Академический Документы
Профессиональный Документы
Культура Документы
The IHC Beaver is well known for its robust construction, reliable operation and excellent performance. To date, IHC Holland have supplied more than 600 of these standard cutter suction dredgers. The current range of standard, demountable cutter suction dredgers consists of basic models, with power outputs ranging from 300 to 1,600 horse power. The IHC Beaver 600 is just one type from this range. The hull consists of three pontoons, one main pontoon housing the engine room, and two side pontoons. All parts are dimensioned to allow the IHC Beaver to be transported by road, rail or sea. The dredger is equipped with a rapid connectiondisconnection system for the pontoons, achieved using bolts at deck level, and hooks at the bottom. Further salient features of the vessel are the compact dredge pump drive incorporating a reduction gear with integrated pump bearing and a fresh water engine cooling system, based on the well cooling principle.
Various components are mounted in or on the main pontoon, including the cutter ladder, the two ladder actuator rams, control cabin, dredge pump, diesel engines and auxiliary power units, discharge line and the spuds with their actuator rams. The cutter and swing winches, mounted on the ladder, are powered by piston-type hydraulic motors.
PU 25C
Winches
(ladder winch / swing winches) - Line pull, 1st layer : 40 / 40 kN - Max. line speed approx. : 25 / 25 m/min - Wire diameter : 16 / 16 mm - Drum diameter : 320 / 320 mm - All winches have independent hydraulic drive - The two swing winches are supplied with wires of 100m and anchors of 240kg
Spuds
- Length (approx.) - Diameter - Weight (approx.) : : : : : : : : : : 11 m 368 mm 1,360 kg 60 kN 1.80 m 3.00 m 18.00 m 22.50 m 15 kN 2.20 m
Principal particulars
- Length overall, ladder raised - Length over pontoons - Breadth - Depth - Main pontoon: 8.00 x 2.70 x 1.80m - Side pontoons: 12.00 x 1.47 x 1.47m - Mean draught with full bunkers approx. - Maximum standard dredging depth - Internal diameter of suction and discharge pipes - Total dry weight approx. : : : : 20.10 12.50 5.72 1.51 m m m m
Deck crane
- Lifting power - Outreach
Dredge pump
390 kW (530 hp) - Dredge pump driven via combined pump block/reduction gearbox - Type IHC-900-175-350 - Power at shaft :
Tools
- Special tools are supplied for connecting and disconnecting pontoons and cutter ladder, and for maintenance of dredgepump and diesel engine
Optional equipment
- Anchor booms (plus enlarged side pontoons) - Wedge piece for very small min. dredging depth - Spud carriage - Increased dredging depth - Swivel bend - Non-return valve - Valve in discharge line - Production measuring equipment - Air conditioning
Engine installation
- Diesel engine: Caterpillar 3412 E developing 485kW (660hp) continuous power at 1,800rev/min. Specific fuel consumption 214g/kWhr
Electrical installation
- Voltage - Capacity : : 24 V 200 Ah
Cutter
- Type IHC 955-50, 5-bladed with serrated edges - Power at shaft : - Diameter - Maximum speed : : 52 kW (70 hp) 955 mm 34 rev/min
400
- internal diameter of discharge line 400mm - maximum standard dredging depth - maximum volumetric concentration of in-situ solids of 20% - final elevation at end of pipeline 4m
Output calculated for: Soil type A - fine sand B - medium sand C - coarse sand D - coarse sand/gravel E - gravel
300
200 A E 0 0 1000 2000 3000 4000 5000 6000 Pipeline length in meters D C B
100
IHC Holland reserves the right to amend dimensional or other data given in this publication without prior notice