Академический Документы
Профессиональный Документы
Культура Документы
1995-2009 SolidCAM
WW W. S O L I D C A M . C O M
Contents
Contents
1. SolidCAM Basics
1.1 Installing the SolidCAM Software..................................................................................................... 24 1.1.1 System requirements. ................................................................................................................. 24 1.1.2 Supported CAD systems.......................................................................................................... 24 1.1.3 SolidCAM Single License installation..................................................................................... 25 1.1.4 SolidCAM Network License Installation............................................................................... 29 1.2 Basic Concepts...................................................................................................................................... 31 1.3 Starting SolidCAM............................................................................................................................... 31 1.4 SolidCAM Interface............................................................................................................................. 32 1.4.1 SolidCAM Manager................................................................................................................... 32 1.4.2 Coordinate System..................................................................................................................... 35 1.5 Getting Help. ......................................................................................................................................... 36
2. CAM-Part
2.1 Starting a new Milling CAM-Part....................................................................................................... 38 2.1.1 New Milling Part dialog box.................................................................................................... 39 2.1.2 The structure of the CAM-Part.............................................................................................. 40 2.1.3 Milling Part Data dialog box.................................................................................................... 40 2.2 Coordinate System. ............................................................................................................................... 41 2.2.1 Defining the Coordinate System (CoordSys)........................................................................ 41 2.2.2 CoordSys dialog box.................................................................................................................. 42 2.2.3 Defining the Coordinate Systems for 3-axis CNC-machine............................................... 48 2.2.4 Defining the Coordinate Systems for 4-axis CNC-machine............................................... 49 2.2.5 Defining the Coordinate Systems for 5-axis CNC-machine............................................... 50 2.2.6 Coordinate System definition methods.................................................................................. 51 2.2.7 CoordSys Data dialog box........................................................................................................ 52
5
2.2.8 SolidCAM Coordinate System................................................................................................. 54 2.3 CoordSys Manager............................................................................................................................... 55 2.4 Stock and Target Model. ...................................................................................................................... 57 2.4.1 Stock model................................................................................................................................ 58 2.4.2 Target model............................................................................................................................... 60 2.4.3 Common controls for Stock model and Target model dialog boxes................................. 60 2.4.4 Associativity of Stock and Target models. ............................................................................. 61 2.5 Tool Options......................................................................................................................................... 63 2.6 Mac Options.......................................................................................................................................... 65 2.7 Work Material........................................................................................................................................ 65 2.8 CNC-Controller and Axis Type. ......................................................................................................... 66 2.8.1 Axis type...................................................................................................................................... 66 2.9 Default GCode numbers..................................................................................................................... 68 2.10 Part Settings. ........................................................................................................................................ 70 2.10.1 Units. .......................................................................................................................................... 70 2.10.2 Interoperational tool movements.......................................................................................... 71 2.10.3 Update Stock calculation........................................................................................................ 72 2.10.4 Synchronization. ....................................................................................................................... 75 2.10.5 Automatic CAM-Part definition. .......................................................................................... 76 2.10.6 Machining Process................................................................................................................... 78 2.10.7 Tool path simulation. ............................................................................................................... 79 2.10.8 GCode generation. ................................................................................................................... 80 2.10.9 Template defaults..................................................................................................................... 84 2.10.10 Tool coolant. ........................................................................................................................... 86 2.10.11 Gouge check........................................................................................................................... 86 2.11 Compressed CAM-Part..................................................................................................................... 87 2.11.1 Compressed CAM-Part file format...................................................................................... 87 2.11.2 Creating a new compressed CAM-Part................................................................................ 87 2.11.3 Converting CAM-Parts to Compressed mode.................................................................... 88 2.11.4 Opening/Closing Compressed CAM-Parts. ........................................................................ 88
6
Contents
2.12 Managing CAM-Parts........................................................................................................................ 90 2.13 CAM-Part Documentation............................................................................................................... 97 2.13.1 Documentation Editor. ........................................................................................................... 97 2.14 Tool sheet documentation. ................................................................................................................ 99 2.14.1 Capturing the CAM-Part image............................................................................................. 99 2.14.2 Definition of tool sheet parameters................................................................................... 100 2.14.3 The output file....................................................................................................................... 103 2.14.4 Show Last Tool Sheet. ........................................................................................................... 107 2.15 Milling STL CAM-Part.................................................................................................................... 108 2.15.1 Starting a new Milling-STL CAM-Part............................................................................... 108 2.15.2 Coordinate System definition.............................................................................................. 110 2.15.3 Stock model definition.......................................................................................................... 111 2.15.4 Target model definition........................................................................................................ 111 2.16 Support of DriveWorks. .................................................................................................................. 112
3. Tools
3.1 User-Defined Tool Types.................................................................................................................. 116 3.1.1 End mill..................................................................................................................................... 117 3.1.2 Ball nose mill............................................................................................................................ 118 3.1.3 Bull nose mill............................................................................................................................ 119 3.1.4 Dove tail mill............................................................................................................................ 120 3.1.5 Face mill. .................................................................................................................................... 121 3.1.6 Slot mill...................................................................................................................................... 122 3.1.7 Taper mill.................................................................................................................................. 123 3.1.8 Engraving tool.......................................................................................................................... 125 3.1.9 Tap tool..................................................................................................................................... 126 3.1.10 Lollipop mill........................................................................................................................... 127 3.1.11 Thread mill. ............................................................................................................................. 129 3.1.12 Thread taper........................................................................................................................... 131 3.1.13 Drill.......................................................................................................................................... 131
7
3.1.14 Center drill.............................................................................................................................. 132 3.1.15 Spot drill.................................................................................................................................. 134 3.1.16 Chamfer drill. .......................................................................................................................... 135 3.1.17 Reamer..................................................................................................................................... 136 3.1.18 Bore.......................................................................................................................................... 137 3.1.19 Shaped Tools.......................................................................................................................... 138 3.1.20 Add new tool types................................................................................................................ 138 3.1.21 Tool type options................................................................................................................... 139 3.2 Tool Libraries...................................................................................................................................... 140 3.3 Working with the Part Tool Table.................................................................................................... 141 3.4 Working with the Current Tool Library.......................................................................................... 142 3.5 Managing Tool Libraries.................................................................................................................... 143 3.5.1 Edit Tool Library..................................................................................................................... 143 3.5.2 Create Tool Library. ................................................................................................................. 143 3.5.3 Copy Tool Library. ................................................................................................................... 144 3.5.4 Delete Tool Library................................................................................................................. 145 3.6 Tool Table dialog box........................................................................................................................ 146 3.6.1 Tools Filter................................................................................................................................ 146 3.6.2 Tool range................................................................................................................................. 147 3.6.3 Show. .......................................................................................................................................... 148 3.6.4 View........................................................................................................................................... 149 3.6.5 Edit............................................................................................................................................. 149 3.7 Managing tools.................................................................................................................................... 152 3.8 Tool data.............................................................................................................................................. 156 3.8.1 Tool Topology page................................................................................................................. 157 3.8.2 Default Tool Data page. .......................................................................................................... 161 3.8.3 Tool Message page................................................................................................................... 164 3.8.4 Holder page. .............................................................................................................................. 165 3.8.5 Tool Coolant page. ................................................................................................................... 166 3.8.6 Shape page................................................................................................................................ 167
8
Contents
3.9 Tool Holding system.......................................................................................................................... 169 3.9.1 Tool Holders dialog box......................................................................................................... 169 3.9.2 Tool Holder Geometry definition......................................................................................... 173 3.9.3 Tool Holder segments............................................................................................................. 173 3.9.4 Using Tool Holders................................................................................................................. 175 3.10 Shaped Tools..................................................................................................................................... 177 3.10.1 Shaped Tools dialog box....................................................................................................... 177 3.10.2 Shaped tool geometry definition......................................................................................... 180 3.10.3 Shaped Tool segments. .......................................................................................................... 180 3.10.4 Using Shaped tools................................................................................................................ 182 3.11 Feed and Speed defaults.................................................................................................................. 184
4. Geometry
4.1 Introduction........................................................................................................................................ 188 4.2 Drilling geometry. ............................................................................................................................... 189 4.2.1 Defining a Drilling geometry................................................................................................. 189 4.2.2 Editing a Drilling geometry.................................................................................................... 190 4.2.3 Drill Geometry Selection dialog box.................................................................................... 190 4.2.4 Around 4th Axis Drill Geometry Selection dialog box..................................................... 194 4.3 3D Model geometry........................................................................................................................... 197 4.3.1 Defining a 3D Model geometry............................................................................................ 197 4.3.2 Editing a 3D Model geometry............................................................................................... 198 4.4 Wireframe geometry.......................................................................................................................... 199 4.4.1 Defining the Profile/Pocket geometry................................................................................. 199 4.4.2 Defining the Working Area.................................................................................................... 200 4.4.3 Defining the Slot geometry.................................................................................................... 200 4.4.4 Defining the Section geometry.............................................................................................. 201 4.4.5 Defining the Limit geometry................................................................................................. 202 4.5 Editing chain geometries................................................................................................................... 203
4.5.1 Geometry Name...................................................................................................................... 203 4.5.2 Configurations.......................................................................................................................... 203 4.5.3 Adding a Chain......................................................................................................................... 203 4.5.4 Managing chains....................................................................................................................... 204 4.5.5 Chain direction......................................................................................................................... 205 4.5.6 Selecting single entities............................................................................................................ 205 4.5.7 Automatic selection................................................................................................................. 209 4.5.8 Chain buttons........................................................................................................................... 211 4.5.9 Options...................................................................................................................................... 212 4.5.10 Gap control. ............................................................................................................................ 212 4.5.11 Add Multi-Chain.................................................................................................................... 213 4.5.12 Mark Open Edges dialog box.............................................................................................. 213 4.6 Chains Selection dialog box.............................................................................................................. 215 4.6.1 Chains Direction dialog box. .................................................................................................. 217 4.6.2 Chain sorting............................................................................................................................ 218 4.7 Managing geometries......................................................................................................................... 220 4.7.1 Synchronization of the Wireframe geometry. ..................................................................... 221 4.7.2 Synchronization of the 3D Model geometry...................................................................... 224 4.7.3 Boolean operations.................................................................................................................. 226
5. Operations
5.1 Adding an operation. .......................................................................................................................... 230 5.2 SolidCAM Operation Interface........................................................................................................ 231 5.2.1 Operation name....................................................................................................................... 233 5.2.2 Template.................................................................................................................................... 235 5.2.3 Info. ............................................................................................................................................ 245 5.2.4 Operation buttons. ................................................................................................................... 245 5.2.5 Calculator.................................................................................................................................. 247 5.2.6 Geometry page......................................................................................................................... 250 5.2.7 Tool page................................................................................................................................... 252 5.2.8 Levels page................................................................................................................................ 257
10
Contents
5.2.9 Technology page...................................................................................................................... 264 5.2.10 Advanced Technology page................................................................................................. 264 5.2.11 Link page................................................................................................................................. 272 5.2.12 Miscellaneous parameters page. ........................................................................................... 272 5.3 Working with operations................................................................................................................... 275 5.3.1 Add Operation......................................................................................................................... 275 5.3.2 Add Operation from Template.............................................................................................. 276 5.3.3 Add Operations from Process Template............................................................................. 276 5.3.4 Add Machining Process.......................................................................................................... 277 5.3.5 Create Template....................................................................................................................... 277 5.3.6 Edit............................................................................................................................................. 277 5.3.7 Calculate/Calculate All. ........................................................................................................... 277 5.3.8 GCode/GCode All.................................................................................................................. 277 5.3.9 Calculate & GCode All........................................................................................................... 278 5.3.10 Tool Sheet............................................................................................................................... 278 5.3.11 Simulate................................................................................................................................... 278 5.3.12 File............................................................................................................................................ 278 5.3.13 Operation Group................................................................................................................... 278 5.3.14 Cut/Copy/Paste. .................................................................................................................... 279 5.3.15 Rename.................................................................................................................................... 279 5.3.16 Change tool. ............................................................................................................................ 280 5.3.17 Change tool data.................................................................................................................... 280 5.3.18 Info. .......................................................................................................................................... 281 5.3.19 Delete/Delete All.................................................................................................................. 281 5.3.20 Suppress/Unsuppress........................................................................................................... 281 5.4 Managing Operations in the SolidCAM Manager tree................................................................. 284 5.4.1 Operation Sequence................................................................................................................ 284 5.4.2 Undo Sequence........................................................................................................................ 284 5.4.3 Split............................................................................................................................................ 284 5.4.4 Expand tree............................................................................................................................... 286 5.4.5 Collapse tree. ............................................................................................................................. 286
11
5.4.6 Show/Hide Tools in tree........................................................................................................ 286 5.4.7 Show/Hide CoordSys in tree................................................................................................. 287 5.4.8 Automatic Sort......................................................................................................................... 288 5.5 Operation Transformations.............................................................................................................. 290 5.5.1 Operation transformations..................................................................................................... 291 5.5.2 Options...................................................................................................................................... 292 5.5.3 Transformations table............................................................................................................. 292 5.5.4 Transformation buttons.......................................................................................................... 293 5.6 Fixture.................................................................................................................................................. 298 5.6.1 Fixture dialog box.................................................................................................................... 299
6. 2.5D Milling
6.1 Profile Operation. .............................................................................................................................. 302 6.1.1 Levels page................................................................................................................................ 303 6.1.2 Technology page...................................................................................................................... 303 6.1.3 Link page................................................................................................................................... 326 6.2 Face Milling Operation...................................................................................................................... 335 6.2.1 Geometry page......................................................................................................................... 335 6.2.2 Technology page...................................................................................................................... 338 6.2.3 Link page................................................................................................................................... 349 6.3 Contour 3D Operation...................................................................................................................... 351 6.3.1 Technology page...................................................................................................................... 351 6.3.2 Link page................................................................................................................................... 355 6.4 Pocket Operation................................................................................................................................ 357 6.4.1 Geometry page......................................................................................................................... 358 6.4.2 Levels page................................................................................................................................ 359 6.4.3 Technology page...................................................................................................................... 360 6.4.4 Link page................................................................................................................................... 381 6.5 Pocket Recognition Operation......................................................................................................... 397 6.5.1 Geometry page......................................................................................................................... 397
12
Contents
6.5.2 Levels page................................................................................................................................ 403 6.5.3 Technology page...................................................................................................................... 404 6.5.4 Link page................................................................................................................................... 408 6.6 Drilling Operation.............................................................................................................................. 409 6.6.1 Tool page................................................................................................................................... 409 6.6.2 Levels page................................................................................................................................ 411 6.6.3 Technology page...................................................................................................................... 412 6.7 Drill Recognition Operation............................................................................................................. 437 6.7.1 Geometry page......................................................................................................................... 437 6.7.2 Levels page................................................................................................................................ 442 6.7.3 Technology page...................................................................................................................... 446 6.8 Thread Milling Operation................................................................................................................. 447 6.8.1 Tool page................................................................................................................................... 447 6.8.2 Levels page................................................................................................................................ 448 6.8.3 Technology page...................................................................................................................... 449 6.8.4 Link page................................................................................................................................... 452 6.9 Slot Operation..................................................................................................................................... 453 6.9.1 Technology page...................................................................................................................... 454 6.9.2 Pre-drilling geometry generation........................................................................................... 461 6.10 T-Slot Operation. .............................................................................................................................. 463 6.10.1 Tool page................................................................................................................................. 464 6.10.2 Technology page.................................................................................................................... 465 6.10.3 Link page................................................................................................................................. 470 6.11 Translated Surface Operation......................................................................................................... 471 6.11.1 Technology page.................................................................................................................... 471 6.11.2 Link page................................................................................................................................. 482
7. 3D Milling
7.1 3D Milling Operation. ........................................................................................................................ 484 7.1.1 Geometry page......................................................................................................................... 484
13
7.1.2 Technology page...................................................................................................................... 497 7.1.3 Roughing................................................................................................................................... 498 7.1.4 Hatch roughing. ........................................................................................................................ 513 7.1.5 Contour roughing.................................................................................................................... 513 7.1.6 Plunging pattern....................................................................................................................... 513 7.1.7 Semi-Finish/Finish.................................................................................................................. 514 7.1.8 Semi-Finish/Finish strategies. ................................................................................................ 520 7.1.9 Linear Finish strategy.............................................................................................................. 520 7.1.10 Offset Cutting Finish strategy............................................................................................. 524 7.1.11 Spiral finish strategy.............................................................................................................. 527 7.1.12 Circular Pocket finish strategy............................................................................................. 531 7.1.13 Constant Z Finish Strategy. .................................................................................................. 533 7.1.14 Constant Step over strategy................................................................................................. 540 7.1.15 Pencil milling.......................................................................................................................... 545 7.1.16 Tolerance page. ....................................................................................................................... 549 7.2 3D Engraving Operation.................................................................................................................. 551 7.2.1 Technology page...................................................................................................................... 551 7.2.2 Tolerance page.......................................................................................................................... 554 7.3 3D Drilling Operation....................................................................................................................... 555 7.3.1 Geometry page......................................................................................................................... 555 7.3.2 Tool page................................................................................................................................... 556 7.3.3 Levels page................................................................................................................................ 557 7.3.4 Technology page...................................................................................................................... 557
8. Machining Processes
8.1 Introduction & Basic concepts. ........................................................................................................ 560 8.1.1 Operation templates................................................................................................................ 560 8.1.2 Parameters & Expressions...................................................................................................... 561 8.1.3 Default sets............................................................................................................................... 562 8.1.4 Machining Process Table........................................................................................................ 562 8.2 Creating Machining Processes.......................................................................................................... 563
14
Contents
8.3 Defining Machining Process Table.................................................................................................. 564 8.3.1 Adding MAC file(s)................................................................................................................. 564 8.4 Machining Process Table Manager.................................................................................................. 566 8.4.1 Managing Machining Process Tables.................................................................................... 567 8.4.2 Machining Process Group Types. .......................................................................................... 569 8.5 Managing Machining Processes. ....................................................................................................... 571 8.6 Machining Process Define Manager. .............................................................................................. 572 8.6.1 Operation Templates page. ..................................................................................................... 572 8.6.2 Define Operation Template................................................................................................... 572 8.6.3 Managing Operation Templates............................................................................................ 573 8.6.4 Parametric field menu............................................................................................................. 575 8.6.5 Default Sets page..................................................................................................................... 576 8.6.6 Parameters & Expressions Tables......................................................................................... 577 8.6.7 Add new parameter................................................................................................................. 579 8.6.8 Variables and expressions....................................................................................................... 579 8.6.9 Parametric tool definition....................................................................................................... 584 8.7 Using the Machining Processes........................................................................................................ 586 8.8 Inserting the Machining Process...................................................................................................... 587 8.8.1 Choosing the tool. .................................................................................................................... 589 8.9 Machining Process Insert Manager. ................................................................................................. 590 8.9.1 Operation Templates Page..................................................................................................... 590 8.9.2 Default Sets Page..................................................................................................................... 591 8.9.3 Parameters Table...................................................................................................................... 592 8.9.4 Operation Points...................................................................................................................... 592 8.9.5 Parameters definition.............................................................................................................. 592
15
9.2.1 Definition of Coordinate Systems........................................................................................ 598 9.2.2 Target model............................................................................................................................. 598 9.3 Start Holes Recognition. .................................................................................................................... 599 9.4 Holes Recognition User Interface. ................................................................................................... 600 9.4.1 Holes Recognition Manager................................................................................................... 600 9.4.2 Holes Recognition Toolbar.................................................................................................... 601 9.5 Hole Feature Model. ........................................................................................................................... 603 9.5.1 Cylindrical Hole Feature segment. ......................................................................................... 604 9.5.2 Cone Hole Feature segment................................................................................................... 604 9.5.3 Chamfer Hole Feature segment............................................................................................. 605 9.5.4 Planar Hole Feature segment................................................................................................. 605 9.5.5 Torus Hole Feature segment.................................................................................................. 605 9.5.6 Sphere Hole Feature segment................................................................................................ 606 9.5.7 Compound Holes processing. ................................................................................................ 606 9.5.8 Disconnected Holes processing. ............................................................................................ 607 9.5.9 Reaming recognition. ............................................................................................................... 607 9.5.10 Hole Feature Shapes and Groups....................................................................................... 607 9.5.11 Hole Features page................................................................................................................ 608 9.6 Preparing Hole Features for machining.......................................................................................... 613 9.6.1 Undercut processing................................................................................................................ 613 9.6.2 Undercut substitution. ............................................................................................................. 614 9.6.3 Segments Union....................................................................................................................... 617 9.6.4 Machinable Hole Features...................................................................................................... 619 9.6.5 Machinable Hole Feature conversion................................................................................... 625 9.6.6 Machinable Hole Features page............................................................................................. 633 9.7 Feature Sets. ......................................................................................................................................... 642 9.7.1 Creating Feature Sets............................................................................................................... 642 9.7.2 Assigning Hole Features to Feature Sets.............................................................................. 642 9.7.3 Automatic CoordSys Positions definition............................................................................ 643 9.7.4 Feature Sets page...................................................................................................................... 645 9.7.5 Compatible/Incompatible Hole features............................................................................. 645
16
Contents
9.7.6 Operating Feature Sets............................................................................................................ 646 9.7.7 Defining the CoordSys Position origin location for the Feature Set............................... 647 9.8 Technology.......................................................................................................................................... 649 9.8.1 Choosing a Technological Solution....................................................................................... 649 9.8.2 Choosing the tool. .................................................................................................................... 650 9.8.3 Technology Page...................................................................................................................... 657 9.8.4 Managing Technology............................................................................................................. 658 9.9 Generating Operations...................................................................................................................... 661 9.10 Technology Database. ...................................................................................................................... 662 9.10.1 Global and Local Technology databases............................................................................ 663 9.10.2 Technology Database interface. ........................................................................................... 664 9.10.3 Configurations page.............................................................................................................. 664 9.10.4 Current Configuration.......................................................................................................... 665 9.10.5 Solutions page........................................................................................................................ 666 9.10.6 Conditions. .............................................................................................................................. 667 9.10.7 Variables.................................................................................................................................. 670 9.10.8 Defining a new Technological Solution............................................................................. 673 9.10.9 Holes Recognition Functions.............................................................................................. 674 9.11 Holes Recognition Settings............................................................................................................. 676 9.11.1 System settings....................................................................................................................... 676 9.11.2 Part settings. ............................................................................................................................ 679
10. Simulation
10.1 Introduction...................................................................................................................................... 682 10.1.1 Simulation control panel....................................................................................................... 682 10.1.2 Simulation modes. .................................................................................................................. 684 10.1.3 Simulation controls................................................................................................................ 684 10.2 2D simulation mode. ........................................................................................................................ 685 10.2.1 Simulation toolbar. ................................................................................................................. 685 10.2.2 Simulation control panel....................................................................................................... 685
17
10.3 VerifyPlus simulation mode............................................................................................................ 687 10.3.1 Simulation toolbar. ................................................................................................................. 687 10.3.2 Buttons available in the Setup mode. .................................................................................. 688 10.3.3 Buttons available in the Simulation mode. ......................................................................... 690 10.4 Host CAD simulation mode........................................................................................................... 691 10.5 3D simulation mode. ........................................................................................................................ 692 10.5.1 Simulation toolbar. ................................................................................................................. 692 10.5.2 Simulation menu.................................................................................................................... 693 10.6 SolidVerify simulation mode. .......................................................................................................... 695 10.6.1 Simulation control panel........................................................................................................ 695 10.6.2 Simulation toolbar. ................................................................................................................. 696 10.6.3 Selection mode....................................................................................................................... 700 10.6.4 Measurement.......................................................................................................................... 701 10.6.5 Updated Stock model............................................................................................................ 701 10.6.6 Simulation menu.................................................................................................................... 703 10.7 SolidVerify for 3D simulation mode............................................................................................. 710 10.7.1 Simulation control panel........................................................................................................ 711 10.7.2 Rendering of the simulation model.................................................................................... 711 10.7.3 Simulation toolbar. ................................................................................................................. 713 10.7.4 Simulation menu.................................................................................................................... 713 10.8 Rest Material simulation mode....................................................................................................... 714 10.9 RapidVerify simulation mode......................................................................................................... 715 10.9.1 RapidVerify control panel..................................................................................................... 715 10.9.2 Updated Stock Model. ........................................................................................................... 716 10.9.3 Simulation control panel........................................................................................................ 716 10.9.4 Simulation toolbar. ................................................................................................................. 717 10.9.5 Simulation menu..................................................................................................................... 718 10.10 Machine Simulation. ....................................................................................................................... 719 10.10.1 Simulation menu.................................................................................................................. 720 10.10.2 Simulation windows............................................................................................................ 732
18
Contents
10.10.3 Simulation toolbars. ............................................................................................................. 741 10.10.4 CNC-machine definition parameters............................................................................... 743 10.10.5 CNC-machine model definition........................................................................................ 760
12.7.5 Set Tool as Permanent when user changes the tool number.......................................... 811 12.8 Color settings.................................................................................................................................... 812 12.9 Default Geometry Names. .............................................................................................................. 814 12.10 Interoperational tool movements................................................................................................ 815 12.11 AutoSave settings........................................................................................................................... 816 12.12 Automatic CAM-Part definition.................................................................................................. 817 12.12.1 Automatic Stock model definition.................................................................................... 817 12.12.2 Automatic Target model definition.................................................................................. 818 12.12.3 Definition of Coordinate System..................................................................................... 818 12.13 Tool path simulation settings. ....................................................................................................... 819 12.14 Machine simulation settings. ......................................................................................................... 820 12.14.1 Directory for Machine simulation definition.................................................................. 820 12.14.2 Tool path coordinates......................................................................................................... 820 12.14.3 Background. .......................................................................................................................... 820 12.14.4 Enable collision control...................................................................................................... 822 12.14.5 Solid verification.................................................................................................................. 822 12.14.6 Environment........................................................................................................................ 823 12.15 DNC settings.................................................................................................................................. 823 12.16 Editors settings............................................................................................................................... 824 12.17 External program settings. ............................................................................................................ 825 12.18 Machining Process settings........................................................................................................... 826 12.18.1 On MP insertion (for milling only). ................................................................................. 826 12.18.2 Operation name in SolidCAM Manager.......................................................................... 826 12.18.3 Update extra parameters on CNC-controller change.................................................... 826 12.19 User interface settings. ................................................................................................................... 827 12.20 CoordSys settings........................................................................................................................... 828 12.21 GCode Generation. ........................................................................................................................ 829 12.22 Tool search...................................................................................................................................... 833
20
Contents
12.23 Internal Post-processor................................................................................................................. 833 12.24 SolidCAM Manager settings......................................................................................................... 834 12.25 Template defaults........................................................................................................................... 835 12.26 Miscellaneous settings. ................................................................................................................... 835 12.27 Tool coolant.................................................................................................................................... 836 12.28 Gouge check................................................................................................................................... 836
11. GCode
11.1 Generate. ............................................................................................................................................ 839 11.2 List......................................................................................................................................................840 11.3 Copy...................................................................................................................................................840 11.4 Print....................................................................................................................................................840 Appendix.................................................................................................................................................... 841 Index...........................................................................................................................................................845
21
22
SolidCAM Basics
SolidCAM is a powerful CAM product that has been designed especially for the shop floor. SolidCAM supports the complete range of major manufacturing applications including 2.5D Milling, 3D Milling, Turning, Turning with Driven tools and Wire EDM, in one integrated solution. Machining operations can be defined on 2D Design Drawings as well as on 3D Solid and Surface Models. SolidCAM also has a powerful general post-processor tool that enables the easy customization of the GCode file output to various types of CNC-controllers. This chapter discusses some basic concepts and terminology used throughout SolidCAM. Installing SolidCAM Starting SolidCAM SolidCAM Basic Concepts SolidCAM Interface Getting Help
RAM 2 GB RAM or more (4 GB or more for x64 operating system is recommended for large CAM-Parts machining); Video A OpenGL workstation graphics card (512 MB RAM recommended) and latest driver; Other Mouse or other pointing device; CD drive; Internet Explorer version 6 if you are using the SolidCAM Online Help; For viewing the Whats New manual, Adobe Acrobat version 9 or higher is recommended.
1. SolidCAM Basics
Autodesk Inventor 2008, 2009; Bentley Microstation/J Modeler; Autodesk Mechanical Desktop 2005; Autodesk AutoCAD 2005.
Choose English. When you have to install a localized version of SolidCAM, choose the appropriate language from the combo box. The installation procedure is continued. 3. The following message is displayed.
Close all running applications and confirm the message with the OK button.
25
4. The Installing SolidCAM dialog box is displayed. Click on the Next button.
This dialog box enables you to choose the destination folder for SolidCAM. You have to either confirm the default destination folder (C:\Program Files\ SolidCAMXXXX) with the Next button or choose other destination folder with the Browse button and confirm it with the Next button. 6. The Select Components dialog box is displayed.
Choose the necessary SolidCAM components and confirm your choice with the Next button.
26
1. SolidCAM Basics
Make a note that Program Files component cannot be cleared. 7. The Select Program Folder dialog box is displayed.
Confirm the default Program Folder name SolidCAMXXXX with the Next button. SolidCAM installation is continued. 8. When the installation is finished, the Choose Language dialog box is displayed.
Choose English and click on the OK button. When you install a localized version of SolidCAM, choose the appropriate language from the combo box. 9. SolidCAM installs drivers for the hardware key. When the drivers are installed, the following message is displayed.
10. The Connection to CAD system dialog box is displayed. This dialog box displays all CAD systems that can be used by SolidCAM.
Choose the appropriate Host CAD systems for SolidCAM. When SolidCAM has found only one CAD system available for connection, this dialog box is not displayed. Click on the Next button. SolidCAM is connected to the defined CAD systems. The following message is displayed.
1. SolidCAM Basics
Setting up the SolidCAM License Server SolidCAM network licensing supports TCP/IP network protocol. 1. SolidCAM Network hardware keys are available in two configurations: for USB port or for LPT port. Connect your SolidCAM Network hardware key to the correct port of your server. 2. Install SolidCAM software on the server as explained in topic 1.1.3. During the installation, the necessary driver for the hardware key is automatically installed. 3. After the SolidCAM installation, the server must be restarted. 4. Install the License Manager software by running Lmsetup.exe application located in the ..\SolidCAMXXXX\Util folder. 5. Check the IP address of the server in the network by clicking on the Start button located at the Windows taskbar and then choosing the Command Prompt item from the All Programs/Accessories submenu. The Command Prompt window is displayed.
29
6. Type the ipconfig command and confirm it with the Enter key. The IP address of the server will be displayed. Setting SolidCAM licenses on client computers 1. Install SolidCAM on client computer as described in topic 1.1.3. 2. Copy the NethaspTCPIP.ini file located in the ..\SolidCAMXXXX\Util folder to the ..\SolidCAMXXXX\Solidcam folder. 3. Rename the copied file from NethaspTCPIP.ini to Nethasp.ini. 4. Open the renamed Nethasp.ini file in the Notepad editor. The [NH_TCPIP] section in this file contains the following string: NH_SERVER_ADDR = XX.XX.XX.XX; This parameter should define the IP address of the License Server. Type the IP address of the server instead of XX.XX.XX.XX, for example: 72.14.207.99. Save the Nethasp.ini file and close the Notepad application. After the License Manager is installed on the SolidCAM Licensing server and SolidCAM Licenses are configured on each client computer, SolidCAM software can be run.
30
1. SolidCAM Basics
SolidCAM is started.
31
SolidCAM Manager
Operations
The SolidCAM Manager tree is the main interface feature of SolidCAM. It displays complete information about the CAM-Part and contains the following headers:
CAM-Part header
This header displays the name of the current SolidCAM CAM-Part. By right-clicking on it, you can display the menu to manage your CAM-Parts. The CoordSys Manager, Stock, Target, and Settings subheaders are located under the CAM-Part header. Double-clicking on this header displays the Milling Part Data dialog box. For more information on CAM-Parts, please refer to Chapter 2.
32
1. SolidCAM Basics
Tool header
This header displays the name of the current Tool Table. By right-clicking on it, you can activate the menu to manage the Tool Libraries. Double-clicking on this header displays the Part Tool Table. For more information on Tools, please refer to Chapter 3.
Machining Process header
This header displays the name of the current Machining Process Table. By rightclicking on it, you can activate the menu to manage the MP Tables. Double-clicking on this header displays the Current Machining Process Table. For more information on Machining Processes, please refer to Chapter 8.
Geometries header
This header displays all SolidCAM geometries not used in the operations. You can view the list of these geometries by clicking on the + icon near the Geometries header. You can display the geometries managing menu by right-clicking on the Geometries header. You can also open the relevant menu by right-clicking on each geometry name. Double-clicking on a geometry name displays the selected geometry. For more information on Geometries, please refer to Chapter 4.
Operations header
This header shows you all the SolidCAM operations defined for the current CAM-Part. The operations managing menu is available by right-clicking on the Operations header. You can also open the relevant menu by right-clicking on each operation name. Double-clicking on an operation name enables you to edit the operation parameters in the operation dialog box. For more information on operations, please refer to Chapter 5. Item search in SolidCAM Manager The SolidCAM Manager search system works similarly to a regular Windows searching functionality. To activate it, click anywhere in the SolidCAM Manager area and press Ctrl+F. The Find dialog box is displayed, and you can set the parameters for searching.
33
Look in
You may look for the required items in the whole CAM-Part or only in its operations, coordinate systems or geometries taken separately.
Whole items only
Select this check box if you want to check the availability of whole items as opposed to partial output.
Match case
This check box enables you to determine the case sensitivity of the search.
Direction
You may also decide whether the search results will be displayed from bottom to top or from top to bottom of the SolidCAM Manager tree.
Find next
Click this button if you want to view the search results one by one.
Find all
Click this button if you prefer to have all of the search results to be displayed simultaneously.
General
Manager
The whole line where the sought-for word appears is highlighted in the SolidCAM tree. When you close the Find dialog box, these lines remain highlighted.
34
1. SolidCAM Basics
35
The Help is available via the SolidWorks Help menu. Click on the Help item in the main menu of SolidWorks and choose the SolidCAM Help Topics, Milling items from the submenu.
SolidCAM Help is fully context-sensitive. You can get a Help topic for each SolidCAM dialog box by pressing the F1 key. To get information about a specific dialog box area like field or button, click on the question mark in the upper-right corner of the dialog box and then click on the field or button you need. The Online Help is displayed and then the appropriate topic is explained.
The Machining Portfolio is also available in the Documentation folder. This document provides an overview of various features of SolidCAM.
36
CAM-Part
At the stage of the CAM-Part definition, you have to specify all the information relevant to the machining project or workpiece you want to manufacture. The CAM-Part folder includes all machining geometries, operation definitions and generated GCode files. The parameters and values defined at the CAM-Part level, such as Coordinate System, Milling levels and Tools will serve as default values for separate machining operations. All specified parameters can be changed in single operations.
Starting a new Milling CAM-Part Managing CAM-Parts Defining the Coordinate System Defining the Stock model Defining the Target model CAM-Part Documentation
1. Click on the SolidCAM item in the SolidWorks menu. The SolidCAM main menu is displayed. 2. Choose the New option from the menu to define a new CAM-Part. 3. Choose the Milling type of new CAM-Part from the submenu. 4. The New Milling Part dialog box is displayed. When you start to program a CAM-Part, you have to decide on: What type of CNC-machine you are going to use (3-, 4- or 5-axis); Where you are going to clamp this part; Where your Coordinate System positions are located (on a 4- or 5-axis CNC-machine, every clamping position is represented by the Coordinate System to which all additional positionings are related).
38
2. CAM-Part
In this field, you specify the location of the CAM-Part. The default directory is the SolidCAM user directory (defined in the SolidCAM Settings). You can enter the path or use the Browse button to define the location. The Use Model file directory option enables you to automatically create CAM-Parts in the same folder where the original CAD model is located.
Name
In this field, you enter the name for the CAM-Part. You can give any name to identify your machining project. By default, the name of the design model is used.
Model name
This field shows the name and the location of the SolidWorks design model that you are using for the CAM-Part definition. The default name is that of the active SolidWorks document. With the Browse button, you can choose any other SolidWorks document to define the CAM-Part. The chosen document is loaded into SolidWorks. Every time the CAM-Part is opened, SolidCAM automatically checks the correspondence of the dates of the CAM-Part and the original SolidWorks design model. When the date of the original SolidWorks model is later than the date of the CAM-Part creation, this means that the SolidWorks original model has been updated. You can then replace the SolidWorks design model on which the CAM-Part is based with the updated SolidWorks design model. After the Directory, Name and Model name fields are defined, click on the OK button to confirm the CAM-Part creation. The CAM-Part is defined and its structure is created. The Milling Part Data dialog box (see topic 2.1.3) is displayed.
39
SolidCAM copies the original SolidWorks model to the Cavity subdirectory and creates a SolidWorks assembly that has the same name as the CAM-Part (Cavity.sldasm). There are two components in this assembly: DesignModel.sldprt a copy of the SolidWorks model file. CAM.sldprt a file that contains SolidCAM Coordinate Systems and geometry data. SolidCAM CAM-Part uses the assembly environment of SolidWorks. This enables you to create auxiliary geometries (e.g. sketches) without making changes in the original design model. You can also insert some additional components into the assembly file such as stock model, CNC-machine table, clamping and other tooling elements.
40
2. CAM-Part
X-direction
If you define the first Coordinate System in the current CAM-Part, the CoordSys dialog box (see topic 2.2.2) is displayed. This dialog box enables you to define the Coordinate Systems. If the CoordSys that you define is not the first, the CoordSys Manager dialog box (see topic 2.3) is displayed. This dialog box enables you to manage your Coordinate Systems. You can also define new Coordinate Systems at the later stages of operation definition by clicking on the CoordSys button available in the Geometry page of the operation dialog box (see topic 5.2.6).
41
42
2. CAM-Part
Cylindrical/Conical face
The Z-axis of the Coordinate System is parallel to the axis of revolution of the specified cylindrical/conical face.
Pick face Selecting this check box enables you to pick a face on the model for the Coordinate System definition. The selected model face is highlighted. Change to opposite/Change to original This button enables you to reverse the direction of the Z-axis of the Coordinate System.
43
The upper plane of the model box is parallel to the XY-plane of the defined CoordSys. The CoordSys is located in the corner of the model box with the following coordinates (XMIN, YMIN, ZMAX).
CoordSys Origin
Center of revolution face
The origin is located at the intersection of the rotation axis of the part and the face of the model box with the maximal Z-coordinate (the Z-axis is directed along the rotation axis).
CoordSys Origin
Z
Top center of model box
The CoordSys origin is placed in the center of the upper plane of the model, and the Z-axis of the CoordSys is normal to the selected face.
CoordSys Origin
Corner box projection on the Z-level of the face
The CoordSys origin is placed in the corner of the generated model box on the same Z-level with the selected face, and the Z-axis of the CoordSys is normal to the selected face.
CoordSys Origin
44
2. CAM-Part
Define This option enables you to define the CoordSys origin and axes by selecting points.
Origin
Select a point that defines the plane (the Y-axis is 90 degrees to the X-axis; the selected point defines the plane). After a point has been selected, the next button is automatically activated. If you miss the selection, you can at any time click the required button and continue automatically to the next button. Select Coordinate System SolidCAM enables you to choose the Coordinate System defined in the CAD model file as the SolidCAM Coordinate System.
45
Normal to current view This option enables you to define the Coordinate System with the Z-axis normal to the model view you are facing on your screen. You may bring the model to the desired orientation by using the CAM Views toolbar or just rotate it in an arbitrary fashion; then click on the Capture current view CoordSys button, and the Coordinate System will be generated relative to the model view you are using. The CoordSys origin will lie in the origin of the SolidWorks Coordinate System, and the Z-axis will be directed normally to the chosen view of the model. You may change the location of the CoordSys using the placing options of the Select face mode, and then choose the Normal to current view mode to adjust the directions of the axes to the current model view. Editing the Coordinate System After the face has been selected, you can edit the Coordinate System location by picking entities on the model and change the directions of its axes. Pick
Pick origin
X-axis of the Normal to current view CoordSys Y-axis of the Normal to current view CoordSys
This option enables you to define a new location for the CoordSys origin. The direction of the axes is not changed.
Pick XY origin
This option enables you to define a new location for the CoordSys origin in the XYplane by picking a point on the model. The Z-level of the CoordSys origin and the directions of the axes remain the same.
Pick X-direction
This option enables you to choose a new direction for the X-axis by picking a point on the model.
46
This option enables you to choose a new direction for the Y-axis by picking a point on the model. Flip
Flip X&Y
Click on this button to rotate the Z-axis 180 degrees by mutual replacing of the X- and Y-axes (X becomes Y, and Y becomes X).
Flip around X
This button rotates the defined CoordSys 90 degrees around the Z-axis. Delta This option enables you to move the CoordSys origin in the X-, Y-, and Z-coordinates relative to the point in which it was previously defined.
Rotation around axis This option enables you to rotate the defined CoordSys a given number of degrees around the X-, Y- and Z-axes, but the rotation can only be defined around each axis separately. You cannot rotate the CoordSys around more than one axis simultaneously.
47
Clamping
For the next Coordinate System, you also have to define three points.
Y-direction (third point) X-direction (second point)
SolidCAM automatically assigns a new Position number to each Coordinate System. You can change the Mac CoordSys number for a new clamping (Machine Coordinate System).
48
2. CAM-Part
Clamping
To add a new Position, you have to define only two points: The point for the CoordSys origin. The point on the plane to rotate to. If the rotation axis is X, you have to define the Y-direction. If the rotation axis is Y, you have to define the X-direction.
Y-direction (second point) X-direction (determined automatically)
Clamping
SolidCAM automatically assigns the new Position number to each CoordSys. You can change the Mac CoordSys number for a new clamping (Machine Coordinate System).
49
The rotation axis is automatically defined by SolidCAM according to the Axis type (see topic 2.8.1). The Shift and Rotation around parameters are calculated automatically.
Clamping
Clamping
50
2. CAM-Part
SolidCAM automatically assigns the new Position number to each CoordSys. You can change the Mac CoordSys number for a new clamping (Machine Coordinate System). The rotation axis is defined automatically by SolidCAM according to the Axis type (see topic 2.8.1). The Shift and Rotation around parameters are calculated automatically.
Choose the origin location at the intersection point of the lines and define the axes directions. Coordinate System definition using a stock box
SolidCAM enables you to generate the stock box surrounding the model automatically with a defined offset (see topic 2.4.1). The top stock plane is parallel to the XY-plane of the Machine Coordinate System. Define the CoordSys in the stock box corner. Sometimes the model is located in the assembly in such a way that you need to rotate it before using the 3D Box option in order to calculate the optimal stock.
