Академический Документы
Профессиональный Документы
Культура Документы
ALUMINUM
C OLONIAL
2/2
Vent Removable From Interior For Ease Of Cleaning - No Tools Required. Concealed Block And Tackle (Spring And Pulley) Balances: No Adjustment Required. Delrin Spring-Loaded Lock Placed At Bottom Of Vent Closes Securely Onto Window Sill. Integrally Extruded Continuous Lift Bar On Bottom Of Vent For Easy Open/Close. Vertical Weatherstrip On Interior And Exterior Verticals Of Vent Provides Maximum Weatherability. Drop-In Screen For Effortless Installation.
Metal finishes, glass and other options: on request Specifications & engineering details: on request Our products are Dade County approved: code compliance on request
671 West 18th Street, Hialeah, Florida 33010-2480 Ph: (305)887-2646 Fax: (305) 883-1309
The Premiere
ALUMINUM
single hungwindow
Return Home
1/1
O RIOLE
A RT D ECO I
C APE C OD
A RT D ECO II B ARCELONA
671 West 18th Street, Hialeah, Florida 33010-2480 Ph: (305)887-2646 Fax: (305) 883-1309
The Premiere
ALUMINUM
single hungwindow
Return Home
STANDARD MUNTINS
2/2
APPLIED MUNTINS
671 West 18th Street, Hialeah, Florida 33010-2480 Ph: (305)887-2646 Fax: (305) 883-1309
The Premiere
ALUMINUM
W.D.
EXTERIOR
W.D.
SERIES 500
SCHEDULES OF SIZES
SERIES 500 FLANGE TYPE
19 1/8 26 1/2 37 53 1/8 WIDTH HEIGHT 26
SH-12 SH-1/2 32 SH-22 SH-32
PICTURE WINDOW
38 3/8
SH-13
SH-1/2 33
SH-23
SH-33
50 5/8
W.D.
EXTERIOR
W.D.
SERIES 500
INTERIOR
SH-14
SH-1/2 34
SH-24
SH-34
63
PICTURE WINDOW
SINGLE HUNG
SERIES 500 S.H. & INSIDE GLAZED P.W. WIGH YE 164 MULLION
1/2
SH-15
SH-1/2 35
SH-25
SH-35
74 1/4
2 5/8 1 3/16
SH-16
SH-1/2 36
SH-26
SH-36
W.D.
EXTERIOR
W.D.
32
36
40
44
WIDTH
44
WINDOW DIMENSION
2038
2838
3038
3438
3838
52
INTERIOR
NOT TO SCALE
2044
2844
3044
3444
3844
60
NO MULL REQUIRED INTERLOCKING JAMBS
2050
2850
3050
3450
3850
1
671 West 18th Street, Hialeah, Florida 33010-2480 Ph: (305)887-2646 Fax: (305) 883-1309
2060
2860
3060
3460
3860
The Premiere
ALUMINUM
single hungwindow
Return Home
SPECIFICATIONS
Series 500 Flange Type - DH-R40 Series 507 Integral Fin - DH-R40 GENERAL: Windows shall be single hung design as manufactured by the Yale Ogron Mfg. Co., Inc., of Hialeah, Florida, U.S.A. certified to meet DH-R40 specifications of the American Architectural Aluminum Manufacturers Association (A.A.M.A.). MATERIALS: All frames and sash members shall be extruded 6063-T5 aluminum alloy. Frame members shall have
a minimum depth of 2 3/16 on Series #500 flange, and 2 9/16 on Series #507 fin, with wall of .062. Sash members shall have a minimum depth of 1 and walls of .062,
CONSTRUCTION: Windows shall be coped at the corners and assembled with screws for tight union. Weatherstrip grooves shall be provided at the sash interlock and sill and jambs of sash. HARDWARE & OPERATION: Sash operates on concealed spring and pulley balances. Sash may be removed from interior for access and cleaning of upper fixed lites. The sash lower rail contains an integrally extruded continuous loft bar. Locking hardware shall be delrin plastic spring-loaded catches located at the sash and frame sill. Sash over 3 - 0 in width to contain (2) catches. All hardware easily removable before and after installation.
Interior and exterior of sash vertical members contain wool pile which form a continuous seal with elastomeric vinyl located at the sash sill and interlock profile.
WEATHERSTRIPPING:
FINISH: Windows shall be manufactured with standard mill finish. Other finishes available when specified. INSECT SCREENS: half screens shall be included when specified. Full screens can be provided for use with the
Series #507 fin window when specified. Screen frame shall be of rolled aluminum box profile. Mesh fabric shall be 18-16. Spline is circular profiled plastic. All screens shall be mill finish unless specified.
ERECTION & CAULKING: Windows shall be erected by erecting contractor. Windows shall be erected plumb,
level, and true. Windows shall not be distorted by erection screws or fittings, and screws shall not interfere with operating mechanism of the window.
GLAZING: Windows shall be factory glazed with aluminum snap-on bead only when so specified. CLEANING: All exposed portions of the window shall be cleaned by others (with mild detergent in warm water
on exposed surfaces) after construction work and painting has been completed.