronics with switch power supply Protective extra-low voltage 24 / 48 VDC Note: Switch power supply is not included but has to be ordered as accessory. DC AC
598
Input for analogue and digital signals Open and closed loop control as well as monitoring of the motor Integrated EMC filter High efficiency throughout the entire speed range Speed setting via linear set value (0-10 VDC) or PWM signal Low-noise operation across the entire speed range minimal extra costs for additional functions (open / closed loop control) Optional BUS interface
With DC-fed EC motors, certain faults in modes of operation are recognised by the electronics, and the motor is automatically restarted. With AC-fed EC motors, certain faults in modes of operation are recognised by the electronics, and the motor is switched off. The motor restarts automatically after the following failures have been diagnosed: Line failure Phase failure Line under-voltage DC link voltage too high or too low Locked rotor With the following types of failures, there is no automatic restart. Here, hardware or software reset is required: Motor temperature too high Temperature of cooling element or ambient temperature of electronics too high Hall failure Hardware reset Switching off the fan and restarting it after one minute results in hardware reset. Software reset Software reset is via ebmBUS and LISA software, hand-held control terminal, or PDA with Fan Control Software.
599
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Electrical connections EC
12 V
12 V
Speed setting PWM 1 - 10 kHz 100% PWM -> n=max approx. 10% PWM -> n=min < 10% PWM -> n=0 start up at > 1.4 V
Full speed
Speed setting 1 V - 10 V 10 V -> n=max approx. 1 V -> n=min < 1 V -> n=0 start up at > 1.4 V
GND blue
Customer circuit
Line 1 0-10 V PWM Tach GND +
Connection
Fan
red
blue
white
yellow
Line
1
Line
1
600
+ -
+
PWM 10 K 12 V Lin/PWM control input 0-10 VDC / PWM yellow 1 F U
Speed setting PWM 1 - 10 kHz 100% PWM -> n=max approx. 10% PWM -> n=min < 10% PWM -> n=0 start up at > 1.4 V
Full speed
Speed setting 1 V - 10 V 10 V -> n=max approx. 1 V -> n=min < 1 V -> n=0 start up at > 1.4 V
Counter Controller
Customer circuit
Line 1 +10 V PE N L Line 2 0-10 V PWM
Connection
Fan
Tach
GND
brown
blue
green/yellow
red
yellow
blue
white
Line
1
Line
2
601
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
+ -
+
PWM 10 K 12 V U
Voltage output +10 V max. 1.1 mA red Lin/PWM input for set value 0-10 VDC / PWM yellow 1 F
Air flow setting PWM 1 - 10 kHz 100% PWM -> Vmax 17% PWM -> Vmin < 15% PWM -> V= 0m3/h start up at > 1.4 V
Air flow setting 1 V - 10 V 10 V -> Vmax 1.7 V -> Vmin < 1.5 V -> V= 0m3/h start up at > 1.4 V