51
Machine CoordSys number defines the number of the Coordinate System in the CNC-machine. The default value is 1. If you use another number, the GCode file will contain the G-function that tells the machine to use the specified number stored in the controller of your machine. The Tool start level defines the Z-level at which the tool starts. The Clearance level is the Z-level to which the tool rapidly travels when moving from one operation to another (in case the tool does not change). The CAM-Part Upper level defines the height of the upper surface of the part to be milled. The CAM-Part Lower level defines the lower surface level of the part to be milled.
Tool start level Rapid movements area Clearance level Feed movements area Part Upper level Part Lower level
52
2. CAM-Part
The Tool Z-level is the height that the tool moves to before the rotation of the 4/5 axes to avoid collision between the tool and the workpiece. This level is related to the CoordSys position and you have to check if it is not over the limit switch of the machine. It is highly recommended to send the tool to the reference point or to a point related to the reference point. The Plane box defines the default work plane for the operations using this CoordSys, as it is output to the GCode program. In the SolidCAM CAM module, you must always work on the XY-plane. Some CNC-machines, however, have different axes definitions and require a GCode output with rotated XY-planes. Choose one of the following options: XY the XY-plane is the work plane; the Z-axis is the depth (G17). YZ the YZ-plane is the work plane; the X-axis is the depth (G18). ZX the ZX-plane is the work plane; the Y-axis is the depth (G19). This option works correctly only when your post-processor has been customized to support this function. Please contact customer support for further details. Shift is the distance from the Machine Coordinate System (Mac CoordSys) to the location of the Position in the coordinate system and the orientation of the Mac CoordSys. Rotation is the angle of rotation around the main axes X, Y and Z. For the first Position number related to a new Mac CoordSys number, the Shift and Rotation around parameters are always 0. Shift and Rotation for other Position Numbers related to the same Mac CoordSys number are determined automatically. The Edit CoordSys button enables you to change the CoordSys location or orientation of the axes with the CoordSys dialog box.
53
Create planar surface at Part Lower level This option enables you to generate a transparent planar surface at the minimal Z-level of the part so that its lower level plane is visible. This planar surface provides you the possibility to select points that do not lie on the model entities. It is suppressed by default and not visible until you unsuppress it in the FeatureManager Design tree. To unsuppress the feature, right-click on its entry under the CAM component in the FeatureManager Design tree and button. click on the Unsuppress
This option is available only when the Coordinate System has been defined by selecting a face.
Z Y
X
X
SolidCAM Coordinate System
Use the CAM Views toolbar to see the SolidCAM coordinate system. These views are related to the orientation of the selected CoordSys position.
54
2. CAM-Part
55
Delete CoordSys This command deletes an existing Coordinate System. You can only delete Coordinate Systems if more than one CoordSys has been defined for the current CAM-Part. You cannot delete the first Machine CoordSys and a CoordSys that is used for the operation (the Delete command in the menu is disabled in these cases). 1. Choose the Coordinate System you want to delete. The confirmation dialog box is displayed.
2. Click Yes to confirm. Rename CoordSys This command enables you to rename the chosen Coordinate System. Default name This command enables you to return the Coordinate System name to the default value. Create/Delete Planar surface This option enables you to create the planar surface at the Z-level of the model if you have not selected the Create planar surface at Part lower level check box at the stage of CoordSys data definition, or to delete the created planar surface if you have selected this check box. CoordSys visibility The Coordsys Manager dialog box enables you to control the visibility of Coordinate Systems. This feature simplifies the work when you have a number of coordinate systems. In the CoordSys Manager dialog box, clear the check boxes for the coordinate systems in order to hide them.
56
2. CAM-Part
The Stock model is used for: SolidVerify, SolidVerify for 3D, VerifyPlus and Machine simulation; For rest material calculation in 3D Milling operations.
The stock model is not automatically associated with the solid model. If the model is changed and the stock is not correct any more, you will see it in the simulation; you can then replace the defined stock with the updated one. Note that the SolidVerify, SolidVerify for 3D and VerifyPlus simulations do not work without the Stock model defined.
Target model
machining.
The Target model is used for: 3D simulation; Rest material calculation; Gouge checking in the SolidVerify simulation. During all machining operations, the remaining rest material is removed so that the Target model can be obtained. Facet tolerance The Facet tolerance parameter defines the accuracy of triangulation of the stock and target models, fixture or clamp.
57
The 3D Model mode enables you to define the stock model via 3D model selection and is useful for casting machining. When you choose this mode and click on the Define button, the 3D Geometry dialog box is displayed.
The Box (Auto) mode enables SolidCAM to automatically determine the box surrounding the model. When you choose this mode and click on the Define button, the 3D Box dialog box is displayed.
58
This dialog box is used to select a 3D model to create a 3D box around the model.
The Name option enables you to define the name for the stock model. The default geometry name is assigned automatically and can be edited if necessary. The Type option enables you to choose the type of model elements that will be selected: Solids (solid models), Surfaces, or Both. The Expand box at option enables you to define how much access stock material you have in each direction of the stock material. The CAD selection button enables you to pick the model with the Host CAD tools. The Add box to CAD model button enables you to add the stock box to the CAD model.
The STL file mode enables you to define the stock model based on a STL file that exists in your system. When you choose this mode and click on the Define button, the Choose STL dialog box is displayed. This dialog box enables you to choose the STL file for the stock definition.
Choose STL dialog box
The Name option enables you to define the name of the STL stock geometry. The default geometry name is assigned automatically and can be edited if necessary. The STL File section shows the path to the STL file chosen for the stock geometry definition. The Browse button enables you to display the browser dialog box from which you will choose the required STL file. The Show button enables you to display the defined stock in the Rest material window of SolidCAM (see topic 2.4.3). The Show on model button enables you to display the defined stock in the SolidCAM graphic area applied to the solid model (see topic 2.4.3).
59
2.4.3 Common controls for Stock model and Target model dialog boxes
Name In this field, you can see the stock or target model name and choose the model from the previously defined 3D geometries. Show Click on this button to show the Stock or Target model in the Rest material window of SolidCAM.
Target model
Stock model
To control the quality of the Stock and Target models visualization, you can change the Facet tolerance in the Milling Part Data dialog box. The recommended value is 0.01 mm. A smaller tolerance will improve the quality and reduce the visualization speed.
60
2. CAM-Part
Show on model Click on this button to see the selected Target model in the Host CAD window.
Target model
Stock model
Self-intersections The Check and fix button in the Self-intersections section enables you to check the model for selfintersections and fix them if they are found. When self-intersections are detected, the following message is displayed:
Confirm it with the Yes button to fix the self-intersections. Note that the process of self-intersection fixing can take a long time to complete, depending on the complexity of the model. For more information on self-intersections, see topic 10.6.6.
If SolidCAM determines a misfit between the SolidWorks model and the Stock/Target model geometry, this geometry is marked with the synchronization mark .
If the Stock/Target model geometry is not synchronized with the SolidWorks model, the Synchronize command enables you to update the Stock/Target model geometry according to the updated SolidWorks model.
62
2. CAM-Part
In the Tool Options dialog box, you can edit the values for the current CAM-Part. Start point This field determines the position of the first tool in the beginning of the milling. End point This field determines the position of the last tool in the end of the milling. In most of the cases, the value in this dialog box will only affect the simulation. To affect the generated NC-program, the post-processor must use these values. Normally, the new CNC-controllers do not need the start and end position. In the postprocessor, you use the machine command to move to the machine reference point.
63
Tool change XY This field defines the XY-coordinates of the tool change position. There are two options:
Default as in MAC file
The XY-coordinates of the tool change position are defined by the end point of the operation that was executed before the tool change.
Define
The XY-coordinates of the tool change position are defined by the user. Tool change Z This field defines the Z-coordinate of the tool change position. There are two options:
Default as in MAC file
The Z-level where tool changes are performed is automatically read from the Tool start plane specified in the CoordSys Data dialog box (default input from MAC file).
Define
The Z-coordinate of the tool change position is defined by the user. Feed type Defines the default type of feed used for the tool of this CAM-Part. There are two options: Mm/Min Millimeters per Minute; Mm/Rev Millimeters per Revolution.
64
2. CAM-Part
In case of Numeric or Integer field type, the Numeric/Integer Value dialog box is displayed and you are prompted to enter a value. In case of Logical field type, the Logical Value dialog box is displayed and you are prompted to choose between Yes and No. Refer to the GPPTool manual for additional information.
The Work material field enables you to get Speed/Feed Defaults (see topic 3.11) based on the work and tool materials that you are using. If you choose the None option, the system will offer you the internal standard value spin of 1000 rpm and the default feed for X, Y movement of 100 mm/min.
65
The axis type defines the Coordinate System definition method: 3 axis In this type of machine, every side requires a new clamping (new Machine CoordSys). For each Mac CoordSys, you have to define the origin position, the X-axis direction and the Y-axis direction.
4 axis
4_axis_around_X
This type is used for vertical machines with the 4th axis on the table along the X-axis. When defining the Machine CoordSys, you have to define the origin position, the X-axis direction and the Y-axis direction. For all additional positionings, based on this clamping, you have to define the origin position and the Y-axis direction only (the angle); the X-axis direction is determined automatically by the X-axis direction of the Machine CoordSys.
66
2. CAM-Part 4_axis_around_Y
This type is used for horizontal machines with the 4th axis along the Y-axis. When defining the Machine CoordSys, you have to define the origin position, the X-axis direction and the Y-axis direction. For all additional positionings, based on this clamping, you have to define the origin position and the X-axis direction only (the angle); the Y-axis direction is determined automatically by the Y-axis direction of the Machine CoordSys. 5 axis This type is used for 5-axis CNC-machines. For the Machine CoordSys, you have to define the origin position, the X-axis direction and the Y-axis direction. All additional positioning is related to this Machine CoordSys. Take care of the machine limitations (angles or undercuts). A message on the limit can be generated only during the GCode generation. In the definition process, it is not necessary to consider the kinematics of the CNC-machine. This is done in the last step when you generate the NC-program. A CAM-Part created for a CNC-controller of 3-axis type cannot be converted to 4- or 5- axis type. A CAM-Part created for the CNC-controller of 4-axis type can be converted to 3-axis type. A CAM-Part created for the CNC-controller of 5-axis type can be converted to 3-axis type.
67
get_prog_num get_proc_num
= Y = N
Program number This field enables you to define the number of the main program that will be generated in the output NC-program. This field has ranges that are controlled from the MAC file parameters.
prog_num_min prog_num_max prog_num_dflt = 1 = 9999 = 5000
68
2. CAM-Part
In this case, the default number is 5000. You can change this value and type a number between 1 and 9999. Typing any number beyond this range is followed with the message:
Subroutine number In this field, you can define the number of the first subroutine in the generated output NC-program. This field has ranges that are controlled from the MAC file parameters.
proc_num_min proc_num_max proc_num_dflt = 1000 = 5000 = 1000
In this case, the default number is 1000. You can change this value and type a number between 1000 and 5000. Typing any number beyond this range is followed with the same message as above. In some machines (for example, Fanuc), the main program number and subroutine number cannot be the same. SolidCAM does not warn you about this problem. In order to prevent this situation, you can set the main program range to 1 1000 and the subroutines range to 1001 to 9999 in the MAC file.
69
2.10.1 Units
The Units page shows the measurement units used in the current CAM-Part.
70
2. CAM-Part
71
This option controls the precision of the tool for the SolidVerify simulation.
Tool facet type
In addition to changing the tolerance used for faceting, the application controls the manner in which the faceted tool representation approximates the tool by forcing the representation to be bigger or smaller than the actual tool. For example, if you want to know whether the tool gouged the target part, it would probably be preferable to have a tool representation that is guaranteed to lie outside the bounds of the actual tool.
Internal.
The tool representation lies within the actual tool. The vertices of the tool representation will lie on the surface of the actual tool and the facets will lie within the actual tool.
External. The actual tool lies within the tool representation. The vertices will lie at distances up to the faceting tolerance from the surface of the actual tool.
This is a combination of the Internal and External modes. The vertices lie outside the actual tool but parts of the facets may lie inside it. This mode is the default and should be used unless there is a specific reason for using one of the other modes as it generates fewer facets and will therefore be faster.
72
Mixed.
2. CAM-Part
5 Axis The Linear interpolate option enables you to perform the linear interpolation of 5-axis tool movement. The Max. interpolation angle value defines the angular tolerance for the interpolation. Update stock model method This section enables you to choose the method of Stock model updating.
Automatic Save updated stock model for every specified number of operations: SolidCAM automatically calculates and saves the Updated Stock model. The specified number enables you to define the quantity of intermediate USM files. For example:
if the specified number is 1, SolidCAM automatically saves intermediate USM files for each operation; if the specified number is 2, SolidCAM automatically saves intermediate USM files for all even operations (2nd, 4th, 6th, etc.); if the specified number is 0, SolidCAM does not save intermediate USM files.
Save updated stock model for operations with a long tool path only:
SolidCAM automatically estimates the time required for simulation of operations and saves the updated stock for those operations whose tool path is considered too long.
Manual
SolidCAM enables you to manually save the updated stock model for a specific operation during the SolidVerify simulation. The simulation of the next operations can be performed on the updated stock model. Further 3D Milling operations can also use the saved USM for the cutting in Rest material areas. Automatically remove noise from input data During the faceting of Stock and Target models, the coordinates of facets generated by SolidCAM are often calculated as numbers of the float type with many digits after the point. These numbers cause problems during the SolidVerify simulation, such as self-intersections and gaps in model. The Automatically remove noise from input data check box enables you to use a smart rounding algorithm that removes the noise in facet coordinates so that the model is displayed properly. Note that the process of removing the noise may take a long time to complete.
73
Rest Material calculation tab This tab enables you to define the Updated Stock parameters and options used for the Rest material calculation in 3D Milling operations. Update stock accuracy This section enables you to define the USM accuracy parameters for the Rest material calculation. 5 Axis The Linear interpolate option enables you to perform the linear interpolation of 5-axis tool movement. The Max. interpolation angle value defines the angular tolerance for the interpolation. Current Stock model method This section displays the method of Stock model updating used for the Rest Material calculation. The setting of this section can be changed in the SolidVerify tab. SolidVerify for 3D tab This tab enables you to define the Updated Stock parameters and options relevant for the SolidVerify for 3D simulation. The Updated Stock calculation parameters defined for this type of simulation are similar to those defined for SolidVerify. Since in this simulation mode analytical surfaces are used instead of facet models used for SolidVerify, the Updated Stock model accuracy section is not relevant.
74
2. CAM-Part
2.10.4 Synchronization
This page enables you to define the synchronization settings for the current CAM-Part when its model configuration is changed.
The Synchronization when design model configuration changes section provides you with the following options:
Keep the geometry associative with the parent configuration
This option enables you to keep the link between the geometry and the parent configuration. SolidCAM always keeps the geometry linked to the parent configuration (the configuration used for the geometry definition). When you switch between the model configurations, the geometry is not affected; synchronization is required only if the parent configuration is changed.
Geometry Geometry
Conguration #1
Conguration #2
75
This option enables you to establish the link between the geometry and the current configuration and perform the synchronization according to the current configuration.
Geometry Geometry
Conguration #1
Conguration #2
After such synchronization, the geometry is linked to the current configuration until you switch to another one.
Automatic Stock model definition The Definition of Stock (as 3D box) option enables you to automatically define the 3D box stock model during the CAM-Part definition. The stock model is based on all solid bodies and/or surfaces of the DesignModel component of the CAM-Part assembly.
76
2. CAM-Part
Define Stock by. This option enables you to choose the type of elements (solid bodies and/or surfaces) from the DesignModel model to use. Expand box at. This option gives you complete control over how much access stock material you have in each direction of the stock material. The Add box to CAD model option enables you to add the stock model box to the CAD model. Automatic Target model definition The Definition of Target check box enables you to automatically define the target model during the CAM-Part definition. The target model is based on all the solid bodies and/or surfaces of the DesignModel component of the CAM-Part assembly. The Define Target by option enables you to choose the type of elements (solid bodies and/or surfaces) from the DesignModel component of the CAM-Part assembly. Definition of Coordinate System When the Single CoordSys check box is selected, SolidCAM enables you to shorten the process of CoordSys definition by skipping the CoordSys Manager dialog box after the first CoordSys definition. This option is useful when defining CAM-Parts with only one Coordinate System. When the Single CoordSys check box is cleared, SolidCAM displays the CoordSys Manager dialog box after the first CoordSys definition. The CoordSys Manager enables you to define an additional Coordinate System. This option is useful when defining CAM-Parts with several Coordinate Systems.
77
Prismatic part_20-6_nish_wall
Operation group name Default set name Operation name
78
2. CAM-Part
When this check box is not selected, only the operation names appear in the SolidCAM Manager tree.
Use Host CAD simulation as default When this option is chosen, the Host CAD simulation mode is used as default for each new simulation session. Remember last simulation option When this option is chosen, simulation starts in the last used mode.
79
80
2. CAM-Part
The Create button enables you to create the folder that will be used for GCode directory in the specified location. The Browse button displays the browser dialog box that enables you to choose another location that will be used for the GCode directory. If the new folder cannot be created, the following message is displayed:
If the chosen folder has the read-only attribute, the following message is displayed after the confirmation of the Browse dialog box or the Part Settings dialog box:
By default, the GCode directory location is not defined. You have to specify it when you choose the In the GCode directory option for the first time. Create subfolders for split GCode files When split marks are detected in SolidCAM Manager during the GCode generation for the entire CAM-Part, SolidCAM creates a number of GCode segment files. Each such GCode segment file is created for one or several operations enclosed by split marks. These files are named with the CAM-Part name followed by the - sign and the order number of a split segment. Split marks are ignored in case of GCode generation for several operations. With the In the GCode directory option, SolidCAM creates separate CAM-Part GCode folders in the specified folder location. When the Create subfolders for split GCode files check box is selected, SolidCAM creates a separate folder for each GCode segment file and saves the GCode segments files there. The folder is created in the GCode folder of the CAM-Part in the specified GCode folder location. The name of the folder is the same as the GCode segment file name.
81
When the Create subfolders for split GCode files check box is not selected, SolidCAM generates all the GCode segment files directly into the GCode folder of the CAM-Part in the specified GCode folder location. By default, the Create subfolders for split GCode files option is not selected. Create separate folders for each CAM-Part When this check box is selected, SolidCAM creates a folder for each CAM-Part and saves the GCode file there. Otherwise, the GCode files for all CAM-Parts are generated into the GCode directory. Additional control of GCode
When the Customize GCode file name check box is selected, you can alter the GCode file name and location. When you click one of the GCode generation commands, the Windows-style Save GCode browser is displayed with the default CAM-Part name and location that might be edited. All the GCode files previously generated for the current CAMPart remain in the specified folder. When this check box is not selected, the GCode is generated and automatically saved in the defined location.
82
2. CAM-Part
GCode generation for the entire CAM-Part The Erase all previous GCode files check box enables you to choose whether the old GCode files generated for this CAM-Part remain or are removed when a new one is generated. This check box is not available if the Create a separate folder for each CAM-Part check box is not selected and when the Customize GCode file name check box is selected.
GCode generation for separate operations The Erase all previous GCode files check box enables you to choose whether the old GCode files generated for separate operations remain or are removed when a new one is generated. This check box is not available if the Create a separate folder for each CAM-Part check box is not selected and when the Customize GCode file name check box is selected.
83
84
2. CAM-Part
Each tab contains a table that enables you to define the default templates for each operation type. When the default template use is activated for a specific operation (the check box in the operation type line is selected), the Template column offers you the list of available templates appropriate for this type of operation. When the template use is activated for an operation type, each new operation of this type will be loaded with the data of the specified template.
Templates activation/deactivation
When you clear the check box in an operation type row to deactivate the use of templates, the list in the Template column is unavailable. When you select the check box to activate template use for an operation type, the search is performed in the SolidCAM Template Directory for suitable templates of this type. The names of the found templates appear in the list, and the first of them is being chosen automatically. If no suitable templates are found, SolidCAM deactivates the use of templates for this operation.
Changing the SolidCAM Template Directory
When you change the path to the SolidCAM Template Directory, SolidCAM performs a search for suitable templates for all the operations with the activated default template use. When a template for some operation type is not found, SolidCAM deactivates the default template use for this operation type. Found templates are added into the related list. The first found template name is displayed. The search for templates is not performed for the operation types for which the use of templates is deactivated.
Creating sets of templates (working style)
Consider a folder containing a set of templates. This set contains only one template for each operation type, therefore, all operation types have assigned templates. The set of templates is customized for a specific application (e.g. Mold machining). Consider an additional folder containing a set of templates for another application. By switching between these folders for SolidCAM Template Directory, SolidCAM switches templates for all operation types. This enables you to choose a set of templates for a specific application quickly and easily.
85
86
2. CAM-Part
SolidCAM
Extracted CAM-Part
Open Close
Compressed CAM-Part
SolidCAM supports simultaneous work with both file formats: compressed CAM-Part and non-compressed CAM-Part. Each newly created CAM-Part can be created either in the compressed mode or in the non-compressed mode, depending on SolidCAM Settings (see topic 12.6). Each CAM-Part can be converted from open to compressed mode depending on the SolidCAM Settings (see topic 12.6).
87
The SolidCAM Temporary folder is automatically created by SolidCAM. By default, this folder has the following path: C:\Documents and Settings\<user name>\Local Setting\SolidCAM Temporary files. You can choose your own location for the SolidCAM Temporary folder via SolidCAM Settings (see topic 12.6). For example, the structure of the Shaft CAM-Part is the following:
C:\Program Files\SolidCAM2009\User Shaft.prz C:\Documents and Settings\<User name>\Local Settings\SolidCAM Temporary les Shaft.prt Shaft
Directory
If the compressed CAM-Part already exists in the location defined in the box; you cannot define a new CAM-Part with the same name. SolidCAM offers you to choose an alternative name or location.
After the CAM-Part definition, SolidCAM works with the CAM-Part data located in the SolidCAM Temporary folder. When the CAM-Part is being closed, SolidCAM updates the compressed CAM-Part with the CAM-Part data. After the update, the non-compressed copy is removed from the SolidCAM Temporary folder.
2. CAM-Part
If the CAM-Part session was not completed correctly and the Compressed CAM-Part was not updated successfully, the non-compressed data is not removed from the SolidCAM Temporary folder. In this case, SolidCAM finds the corresponding non-compressed data in the next Compressed CAM-Part and displays the following dialog box.
Continue with Compressed CAM-Part version The non-compressed data in the SolidCAM Temporary folder is updated with the content of the compressed CAM-Part. Continue with SolidCAM Temporary folder version The compressed CAM-Part is updated with the non-compressed data from the SolidCAM Temporary folder. The Exit button enables you to cancel the operation and solve the problem manually.
89
New This command creates a new CAM-Part. According to SolidCAM Settings (see topic 12.6), the CAM-Part can be created either in the compressed mode or in the non-compressed mode. Open This command loads a CAM-Part (compressed and non-compressed) that has been previously saved. According to SolidCAM Settings (see topic 12.6), the non-compressed CAM-Parts can be converted to the compressed mode. When you choose this option, the CAM-Parts browser is displayed.
90
2. CAM-Part
1. Select the CAM-Part you want to load. 2. Double-click on the CAM-Part or select it and click on the Open button. The default type for the Files of Type filter is defined in SolidCAM Settings. If a CAM-Part was created with the previous SolidCAM version, the backup can be performed during the CAM-Part opening, if necessary. The backup is created as a copy of the original file in the Backup of <CAM-Part name> folder. You can also open CAM-Parts by double-clicking on the *.prt files in the Windows Explorer environment. Manage Templates
Manager dialog
This command enables you to manage your operation and process templates using the Template box.
For more information on operation templates and process templates, see topic 5.2.2. Close SolidCAM closes the active CAM-Part. The Compressed CAM-Part file is being updated, if necessary.
91
Copy This command creates an identical copy of a CAMPart in another folder or drive for backup purposes or for making modifications without changing the original. The Copy Parts dialog box is displayed. 1. Choose the drive from which you want to copy the original CAM-Part. 2. Choose the CAM-Parts you want to copy from the CAMParts list. 3. Transfer the list of the CAM-Parts you want to copy to the middle field by clicking on the Left to Right arrow. 4. Choose the drive and the directory you want to copy to. 5. Click on the Copy button. This feature is unavailable for compressed files; they can be copied with standard Windows tools. Delete This command enables you to delete a CAMPart (compressed and non-compressed). The Part to Delete dialog box is displayed. The Files of type filter enables you to display either compressed or non-compressed CAMParts. The default filter value depends on SolidCAM Settings.
1. Select the CAM-Part you want to delete. Use the Ctrl key to select several CAM-Parts together. 2. Click on the Delete button.
92
2. CAM-Part
4. Choose Yes to All to delete all selected CAM-Parts. Calculate CAM-Parts This command enables you to calculate tool paths of all CAM-Parts (compressed and noncompressed) in the specified folder. The Calculate parts dialog box is displayed.
1. Click on the Add Directory button. 2. Choose the folder where the CAM-Part is situated via the standard Windows browser. 3. Click on the Calculate button to start the operation. You can also use the Delete All button to remove all the CAM-Parts from the specified folder. The compressed CAM-Part is extracted into the SolidCAM Temporary folder. The resulting noncompressed CAM-Part is opened by SolidCAM and calculated. The compressed CAM-Part is then updated and the non-compressed CAM-Part is removed from the SolidCAM Temporary folder. Change Model Reference SolidCAM enables you to change the reference to original SolidWorks model. This operation enables you to substitute the DesignModel component of the CAM-Part assembly with some SolidWorks model. 1. Choose the Change Model Reference command in the menu. The Change Model Reference dialog box is displayed.
93
2. Type the model name in the Model name edit box or choose the model with the Browse button. This button displays the browser dialog box that enables you to choose the SolidWorks model.
When the message is confirmed, the CAM-Part is closed, the CAM-Part Reference is updated, and then the updated CAM-Part is loaded again. CAM-Part Definition This command enables you to view and edit the values, options and parameters of the current CAM-Part. The Milling Part Data dialog box is displayed. CAM-Part Properties This command displays the Milling part properties dialog box. This dialog box provides you with information such as name and location of the CAMPart and of the model used in the CAM-Part.
94
2. CAM-Part
Save As This command enables you to save the active CAM-Part to the disk with a new name or in a new location. When this option is chosen, the Save As dialog box is displayed. Save as Type This option enables you to choose the type of the CAM-Part: compressed or non-compressed. The default value of the Save as Type filter is the same as the type of the original CAM-Part. The conversion of the compressed CAM-Part to non-compressed is unavailable. Save as copy When this option is not available, the saved CAM-Part is loaded instead of the current CAM-Part. When this option is available, SolidCAM stays with the current CAM-Part. Recent CAM-Parts This option displays a list of the last nine CAM-Parts you worked with in SolidCAM. You can open the file by clicking on its name.
95
Saving the updated stock in the STL format SolidCAM parts can be machined in a sequence of stages on different CNC-machines, while the updated stock model is shared between these stages. This functionality enables you to define a new CAM-Part based on some other pre-machined CAM-Part, using the result of machining of the pre-machined part for the stock definition. Machining of a part can thus be performed in several stages, with one CAM-Part for each stage, by passing the machining results from one stage to the next through an updated stock model obtained after the last operation of each CAM-Part and saved in the STL format. 1. Right-click on the CAM-Part header in SolidCAM Manager and choose the Save updated stock to STL command from the menu. 2. The Save updated stock to STL dialog box is displayed. Define the name and location for your file. The default name of the updated stock model STL file is inherited from the CAM-Part name. The default location of the STL file is the SolidCAM Part folder for regular SolidCAM Parts (*.prt). For compressed CAM-Parts (*.prz), the default location is that of the compressed CAM-Part files. 3. Click on the Save button. SolidCAM generates the STL file according to the HostCAD coordinate system. When the STL file is successfully generated, the notification message is displayed.
96
2. CAM-Part
This option enables you to edit the document after it has been generated.
This page shows contents of the Cover page file defined in SolidCAM Settings.
Header page
This page contains general information about the CAM-Part: the CAM-Part name, the program number, the amount of operations and the type of operations. To edit, simply click in the right field and make any changes or additions.
97
This page contains all the relevant information about the tools used in the CAM-Part: the tool number, the tool diameter, the corner radius, the tool type, the number of teeth and any other information that is relevant to each tool. To edit, simply click in the right field and make any changes or additions.
Operation pages
Under this page, there is a page for each operation name. This page gives you a detailed list of all of the fields you have chosen in the operation and their values.
98
2. CAM-Part
99
Images In this section, you can specify the logo and part image files in the PNG format that will be attached to your tool sheet. To attach a logo and/or a part image, click on the button and choose a file from the standard Windows-style Browse dialog box.
The attached logo appears in the upper right corner in the document header. The attached images appear in the separate Images page.
100
2. CAM-Part
Parameters
This section contains the table that enables you to define your own variables and values to be inserted into the tool sheet. In the Label column, you specify the name of the parameter you want to appear in the tool sheet; in the Value column, you can enter its value. In the Location column, you can specify where this parameter is supposed to appear in the documentation file, either in the main page or in the header. The buttons enable you to manage the table rows: The The The Part notes button adds new rows to the table. button removes the selected row from the table. buttons move the selected rows in the table, changing their order.
This section enables you to add comments and notes related to your part. The note will appear under the part image, in the main page of the tool sheet document. Style
This section enables you to define the style of the output document. Sections This group enables you to define which elements of the information sheet will appear in the output, by selecting the corresponding check boxes. The Main page check box defines whether the main page will be included in the tool sheet.
101
The Images check box defines whether the Images page will be included in the tool sheet. The Explorer. button displays the location of the part captured images in the Windows
The Tool table check box defines whether the Tool table pages will be included in the tool sheet. The button displays the dialog box that enables you to specify the required tool data to appear in the Tool table summary by selecting check boxes.
The Operations summary check box defines whether the Operation summary page will be included in the tool sheet. The Fixtures check box defines whether the Fixture page will be included in the tool sheet.
102
2. CAM-Part
Part picture
103
Tool table This section displays the list of the tools used for the operations of the current CAM-Part, with their parameters and illustrations.
104
2. CAM-Part
Operations summary This section summarizes the operations defined for the current CAM-Part.
105
Fixtures This section shows how the part must be fixed on the CNC-machine table.
106
2. CAM-Part
This command enables you to display the last generated tool sheet for the current part, instead of generating it anew. The Tool Sheet Extra Parameters dialog box is displayed so that you can view the defined parameters of the last tool sheet generation. In this dialog box, you can edit only the Style and the Sections parameters to alter the document appearance and define which sections of the last tool sheet you want to display. The Show button displays the generated tool sheet.
107
2. The New Milling Part dialog box is displayed and enables you to choose an STL file similar to the CAD design file chosen for CAM-Part definition.
3. In the Directory section, you need to specify the path to the location where the CAM-Part will be saved by entering manually or by clicking on the Browse button.
108
2. CAM-Part
4. In the Model name section, click on the Browse button and choose the required STL file. 5. In the Name section, you need to enter the name for your machining project. When you confirm the New Milling Part dialog box, the Milling Part Data dialog box is displayed as for a regular milling project definition. The graphic body is displayed in the SolidWorks graphic area. It can be zoomed and rotated.
109
110
2. CAM-Part
When the CAM-Part is defined, you can add 3D Milling, HSM, HSS and 5-Axis operations for its machining.
111
Change Reference Model Copy of CAM-Part Modied model Synchronize & Calculate
Modied CAM-Part
112
2. CAM-Part
After this stage, DriveWorks automatically starts SolidCAM, where the original part is copied into the same location with the updated model. The copied CAM-Part is opened in SolidCAM and the reference model of the opened CAM-Part is automatically replaced with the modified model, the synchronization is automatically performed and the operations are recalculated.
In such manner, machining of new parts with different parameters and features can be performed automatically using the defined modification rules. For more information about the DriveWorks software, visit www.driveworks.co.uk.
113
114
The tool commands can be used to create and manage tools and tool libraries in SolidCAM. You can save your programming time if you save the tools you use most often in customizable tool libraries. The tool libraries can be based on machine tooling, materials or any other personal criteria. When you define your machining operations, you can then load the tool, and all its parameters, feed and spin values are automatically copied into the operation.
Working with Part Tool Table Working with Current Tool Library Managing Tool Libraries Defining tools Tool types Shaped tools Tool holding system
116
Diameter
The diameter and the length of the cylindrical arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. When a new tool is created, the default value of the Arbor Diameter is equal to that of the Diameter, and the default value of the Shoulder Length is equal to that of the Cutting Length.
117
Diameter
Corner Radius
The Corner Radius value of a Ball nose mill tool is equal to half the Diameter value and cannot be changed. The diameter and the length of the cylindrical arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. When a new tool is created, the default value of the Arbor Diameter is equal to that of the Diameter, and the default value of the Shoulder Length is equal to that of the Cutting Length.
118
Diameter
Corner Radius
The Corner Radius value of a Bull nose mill tool must be in the range from 0 to half the Diameter value. The diameter and the length of the cylindrical arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. When a new tool is created, the default value of the Arbor Diameter is equal to that of the Diameter, and the default value of the Shoulder Length is equal to that of the Cutting Length.
119
Corner Radius
Diameter
Parameter limitations Parameter Angle Corner Radius Cutting Length Shoulder Length Outside Holder Length Range 0 < Angle < 90 Corner Radius <= Diameter/2 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
120
Arbor Diameter
Total Length
Shoulder Length
Cutting Length
Parameter limitations Parameter Tip Diameter Angle Corner Radius Cutting Length Shoulder Length Outside Holder Length Range Tip Diameter < Diameter 0 < Angle < 90 Corner Radius <= Cutting Length Corner Radius <= Tip Diameter/2 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
121
Arbor Diameter
Total Length
Diameter
Cutting Length
122
Cutting Length
Corner Radius
The default Arbor Diameter value is equal to that of the Diameter; The Shoulder Length value is equal to that of the following expression:
Cutting Length + (Outside Holder Length Cutting Length)/2.
To define the taper tool by Tip diameter or by Cone Length, select the appropriate check box near the Tip Diameter or the Cone Length edit boxes. When the Tip Diameter check box is selected, the Cone Length check box is unselected and the relevant edit box is disabled; the Cone Length value is thus automatically calculated.
123
When the Cone Length check box is selected, the Tip Diameter check box is unselected and the relevant edit box is disabled; the Tip Diameter value is thus automatically calculated. Note that the Tip Diameter is the diameter of the virtual intersection of the conical shape with the bottom plane.
Tip Diameter
Parameter limitations Parameter Tip Diameter Angle Corner Radius Cutting Length Shoulder Length Outside Holder Length Range Tip Diameter < Diameter 0 < Angle < 180 Corner Radius <= Tip Diameter/2 Corner Radius < Cone length Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
124
Arbor Diameter
Total Length Outside Diameter Holder Shoulder Length Length Cutting Length Tip Diameter
Parameter limitations Parameter Angle Corner Radius Cutting Length Shoulder Length Outside Holder Length Range 0 < Angle < 90 Corner Radius <= Diameter/2 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
125
Diameter
Tip Diameter
The diameter and the length of the cylindrical tool arbor are defined as Arbor Diameter and (Total Length - Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. The default Arbor Diameter value is equal to that of the Diameter, and the Shoulder Length value is equal to that of the Cutting Length. Parameter limitations Parameter Tip Diameter Chamfer Length Pitch Cutting Length Outside Holder Length Range Tip Diameter < Diameter Chamfer Length < Cutting Length 0 < Pitch < min (Diameter, Cutting Length) Cutting Length <= Outside Holder Length Outside Holder Length <= Total Length
Total Length
Total Length
Lollipop mill without conical shoulder When the Conical shoulder check box is not selected, SolidCAM enables you to define the tool with the cylindrical shoulder. The diameter and the length of the cylindrical arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. The default Arbor Diameter value is equal to that of the Diameter. The Shoulder Length value is equal to that of the Cutting Length.
127
Lollipop mill with conical shoulder When the Conical shoulder check box is selected, SolidCAM enables you to define the tool with the conical shoulder. The Arbor diameter value defines the upper diameter of the cone. The lower diameter of the cone is calculated automatically as the diameter of the circle resulting from section of the sphere by the horizontal plane located at the Cutting length distance from the tool nose. The cone starts from the Cutting length distance and continues till the Shoulder length distance. Therefore, the cone length is equal to the difference between the Shoulder length and Cutting length parameters. Parameter limitations Parameter Cutting Length Shoulder Length Outside Holder Length Range Cutting Length <= (Diameter+sqrt(Diameter^2-Arbor Diameter^2))/2 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
128
Arbor Diameter
Total Length
Thread Diameter
Pitch SolidCAM enables you to define the Pitch of the thread as a Metric value (MM) or as a number of tracks per inch (TPI). When defining the tool parameters in the Part Tool Table, you can define the Pitch in accordance with international standards such as ISO, Whitworth, and so forth. In the Pitch/Standard field, choose the Table option and click on the arrow to open the list and choose the standard according to which you want to define the thread pitch. This list is available only if the Threading table is defined in the SolidCAM Settings dialog box (see topic 12.2.3). When you choose one of the standards from the list, the corresponding table is displayed in a separate window.
129
Choose the required value and confirm with the OK button. You can open this table as an Excel file and edit its content. The path to the table file can be found on the User directories page of the SolidCAM Settings dialog box (see topic 12.2.3). SolidCAM provides you with a link to the Vardex software for thread milling tool selection from the Vardex tools library TM Gen (www.vardex.com). This link enables you to define the thread mill tool parameters and, based on this, it will search the Vardex library for the thread milling tools that fit these parameters; you can then choose one of the offered tools for the operation. When the Vardex option is chosen in the Standard combo box, SolidCAM launches the Vardex tool library wizard (TM Wizard). The wizard guides you through the steps to define the parameters of the tool you are looking for, selects a number of tools from the library that fit these parameters and then enables you to choose one of these tools. When the tool is chosen, it is imported into the SolidCAM tool library.
130
Arbor Diameter
Thread Diameter
3.1.13 Drill
This tool type is used for the definition of drills, bores, reams, threading tools, etc. A tool of this type is defined with the parameters shown in the image.
Total Length Shoulder Length Arbor Diameter
Diameter
The diameter and the length of the cylindrical tool arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value should be greater than or equal to the Cutting Length value, and equal to or smaller than the Outside Holder Length value. When a new tool is created, the default Arbor Diameter value is equal to that of the Diameter. The default Shoulder Length value is equal to that of the Cutting Length.
131
Tip Diameter
Tip Length
When this tool is used in combination with the Use chamfer option, SolidCAM calculates the drilling depth according to the following expression:
Drilling Depth = Tip Length + Arbor Diameter/2 + cotan(Shoulder Angle/2)
Arbor Diameter
Tip Length
Parameter limitations Parameter Tip Diameter Tip Angle Shoulder Angle Tip Length Cutting Length Outside Holder Length Range Tip Diameter < Arbor Diameter 0 < Tip Angle < 180 0 < Shoulder Angle < 180 Tip Length <= Cutting Length Cutting Length <= Outside Holder Length Outside Holder Length <= Total Length
The length of the conical part defined by Tip Diameter and Tip Angle must be equal to or smaller than the Tip Length value. The length of conical part can be calculated according to the following expression: Cone Length = Tip diameter/(2*tan( Tip angle/2)).
133
Arbor Diameter
Cutting Length
Parameter limitations Parameter Angle Tip Length Cutting Length Outside Holder Length Range 0 < Angle < 180 Tip Length <= Cutting Length Cutting Length <= Outside Holder Length Outside Holder Length <= Total Length
Note that the Cutting Length edit box is unavailable. This value is calculated automatically according to the Diameter and Angle values.
134
Arbor Diameter
Diameter
Parameter limitations Parameter Corner Radius Angle Cutting Length Shoulder Length Outside Holder Length Range Corner Radius <= Cutting Length 0 < Angle < 180 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
135
3.1.17 Reamer
This tool is used to machine precise holes in Drilling operations. A tool of this type is defined with the parameters shown in the image.
Total Outside Length Holder Length
Arbor Diameter
Cutting Length
Diameter
Chamfer Length
The diameter and the length of the cylindrical tool arbor are defined as Arbor Diameter and (Total Length Shoulder Length), respectively. The Shoulder Length value must be greater than or equal to that of the Cutting Length, and equal to or smaller than that of the Outside Holder Length. The default Arbor Diameter value is equal to that of the Diameter. Parameter limitations Parameter Cutting Length Shoulder Length Outside Holder Length Range Chamfer Length <= Cutting Length <= Outside Holder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
136
3.1.18 Bore
This tool type is used for boring in Drilling operations. A tool of this type is defined with the parameters shown in the image.
Outside Holder Length Diameter Shoulder Length
Arbor Diameter
Total Length
Angle
Parameter limitations Parameter Corner Radius Angle Cutting Length Shoulder Length Outside Holder Length Range Corner Radius <= Cutting Length 0 < Angle < 90 Cutting Length <= Shoulder Length Shoulder Length <= Outside Holder Length Outside Holder Length <= Total Length
137
2. In the Tool Type Names dialog box, right-click on an existing tool type name, e.g. End Mill. 3. Choose Add from the menu. 4. A new entry is created. Enter the name of the user-defined tool type. 5. By default, the new entry is of the Drill tool type. Right-click on the Drill field and select the relevant tool type from the list.
138
6. When you finished making changes in the Tool type list, click on the Save button to confirm your changes. Double-click the tool type name to rename existing entries.
139
Generally, the Machine Tool Table contains the tools situated in the Tool Magazine of the specified CNC-machine. SolidCAM enables you to define any number of Tool Libraries. Each tool from the Tool Libraries can be imported into the Part Tool Table. You can define one Tool Library that has a top priority in the list for import: the Current Tool Library.
Operation Operation Operation
Tool
Tool
Tool
CAM-Part
Tool Library
Tool Library
140
141
This option enables you to set the Current Tool Library. You have to specify the type of the Current Tool Library (Milling, Turning or Turn-Mill) and choose the relevant Tool Library from the browser dialog box. The Current Tool Library is selected and displayed in the Tool Table dialog box (see topic 3.6).
Close Tool Library
This option enables you to close the Current Tool Library. This option is available only when the Current Tool Library is already defined.
Show Tool Library
This option enables you to display the content of the Current Tool Library. The Tool Table dialog box enables you to manage the tools in the Current Tool Library. This option is available only when the Current Tool Library is already defined.
Recent Tool Libraries
This option displays the list of recently loaded Current Tool Libraries. You can open a file by simply clicking on its name in the list. The Tool Table dialog box is displayed.
142
143
3. Confirm the Tool Library creation with the OK button. The Tool Library is created. The Tool Table dialog box is displayed enabling you to add tools to the new Tool Library. 4. Confirm the Tool Table dialog box with the OK button.
