Академический Документы
Профессиональный Документы
Культура Документы
Preferred Device
Ultrafast 25 Nanosecond Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction
http://onsemi.com
Mechanical Characteristics
Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Lead and Mounting Surface Temperature for Soldering Purposes:
Leads are Readily Solderable 220C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 1000 per bag Available Tape and Reeled, 5000 per reel, by adding a RL suffix to the part number Polarity: Cathode Indicated by Polarity Band Marking: MUR220
AXIAL LEAD CASE 059-10 PLASTIC
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Note 1) (Square Wave Mounting Method #3 Per Note 1) Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Operating Junction Temperature and Storage Temperature Range Symbol VRRM VRWM VR IF(AV) Value 200 2.0 @ TA = 90C 35 Unit Volts
MARKING DIAGRAM
MUR 220 MUR220 = Device Code
Amps
IFSM
Amps
ORDERING INFORMATION
- 65 to +175 C Device MUR220 MUR220RL Package Axial Lead Axial Lead Shipping 1000 Units/Bag 5000/Tape & Reel
TJ, Tstg
Preferred devices are recommended choices for future use and best overall value.
MUR220
THERMAL CHARACTERISTICS
Characteristic Maximum Thermal Resistance, Junction to Ambient Symbol RqJA Value See Note 1 Unit C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 2) (IF = 2.0 Amp, TJ = 150C) (IF = 2.0 Amp, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) (IF = 0.5 Amp, IR = 1.0 Amp, IREC = 0.25 A) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. 10 10 vF 0.75 0.95 iR 50 2.0 trr 35 25 tfr 25 ns ns mA Volts
VF @ 150C 1.0
VF @ 150C
1.0
125C 75C 25C 0.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 VF, INSTANTANEOUS VOLTAGE (VOLTS) 0.1 0.4 0.5 0.6 0.7
http://onsemi.com
2
MUR220
100 IR @ 150C IR, REVERSE CURRENT (m A) 10 125C 75C 1.0 25C 0.1 IR, REVERSE CURRENT (m A) 1.0 75C 0.1 25C 0.01 10 IR @ 150C 125C
0.01 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS)
0.001 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS)
5.0
4.0
1.0
2.0
1.0 0
0.5
50
100
150
200
0 0 0.5 1.0 1.5 2.0 2.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS)
http://onsemi.com
3
MUR220
NOTE 1. - AMBIENT MOUNTING DATA
Data shown for thermal resistance junction to ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L 1/8 1/4 1/2 52 65 72 67 80 87 50 Units C/W C/W C/W
MOUNTING METHOD 1
L L
MOUNTING METHOD 2
L L
http://onsemi.com
4
MUR220
PACKAGE DIMENSIONS
K F
A F K
http://onsemi.com
5
MUR220
http://onsemi.com
6
MUR220/D