Counter Controller
Customer circuit
Line 1 +10 V PE N L Line 2 0-10 V PWM
Connection
Fan
brown
blue
green/yellow
red
yellow
blue
white
Line
1
Line
2
602
Tach
GND
+ -
+
PWM 10 K 12 V Lin/PWM control input 0-10 VDC / PWM yellow 1 F U
Speed setting PWM 1 - 10 kHz 100% PWM -> n=max approx. 10% PWM -> n=min < 10% PWM -> n=0 start up at > 1.4 V
Full speed
Speed setting 1 V - 10 V 10 V -> n=max approx. 1 V -> n=min < 1 V -> n=0 start up at > 1.4 V
Counter Controller
Customer circuit
Line 1 +10 V PE N L Line 2 0-10 V PWM
Connection
Fan
Tach
GND
black
blue
green/yellow
red
yellow
blue
white
Line
1
Line
2
603
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
Mains 50/60 Hz 10 K
+ -
+
PWM 10 K 12 V U
Voltage output +10 V max. 1.1 mA red Lin/PWM input for set value 0-10 VDC / PWM yellow 1 F
Speed setting PWM 1 - 10 kHz 100% PWM -> V=max approx. 17% PWM -> V=min < 15% PWM -> V=0 start up at > 1.4 V
Air flow setting 1 V - 10 V 10 V -> V=max approx. 1.7 V -> V=min < 1.5 V -> V=0 start up at > 1.4 V
Counter Controller
Customer circuit
Line 1 +10 V PE N L Line 2 0-10 V PWM
Connection
Fan
black
blue
green/yellow
red
yellow
blue
white
Line
1
Line
2
604
Tach
GND
+ -
+
PWM 10 K 12 V U
Customer circuit
Line 1 +10 V COM NC PE N L
Connection
Line 2 0-10 V PWM GND
Fan
black
blue
green/yellow white1
white2
red
yellow
blue
Line
1
Line
2
605
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
606
KL3 4-20 mA 0-10 V PWM 0-10 V PWM +20 V +10 V RS B RS B RS A RS A GND GND OUT NO
KL2 COM NC L
KL1 PE N
KL3 4-20 mA 0-10 V PWM 0-10 V PWM +20 V +10 V RS B RS B RS A RS A GND GND OUT NO
KL2 COM NC L1
KL1 PE L2 L3
607
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
EC centrifugal, backward
AC centrifugal, forward
AC centrifugal, backward
General information
608
RS A RS B RS A RS B GND 0-10 V PWM Pressure sensor 4-20 mA +20 V +10 V 0-10 V PWM GND OUT OUT OUT GND GND 0-10 V PWM 0-10 V PWM +10 V +10 V +20 V +20 V 4-20 mA 4-20 mA 0-10 V PWM 0-10 V PWM GND GND RS B RS B RS A RS A RS B RS B
RS A
RS A
Alarm relay
NO
NO
L1
L1
L1
L2
L2
L2
L3
L3
L3
PE
PE
PE
Slave
Mains 50/60 Hz
Slave
Mains 50/60 Hz
Master
Mains 50/60 Hz
609 EC-SYSTEMS EC centrifugal, forward EC centrifugal, backward for clean rooms EC centrifugal, backward AC centrifugal, forward AC centrifugal, backward General information
Contacts
Technology
Accessories
Germany
ebm-papst Mulfingen GmbH & Co. KG Bachmhle 2 D-74673 Mulfingen Phone +49 (0) 79 38 / 81-0 Fax +49 (0) 79 38 / 81-110 info1@de.ebmpapst.com ebm-papst St. Georgen GmbH & Co. KG Hermann-Papst-Strae 1 D-78112 St. Georgen Phone +49 (0) 77 24 / 81-0 Fax +49 (0) 77 24 / 81-13 09 info2@de.ebmpapst.com ebm-papst Landshut GmbH Hofmark-Aich-Strae 25 D-84030 Landshut Phone +49 (0) 8 71 / 707-0 Fax +49 (0) 8 71 / 707-465 info3@de.ebmpapst.com