1. Select the tool libraries you want to delete. Use the Ctrl key to select several tool libraries together. 2. Click on the Delete button. 3. The confirmation message is displayed:
145
This page displays the tools of the Tool Library in a table format.
Edit
This page enables adding of new tools or editing of existing tools in the Tool Library.
Only the tools used in Operations of the current CAM-Part are displayed.
Unused
Only the tools unused in operations of the current CAM-Part are displayed. The filter is available only for the Part Tool Table.
146
The Taper angle section enables you to choose the range using the taper angle of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have a taper angle from 20 to 30, enter 20 in the From box and 30 in the To box. The Number of threads section enables you to choose the range using the number of threads of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools with 2 to 4 threads, enter 2 in the From box and 4 in the To box. The ID number section enables you to choose the range of the ID numbers of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools with an ID number from 10 to 100, enter 10 in the From box and 100 in the To box. The Corner radius section enables you to choose the range using the corner radius of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have a corner radius from 0 to 4, enter 0 in the From box and 4 in the To box. The Angle section enables you to choose the range using the angle of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have an angle from 90 to 180, enter 90 in the From box and 180 in the To box. The Chamfer length section enables you to choose the range using the chamfer length of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have a chamfer length from 2 to 5, enter 2 in the From box and 5 in the To box. The Tip diameter section enables you to choose the range using the tip diameter of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have a tip diameter from 5 to 10, enter 5 in the From box and 10 in the To box. The Tip length section enables you to choose the range using the tip length of the tools you would like to have listed in the tool library. If, for example, you would like to list the tools that have a tip length from 5 to 10, enter 5 in the From box and 10 in the To box. Click on the Execute button to start searching the tool library for the tools that meet your requirements. SolidCAM will return to the tool library and display the result of the range search. The Reset to defaults button returns you to the original program settings of this dialog box.
3.6.3 Show
This button enables you to display the selected tool.
148
3.6.4 View
Tool data This page displays the tool data in the table format. The table contains the following columns:
Tool Number
This column displays the description of a tool. This page also displays the geometric parameters of a tool depending on its type.
3.6.5 Edit
This page enables you to edit the existing tools in the Tool Library (see topic 3.7).
149
Rough tools SolidCAM enables you to define rough tools of all the following types: End mill Bull nose mill Ball nose mill Face mill Taper mill Slot mill Drill Bore Dove tail mill The Rough check box enables you to mark the tool as suitable for rough milling. The Rough status of the tool can be used for the tools sorting with the Range option (see topic 3.6.2).
Tool units You can assign different unit of measurement data for each tool in the tool library. The tool library can simultaneously store tools with Metric parameters along with those defined in Inches. This functionality enables you to use tools defined in units different from those of the CAM-Part, without converting the tool parameters into the CAM-Part units. You can choose the units for the tool diameter values and tool lengths separately. The Mm and Inch buttons enable you to switch between the Metric and the Inch system of measurement.
150
When a tool library created in a previous SolidCAM version is loaded, the following message is displayed:
When you confirm this message, the Assign Units dialog box is displayed so that you can assign units for tools.
Angular dimensions The button appears in the parameters with angular values. By clicking this button, you can switch the angle value from the degrees/ minutes/seconds format to the decimal format and vice versa. In the first case, the edit box that displays the value is disabled. When the value is displayed as a decimal, the edit box is available, and the value can be edited.
151
Permanent Tool
If a particular tool is always used in the same magazine position in the machine, this tool can be marked as Permanent Tool. If you use the Tool Renumbering function, a tool marked as Permanent Tool is not renumbered.
Add Tool
This option enables you to add a new tool to the tool library. When you choose this option, the Tool Type dialog box is displayed so that you can choose the tool type. When you click on a tool to add it to the library, the Tool Type dialog box is closed automatically and the Part Tool Table is displayed again.
152
This option enables you to add the type of the existing tool. When you choose this option, the Tool Type dialog box is displayed so that you can choose the required tool type.
Copy Tool
This option enables you to perform automatic tool renumbering. When the tool numbers in the list are not sequential increments of 1, this option enables you to renumber the tools sequentially by increments of 1. The tools can also be renumbered starting from a specific number that you choose. 1. Right-click on a tool in the list and choose the Renumber Tools command, from the menu, or click on the Renumber button at the bottom of the dialog box. 2. You are prompted to enter a new number for the first tool.
The Sort by option enables you to assign numbers to tools according to the operation sequence or the Tool sequence. When you confirm the Tools Renumbering dialog box, the tools are renumbered accordingly, starting from the number of the first tool.
153
3. Recalculate the CAM-Part. The CAM-Part must be recalculated to ensure that the GCode contains the correct tool number for each operation. A tool marked as Permanent tool is not renumbered.
Import Tool
This option enables you to import tools to the Tool Library from the Current Tool Library or any other Tool Library. The Tool Libraries list is displayed. The Current Tool Library, which is the first in the list, is automatically chosen.
You can choose the location of the Tool Libraries for the tools import.
The Library name box enables you to choose the Tool table for the tools import. The File type box enables you to import tools from SolidCAM Tool libraries, Excel files and from CSV files. If the Current Tool Library is defined, it is automatically chosen as a source for tool import. The Tool list displays all the tools contained in the specified tool library. The right-click menu is available. The Copy to Table option imports the selected tools to the Tool Library. To import all tools from the list, click Copy all to Table.
154
This option enables you to update the Machine Tool Table with the tools of an active Tool Library. This option is available only when: The Tool Table dialog box is loaded outside the operation. The Machine Tool Table is defined in the MAC file. The Update to Machine tool table dialog box is displayed. This dialog box displays the name of the Machine Tool Table. The Used Tools only option enables you to update the Machine Tool Table only with the tools used in operations. Update of the tools is affected by the Tool search parameters defined in the SolidCAM Settings. The system compares the tool parameters with corresponding check boxes selected and performs the update accordingly.
Export all tools
This option enables you to export all the tool data to an Excel-compatible file (*.xls, *.csv).
This option enables you to export the data of the selected tools to an Excel-compatible file.
155
Tool material
Tool Holder
Geometry denition
R D
The Tool Data area displays the parameters of the selected tool.
156
The Tool Topology page contains the Topology data of the tool, such as diameter, length, angle, corner radius, etc. The Default Tool Data page contains the default Tool Material data, Feed and Spin data and diameter and length offset numbers. The Tool Message page contains fields, in which user messages are entered. The Tool Coolant page enables you to choose the coolant options that will be used by default for the current tool. The Holder page enables you to define the tool holder by choosing it from the global or local tool table and specifying the related parameters. The Shape page enables you to choose a shaped tool for the operation.
Tool number The Tool number is a numerical identifier of the tool, i.e. the numerical name of the tool, whose value has to be an integer. It enables you to define tool numbers according to the numbering system that you are used to. The Tool number is used in the GCode when the tool changes, the tool length and radius values for tool compensation (G4x) are read from the machine controller. The Max_Tool_Number parameter in the MAC file defines the total number of tools that can be defined. In other words, this parameter defines the capacity of the cutter magazine of your CNCmachine.
157
SolidCAM checks the total number of tools in the Part Tool Table during the following operations: Adding, copying or importing tools; Loading the CAM-Part; Inserting Machining Process; Creating new tools by AFRM. When the total number of tools exceeds the Max_Tool_Number, SolidCAM displays an error message. The Tools in list field displays the total number of tools defined in the Tool Library. ID number You can use any number, e.g. the catalog number of the tool to facilitate its identification. When a new tool is defined, SolidCAM sets the Tool number to the first unused number. This default Tool number can be changed. When you change the Tool number, make a note that this parameter has to be unique for each tool. If a particular tool always has the same number and cannot be changed, this tool can be marked as Permanent. For example, when the Tool number represents the number of a tool magazine pocket used for the tool, the Permanent mark means that the tool is always located in this pocket. If you use the Tool Renumbering function (see topic 3.7), a tool marked as Permanent is not renumbered. Diameter This field defines the cutting diameter of the tool. Corner Radius/Angle When the tool type is End mill/Ball nose mill/Bull nose mill, the Corner Radius field is displayed. When the tool type is Drill, the Angle field is displayed.
158
This field defines the corner radius of the tool. There are three possibilities:
In Ball nose mills, the In Bull nose mills, the corner In End mills, the corner corner radius is equal to the radius is smaller than the radius is zero. radius of the tool. radius of the tool.
Angle
This field defines the drill point angle of the tool (between 0.01 and 180 degrees). Arbor diameter This field defines the diameter of the tool arbor.
A
Arbor diameter
This parameter is relevant only for Slot, Lollipop and Taper tools.
Thread diameter This field defines the diameter of the thread of the Tap tool. Tip Diameter This field defines the lower diameter of the conical part of the Tap tool.
159
Chamfer length This field defines the length of the conical part of the Tap tool. Pitch This field defines the pitch of the Tap tool. The Pitch is the distance between corresponding vertices of adjacent teeth of a thread. The Thread diameter, Tip diameter, Chamfer length and Pitch parameters are relevant only for Tap tools. Length This field defines the length of the tool. In milling calculations, the system does not use this data; the length of the tool is only the output to the GCode file.
Total Length
Chamfer Length Cutting Length Total Length
Total
160
Spindle
The distance from the tool end to the CNC-machine spindle. Number of flutes This field defines the number of teeth of the tool. This field is used when calculating the feed in the Feed rate type FZ. the Number of always 1. The value cannot be edited. Description This field enables you to enter a description of the tool (up to 40 characters). For Tap tools, flutes value is
Tool Holder
H length
Tool material This field describes one or more of the following properties of the tool: The Material of the tool (High Speed Steel, Carbide, etc.); The Working conditions of the tool; The Use of the tool (rough, finish, etc.).
161
The Tool material is used to define the Speed and Feed defaults. When you choose the Tool material, the feed type is changed to FZ and the spin type to V. The Feed and Spin values are default system values since the Work material has not been defined yet. Loading the tool to an operation connects the Tool material to the Work material and the correct Feed and Spin values are loaded from the Speed/Feed defaults table. For Tap tools, the FZ value does not depend on the Tool Material. The Spin Rate value can be customized for different Tool Materials. In this case, changing the Tool Material changes the Spin Rate. Since the Spin Rate value is part of the formula of the F calculation, the F parameter value has to be recalculated. Spin This field defines the spinning speed of the tool. It defines two spin values: Spin Rate Normal spin rate; used in rough milling. Spin Finish Finish spin rate; used in finish milling. The Spin finish check box enables you to optionally define different values for Spin rate and Spin finish. When this check box is selected, the corresponding edit box is available so that you can edit its value. When this check box is not selected, the specified Spin rate value is used for both rough and finish machining.
For Drill and Tap tools, the Spin Finish parameter is not relevant. The spin value can be defined in two types of units: S and V.
S is the default and it signifies Revolutions per Minute. V signifies Material cutting speed in Meters/ Minute in the Metric system or in Feet/Minute in the Inch system; it is calculated according to the
following formula:
Feed This field defines the feed rate of the tool. It defines three feed values: Feed XY Feed rate in the XY plane. Feed Z Feed rate in the Z direction. Feed Finish Feed rate used for finish milling.
162
The Feed finish check box enables you to optionally define different values for Feed XY and Feed finish. When this check box is selected, the corresponding edit box is available so that you can edit its value. When this check box is not selected, the specified Feed XY value is used for both rough and finish machining. For Drill and Tap tools, the Feed XY and Feed Finish parameters are not relevant. The feed value can be defined in two types of units: F and FZ.
F is the default and it signifies Units per minute. FZ signifies Units per tooth and is calculated according to the following formula: FZ = F/(Number of Flutes * S)
For Tap tools, SolidCAM automatically calculates Feed Z (F and FZ) according to the following formulas:
F=Spin Rate * Pitch FZ=Pitch
Calculated values are displayed in Feed Z field. These values cannot be changed. The F/FZ buttons enable you to check the parameter values. 3D Model - entry only When this check box is selected, the defined Feed Z is used for vertical movements only. When this check box is not selected, the defined Feed Z is used for all movements when the Z-coordinate changes. This option is available only for 3D Milling operations. Diameter offset number This parameter defines the number of the Diameter Offset Register of the current tool in the Offset table of the CNC-machine. Length offset number This parameter defines the number of the Length Offset Register of the current tool in the Offset table of the CNC-machine.
163
Second offset number This parameter defines the register number of the upper cutting face offset, in the offset table of the CNC-machine. This option enables SolidCAM to automatically take into account the minor size differences between the defined tool and the one actually used for cutting the workpiece, if there are any. You may choose not to use this option by clearing the check box. This option is available only for T-Slot operations.
164
This page enables you to choose the tool holder parts from the tool holders table (for more information on the tool holders use, see topic 3.9). To activate the options, select the Use Holder check box. The tool adaptor is defined in the MAC file according to your CNC-machine. If the tool adaptor is not described in the MAC file, the first tool adaptor from the table is used. Global holders table The Tool Holders dialog box is displayed so that you can choose the tool holder components from the Global holders table. The selected tool is copied to the Local holders table related to the current CAM-Part, and its parameters are displayed in the Tool adaptor and Tool extension fields after you confirm the Tool Holders dialog box. Local holders table This option enables you to choose the tool holder component previously used in the current CAMPart from the Local holders table. The Tool Holders dialog box is displayed. The parameters of the selected tool are displayed in the Tool adaptor and Tool extension fields after you confirm the Tool Holders dialog box. Shape Edit This option enables you to change dimensions of the selected clamping adaptor. The Tool Holders dialog box is displayed. Click on the Edit page to modify the parameters of the tool holder.
165
This page enables you to choose the coolant options that will be used by default for the current tool. When a tool is chosen for use in a specific operation, the default coolant options are automatically applied to the tool use in this operation. The tool coolant options can be changed for each operation. All the existing coolant types are listed with corresponding check boxes. When a check box is selected, the related coolant option is used. The coolant options available for use on the current CNC-machine, according to the MAC-file settings, are marked with asterisks (*). The Minimum Quantity Lubrication edit box is enabled only when the corresponding check box is selected. The default value of this parameter is 0; the possible values are integers in the range from 0 to 99999. When the entered value is out of range, the error message is displayed.
When a new tool is defined, it is assigned the default tool coolant options according to the following rules: When a tool is created in the Part Tool Table, it is assigned the options according to the Part Settings. When a new tool is defined not in context of CAM-Part (all the tool tables except for the Part Tool Table), it is assigned the options according to the SolidCAM Settings.
166
When a tool is defined in the Part Tool Table with the coolant options not supported by the current CNC-machine, a notification message is displayed when you confirm the Part Tool Table dialog box.
The Yes button returns you to the Part Tool Table dialog box to edit the coolant options. The No button confirms the defined coolant options and continues the process. The GCode will not be generated for the tool coolant options that are not supported.
This page enables you to choose the shaped tool from the local/global shaped tools table (for more information on the shaped tools use, see topic 3.10). To activate the options, select the Use Shape check box. Global shaped tools table The Shaped tools dialog box is displayed enabling you to choose the shaped tool from the Global shaped tools table. The selected tool is copied to the Local shaped tools table related to the current CAM-Part, and its parameters are displayed in the Group name and Shape name fields after you confirm the Shaped tools dialog box.
167
Local shaped tools table This option enables you to choose the previously used in the current CAM-Part shape tool from the Local shaped tools table. The Shaped tools dialog box is displayed. The parameters of the selected tool are displayed in the Group name and Shape name fields after you confirm the Shaped tools dialog box. Shape Edit This option enables you to change dimensions of the selected shape tool. The Shaped tools dialog box is displayed. Click on the Edit page to modify the parameters of the tool. STL This option enables you to export tools saved in the STL format. The Export Tool dialog box is displayed.
168
Tool
169
3. The Tool Holders dialog box is displayed. A CAD model file is also displayed so that you can define the geometry of the new holders.
Tool holder component tables The first list displayed above enables you to define and manage your tool adaptors. 1. Right-click on the item name in the table.
This option enables you to define the geometry of the new tool adaptor that will be added to the table. The Holder Geometry dialog box is displayed.
Generate
This option generates the sketch in the model file with the geometry of the selected tool adaptor.
Replace
This option enables you to replace the existing tool adaptor geometry with a new one. The Holder Geometry dialog box is displayed. Select the new geometry.
Delete
This option enables you to remove the tool adaptor part from the list.
Rename
This option enables you to assign a new name to the tool adaptor.
170
This option enables you to create a copy of the existing tool adaptor. The second list enables you to define and manage groups of reductions and extensions such as collet chucks, arbors, shanks, etc. 1. Right-click on the group/component name in the table.
This option enables you to create a group of components and to define separate groups for tool holders components of the same type.
Add Holder Component
This option enables you to define the geometry of the new component that will be added to the current group of the parts table. The Holder Geometry dialog box is displayed.
Generate
This option generates the sketch in the model file with the geometry of the selected tool holder.
Replace
This option enables you to replace the existing holder geometry with a new one. The Holder Geometry dialog box is displayed. Select the new geometry.
Delete
This option enables you to remove the tool holder component from the list.
Rename
This option enables you to assign a new name to the tool holder component or group.
171
Copy
This option enables you to create a copy of the existing tool holder component. Description SolidCAM enables you to type a brief description of the tool holder component (reduction or extension). Show page This page enables you to see a 3D model of the tool holder. In the graphic area of this page you can rotate, zoom and pan the 3D model of the tool holder. Use the following combinations: Middle mouse button Rotation of tool holder Shift + Middle mouse button Zoom of tool holder Ctrl + Middle mouse button Pan of tool holder Edit page This page enables you to edit the parameters of the selected tool holder component. 1. Select the tool holder component. 2. Switch to the Edit page to change the dimensions of the tool holder component. The interactive picture of the selected tool holder component is displayed. The parameters pages are located below the picture. SolidCAM divides the tool holder component into solid segments like cylinders, cones or toruses. For each solid primitive, SolidCAM determines the actual dimensions. For more information on this subject, see topic 3.9.3. You can change the dimensions of each segment with its specific page. 1. Select the segment on the picture or through the tabs below the picture. 2. Type the new value of the parameter in the value field.
172
Replace chain This command enables you to replace a chain in the current chain geometry. Edit chain This command enables you to update a chain in the current chain geometry. Reference point This option enables you to define the reference point through which the rotation axis of the tool holder component passes.
Diameter Height
Height
173
Cone
Angle
The following rules apply when parameters are changed: Changing of the Angle causes Top Diameter change Changing of the Bottom Diameter causes Height change Changing of the Top Diameter causes Bottom Diameter change Changing of the Height causes Bottom Diameter change Torus
Top Diameter Radius Start Angle Sweep Bottom Diameter
Bottom Diameter
The following rules apply when parameters are changed: Changing of the Radius causes Bottom Diameter change Changing of the Top Diameter causes Bottom Diameter change Changing of the Bottom Diameter causes Top Diameter change Changing of the Start Angle causes Bottom Diameter change Changing of the Sweep Angle causes Top Diameter change
174
Note that the tool adaptor section is inactive and you cannot select the adaptor type. SolidCAM enables you to define the Tool adaptor in the MAC file with the following string:
mac_holder = BT45
If the parameter is not defined in the MAC file, SolidCAM will use the first adaptor from the list; the extenders are the same for all the adaptors. If all your machines use the same type of adaptor, you do not need to define the mac_holder parameter. In the table, drag and drop the requested adaptor to the first place on the list. In the Show area, SolidCAM displays the 3D model of the selected tool holder. In the graphic area of this page you can rotate, zoom and pan the 3D model of the tool holder. Use the following combinations: Middle mouse button Rotation of tool holder Shift + Middle mouse button Zoom of tool holder Ctrl + Middle mouse button Pan of tool holder
175
Holders Edit dialog box The Holders Edit dialog box enables you to edit the dimensions of the selected tool holder component. This dialog box contains two tabs: Show This page displays a 3D model of the selected tool holder component. In the graphic area of this page you can rotate, zoom and pan the 3D model of the tool holder. Use the following combinations: Middle mouse button Rotation of tool holder Shift + Middle mouse button Zoom of tool holder Ctrl + Middle mouse button Pan of tool holder. Edit The interactive picture of the selected tool holder component is displayed. The tool holder component is divided into segments such as cylinders, cones and toruses. The Parameters table below the picture enables you to edit the actual dimensions of the tool holder component. 1. Select the holders element on the picture or through the parameter pages. 2. Type the new value of the parameter in the value field.
176
Choose the SolidCAM item from the SolidWorks Shaped tools item from the Tool Library submenu. The Shaped Tools dialog box is displayed. A CAD model file is also displayed so that you can define the geometry of new shaped tools.
177
Tool list This field displays the database of shaped tools defined in SolidCAM. With this list you can define and manage shaped tools. 1. Right-click on any item in the browser field of the Shaped Tools dialog box. The following menu is displayed. 2. Choose the specific command from the menu.
Add Group
This option enables you to create a group of shaped tools. You can define separate groups for shaped tools of the same type.
Add Tool
This option enables you to define the geometry of the newly shaped tool that will be added to the current group of the shaped tools table. The Shaped Tool Geometry dialog box is displayed.
Generate
This option generates a sketch in the model file with the geometry of the selected shaped tool.
Replace
This option enables you to replace the existing shaped tool geometry with a new one. The Shaped Tool Geometry dialog box is displayed. Select the new geometry.
Delete
This option enables you to remove the shaped tool from the database.
Rename
This option enables you to assign a new name to the selected shaped tool or group.
Copy
This option enables you to create a copy of the selected shaped tool.
178
Description You can place a brief description of the shaped tool here. Show page This page displays a 3D model of the selected shaped tool. In the graphic area of this page you can rotate, zoom and pan the 3D model of the shaped tool. Use the following combinations: Middle mouse button Rotation of tool Shift + Middle mouse button Zoom of tool Ctrl + Middle mouse button Pan of tool Edit page This page enables you to edit the parameters of the selected shaped tool. 1. Select the Shaped tool. 2. Switch to the Edit page to change the shaped tool dimensions. The interactive picture of the selected shaped tool is displayed. The parameters pages are located below the picture. SolidCAM divides the tool into solid segments like cylinders, cones or toruses. For each solid primitive, SolidCAM determines actual dimensions. You can change the dimensions of each segment in its specific page. 1. Select the tools element on the picture or through the parameter pages. 2. Type the new value of the parameter in the Value field.
179
Replace chain This command enables you to replace a chain in the current chain geometry. Edit chain This command enables you to update a chain in the current chain geometry. Reference point This option enables you to define the reference point through which the rotation axis of the shaped tool passes.
Diameter
Height
Diameter Height
180
Cone
Angle
Top Diameter
Height
Bottom Diameter
The following rules apply when parameters are changed: Changing of the Angle causes Top Diameter change. Changing of the Bottom Diameter causes Height change. Changing of the Top Diameter causes Bottom Diameter change. Changing of the Height causes Bottom Diameter change Torus
Top Diameter Radius Start Angle Sweep Bottom Diameter
Bottom Diameter
The following rules apply when parameters are changed: Changing of the Radius causes Bottom Diameter change Changing of the Top Diameter causes Bottom Diameter change Changing of the Bottom Diameter causes Top Diameter change Changing of the Start Angle causes Bottom Diameter change Changing of the Sweep Angle causes Top Diameter change
181
In the Show area, SolidCAM displays the 3D model of the selected tool. In the graphic area of this page you can rotate, zoom and pan the 3D model of the tool. Use the following combinations: Middle mouse button - Rotation of tool Shift + Middle mouse button - Zoom of tool Ctrl + Middle mouse button - Pan of tool Shape edit The Edit page of the Shaped tools dialog box enables you to edit the dimensions of the selected tool. This dialog box contains two pages: Show This page displays a 3D model of the selected tool.
182
In the graphic area of this page you can rotate, zoom and pan the 3D model of the tool. Use the following combinations: Middle mouse button Rotation of tool Shift + Middle mouse button Zoom of tool Ctrl + Middle mouse button Pan of tool Edit The interactive picture of the selected shaped tool will be displayed. The tool is divided into segments like cylinders, cones and toruses. With the Parameters table below the picture, you can edit the actual dimensions of the shaped tool. 1. Select the tools element on the picture or through the parameter pages. 2. Type the new value of the parameter in the value field.
183
Work Material
Speed/Feed Defaults
This dialog box enables you to define the Work Material and the Tool Material and to define the different values of the Speed and Feed for each combination set. The dialog box shows the treecontrol list of the existing Tool and Work Materials. The root items of the tree are the Tool Materials; for each tool material you can see the list of the Work Materials for which Speed/Feed default is defined. The right area of the dialog box shows the Speed/Feed parameters for each selected pair of Tool material and Work material.
184
Add/Delete page This page enables you to operate the Tool and Work materials and define the Speed and feed values for the combination of the tool and work materials.
Right-click in the tool/work material list and choose the specific item from the menu.
Add Tool Material
This option enables you to add the new Tool Material. The combination pairs of the new Tool material with the existing Work materials are automatically added. Type the name for the new Tool Material.
Add Work Material
This option adds a new Work material. The Work material is added to all existing Tool material combinations.
Delete
This option removes the selected Tool/Work material from the list.
Rename
This option enables you to assign a new name to the selected Tool/Work material.
185
Work material parameters In this area, you have to assign the Speed and Feed values for the selected Tool/Work material combination. SolidCAM enables you to define the following values:
V V fin FZ XY FZ Z FZ fin
Signifies the Rough Material cutting speed in Meters/Minute in the Metric system or in Feet/Minute in the Inch system. Signifies the Finish Material cutting speed in Meters/Minute in the Metric system or in Feet/Minute in the Inch system. Feed rate in the XY plane, in Units per tooth. Feed rate in the Z direction, in Units per tooth. Feed rate used for finish milling, in Units per tooth.
Edit page This page enables you to edit the values of the Speed and Feed for each combination of the Tool/ Work material.
Click on the parameter you have to change and enter the new value.
186
Geometry
Whenever you work in CAD, you use 2D wireframe curves and 3D models to describe real life parts. With SolidCAM, you can turn these models into GCode for any CNC-machine. A major step in the process from modeling to manufacturing is to tell SolidCAM what and where you want to machine. In SolidCAM, existing models are used to pass this information to the CAM module.
Defining a new Geometry Drilling Geometry 3D Model Geometry Wireframe Geometries Managing Geometries Geometry synchronization
4.1 Introduction
SolidCAM enables you to turn 3D models, 2D and 3D sketches built with SolidWorks into GCode for any CNC-machine. In this process of modelling to manufacturing, geometries have to be defined to determine where the model will be machined.
Geometry
3D
Wireframe
Drill
3D Model Faces
In SolidCAM, you can define geometries in the operation dialog box; this enables SolidCAM to check if the geometry follows the necessary rules needed in this type of operation. The geometries defined in SolidCAM are associative to the SolidWorks model. Any change made to the model or sketch will propagate to referenced SolidCAM geometry.
188
4. Geometry
This method enables you to select only the holes whose axis intersects with the revolution axis of the CAM-Part. This method can be chosen when the appropriate CoordSys that enables the use of the 4th axis is selected.
189
190
4. Geometry
All the selected points are shown in the list at the bottom of the dialog box. To remove a point from the list, right-click on the point name in the list and choose the Delete option from the menu or choose the Delete All option to remove all of the points. Sequence of drill positions You can change the sequence of drill positions in the list by dragging and dropping. You can also define and edit the sequence of drill positions in the Drilling Operation dialog box (see topic 6.6.3). Selecting modes (Select centers by) You can add drilling positions to the current geometry using the following options: Pick position. You can define drilling positions one by one using the CAD point selection options. You can also type the coordinates into the X,Y,Z dialog box and confirm each drilling point by clicking on the Enter button. 1. Pick drilling center position select the drilling point. 2. Confirm the selection by clicking on the Enter button. 3 Points on circumference. Usually, all curves and arcs of imported models are converted into splines by the exporting CAD system. Due to the nature of spline curves or surface boundaries, you cannot pick a center position like you could on a circle or arc. SolidCAM calculates the center position of an arc defined by three points positioned on the spline edges. This facilitates the selection of drilling centers on spline surfaces. 1. Pick the first point pick a point on the circumference of the circle or arc using the CAD point selection options or type the coordinates into the X,Y,Z dialog box and confirm. 2. Pick the second point.
191
3. Pick the third point. 4. SolidCAM calculates the center of the three points and displays the drilling position. Multi-positions. With this option, you can select model faces. SolidCAM automatically determines all arcs/circles located on the selected face and defines the center points as drilling positions. You can also use the mouse to drag a box over the area of the model. SolidCAM automatically recognizes all arcs inside this area and defines the center points as drilling positions.
The options you have selected in Filter affect the search when you apply the Multi-positions command. 1. Check whether the Filter options you have selected are correct. 2. Click on the solid model face. 3. SolidCAM starts searching the selected face for drilling positions and displays the search result. All circle/arc centers. SolidCAM is searching the solid model for arcs and circles and adds all center points as drilling positions to the geometry. The options you have selected in Filter affect the search result when using the All command. 1. Check whether the Filter options you have selected are correct. 2. Click on the All circle/arc centers button to start the search. 3. SolidCAM starts searching the solid model for drilling positions and display the search result.
192
4. Geometry
CAD selection. SolidCAM enables you to select the drilling geometry with the SolidWorks selection tools. 1. Check whether the Filter options you have selected are correct. 2. Click on the CAD selection button. The CAD selection button changes to Resume. 3. Select the geometry with SolidWorks tools. 4. Click on the Resume button. Selection filter (Filter for circle/arc selection) You can use various filters to search circles/arcs on the model for drilling positions. SolidCAM selects only the drilling positions with the attributes set in the Filter options. You can select the following attributes: Include arcs. If this check box is selected, SolidCAM also includes arc centers in the search for drilling positions. This option can solve the occasional problem caused by imported 2D sketches that have circle entities cut to halves. It also enables you to place drills in filleted corners. All circles. SolidCAM is searching the model for circles. Arcs or broken circles are not included in the search result. By Radius. You can limit the search by defining a radius value. Only arcs and circles with the given radius are selected and their center position is added to the drilling geometry. You can define the radius value on the model. Click on the By Radius button. In the Select radius by dialog box, you can choose how you want to pick the radius from your model. Select the corresponding option and pick the radius from an existing circle/ arc or use the 3 Points on circumference definition. Z-Level. You can also limit the search to the Z-level. Only arcs and circles on the given XY-plane are selected and their center position is added to the drilling geometry. You can select the Z-level on your model. Click on the On Z-level button and select a point on your model using the point selection options. The Z-coordinate of the selected point is passed to the corresponding field.
193
Selected circles/arcs The No longer can be selected option enables you to select drills that were not selected previously. The Show the center points option enables you to see the drills picked in the previous drilling geometry.
Configurations This field enables you to switch between SolidWorks configurations. Choose the necessary configuration for the geometry definition. Mode You can switch between the Select/Unselect mode to define or remove drilling positions from the geometry. All the selected drilling positions are shown in the list at the bottom of the dialog box.
194
4. Geometry
Type
Pick face
SolidCAM automatically selects all the holes starting from the selected face. The Full holes only option enables you to select only full diameter holes.
Pick hole
This mode enables you to select the holes around the 4th axis one by one.
195
Pick 3 points
This mode enables you to define the drilling geometry by selection of three points on the holes edge.
CAD selection
SolidCAM enables you select the drilling geometry with the SolidWorks selection tools. Drilling positions list
This list displays all the selected drilling positions, their angle around the 4th axis and location along the revolution axis. The right-click menu is available. The Unselect/Unselect All options enable you to unselect the drilling positions chosen for the operation. The Reverse option enables you to reverse the angle value 180 around the 4th axis. The Sort by Angle/Coordinate options enable you to sort the drilling positions in the list.
196
4. Geometry
197
List of selected objects You can select an object by clicking on it. When an object is selected, its icon is displayed in the list in the bottom of the dialog box. To unselect the object, click on it again or right-click on its icon in the list and choose Unselect from the menu. To remove selection from all objects in the list, click Unselect all.
button.
Use the CAD selection mode to select the geometry with Host CAD tools.
198
4. Geometry
Prole
Working Area
Limit
Slot
Section
Closed chain
Open chain
Chains for Pocket Milling (see topic 6.4) must be closed. The first chain defines the contour of the pocket. All closed chains inside the first chain of each pocket are automatically treated as pocket islands. Overlapping chains are milled as separate pockets, not as islands. To select multiple pockets with islands, continue adding chains to the geometry.
Closed chain
199
1. Select a chain to define the geometry. 2. Confirm the chain definition with the Apply button. 3. When you have completed the geometry definition, confirm the Geometry Edit dialog box (see topic 4.5) with the button.
3. When you have completed the geometry definition, confirm the Geometry Edit dialog box (see topic 4.5) with the button.
3. When you have completed the geometry definition, confirm the Geometry Edit (see topic 4.5) dialog box with the button.
200
4. Geometry
2. Select the edges or lines that make up your section and confirm by clicking on the button. 3. Click on the Pick Point button to pick the reference point. This point defines the level of the section relative to the upper level of the operation. 4. The Pick Z-Reference Point dialog box is displayed. Pick the point on the model and confirm with the button. 5. Confirm the Section Geometry dialog box with the button.
201
Editing a Section geometry You can edit the section or redefine the reference point of the section. 1. In SolidCAM Manager, right-click on the Section geometry and choose Edit from the menu. 2. In the Section Geometry dialog box, click on the Pick Point button to pick the reference point again or on the Edit/Replace buttons to edit or replace the section chain using the Chain Selection dialog box. 3. Click on the button to confirm your changes and close the dialog box. Spline Approximation This field enables you to define the Spline approximation tolerance for the chain selection.
button.
202
4. Geometry
4.5.2 Configurations
This option enables you to switch between SolidWorks configurations. Choose the relevant configuration for the geometry definition.
203
4. Geometry
This option enables you to create a continuous geometry chain by picking its successive entities. During the geometry definition, the gaps between selected entities are detected. They can be closed taking into account the Gap Minimum and Gap Maximum tolerances (see topic 4.5.10).
1. Pick start curve select the first entity (a wireframe element or the solid model edge).
205
2. Pick next curve select the next curve that belongs to the chain. If the detected gap is smaller than the Gap Minimum tolerance, it is being closed automatically by extending/shortening chosen entities up to their virtual intersection point. If the gap is greater than the Gap Minimum tolerance but smaller than the Gap Maximum tolerance, a message is displayed asking you if you want to close the gap. If you confirm the message, the gap is being closed automatically by extending/shortening chosen entities up to their virtual intersection point. If you cancel, the gap is not being closed, and the last entity is being unselected. In case the gap is larger than the Gap Maximum tolerance, the selected entity is not accepted, and the following message is displayed:
button.
SolidCAM keeps the associativity to any edge or sketch entity. Any change made to the model or sketch automatically updates the selected geometry.
Curve + Close corners
This option enables you to close the gaps between successive chain entities irrespective of the Gap Minimum and Gap Maximum values by virtually extending the entities up to their intersection.
First selected entity
Splines and arcs are extended by lines tangential to the arc/spline at its end point. 1. Pick start curve select the first entity (a wireframe element or the solid model edge).
206
4. Geometry
2. Pick next curve select the next curve that belongs to the chain. When a gap is detected between these entities, the chain is continued by virtually extending the selected entities, according to the direction of the first entity, up to the virtual intersection point. If an intersection point cannot be found by extending either one or both selected entities, the following message is displayed:
In case several possible intersection points exist, the point closest to the last vertex of the first selected entity is chosen. 3. To complete the selection, click on the
Associativity
button.
When the model used for the geometry definition is modified, SolidCAM enables you to synchronize the geometry with the updated model. During the synchronization SolidCAM determines gaps areas created using the Curve + Close Corners option and regenerates the extension of the chain elements so as to close the gaps.
Point to point
This option enables you to connect the specified points with a straight line.
1. Pick start point pick a point on the model or enter the coordinates into the command line.
207
2. Pick next point pick the following point (enter the coordinates into the command line), and the chain element will be created from the previous point up to this point. 3. To complete the selection, click on the
Associativity
button.
SolidCAM does not keep the associativity to any selected point. SolidCAM saves the X-, Y- and Z-coordinates of the selected points. Any change made to the model or sketch does not update the selected geometry. You cannot select a point that is not located on a SolidWorks entity (if you need to select such a point, add a planer surface under the model and select the points on that surface). The following rules are applicable to virtual line selection with the Point to Point option: 1. When you select a virtual line between two edges, the line behaves as a spring. Whenever the model is changed and synchronized, the geometry is updated with the model. 2. When you select a sequence of several virtual lines, only the points connected to model edges or sketch elements are updated, but all the other points stay fixed at the defined X-, Y- and Z-positions.
Arc by points
This option enables you to create a chain segment on an arc up to a specific point on the arc. 1. Pick start point choose a point on the arc where you want the chain to start. If this is not the first point on the chain, go to step 2. 2. Pick next point choose a point on the arc between the first point on the arc and the third point on the arc.
First Point Second Point Third Point
3. Pick end point choose a third point on the arc where you want the chain to end.
208
4. Geometry
Associativity
SolidCAM does not keep the associativity to any selected arcs by points. SolidCAM saves the X,- Y- and Z-coordinates of the selected points. Any change made to the model or sketch does not update the selected geometry.
Start entity
Selected chain
If the chosen end item cannot be reached by the chain flow, the chain definition is terminated when the start chain segment is reached. The chain is automatically closed.
End entity
Start entity
Selected chain
209
The confirmation message is displayed. The Auto-to option is useful if you do not want to define a closed chain, but an open chain up to a certain element.
Auto-general
SolidCAM highlights all entities connected to the last chain entity. You have to select the entity along which you want the chain to continue.
Auto-constant Z
This option identifies only entities on the same XY-plane with the previously selected chain entity. You are only prompted to identify the next chain element when two entities on the same Z-level are connected to the chain. The system tolerance for this option can be set in the SolidCAM Settings.
210
4. Geometry
Auto-Delta Z
You are required to enter a positive and negative Z-deviation into the Delta Z dialog box. Only entities within this range are identified as the next possible entity of the chain. 1. Pick start curve select the start entity of the chain. 2. Pick point in chain direction indicate the chain direction by choosing a point on the selected start entity of the chain. 3. You are prompted to select one of the possible curves if the system detects that more than one entity can be the next element of the chain. Indicate your choice. 4. When the system can close the chain, the confirmation message is displayed. Choose Yes to accept. If you answer No, you can continue the chain selection: for example, undo the last step or cancel the chain selection.
Undo step
This button enables you to undo the last selection of a chain element.
Reverse
This button enables you to reverse the direction of the chain you are currently working with. The direction is indicated by an arrow at the chain start point.
Accept Chain
211
4.5.9 Options
Spline approximation This field enables you to define the Spline approximation tolerance for the chain selection. Arcs on the XY-plane are saved as arcs in the SolidCAM database; if you select an arc or spline that is not on the XY-plane of the actual part Coordinate System, SolidCAM will do the following: 1. Project the arc or spline on the XY-plane of the active CoordSys and divide it into segments according to the specified tolerance.
Tolerance
2. In order to reduce the number of segments, SolidCAM tries to fit arcs on the segments generated in step 1 according to the specified tolerance multiplied by 3.
Arc
Tolerance
Spline
4. Geometry
If the gap between the edges is smaller than the specified Gap minimum value, the system automatically continues the chain and closes the gap with a line. If the gap is in the range between the Gap minimum and Gap maximum values, you are asked whether the gap should be closed. If you answer Yes, the gap is automatically closed with a line. If the gap is larger than the Gap maximum value, the following message is displayed: When the message is confirmed, the last selected chain entity is rejected.
Open edge
Open pocket
213
When this option is chosen, picking a pocket geometry edge marks it as open.
Wall
When this option is chosen, picking a pocket geometry edge marks it as closed (wall).
Toggle
When this option is chosen, picking a closed edge marks it as open and the next picking marks it as closed, and so on. Select This section offers you the following selection methods:
Single entity
When this method is chosen, you can pick single entities in order to mark them as open/closed.
From/To entities
When this method is chosen, you can mark a segment of the pocket geometry by picking the start and the end entities. CAD Selection This button enables you to perform the selection using the CAD tools. The marking of open edges is available only for Pocket operations (see topic 6.4).
214
4. Geometry
When this mode is chosen, SolidCAM enables you to pick a model face. All the loops of this face are collected and closed geometry chains are created. The Loops filter is applied to the collected loops to exclude all those that do not match the specified criteria. Selection Filter When this check box is selected, you can select only elements located on a specific Z-level. To define the Z-level, either enter the value in the dialog box or click on the On Z-Level button and pick the level on the model.
215
Loops filter When this check box is selected, the External loop and Internal loops check boxes are available. When the External loop check box is selected, all the internal loops are excluded from the picked face and only the external loops are collected.
External loop
When the Internal loops check box is selected, all the external loops are excluded from the picked face and only the internal loops are collected.
Internal loops
When both these check boxes are selected, the system collects both internal and external loops from the picked face. This section is enabled only when the Faces mode is chosen.
216
4. Geometry
CAD selection Click on this button to select the chains with the Host CAD tools. Get All This button enables you to select all of the model elements. Sort Type When there is more than one chain, this option enables you to determine the chain you would like to start from. The Sort chains dialog box is displayed (see topic 4.6.2). Chains direction This option enables you to determine the cutting direction of each chain. The Chains Direction dialog box is displayed (see topic 4.6.1). View Chains This option enables you to see the chains before they are created.
External chains are the outer borders of a pocket. You can determine if you want the chain to go clockwise or counterclockwise by choosing CCW or CW.
Internal chains opposite
Internal chains are located within the boundaries of external chains. Selecting this check box, you can have the internal chains go in the direction opposite to that of the external chains.
217
Open chains direction This option enables you to determine the direction of open chains. To center: the chain start point is the end of the chain furthest from the given center point. From center: the chain start point is the end of the chain closest to the given center point. Selecting the Change center position check box enables you to choose the center position by entering the X- and Y-values or by picking a point on the model. If you do not change the center position, the CoordSys origin is used as center point.
The next chain is the chain with the start point closest to the end point of the last chain.
Start to Start
The next chain is the chain with the start point closest to the start point of the last chain. Sort by Value The next chain that is closest to the last chain in a given direction is chosen.
X start
4. Geometry
Reverse
The direction of the chains changes (X-start: Left to Right; Y-start: Upward or Downward). Polar Sort Chains are selected around a specific point. If no point is chosen, the default point is the CoordSys origin of the CAM-Part.
CW Direction
The center position is chosen either by entering X-/Y-values or by picking a point on the model.
Start angle
This field controls the angle between the start point of the chain and the point of rotation.
