Академический Документы
Профессиональный Документы
Культура Документы
Technical Bulletin
Modality: IV;CT;MR;NM;UL;VL;XR Product Series: PC-Based Aquilion, Vantage, Infinix-i, t.cam, Xario, Aplio Document ID: TB-IV-10016 Priority : Information Only
System: PC- Based Aquilion, Vantage, Infinix-i, t.cam, Xario, Aplio Author : Ernie Sierra Subject :
Testing the Toshiba VPN Router before changing IPs on TAMS equipment
Suggestion: Its good practice to test the Toshiba VPN router first using your laptop,
before you change the IP address, subnet mask and default gateway on the any Toshiba equipment. This procedure will use CT as an example. Perform the following on your laptop: 1. Change the IP address, subnet mask and default gateway on your laptop to the IP address of the Scan console or Display console. The IP addresses are listed on the Toshiba VPN Router Installation Sheet (The paper that is in the Toshiba VPN Router box.) a. From the Desktop, right click on the My Network Places icon. b. Then select Properties c. At the Network Connections screen, right click Local Area Connection, the select Properties. d. At the Local Area Connection screen click on Internet Protocol (TCP/IP) the click on Properties. e. Select Use the following IP address. Change to the following: i. IP address: 172.17.X.Y (IP address of the scan console) ii. Subnet mask: 255.255.255.240 iii. Default gateway: 172.17.X.Y (IP address of the Toshiba VPN Router) f. Click on <OK> g. Click on <Close> to exit the Local Area Connection properties. h. Exit the Network Connections screen by click on the <X> in the top right corner.
Ernie Sierra
2/6/2006
Ernie Sierra
2/6/2006