www.ebmpapst.com
www.ebmpapst.com
www.ebmpapst.com
Contacts
Berlin Dipl.-Ing. (TH) Jens Duchow Hndelstrae 7 D-16341 Panketal Phone +49 (0) 30 / 94 41 49 62 Fax +49 (0) 30 / 94 41 49 63 Jens.Duchow@de.ebmpapst.com Dortmund Dipl.-Ing. (FH) Hans-Joachim Pundt Auf den Steinern 3 D-59519 Mhnesee-Vllinghausen Phone +49 (0) 29 25 / 80 04 07 Fax +49 (0) 29 25 / 80 04 08 Hans-Joachim.Pundt@de.ebmpapst.com Frankfurt Dipl.-Ing. Christian Kleffmann Dr. Hermann-Krause Strae 23 D-63452 Hanau Phone +49 (0) 61 81 / 18 98 12 Fax +49 (0) 61 81 / 18 98 13 Christian.Kleffmann@de.ebmpapst.com Halle Dipl.-Ing. (TU) Michael Hanning Lerchenweg 4 D-06120 Lieskau Phone +49 (0) 3 45 / 5 51 24 56 Fax +49 (0) 3 45 / 5 51 24 57 Michael.Hanning@de.ebmpapst.com Hamburg Ingenieurbro Breuell GmbH Dirk Kahl Elektroingenieur Grtzmhlenweg 40 D-22339 Hamburg Phone +49 (0) 40 / 53 80 92 10 Fax +49 (0) 40 / 53 80 92 84 Dirk.Kahl@de.ebmpapst.com Kassel Dipl.-Ing. (FH) Ralph Brck Hoherainstrae 38 D-35075 Gladenbach Phone +49 (0) 64 62 / 40 71 10 Fax +49 (0) 64 62 / 40 71 11 Ralph.Brueck@de.ebmpapst.com
Koblenz Winfried Schaefer Hinter der Kirch 10 D-56767 Uersfeld Phone +49 (0) 26 57 / 16 96 Fax +49 (0) 26 57 / 16 76 Winfried.Schaefer@de.ebmpapst.com Munich Dipl.-Wirt.-Ing. (FH) Jens Peter Steinbergweg 6 D-82285 Hattenhofen Phone +49 (0) 81 45 / 80 92 25 Fax +49 (0) 81 45 / 80 92 26 Jens.Peter@de.ebmpapst.com Nuremberg Friedrich Klein Adlerstrae 49/1 D-73540 Heubach Phone +49 (0) 71 73 / 49 83 Fax +49 (0) 71 73 / 80 53 Friedrich.Klein@de.ebmpapst.com Offenburg Dipl.-Ing (FH) Ralf Braun Hubeneck 21 D-77704 Oberkirch Phone +49 (0) 78 02 / 98 22 52 Fax +49 (0) 78 02 / 98 22 53 Ralf.Braun@de.ebmpapst.com Stuttgart Dipl.-Ing. (FH) Rudi Weinmann Mhlhaldenweg 13 D-73207 Plochingen Phone +49 (0) 71 53 / 92 89 80 Fax +49 (0) 71 53 / 92 89 81 Rudi.Weinmann@de.ebmpapst.com Ulm Gnter Wilhelm Allguer Strae 7 D-89269 Vhringen Phone +49 (0) 73 06 / 92 46 08 Fax +49 (0) 73 06 / 92 46 48 Guenter.Wilhelm@de.ebmpapst.com
Distributors
Frankfurt R.E.D. Handelsgesellschaft mbH Gutenbergstrae 3 D-63110 Rodgau - Jgesheim Phone +49 (0) 61 06 / 84 10 Fax +49 (0) 61 06 / 84 11 11 info@red-elektromechanik.de www.red-elektromechanik.de Hamburg Breuell + Hilgenfeldt GmbH Grtzmhlenweg 40 D-22339 Hamburg Phone +49 (0) 40 / 53 80 92 20 Fax +49 (0) 40 / 53 80 92 84 info@breuell.de Munich A. Schweiger GmbH Ohmstrae 1 D-82054 Sauerlach Phone +49 (0) 81 04 / 8 97 0 Fax +49 (0) 81 04 / 8 97 90 info@schweiger-gmbh.de www.schweiger-gmbh.com (1 to 5 pieces) North Breuell + Hilgenfeldt GmbH Grtzmhlenweg 40 D-22339 Hamburg Phone +49 (0) 40 / 53 80 92 20 Fax +49 (0) 40 / 53 80 92 84 ebm@breuell.de South HDS Ventilatoren Vertriebs GmbH Glaswiesenstrae 1 D-74677 Drzbach Phone +49 (0) 79 37 / 80 29 68 Fax +49 (0) 79 37 / 80 25 78 info@hds-gmbh.net