219
You can change or update the selected geometry. If the tool path of an operation was calculated before, it is deleted. You have to recalculate the operation after making changes to the geometry. Generate Sketch This command enables you to generate a SolidWorks sketch containing chains of the current wireframe geometry. The sketch is generated in the CAM component of the SolidCAM Part assembly. This command is available only for wireframe geometries. Copy This command enables you to duplicate the selected geometry. The dialog box is displayed to define the name of the geometry.
Geometry Name
220
4. Geometry
Copy as Working area This command copies the selected geometry as a working area. SolidCAM generates a SolidWorks sketch containing chains of the selected geometry. The sketch will be generated in the CAM component of the SolidCAM Part assembly. A new Working area geometry is defined using this sketch. The Geometry Name dialog box enables you to define the name of the geometry. Delete/Delete All You can delete geometries not used in any machining operation. These geometries are displayed under the Geometries header. Any geometry used in operations appears under the respective operations only and cannot be deleted unless the operation is deleted as well. The Delete all command is only available when you right-click on the Geometries header. It deletes all geometries not currently used in any machining operation. Whenever you click on a single geometry, the Delete command is available for the selected geometry only. Synchronize/Check synchronization When the SolidWorks model is updated, you can check the compliance of the SolidCAM geometry to the updated SolidWorks model. If the SolidCAM geometry is not synchronized with the SolidWorks model, you can synchronize it.
SolidWorks Model
When the SolidWorks model is changed, SolidCAM uses the synchronization algorithm to synchronize the geometry with the updated SolidWorks model.
SolidWorks Model has changed, SolidCAM Geometry has to be updated SolidCAM Geometry is updated
221
Synchronization check SolidCAM marks all SolidWorks entities used for the geometry definition with tags. The list of these tags is saved. The tags enable you to establish a connection between the SolidCAM geometry and the SolidWorks model entities. The relations between the tagged SolidWorks geometry and SolidCAM geometry is saved in the geometry file (*.gem). SolidCAM enables you to check the synchronization status automatically or manually depending on the Synchronization settings (see topic 12.5).
Tag Tag
SolidCAM Geometry
Tag
Tag
SolidWorks Model
When you need to check the synchronization status of the geometry manually, do the following: 1. Right-click on an operation or geometry entry in SolidCAM Manager. 2. Choose the Check Synchronization item from the menu. SolidCAM checks all the geometry entities in the following method: The SolidWorks model elements are compared geometrically to the relevant entities in the SolidCAM geometry file. If a misfit is determined between the SolidWorks model and the SolidCAM geometry, this geometry is marked with the synchronization mark .
If there is a gap or overlapping entities, the geometry is also marked with the synchronization mark . The synchronization mark points to the problematic geometries and enables you to solve the problems with the geometries that were not synchronized.
222
4. Geometry
Geometry synchronization When the geometry has to be synchronized (this geometry is marked with the synchronization mark), do the following to synchronize it: 1. Right-click on a geometry entry in SolidCAM Manager. 2. Choose Synchronize from the menu.
or 1. Right-click on an operation entry in SolidCAM Manager. 2. Choose Synchronize from the menu. The Synchronize & Calculate command enables you to synchronize the operation geometries and calculate the tool path. All of the geometries used in the operation are synchronized. During the synchronization, SolidCAM tries to update the SolidCAM geometry according to the updated SolidWorks model. SolidCAM finds the updated edges according to the saved tags data and tries to re-create the geometry chain. SolidCAM recognizes gaps between geometry entities and closes them.
223
SolidCAM closes the gaps by using the smallest number of entities. There are two methods of closing gaps: If the original geometry entities are in the same plane with the Coordinate System, SolidCAM tries to close the gap with entities in the same plane only. If the original geometry entities are not on a plane, SolidCAM is using a random search algorithm that closes the gap in the geometry. This search algorithm can find different solutions to close the same gap; this depends on the sequence of the entities involved in the loops that connect to the geometry entity. The geometry that cannot be updated is marked with an exclamation mark . You have to edit such geometries and manually update the problematic chains. SolidCAM does not find new chains that are not directly connected to old chains. The number of chains in the geometry remains the same. For example, SolidCAM does not find a new island in a pocket geometry.
SolidCAM Geometry
When SolidCAM determines that the solid has changed, it does not need to detect what has changed; it simply recalculates the facet model.
Updated SolidWorks Model Updated SolidCAM Geometry
224
4. Geometry
Synchronization check SolidCAM enables you to check the synchronization status by comparing the SolidWorks model and the SolidCAM 3D Model geometry. You can check the synchronization status automatically or manually, which depends on the Synchronization settings. When you need to check the synchronization status of the geometry manually, do the following: 1. Right-click on an operation or geometry entry in SolidCAM Manager. 2. Choose the Check Synchronization item from the menu. If a difference is found, SolidCAM marks the geometry and related operations with the synchronization mark . Geometry synchronization When the geometry has to be synchronized (the one marked with the synchronization mark), do the following to synchronize it: 1. Right-click on a geometry entry in SolidCAM Manager. 2. Choose Synchronize from the menu.
or
225
1. Right-click on an operation entry in SolidCAM Manager. 2. Choose Synchronize from the menu. The Synchronize & Calculate command enables you to synchronize the operation geometries and calculate the tool path. All the SolidCAM geometries used in the operation are synchronized. During the synchronization, SolidCAM recalculates the facet model.
The Boolean Operations dialog box is displayed. Coordinate System This field enables you to choose the Coordinate System where the source geometries for the boolean operation are located. The resulting combined geometry is created in the chosen coordinate system. Configurations This field enables you to choose the SolidWorks configuration where the source user-defined geometries for the boolean operation are located.
226
4. Geometry
Operation type This field enables you to define the type of the boolean operation. The following boolean operations are available:
Unite
Source geometries
This option enables you to unite selected geometries into a single one. All internal segments are removed; the resulting geometry is outer profile.
Geometry 1 Resulting geometry Geometry 2
Merge
This option enables you to merge a number of geometries, created by different methods, into a single one.
Source geometries
Geometry 3
Subtract
This option enables you to perform subtraction of two geometries. The order of the geometry selection is important; the second selected geometry is subtracted from the first selected one.
Source geometries
227
Intersect
Source geometries
The Accept button performs the command chosen in the Geometries section. Geometries The Geometries section displays all the available working area geometries classified by the definition method. This section enables you to choose the appropriate geometries for the boolean operation. Select the check box near the geometry name in order to choose it for the boolean operation.
When you click on the Accept button, the resulting geometry is displayed in the list under the Combined 2D header. SolidCAM enables you to edit the name of the created geometry. The newly created geometry is automatically chosen for the further boolean operation. The resulting combined geometry is always a 2D geometry even if one or more of the input geometries is a 3D boundary. The right-click menu available on the list items enables you to perform the following operations: The Accept button enables you to perform the chosen boolean operation with the selected geometries. The Unselect all option unselects all the chosen geometries. The Delete option enables you to delete combined geometries generated in the current session of the Boolean Geometries dialog box.
228
Operations
In SolidCAM, an operation is a single machining step. A workpiece is usually manufactured using several machining steps and technologies. For each of these steps you can define a separate operation. An operation can be very complex, but always uses one tool, one major geometry and executes one machining type, e.g. 3D Milling, Profile Milling or Drilling. You can edit any single machining operation, change the operation sequence and generate the GCode, combine and split the operation list of your CAM-Part.
Adding an operation Operation dialog box interface Working with operations Operation Transformations Fixture
When you add an operation by right-clicking on the Operations header, the new operation is added at the end of the operation list. When you add an operation by right-clicking on an existing operation, the new operation is inserted after the selected operation.
230
5. Operations
Parameter illustration
Operation buttons
Technology The Technology box displays the chosen technology according to the operation type. Operation name The Operation name box displays the operation name and enables you to choose another already existing operation as a template. Template The Template box enables you to save the current operation as a template and to load another already existing template. Info By clicking on this icon, you can display a window that contains the information summary of the operation. In this window, the name of the operation, the Tool data and the Milling levels data are listed.
231
Parameters pages and illustration The list on the left side of the dialog box enables you to switch between the following parameters pages:
Geometry
This page enables you to define the geometry for the operation.
Tool
This page enables you to define the tool for the operation.
Levels
This page enables you to define the machining levels for the operation.
Technology
This page enables you to define the technological parameters such as offsets, roughing and finishing data, depth type, etc. The Advanced Technology page contains the infrequently used parameters and options whose definition is required only in particular machining cases.
Link
This page enables you to define the way how the tool approaches the material and retreats away.
Misc. parameters
This page contains the miscellaneous parameters such as Message, Extra parameters, and so forth. In the bottom left corner of the dialog box, the illustration of a currently selected interface element is displayed to facilitate the definition of the corresponding parameter. Operation buttons At the bottom, the operation buttons are located. These buttons enable you to save and calculate the operation, start its simulation, etc.
232
5. Operations
When you define a geometry and a tool, SolidCAM automatically enters the default name (e.g. 3DR_Profile_T1) based on the operation type, geometry name and tool number.
3DR_Prole_T1
Operation type abbreviation Geometry name Tool
You can edit the operation name, if necessary. SolidCAM uses the following operation type abbreviations for Milling operations: 2.5D Milling FM_ F_ P_ D_ S_ F3D_ Face Milling Profile Contour 3D Pocket Drilling Thread Milling Slot T-Slot Translated Surface Pocket Recognition Drill Recognition
3D Milling 3DR_ 3DS_Lin 3DS_Offs 3DS_Sp 3DS_Cir 3DS_CZ 3DS_Pen 3DS_CS 3DF_Lin 3DF_Offs 3DF_Sp 3DF_Cir 3DF_CZ 3DF_Pen 3DF_CS 3DD 3DE 3D Roughing Linear 3D Semi-Finishing strategy Offset cutting 3D Semi-Finishing strategy Spiral 3D Semi-Finishing strategy Circular Pocket 3D Semi-Finishing strategy Constant Z 3D Semi-Finishing strategy Pencil Milling 3D Semi-Finishing strategy Constant Step Over 3D Semi-Finishing strategy Linear 3D Finishing strategy Offset cutting 3D Finishing strategy Spiral 3D Finishing strategy Circular Pocket 3D Finishing strategy Constant Z 3D Finishing strategy Pencil Milling 3D Finishing strategy Constant Step Over 3D Finishing strategy 3D Drilling operation 3D Engraving operation
When you add a new operation, you can use an existing operation as a template for the new operation. All values of the template operation are copied and you only need to edit some varying parameters, e.g. select another geometry or redefine the surface offset value. Use the Operation name list to select the template operation.
234
5. Operations
5.2.2 Template
SolidCAM enables you to create operation templates: once defined, an operation can be saved as a template and its data can be loaded into a new operation of the same type. The saved template data does not include the geometry which must be defined for each operation separately after loading the template. The saved template can optionally include the tool data. This section provides you with the following functionality: Saving Templates button enables you to save all of the current operation data (except for the The Save Template geometry) as a template. The Template Manager dialog box is displayed. This dialog box enables you to define a name for the template. The default location offered by SolidCAM is defined in the SolidCAM Templates Directory section of the Part Settings dialog box (see topic 2.10.9). The Operation Templates table displays all operation templates located in the SolidCAM Templates Directory, their types and the technology. The Include tool data check box enables you to include the tool data in the saved template. The saved tool data is used during the further template loading.
235
Enter the name in the Template edit box to save a new template or choose an existing template from the table to overwrite it and click on the OK button. If a template with the defined name already exists in the current location, SolidCAM displays the following warning message:
When you confirm this warning by clicking on the Yes button, the existing template is being overwritten with the new one. When you click on the No button, the Save template dialog box is displayed again so that you can choose a different name for the template.
Saving an operation as a template using SolidCAM Manager
You can also save an existing operation as operation template by right-clicking on the operation name in SolidCAM Manager and choosing Create Template from the menu. This command displays the Template Manager dialog box that enables you to save the template data as described above.
236
5. Operations
Loading Templates button enables you to load an already existing template into the current The Load Template operation. The Template Manager dialog box is displayed.
This dialog box displays only the templates of type/technology suitable for the current operation. Choose the required template and click on the OK button. When the template is loaded, all the current operation data is substituted with the data from the template. When a template is loaded into the operation, its name is displayed in the edit box in the Templates section.
When you place the mouse cursor over the edit box, the full path to the loaded template is displayed in a pop-up message.
When any of the operation data is modified after loading the template, the template name in the edit box is marked with asterisk (*).
237
Tool search
When an operation template is loaded, SolidCAM checks for tool data in the template. If the tool data was saved in the operation template, the tool search is performed as follows: When a tool used in the operation template is defined as Permanent, the tool search is performed according to the tool number only. First, the tool search is performed in the Part Tool Table. If the tool with the defined number is not found in the Part Tool Table, additional search is performed in the Current Tool Table. If a tool with the defined number is found in the Current Tool Table, it is being copied into the Part Tool Table and chosen for the operation. If it is not found in the Current Tool Table, the following error message is displayed:
When you confirm this message, the operation dialog box is displayed again so that you can define a tool. When the tool in the operation template is not defined as Permanent, the tool search is performed according to the tool parameters defined on the Tool search page of the SolidCAM Settings dialog box. The tool search is performed in the Part Tool Table. If a tool with the same definition as that used in the template is not found in the Part Tool Table, additional search is performed in the Current Tool Table. If a suitable tool is found in the Current Tool Table, it is being copied into the Part Tool Table and chosen for the operation. If it is not found in the Current Tool Table, a new tool with the parameters defined in the template is being added to the Part Tool Table and automatically assigned the first not used tool number. When you load a template with tool data into an operation in which the tool is already defined, the following message is displayed:
When you confirm this message, SolidCAM replaces the tool defined in the operation with the tool defined in the template.
238
5. Operations
Creating a new operation from an existing template
SolidCAM enables you create a new operation from an existing template. Right-click on an operation entry in SolidCAM Manager and choose Add Operation from Template from the menu. The Template Manager dialog box is displayed. This dialog box enables you to choose an existing template. In this case, the Template Manager dialog box displays all the templates existing in the SolidCAM Templates Directory regardless of their type/technology.
When you confirm the dialog box by clicking on the OK button, SolidCAM inserts the chosen operation template into the SolidCAM Manager tree. The inserted operation is incomplete; it means that the operation has no defined geometry and tool (if the initial operation template used for the operation definition had no tool). The incomplete operations are marked with red color in SolidCAM Manager. Since the incomplete operations have no geometry, their tool path cannot be generated. In order to completely define the operation, you have to edit it by defining the machining geometry and tool (if necessary). During creation of a new operation from an operation template, SolidCAM assigns the Machine Coordinate System #1 (Position #1) for the newly created operation. During the operation editing, this Coordinate System can be changed.
239
Process Template A Process Template is a template of a series of operations that execute a specific machining task. This functionality enables you to store a complete chain of technological operations as a template and apply it for the machining of similar cases.
Defining Process Templates
Manager
To create a process template, select in SolidCAM all the names of operations intended to be included in the Template, right-click and choose Create Template. The Template Manager dialog box is displayed.
This dialog box enables you to save the chosen operations as a process template. All the process templates existing in the SolidCAM are displayed. The process templates names are listed in the Template Folders section under the Process Templates header. The content of the templates is displayed in the Operation Templates table.
Templates Directory
The Include tool data check box enables you to include the tool data into the saved process template.
240
5. Operations
To save the selected operations as a new process template, enter a name in the Process name edit box or choose an existing process template from the Process Templates list and confirm by clicking on the OK button. If a process template with the defined name already exists in the current location, the following warning message is displayed:
When you confirm this warning by clicking on the Yes button, the existing process template is being overwritten with the new one. When you click on the No button, the Template Manager dialog box is displayed again so that you can choose a different name for the process template. The Template Manager dialog box provides you with the capability to create an empty process template and copy a number of operation templates from different process templates into this empty one.
Using Process Templates
SolidCAM enables you to insert operation templates contained in a process template into a CAM-Part and convert them into regular SolidCAM operations. To insert a process template into the CAM-Part, right-click on the Operations header or on several selected operations in SolidCAM Manager and choose Add Operation from Process Template. This command displays the Template Manager dialog box that enables you to choose an existing process template to be inserted.
241
During creation of a new operation from the process template, SolidCAM displays the CoordSys selection dialog box that enables you to choose the Coordinate System to be used in the created operations. The inserted operations are incomplete; it means that the operations have no defined geometry and tool (if the initial operation template used for the operation creation had no tool). The incomplete operations are marked with red color. Since the incomplete operations have no geometry, their tool path cannot be generated. In order to completely define the operation, you have to edit it by defining the machining geometry and tool (if necessary). Managing operation/process templates To manage your operation and process templates, click Manage in the SolidCAM menu. The Template Manager dialog box is displayed.
Templates
When the Templates header is selected, all the operation templates located in the SolidCAM Template Directory are displayed in the Operation Templates table. All the process templates located in the SolidCAM Template Directory are listed under the Process Templates header. When a process template is selected, all the operation templates included in it are displayed in the Operation Templates table.
242
5. Operations
Managing process templates
SolidCAM enables you to manage the process Templates with the right-click menu available on the Process Templates header or on each process template. This menu provides you with the following commands:
New Process Template
SolidCAM enables you to manage operation Templates with the right-click menu available on the Operation Templates table entries. This menu is available for the standalone operation templates located in the SolidCAM Template Directory and for operation templates included into process templates.
Create Process Template
This command enables you to create a new process template; the current operation template is added to this process.
243
Copy
This command enables you to copy the current operation template into the clipboard.
Paste
This command enables you to paste the operation template from the clipboard. The operation template is inserted into the chosen location (either into the active process template or as a standalone operation template into the into the SolidCAM Template Directory).
Edit
This command enables you to load the chosen operation template for editing. When a template is loaded, SolidCAM displays the appropriate operation dialog box with the template data.
SolidCAM enables you to edit all the parameters and options of the template, except for the geometry and coordinate system. The Save Template template dialog box.
Delete
button enables you to save the template data using the Save
244
5. Operations
5.2.3 Info
The button at the right side of the operation dialog box displays a window that contains the information summary of the operation. In this window, the name of the operation, the Tool data and the Milling levels data are listed.
Save All settings and parameters of the operation are saved on your disk. The tool path, however, is not calculated. This button enables you to postpone the calculation or to calculate operations in batches. Use the corresponding commands of SolidCAM Manager to calculate the operation later on. In the operation list, all operations that have not been calculated are marked with asterisk (*). Save & Calculate All settings and parameters of the operation are saved on your disk and the tool path is calculated. After the calculation has been performed, you can exit from the operation dialog box and return to SolidCAM Manager.
245
There is no need to recalculate an operation if its changed parameters do not affect the tool path. These operation parameters include: Tool Outside Holder Length Tool Cutting Length Holder Operation name Message Extra parameters Feed There is no need to recalculate all the operations if the CNC-machine is changed, as long as the following MAC parameters are not changed: compensation
comp_by_zero_tool comp_arc_arc comp_arc_line comp_line_line comp_x_start min_delt_arc_rad zero_value gen_procs abs_zero_chng full_gcode init_cpos set_dir loops eps_line next_angle
For more information on these parameters, refer to SolidCAM GPPTool User Guide. Simulate This button performs simulation of the cutting process. The operation must be calculated before this option can be used.
246
5. Operations
GCode This button generates the temporary GCode file for the operation. The GCode file is generated into the CAM-Part folder regardless of the defined settings. The generated GCode file is opened in the text editor determined by SolidCAM Settings. When you close the operation dialog box, the file is removed. Note that the operation must be calculated before this option can be used. To save the temporary GCode file, use the text editor functionality. Save & Copy This button saves the current operation data and automatically creates a new operation with the same parameters. The new operation is automatically opened for editing. Using the Save & Copy functionality, you can quickly create a new similar operation where most parameters are identical. Exit This button enables you to close the operation dialog box and return to SolidCAM Manager. Any changes you made in the operation dialog box are lost if you exit the operation without prior saving.
5.2.5 Calculator
SolidCAM enables you to use a built-in calculator to calculate parameter values. The Calculator is available for each numeric parameter either by choosing the appropriate command from the right-click menu or by pressing the F2 key. The Calculator dialog box enables you to enter any expression (Expression edit box) and calculate its value (Result edit box). You can use the following symbols in the Expression edit box: Addition (+) Subtraction (-) Multiplication (*) Division (/) Parentheses are acceptable.
247
When multiplication and division occur together in an expression, each operation is calculated as it occurs from left to right. When addition and subtraction occur together in an expression, each operation is calculated in order of appearance from left to right. Parentheses can be used to override the order of precedence and force some parts of an expression to be evaluated before others. Operations within parentheses are always performed before those outside. Within parentheses, operator precedence is maintained. SolidCAM enables you to use a set of standard mathematical functions like sine, cosine, etc. in your formulas. Functions can be either written manually in the Expression field or chosen from the Functions list. The Functions button enables you to display/hide the Functions list.
Example:
you have to write the expression: (158.8/2)/(tan(63/2)) The result (~129.56) is displayed in the Result field. To insert the calculated result into the field from where the calculator was started, click the OK button in the Calculator dialog box. SolidCAM standard functions
sqrt()
5. Operations
abs()
Returns a value of the same type that is passed to it specifying the absolute value of a number. The absolute value of a number is its unsigned magnitude. For example, and abs(1) both return 1.
abs(-1) acos()
Returns a value specifying the arctangent of quotient first and second arguments.
dist(,) and ang(,)
Returns polar coordinates: distance and angle (in radians) of the point defined in Cartesian coordinates.
pow(,)
Returns a value of the first argument raised to the power of the second argument. For example, pow(2,3) returns 8.
log10()
sum3( , , )
This page enables you to choose the appropriate Coordinate System and to define the Machining Geometry for the operation.
250
5. Operations
CoordSys This button enables you to define a Coordinate System for the operation. You can choose the Coordinate System for the operation by picking it in the list or by clicking on the CoordSys button and selecting chains on the graphic screen. The CoordSys Manager dialog box is displayed. Together with this dialog box, SolidCAM displays the location and axis orientation of all Coordinate Systems defined in the CAM-Part. The Coordinate System can be chosen from the list or picked directly on the model. To get more information about the Coordinate System, rightclick on its name in the list and choose the Inquire option from the menu. The CoordSys Data dialog box is displayed. After the Coordinate System selection, the model is rotated to the appropriate orientation. The selection of the Coordinate System must be the first step in the operation definition process. After the Coordinate System has been chosen, define the main geometry for the operation. If you have already defined geometries for this CAM-Part, you can choose a geometry from the list. When you choose a Geometry from the list, the related Coordinate System is being chosen automatically. Define This button enables you to define a new geometry for the operation. Show This button displays the model geometry in the SolidWorks window.
251
The 3D View section displays the image of the chosen tool. This image can be zoomed and rotated. Select This button enables you to edit the tool parameters or define the tool for the operation. When the tool is not defined for the operation, this button displays the View page of the Part Tool Table dialog box that enables you to choose the tool from the table or add a new one.
Choose the tool from the Part Tool Table and click on the Select button.
252
5. Operations
When the tool is defined for the operation, this button displays the Edit page of the Part Tool Table dialog box that enables you to edit the tool parameters and choose another tool from the list on the right or add a new one.
The following pages are available: The Tool Topology page (see topic 3.8.1) contains the Topology data of the tool, such as diameter, length, angle, corner radius etc. The Default Tool Data page (see topic 3.8.2) contains the default Tool Material data, Feed and Spin data and diameter and length offset numbers. The Tool Message page (see topic 3.8.3) contains the fields in which user messages are entered. The Tool Coolant page (see topic 3.8.5) enables you to define the tool coolant options. The Holder page (see topic 3.8.4) enables you to define the tool holder by choosing it from the global or local tool table and specifying the related parameters. The Shape page (see topic 3.8.6) enables you to choose a shaped tool for the operation.
253
Data This button displays the Operation Tool Data dialog box. This dialog box displays the tool material, feed and speed parameters and the diameter and length offset numbers used in the current operation. When the tool is chosen for the operation, SolidCAM fills this dialog box with the default data of the selected tool. The Operation Tool Data dialog box enables you to edit the tool parameters for the specific operation only.
Tool Material This section describes one or more of the following properties of the tool: Material (High Speed Steel, Carbide, etc.); Working conditions; Usage (rough, finish, etc.). The Tool Material is used to define the Speed and Feed defaults. When you choose the Tool material, the feed type is changed to FZ and the spin type to V. The Feed and Spin values are default system values since the Work material has not been defined yet. Loading the tool to an operation connects the Tool material to the Work material and the correct Feed and Spin values are loaded from the Speed/ Feed defaults table.
254
5. Operations
Spin This field defines the spinning speed of the tool by the following values: Spin rate normal spin rate; used in rough milling. Spin finish finish spin rate; used in finish milling. The Spin finish check box enables you to optionally define different values for Spin and Spin finish. When this check box is selected, the corresponding edit box is available so that you can edit its value. When this check box is not selected, the specified Spin rate value is used for both rough and finish machining.
rate
The spin value can be defined in two types of units: S and V. is the default and it signifies Revolutions per Minute. V signifies the material cutting speed in Meters per Minute in the Metric system or in Feet per Minute in the Inch system; it is calculated according to the following formula:
S V = (S * PI * Tool Diameter) / 1000 V = (S * PI * Tool Diameter) / 12
Feed This field defines the feed rate of the tool by the following values: Feed XY feed rate in the XY-plane. Feed Z feed rate in the Z-direction. Feed finish feed rate used for finish milling. The Feed finish check box enables you to optionally define different values for Feed XY and Feed finish. When this check box is selected, the corresponding edit box is available so that you can edit its value. When this check box is not selected, the specified Feed XY value is used for both rough and finish machining. Feed Link feed rate used for tool path linking movements when the Hatch strategy is chosen. Feed Lead in/out the feed rates used for approach and retreat tool movements. The feed value can be defined in two types of units: F and FZ.
255
F is the default and it signifies Units per minute. FZ signifies Units per tooth and is calculated according to the following formula: FZ = F/(Number of Flutes * S) 3D Model - Entry only
When this check box is selected, the defined Feed Z is used for vertical movements only. When this check box is not selected, the defined Feed Z is used for all movements when the Z-coordinate changes. This option is available only for the 3D Milling operation. Diameter offset number This parameter defines the number of the Diameter Offset Register of the current tool in the Offset table of the CNC-machine. Length offset number This parameter defines the number of the Length Offset Register of the current tool in the Offset table of the CNC-machine. Second offset number This parameter defines the register number of the upper cutting face offset, in the offset table of the CNC-machine. This option enables SolidCAM to automatically take into account the minor size differences between the defined tool and the one actually used for cutting the workpiece, if there are any. You may choose not to use this option by clearing the check box. This option is available only for the T-Slot operation.
256
5. Operations
This page enables you to specify the Z-levels at which the tool movements are executed. The default input values of these parameters are the CAM-Part values that you have specified in the CoordSys Data dialog box. To define the Milling levels, enter the values or use the appropriate buttons to pick the Z-levels on your 3D model. Start level This option defines the Z-level that can be optionally used for interoperational movements. The Start level button and the related edit box are available only if the Operation Start level option is chosen in Part Settings (see topic 2.10.2). The default Start level value is equal to the Part Clearance level value of the Coordinate System chosen for the operation. The Start level cannot be lower than the Operation Clearance level. If you are trying to save the operation in which the defined Start level is lower than the Operation Clearance level, the error message is displayed:
257
Clearance level This option defines the Z-level to which the tool retreats when it moves from one cut to another. Safety distance This option defines the distance to the Upper level at which the tool starts moving at the Z feed rate you have entered for the tool. Movements from the Clearance level to this height are performed in the rapid mode. Upper level This option defines the Z-level at which the machining starts. Lower level (Depth) This option defines the Z-level below which the tool does not mill in any milling strategy. Delta depth
Delta depth is the offset for the cutting depth that can be changed with its associativity preserved. This parameter is always relative to the Depth defined for the operation.
If the Delta depth value is positive, a blue arrow is displayed near its field indicating a positive offset value (in the positive direction of the Z-axis). If the Delta depth value is negative, a red arrow is displayed near its field indicating a negative offset value (in the negative direction of the Z-axis). The value of these parameters is the Z-coordinate. These parameters can be defined either by entering the value in the edit box or by picking a point on the solid model (except for Safety distance). In the latter case, the parameters are associative to the solid model. Associativity enables SolidCAM to be synchronized with the solid model changes. SolidCAM automatically updates the CAM data when the model is modified.
258
5. Operations
Depth associativity The following operation parameters are associative to the SolidWorks model.
Clearance level Upper level Lower level
SolidCAM enables you to define these parameters by picking the entities on the solid model. The Depth parameter used in some operations (Profile, Pocket, etc.) is indirectly associative. You have two possibilities: To define Depth by manual input. To define Lower level by picking on the model. In this case, Depth is calculated automatically. The associativity is established in Lower level. When either Upper level or Lower level is synchronized, Depth is updated. The associativity is saved only for the following picked items: Vertex Sketch point Reference point Part origin Planar face parallel to the XYplane of the current Coordinate System Plane parallel to the XY-plane of the current Coordinate System The Pick Lower level dialog box displays the Z-coordinate of the picked point. If the value is associative to the model, the edit box is highlighted in pink. When the parameter is defined by picking model entities, SolidCAM displays the Z-coordinate of the picked point in the related edit box. The background of the edit box changes. The value displayed in this edit box is associative to the solid model. When you type in this edit box, the associativity is removed.
259
The associative parameters are displayed in SolidCAM Manager under the operation name. When the parameters are not synchronized, the parameters and the parent operation are marked with the synchronization mark .
The synchronization commands are available for operations in the right-click menu.
The Synchronize command enables you to synchronize the values of the parameters with the updated model. The Synchronize & Calculate command enables you to synchronize the values of the parameters with the updated model and calculate the operation after the synchronization.
260
5. Operations
The Check Synchronization command enables you to check the model for updates affecting the specified parameter. The Break Z-Levels Associativity/Break associativity command enables you to break the associativity between Z-Levels parameters and the solid model. The confirmation message is displayed. The Show command highlights the model entity with which the depth parameter is associated. The Show Geometry dialog box is displayed. The Exit button enables you to return to the normal model view. When the synchronization fails, SolidCAM marks the operation and the parameters with the exclamation mark. The parameters definition can be edited in the operation dialog box. You have to either type the necessary values or redefine the points on the model. In the first case, the associativity is removed. Interoperational tool movements SolidCAM enables you to perform the interoperational tool movements either through the Part Clearance level (same for all operations of the CAM-Part) or through the Operation Start level (can be different from the Part Clearance Level and vary for each operation). Interoperational tool through Part Clearance level SolidCAM performs the interoperational movements through Part Clearance level when two neighboring operations use the same Tool (and Tool offset) and Coordinate System.
Part Clearance Level Operation Clearance Level Safety distance Safety distance
Machining levels
261
Interoperational tool through Operation Start level You can change the level where the interoperational movements are performed for the specific operations when the same Coordinate system, Tool and Tool offset are used. This mode enables to reduce the rapid movements, especially between machining areas located significantly deeper than the Part Clearance level. In this mode, the tool performs interoperational movements at the Operation Start level, which can be different from the Part Clearance level. The Operation Start level can be specified separately for each operation. When the operation cuts are finished, the tool moves to the Operation Clearance level with the Rapid feed.
Part Clearance Level Operation Start Level Operation Clearance Level Safety distance Operation Clearance Level Machining levels
Safety distance
262
5. Operations
If the Start level of the next operation is higher than the Operation Clearance level, the tool ascends to the Start level of the next operation, then performs XY-movement and descends to the Operation Clearance level of the next operation. All these movements are performed with the Rapid feed. The tool will then perform the rapid movement to the Safety Distance level of the first cut and start the descent to the first cut with the working feed.
Next Operation Start Level Next Operation Clearance Level
If the Start level of the next operation is lower than the Operation Clearance level, the tool performs the XY-movements at the Operation Clearance level and than descends to Clearance level of the next operation without stopping at the Start level. All these movements are performed with the Rapid feed. The tool then performs the rapid movement to the Safety Distance level of the first cut and starts the descent to the first cut with the working feed.
Previous Operation Clearance Level Next Operation Start Level Next Operation Clearance Level Safety distance Operation Last cut Operation First cut
263
All of these rules are relevant only when there is no Tool change, Tool offset change and Coordinate System change between the operations. If there are such changes, the Operation Start level is ignored and SolidCAM performs the tool movement through the Part Clearance level.
264
5. Operations
Advanced sort This option enables you to define the machining order in case the operation geometry is composed from several chains. The button displays the Advanced Sort dialog box (see topic 6.6.3) that enables you to define the order of sorting of the chains included in the operation geometry. At the first stage, SolidCAM calculates the box surrounding each chain. This box is used to determine the reference point that will be used for the advanced sorting. For Linear sorting strategies, the reference point is automatically defined in the box corner corresponding to the start position defined by the sorting strategy. For example, if the start position of the chosen sorting strategy is the upper position (with the maximal X- and Y-coordinates), SolidCAM automatically chooses the upper left corner of the chain box to be the reference point. For Circular sorting strategies, the reference point is automatically chosen in the center of the calculated box. When the reference points are defined for all chains, SolidCAM performs their sorting in the manner similar to the sorting of the drill positions. The resulting order of the reference points after the sorting defines the order of the chains. Final cuts This option enables you to divide the machined depth into two regions, each with its own Step down, when the Step down of the bottommost region is smaller. The Final cuts dialog box enables you to define the parameters of the final cuts machining. When the Final cuts used check box is selected, the option is used. The Number of steps value defines the number of final cuts. The Step down value defines the distance between two successive final cuts.
Step down
Step value
Final cuts
265
When the Final cuts option is used, SolidCAM performs the machining with the Operation Step down from the Upper level till the Depth calculated according to the following formula:
Depth - Number of cuts * Step down
From this depth, the machining is performed in a number of cuts determined in the Final cuts dialog box. The machining is performed in such manner until the full operation depth is reached. The Final cuts button is available only for Profile, Pocket and Contour 3D operations. In the Contour 3D operation, the Tool side must be set to Left or Right. When this option is used, the check box on the button is selected. Wall draft angle This option enables you to perform the machining of inclined walls with a draft angle constant along the entire geometry. When you click on the Wall draft angle button, the Wall Draft Angle dialog box is displayed.
When the Wall draft angle check box is selected, the inclined wall machining is performed.
266
5. Operations
The Wall draft angle button is available only for Profile and Pocket operations. In the Profile operation, the Depth type must be set to Constant or Define. When this option is used, the check box on the button is selected.
External wall angle This parameter defines the draft angle of the wall measured from the Z-axis direction as shown. For the inclined wall machining, each cutting pass located at a specific Z-level is generated according to the specified External wall angle value. Island wall angle This parameter defines the draft angle of the island walls measured similar to the External wall angle parameter. This parameter is available only for the Pocket operation. For the inclined wall machining, each cutting pass located at a specific Z-level is generated according to the specified External wall angle/Island wall angle value.
267
External corner type This option enables you to define how the cutting passes will be connected during the external corners machining. There are three ways to connect between the cutting passes:
Sharp corner
The tool path is calculated to perform the machining of a sharp corner. This option affects only the machining of geometry sharp corners.
Geometry
Conical fillet
The tool path is calculated to perform the machining of the corner with a conical fillet; the radius of the tool path rounding increases from one pass to the next. This option affects only the machining of sharp geometry corners.
Geometry
268
5. Operations
Cylindrical fillet
This option affects the machining of both of sharp and filleted corners of the geometry. The machining of sharp corners is performed similar to the Conical fillet option. For the filleted corners, the tool path is calculated to perform the machining of the corner with a cylindrical fillet; the radius of the tool path rounding is the same for all cutting passes.
Geometry
Trochoidal milling This option enables you to replace the straight lines in a tool path by circular moves with a constant radius.
The Trochoidal button is available only for Profile, Pocket and 3D Milling operations. In the Profile operation, the Depth type must be set to Constant. In the 3D Milling operation, the Hatch or Contour strategy must be chosen. When this option is used, the check box on the button is selected.
269
Making the constant circular curve the only direction change enables a high feed rate to be consistently maintained.
Longer tool life
The cutting edge is in contact with the material through only about 5% of the cutters revolution vs. up to 50% for more conventional cutting. Cooling of the tool is improved. The Trochoidal dialog box enables you to define the parameters of trochoidal milling.
Radius
This field defines the radius of the circle that describes the movement of the tool.
Step
This field defines the distance between the centers of two adjacent circles that describe the tool movement.
Radius Tool trajectory
Step
Engagement angle
This field defines the angle measured between two vectors describing the area of contact between the tool and the machined material. During the calculation, SolidCAM checks the engagement angle at each tool position defined by the Step parameter. If the engagement angle is greater than the specified Engagement angle value, SolidCAM at this position performs a circular tool movement with the radius defined by the Radius parameter. If the engagement angle is smaller than the specified Engagement angle value, SolidCAM does not generate a circular movement at this position; the tool moves to the next position.
Engagement angle
270
5. Operations
Plunging
Plunging
is a technology of removing material from a given area using a special tool. Instead of milling the material, the tool moves up and down as in a drilling motion, travelling along the path type you choose. The Plunging button is available only for Profile and Pocket operations. In the Profile operation, the Depth type must be set to Constant. When the Plunging option is used, the check box on the button is selected.
The Plunging dialog box is displayed. Step This field defines the distance between each two adjacent vertical plunging movements of the tool. Drill cycle type SolidCAM enables you to choose preferable drilling cycles for the plunging operation. 1. Click on the Drill cycle type button and choose the cycle type you want in the Drill cycle dialog box. 2. Click on the Data button and specify the parameters in the Drill options dialog box. For more information on the Drilling cycles, see topic 6.6.3.
271
This page enables you to define the parameters of approach and retreat of the tool, linking between tool paths, etc.
This page contains the miscellaneous parameters of the operation. Message You can type a message that will appear in the generated GCode file.
G43G0 X-49.464 Y-38.768 Z12. S1000 M3 (Upper Face Milling) (--------------------------) (P-POCK-T2 - POCKET) (--------------------------) G0 X-49.464 Y-38.768 Z10.
272
5. Operations
Extra parameters This field is available only when special operation options have been implemented in the post-processor you are using for this CAM-Part. Click on the Parameters list button. The Operation Options dialog box is displayed with the additional parameters defined in the post-processor.
Gouge check This option enables you to perform gouge checking after the calculation of 2.5D Milling operations. During this checking, SolidCAM detects all the gouges between the tool and the target model and informs about the positions where these gouges occur. The Check gouges during calculation check box enables you to perform the gouge checking directly after the tool path calculation. You can also define the gouge checking tolerance in the corresponding edit box. If gouges are detected during this checking, SolidCAM informs you about their location on the model by displaying the coordinates in the Check gouges dialog box and dots showing the gouge positions on the model in the graphic area.
273
In this dialog box, the check boxes enable you to control the visibility of the gouge positions on the model. When a check box is selected, SolidCAM displays the corresponding gouge position on the model with a cyan dot. When a check box is not selected, the related gouge position is not highlighted on the model. The Show All button enables you to display all of the detected gouge positions on the model by selecting all of the check boxes. The Hide All button enables you to hide all of the detected gouge positions from the model by clearing all of the check boxes. Approximation of arcs This option enables you to control the process of arcs approximation at the operation level. The Approximate arcs by lines check box that enables you to control the existence of arcs in the GCode output for the current operation. When this check box is selected, SolidCAM approximates all tool path arcs by lines. The precision of the approximation depends on the arc_max_chord and arc_max_angle parameters located in the MAC file; the resulting GCode does not contain arcs. When this check box is not selected, the resulting GCode might contain arcs.
274
5. Operations
1. In SolidCAM Manager, rightclick on an operation. 2. Move to the Add submenu and choose the type of operation you want to define.
When you add an operation by right-clicking on the Operations header, the new operation is added at the end of the operations list. When you add an operation by right-clicking on an existing operation, the new operation is inserted after the selected operation.
5. Operations
5.3.6 Edit
This command enables you to view or change the definition and parameters of an existing operation. If you select this command, the corresponding operation dialog box is displayed and you can change the operation definition.
277
5.3.11 Simulate
You can simulate and verify operations that have been saved and calculated. For more information on Simulation, refer to chapter 10.
5.3.12 File
This option enables you to append ASCII files with the GCode to your CAM-Part.
5. Operations
Add Operation Group to Machining Process Table This option enables you to insert the selected operation group into the current Machining Process Table. When the operation group is added, the following message is displayed:
Remove Operations from Operation Group This option removes the selected operation from the operation group. Explode Operation Group This option turns the operation group into single operations.
5.3.14 Cut/Copy/Paste
SolidCAM enables you to cut, copy and paste operations. The Copy command copies the selected operations into the clipboard. The Paste command inserts the operations from the clipboard, after the selected operation. The pasted operations are marked by an asterisk; they must be calculated to obtain the tool path. If the clipboard is empty, the Paste command is unavailable. The Cut command cuts the operations and copies them into the clipboard. When the operations are pasted from the clipboard, the source operations are removed.
5.3.15 Rename
SolidCAM enables you to rename a specific operation. Right-click on the operation name in SolidCAM Manager and choose the Rename command from the menu. The Operation Rename dialog box is displayed. This dialog box enables you to assign a new name to the operation.
279
This option enables you to change the tool used in a particular operation directly from SolidCAM The Tool dialog box is displayed so that you can choose another tool.
The All operations as first check box enables you to define the listed tool parameters in all operations identically to the first operation.
280
5. Operations
5.3.18 Info
This option enables you to obtain the summary of a specific operation directly from SolidCAM Manager without opening the operation. The Info dialog box is displayed with the information of the selected operation. It contains Tool information (diameter, corner radius, taper angle and lengths); Operation Tool data (Feed and Spin parameters) and Levels (Upper level, Depth and Step down). The icon located in the title bar enables you to pin/unpin the Info dialog box.
5.3.20 Suppress/Unsuppress
SolidCAM enables you to suppress any operation in the CAM-Part, thus temporarily excluding it from the CAM-Part. When you suppress an operation, the operation does not participate in the calculation, simulation and GCode generation, as if the operation was deleted from the CAM-Part. In the SolidCAM Manager tree, the names of suppressed operations appear in gray. The tool path check box is disabled for the suppressed operations. The Suppress/Unsuppress command is available via the right-click menu, for a single operation or a list of operations.
281
When the selected operations are not suppressed, right-click on the list of selected operations and choose Suppress. All selected operations are suppressed. When the selected operations are suppressed, the Unsuppress command available in the right-click operation menu unsuppresses the selected operations. When the list of selected operations contains both suppressed and unsuppressed operations, both Suppress and Unsuppress commands are available in the right-click menu. The Suppress command suppresses all the unsuppressed operations in the list. The Unsuppress command unsuppresses all the suppressed operations in the list. Editing suppressed operations SolidCAM enables you to edit a suppressed operation. However, the Save & Calculate, Simulate and GCode buttons are unavailable.