610
Belarus ebm-papst Bel AgmbH Prospekt Nesavisimosti 11/2 Zimmer 325, 512 BY-220050 Minsk Phone +375 / 17 / 209 95 61 Fax +375 / 17 / 209 95 61 info@by.ebmpapst.com Belgium VIBO Benelux B. V. Sales office Belgium-Luxembourg Romeinsestraat 6/0101 Research Park Haasrode B-3001 Heverlee-Leuven Phone +32 / 16 / 39 62 00 Fax +32 / 16 / 39 62 20 info@vibobenelux.com www.vibobenelux.com Bulgaria ebm-papst Romania S.R.L. Str. Tirnavei Nr. 20 RO-500327 Brasov Phone +40 / 268 / 312 805 Fax +40 / 268 / 312 805 dudasludovic@xnet.ro Croatia ebm-papst Industries Kft. Mtys u. 1/A H-2220 Vecss Phone +36 / 29 / 55 01 90 Fax +36 / 29 / 55 01 94 office@hu.ebmpapst.com www.ebmpapst.hu Cyprus MATERO LTD 37, St. Kyriakides Avenue P.O. Box 51744 CY-3080 Limassol Phone +357 / 25 / 87 00 30 Fax +357 / 25 / 38 13 66 matero@cytanet.com.cy www.matero.com.cy
Denmark Jenk A/S Vallensbkvej 21 DK-2605 Brndby Phone +45 / 43 / 63 11 11 Fax +45 / 43 / 63 05 05 jenk@jenk.dk www.jenk.dk Estonia ebm-papst Oy Eesti Filiaal Kadaka tee 3 EST-10621 Tallinn Phone +372 / 655 / 6978 Fax +372 / 655 / 6979 Finland ebm-papst Oy Puistotie 1 FIN-02760 Espoo Phone +358 / 9 / 88 70 22 0 Fax +358 / 9 / 88 70 22 13 mailbox@ebmpapst.fi www.ebmpapst.fi France ebm-papst SARL ZI Nord - rue A. Mohler BP 62 F-67212 Obernai-Cedex Phone +33 / 820 326 266 Fax +33 / 3 / 88 67 38 83 info@ebmpapst.fr www.ebmpapst.fr Greece Helcoma Th. Rotas & Co OE Davaki 65 GR-17672 Kallithea-Attiki Phone +30 / 210 / 951 37 05 Fax +30 / 210 / 951 34 90 contact@helcoma.gr www.helcoma.gr
Iceland RJ Engineers Stangarhyl 1A IS-110 Reykjavik Phone +354 / 567 80 30 Fax +354 / 567 80 15 rj@rj.is www.rj.is Ireland ebm-papst Limited Portlaoise Business & Technology Park Mountrath Road IRL-Portlaoise, Co. Laois Phone +353 / 57 86 / 643 43 Fax +353 / 57 86 / 643 46 sales@ie.ebmpapst.com www.ebmpapst.ie Italy ebm-papst Srl Via Cornaggia 108 I-22076 Mozzate (Co) Phone +39 / 03 31 / 83 62 01 Fax +39 / 03 31 / 82 15 10 info@it.ebmpapst.com www.ebmpapst.it Macedonia ebm-papst Industries Kft. Mtys u. 1/A H-2220 Vecss Phone +36 / 29 / 55 01 90 Fax +36 / 29 / 55 01 94 office@hu.ebmpapst.com www.ebmpapst.hu Netherlands VIBO Benelux B. V. Engelseweg 127 Postbus 230 NL-5705 AC Helmond Phone +31 / 4 92 / 50 29 00 Fax +31 / 4 92 / 50 29 50 verkoop@vibobenelux.com www.vibobenelux.com