282
5. Operations
Tool path When an operation is suppressed, SolidCAM re-generates the CAM-Part tool path to exclude the tool path data related to the suppressed operations. The tool path stays unchanged till the parameters of the operation are updated. During the unsuppressing of the suppressed operation, the CAM-Part tool path is re-generated in order to include the data of the unsuppressed operations. Suppressing linked operations
3D Drilling operation + 3D Milling operation
When the Suppress command is applied to the 3D Drilling operation, the result is the following: The 3D Drilling operation is suppressed; The tool path of the related 3D Milling operation is removed and the operation appears marked with asterisk. When the Suppress command is applied to the 3D Milling operation, only this operation is suppressed. Both 3D Milling and related 3D Drilling operations must be selected in order to be suppressed together.
283
5.4 Managing Operations in the SolidCAM Manager tree 5.4.1 Operation Sequence
You can change and rearrange the sequence of operations in the SolidCAM Manager. Drag the operation to its new place in the operation list.
5.4.3 Split
This command enables you to separate your list of operations before the GCode generation. If you place splits after operations and click GCode All, separate NC-programs are generated for each operation or group of operations located between the corresponding splits. Each split has a name and acts like a folder containing operations, fixtures, etc. In this example, you receive three separate GCode files for the operations divided by the splits. Adding splits 1. Right-click on the operation after which you want to insert a split. 2. Choose the Split command from the menu. 3. Enter the split name in the Split dialog box.
3. The split is inserted. The (-) icon located near the split icon enables you to collapse/expand all the items (operations and fixtures) located under the split.
284
5. Operations
Managing splits
Add
This command enables you to add an operation to the list of operations that belong to the current split.
This command enables you to add a Machining Process to the list of operations that belong to the current split.
GCode
These commands enable you to generate and list GCode files for the operations that belong to the chosen split. The GCode file generated for each split is automatically saved in the CAM-Part folder.
285
User documentation
These commands enable you to generate and edit the documentation that contains the data about the operations that belong to the current split.
Delete
This command enables you to delete a split item. The confirmation message is displayed. Confirm it by clicking on the Yes button.
Rename
This command enables you to edit the split name in the Split dialog box.
Suppress/Unsuppress
This command enables you to suppress/unsuppress the split with all of its contents. Just like re-sequencing operations, you can move a split mark to another location in the operation list. Drag the split mark on the operation after which you want to insert it.
5. Operations
The right-click menu available on the tool entries enables you to change the tool and manage the tool data for multiple operations where the same tool is used. Change tool This option enables you to change the selected tool directly from SolidCAM Manager. The Tool dialog box is displayed so that you can choose another tool (see topic 5.3.16). Change tool data This option enables you to manage the tool data for multiple operations where the selected tool is used. The Operation Tool Data dialog box is displayed.
The List operation section displays the list of operations that use this tool. The Show all operations using the current tool check box enables you to include in this list all of the CAM-Part operations in which the current tool is used. When this check box is not selected, the List operation section displays only the operations that belong to the current tool entry chosen in the SolidCAM Manager tree. The All checked operations as selected one check box enables you to apply the parameters defined in the dialog box to all the checked operations.
287
5. Operations
Move drills to end: this option moves all drills not tagged as center drills to the end of the operation list. The following is the order of precedence if more than one option is chosen. 1. CoordSys 2. Upper level 3. Use Center drill first 4. Sort Drill radius 5. Move Drills to end Undo Sort This option returns the automatic sort to the original order.
289
290
5. Operations
The operation transformations are enabled only if your CNC-machine controller supports the corresponding function.
This option enables you to add a copy of the selected operation and apply the transformation to the copied operation, without effect on the original operation. The transformed copy is inserted immediately after the original operation in the SolidCAM Manager tree. The original operation can be suppressed by selecting the appropriate check box in the Options section.
New operation (add at end of operations tree)
This option also enables you to add a copy of the selected operation and apply the transformation to the copied operation, without effect on the original operation. The transformed copy is inserted at the end of the operation list in the SolidCAM Manager tree. The original operation can be suppressed by selecting the appropriate check box in the Options section.
291
5.5.2 Options
This section contains two check boxes that enable you to manage the original operation:
Include original operation
When this check box is selected, the original operation is included in the transforming action.
Suppress original operation
When this check box is selected, the original operation is suppressed, and the transformation is applied only for the operation copy. This check box is available only when a new operation is added for transformation.
Operation name
This column displays the list of operations to be transformed. In case of adding a new operation, the operation copy receives the Transform_ prefix with the sequential number of transformation. When an additional transformation action is defined on the existing transformation, the Transform_ prefix is added with the next sequential number, and the names of the previously transformed operations move under the new transformation.
292
5. Operations
Transformation
This column displays the type of transformation action to be performed on the selected operations. The following types of transformation are available: rotation, translation, mirroring and repeating the tool path using the fourth axis.
Description
This column displays the details of transformation parameters defined for the current operations.
If you want to cancel the transformation defined for operations with inheritance, exit the Operation Transformations dialog box and delete the operation copy in the SolidCAM Manager tree.
293
Rotate This button enables you to define the tool path rotation around the Z-axis of the CoordSys origin or around the Z-axis passing through a defined point. The rotation can be performed using two options:
Delta
Several rotations are performed from a start angle with a uniform delta angle. The Rotate Delta dialog box is displayed.
1. Enter the Number of Rotations. 2. Start angle enter the start angle (+/-) relative to the positive X-axis. 3. Delta angle enter the delta value (+/-) between two rotation steps. 4. Confirm with the OK button.
List
This option copies the operation tool path to a list of angle locations defined by their angle relative to the positive X-axis. The Rotate list dialog box is displayed. 1. Enter the value of the angle and the number of rotations. 2. Click on the Add button to add the angle to the list of angles. 3. Confirm with the OK button. To edit an angle value in the list, click on the corresponding entry in the Value column and enter the new value. To delete an entry from the list, select it and click on the Delete Selected button.
294
5. Operations
Translate This button enables you to copy the operation tool path to a rectangular matrix of locations (the Matrix option) or to a list of locations defined by their X-, Y- and Z-coordinates (the List option).
Matrix
This option copies the operation tool path to a rectangular matrix of locations. When you choose this option, the Matrix dialog box is displayed. Number of rows: enter the number of rows. Number of columns: enter the number of columns. X Step: enter the delta value between each two columns. Y Step: enter the delta value between each two rows. Rows first: the operation tool path is first copied horizontally, and then vertically in the defined matrix of locations. Columns first: the operation tool path is first copied vertically, and then horizontally in the defined matrix of locations.
List
This option copies the operation tool path to a list of locations defined by their X-, Y- and Z-values. The origin of the operation is moved to the absolute XYZ-position defined in the Translation List dialog box. 1. Enter the values of the absolute XYZ-position where the operation should be executed (separate the values by commas or spaces) or pick a point on the model. 2. Click the Enter button to add the position to the Translation list. 3. Confirm with the OK button. To edit a position in the translation list, select it, enter the new values for this position into the Offset value edit box and then click on the Enter button. To delete a position from the translation list, select it and press the Delete key.
295
Mirror This button enables you to mirror the operation tool path relative to the X, Y or both axes. The point about which the operations are mirrored is either the CoordSys position or the Mirror/Rotate point defined in the operation. The Mirror dialog box is displayed. 1. Click on the corresponding button to define the axis around which the operations are mirrored: X mirrors around the X-axis. Y mirrors around the Y-axis. XY mirrors around both the X- and the Y-axes. Reset enables you to clear the entry field. 2. Confirm with the OK button. 4th Axis This option enables you to execute 4-axis rotations of an operation tool path. After the 4th axis is rotated, the operation is executed again. When you choose this option, the Rotate list dialog box is displayed. 1. Enter the value of the angle and the number of rotations. 2. Click on the Add button to add the angle to the list. 3. Confirm with the OK button. To edit an angle value in the list, click on the corresponding entry in the Value column and enter the new value. To delete an entry from the list, select it and click on the Delete Selected button. Synchronize This button enables you to perform synchronization of the operation copies with their original operations, in case of changes to the original operations. Note that this button is available only for the defined transformation with inheritance.
296
5. Operations
When you click on this button, the Synchronization of operations technology dialog box is displayed.
When the original operation has been edited, this option enables you to synchronize the operation copy with the performed changes.
Synchronize the technology of all operations with original operation
When transformation is defined for multiple operations and the original operations have been edited, this option enables you to synchronize the operation copies with the changes made in the original operations.
297
5.6 Fixture
SolidCAM enables you to define the Part Fixtures such as clamps, vises, jig plates, etc.
This feature enables you to get a more realistic picture during the simulation and check possible collisions between the cutting tools and fixtures. 1. Right-click on an operation entry in the SolidCAM Manager tree and choose Define Fixture. 2. The Fixture dialog box is displayed. This dialog box enables you to define the fixture geometry.
298
5. Operations
Define 3D Model This button enables you to select the 3D model for the fixture. The 3D Geometry dialog box is displayed.
Show on Model With this button, you can highlight the selected fixture model in the SolidWorks window.
299
Show With this button, you can display the Fixture in the Rest Material window of SolidCAM. Self-intersections The Check and fix button in the Self-intersections section enables you to check the model for selfintersections (see topic 10.6.6) and fix them if they are found. When self-intersections are detected, the following message is displayed:
Confirm it with the Yes button to fix the self-intersections. Note that the process of self-intersection fixing can take a long time to complete, depending on the complexity of the model. When the fixture is defined, SolidCAM adds the Fixture item to the SolidCAM Manager tree. SolidCAM enables you to define any number of fixtures that can be used at different stages of the CAM-Part.
300
2.5D Milling
SolidCAM enables you to perform a number of standard 2.5D operations like profile, pocket, slot machining, etc. These operations can be performed using 2D sketches as well as solid models. Full tool path control and powerful algorithms ensure that your manufacturing will be performed in accordance with your plans.
Profile Operation Pocket Operation Drilling Operation Slot Operation Translated Surface Operation
302
6. 2.5D Milling
This page enables you to specify the Z-levels at which the tool movements are executed.
This page enables you to define the technological parameters of the Profile milling.
303
Modify The Tool side option enables you to define the tool position relative to the geometry.
Left Right Center
Right: the tool cuts to the right of the profile geometry at the distance defined by the values set in the Modify offset section of the Modify Geometry dialog box. Left: the tool cuts to the left of the profile geometry at the distance defined by the values set in Modify offset section of the Modify Geometry dialog box. Center: the center of the tool moves on the profile geometry. The compensation cannot be used with this option. When the Zigzag option is used, the Tool side combo-box defines the tool location for the first cut. For each successive cutting pass, the tool position is changed relative to the geometry direction.
Geometry
This button enables you to modify a geometry shared by several operations separately for each operation. The geometry modification is supported for Profile, Contour 3D, T-Slot and Translated Surface operations. Geometries shared by several operations can be modified separately for each operation. The geometry modification includes assigning different values to the Extension, Offset and Define Start parameters of the geometry, and also choosing which geometry chains are active in the operation (in case of multiple chain geometry). The modification is relevant only for the current operation and does not affect other operations where the geometry is used.
304
6. 2.5D Milling
The Modify Geometry dialog box enables you to perform the geometry modification for the current operation.
Tool side
This option enables you to define the position of the tool relative to the geometry.
Chains
This section displays the list of all geometry chains participating in the current geometry. The check box located near each chain name in the list enables you to include/exclude the chain from the geometry of the current operation. The right-click menu available on the elements of the list enables you to perform the following actions: The Check All command enables you to check all the chains. The Uncheck All command enables you to uncheck all the chains. The Invert Check States command enables you to reverse the state of the check boxes. The Reverse command enables you to reverse the direction of the chain. The Reverse All command enables you to reverse the direction of all chains.
305
Start/End Extension
This section enables you to define the extension for the selected chain. The Start and End parameters define the start and end extension lengths. The extension is performed tangentially to the chain entities at the start and end points of the geometry chain. The start and end elements are determined according to the chain direction. When a negative value is defined, SolidCAM shortens the chain by a distance measured along the chain elements and specified by the Start and End parameters. These parameters can be defined either by entering the values or by picking on the model (when the cursor is placed in the edit box).
Start extension End extension
Geometry chain
The Apply to all button enables you to apply the extension defined for the selected chain to all chains of the geometry.
Modify offset
This section enables you to define the offset for the Machining Geometry selected chain. Machining is performed at the specified offset.
Modify offset
306
6. 2.5D Milling
Geometry chain Modify offset
Modied chain
SolidCAM enables you to define the Modify offset parameter by entering the value or by picking on the model (when the cursor is placed in the edit box). The Apply to all button enables you to apply the Modify offset value defined for the selected chain for all the chains of the geometry. The direction of the Modify offset parameter for open contours is defined according to the chain direction. In case of a positive value, the offset is defined to the right side of the chain (according to the chosen chain direction). In case of a negative value, the offset is defined to the left side of the chain (according to the chosen chain direction). For closed contours, a positive Modify offset value defines the offset to the outside of the geometry; a negative Modify offset value defines the offset to the inside of the geometry The Take 1/2 from selected offset option enables you to offset the chain by half of the defined offset value.
307
Negative offset Geometry chain
Positive offset
Negative offset
In the part shown below the central pads should be machined with a single straight cutting pass located in the middle of the pad. After defining the geometry at the edge of the pad, the geometry is offset using the picked position at the opposite edge and the Take 1/2 from selected offset option.
Modied geometry
Geometry
Start position
When the Default option is chosen, the start position is calculated automatically using the SolidCAM internal algorithm. When the Shift option is chosen, you to define the shifting of the start position for closed chains. The shifting of the start point is defined as a percentage of the chain length. You can define the start position shifting either by entering the Shift value or by picking the position on the model. For open chains, this section is disabled. The Apply to all button enables you to apply the Shift value defined for the selected chain to all closed chains of the current geometry. The Auto next button enables you to define the start points successively for all closed chains by picking the positions on the model. When this mode is activated, the first closed chain is highlighted, enabling you to pick the start position for it. When the position is picked, SolidCAM switches to the next closed chain and so on. The Resume button enables you to finish the automatic definition of the next start positions. The Set default button enables you to return the start position of the current chain to its initial state. When the Apply to all check box is activated, the Set default button returns the start positions of all chains to their initial state.
308
6. 2.5D Milling
Compensation
When the Compensation check box is selected, the tool radius compensation options G4x of the CNC-controller are used in the GCode.
No compensation
When the Compensation check box is not selected, SolidCAM generates a trajectory of the tool center as an offset by the tool radius from the geometry.
Tool center trajectory
Geometry
When the Compensation check box is selected, SolidCAM generates the trajectory of the tool center as an offset by the tool radius from the geometry.
Tool center trajectory
Geometry
At the next stage, SolidCAM creates the tool path as the offset by the tool radius from the tool center trajectory. The offset is created in the geometry direction.
Tool center trajectory
Tool path
The GCode is created for the tool path. The radius compensation is used in the GCode. The Offset value is equal to the Tool radius.
309
Zero Compensation
SolidCAM calculates the trajectory of the tool center as the offset from the geometry.
Tool center trajectory
Geometry
This trajectory is used in the GCode. The radius compensation is used. The Offset value is equal to 0.
Settings
SolidCAM enables you to define the type of compensation used by the specific variable in the MAC file.
Comp_by_zero_tool = N the Radius compensation is used. Comp_by_zero_tool = Y the Zero compensation is used.
When the compensation is used for the tool path linked using the Zigzag option, SolidCAM takes into account the machining direction and the changes in the tool position relative to the geometry direction for each successive cut. The different compensation commands are used in the GCode output for even and odd cuts. Depth type This option enables you to choose the depth type for the profile. Constant SolidCAM generates a tool path with a constant depth as defined in the Milling levels area.
310
6. 2.5D Milling
Variable (Define) You can define a different depth at different profile points. 1. Choose the Define option. 2. Click on the Pick button. The Define depth dialog box is displayed. This dialog box enables you to control the points where the depth changes. The X,Y,Z dialog box enables you to enter the coordinates of the depth change points.
Switch between the Select and the Unselect mode to define or remove points where the depth changes. The Undo button cancels or restores the last selection. You can specify a certain chain in the profile geometry using the combo box with the profile number and the Next Profile button. The Points field contains information about selected depth changing points. You can change the point properties by double-clicking the parameter in this area. Profile No. the Profile geometry chain number. Z the Z-coordinate of the profile depth at the specified point. Type the type of depth change:
Vertical: Sloped:
the depth changes at specified points. the depth changes gradually over the tool path segment.
Vertical type
Sloped type
Select the depth change point on the profile. The Depth dialog box is displayed. In this dialog box, specify the depth and the type of depth change.
311
Helical This option enables you to enhance the productivity of profile machining by avoiding lead in/out movements at each Z-level and unnecessary rapid movements. With this option, the tool performs the spiral movements around the geometry with the continuous lowering along the Z-axis. For each turn around the geometry, the tool moves downward along the Z-axis according to the step down value. When the Profile depth is reached by the spiral movements, SolidCAM performs the last cut with the constant Z movement at the Profile depth level.
Step down
Rest Material/Chamfer The Rest material option enables you to define parameters to remove the rest material left unmachined after previous operations.
Rest Material
The Chamfer option enables you to machine chamfers with a Center drill tool. Rest material In Profile Machining, when a large tool is used around the profile, the tool leaves material in corners it cannot enter. The Rest material option enables you to remove the material from this area without defining a new geometry.
312
6. 2.5D Milling
The Rest Material dialog box is displayed. You have to define the following parameters: Previous tool diameter the diameter of the rough end mill used in the previous operation. The button enables you to display the Part Tool Table and select the previously used tool so that its diameter appears in the edit box. Previous wall offset the wall offset of the previous operation. Extension the overlap distance that you would like to start and end from the previous larger end mill.
Extension
Milling type
Rest Material
Separate areas
SolidCAM generates a profile tool path to clean areas that the previous tool could not mill.
Around profile
SolidCAM machines the whole closed profile to mill the rest material.
313
Chamfer This feature in Profile, Pocket and Contour 3D operations enables you to use a drill tool as well as a taper tool to add a chamfer to the edge of a part.
In the Tool page of the operation dialog box, click on the Select button. The Part Tool Table dialog box is displayed. Choose a drill tool for the chamfering.
In the Levels page of the operation dialog box, enter the size of the chamfer edge in the Profile depth field. In the Technology page of the operation dialog box, choose Chamfer from the Rest Material/Chamfer list and click the Data button.
314
6. 2.5D Milling
tool;
Feed
Cutting diameter
Cutting diameter
When the Cutting diameter value is greater than the lower diameter of the taper tool cone, you can move the tool tip outside the chamfer. In such a way, the machining is performed by the conical part of the tool that can avoid the burr formation on the chamfer edge. If you choose to chamfer a part that has a sharp corner, it is important that the cutting diameter is the same as the last tool used in that geometry so that the chamfer is equal all around. Fillet size for last cut This option enables you to add a radius to a sharp corner without the need to change the geometry.
6 6
This option is relevant for Profile, Pocket, Slot (Constant depth type) and the 3D Milling (Roughing and Constant-Z finishing) operations.
315
Internal
This field defines the radius of external corners. The maximum external fillet size is defined in SolidCAM Settings (see topic 12.4.4). In the Profile operation, this option is not available when the Tool side is set to Center. Offsets SolidCAM enables you to specify the machining allowances that can be removed either by profile finishing in the same operation or in another operation.
Wall offset
Internal llets
This option defines the offset that will remain on the wall of the machined part after roughing.
Step down Prole depth
Wall offset
316
6. 2.5D Milling
Floor offset
This option defines the offset that will remain on the floor of the machined part after roughing. When the Floor offset value is specified, SolidCAM performs the machining by the Z-levels defined with the Step down parameter. The machining is performed up to the Floor offset.
Step down Prole depth
Floor offset
The Wall offset and Floor offset parameters are available only when the Rough section is activated. Clear offset This option generates several concentric profiles with constant depth that start at the defined clear offset distance from the profile and finish at the geometry of the profile, thus clearing the area around the profile. The Offset option defines the distance from the geometry at which the milling starts. The Offset value must be equal to or greater than the Wall offset value. The tool starts milling the profile at the distance defined by Clear offset and finishes at the distance defined by Wall offset. The Step over option defines the overlap of adjacent tool passes. It determines the offset between two successive concentric profiles.
Step over
Wall offset
Clear offset
Modify offset
317
The Zigzag option enables you to create the tool path for the Clear offset removal containing both climb and conventional movements.
Clear offset tool path
Prole geometry
The One way option enables you to create the tool path for the Clear offset removal containing only climb movements.
Clear offset tool path
Prole geometry
Rough
This section enables you to perform the profile rough machining. Step down Profile roughing is performed in constant Z passes. The Step down value defines the distance between each two successive Z-levels. The cutting passes are calculated using the Clear offset strategy with the specified Offset and Step over parameters and taking into account the specified Wall offset and Floor offset parameters.
Step down Upper level
Prole depth
318
6. 2.5D Milling
Finish
SolidCAM enables you to generate several finish passes to achieve the best surface quality. You can define the number of finish passes.
Extension/Overlap
This option enables you to extend the profile in the positive profile direction.
Step down
This parameter defines the distance between each two successive Z-levels. During the profile finishing, the machining of the floor area is performed first, then the finishing of the walls is performed.
Step down
The floor area is machined in a single cutting pass at the Profile depth level. This cutting pass is calculated using the Clear offset strategy with the specified Offset and Step over parameters and taking into account the Prole specified Wall offset. depth
319
The wall finishing is performed from the Upper level down to the Profile depth in a number of steps defined with the Step down parameter. Equal step down Machining of Profiles and Pockets starts from the Upper level and is performed in a number of successive Z-levels till the specified Depth. This option enables you to keep an equal distance between all Z-levels. When the Equal step down check box is not selected, the distance between each two successive Z-levels is determined by the Step down parameter. If the machining depth is not divisible exactly by the Step down value, the depth of the last cut is smaller than the Step down value. When the Equal step down check box is selected, an equal distance is kept between all Z-levels. Using this option, you have to specify the Max. Step down parameter instead of the Step down parameter. According to the Depth defined in the operation and modified with the Floor offset and Delta depth parameters, SolidCAM automatically calculates the actual step down to keep an equal distance between all passes, while taking into account the specified Max. Step down so that it is not exceeded. The Equal step down option is available only for Profile and Pocket operations.
Prole depth Step down
Step down
320
6. 2.5D Milling
Depth cutting type This section enables you to define the direction of Z-levels machining and the connection between passes. When the One way option is chosen, the cutting passes are oriented in the same direction and connection between them is performed through the Operation Clearance level. At the end of each pass the tool performs a retreat movement to the Operation Clearance level, a horizontal movement at rapid feed to the start point of the next pass and then descends to the Z-level of the next pass. The same cutting direction (climb or conventional) is kept along the whole tool path. When the Zigzag option is chosen, the tool path is performed in a zigzag manner, with the tool path direction changing from one pass to the next. The passes located at two successive Z-levels are connected directly from the end of one pass to the beginning of the next pass. The Zigzag option cannot be used together with the Clear offset technology. Complete Z-level/Sort by chains These options enable you to define the order of Z-levels milling in the machining of several profiles in one operation. These check boxes are not available when the Zigzag option is chosen for and when the Helical or Define option is chosen for
The Sort by chains check box is available only when the Complete Z-level check box is selected and the Clear offset option is used with the One way option. When the Rough and Finish strategies are used together in the same Profile operation, the Complete Z-Level check box is not available.
321
Rough machining When the Complete Z-Level check box is selected and the Clear offset strategy is not used, SolidCAM enables you to generate the following tool path: machining of all chains at a specific Z-level is performed; when machining of this level is completed, the tool moves down to the next level, and so forth.
1 3 5 7 9 11 12 2 4 6 8 10
When the Complete Z-Level check box is not selected and the Clear offset strategy is not used, the machining is performed by chains: the tool completes the machining of a specific Z-level for a specific chain and then moves to the next Z-level of the same chain. When machining of all the Z-levels of a specific chain is completed, the tool moves to the next chain. When the Complete Z-Level check box is selected and the Clear offset strategy is used with the Zigzag option, SolidCAM enables you to generate the following tool path: the first chain at the upper cutting level is machined in a zigzag cutting pass, and then the next chain at the same level is machined in a zigzag movement. When all the chains of the cutting level are machined, the tool moves to the next cutting level, and so forth.
1 2 3 4 5 6 7 8 9 10 11 12
1 3 2
322
6. 2.5D Milling
When the Complete Z-Level check box is selected and the Clear offset strategy is used with the One way option, the Sort by chains check box is available. The tool path order depends on the state of this check box. When the Sort by chains check box is not selected, SolidCAM enables you to generate the following tool path: the first chain of the first cutting level is machined in several equidistant profiles generated by the Clear offset strategy. When the machining of the chain is finished at the current cutting level, the next chain at the same cutting level is machined. When all the chains of this cutting level are machined, the tool descends to the next cutting level, and so forth.
3 9 15
2 8
1 7 4 5 6
14
13
10
11
12
18 16 17
When the Sort by chains check box is selected, SolidCAM enables you to generate the following tool path: the first chain of the first cutting level is machined in several equidistant profiles generated by the Clear offset strategy. When the machining of the chain is finished at the current cutting level, SolidCAM performs the machining of the same chain at the next cutting level. When the chain is completely machined at all cutting levels, the next chain is machined in the similar manner.
1 10 11 12
4 9
5 8
6 7
13
14
15
18 16 17
323
When the Complete Z-Level check box is not selected and the Clear offset strategy is used with the Zigzag option, SolidCAM enables you to generate the following tool path: the first chain of the first cutting level is machined in a zigzag cutting pass, then the tool moves down to the next cutting level. When machining of the current chain is completed at all cutting levels, the next chain is machined in the similar manner.
1 2 3 4 5 6
When the Complete Z-Level check box is not selected and the Clear offset strategy is used with the One way option, SolidCAM enables you to generate the following tool path: the first clear offset cut (farthest from the geometry chain) is machined at the upper cutting level for the first chain. Then the tool descends to the next cutting level and performs the first clear offset cut, and so forth. When the clear offset cut is finished at all Z-levels, the machining of the successive clear offset cuts (closer to the geometry chain) starts from the upper cutting level. When machining of all clear offset cuts is finished for the current chain, the next chain is machined in the similar manner.
7 8 9
4 5 6
1 2 3 10 13 16 17
11
14
18 12 15
324
6. 2.5D Milling
Finish machining When the Finish check box is selected, the Complete Z-level option is available if the Clear offset strategy is not used. When the Complete Z-Level check box is selected, the finishing is performed by Z-levels: machining of all chains at a specific Z-level is performed; when machining of this level is completed, the tool moves down to the next level, and so forth.
1 3 5 7 9 11 12 2 4 6 8 10
When the Complete Z-Level check box is not selected, the finishing is performed by chains: the tool completes machining of a specific Z-level for a specific chain and then moves to the next Z-level of the same chain. When machining of all the Z-levels of a specific chain is completed, the tool moves to the next chain.
1 2 3 4 5 6 7 8 9 10 11 12
325
This page enables you to define the parameters of tool approach and retreat relative to the machined profile. Ramping This section determines how the tool approaches the start point of the contour. Choose one of the following descent types from the list: Rapid generates a rapid descent (G0) from the Clearance level to the approach plane. Use this option when you know that there is no material in the descent path. Feed causes the tool to move rapidly to the Upper level minus the Safety distance. Then the tool descends to the approach plane with the given Z Feed rate. Use this option when you know that there is material in the descent path. Diagonal can be activated only if the Step down is equal to the Profile depth. It causes the tool to move rapidly from the Clearance level to the Upper level plus the Safety distance. Then the tool diagonally descends to the start of the profile geometry at the normal feed rate. The angle of the diagonal is automatically generated depending on the type of approach you choose.
Pre-drilling geometry generation
When the operation is defined and saved, SolidCAM automatically generates the pre-drilling geometry. This geometry contains the points into which the ramping is performed.
326
6. 2.5D Milling
The pre-drilling geometry can be generated only in the following cases: The Normal/Arc/Tangent/Point strategy is used for the Lead in (when the None option is used, the pre-drilling geometry is not generated); The Clear offset option is not used; The One way option is used for Depth cutting type; The Helical mode is not used for Depth type; The Wall draft angle option is not used; The Rest Material/Chamfer options are not used; The Plunging option is not used. During the generation of the pre-drilling geometry, SolidCAM automatically collects the ramping points of the roughing tool path for all of the chains. For each chain, SolidCAM collects all the ramping points where the vertical penetration into the material is performed. These points are located in the start point of the Lead in movement. Generally, for an open chain, SolidCAM has to generate only one ramping point.
Ramping position
Lead in
327
In some cases, during the tool path generation for closed chains, the chain is machined in a number of closed cutting passes. In such cases, SolidCAM generates more than one ramping position for one chain, and the number of positions depends on a number of cutting passes. For each cutting pass, one point is generated at the location where the vertical penetration into the material is performed.
Lead in
Lead in
Ramping position
The ramping positions are collected only for the rough cutting passes; the finish cutting passes are ignored. The name of the generated geometry is composed of the name of the initial Profile operation with the Drill_For_ prefix: Drill_For_ ProfileName, where the ProfileName is the name of the initial Profile operation. For example, for the Profile operation F_contour_T1, the pre-drilling geometry Drill_For_F_contour_T1 will be generated. The pre-drilling geometry appears under the Geometry header in SolidCAM Manager. This geometry is available for Drilling operations only. The pre-drilling geometry cannot be chosen in 3D Drilling operations.
328
6. 2.5D Milling
Adjacent passes connection This option enables you to define the connection method for adjacent cutting passes generated using the Clear offset method with the Zigzag option. The following options are available to define the passes connection: Linear With this option, the tool movement from one cutting pass to the next is performed as a straight line connecting the end point of the first pass with the start point of the next pass.
Rounded With this option, the tool movement from one cutting pass to the next is performed as an arc tangential to the adjacent cuttings passes. The arc connects the end point of the first pass to the start point of the next pass.
329
Lead in/Lead out These options enable you to control the way the tool approaches the profile and retreats away. None The tool approaches the milling level and retreats away exactly adjacent to the start point of the profile. Normal The tool approaches the profile and retreats away from/ to a point normal to the profile. The length of the normal can be set in the Value field.
Lead in value
Arc The tool approaches the profile and retreats away with a tangential arc. The arc radius can be set in the Value field. The Data button is displayed and enables you to define additional parameters in the Arc Lead in Data/Arc Lead out Data dialog box.
Lead in value
Arc angle
This parameter defines the angle of the Lead in arc segment. The default angle value is 90; in this case, SolidCAM generates a Lead in path of quarter arc.
Angle
Distance
330
6. 2.5D Milling
Lead in from
With the Arc Lead in option, the tool moves normal to the lead in arc at the arc start point. The following options are available:
Distance
The tool starts milling at the specified distance from the arc start point.
Center
When this check box is not selected, the tool rapidly moves from the Clearance level to the Safety distance, enters the material in the center of the defined approach arc and performs the arc movement to the geometry start point at the first cutting level. When this check box is selected, the tool rapidly moves from the Clearance level to the Safety distance, enters the material in the center of the profile geometry and performs a linear movement to the geometry start point at the first cutting level.
Approach movement
Tool path
The retreat is performed in the same manner. Tangent The tool approaches the profile and retreats away on a line tangent to the profile. The length of the tangent line can be set in the Value field.
Lead in value Normal
331
Point The tool approaches the profile and retreats away from/to a user-defined position. From this position the tool performs a linear movement to the start point of the profile. When you choose this option, the Pick button is activated and you can select a position on the CAD model.
Same as Lead in
When this check box is selected, the strategy and parameters defined for Lead in are used for Lead out. When the Zigzag option is used, the lead in/out movements for all the cuts are calculated according to the direction of the first cutting pass, irrespective of the direction of the other cutting passes. During the tool path linking, SolidCAM connects the cuts that contain lead in and lead out movements in a zigzag manner and changes the direction of all even cuts to the opposite. Therefore only for odd cuts, the Lead in strategy is used for approaching and the Lead out strategy is used for retreating. For even cuts, the Lead in strategy is used for retreating and the Lead out strategy is used for approaching.
Movements dened by Lead in strategy
332
6. 2.5D Milling
Keep tool down This option enables you to reduce the unnecessary tool movements through the Clearance level. When the Keep tool down check box is not selected, after the machining of the specific Z-level, the tool retracts up to the Operation Clearance level. At this level the tool horizontally moves to the start position of the next cut and then descends to the next Z-level.
Clearance level
When the Keep tool down check box is selected, after the machining of the specific Z-level, the tool retracts up to the height equal to the Safety distance from the machined cut, then horizontally moves to the start position of the next cut at this level and descends to the next Z-level.
Safety distance
333
334
6. 2.5D Milling
The geometry for Face Milling operations is defined using the Face Milling Geometry dialog box.
335
Name This edit box enables you to define the geometry name. Base Geometry This section enables you to choose the method of the Face Milling geometry definition.
Model
This option generates a rectangle located at the XY-plane and surrounding the Target model and selects it for the Face Milling geometry. The rectangle chain is displayed in the Chain List section.
Face Milling geometry
Faces
This option enables you to define the Face Milling geometry by face selection. The Define button and related combo-box enable you either to define a new faces geometry with the Select Faces dialog box or to choose an already defined geometry from the list. When the model faces are selected, SolidCAM generates a number of chains surrounding the selected faces. These chains are displayed in the Chain List section.
Selected faces
336
6. 2.5D Milling
Profile
This option enables you to define the Face Milling geometry by selecting a chain. The Define button and related combo-box enable you either to define a new profile geometry with the Geometry Edit dialog box or to choose an already defined geometry from the list. The defined chains are displayed in the Chain List section.
Face Milling geometry
Chain List This section displays all the chains chosen for the Face Milling geometry. Each chain entry in the list contains a check box. By clearing this check box, you can exclude the corresponding chain from the defined geometry. The right-click menu is available on the chain entries in the list. The Check All command selects all of the chain check boxes; all the geometry chains will participate in the current geometry. The Uncheck All command removes the selection from all of the chain check boxes; all the geometry chains will be excluded from the current geometry. When the selection is removed from all of the chains in the list, the that confirms the Face Milling Geometry dialog box is disabled. button
The Invert Check Status command enables you to invert the selection status for all the chain entries; all the selected check boxes will be unselected and vice versa, all the unselected check boxes will be selected.
337
The Merge button enables you to merge all the Face Milling geometry chains into a single chain. The Separate button enables you to divide a merged chain into its initial separate chains.
Separate chains
Merged chain
Modify This section enables you to offset the chain currently selected in the Chain List section. The Apply to all button enables you to apply the specified offset value to all the chains.
Offset
338
6. 2.5D Milling
Hatch technology The machining is performed in a linear pattern. The Overlap/Min. Overlap section enables you define the tool overlapping between two successive passes. This section is available only for Hatch and Contour strategies.
Equal step over
This option enables you to generate the hatch tool path spaced evenly with the automatically calculated Overlap value, which is nearest to the specified Min. Overlap value but not smaller than this value. When this check box is not selected, the distance between the last pass and the one before it can be smaller than that between all of the other passes.
Overlap
Overlap
When this check box is selected, the evenly spaced hatch tool path is generated. The overlap between two successive passes is not smaller than the specified Min. Overlap value. This option is available only for the Hatch strategy.
Overlap
Overlap
339
The Data button displays the Hatch Data dialog box that enables you to define the parameters of hatching.
Hatch angle The following options to define the angle of hatching are available:
Automatic optional angle
SolidCAM automatically calculates the optimal angle of hatching to expedite the machining. The tool path always follows the length of the face no matter what angle the machined surface is facing.
340
6. 2.5D Milling
You can change the angle by entering a different value in the Delta from optimal box.
Delta angle
Optimal direction
User-defined angle
This option enables you to determine the angle of the tool path.
Angle X
Keep cutting direction This option enables you to control the cutting direction when moving around model contours.
Yes: the
No: a shorter, optimized tool path is generated by reversing some tool movements.
The milling direction may change between climb and conventional milling.
341
Cutting direction
One way
This option enables you to create the tool path with only one-directional movements.
Zigzag
One way
This option enables you to create the tool path with bidirectional movements.
Extension
Zigzag
During face milling, the tool path is extended over the edges of the machined face. The Extension section enables you to define the extension both along the tool path (the Along section) and across the tool path (the Across section). The extension can be defined either by percentage of the tool diameter (the % of tool diameter option) or by value (the Value option).
Extension across the tool path Extension along the tool path
Corner
None
The tool path is formed with sharp corners between one direction and the next.
Fillet
This option connects each direction with a given radius allowing for a smoother transition between path directions.
342
6. 2.5D Milling
Contour technology The machining is performed in a number of equidistant contours. The Data button displays the Contour Parameters dialog box.
Start from
Inside
This option enables you to work in a pocket area starting from the middle of the pocket and cutting towards the outside border of the pocket.
Outside
This option enables you to work in a pocket area starting from the outside border of the pocket and cutting towards the middle of the pocket. Corner
None
The tool path is formed with sharp corners between one direction and the next.
343
Fillet
This option connects each direction with a given radius allowing for a smoother transition between path directions. The Min. corner radius parameter enables you to define the minimal value of the corner radius.
If the given radius is too large for a specific corner, it produces the largest possible radius at that point. There are times were the fillet option might leave some material. This is particularly true if the given radius is large.
Loop
This option ensures that the connecting points on the path are cleaned using a smooth transition. The tool path forms a loop in the corner, preventing an abrupt change of direction.
Sharp
This option ensures that using a short and simple movement cleans the connecting points on the path. Although this produces a sharp movement by the tool, the path itself is slightly shorter than that in the smooth corner option. This can help cut down on machining time. This option is not recommended for highspeed cutting. Direction This option enables you to choose climb or conventional milling for the roughing operation.
Climb Milling
Conventional Milling
344
6. 2.5D Milling
Arc approximation This command enables you to create G2/G3 GCode output from Contour roughing operations. SolidCAM checks whether successive points of the calculated tool path can be connected using an arc or a circle. If arc or circle connection within the specified arc approximation tolerance can be made, you receive arc and circle interpolation commands G2 and G3 in the generated GCode. This feature can drastically reduce the number of lines in GCode files. Most CNCcontrollers and machines work much faster on arcs and circles than on single tool path points or splines. Arc approximation increases actual feed rates on older CNCmachines and the machines work smoother. The Tolerance value defines the tolerance SolidCAM uses to position tool path points on arcs or circles. Adjacent tool paths connection This option enables you to choose the method with which the tool moves from one tool path to the next.
Linear
The tool moves in a normal approach from one tool path to the next.
Rounded
The tool moves in an arc path from one tool path to the next. The size of the arc is half the distance between tool paths. Extension The Contour tool path can also be extended over the machined face edges. The Extension section enables you to define the uniform extension of the tool path. The extension can be defined either by percentage of the tool diameter (the % of tool diameter option) or by value (the Value option).
Extension
345
One pass technology SolidCAM performs the face milling in one pass. The direction and the location of the pass are calculated automatically according to the face geometry, in order to generate an optimal tool movement with the tool covering the whole geometry. The Data button displays the One pass data dialog box that enables you to define the machining parameters.
The Extension section enables you to define the tool path extension over the face edges. The extension can be defined either by percentage of the tool diameter (the % of tool diameter option) or by value (the Value option). Offsets
Extension
This section enables you to define the offset that remains on the face floor after the roughing operation (Floor offset). The Finish check box enables you to remove the remaining offset with the last cut (if the check box is selected) or leave the offset unmachined for further operations (if the check box is not selected). Depth cutting type This option enables you to connect cutting passes by vertical zigzag movements. When a cutting pass is machined, the tool moves down to the next cutting level and machines it in the opposite direction. When the machining of all cutting levels is finished for a specific pass, the tool moves to the next cutting pass and machines it in the same manner. This option is available only for the Hatch and One Pass strategies.
346
6. 2.5D Milling
The behavior of these options depends on the state of the Cutting direction option defined in the Hatch Data dialog box. When the Zigzag option is chosen for Cutting direction and the One way option is chosen for Depth cutting type, the tool performs the machining of a cutting pass at a specific Z-level and then moves to the beginning of the next cutting pass located at the successive Z-level and continues the machining in the same direction. The movement to the next cutting pass is performed via the Clearance level. When the Zigzag option is chosen for Cutting direction and the Zigzag option is chosen for Depth cutting type, the tool performs the machining of a cutting pass at a specific Z-level, then moves directly to the next Z-level and then continues to machine the next cutting pass in the reversed direction.
When the One way option is chosen for Cutting direction and the One way option is chosen for Depth cutting type, the tool machines a cutting pass located at a specific Z-level and then rapidly moves via the Clearance level to the beginning of the next cutting pass at the same Z-level. When the Z-level is machined in such manner, the tool starts the machining of the next Z-level. In this case, SolidCAM preserves the cutting direction (either climb or conventional) for all of the cutting passes. When the One way option is chosen for Cutting direction and the Zigzag option is chosen for Depth cutting type, the tool performs the machining of all cutting passes at a specific Z-level in the same direction, and then directly moves down to machine the passes at the next Z-level in the opposite direction.
5 4 3 2 1 6 7 8 9 10
5 4 3 2 1
6 7 8 9 10
347
Reverse tool path The Reverse check box enables you to reverse direction of the tool path. When this check box is selected, the hatch tool path is performed in the opposite direction.
This option is available only for the Hatch and One Pass strategies. Sort cut order The Complete Z-level option enables you to define the order of the machining Z-levels, in case more than one face is machined. For more information, see topic 6.4.3.
348
6. 2.5D Milling
This page enables you to define the parameters of tool approach and retreat relative to the machined geometry. Ramping This field controls the way the tool plunges into the material inside the pocket. For more information, see topic 6.4.4. Lead in This field controls the movement of the tool when it enters the pocket on the finishing cut. For more information, see topic 6.4.4. Lead out This field controls the movement of the tool when it leaves the pocket on the finishing cut. For more information, see topic 6.4.4. Keep tool down This option enables you to reduce the unnecessary tool movements through the Clearance level. Foe more information, see topic 6.1.3.
349
350
6. 2.5D Milling
This page enables you to define the technological parameters of the machining. Modify The Tool side option enables you to define the tool position relative to the geometry.
Left Right Center
Right: the tool cuts to the right of the profile geometry at the distance defined by the values set in the Modify offset section of the Modify Geometry dialog box. Left: the tool cuts to the left of the profile geometry at the distance defined by the values set in Modify offset section of the Modify Geometry dialog box. Center: the center of the tool moves on the profile geometry. The compensation cannot be used with this option. When the Tool side is set to Right or Left, all chains defined for the Contour 3D operation geometry must start at the same height.
351
The Geometry button enables you to modify a geometry shared by several operations separately for each operation. When the Compensation check box is selected, the tool radius compensation options G4x of the CNC-controller are used in the GCode. For more information, see topic 6.1.2. Tool reference This option enables you to define the point on the tool which is in contact with the machined 3D contour. Tip With this option, the tool tip is in contact with the 3D contour; SolidCAM prevents the gouging between the tool and the 3D contour. Note that the tool axis always crosses the geometry.
Center With this option, the tool center is in contact with the 3D contour. In this case, SolidCAM does not check the gouging between the tool and the contour.
352
6. 2.5D Milling
Technology When the Tip option is chosen for the Tool reference definition, this section enables you to define the technological parameters of the operation. Type This option enables you to perform the semi-finish and/or finish machining of the 3D contour.
Semi-finish
The machining of the 3D contour is performed in several steps along the Z-axis. The vertical distance between two steps is defined by the Step down parameter.
Finish
This option is used to machine the 3D contour first with a semi-finish cut and then with a finish cut. Step down This value defines the vertical distance between two successive steps during the Semifinish machining of the 3D contour.
From Upper level
SolidCAM performs a number of horizontal semi-finish passes at each down step, from the Upper level up to the defined Contour depth.
Upper level 3D Contour geometry Contour depth
353
From surface
SolidCAM performs a number of 3D semi-finish passes at each step down, from the chosen 3D contour to the defined Contour depth.
3D Contour geometry
Contour depth
The Technology section is not available when the Center option is chosen for the Tool reference definition. Offsets SolidCAM enables you to specify the machining allowances that can be removed either by profile finishing in the same operation or in another operation. For more information, see topic 6.1.2. Rough This section enables you to perform the profile rough machining. For more information, see topic 6.1.2. Finish This section enables you to perform the profile finishing. For more information, see topic 6.1.2. Clear offset This section enables you to define the parameters of the Clear offset machining for the roughing and finishing passes. For more information, see topic 6.1.2.
354
6. 2.5D Milling
Chamfer This option enables you to machine chamfers with a Center drill tool. This button is available only when the Right or Left option is chosen for the Tool side definition. For more information, see topic 6.1.2.
When the Center option is chosen for the Tool side definition, the following Lead in/out options are available:
None Arc Tangent
For more information about Lead in/out options, see topic 6.1.3.
355
356
6. 2.5D Milling
357
The geometry definition is performed using the Geometry Edit dialog box. Only closed contours are acceptable for the definition of geometry. When you confirm an open chain definition in the Geometry Edit dialog box with the button, the Close Chain dialog box is displayed.
When you confirm this dialog box with the OK button, the chain is closed with a line that connects the start and the end points of the chain. The Mark line as open edge check box enables you to mark the connecting line as open edge to perform open pocket machining. When you click on the Cancel button, SolidCAM returns to the geometry definition and enables you to close the chain manually by the model element selection.
358
6. 2.5D Milling
Step down SolidCAM uses the constant-Z passes for the Pocket generation. The Step down parameter enables you to define the distance between each two successive Z-levels. Enter the tools cutting depth. Equal step down Selecting this check box enables you to keep an equal distance between all Z-levels. When this check box is selected, the Max. Step down parameter appears instead of the Step down parameter. For more information, see topic 6.1.2.
Step down Upper level
Pocket depth
359
Choose the pocket machining technology from the list. Hatch mills the pocket in a linear pattern. Contour machines the pocket in a round pattern. Hatch+Finish mills the pocket in a linear pattern and cleans up the profile on each cutting depth. Plunging pattern: the tool moves up and down in a drilling motion, travelling inside the pocket. Click on the Data button to define additional parameters.
360
6. 2.5D Milling
Hatch technology This technology enables you to machine the pocket in a linear pattern. This option is used in Pocket, Pocket Recognition and 3D Milling operations for Roughing (see topic 7.1.3) and Constant Z finishing (see topic 7.1.13). This technology creates a linear raster tool path up to the pocket contour.
Click on the Data button. The Hatch Data dialog box is displayed.
361
Hatch angle The following options to define the angle of hatching are available:
Automatic optional angle
SolidCAM automatically calculates the optimal angle of hatching to expedite the machining. The tool path always follows the length of the pocket no matter what angle the pocket is facing. You can change the angle by entering a different value in the Delta from optimal box.
User-defined angle
This option enables you to determine the angle of the tool path.
Keep cutting direction This option enables you to control the cutting direction when moving around model contours.
Yes
SolidCAM generates a shorter, optimized tool path by reversing some tool movements. The milling direction may change between climb and conventional milling.
362
6. 2.5D Milling
Cutting direction
One way
This option enables you to create the tool path with only onedirectional movements.
Zigzag
One way
This option enables you to create the tool path with bidirectional movements.
Zigzag
Corner
None
The tool path is formed with sharp corners between one direction and the next.
Fillet
This option connects each direction with a given radius allowing for a smoother transition between path directions.
Exit Material This option controls the tool movements between the working areas. When this check box is not selected, the tool moves from one working area to the next through the full material around the island to get to the next working area as shown above. When this check box is selected, the tool exits from the material and travels rapidly above the material to the next working area as shown above. The Lead in path is the Lead in you defined. This option is used in the Hatch and Contour strategies in Pocket, Pocket Recognition and 3D Milling operations.
363
Contour technology In this technology, the tool moves on offsets parallel to the pocket contour. Click on the Data button. The Contour Parameters dialog box is displayed. This option is used in the Pocket, Face Milling, Pocket Recognition and 3D for Roughing and Constant Z finishing.
Milling operations
Pocket Milling
Face Milling
3D Roughing
Constant Z Finishing
Exit material This option controls the tool movements between the working areas. Connect islands This option enables you to keep the same cutting direction (conventional or climb milling) throughout the entire tool path where possible. This is particularly important in highspeed cutting.
364
6. 2.5D Milling
Start from
Inside
This option enables you to work in a pocket area starting from the middle of the pocket and cutting towards the outside border of the pocket.
Outside
This option enables you to work in a pocket area starting from the outside border of the pocket and cutting towards the middle of the pocket. Corner
None
The tool path is formed with sharp corners between one direction and the next.
Fillet
This option connects each direction with a given radius allowing for a smoother transition between path directions. The Min. corner radius parameter enables you to define the minimal value of the corner radius. If the given radius is too large for a specific corner, it produces the largest possible radius at that point. Some material can be left if the given radius is large.
Loop
This option ensures that the connecting points on the path are cleaned using a smooth transition. The tool path forms a loop in the corner, preventing an abrupt change of direction.
365
Sharp
This option ensures that using a short and simple movement cleans the connecting points on the path. Although this produces a sharp movement by the tool, the path itself is slightly shorter than that in the Loop option. This can help reduce the machining time. This option is not recommended for high-speed cutting. Direction This option enables you to choose climb or conventional milling for the roughing operation.
Climb Milling
Conventional Milling
Arc approximation This command enables you to create G2/G3 GCode output from Contour roughing operations. SolidCAM checks whether successive points of the calculated tool path can be connected using an arc or a circle. If arc or circle connection within the specified arc approximation tolerance can be made, you receive arc and circle interpolation commands G2 and G3 in the generated GCode. This feature can drastically reduce the number of lines in GCode files. Most CNCcontrollers and machines work much faster on arcs and circles than on single tool path points or splines. Arc approximation increases actual feed rates on older CNCmachines and the machines work smoother. The Tolerance value defines the tolerance SolidCAM uses to position tool path points on arcs or circles.
366
6. 2.5D Milling
Adjacent passes connection This option enables you to choose the method with which the tool moves within the pocket from one pass to the next.
Linear
The tool moves in a normal approach from one pass to the next.
Rounded
The tool moves in an arc path from one pass to the next. The size of the arc is half the distance between passes.
Hatch+Finish technology SolidCAM first machines the pocket on the actual step down with the Hatch technology and then makes a final path around the pocket contour. Click on the Data button. The Hatch Data dialog box is displayed.
Hatching
Final proling
367
removing material from a given pocket using a special tool. Instead of milling the material, the tool moves up and down as in a drilling motion, travelling along the path type you choose. Click on the Data button. The Plunging dialog box is displayed. Drill cycle type SolidCAM enables you to choose preferable drilling cycles for the plunging operation. 1. Click on the Drill cycle type button and choose the cycle type you want in the Drill cycle dialog box. 2. Click on the Data button and specify the parameters in the Drill options dialog box. For more information on the Drilling cycles, see topic 6.6.3. Clean condition This value determines the maximum percentage of material that will be removed based on the diameter of the tool. Minimal clean condition This value determines the minimum percentage of material that will be removed based on the diameter of the tool.
368
6. 2.5D Milling
Feeds The plunging feeds can be determined by the percentage of the tool and the diameter of the tool being used.
Full/Center
If the full diameter of the tool is cutting, the feed and spin defined in the appropriate field are used. In the second field, you can determine a specific working diameter of the tool. If the working diameter from the center of the tool is greater than this value but smaller than the full diameter, the feed and spin rate that was entered in the appropriate field are used.
Overlap (%)
If none of the above conditions have been met, the feed and spin are determined by the overlap of the tool. Open pocket machining This section is enabled only when the pocket geometry contains open edges. Extension During the open pocket machining, the tool path is extended beyond the open edges. The Extension section enables you to define the overlapping between the tool and the open edges; the overlapping can be defined as a percentage of the tool diameter (the % of tool diameter option) or as a value (the Value option).
Open edge
Extension
369
Use profile strategy The Use profile strategy option enables you to perform the open pocket machining in a Profile manner. The tool path at a specific Z-level consists of several equidistant profiles starting from outside the model at the distance defined by the Extension parameter. The tool moves on offsets parallel to the pocket geometry. The following options enable you to define the tool path direction and linking. When the One way option is chosen, the tool finishes one profile pass, then rapidly moves (G0) to the safety distance and then to the start of the next cutting pass. The cutting direction (either climb or conventional) is preserved for each cutting pass.
When the Zigzag option is chosen, the tool finishes one profile pass and then moves directly to the next pass. The machining is performed without leaving the material, thus constantly switching between climb and conventional milling.
Approach from outside This option enables the tool to approach from outside of the material in the open pocket areas, if possible. Such approach enables you to decrease the tool loading when plunging into the material. This option enables you to perform the approach movement from the automatically calculated point outside of the material. The tool moves to the required depth outside of the material and then plunges into the material.
370
6. 2.5D Milling
Descend to cutting level with Rapid This option enables you to avoid vertical non-machining movements outside of the material performed with the working feed by direct rapid movement down to the cutting level. When this check box is selected, the tool descends from the Clearance level outside of the material directly to the cutting level (defined with the Step down parameter) using the Rapid feed. Then the horizontal movement into the material is started with the working feed.
Upper level
Rapid movement
Cutting level
When this check box is not selected, the tool descends from the Clearance level down to the Safety distance with the Rapid feed. From the Safety distance, the tool descends down to the cutting level (defined with the Step down parameter) with the defined feed and starts the horizontal cutting movements into the material with the working feed.
Cutting level
The Descend to cutting level with Rapid check box is available only when the Approach from outside check box is selected.
371
Complete Z-level This option enables you to define the order of Z-levels machining when several pockets are machined in a single Pocket operation.
1 5 6 7 8
When the Complete Z-level check box is not selected, SolidCAM machines all the Z-levels of the first pocket and then starts the machining of the next pocket. When the Complete Z-level check box is selected, the machining is performed by the Z-levels; SolidCAM removes material at a specific Z-level in all pockets and then moves to the next Z-level. Overlap
2 3 4
1 3 5 7
2 4 6 8
Enter the Overlap of adjacent tool paths in the milling of the pocket. For example, with the tool diameter of 10 mm, the side step is 3.5 mm for the next tool movement.
This option enables you to generate the hatch tool path spaced evenly with the automatically calculated Overlap value, which is nearest to the specified Min. Overlap value but not smaller than this value. When this check box is not selected, the distance between the last pass and the one before it can be smaller than that between all of the other passes.
Overlap
Overlap
372
6. 2.5D Milling
When this check box is selected, the evenly spaced hatch tool path is generated. The overlap between two successive passes is not smaller than the specified Min. Overlap value.
Overlap
Overlap
Fillet size for last cut This option enables you to add a radius to a sharp corner without changing the geometry. For more information on this option, see topic 6.1.2. Offsets To perform the rough machining of the pocket, you have to specify the offsets on the pocket geometry that will be removed with the finishing cut.
Wall offset
Enter the offset that will remain on the pocket wall after the roughing cut.
Island offset
Enter the offset that will remain on the pocket islands after the roughing cut.
Floor offset
Enter the offset that will remain on the pocket floor after the roughing cut.
373
Finish This section enables you to perform the finish machining of the pocket. The Wall check box enables you to perform finishing of the pocket walls. Only walls and islands are finished on the contour. The pocket depth is reduced by the specified floor offset. The Floor check box enables you to perform finishing of the pocket floor. The finish cut is executed to remove the floor offset. The specified wall and island offset remain on the pocket contour. Wall finish This section field contains two options to control the material removal on the last finishing cut.
On offset
The finish path is executed at an offset equal to the sum of the tool radius and the finish offset from the tool path of the last roughing cut. The result is a uniform cutting depth (side step) on the last cut, since in the pocket corners the tool is not drawn into the material.
Offset Offset
Offset
On geometry
R R Offset
Offset
374
6. 2.5D Milling
Depth This section enables you to choose how the wall finishing will be performed: at the whole depth or in a number of steps at each step down.
Total depth
Finish passes
When this option is chosen, the wall finishing is performed in a single cut at the whole depth.
Finish pass
When this option is chosen, the wall finishing is performed in a number of successive cuts at each step down.
The options of the Depth section are available only when the wall finishing is performed in the operation. When the Wall draft angle option is used in the operation, the Depth options are disabled and the wall finishing is performed in a number of successive cuts at each step down. Compensation When the Compensation check box is selected, the tool radius compensation options G4x of the CNC-controller are used in the GCode. For more information on this option, see topic 6.1.2.
375
Rest Material/Chamfer The Rest material option enables you to define parameters to remove the rest material left unmachined after the previous operations. The Chamfer option enables you to machine chamfers with the Center drill tool. Rest material When a large tool is used around the profile in Pocket machining, the tool Pocket leaves material in the areas that it cannot geometry enter. The rest material option enables you to remove the material from this area without defining a new geometry. The Rest Material dialog box is displayed.
Rest Material areas
Island geometry
In this dialog box, you have to define the following parameters: Previous tool diameter the diameter of the tool used in the previous operation. Previous wall offset the wall offset used in the previous operation. Extension the overlap distance that you would like to start and end from the previous larger end mill.
Extension
Rest Material
376
6. 2.5D Milling
Milling type
When the Separate areas strategy is chosen, SolidCAM generates a profile or pocket tool path to clean areas that the previous tool could not mill. The Around profile strategy generates a closed profile to mill the rest material.
Separate areas
tool.
Around Profile
In Pocket operations with the Separate areas machining strategy, SolidCAM can generate two types of tool paths, depending on the volume of the rest material and on the previous and present tool diameters:
SolidCAM generates a pocket or a profile tool path in each area of the rest material.
377
Pocket-style tool path areas can be open or closed depending on the approach possibilities.
Closed pocket-style tool path area Open pocket-style tool path area
The approach to the open pockets can be performed from the machined space in contrast to the closed pockets where the approach from the outside is unavailable. The strategy for the tool approach to closed pocket areas is defined in the Ramping section (see topic 6.4.4) in the Pocket Operation dialog box. SolidCAM automatically determines the optimal point for the approach to the open pocket areas.
Approach point
When the Rest Material option is chosen in the Pocket Operation dialog box, the Lead in option provides you with the following strategies used for the approach to Profilestyle tool path areas: None Normal Arc Tangent For more information on the Lead in strategies, see topic 6.4.4.
378
6. 2.5D Milling
The check boxes selected in the Pocket and Profile boxes determine which of these tool paths are cut: Island only tool paths that touch the pocket islands are cut. Island + Wall tool paths that touch both the pocket wall and islands are cut. Wall only tool paths that touch the pocket wall are cut. Each tool down machining is performed in a number of successive cuts at each step down. Chamfer This option enables you to use a drill tool to add a chamfer to the edge of a part.
In the Tool page of the Pocket Operation dialog box, click on the Select button. The Part Tool Table dialog box is displayed. Choose a drill tool for the chamfering.
In the Levels page of the Pocket Operation dialog box, enter the size of the chamfer edge in the Pocket depth field.
379
In the Technology page of the Pocket Operation dialog box, choose Chamfer from the Rest Material\Chamfer list and click on the Data button. In the Chamfer dialog box, enter the following parameters:
Feed
the feed rate you would like the tool to travel. the starting cutting diameter of the tool.
Cutting diameter
Cutting diameter
If you choose to chamfer a part that has a sharp corner, it is important that the cutting diameter is equal to that of the last tool used in that geometry so that the chamfer is equal all around.
6 6
380
6. 2.5D Milling
This section displays the list of all geometry chains defined for the operation. All the chain entries are displayed under the Chains header. You can select chain entries in the list.
381
When the Chains header is selected, SolidCAM displays the tool paths and default ramping positions for all of the chains.
Default ramping position
When a specific chain is selected, SolidCAM displays the tool path and the default ramping position automatically calculated for this chain. You can change this position by picking a point on the model or by entering the new position coordinates into the X, Y, Z dialog box. To facilitate the definition, SolidCAM displays only the first Z-level of the tool path in the XY-plane of current Coordinate System. The automatically defined start position of the tool path is marked with a cyan dot in a circle of the tool diameter size. This circle is connected by two parallel lines with a second circle of the same diameter; the center of the second circle is linked to the cursor position. When the cursor moves over the model, the circle also moves causing the updating of the connecting lines. This schematic image simplifies the choice of the vertical ramping position by displaying the lines parallel to the cutting pass between the ramping position and the tool path start position. In this mode, you can pick the ramping position on the model.
Automatically calculated tool path start position Tool diameter circle
Cursor position
382
6. 2.5D Milling
When the position is picked, it is marked on the model with a cyan dot. The coordinates of the picked point are displayed in the X, Y, Z dialog box. The start position of the tool path is marked on the model with a yellow dot. When the ramping position is defined, the tool vertically descends into the material at the specified ramping position until it reaches the first cutting level; then it moves horizontally to the start position of the tool path and performs machining of the pocket.
Tool path start position Ramping position
When the ramping position for a chain is defined manually by model picking, the color of the chain entry in the list is changed to blue.
Ramping position
When a single chain is selected in the list, the Set default button enables you to replace the currently defined ramping position for the selected chain by the default ramping position located at the tool path start position. When the Chains header is selected, the Set default button enables you to remove the ramping positions for all the chains and re-assign for them the default ramping positions. The Auto next button provides you with the selection mode that enables you to define the ramping positions for all of the chains one by one. When a chain is selected and the Auto next button is clicked, SolidCAM enables you to define the ramping position for the current chain. When the ramping position is defined by picking on the model, SolidCAM automatically switches to the next chain in the list, and so on.
383
Angle The tool moves to the pocket start point at a specified ramp angle. The Data button displays the Angle ramping dialog box that enables you to define the ramping position and the related parameters.
The Angle edit box enables you to define the ramping angle.
Chains
This section displays the list of all geometry chains defined for the operation. All the chain entries are displayed under the Chains header. You can select chain entries in the list. When the Chains header is selected, SolidCAM displays the tool paths and default ramping positions automatically calculated for all of the chains. When a chain entry is selected, SolidCAM displays the tool path and the default ramping position automatically calculated for this chain; this position can be changed. The ramping position is selected in the same manner as for Vertical ramping.
384
6. 2.5D Milling
When the ramping position is defined, the tool moves to the pocket start point at a specified ramp angle. The inclined movement starts at the Safety distance level and continues to the start position of the tool path. If the inclination angle of the movement is equal to or smaller than the specified Angle value, the ramping movement is performed in one pass. If the inclination angle is greater than the specified Angle value, the ramping is performed in several zigzag passes. When the tool reaches the first cutting level at the tool path start position, the pocket machining is performed.
Distance Safety distance
Step down
Ramping position
The Set default button enables you to replace the currently defined ramping position for the selected chain by the default ramping position located at the tool path start position. The Auto next button provides you with the selection mode that enables you to define the ramping positions for all of the chains one by one. SolidCAM does not check the ramping movement against the pocket contour. Check the tool path simulation to make sure that the tool does not gouge the pocket walls or islands. Helical The tool enters the material in a spiral movement according to the defined step down, angle and radius.
385
The Data button displays the Helical ramping dialog box that enables you to define the ramping position and the related parameters.
Helical ramping parameters
The Tool step down parameter defines the distance between each two adjacent turns of the tool helical movement. The Angle parameter defines the ramping angle. The Radius parameter defines the radius of the descending helix.
Center cutting
If your tool has center cutting capabilities, select the Center cutting check box. In the Angle field, enter the descent angle that you would like the tool to follow. In the Radius field, enter the radius of the tool path helix. The working order is as follows: The tool descends from the safety distance above the Upper level to the material in a circular motion until the step down is reached using the user-defined radius. When the tool reaches the step down depth, it machines all the material at the step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Z safety distance above the previous step down depth and repeats the Helical Lead in to the next working depth. This process repeats itself until the final depth has been machined. If the tool does not have center cutting capabilities, do not select the Center cutting check box. In the Tool step down field, enter the depth of the step down of the tool. The result of this action is the same as with a center cutting tool except for the following differences: The tool descends from the safety distance above the Upper level to the material in a circular motion up to the Tool Step down. At this point, the tool clears a circular path. Then it descends to the next Tool step down.
386
6. 2.5D Milling
This is repeated until the tool reaches the CAM-Part step down depth. When the tool reaches the step down depth, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Z safety distance above the previous step down depth and repeat the Helical Lead in to the next working depth. This process repeats itself until the final depth has been machined.
Chains
This section displays the list of all geometry chains defined for the operation. All the chain entries are displayed under the Chains header. You can select chain entries in the list. When the Chains header is selected, SolidCAM displays the tool path and default ramping positions for all of the chains. The circles represent the default helical ramping movement defined for each chain. When a chain entry is selected, SolidCAM displays the tool path and the default ramping position for this chain. This position is automatically defined at the start position of the tool path segment relevant for the current chain. You can change this position by picking a point on the model or by entering the new position coordinates into the X, Y, Z dialog box. The schematic circle facilitates the definition of the position. When the position is picked, it is marked on the model with a cyan dot. The coordinates of the picked point are displayed in the X, Y, Z dialog box. The start position of the tool path is marked on the model with a yellow dot. The circle of the tool path color represents the helical movement of the tool plunging.
Tool path start position Ramping position
387
When the ramping position is defined, the tool descends into the material at the specified ramping position with helical movements according to the defined parameters. When it reaches the level of the first cutting pass, it moves to the start position of the tool path and performs machining of the pocket.
Ramping position
The Set default button enables you to replace the currently defined ramping position for the selected chain by the default ramping position located at the tool path start position. The Auto next button provides you with the selection mode that enables you to define the ramping positions for all of the chains one by one. Linear The Linear ramping follows the same rules as the Helical ramping. The difference is that the descent is performed in a linear zigzag manner rather than in a circular one. The Data button displays the Linear ramping dialog box that enables you to define the ramping position and the related parameters.
Linear ramping parameters
The Tool step down parameter defines the distance between each two adjacent turns of the tool helical movement. The Angle parameter defines the ramping angle. The Length parameter defines the length of the linear descending motion.
388
6. 2.5D Milling
Center cutting
Linear
If your tool has center cutting capabilities, select the Center cutting check box. In the dialog box, enter the length of the linear tool path that you would like the tool to travel. The working order is as follows:
The tool descends from the safety distance above the Upper Level to the material in a zigzag motion based on the user defined angle and length until the step down is reached. When the tool reaches the down depth step, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Z safety distance above the previous step down depth and repeat the Linear Lead in to the next working depth. This process repeats itself until the final depth has been machined. If the tool does not have center cutting capabilities, do not select the Center cutting check box. In the Tool step down field, enter the required depth of the step down. The result of this action is the same as that of the center cutting tool except for the following differences: The tool descends from the safety distance above the Upper Level to the material in a zigzag motion up to the Tool Step down. At this point the tool clears a straight linear path. Then it descends to the next Tool Step down. This is repeated until the tool reaches the CAM-Part step down depth. When the tool reaches the step down depth, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Z safety distance above the previous step down depth and repeat the Linear ramping to the next working depth. This process repeats itself until the final depth has been machined.
389
Chains
This section displays the list of all geometry chains defined for the operation. All the chain entries are displayed under the Chains header. You can select chain entries in the list. When the Chains header is selected, SolidCAM displays the tool paths and default ramping positions for all of the chains. When a chain entry is selected, SolidCAM displays the tool path and the default ramping position for this chain. This position is automatically defined at the start position of the tool path segment relevant for the current chain. You can change this position by picking a point on the model or by entering the new position coordinates into the X, Y, Z dialog box. The schematic circle facilitates the definition of the position. When the position is picked, it is marked on the model with a cyan dot. The coordinates of the picked point are displayed in the X, Y, Z dialog box. The start position of the tool path is marked on the model with a yellow dot. The line drawn through the picked ramping position represents the linear movement of the tool plunging. Another line drawn from the ramping position to the start position represent the tool horizontal movement at the first cutting level.
Tool path start position Ramping position
When the ramping position is defined, the tool descends into the material at the specified ramping position. The ramping movement is performed in a linear manner. When the tool reaches the first cutting level, it horizontally moves to the start position of the tool path and starts the pocket machining.
390
6. 2.5D Milling
Ramping position
The Set default button enables you to replace the currently defined ramping position for the selected chain by the default ramping position located at the tool path start position. The Auto next button provides you with the selection mode that enables you to define the ramping positions for all of the chains one by one. Lead in In pocket machining, the Lead in option is used for horizontal approach of the tool to the geometry in the machining of the part walls. This option is available when the Wall check box is selected in the Finish section of the Technology page. None The tool leads in to the milling level exactly adjacent to the start point of the geometry. Normal The tool leads in to the geometry from a point normal to the geometry. The length of the normal can be set in the Value field.
Lead in value
Arc The tool leads in to the profile with a tangential arc. The arc radius can be set in the Value field.
Lead in value
391
The Data button enables you to define additional parameters in the Arc Lead In Data dialog box.
Arc angle
This parameter defines the angle of the retreat arc segment. The default angle value is 90; in this case SolidCAM generates an approach path of quarter arc.
Lead in from
With the Arc Lead in option, the tool moves normal to the retreat arc at the arc start point. The following options are available:
Distance
The tool starts at the specified distance from the arc start point.
Center
Angle
Distance
Tangent The tool leads in on a line tangent to the profile. The length of the tangent can be set in the Value field.
Lead in value
Normal
392
6. 2.5D Milling
Lead out This field controls the movement of the tool when it exits from the pocket contour on the finishing cut. None On the last point of the contour, the tool exits vertically in rapid move. This option causes the tool to exit while in contact with the pocket wall, which might cause gouging and result in visible marks on the workpiece. Normal With a movement normal to the pocket contour, the tool retreats from the last point of the profile. The length of the normal must be specified using the Distance value. Then the tool rapidly travels vertically to the Clearance level.
Arc With a circular motion tangent to the last entity of the pocket contour, the tool retreats from the profile. The radius of the arc must be specified using the Distance value. Then the tool rapidly travels vertically to the Clearance level.
393
The Data button is displayed. Click on the button to display the Arc Lead Out Data dialog box.
Arc angle
This parameter defines the angle of the lead out arc segment. The default angle value is 90; in this case, SolidCAM generates a lead out path of quarter arc.
Lead out from
With the Arc Lead out option, the tool moves normal to the lead out arc at the arc start point. The following options are available:
Distance
The tool starts from the specified distance from the arc start point.
Center
Angle
Distance
Tangent The tool retreats from the pocket wall in a movement tangent to the last profile entity. The length of the tangent must be entered in the Distance field.
Normal
SolidCAM does not check the Lead out movements against the pocket contour. Check the tool path simulation to make sure that the tool does not gouge the pocket walls or islands.
394
6. 2.5D Milling
Same as Lead in
When this check box is selected, the strategy and parameters defined for Lead in are used for Lead out. Keep tool down This option enables you to reduce the unnecessary tool movements through the Clearance level. Foe more information, see topic 6.1.3.
395
396
6. 2.5D Milling
This page enables you to define the machining geometry for the operation. Defining the geometry The automatically recognized geometry consists of planar faces and loops of through pocket features. The definition of the geometry is performed in the Select Faces dialog box. The major steps of the Pocket Recognition geometry selection are: Choose the model configuration used for the recognition; Set the selection filter options for Through Pocket and Circular Pocket; Set the selection mode; Perform the pocket recognition and generate the faces tree; Choose the faces you want to include in the operation geometry.
397
Select Faces dialog box This dialog box enables you to define the parameters of the pocket feature recognition geometry.
Name
This option enables you to define the name of the geometry. SolidCAM offers you the Default Geometry name (see topic 12.9) that can be edited.
Configurations
This section enables you to select the SolidWorks model configuration to be used for the geometry definition.
Selection mode
This section enables you to set the mode of the geometry selection. The following selection modes are available:
Solid Body
This mode enables you to perform automatic recognition of the pocket features on the picked solid body. All planar faces are recognized with the surface normal vector oriented parallel to the Z-axis of the current CoordSys. The planar faces that cannot be machined with the current CoordSys position (undercuts) cannot be selected (the selection is rejected). All the through pocket areas are recognized according to the Through pocket option.
Z
Selected faces
398
6. 2.5D Milling
Face
This mode enables you to pick single planar faces. When a face is picked, SolidCAM checks the parallel relation between the surface normal vector of the picked face and the positive direction of the Z-axis of the current CoordSys. If they are not parallel, the face is not selected. The undercut faces that cannot be machined with the current CoordSys position are also not selected. The selection is working in the toggling mode: the first click on a face selects it, the next click on the selected face removes the selection.
Through Pocket Chain
This mode enables you to select the through pockets by picking one of the edges of the lower loop of the pocket area. When the edge is picked, the complete geometry of the through pocket is automatically selected. The lower loop is highlighted on the model. The selection is working in the toggling mode: the first click on an edge selects the loop, the next click on an edge of the already selected loop removes the selection.
Through Pocket
When this check box is selected with the Selection mode set to Solid body, the recognition of through pocket features is also performed.
Through pockets
Only the through pocket features where the upper loop is similar to the lower loop are recognized. The through pocket features that cannot be machined with the current CoordSys position cannot be selected.
Upper loop
Lower loop
399
When this check box is selected with the Selection mode set to Solid body, circular pocket features can be selected according to their diameter. All circular pocket features with the diameter greater than the specified Min. Diameter value will be selected. Using this option, you can avoid the machining of the drill features that are supposed to be machined in other operations (Drilling, Drill recognition, etc.). The Min. Diameter parameter defines the minimum diameter of the pocket features. You may enter the value in the edit box or pick a cylindrical surface or a circular edge in the solid model when the cursor is placed in the Min. Diameter edit box. When the Apply filter check box is not selected, all recognized circular pocket areas suitable for the current Coordinate System will be selected.
Model Appearance
The Transparency option enables you to display the selected solid bodies in the transparent mode.
List of recognized elements
This section displays the list of all recognized model elements included in the geometry for the operation. Each model element is accompanied by its Z-level value enclosed in parentheses. When an element is selected in the list, it is highlighted on the solid model. The right-click menu is available on the list items. The Unselect command enables you to remove the current item from the selected geometry. The Unselect All command enables you to remove the selection from all items in the list.
400
6. 2.5D Milling
When the Select Faces dialog box is confirmed, SolidCAM automatically generates a number of pocket contours to perform the optimal machining of the selected faces and through pockets. In the part shown below, the contours are generated from the selected planar faces. The machining is performed in the following sequence: first, the upper face is machined; then the pocket is machined up to the height of the central pad. From this height, the pocket with island is machined up to the final pocket depth.
Modifying the geometry After the geometry is defined, it can be shared between a number of Pocket Recognition operations. In each operation, SolidCAM enables you to perform a specific geometry modification. The modification is relevant only for the current operation and does not affect other operations based on this geometry. The Modify button displays the Geometry Modify dialog box that enables you to define the parameters of the geometry modification. Geometry Modify dialog box
Through pocket
This section enables you to modify the depth of the through pockets with the specified Delta value. When a positive value is applied, the through pockets will be deeper by the specified value.
Machine floor fillets
This option enables you to control the machining of fillets between the floor and the walls of the pocket features.
401
When this option is activated, SolidCAM generates a multi-level pocket geometry evenly distributed along the Z-axis. The machining of this geometry performs the rough machining of the fillets.
you to control the parameters of the multi-level geometry generation and provides you with the information about the Maximum Fillet Radius found in the geometry.
The Number of Steps button displays the Fillet Step Number dialog box. This dialog box enables
This dialog box enables you to specify the range of the fillet radii and assign a number of steps to each such range. SolidCAM generates a defined number of evenly distributed Z-levels. At each level, the closed contour is automatically generated.
Transparency
This section enables you to apply the transparency for the solid bodies used for the geometry definition.
Preview
This button enables you to display the modified geometry on the solid model. The Resume button enables you to return from the preview state to the dialog box.
List of geometry elements
This list displays the geometry elements included in the current geometry. Each element in the list is accompanied by the following information in parentheses: Z-level at which the element is located, radius of the adjacent fillet and diameter of circular pockets. The check box near each geometry elementenables you to exclude the current element from the geometry of the operation. When the check box is selected, the element is machined in the current operation.
402
6. 2.5D Milling
A right-click menu is available on the elements of the list. This menu enables you to perform the following actions:
Check all
This command enables you to check all the elements of the list.
Uncheck all
This command enables you to uncheck all the elements of the list.
Invert check states
With this command the state of the check boxes of all the elements will be reversed.
The Pocket depth is automatically recognized on the solid model, for each pocket feature separately.
403
Pocket machining technology Choose the pocket machining technology from the list.
Pocket machining technologies
Hatch Contour Hatch+Finish Plunging pattern
Contour machines the pocket in a round pattern. Hatch mills the pocket in a linear pattern. Hatch+Finish mills the pocket in a linear pattern and cleans up the profile on each cutting depth. Plunging pattern: the tool moves up and down in a drilling motion, travelling inside the pocket. For more information about rough machining strategies, see topic 6.4.3. Click on the Data button to define additional parameters.
404
6. 2.5D Milling
Open pockets machining This section is enabled only when the pocket geometry contains open edges.
Extension
During the open pocket machining, the tool path is extended beyond the open edges. The Extension section enables you to define the overlapping between the tool and the open edges; the overlapping can be defined as a percentage of the tool diameter (the % of tool diameter option) or as a value (the Value option).
Use profile strategy
Open edge
Extension
The Use profile strategy option enables you to perform the Open pocket machining in a Profile manner. The tool path at a specific Z-level consists of several equidistant profiles starting from outside the model at the distance defined by the Extension parameter. The tool moves on offsets parallel to the pocket geometry.
6.4.3.
This option enables the tool to approach from outside of the material in the open pocket areas, if possible. Such approach enables you to decrease the tool loading when plunging into the material. This option enables you to perform the approach movement from the automatically calculated point outside of the material. The tool moves to the required depth outside of the material and then plunges into the material.
405
This option enables you to avoid vertical non-machining movements outside of the material performed with the working feed by direct rapid movement down to the cutting level. For more information on this option, see topic 6.4.3.
Final cut
When this check box is selected, only the finish path for the floor area of the pockets is generated, rough machining is not performed. Since the Floor offset parameter is disabled, machining is performed only at the specified pocket depth.
Complete Z-level
This option enables you to define the order of the machining Z-levels. For more information on this option, see topic 6.4.3. Overlap Enter the Overlap of adjacent tool paths in the milling of the pocket.
For more information, see topic 6.4.3. Rest Material/Chamfer The Rest material option enables you to define parameters to remove the rest material left unmachined after the previous operations. The Chamfer option enables you to machine chamfers with the Center drill tool. For more information on these options, see topic 6.4.3.
406
6. 2.5D Milling
Offsets To perform the rough machining of the pocket, you have to specify the offsets on the pocket geometry that will be removed with the finishing cut.
Wall offset
Enter the offset that will remain on the pocket wall after the roughing cut.
Island offset
Enter the offset that will remain on the pocket islands after the roughing cut.
Floor offset
Enter the offset that will remain on the pocket floor after the roughing cut. Finish This section enables you to perform the finish machining of the pocket. The Wall check box enables you to perform finishing of the pocket walls. Only wall and islands are finished on the contour. The pocket depth is reduced by the specified floor offset. The Floor check box enables you to perform finishing of the pocket floor. The finish cut is executed to remove the floor offset. The specified wall and island offset remain on the pocket contour. For more information on this option, see topic 6.4.3. Compensation If the Compensation check box is selected, the tool radius compensation options G4x of the CNCcontroller are used in the GCode. For more information on this option, see topic 6.1.2. Fillet size for last cut This option enables you to add a radius to a sharp corner without changing the geometry. For more information on this option, see topic 6.1.2.
407
Ramping This field controls the way the tool plunges into the material inside the pocket. For more information about Ramping modes and the corresponding parameters, see topic 6.4.4. Lead in In pocket machining, the Lead in option is used for horizontal approach of the tool to the geometry in the machining of the part walls. This option is available when the Wall check box is selected in the Finish section of the Technology page. For more information, see topic 6.4.4. Lead out This field controls the movement of the tool when it exits from the pocket contour on the finishing cut. For more information, see topic 6.4.4.
408
6. 2.5D Milling
409
Center drill In addition to the standard tool parameters presented on the Tool page, SolidCAM enables you to label a tool as a center drill. This option is used for automatic sorting. In automatic sorting, tools labeled as center drills can be automatically moved to the top of the operation list. When a Tap tool is chosen for the operation, the Tapping drill cycle type is automatically chosen. The Drill cycle type button is unavailable. You cannot change the cycle type until the Tap tool is changed to a tool of a different type. If the Tapping cycle is not supported by the current MAC file, the Tap tool cannot be chosen for the operation. The following error message is displayed when you click on the Select button in the Part Tool Table dialog box.
When you change the MAC file for the CAM-Part that contains tapping operations with a MAC file that does not support tapping, SolidCAM marks all the tapping operations with the asterisk sign (the PCode is removed). When you try to calculate such operations, the following messages are displayed.
410
6. 2.5D Milling
Drill depth This parameter defines the final depth of the drilled hole.
Drill depth
411
Depth type This option enables you to deepen the drilled hole in order to obtain a given diameter at the specified drill depth.
Drill depth Drill depth Drill depth
Cutter tip
The drill reaches the defined Drill depth with the full diameter.
Diameter value
The drill reaches the defined Drill depth with the drill cone diameter specified by the Diameter value parameter. The Diameter value can vary from 0 all the way up to the drill tool diameter. A value greater than the drill tool diameter is automatically decreased to the drill tool diameter.
412
6. 2.5D Milling
Sequence of drill positions This section enables you to define the sequence of the drill positions, manage its direction, etc. You can change the order of positions in the sequence by dragging and dropping them in the list section of the Drill Geometry Selection dialog box (see topic 4.2.3). Default The drills are performed according to the order in which the drill points were picked during the geometry definition. Line This option enables you to define the direction of the sequenced drill positions machining. You have to define the direction by selecting two points on your model. The drill positions are arranged along the Direction line.
1. Click on the Pick line button. 2. The Pick first point dialog box is displayed. Enter the coordinate values and confirm with the Enter button or pick a position using the SolidWorks selection options. 3. The Pick second point dialog box is displayed. Define the end point of the direction line in the same manner. 4. Click on the Show sorted button to preview the sorted positions.
413
Advanced sorting This option enables you to sort the drill positions for machining of linear and circular drill patterns. The button displays the Advanced Sort dialog box.
Linear sorting
The Linear tab contains the sorting methods appropriate for machining of linear drill patterns.
Linear pattern
According to the linear sorting methods described above, the machining is performed either by rows of drill positions with the same Y-coordinate or by columns of drill positions with the same X-coordinate. The Tolerance parameter enables you to define the tolerance that is used to determine if a drill position belongs to the current row/column or to a different row/column. If the machining is performed by rows, SolidCAM determines the first drill position for each row (the start position of the first row is the start position of the whole pattern). For each next drill position, SolidCAM determines the Y-coordinate and compares it with the Y-coordinate of the first drill position of the current row. If the linear deviation is within the specified tolerance limit, SolidCAM considers this position to belong to the current row. If the deviation exceeds the tolerance value, the drill position is rejected from the current row; later this position will be checked again for belonging to next rows. In the similar manner, when the machining is performed by columns, the specified Tolerance value is used to determine whether a specific drill position belongs to the current column. In this case, the deviation of X-coordinates between the first drill position in the column and the current drill position is compared with the tolerance value.
414
6. 2.5D Milling
Linear sorting methods The following methods are available for advanced linear sorting:
SolidCAM determines the position with the minimal X- and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of increasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the next Y-coordinate (in the increasing order) and continues the machining of the next row from the position with the minimal X-coordinate to the position with the maximal X-coordinate (increasing order) and so on. In such manner, the machining of the rows is performed in the same direction of increasing X-coordinates. The ordering of rows is performed in the direction of increasing Y-coordinates.
SolidCAM determines the position with the and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of increasing X-coordinates.
minimal X-
When the last position of the current Y-coordinate is machined, SolidCAM passes to the next Y-coordinate (in the increasing order) and continues the machining of the next row from the position with the maximal X-coordinate to the position with the minimal X-coordinate (decreasing order), and so on. In such manner, the machining of two successive rows is performed in the opposite order: each odd row is machined in the direction of increasing X-coordinates, each even row is machined in the direction of decreasing X-coordinates. The rows are machined in the direction of the increasing Y-coordinates.
415
SolidCAM determines the position with the minimal X- and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of increasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the next X-coordinate (in the increasing order) and continues the machining of the next column from the position with the minimal Y-coordinate to the position with the maximal Y-coordinate (increasing order), and so on. In such manner, the machining of the columns is performed in the same direction of increasing Y-coordinates. The ordering of columns is performed in the direction of increasing X-coordinates.
minimal X-
SolidCAM determines the position with the and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of increasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the next X-coordinate (in the increasing order) and continues the machining of the next column from the position with the maximal Y-coordinate to the position with the minimal Y-coordinate (decreasing order), and so on. In such manner, the machining of two successive columns is performed in the opposite order: each odd column is machined in the direction of increasing Y-coordinates, each even column is machined in the direction of decreasing Y-coordinates. The columns are ordered in the direction of increasing X-coordinates.