611
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
Austria ebm-papst Motoren & Ventilatoren GmbH Westbahnstrae 5 A-4490 St. Florian Phone +43 / 72 24 / 66 01 10 Fax +43 / 72 24 / 66 01 120 info@at.ebmpapst.com www.ebmpapst.at
EC centrifugal, backward
Europe
Czech Republic / Slovakia ebm-papst CZ s.r.o. Krtk 379 CZ-66461 Rajhradice u Brna Phone +420 / 5 / 47 23 26 16 Fax +420 / 5 / 47 23 26 22 info@ebmpapst.cz www.ebmpapst.cz
Hungary ebm-papst Industries Kft. Mtys u. 1/A H-2220 Vecss Phone +36 / 29 / 55 01 90 Fax +36 / 29 / 55 01 94 office@hu.ebmpapst.com www.ebmpapst.hu
AC centrifugal, forward
AC centrifugal, backward
General information
Norway ebm-papst AS P.B. 173 Holmlia N-1203 Oslo Phone +47 / 22 / 76 33 40 Fax +47 / 22 / 61 91 73 mailbox@ziehl-ebm.no www.ziehl-ebm.no Poland ebm-papst Polska Sp. z o.o. ul. Annopol 4A PL-03236Warszawa Phone +48 / 22 / 675 78 19 Fax +48 / 22 / 676 95 87 office@ebmpapst.pl www.ebmpapst.pl Portugal ebm-papst (Portugal), Lda Av. Marechal Gomes da Costa, 35 e Rua Conselheiro Emidio Navarro P-1800-255 Lisboa Phone +351 / 21 / 839 48 80 Fax +351 / 21 / 839 47 59 info@pt.ebmpapst.com Romania ebm-papst Romania S.R.L. Str. Tirnavei Nr. 20 RO-500327 Brasov Phone +40 / 268 / 312 805 Fax +40 / 268 / 312 805 dudasludovic@xnet.ro Russia ebm-papst Ural GmbH Rosa Luxembourg Strasse 59 RU-620026 Jekaterinburg Phone +7 / 343 / 378 31 75 Fax +7 / 343 / 378 31 89 Konstantin.Molokov@ru.ebmpapst.com www.ebmpapst.ur.ru
ebm-papst Rus GmbH Nizhegorodskaya 32, str. 15 office 420 RU-109029 Moskau Phone +7 / 495 / 671 53 93 Fax +7 / 495 / 671 53 95 info@ebmpapst.ru www.ebmpapst.ru ebm-papst Rus Saint-Petersburgs Filial Zastavskaya 7 RU-196084 Sankt-Petersburg Phone +7 / 812 / 449 96 07 Fax +7 / 812 / 449 96 07 spb@ru.ebmpapst.com Serbia & Montenegro ebm-papst Industries Kft. Mtys u. 1/A H-2220 Vecss Phone +36 / 29 / 55 01 90 Fax +36 / 29 / 55 01 94 office@hu.ebmpapst.com www.ebmpapst.hu Spain ebm-papst Ibrica S.L. Avda. del Sistema Solar, 29 E-28830 San Fernando de Henares (Madrid) Phone +34 / 91 / 678 08 94 Fax +34 / 91 / 678 15 30 ventas@ebmpapst.es Sweden ebm-papst AB ggelundavgen 2 S-17562 Jrflla Phone +46 / 8 / 761 94 00 Fax +46 / 8 / 36 23 06 info@ebmpapst.se www.ebmpapst.se