416
6. 2.5D Milling
SolidCAM determines the position with the minimal X- and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of increasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the next X-coordinate (in the increasing order) and continues the machining of the next column from the position with the maximal Y-coordinate to the position with the minimal Y-coordinate (decreasing order), and so on. In such manner, the machining of two successive columns is performed in the opposite order: each odd column is machined in the direction of increasing Y-coordinates, each even column is machined in the direction of decreasing Y-coordinates. The columns are ordered in the direction of increasing X-coordinates.
SolidCAM determines the position with the minimal X-coordinate and the maximal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of increasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the previous Y-coordinate (in the decreasing order) and continues the machining of the next row from the position with the maximal X-coordinate to the position with the minimal X-coordinate (decreasing order), and so on. In such manner, the machining of two successive rows is performed in the opposite order: each odd row is machined in the direction of increasing X-coordinates, each even row is machined in the direction of decreasing X-coordinates. The rows are machined in the direction of the decreasing Y-coordinates.
417
SolidCAM determines the position with the minimal X-coordinate and the maximal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of decreasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the next X-coordinate (in the increasing order) and continues the machining of the next column from the position with the maximal Y-coordinate to the position with the minimal Y-coordinate (decreasing order), and so on. In such manner, the machining of the columns is performed in the same direction of decreasing Y-coordinates. The ordering of columns is performed in the direction of increasing X-coordinates.
SolidCAM determines the position with the minimal X-coordinate and the maximal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of decreasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the next X-coordinate (in the increasing order) and continues the machining of the next column from the position with the minimal Y-coordinate to the position with the maximal Y-coordinate (increasing order), and so on. In such manner, the machining of two successive columns is performed in the opposite order: each odd column is machined in the direction of decreasing Y-coordinates, each even column is machined in the direction of increasing Y-coordinates. The columns are ordered in the direction of increasing X-coordinates.
418
6. 2.5D Milling
SolidCAM determines the position with the maximal X-coordinate and the minimal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of decreasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the next Y-coordinate (in the increasing order) and continues the machining of the next row from the position with maximal X-coordinate to the position with the minimal X-coordinate (decreasing order), and so on. In such manner, the machining of the rows is performed in the same direction of decreasing X-coordinates. The ordering of rows is performed in the direction of increasing Y-coordinates.
SolidCAM determines the position with the maximal X-coordinate and the minimal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of decreasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the next Y-coordinate (in the increasing order) and continues the machining of the next row from the position with the minimal X-coordinate to the position with the maximal X-coordinate (increasing order), and so on. In such manner, the machining of two successive rows is performed in the opposite order: each odd row is machined in the direction of decreasing X-coordinates, each even row is machined in the direction of increasing X-coordinates. The rows are machined in the direction of increasing Y-coordinates.
419
SolidCAM determines the position with the maximal X-coordinate and the minimal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of increasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the previous X-coordinate (in the decreasing order) and continues the machining of the next column from the position with the minimal Y-coordinate to the position with the maximal Y-coordinate (increasing order), and so on. In such manner, the machining of the columns is performed in the same direction of increasing Y-coordinates. The ordering of columns is performed in the direction of decreasing X-coordinates.
SolidCAM determines the position with the maximal X-coordinate and the minimal Y-coordinate and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of increasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the previous X-coordinate (in the decreasing order) and continues the machining of the next column from the position with the maximal Y-coordinate to the position with the minimal Y-coordinate (decreasing order), and so on. In such manner, the machining of two successive columns is performed in the opposite order: each odd column is machined in the direction of increasing Y-coordinates, each even column is machined in the direction of decreasing Y-coordinates. The columns are ordered in the direction of decreasing X-coordinates.
420
6. 2.5D Milling
SolidCAM determines the position with the maximal X- and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of decreasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the previous Y-coordinate (in the decreasing order) and continues the machining of the next row from the position with the maximal X-coordinate to the position with the minimal X-coordinate (decreasing order), and so on. In such manner, the machining of the rows is performed in the same direction of decreasing X-coordinates. The ordering of rows is performed in the direction of decreasing Y-coordinates.
maximal X-
SolidCAM determines the position with the and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same Y-coordinate; the machining is performed in the direction of decreasing X-coordinates. When the last position of the current Y-coordinate is machined, SolidCAM passes to the previous Y-coordinate (in the decreasing order) and continues the machining of the next row from the position with the minimal X-coordinate to the position with the maximal X-coordinate (increasing order), and so on. In such manner, the machining of two successive rows is performed in the opposite order: each odd row is machined in the direction of decreasing X-coordinates, each even row is machined in the direction of increasing X-coordinates. The rows are machined in the direction of the decreasing Y-coordinates.
421
SolidCAM determines the position with the maximal X- and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of decreasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the previous X-coordinate (in the decreasing order) and continues the machining of the next column from the position with the maximal Y-coordinate to the position with the minimal Y-coordinate (decreasing order) and so on. In such manner, the machining of the columns is performed in the same direction of decreasing Y-coordinates. The ordering of columns is performed in the direction of decreasing X-coordinates.
maximal X-
SolidCAM determines the position with the and Y-coordinates and accepts it as the start position of the drill sequence. From this position, SolidCAM continues the machining of the drills with the same X-coordinate; the machining is performed in the direction of decreasing Y-coordinates. When the last position of the current X-coordinate is machined, SolidCAM passes to the previous X-coordinate (in the decreasing order) and continues the machining of the next column from the position with the minimal Y-coordinate to the position with the maximal Y-coordinate (increasing order), and so on. In such manner, the machining of two successive columns is performed in the opposite order; each odd column is machined in the direction of decreasing Y-coordinates, each even column is machined in the direction of increasing Y-coordinates. The columns are ordered in the direction of decreasing X-coordinates.
422
6. 2.5D Milling
Circular sorting
The Circular tab contains the sorting methods appropriate for machining of circular drill patterns. For the ordering of drill positions by all of the circular sorting methods, SolidCAM uses the center point around which the circular pattern is defined. For each drill position of the chosen geometry, SolidCAM determines the radial vector of the drill position from the center point. For each such vector, SolidCAM determines its length (radius) and the angle between the vector and the X-axis at the center point; these parameters are used for further sorting.
Circular pattern
This parameter enables you to define the angle at which the start position will be chosen. This angle is defined according to the positive direction of the X-axis at the pattern center. The default value of the parameter is 0.
Radius
Angle X
The Pick button enables you to define the Start angle by picking a point on the model. The Pick angle point dialog box enables you to pick the position on the model and displays the coordinates of the picked position.
423
When the position is picked and the dialog box is confirmed, SolidCAM determines the direction vector from the pattern center towards the picked position. SolidCAM automatically calculates the angle between the direction vector and the X-axis at the pattern center and displays the angle value in the Start angle edit box.
Tolerance
During the circular sorting, SolidCAM groups the drill positions into groups of those located at the same radius or into groups of those located at the same angle. The Tolerance value determines if a drill position belongs to the same radius group or not. For each group of drill positions located at the same radius, SolidCAM determines the start position; each additional drill position to be included into this group must be located at the radius that is within the tolerance from the radius of the start position. For each group of drill positions located at the same angle, SolidCAM determines the start position; each additional drill position to be included into this group must be located at the angle that is within the angular tolerance (calculated automatically according to the specified tolerance) from the angle of the start position.
Change sort center
By default, the pattern center is automatically defined at the origin of the Coordinate System used in the current operation. The Change sort center button enables you to change the pattern center location by picking on the model. The Pick center point dialog box enables you to pick the center position and displays the coordinates of the picked point.
424
6. 2.5D Milling
Circular sorting methods The following methods are available for advanced circular sorting:
For each drill position of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the clockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next smaller radius. At this radius, the machining is performed in the same clockwise direction.
For each drill position of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the clockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next greater radius. At this radius, the machining is performed in the same clockwise direction.
425
For each drill position of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the clockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next smaller radius. At this radius, the machining is performed in the counterclockwise direction. The next, smaller radius circle (a number of drills located at the same radius) is machined again in the clockwise direction. In such manner, the machining of odd circles is performed in the clockwise direction, the machining of even circles is performed in the counterclockwise direction.
For each drill position of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the clockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next greater radius. At this radius, the machining is performed in the counterclockwise direction. The next, greater radius circle is machined again in the clockwise direction. In such manner, the machining of odd circles is performed in the clockwise direction, the machining of even circles is performed in the counterclockwise direction.
426
6. 2.5D Milling
For each drill position of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the counterclockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next smaller radius. At this radius, the machining is performed in the same counterclockwise direction.
For each drill position of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the counterclockwise direction. When all the drill positions located at the current radius are machined, SolidCAM moves to the closest drill position located at the next greater radius. At this radius, the machining is performed in the same counterclockwise direction.
427
For each drill position of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the counterclockwise direction. When all the drills located at the current radius are machined, SolidCAM moves to the closest drill position located at the next smaller radius. At this radius, the machining is performed in the clockwise direction. The next smaller radius is machined again in the counterclockwise direction. In such manner, the machining of odd circles is performed in the counterclockwise direction; the machining of even circles is performed in the clockwise direction.
For each drill position of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located at the same radius; the machining is performed in the counterclockwise direction. When all the drills located at the current radius are machined, SolidCAM moves to the closest drill position located at the next greater radius. At this radius, the machining is performed in the clockwise direction. The next greater radius is machined again in the counterclockwise direction. In such manner, the machining of odd circles is performed in the counterclockwise direction; the machining of even circles is performed in the clockwise direction.
428
6. 2.5D Milling
For each drill position of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions with the same angle (according to the Angle tolerance value) starting from the start position towards the position located at the smallest radius (towards the pattern center). When the drill position located at the smallest radius is machined, SolidCAM moves in the clockwise direction to the next drill position located at the same smallest radius but at a different angle. From this drill position, SolidCAM performs the machining of the drill positions located at the same angle (according to the Angle tolerance value) towards the drill position located at the greatest radius (from the pattern center outwards). From this position, the tool moves in the clockwise direction to the next drill position located at the same greatest radius, but at a different angle, and so on. In other words, SolidCAM groups all the drill positions into radial rays, each ray containing a drill position located at the same angle. Each such ray is machined in the opposite direction; the first ray is machined towards the pattern center. The rays are ordered in the clockwise direction.
For each drill instance of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions with the same angle (according to the Angle tolerance value) starting from the start position towards the drill position with greatest radius (from the pattern center outwards).
429
When the drill position with the greatest radius is machined, SolidCAM moves in the clockwise direction to the next drill position located at the same greatest radius but at a different angle. From this drill position, SolidCAM performs the machining of the drill position located at the same angle (according to the Angle tolerance value) towards the drill position located at the smallest radius (towards the pattern center). From this position, the tool moves in the clockwise direction to the next drill position located at the same smallest radius, but at a different angle, and so on. In other words, SolidCAM groups all the drill positions into radial rays, each ray containing the drill position located at the same angle. Each such ray is machined in the opposite direction; the first ray is machined from the pattern center outwards. The rays are ordered in the clockwise direction.
For each drill instance of the chosen geometry, SolidCAM determines the drill position with the maximal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located with the same angle (according to the Angle tolerance value) starting from the start position towards the smallest radius (towards the pattern center). When the drill position with the smallest radius is machined, SolidCAM moves in the counterclockwise direction to the next drill position located at the same smallest radius but at a different angle. From this drill position, SolidCAM performs the machining of drill positions located at the same angle (according to the Angle tolerance value) towards the drill position located at the greatest radius (from the pattern center outwards). From this position, the tool moves in the counterclockwise direction to the next drill position located at the same greatest radius, but at a different angle, and so on. In other words, SolidCAM groups all the drill positions into radial rays, each ray containing the drill position located at the same angle. Each such ray is machined in the opposite direction; the first ray is machined towards the pattern center. The rays are ordered in the counterclockwise direction.
430
6. 2.5D Milling
For each drill instance of the chosen geometry, SolidCAM determines the drill position with the minimal radius located at the angle maximally close to the specified Start angle value. This position is accepted as the start position. From this position, SolidCAM performs the machining of all the drill positions located with the same angle (according to the Angle tolerance value) starting from the start position towards the drill position with the greatest radius (from the pattern center outwards). When the drill position with the greatest radius is machined, SolidCAM moves in the counterclockwise direction to the next drill position located at the same greatest radius but at a different angle. From this drill position, SolidCAM performs the machining of drill positions located at the same angle (according to the Angle tolerance value) towards the drill position located at the smallest radius (towards the pattern center). From this position, the tool moves in the counterclockwise direction to the next drill position located at the same smallest radius, but at a different angle, and so on. In other words, SolidCAM groups all the drill positions into radial rays, each ray containing the drill position located at the same angle. Each such ray is machined in the opposite direction; the first ray is machined from the pattern center outwards. The rays are ordered in the counterclockwise direction.
431
Direction Consider the defined line as the X-direction. SolidCAM groups together all the drill positions with the same X-coordinate. The order of machining of such groups is defined by the following options:
One way
Each group of drill positions is machined in the ascending order of Y-coordinates, i.e. after the last drill position of the group (maximal Y-coordinate), the tool moves to the first drill position (minimal Y-coordinate) of the next group.
Line Line
Zigzag
Each odd group of drill positions is machined in the ascending order of Y-coordinates, i.e. after the last drill position of the group (maximal Y-coordinate), the tool moves to the last drill position (maximal Y-coordinate) of the next group. The machining of the group is continued till the first drill position (minimal Y-coordinate) is reached, and then the tool moves to the first drill position (minimal Y-coordinate) of the next group.
Line
Line
432
6. 2.5D Milling
Distance This option minimizes the length of the necessary tool movement. The first drill is performed at the first point defined in the drill geometry. Any other drill is executed at the nearest position, i.e. at the shortest distance to the previous drill position.
Reverse drilling sequence SolidCAM enables you to reverse the sequence of drilling positions in Drilling operations. This functionality enables you to optimize the rapid movements during the machining and increase the machining speed. The Reverse check box enables you to reverse the sequence of drilling positions as shown. When the same sequence of drilling positions is used in several drilling operations (e.g. center drilling, drilling and threading) the sequence reversing enables you to reduce rapid movements between the operations.
1 3 5 6 2 4
Original sequence
4 3
2 1
Reversed sequence
This option is available only when the drill_proc parameter is set to N in the MAC file.
Show sorted This button displays the sorted sequence of drill positions on the solid model.
433
Drill cycle type Click on the Drill cycle type button. The Drill canned cycles supported by the post-processor of the current CNC-controller are displayed. Click on one of the icons to select the canned cycle you want to use in this operation.
SolidCAM Drilling cycles
Drill canned cycles must be defined in the *.mac and *.gpp post-processor of the currently active CNC-controller in your CAM-Part. Contact customer support to learn more about customizing your post-processor.
Drilling
The drill travels in one single motion to the specified depth and retracts.
F_Drill
The drill travels in one single motion to the specified depth, pauses for a specified amount of time and then retracts.
Delay
In the Value column, enter the amount of time (in seconds) you want the tool to pause at the depth point of the hole.
434
6. 2.5D Milling
Peck
The drill travels in steps to the specified depth. At each depth step the tool rapidly retracts to the safety distance. Then the tool rapidly returns to the point where it must continue drilling. These movements are repeated until the final depth is reached. When you click on the Data button, the Drill Options dialog box is displayed.
Delay
In the Value column, enter the amount of time (in seconds) you want the tool to pause at the depth point of the hole.
Step down
In the Value column, enter the depth that you want the tool to reach at each step.
Tapping
The tap travels in one single motion to the specified depth and then retracts reversing its spin direction.
Boring
The boring tool travels in one single motion to the specified depth, stop its spin motion and retracts rapidly.
R_Boring
The boring tool travels in one single motion to the specified depth, stops its spin motion, pauses for a specified amount of time and retracts rapidly.
Delay
In the Value column, enter the amount of time (in seconds) you want the tool to pause at the depth of the hole.
435
F_Boring
The boring tool travels in one single motion to the specified depth and retracts at the same feed rate, at which it entered.
Delay
In the Value column, enter the amount of time (in seconds) you want the tool to pause at the depth of the hole. The drill options are very closely related to the post-processor of the CNCcontroller you are using and may function differently in each case. Please contact your local dealer or SolidCAM support for information on your particular post-processor.
436
6. 2.5D Milling
The geometry for the Drill Recognition operation is defined using the AFRM functionality and is automatically recognized on the Target model, therefore the Target model must be defined in the CAM-Part before you define the operation. The hole recognition is performed in the direction parallel to the Z-axis of the Coordinate System chosen for the operation. The definition of the geometry is performed in the HR Drill Geometry Selection dialog box. The major steps of the HR Drill Geometry selection: Choose the model configuration used for the recognition; Set the selection filter options (Hole type, Hole diameter, Hole Upper level and Hole Height); Perform the holes recognition and generate the recognized holes tree; Choose the holes you want to include in the operation geometry; Preview the machining sequence.
437
HR Drill Geometry Selection dialog box This dialog box enables you to define the geometry and manage the parameters of the drill recognition. Name This option enables you to define the name of the geometry. SolidCAM offers you the Default Geometry name (see topic 12.9) that can be edited. Hole type This section sets the recognition filter of hole features according to their type. The Through check box enables you to recognize the through hole features. The Blind check box enables you to recognize the blind hole features. When none of these check boxes is selected, hole recognition cannot be performed and the Find Holes button is disabled. Hole diameter (d) When this section is activated, the hole features are filtered according to the diameter of the hole. With this filter, only the hole features with the Hole diameter value within the specified range are recognized. The From and To values enable you to define the Diameter range by entering the values or by picking on the solid model. When the cursor is placed in the From/To edit box, you can specify the diameter value by picking a specific cylindrical surface or a circular edge on the solid model. When a cylindrical surface or a circular edge is picked, its diameter is calculated and inserted into the corresponding edit box replacing the previous value. The edit box becomes pink. When you remove the automatically determined value, the edit box becomes white.
438
6. 2.5D Milling
The Thread only check box enables you to recognize only the hole features with threads. The thread recognition is performed according to the SolidCAM Settings. When this check box is selected, the From and To values define the range of the Thread diameter values. The From and To values can be defined by picking a cylindrical surface, cosmetic thread or circular edge on the solid model. Hole Upper level (u) When this section is activated, the hole features are filtered according to the Upper level. With this filter, only the hole features with the Upper level value within the specified range are recognized. The From and To values enable you to define the Upper level range by entering the values or by picking on the solid model. When the cursor is placed in the From/To edit box, you can specify the Upper level value by picking on the solid model. When a model point is picked, the Z-value of the picked position is calculated and inserted into the corresponding edit box replacing the previous value. The edit box becomes pink. When you remove the automatically determined value, the edit box becomes white. Hole height (h)
height.
When this section is activated, the hole features are filtered according to the Hole With this filter, only the hole features with the Hole height value within the specified range are recognized.
The From and To values enable you to define the Hole height range by entering the values or by picking on the solid model. When the cursor is placed in the From/To edit box, you can specify the Hole height value by picking on the solid model. When a model point is picked, the Z-value of the picked position is calculated and inserted into the corresponding edit box replacing the previous value. The edit box becomes pink. When you remove the automatically determined value, the edit box becomes white. Found holes Undo/Redo This section provides you with the Undo/Redo buttons that enable you to go back/ forward to a specific choice of holes found with a specific set of filter parameters. Options
Find Holes
This button performs the holes recognition and filtering of the recognized holes according to the criteria described above. The hole features matching the specified filter criteria will be displayed in the Holes Tree list.
439
Actually, the holes recognition is not performed each time when you click on the Find Holes button. When the holes recognition is performed the first time for a specific Z-axis direction, the recognized holes data is stored in the database and can be used for further geometry definition. When you click on the Find Holes button, SolidCAM retrieves the data from the database according to the filter settings and checks the synchronization between the data and the solid model. If the data in the database is not synchronized, a new holes recognition process is performed and filtering is reapplied.
Preview
This button displays the current drill geometry based on selected items in the Holes Tree list and the initial machining sequence. Click on the Resume button to return to the geometry definition. Holes Tree In the Holes Tree list, the hole features are classified into Shapes and Groups. A Shape contains all the hole features with the same topology; within a Shape, the Groups include all the hole features with the same dimensions. The check box near each item in the Holes Tree list enables you to select this item and include it in the current drill geometry. When a Group or a Shape is selected, all the hole features belonging to them are selected. The selected items are highlighted on the model. The right-click menu is available on the items in the list. The Select all command enables you to select all the recognized hole features and include in the drill geometry. The Unselect all command enables you to remove the selection from all the hole features in the list. The Show hole command displays the Hole Picture and Hole Parameters dialog boxes.
440
6. 2.5D Milling
The Hole Picture dialog box provides you with a schematic image of the selected hole feature. The Hole Parameters dialog box displays parameters of the selected hole feature. This dialog box displays the common hole feature data and the specific parameters of the hole feature segments.
Synchronization Synchronization in case of model change During the synchronization checking, SolidCAM checks the correspondence between the holes included in the geometry and the updated solid model. If a mismatch between the holes location is found, SolidCAM marks this geometry as not synchronized and enables you to synchronize it. During the synchronization, the holes locations are updated. If the location of a hole included in the geometry cannot be updated from the model (the hole is missing), this hole is excluded from the geometry. If all holes are excluded from the geometry, SolidCAM marks this geometry with an exclamation sign; such geometry requires manual editing and redefinition. Synchronization in case of Coordinate System change When the Coordinate System used for the geometry definition is changed, SolidCAM tries to recalculate all the hole features included in the geometry according to the updated Coordinate System position and orientation. When the axis of a hole included in the geometry is not parallel to the Z-axis of the updated Coordinate System, this hole is excluded from the geometry. If all holes are excluded from the geometry, SolidCAM marks this geometry with an exclamation sign; such geometry requires manual editing and redefinition. When the parallel relation between hole axis and Z-axis of the Coordinate System is preserved after the CoordSys update, SolidCAM recalculates the hole center coordinates according to the updated origin.
441
6. 2.5D Milling
All drill instances in the list can be selected. When one of them is selected, the relevant parameters are displayed in the Upper level, Drill depth, Delta depth and Depth type sections. The selected groups and drill instances are highlighted on the solid model. The right-click menu is available on each item in the list.
Restore Data from Model
This command enables you to restore and assign to selected item (a group or a single drill instance) the Upper level and Drill depth recognized on the Target model. The Delta depth value is restored to 0. The Depth type option is restored to Cutter tip. When the Restore Data from Model command is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters.
Restore Data from Model to All
This command restores the Upper level, Drill depth, Delta depth and Depth type data for all the drill instances in the list. When the Restore Data from Model to All command is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters. Diameter (D) This section enables you to set the diameter value and apply it to a single hole, a group or all holes. Upper level (u) This section enables you to set the value of the Upper level and apply it to a single hole, a group or all holes. The edit box displays the Upper level value of the selected item (a group or a hole). The edit box enables you to enter the value or pick the value directly from the model (when the cursor is placed in the edit box). SolidCAM enables you to pick planar faces parallel to the XY-plane of the Coordinate System, model vertices and sketch points. When a model is picked, the Z-value of the picked position is displayed in the edit box. The edit box has pink background, which means that the parameter is defined associatively to the solid model. When the edit box value is typed in, it is not associative to the model; in this case the edit box has white background.
443
The Apply button enables you to apply the defined Upper level value to the selected list item (a group or a hole). When a new Upper level value is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters. SolidCAM checks all the groups to find a group with identical Upper level, Drill depth, Delta depth and Depth type parameters. If such group is found, SolidCAM adds the updated drill to this group. In case of absence of a suitable group, a new group is created; the updated drill instance is added to this group. The Apply button is not available until you change the value in the edit box. The All check box enables you to apply the updated Upper level value to all drill instances. Drill depth (d) This section enables you to define the value of the drilling depth and apply it to a single hole, a group or all holes. The edit box displays the Drill depth value of the selected item (a group or a hole). The edit box enables you enter the value or pick the value directly from the model (when the cursor is placed in the edit box). SolidCAM enables you to pick drill faces or edges. SolidCAM determines the depth of the picked drill according to the defined Upper level and displays the value in the edit box. The edit box has pink background, which means that the parameter is defined associatively to the solid model. When the edit box value is typed in, it is not associative to the model; in this case the edit box has white background. The Apply button enables you to apply the defined Drill depth value to the selected list item (a group or a hole). When a new Drill depth value is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters. SolidCAM checks all groups to find a group with identical Upper level, Drill depth, Delta depth and Depth type parameters. If such group is found, SolidCAM adds the updated drill to this group. In case of absence of a suitable group, a new group is created; the updated drill instance is added to this group. The Apply button is not available until you change the value in the edit box. The All check box enables you to apply the updated Drill depth value to all drill instances. Delta depth (dd) This section enables you to set the Delta depth value and apply it to a single hole, a group or all holes. The edit box displays the Delta depth value of the selected item (a group or a hole). The default value is 0.
444
6. 2.5D Milling
The Apply button enables you to apply the defined Delta depth value to the selected list item (a group or a hole). When a new Delta depth value is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters. SolidCAM checks all groups to find a group with identical Upper level, Drill depth, Delta depth and Depth type parameters. If such group is found, SolidCAM adds the updated drill to this group. In case of absence of a suitable group, a new group is created; the updated drill instance is added to this group. The Apply button is not available until you change the value in the edit box. The All check box enables you to apply the updated Delta depth value to all the drill instances. Depth type This section enables you to define the Depth type for a single hole, a group or all holes. You can define the diameter on the conical part of the drilling tool that will reach the specified drilling depth during the machining. You can also deepen a drilled hole in order to obtain a given diameter at the specified drill depth. The following options are available:
Cutter tip
The drill reaches the defined drilling depth with the full diameter.
Diameter value
The drill reaches the defined drilling depth with the drill cone diameter specified by the Diameter value parameter. When this option is chosen for chamfer machining, SolidCAM determines the diameter of the upper cylindrical segment of the drill instance and compares it with the tool diameter. If the determined diameter is smaller than the tool diameter, the determined diameter is accepted as the default for the Diameter value. If the determined diameter is greater than or equal to the tool diameter, the tool diameter value is accepted as the default for the Diameter value parameter. The Apply button enables you to apply the defined Depth type to the selected list item (a group or a hole). When a new Depth type is applied, SolidCAM checks the Holes tree items and reorganizes them into groups according to the changed parameters. SolidCAM checks all groups to find a group with identical Upper level, Drill depth, Delta depth and Depth type parameters. If such group is found, SolidCAM adds the updated drill to this group.
445
In case of absence of a suitable group, a new group is created; the updated drill instance is added to this group. The Apply button is not available until you change the current Depth type option. The All check box enables you to apply the updated Depth type option to all the drill instances.
Sequence of drill positions This section enables you to define the sequence of the drill positions, manage its direction, etc. For more information, see topic 6.6.3. Drill cycle type Click on the Drill cycle type button. The Drill canned cycles supported by the post-processor of the current CNC-controller are displayed. Click on one of the icons to select the canned cycle you want to use in this operation. For more information, see topic 6.6.3.
446
6. 2.5D Milling
447
Depth definition This section enables you to define the depth of the thread by Value or by Number of threads.
threads.
The generated helical tool path is affected by the following tool parameters: Pitch and Number of
Additional depth This option enables you to deepen the threading by a certain value. In the Deeper field, enter the additional depth value required.
Start from beginning
When you have added a certain depth to be thread-milled, there is in some cases a need to start the cutting of the thread from the beginning. This is possible with the Start from beginning check box. For example, you thread-milled one drill hole out of 10 identical holes to a certain depth. Then you found that the threading is not deep enough, and added a certain additional depth. Then you thread-milled the hole again (without starting from the beginning, because there is no point in cutting the thread again where it is already cut) and made sure that the depth is now satisfactory. To thread-mill the rest of the holes, you need to start cutting from the very beginning, because these holes were not previously machined, as the first hole.
448
6. 2.5D Milling
Sequence of thread positions This section enables you to define the sequence of the thread positions, manage its direction, etc. Default The threads are performed according to the order in which the center points were picked during the geometry definition. Line This option enables you to define the direction of the sequenced thread positions machining. Distance This option minimizes the length of the necessary tool movement. The first thread is performed at the first point defined in the geometry. Subsequent threads are executed according to the nearest position, i.e. at the shortest distance to the previous thread position. Advanced sorting This option enables you to sort the drill positions for machining of linear and circular drill patterns. Show sorted This button displays the sorted sequence of drill positions on the solid model. For more information, see topic 6.6.3.
449
Compensation If the Compensation check box is selected, the tool radius compensation options G4x of the CNCcontroller are used in the GCode. Thread data This section enables you to define the geometry parameters of the thread. Type This section enables you to choose the Internal or External type of machining. The Major thread diameter parameter enables you to define the largest diameter of the machined thread.
Internal External
Direction This section enables you to choose either Left hand or Right hand direction of the machined thread.
Left hand
Right hand
Cut from This section enables you to define the direction of thread machining. The thread can be machined either from Top to bottom or from Bottom to top.
Top to bottom
Bottom to top
450
6. 2.5D Milling
Multi-Passes
Rough
This section defines the parameters of the rough machining of the thread. It generates several concentric helical passes that start at the Clear offset distance from the thread and finish up to the thread, thus cutting the thread profile in a number of constant Step over steps. The Step over value defines the offset between two successive concentric helical profiles. The Thread offset value defines the distance that remains after the last step over up to the finish pass.
Finish
This section enables you to perform the thread finishing. The Number of passes parameter enables you to define the number of finish paths generated to achieve the best surface quality. Start Angle
This parameter defines the start angle of the thread relative to the X-axis direction.
Start angle
451
Lead in/out arc Arc radius This box defines the radius of the arc with which the tool enters and exits the material. This option is available only for the external threading. Flat approach/Flat retreat The tool enters and exits the material (depending on the direction set in the Cut from section) at the height of the lower plane of the thread hole.
452
6. 2.5D Milling
453
Depth type There are two methods to define the depth of the slot. Choose the depth type (Constant or Section) and click on the Data button to enter additional parameters.
SolidCAM Slot depth types Constant Section
Constant depth type This option produces a slot with a uniform depth. The Constant Depth Data dialog box is displayed.
454
6. 2.5D Milling
Tool side
Specify the side of the slot profile at which you want to mill. The tool side is always relative to the direction of the slot chain geometry. Right: the tool cuts on the right side of the profile geometry at the distance defined as the value of Profile offset. Left: the tool cuts on the left side of the profile geometry at the distance defined by the value of Profile offset. Center: the center of the tool moves on the profile geometry (the cutter radius compensation G4x cannot be used with this option). When the Zigzag option is used, the Tool side combo-box defines the tool location for the first cut. For each successive cutting pass, the tool position is changed relative to the geometry direction.
Profile offset
If the Compensation check box is selected, the tool radius compensation options G4x of the CNC-controller are used in the GCode.
Depth cutting type
The One way option enables you to create the tool path with only one-directional movements. The Zigzag option enables you to create the tool path with bi-directional movements.
Slot extension
Zigzag
One way
This option enables you to extend the end of the slot without additional geometric construction and without editing the slot geometry. The Distance parameter controls the slot extension.
455
This option enables you to add a radius to a sharp corner without changing the geometry. For more information on this subject, see topic 6.1.2.
Slot levels
This value defines the depth of the slot relative to the Upper level. Click on the Depth button to pick the Z-level from the 3D model.
Delta depth
This value defines the offset for the cutting depth that can be changed with its associativity preserved. This parameter is always relative to the Depth defined for the operation. If the Delta depth value is positive, a blue arrow is displayed near its field indicating a positive offset value (in the positive direction of the Z-axis). If the Delta depth value is negative, a red arrow is displayed near its field indicating a negative offset value (in the negative direction of the Z-axis).
Step down
456
6. 2.5D Milling
Complete Z-level
This option enables you to define the order of Z-levels milling in the machining of several slots in one operation. When the Complete Z-Level check box is not selected, the machining is performed as follows: the first chain of the slot geometry is machined at all Z-levels, then the next chain is machined accordingly.
1 3 5 7 9 11 12 2 4 6 8 10
When the Complete Z-Level check box is selected, all chains of the slot geometry are machined at a specific Z-level, then the next Z-level is machined accordingly.
1 2 3 4 5 6 7 8 9 10 11 12
This check box is not available when the Zigzag option is chosen for Depth cutting type.
457
Section depth type When you click on the Data button, the Section Slot Data dialog box is displayed.
Section geometry name
The section specifies the depth profile for this slot operation. As the geometry for this 2.5D operation is designed using 2D profiles and sections, a reference point is required to indicate the position of the Upper level.
Section (Depth prole)
Slot Geometry
This value determines the quality of the resulting surface on the floor of the slot. The smaller the value, the smoother is the surface.
Descent Angle
The tool plunges into the material with the given ramp angle. The default value of 90 degrees causes a normal approach into the material. The tool enters the material at an angle to the first slot profile. If the tool path length required to perform the ramp angle is longer than the slot profile, SolidCAM generates a zigzag movement to plunge into the material.
Rough, Semi-finish and Finish cycles Rough cycle
If you check this option, the rough operation clears the slot before the semifinish operation is performed.
458
6. 2.5D Milling
Enter the Step down between two successive cuts during roughing. Define the offset that remains on the slot walls and floor after the roughing cut in the Rough/Semi-finish offset field.
Finish cycle
Check this option if you intend to semi-finish and/or finish the slot. Choose the cycles you want to perform from the list. Semi-finish: the slot is machined at the offset specified in the Rough/ Semi-finish offset field. Finish: the slot is machined to its final dimensions and specified surface scallop. Both: the slot is machined first with a semi-finish and then a finishing cut.
Offset for Rough/Semi-finish
This value specifies the offset that remains on the slot after the rough and semi-finish operations. This offset is removed in the last finish cut.
Technology Tool side
Specify the side of the slot profile at which you want to mill. The tool side is always relative to the direction of the slots chain geometry. Right: the tool machines on the right side of the slot geometry. The cut leaves material on the profile equal to the specified Offset on profile value. Left: the tool machines on the left side of the slot geometry. The cut leaves material on the profile equal to the specified Offset on profile value. Center: the center of the tool moves on the profile geometry. When the Zigzag option is used, the Tool side combo-box defines the tool location for the first cut. For each successive cutting pass, the tool position is changed relative to the geometry direction.
459
With additional parameters for the right and left extension, the Center option enables you to machine slots that are wider than the tool diameter. The given side step value is used to cut from the right to the left side. Note that the side definition is always relative to the direction of the slot profile. Check the direction of the profile by clicking on the Show button in the Section Geometry name area of the Slot Operation dialog box.
Right extension: enter the distance by which the slot is extended to the right side (relative to profile direction). Left extension: enter the distance by which the slot is extended to the left side (relative to profile direction). Side step: enter the tools side step in successive tool paths.
Cutting direction
The One way option enables you to create the tool path with only one-directional movements. The Zigzag option enables you to create the tool path with bi-directional movements.
Zigzag
One way
460
6. 2.5D Milling
461
462
6. 2.5D Milling
When you click Add Operation, T-Slot, the T-Slot Operation dialog box is displayed.
463
Tool data definition The Data button displays the Operation Tool Data dialog box. This dialog box displays the tool material, feed and speed parameters and the diameter and length offset numbers used in the current operation. The Second offset number parameter defines the register number of the upper cutting face offset, in the offset table of the CNC-machine. This option enables SolidCAM to automatically take into account the minor size differences between the defined tool and the one actually used for cutting the workpiece, if there are any. You may choose not to use this option by clearing the check box.
464
6. 2.5D Milling
Tool side This option enables you to define the tool position relative to the geometry.
Left
Right
Center
Right: the tool cuts to the right of the profile geometry at the distance defined by the values set in Modify offset. Left: the tool cuts to the left of the profile geometry at the distance defined by the values set in Modify offset. Center: the center of the tool moves on the profile geometry (the compensation cannot be used with this option). When the Zigzag option is used, the Tool side combo-box defines the tool location for the first cut. For each successive cutting pass, the tool position is changed relative to the geometry direction.
465
Geometry
This button enables you to modify a geometry shared by several operations separately for each operation.
Compensation
If the Compensation check box is selected, the tool radius compensation options G4x of the CNC-controller are used in the GCode. For more information, see topic 6.1.2. Offsets To perform the rough machining of the slot, you have to specify various offsets on the slot geometry.
Wall offset
This option defines the offset that will remain on the slot wall after roughing.
Wall offset
Ceiling offset
This option defines the offset that will remain on the slot ceiling after roughing.
Ceiling offset
466
6. 2.5D Milling
Floor offset
This option defines the offset that will remain on the slot floor after roughing.
Floor offset
When the One way option is chosen, the cutting passes are oriented in the same direction and connection between them is performed through the Operation Clearance level. At the end of each pass the tool performs a retreat movement to the Operation Clearance level, a horizontal movement at rapid feed to the start point of the next pass and then descends to the Z-level of the next pass. The same cutting direction (climb or conventional) is kept along the whole tool path.
When the Zigzag option is chosen, the tool path is performed in a zigzag manner, with the tool path direction changing from one pass to the next. The passes located at two successive Z-levels are connected directly from the end of one pass to the beginning of the next pass. The Zigzag option cannot be used together with the Clear offset technology.
Fillet size for last cut This option enables you to add a radius to a sharp corner without changing the geometry. For more information on this option, see topic 6.1.2.
467
Rough This section enables you to perform the rough machining of the slot. Clear offset This option generates several concentric profiles with constant depth that start at the defined clear offset distance from the profile and finish at the geometry of the profile, thus clearing the area around the profile.
Step over
Wall offset
Clear offset
Modify offset
The Offset option defines the distance from the geometry at which the milling starts. The Offset value must be equal to or greater than the Wall offset value. The tool starts milling the profile at the distance defined by Clear offset and finishes at the distance defined by Wall offset. The Step over option defines the overlap of adjacent tool paths. It determines the offset between two successive concentric profiles. Clear offset The Zigzag option enables you to create the tool path for the Clear offset removal containing both climb and conventional movements.
tool path
Prole geometry
The One way option enables you to create the tool path for the Clear offset removal containing only climb movements.
Prole geometry
468
6. 2.5D Milling
Finish This section enables you to perform the finishing of the slot. By selecting the check boxes, you can choose the offsets (Ceiling, Wall and Floor) you want to remove in the finish pass. Number of passes SolidCAM enables you to generate several finish passes to achieve the best surface quality. You can define the number of finish passes. Extension/Overlap This option enables you to extend the profile in the positive profile direction. Cutting depth overlap
This parameter defines the overlap of each two adjacent tool paths, in both the rough and finish machining of the slot.
Cutting depth overlap Cutting depth overlap
469
Cut from This option enables you to define the direction of machining. The rough and finish machining of the slot can be performed in the following directions:
Top to bottom Bottom to top Middle to bottom Middle to top
Ramping This section determines how the tool approaches the start point of the contour. For more information on Ramping options, see topic 6.1.3. Lead in/Lead out These options enable you to control the way the tool approaches and retreats from the profile. For more information on Lead in/Lead out options, see topic 6.1.3.
470
6. 2.5D Milling
471
Section geometry name A translated surface requires two geometries: the profile along which the section is translated and the section geometry. The geometries in this example result in the following translated surface:
Section Geometry
Prole Geometry
For detailed explanation of section geometry definition, see topic 4.4.4. Process type The Translated Surface operation can be used to mill surfaces and also to engrave profiles, such as text, on a translated surface.
Translated Surface Process Type
Surface
Engraving
To engrave a profile on a translated surface, use the Translated Surface operation that you used to mill the surface as a template. Click Add Operation, Translated Surface and select the original Translated Surface operation from the Operation name list in the operation dialog box. All the geometries and parameters of the original operation are copied. Choose the Process type and click on the Data button to define additional parameters.
472
6. 2.5D Milling
Surface data for translated surfaces When you click on the Data button, the Translated Surface Data dialog box is displayed.
Offset on surface
This value causes the final milled surface to be at an Offset from the defined surface.
Offset
Section
Scallop
This value determines how smooth the resulting surface finish will be. The smaller the value, the smoother is the surface finish. The value is used for both the finishing and the semi-finishing operation.
Overlap
Scallop
This value defines the tool overlap for adjacent tool paths during roughing operations. The value of 0.6 means that the tool will overlap 60% to the next tool path. For the tool diameter of 10 mm, the resulting side step is 4 mm. Additionally, this value defines the maximum side step used in finishing and semifinishing operations if the calculated scallop allows a wider side step.
Z-Entry angle
The tool plunges into the material with the given ramp angle. The default value of 90 degrees causes a normal approach into the material. The tool enters the material at an angle to the first line or arc of the tool path. If the length required to perform the ramp angle is longer than the first tool path movement, SolidCAM generates a zigzag movement to plunge into the material.
Connect type Zigzag:
the surface is milled with both conventional and climb tool movements.
One way: the surface is milled only in one direction. This option cannot be used if you use Limits for the translated surface.
473
Rough cycle
When this check box is selected, a roughing operation clears the surface area before the semi-finishing operation is performed. Enter the Step down between two successive cuts during roughing. Define the offset that remains on the surface walls and floor after the roughing cut in the Rough/Semi-finish offset field.
Finish cycle
Select this check box if you intend to semi-finish and/or finish the translated surface. Choose the cycles you want to perform from the list.
Semi-finish: the geometry finish offset field. Finish:
scallop.
cut.
Both: the geometry is machined first with a semi-finishing cut and then a finishing
Rough/Semi-finish offset
This value specifies the offset that remains on the surface after roughing and semi-finishing operations. This offset is removed in the last finishing cut. Engraving data for Translated Surface operation When you click on the Data button, the Engraving Data dialog box is displayed.
Surface offset
This value causes the final milled surface to be at an Offset from the defined surface.
Offset
Section
Scallop
This value determines how smooth the resulting surface finish will be. Use smaller values for a smoother surface finish. The value is used for both finishing and semi-finishing operations.
Scallop
474
6. 2.5D Milling
Overlap
This value defines the tool overlap for adjacent tool paths during roughing operations. The value of 0.6 means that the tool will overlap 60% to the next tool path. For a tool diameter of 10 mm, the resulting a side step is 4 mm. Additionally, this value defines the maximum side step used in semi-finishing and finishing operations if the calculated scallop allows a wider side step.