Switzerland ebm-papst AG Rtisbergstrae 1 CH-8156 Oberhasli Phone +41 / 44 / 732 20 70 Fax +41 / 44 / 732 20 77 verkauf@ebmpapst.ch www.ebmpapst.ch Turkey Akantel Elektronik San. Tic. LTD. Sti. Atatrk Organize Sanayi Blgesi 10007 SK. No.:6 TR-35620 Cigli-Izmir Phone +90 / 2 32 / 32 82 090 -91 Fax +90 / 2 32 / 32 80 270 akantel@akantel.com.tr www.akantel.com.tr Ukraine ebm-papst Ukraine LLC Lepse Boulevard, 4, Building 47 UA-03067 Kiev Phone +38 / 044 / 206 30 91 Fax +38 / 044 / 206 30 91 mail@ebmpapst.ua www.ebmpapst.ua United Kingdom ebm-papst UK Ltd. Chelmsford Business Park GB-Chelmsford Essex CM2 5EZ Phone +44 / 12 45 / 46 85 55 Fax +44 / 12 45 / 46 63 36 sales@uk.ebmpapst.com www.ebmpapst.co.uk ebm-papst Automotive & Drives (UK) Ltd. The Smithy Fidlers Lane, East Ilsley GB-Berkshire RG20 7LG Phone +44 / 87 07 / 66 51 70 Fax +44 / 87 07 / 66 51 80 A&Dsales@uk.ebmpapst.com www.ebmpapst-ad.com
612
Canada ebm-papst Canada Inc. 1800 Ironstone Manor, Unit 2 CDN-Pickering, Ontario, L1W3J9 Phone +1 / 905 / 420 / 35 33 Fax +1 / 905 / 420 / 37 72 sales@ca.ebmpapst.com www.ebmpapst.ca Mexico ebm Industrial S.de R.L. de C.V. Paseo de Tamarindos 400-A-5to Piso Col. Bosques de las Lomas MEX-Mexico 05120, D.F. Phone +52 / 55 / 50 91 44 44 Fax +52 / 55 / 50 91 44 43 sales@mx.ebmpapst.com www.ebmpapst.com.mx
613
Contacts
Technology
Accessories
EC-SYSTEMS
EC centrifugal, forward
Brasil ebm-papst Motores Ventiladores Ltda. Rua Francisco DAmico, 155 Bairro Pirajussara BR-06785-290 Taboo da Serra-SP Phone +55 /11 / 41 38 50 90 Fax +55 /11 / 41 38 50 86 vendas@br.ebmpapst.com www.ebmpapst.com.br
ebm-papst Automotive & Drives, Inc. 3200 Greenfield, Suite 255 USA-Dearborn, MI 48120 Phone +1 / 313 / 406 80 80 Fax +1 / 313 / 406 80 81 automotive@us.ebmpapst.com www.ebmpapst-automotive.us
Argentinia ebm-papst de Argentina S.A. Hernandarias 148 Lomas del Mirador Pcia. de Buenos Aires (1752) Phone +54 / 11 46 57 61 35 Fax +54 / 11 46 57 20 92 ventas@ar.ebmpapst.com
South Africa ebm-papst South Africa (Pty) Ltd. P.O. Box 3124 1119 Yacht Avenue ZA-2040 Honeydew Phone +27 / 11 / 794 34 34 Fax +27 / 11 / 794 50 20 info@za.ebmpapst.com www.ebmpapst.co.za
EC centrifugal, backward
America
USA ebm-papst Inc. P.O. Box 4009 100 Hyde Road USA-Farmington, CT 06034 Phone +1 / 860 / 674 15 15 Fax +1 / 860 / 674 85 36 sales@us.ebmpapst.com www.ebmpapst.us
Africa
AC centrifugal, forward
AC centrifugal, backward
General information
Asia
China ebm-papst Ventilator (Shanghai) Co., Ltd. No. 418, Huajing Road WaiGaoQiao Free Trade Zone No. 2001, Yang Gao (N) Road VRC-200131 Shanghai, P.R. of China Phone +86 / 21 / 50 46 01 83 Fax +86 / 21 / 50 46 11 19 sales@cn.ebmpapst.com Hong Kong ebm-papst Ventilator (Shanghai) Co., Ltd. Hong Kong Representative Office Unit Nos. 13, 9/F, Technology Park 18 On Lai Street, Sha Tin, N.T. HK-Hong Kong P.R. of China Phone +852 / 21 45 / 86 78 Fax +852 / 21 45 / 76 78 chenghong@cn.ebmpapst.com India ebm NADI International Pvt Ltd. 26/3, G.N.T. Road, Erukkencherry IND-Chennai-600118 Phone +91 / 44 / 25 37 25 56 Fax +91 / 44 / 25 37 11 49 ebmnadi@md2.vsnl.net.in www.ebmnadi.com Indonesia ebm-papst Indonesia Representative Office Jalan Puri Kencana, Blok K7/3T RI-Jakarta 11610 Phone +62 / 21 / 582 / 31 18 Fax +62 / 21 / 582 / 31 17 sonny.sanjaya@id.ebmpapst.com Israel Polak Bros. Import Agencies Ltd. 9 Hamefalsim Street IL-Kiryat Arie, Petach-Tikva 49514 Phone +972 / 3 / 910 03 00 Fax +972 / 3 / 579 66 79 polak@polak.co.il
Japan ebm-papst Industries Japan K.K. 12 Floor, Benex S-3 Bldg. 3-20-8 Shinyokohama, Kohoku-ku J-222-0033 Yokohama Phone +81 / 45 / 470 / 57 51 Fax +81 / 45 / 470 / 57 52 info@jp.ebmpapst.com www.ebmpapst.jp Korea ebm-papst Korea Co. Ltd. 6F, Trutec Bldg. B 6-2, Digital Media City (DMC) Sangam-Dong, Mapo-Gu ROK-Seoul 121-270 Phone +82 / 2 / 36 62 / 13 24 Fax +82 / 2 / 36 62 / 13 26 info@kr.ebmpapst.com www.ebmpapst.co.kr Malaysia ebm-papst Malaysia Representative Office Block F1, 9A-4, Jalan PJU 1/42 Dataran Prima MAL-47301 Petaling Jaya Phone +60 / 3 / 78 06 54 40 Fax +60 / 3 / 78 06 54 41 john.bulder@my.ebmpapst.com Singapore ebm-papst SEA Pte. Ltd. 23 Ubi Road 4, #05-00 Olympia Industrial Building SGP-Singapore 408620 Phone +65 / 68 42 84 38 Fax +65 / 68 42 84 39 salesdept@sg.ebmpapst.com Taiwan ETECO Engineering & Trading Corp. 10F-I, No. 92, Teh-Wei Str. RC-Tsow-Inn District, Kaohsiung Phone +886 / 7 / 557 42 68 Fax +886 / 7 / 557 27 88 eteco@ms22.hinet.net
Thailand ebm-papst Thailand Co. Ltd. Representative Office 99/349 Chaeng Wattana Road, Laksi Bangkok 10210, Thailand Phone +66 / 2 / 576 / 15 24-5 Fax +66 / 2 / 576 / 15 42 salesdept@th.ebmpapst.com United Arab Emirates ebm-papst Middle East FZE PO Box 17755 Jebel Ali Free Zone / FZS1 / AP05 UAE-Dubai Phone +971 / 4 / 886 08 26 Fax +971 / 4 / 886 08 27 info@ae.ebmpapst.com
614
Australia
Australia ebm-papst Australia Pty Ltd. 2 Silverton Close AUS-Laverton North, Victoria, 3026 Phone +61 / 3 / 83 25 64 00 Fax +61 / 3 / 83 25 64 64 sales@ebmpapst.com.au www.ebmpapst.com.au New Zealand ebm-papst Australia Pty Ltd. 102 Henderson Valley Road NZ-Henderson, Auckland 1230 Phone +64 / 9 / 837 18 84 Fax +64 / 9 / 837 18 99 sales@ebmpapst.com.au www.ebmpapst.com.au
615
ebm-papst Mulfingen GmbH & Co. KG Bachmhle 2 D-74673 Mulfingen Phone +49 (0) 7938 / 81-0 Fax +49 (0) 7938 / 81-110 info1@de.ebmpapst.com
ebm-papst St.Georgen GmbH & Co. KG Hermann-Papst-Strae 1 D-78112 St.Georgen Phone +49 (0) 7724 / 81-0 Fax +49 (0) 7724 / 81-1309 info2@de.ebmpapst.com
ebm-papst Landshut GmbH Hofmark-Aich-Strae 25 D-84030 Landshut Phone +49 (0) 871/ 707-0 Fax +49 (0) 871 / 707-465 info3@de.ebmpapst.com
www.ebmpapst.com