Descent angle
The tool plunges into the material with the given ramp angle. The default value of 90 degrees causes a normal approach into the material. The tool enters the material at an angle to the first line or arc of the tool path. If the length required to perform the ramp angle is longer than the first tool path movement, SolidCAM generates a zigzag movement to plunge into the material. Tool side This option determines on which side of the profile the section is machined. Use the Show surface button to display the current tool position relative to the profile geometry. The geometry direction set in the Reverse geometry field also affects the tool side option. Right: the tool path is generated on the right side of the profile geometry. Left: the tool path is generated on the left side of the profile geometry. The Geometry button displays the Modify Geometry dialog box that enables you to modify a geometry shared by several operations separately for each operation (see topic 6.1.2). Limits A limit is a profile geometry that can be used to define additional 2D profiles on the surface and to exclude areas on the surface from machining. If you would like to use a limit on your translated surface, select the Limits check box and click on the Data button. To use the Engraving process type, you must specify the Engraving geometry and additional parameters in the Engraving Profile dialog box.
Translated Surface Limit Type
Surface
Engraving
475
Limit data for translated surface When you click on the Data button, the Surface Limit dialog box is displayed.
The geometries in the example result in the following translated surface with limits:
Limit geometry name
In this section, specify which contour, i.e. profile geometry you want to use as the Limit. Note that the Limit geometry must be closed.
Machining area Outside Limit geometry:
machined.
Inside Limit geometry:
Limit
Prole
476
6. 2.5D Milling
Offset on Limit geometry
After machining, the CAM-Part has remaining material on the limit geometry equal to this value.
Finish on Limit
Select this check box if you intend to semi-finish and/or finish the limits on the translated surface. Use the lists to choose the cycles you want to perform.
Type
The Finish option machines the limit to its final dimensions in one step down. The Semi-finish option prepares the limits to an offset specified in the Offset field with a cutting depth defined in the Step down field. The Both option machines the limit first with a semi-finish cut and then with a finishing cut.
Side
If the Limit geometry is composed of one or more chains, but neither is placed inside another chain, the default option Both should be used. SolidCAM will then use the relevant finish side depending on whether the Limit type is Outside or Inside.
In this example, the Limit geometry contains a chain inside another chain (Chain #2 inside Chain #1) and a separate limit Chain #3. The External option finishes all outside contours of the Limit chains, leaving the inside hole unfinished.
Finish cuts
477
The Internal option finishes only the inside contour of the Limit chain, leaving the outside Limit contours unfinished.
Finish cuts
The Both option finishes all inside and outside contours of the Limit chains.
Finish cuts
Cutting direction
This field defines the cutting direction on the last finish cut. It can be either clockwise (CW) or counterclockwise (CCW).
Semi-finish offset
Enter the offset that will remain on the surface after the semi-finish operation. This offset will be removed in a last cut, if a finish cut has been specified.
Semi-finish Step down
The step down defines the cutting depth of the tool on the Limit geometries used for the semi-finishing operation.
478
6. 2.5D Milling
Engraving Limit for Translated Surface Operation When you click on the Data button, the Engraving Profile dialog box is displayed.
Engraving depth
The depth of the engraved profile on the translated surface must be entered in the Upper level field of the operation dialog box. If you want to penetrate the translated surface by 1.0, you have to enter the value of -1.0 into the Upper level field. In this example, a text was defined as the Engraving Limit geometry and engraved on a translated surface.
Engraving geometry
In this section you have to specify the contour, i.e. profile geometry, which you want to engrave on the translated surface.
Finish options Type
This option enables you to semi-finish and/or finish the engraved profile on the translated surface. The Semi-finish option machines the engraving profile to an offset specified in the Offset field with cutting depths given in the Step down field. The Finish option machines the engraving profile to its final dimensions in one step down. The Both option machines the limit first with a semi-finishing cut and then with a finishing cut.
479
Side
The tool can cut on the left/right to the profile or on the engraving geometry. Right: the tool cuts on the right side of the profile geometry up to the distance defined by the Offset value. Left: the tool cuts on the left side of the profile geometry at the distance defined by the Offset value. Center: the center of the tool moves on the profile geometry.
Offset
You can specify the offset from the engraving geometry for a semi-finishing operation on the left or right side of the geometry. This offset is removed with the finishing cut, if you have defined one.
Step down
This value defines the successive Z-cutting depth during the semi-finishing operation of the engraving profile. Geometry on Section This option enables you to locate the section on the profile. Start: the profile geometry is located at the start of the section and the machining is performed from the start of the section towards the end of the section. End: the profile geometry is located at the end of the section and the machining is performed from the end of the section towards the start of the section.
Start Section Geometry Start point End point End point End Start point Prole Start point Section Prole
Prole Geometry
480
6. 2.5D Milling
Constraint This option enables you to control the tool movement at the start and end of the profile/section. Leave this option unselected to use no constraints at all.
Both
P2 P3
No
End
Prole P3
P2
Section
Section
Section P2
P2 P3
P3
Prole
No
P2 P3 Section P3
P2 Section
Both
End
481
Lead in/Lead out You can control the way the tool leads in to/out from the geometry. Choose an option from the list and enter the distance value for this option. SolidCAM enables you to use the following Lead in/Lead out options:
None Normal Arc Tangent Point
482
3D Milling
SolidCAM 3D Milling can be used for both prismatic parts and complex 3D models. For prismatic parts, SolidCAM analyzes the model and automatically recognizes pockets and profiles to be machined using Z-constant machining strategies. For molds, electrodes and prototypes, SolidCAM offers powerful 3D machining, including advanced High Speed Machining strategies and integrated rest material options. No matter how complex is the model, SolidCAM provides the optimal approach and roughing strategy with superior 3D finish machining for mold and die applications. 3D Milling Operation Roughing strategies Semi-finishing & Finishing strategies 3D Engraving Operation 3D Drilling Operation
Geometry boundaries
Tool
484
7. 3D Milling
The Working Area dialog box enables you to choose the type of working area and set the related parameters. The working area can be defined using one or a combination of the following methods:
Working area Working area geometry Angle limits Selected faces Rest material
The resulting working area boundary is generated as a boolean combination of the following: User-defined planar geometry with an offset; Selected drive surfaces; Selected check surfaces with an offset; Surface angle minimum and maximum limits. The generated working area boundary is then used either for tool path generation (e.g. Circular pocket, Constant Step over, etc.) or as a boundary to trim the tool path (Linear, Pencil milling, etc.). Working area definition via Geometry In this section, you have to specify the working area geometry that defines the machining boundaries for the operation. If you have already defined working area geometries for this CAM-Part, you can choose the geometry from the Name list. The Show button displays the chosen geometry in the SolidWorks window. The Define button enables you to select a new working area geometry. For more information on Geometry selection, see topic 4.4.1.
485
Working area definition via Rest material With the Cut only in rest material option, you can limit the machining to the rest material. Rest material is what has to be machined after the previous operations in order to reach the Target model. When the Cut only the Rest material option is chosen for the Working area definition, SolidCAM calculates the Updated Stock model (USM) after all the previous operations. SolidCAM automatically compares the USM with the target model and generates the rest material areas.
The rest material left after semi-finishing operations with a big tool
This option enables you to use the previously generated USM for the rest material calculation. This field is available only when the Manual method of Updated Stock model calculation is used.
486
7. 3D Milling
Show 3D
This button displays the SolidVerify simulation with the USM and the Rest material in comparison with the 3D Model geometry used in the operation.
Updated Stock Model calculation
SolidCAM offers two modes of Updated Stock model calculation: Automatic and Manual. The mode can be specified for the CAM-Part with the Updated Stock calculation page in the Part Settings dialog box (see topic 2.10.3). The same modes are used for the SolidVerify USM calculation.
Automatic mode
During the operation calculation process, SolidCAM runs the SolidVerify simulation of all the previous operations in the invisible mode. The resulting USM is saved in *.STFRM file in the CAM-Part folder. SolidCAM calculates the USM according to the Updated Stock Accuracy Settings. During the USM calculation process for the current operation, SolidCAM generates intermediate USM files for the previous operations and saves them according to the Updated Stock model method settings. The saved USM files can be used for the Rest material calculation of additional operations. These intermediate USM files are removed when the CAM-Part is closed. If the USM file for some operation already exists, SolidCAM checks the compliance between accuracy settings of the USM and Updated Stock Accuracy Settings of the CAM-Part. If these settings concur, SolidCAM uses the existing USM, otherwise the USM is recalculated in accordance with the CAM-Part Settings.
Manual mode
In the Manual mode, SolidCAM enables you to save the USM manually after the SolidVerify simulation and use it for the Working area definition with the Cut only the Rest material option. When the simulation of a separate operation or a number of operations is performed in the SolidVerify mode, the Save Machined stock to file button enables you to save the USM in the *.STF file. The name of the file is the same as the name of the last simulated operation. In the Machined Stock name box, you can choose any previously saved USM.
487
SolidCAM automatically deletes USM files for a specific operation when: the operation was deleted; the operation was changed and it caused the deletion of the operation PCode; the operation sequence was changed; the accuracy parameters were changed; the working mode was switched from Manual to Automatic.
Updated Stock Model interchangeability
Updated Stock models generated for the SolidVerify simulation and for 3D Milling of Rest material areas are interchangeable. This means that SolidCAM can use USM files generated for the SolidVerify simulation instead of USM files for 3D Milling and vice versa. If the USM file for SolidVerify simulation is already generated for some operation, it can be used also for Rest material if the Accuracy settings of the USM match the Updated Stock Accuracy Settings of the CAM-Part. Working area definition via Angle limits This option enables you to define the working area by surface inclination angle range. Using this method, you can apply various machining strategies to model areas with different inclination. For example, you can machine all shallow areas with the Linear finishing strategy and all steep areas with the Constant Z strategy.
488
7. 3D Milling
Angle limit calculation
In each point where the tool contacts the machining surface, SolidCAM determines the normal vector at the contact point, directed to the tool sphere center (for ball-nosed tools); for end mills with rounded corners, the vector is directed from the contact point to the radius center. The angle of this vector relative to the Z-axis is used for the angle limits calculation. The Angle limits section of the Working Area dialog box enables you to define the angle range.
The Minimum angle value defines the lower limit of the angle range. The Maximum angle value defines the upper limit of the angle range. A particular feature of the Angle limits method is related to machining of model edges: it is impossible to determine a single contact point between the edge and the tool surface. The tool rolls over the edge, continuously keeping in contact until the angle of the normal vector at the contact point is in the defined range. The resulting tool path is rounded. Such tool path rounding causes the breaking of the sharp corners. The machining time is also increased. The Trim rounding option enables you to avoid unnecessary tool path rounding. When this check box is selected, the tool path gets trimmed at the point where the tool axis is coincident to the surface boundary.
Rounded tool path
Rounding trimmed
489
Working area definition via Face selection You can define the area of the 3D Model machining with two sets of model faces: Drive faces the set of faces to be milled. The tool path is generated only for machining of these faces. Check faces the set of faces to be avoided during the generation of the tool path.
Check faces
Drive faces
Other faces of the model are not considered during the tool path calculation. for the model shown above, SolidCAM generates the tool path only for the shallow area. During the calculation, gouging of the check faces is avoided. The remaining faces do not participate in the tool path calculation.
Example:
The above capability is available through the Work on selected faces area in the Working area dialog box.
Drive faces
Specify the Face geometry for Drive faces. If you have already defined such geometries for this CAM-Part, you can choose the geometry from the Name list. The Define button enables you to define a new Face geometry with the Select Faces dialog box. The Show button displays the Face geometry on the SolidWorks model.
Check faces
Specify the Face geometry for Check faces. If you have already defined such geometries for this CAM-Part, you can choose the geometry from the Name list. The Define button enables you to define a new Face geometry with the Select Faces dialog box. The Show button displays the Face geometry on the SolidWorks model.
490
7. 3D Milling
SolidCAM enables you to specify the Offset for the check faces when machining is performed on selected faces. Using this offset, SolidCAM enables you to perform the machining at a safety distance from the check surfaces.
Offset Check face Drive face Drive face Check face
This dialog box enables you to select one or several faces of the SolidWorks model. The selected face icons are displayed in the Faces section.
If you have selected a wrong face, click on it again to undo your selection. You can also right-click on the face name in the list (the face is highlighted) and choose Unselect from the menu.
491
The CAD selection option enables you to select faces with the SolidWorks tools.
Faces
This section enables you to display and edit the normals of model surfaces during the geometry selection. The Show Direction for highlighted faces only check box enables you to display the surface normals for the specific highlighted faces in the faces list.
The Show Direction for selected faces check box enables you to display the normals direction for all the faces in the list.
The right-click menu available on the items in the Faces list enables you to reverse the direction of the surface normals of the chosen faces (the Reverse command) or of all the selected faces (the Reverse all command).
492
7. 3D Milling
Select faces dialog box for Check faces
This dialog box enables you to select one or several check faces of the SolidWorks model. The selected face icons are displayed in the Faces section.
If you have selected a wrong face, click on it again to undo your selection. You can also right-click on the face name in the list (the face is highlighted) and choose Unselect from the menu.
Select Check faces
The CAD Selection option enables you to select faces with the SolidWorks tools. The All faces adjacent to drive faces button automatically adds all the model faces adjacent to the defined Drive faces to the selection list.
Faces
This section enables you to display and edit the normals of model surfaces during the geometry selection. Tool on working area This option controls the tool position relative to the boundaries of the working area. Since the working area geometry is always projected on a 2D plane, viewing the model and working area in the top view shows exactly till where the tool machines the model.
493
Internal
The tool machines up to the boundary of the working area. The center point moves at an offset equal to the tool radius.
Working Area Geometry
Tool
External
The tool machines over the boundary of the working area by a distance equal to the tool diameter.
Working Area Geometry
Tool
Center
The tool machines the working area until the tool center is positioned on the working area.
Working Area Geometry
Tool
494
7. 3D Milling
Tangent
The Internal/External/Center methods of the working area definition have several limitations. In some cases, the limitation of the tool path by planar working area results in unmachined areas or corners rounding. The Tangent option enables you to avoid these problems. When this option is chosen, SolidCAM generates the tool path boundaries by projecting the planar working area on the 3D model. The tool path is limited in such a way that the tool is tangent to the model faces at the boundary. This option enables you to machine the exact working area, taking into account the 3D model geometry.
The tool is tangent to the projection of the working area onto the model faces
Unmachined area
When the Tangent option is used, SolidCAM automatically recognizes through holes and cuts inside the working area and prevents the tool from entering these areas.
495
This value enables you to specify the offset of the tool center. A positive offset value enlarges the working area; a negative value reduces the working area to be machined.
To stay away from a pockets wall, for example, you can use the Internal option with a small negative offset value. To prevent the tool from plunging down a straight wall of a block, you can use the Middle option with an offset smaller than the tool radius. Also, with the same result, you can use the External option with a small negative offset value. Tool path trimming When the tool path is generated by a projection strategy (Linear, Circular pocket, etc.), SolidCAM projects the planar pattern on the model. When there is no model geometry in the specific point of the pattern (e.g. holes in the model), the pattern is projected onto the virtual infinite XY-plane located at the Operation Lower level.
Tool path
The Tool path trimming options enable you Operation Lower level and movements above
496
7. 3D Milling
The 3D Milling Operation interface offers all three machining types Rough, Semi-Finish and Finish Milling in one dialog box. This enables you to perform all machining operations in one operation. You need to add another operation only if the tool, the milling levels or the working area is going to change from one operation to another.
497
7.1.3 Roughing
Rough milling removes the bulk of material surrounding the 3D Model. The material is removed on Z-levels controlled by the Operation Upper level, Surface offset and Step down values. To remove large amounts of material, large tools, small feeds and low tolerances are usually used. Three strategies are available for rough machining of 3D Models.
SolidCAM Roughing
Contour
and Hatch strategies perform rough cuts on constant Z-levels that are automatically calculated using the specified values of Lower level, Surface offset and Step down. is a totally different concept of removing material from a given pocket, carried out with a special tool. Instead of milling the material, the tool moves up and down as in a drilling motion, travelling along the specified path type.
Plunging
The strategy and technological parameters are defined in the Rough section of Technology page of the 3D Milling Operation dialog box. Choose one of the strategies and specify the additional parameters. Overlap Enter the Overlap of adjacent tool passes. The default value is 0.5 (50%). With a tool diameter of 10, an overlap of 0.7 would mean a side step of 3.0 for the next tool movement. Avoid using values smaller than 0.3.
498
7. 3D Milling
Equal step over
This option enables you to generate the hatch tool path spaced evenly with the automatically calculated Overlap value, which is nearest to the specified Min. Overlap value but not smaller than this value. When this check box is not selected, the distance between the last pass and the one before it can be smaller than that between all of the other passes.
Overlap
Overlap
When this check box is selected, the evenly spaced hatch tool path is generated.
Overlap
Overlap
The overlap between two successive passes is not smaller than the specified Min. Overlap value. Step down SolidCAM uses the constant Z pocketing for the roughing. The Step down parameter defines the distance between each two successive Z-levels. Enter the tools cutting depth.
499
Clean flat SolidCAM generates a set of Z-levels with equal step down. Sometimes the model ledge with the specified offset falls between the Z-levels defined by Step down and cannot be machined in the current operation.
Z-levels with the equal Step down Model with the offset
When this option is chosen, the tool machines only at each step down distance. Anything in between is not machined.
Clean flat after roughing
When this option is chosen, the tool performs complete roughing at each step down level and then returns to the flat areas between the step down levels.
Clean flat during roughing
When this option is chosen, SolidCAM produces tool paths at the step down level. At this point, the tool machines the flat area located between the step down levels. After completing the flat area, it goes to the next step down. Offsets is the minimum offset of material in the X-, Y- and Z-direction that remains on the model contour. The value defines the closest distance the tool can get to the model. The rough operation is performed at constant Z-levels.
Surface offset
In addition to the specified Surface offset, the roughed model shows stairs of rest material with a height equal to the Step down value. To obtain a uniform offset on the model, a semi-finish operation should be executed.
Surface offset Model surface
500
7. 3D Milling
In 3D Milling of prismatic parts, you often need to use different offset values for vertical and horizontal areas. With the Wall offset value, you can define the XY-offset of any surface that is not absolutely flat. To define the Z-offset to the absolute horizontal (flat) surfaces, use the Floor offset parameter.
Wall offset Floor offset
Use the Wall and Flat offsets for 3D machining of prismatic parts. In 3D Milling of non-prismatic parts, it is best to use surface offset and not Floor and Wall offsets. Set the Wall and Flat offsets to 0 and enter the desired value of the Surface offset. Z-Entry This option enables you to control how the tool plunges into the material. Click on the Z-Entry button to display the Z-Entry dialog box.
None
The tool plunges into the material with a normal downward movement at the specified Z-feed rate.
501
Angle
When you choose the Angle type and enter the Angle value, the tool enters the material with a ramp movement. The ramp starts from the given safety distance down to the model contour. If, due to the model contour, the ramp cannot be created in a straight line, the Z-Entry movement follows the contour. When you work with small Z-Entry angles such as two degrees, you can reduce the length of the Z-Entry movement by decreasing the Safety distance value. Make sure, though, that the initial offset on the raw material allows for changing the Safety distance value.
Helical
The tool enters the material in a spiral movement according to the defined step down, angle and radius. If your tool has center cutting capabilities, select the Center cutting check box. In the Angle field, enter the Z-Entry angle that you would like the tool to follow. In the Radius field, enter the radius of the tool path. The working order is as follows: The tool descends from the safety distance above the Upper level to the material in a circular motion until the step down is reached, using the user-defined radius. When the tool reaches the step down depth, it machines all the material at the step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Safety distance above the previous step down depth and repeats the helical Z-Entry to the next working depth. This process repeats itself until the final depth has been machined.
502
7. 3D Milling
If the tool does not have center cutting capabilities, do not select the Center cutting check box. In the Tool step down field, enter the depth of the step down of the tool. The result of this action is the same as that of the center cutting tool except for the following differences: The tool descends from the Safety distance above the Upper level to the material in a circular motion up to the Tool Step down. At this point, the tool clears the circular path. Then it descends to the next Tool Step down. This is repeated until the tool reaches the CAM-Parts step down depth. When the tool reaches the step down depth, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Safety distance above the previous step down depth and repeats the Helical Z-Entry to the next working depth. This process repeats itself until the final depth has been machined.
Linear
The Linear Z-Entry follows the same rules as the Helical. The difference is that the Z-Entry is performed in a linear zigzag fashion rather than in a circular one. If your tool has center cutting capabilities, select the Center cutting check box. In the Linear dialog box, enter the length of the linear tool path that you would like the tool to travel. The working order is as follows: The tool descends from the Safety distance above the Upper level to the material in a zigzag motion based on the user defined angle and length until the step down is reached.
503
When the tool reaches the step down depth, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Safety distance above the previous step down depth and repeats the Linear Z-Entry to the next working depth. This process repeats itself until the final depth has been machined. If the tool does not have center cutting capabilities, do not select the Center cutting check box. In the Tool step down field, enter the depth of the step down you want the tool go to. The result of this action is the same as with a center cutting tool except for the following differences: The tool descends from the Safety distance above the Upper level to the material in a zigzag motion up to the Tool Step down. At this point the tool clears a straight linear path. Then it descends to the next Tool Step down. This is repeated until the tool reaches the CAM-Parts step down depth. When the tool reaches the step down depth, it machines all the material on that step down depth. When the machining is completed at this depth, the tool goes up to the Clearance level. At this stage, the tool repositions itself at the Safety distance above the previous step down depth and repeats the Linear Z-Entry to the next working depth. This process repeats itself until the final depth has been machined. Return to Clearance level between Z-steps This option enables you to control the height where the horizontal rapid movement is performed.
Clearance level
504
7. 3D Milling
When this check box is selected (default), SolidCAM performs horizontal rapid movements at the Clearance level of the operation.
Clearance level
Safety distance
When this check box is not selected, SolidCAM performs horizontal rapid movements at the Safety distance from the last cut and checks for possible collisions. In areas where the rapid movements at the Safety distance causes gouges, SolidCAM performs the horizontal rapid movements at the Clearance level. Drill points SolidCAM enables you to perform the approach to the material from the hole previously machined in 3D Drilling operation (see topic 7.3). The 3D Drilling operation has to precede the 3D Milling operation in SolidCAM Manager. SolidCAM enables you to choose the geometry used for the 3D Drilling operation in order to define the approach point.
Drill point
Material to be removed
Mode (Open Pocket machining) SolidCAM locates open pocket areas and enables you to machine them with a specific strategy. This strategy enables you to combine pocket and profile tool paths in order to provide the best productivity in open pocket machining. The Open Pocket machining option is available to use in 3D Milling operation for Roughing and Constant Z Floor machining strategy (see topic 7.1.13). The Mode button displays the Open pocket mode dialog box.
505
Closed areas at each step down are milled as Pockets. SolidCAM analyzes the open areas to be machined and decides whether the Pocket or Profile mode is optimal to be used. When the open areas are machined in a pocket manner, the tool path is extended over the open edges.
Profile
Closed areas at each step down are milled as Pockets. Open areas at each step down are milled by several equidistant Profiles from outside the model. The tool moves in offsets parallel to the contour of the section on the specified Z-levels. When this option is chosen, you can define the Lead in strategy (see topic 6.1.3) for the profiles.
Proles
The Profile mode is useful when you are milling a boss-type model (e.g. Core of Mold). Force open pockets as closed This option enables you to process all open pockets as closed pockets. In this case, the tool path is not extended over the pocket edges. In the areas where the pocket tool path cannot be performed the machining is not performed. Profile Lead in In the Profile Lead in list, you can choose one of the following options:
None Normal Arc Tangent
7. 3D Milling
Approach open pocket from outside This option enables the tool to approach from outside of the material in the open pocket areas, if possible. Such approach enables you to decrease the tool load when plunging into the material. This option enables you to perform the approach movement from the automatically calculated point outside of the material. The tool approaches to the necessary depth outside of the material and then plunges into the material. In closed areas, where outside approach is impossible, the tool plunges into the material with a strategy defined in the Z-Entry field of the operation dialog box. Rest Material With the 3D Roughing strategy, SolidCAM generates a number of sections parallel to the XY-plane of the CAM-Part Coordinate System. These sections are generated with a Z-step defined either by constant step down or by scallop. In each of these sections, the section profile geometry is used to produce a pocket tool path. The Rest material feature enables SolidCAM to machine in each of these sections only in areas the previous tool has not been able to machine. When a large tool is used around the profile, it leaves material in corners that it cannot enter.
Working area Rest Material areas
507
The Rest material option enables you to remove the material from this area without defining a new geometry. The Rest Material dialog box is displayed. In this dialog box, you have to define the following parameters: Previous tool diameter the diameter of the rough end mill used in the previous operation. Previous wall offset the wall offset of the previous operation. Extension the overlap distance that you would like to start and end from the previous larger end mill.
Extension
Rest Material
Milling type If you choose Separate areas, SolidCAM generates a profile or pocket tool path to clean areas that the previous tool could not mill. The Around profile strategy generates a closed profile to mill the rest material.
Separate areas:
SolidCAM machines only the areas not machined with the previous tool.
Around Profile:
profile.
508
7. 3D Milling
In 3D Milling and Pocket operations with the Separate areas machining strategy, SolidCAM generates two types of tool paths, depending on the volume of the rest material and on the previous and present tool diameters:
SolidCAM generates a pocket or a profile tool path in each area of the rest material.
Pocket-style tool path areas can be either open or closed depending on the approach possibilities.
Closed pocket-style tool path area Open pocket-style tool path area
The approach to the open pockets can be performed from the machined space in contrast to the closed pockets where the approach from the outside is unavailable.
509
The Z-Entry strategy defined in the 3D Milling Operation dialog box provides you with the approach functionality for the closed pocket areas. The following Z-Entry options can be chosen:
None Angle Helical Linear
Approach point
SolidCAM automatically determines the optimal point for the approach to the open pocket areas. Lead in/out
The Lead in and Lead out options define the approach/retreat strategy for the Profilestyle tool path areas. The following strategies are available: None
Normal Arc
For more information on these options, see topic 6.1.3. Pocket/Profile The check boxes selected in the Pocket and Profile sections determine which of these tool paths are cut: Island only tool paths that touch the pocket islands are cut. Island + Wall tool paths that touch both the pocket wall and islands are cut. Wall only tool paths that touch the wall are cut.
510
7. 3D Milling
Compensation When the Compensation dialog box is selected, tool radius compensation commands are used (G41, G42 for Fanuc) in GCode output. Open contour strategy This option enables you to define the direction of the open contours machining.
One way
The tool moves along an open contour at a specific Z-level. At the end of the contour, the tool moves with rapid feed (G0) to the Safety distance and then starts machining the open contour at the next Z-level. The tool will always use climb or conventional milling.
Zigzag
The tool finishes an open contour at the specific Z-level and then moves directly to the next Z-level and so on. It mills forward and backward without leaving the material, thus constantly switching between climb and conventional milling.
Complete Z-level This option enables you to define the order of the machining Z-levels. Consider the CAM-Part with two cavities that must be machined with 3D Milling: either with roughing strategies or with the Constant Z finishing strategy.
511
When the Complete Z-Level check box is not selected, the machining is performed in the following order: the first cavity area is finished by a number of cuts (1-4), then the second cavity is machined (cuts 5-8).
1 2 3 4
5 6 7 8
When the Complete Z-Level check box is selected, the machining is performed in the following order: SolidCAM removes material at a specific Z-level in both of the cavities and then moves to the next Z-level.
1 3 5 7
2 4
6 8
Vertical wall with fillets This option enables special handling of vertical walls with fillets between them in a prismatic part. SolidCAM generates a smoother and more exact tool path. As a result, the calculation time for the operation is reduced and the GCode is shorter and uses G2/G3 arc movements for the fillets. This option is suitable for prismatic parts that conform to the following conditions: The walls are vertical (perpendicular to the machining plane); There are no holes in the vertical walls. Fillet size for last cut This option enables you to add a radius to a sharp corners of the tool path without changing the geometry. For more information on this subject, see topic 6.1.2.
512
7. 3D Milling
removing material from a given pocket with a special tool. Instead of milling the material, the tool moves up and down as in a drilling motion, travelling along the path type you choose. Click on the Data button. The Plunging dialog box is displayed. For more information on the Plunging parameters, see topic 6.4.3.
513
7.1.7 Semi-Finish/Finish
machining generates the tool path directly on the surfaces and solids of your 3D Model geometry. No offset can be specified and the model is machined to its final topology and dimensions. You can apply a number of different machining strategies to finish your models. Each one of the strategies offers parameters to adjust the strategy to your needs.
Finish Semi-finish machining prepares the model for finishing. After semifinishing the model, a uniform offset remains on the material. This offset is removed in the last finishing cut. In contrast to rough operations, in conventional semi-finishing operations higher feed rates and narrower tolerances are applied.
The same machining strategies in Finish machining can be applied for Semi-finishing. They only differ in one additional parameter, Surface offset, that controls the X,Y and Z offset that remains on the original surface. Otherwise, all strategies are defined and used in the same way as in finishing. In the Semi-Finish area, choose a strategy from the list. Plunging SolidCAM enables you to use the special plunging strategies for semifinishing. 1. Click on the Plunging button. 2. Set the plunging parameters in the Plunging dialog box. For more information on the Plunging parameters, see topic 6.4.3. Offsets
Surface offset
a minimum offset of material in the X-, Y- and Z-direction remains on the model contour. The value defines the closest distance the tool can get to the model.
Surface offset
In addition to the specified Surface offset, the roughed model shows stairs of rest material with a height equal to the down step value. In order to obtain a uniform Model surface offset on the model, a semi-finish operation should be executed.
514
7. 3D Milling
In 3D Milling of prismatic parts, you often need to use different offset values for vertical and horizontal areas. With the Wall offset value, you can define the XY offset of any surface that is not absolutely flat. To define the Z offset to the absolute horizontal (flat) surfaces, use the Floor offset parameter.
Wall offset Floor offset
Use the Wall and Flat offsets available to set different offset values to the floor and walls only in Constant Z machining. If you use negative offsets, for example, for plunge EDM electrode milling, the corner radius of the tool must be equal to or larger than the specified offset value. Data This button enables you to customize parameters for a chosen strategy. Z-Entry This option enables you to control how the tool plunges into the material. Click on the Z-Entry button to display the Z-Entry dialog box.
515
None
When Z-Entry is set to None or the default Angle value is 90 degrees, the tool plunges into the material with a normal downward movement at the specified Z-feed rate.
Z-Entry: None
Tool path
The tool plunges with a ramp movement. The ramp starts from the given safety distance down to the model contour on the current Z-level. If, due to the model contour, the ramp cannot be created in a straight line, the approach movement follows the contour.
The tool plunges with a ramp movement. The ramp movement for the first Z-level starts from the given safety distance. The next ramp movements are performed between the Z-levels. If, due to the model contour, the ramp cannot be created in a straight line, the Z-Entry movement follows the contour. This option is available only with the Constant Z finish strategy.
Arc
The tool plunges with an arc movement (with a specified radius) in the vertical plane.
Tool path
Z-Entry: Arc
7. 3D Milling
Tool path arrangement SolidCAM provides you with improved arrangement of the tool path generated by the projection strategies (Linear, Circular pocket, etc.) to minimize the number of jumps between the tool path segments. Consider the tool path generated by the Linear strategy. SolidCAM generates the planar pattern and projects it on the model.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
The resulting tool path is trimmed by the working area; as a result some of the tool path lines are divided into a number of segments.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
At the next stage, SolidCAM connects the tool path lines into several continuous chains (in this example three chains), in such a way as to minimize the jumps between them.
1 3
2
517
The Stay on surface within gap of options enable you to control the tool path connection.
With the Along path parameter, you can define the connection method for the segments of the tool path line.
4 5 6 7
In the illustration above, several tool path lines (#2 #6) are divided into two segments, i.e. they have a gap. When connecting the tool path, SolidCAM compares the gap length with the Along path value. When the gap length is greater than the Along path value, SolidCAM connects the current segment with the closest segment of the next tool path line. The resulting tool path is performed in a number of continuous chains connected by the necessary jumps. This method is preferable for large gaps.
Gap
518
7. 3D Milling
When the gap length is smaller than the Along path value, the segments of the tool path line are connected with the cutting movements directly on the surface. The resulting tool path is continuous and free of jumps. This method is preferable for small gaps.
Gap
The Between paths value determines the way the tool path lines and separate tool path chains are linked. When the distance between tool path chains is smaller than the specified value, the tool paths are connected with the cutting movements directly on the surface.
Link movement
When the distance between tool path is greater than the specified Between paths value, the tool paths are connected with rapid movements via the Operation Clearance level.
Link movement
When the distance between tool path lines is greater than the Between paths value, the tool path lines are also connected with rapid movements.
519
Linear Offset cutting Spiral Circular pocket Constant Step over Constant Z Pencil Milling
520
7. 3D Milling
Direction type These options control the direction of the tool on each line of the linear pattern that has been projected on the model. Different materials and cutters require specific cutting conditions, e.g. some tools give better surface finish when cutting only downward; in other applications you need to use other settings to achieve optimum results.
Zigzag
The tool finishes one line of the linear pattern and then directly moves to the next line, and so on. It mills forward and backward without leaving the material, thus constantly switching between climb and conventional milling.
Connection radius: you can connect lines of the linear tool path with a radius. Radius value is 0, SolidCAM connects the linear tool path with straight lines.
If the
The tool finishes one line of the linear pattern. At the end of the line, the tool rapidly moves (G0) to the safety distance and then to the start of the next cut line. The tool always uses climb or conventional milling.
521
The tool always cuts from the lowest point of the tool path line to the highest point. From the highest point of the cut, the tool moves rapidly to the start point of the next cut.
The tool always cuts from the highest point of the tool path line to the lowest point. From the lowest point of the cut, the tool moves rapidly to the start point of the next cut.
Enter the angle value that defines the orientation of the tool path. The value of 0 generates the tool path lines in the direction of the positive X-axis.
Line
The Define button is available and you can define a line that determines the orientation of the tool path. The direction vector is defined by picking two points that define the start point and the end point of the direction line. The angle of the selected line is the output to the angle field. Technology
Step over
In linear finishing, SolidCAM generates a line pattern on a 2D plane above the model and then projects it on the 3D model. The Step over value determines the constant distance between all lines of the linear pattern created on the 2D plane before it is projected.
522
7. 3D Milling
Scallop
This option enables you to control the distance between the tool path lines by the cusp height you want to achieve on the finished model. SolidCAM adjusts the distance between the single lines of the 2D pattern (before projection on the model) to the topology of the model to match the specified scallop height.
Maximum step over
On flat areas, bull nose tool can achieve a small scallop with a rather large step over. You can use this value if you want to limit the chip load on the tool or the cutting forces that a large step over could cause.
Arc approximation
You can create G2/G3 GCode output from Linear finish operations. SolidCAM checks whether successive points of the calculated tool path can be connected using an arc or circle. If an arc or circle connection within the specified arc approximation tolerance can be made, you will receive arc and G2 and G3 circle interpolation commands in the generated GCode. This feature can drastically reduce the number of lines in GCode files. Most CNC-controllers and machines work much faster on arcs and circles than on single tool path points or splines. Arc approximation will increase actual feed rates on older CNC-machines and the machine will work smoother. The Tolerance value defines the tolerance SolidCAM uses to position tool path points on arcs or circles Cross finish
None
Linear machining is performed only in the direction you have specified and no cross finish is executed.
Normal
After finishing the model in the first specified direction, another linear finish is performed at an angle of 90 to the first cutting direction. The complete area that has been machined in the first cut linear operation is machined again.
523
Smart
The areas that have not been finished within the given scallop during the first linear finish operation at an angle of 90 to the first cut are machined again. The values of Maximum step over and Minimum step over affect the calculation. If the scallop can be achieved using step over larger than the minimum step over, no cross finish is necessary some other constellation could result in all the working area to be re-machined.
Minimum step over
This value can be used to avoid tool paths that are too narrow. You can, for example, enter a scallop of 0.02. For some areas SolidCAM would calculate a distance between two lines with 0.01 or less (at very steep walls). To reduce machining time and to avoid long GCode files, you can limit the minimum step over of the tool to 0.05.
If you select one Profile, you must specify the clear offset distance. On the right side of the profile, relative to the chain direction, the machining will be performed until the specified clear offset distance has been reached. In this example, the Offset Profile has been machined normal to the profile geometry. When you define two Offset profiles, both profile geometries are connected and the tool path is projected on the 3D Model. When you click on the Data button, the Offset Finish dialog box is displayed.
Offset Geometry
Tool path
524
7. 3D Milling
Offset geometry In this section, specify which profile geometry you want to use for the offset finish. Cutting area
Clear offset
This value determines the offset distance from the profile that will be machined in the right direction of the geometry. This field is active if you use an offset geometry that consists of only one profile. In case the geometry has two profiles, this field will be inactive, as the profiles will be automatically connected.
Step over
In offset finish, SolidCAM generates the offset pattern on a 2D plane above the model and then projects it on the 3D Model. The step over value determines the constant distance between all lines of the offset pattern created on the 2D plane before it will be projected.
Tool side
This option enables you to define the working side of the geometry.
Geometry orientation
525
Cutting direction
Cross Finish
Select this check box if you want to perform a Cross finish on the offset area. After finishing the model in the first specified direction, i.e. parallel or normal to the profile geometry, the other possible option will also be applied.
First cutting direction
If you have selected the Cross finish check box, both cutting directions will be applied to the offset area. Select the direction you want to use first. When no cross finish is used, only the selected option will be performed.
Parallel to geometry
SolidCAM will generate a pattern with offset lines parallel to the offset profile geometry. This pattern will then be projected on the model.
Normal to geometry
SolidCAM will generate a pattern with offset lines normal (90 degrees) to the offset profile geometry. This pattern will then be projected on the model. Tool path connections
Direction type: Zigzag
The tool finishes one line of the offset pattern and then moves directly to the next line and so on. It mills forward and backward without leaving the material thus constantly switching between climb and conventional milling.
Direction type: One way
The tool finishes one line of the linear pattern. At the end of the line, the tool rapidly moves (G0) to the safety distance and then to the start of the next cut line. The tool will always use climb or conventional milling.
526
7. 3D Milling
Connection type
This option enables you to control the way the tool moves between two adjacent tool passes.
Stairs
When this option is chosen, the tool moves in two steps between two adjacent tool passes. If the next pass is lower than the present pass, the tool first moves away from the surface in the XY-direction and then downwards in Z. In case the next pass is higher than the present pass, the tool first moves upwards in Z and then approaches the surface in the XY-direction.
Smooth
Between two adjacent tool passes, the tool moves on the surface of the model. The line connecting the two adjacent tool passes is projected on the model. When you use this option, the tool does not leave material when moving to the start point of the next pass.
type
527
Path type: Linear Additional parameters: Start Angle End Angle Delta Angle
Path type: Spiral Profile type: Arcs Additional parameters: Start Angle End Angle Start Radius End Radius Delta Radius
Profile type: Lines Additional parameters: Start Radius End Radius Delta Radius
528
7. 3D Milling
Path type: Square Profile type: Arcs Additional parameters: Start Angle End Angle Start Radius End Radius Delta Radius
Profile type: Lines Additional parameters: Start Radius End Radius Delta Radius
529
Cutting direction The spiral is machined in the clockwise (CW) or counterclockwise (CCW) direction. The direction also affects the machined angle area. Machining always starts at the angle given in Start angle up to the End angle in the cutting direction. Angle You can limit the angle area that will be machined by setting values for the Start and End angle. The direction of the positive X-axis is entered with a value of 0 degrees. Machining will always start from the given start angle and will move in the cutting direction towards the end angle. The Delta angle is used to specify the angle steps of the tool path spiral in the Path type: Linear option. Radius You can set values for the Start and End radius of the tool path spiral. The Delta radius specifies the offset distance to the next circle or spiral circumference of the tool path spiral. Pick center of tool path spiral This button enables you to define the center of the tool path spiral that will be projected on the model. If you do not choose any center, the system uses the current Coordinate system origin as the center of the spiral. Enter the X,Y,Z coordinates of the center point into the Pick center point of tool path spiral dialog box or define a point by picking and confirm by clicking on the button. Tool path connections
Direction type: Zigzag
The tool finishes one line of the spiral pattern and then moves directly to the next tool path line and so on. It mills forward and backward without leaving the material, thus constantly switching between climb milling and conventional milling.
530
7. 3D Milling
Direction type: One way
The tool moves finishes one line of the linear pattern. At the end of the line, the tool rapidly moves (G0) to the safety distance and then to the start of the next cut line. The tool will always use climb or conventional milling.
Connection type
This option enables you to control the way the tool moves between two adjacent tool passes.
Stairs
The tool moves in two steps between two adjacent tool passes. If the next pass is lower than the present pass, the tool first moves away from the surface in the XY-direction and then downwards in Z. In case the next pass is higher than the present pass, the tool first moves upwards in Z and then approaches the surface in the XY-direction.
Smooth
Between two adjacent tool passes, the tool moves on the surface of the model. The line connecting the two adjacent tool passes is projected on the model. When you use the Smooth option, the tool does not leave material when moving to the start point of the next pass.
531
The Circular Pocket Finish dialog box displays the parameters of the Circular Pocket Finish strategy. Cutting direction The pocket can be machined in Conventional or Climb direction. Start from The machining can be started from Outside or Inside the pocket.
The combination of both fields, Cutting direction and Start from, will result in climb or conventional milling. Select CCW/Outside or CW/Inside to perform climb milling; any other combination will result in conventional milling of the model. Connection type This option enables you to control the way the tool moves between two adjacent tool passes.
Stairs
The tool moves in two steps between two adjacent tool passes. If the next pass is lower than the present pass, the tool first moves away from the surface in the XY-direction and then downwards in Z. In case the next pass is higher than the present pass, the tool first moves upwards in Z and then approaches the surface in the XY-direction.
Smooth
Between two adjacent tool passes, the tool moves on the surface of the model. The line connecting the two adjacent tool passes is projected on the model. When you use the Smooth option, the tool does not leave material when moving to the start point of the next pass.
532
7. 3D Milling
Step over In pocket finishing, SolidCAM generates the pocket line pattern on a 2D plane above the model and then projects it on the 3D Model. The step over value determines the constant distance between the lines of the pocket created on the 2D plane before it will be projected on the model.
533
Constant Z wall machining Select the check box to machine all areas of the model that are not parallel to the XY-plane, i.e. are not planar. The step down can be controlled by two options: Constant step down Starting from the Upper level, SolidCAM will use the specified step down to calculate each successive Z-level. A value of 20 for the Upper level and a constant step down of 1.5 will produce a tool path on the model contour at Z20, Z18.5, Z17, Z15.5, etc. until the Lower level is reached.
Variable step down SolidCAM will automatically calculate the necessary steps down to produce the specified scallop (cusp height) on the model surface. On steep areas, the step down will naturally be larger than on more level areas.
Scallop
The Scallop value determines the cusp height of the resulting surface finish. The smaller the value, the smoother the surface finish will be.
Maximum step down
Scallop
On vertical walls of the model, SolidCAM could apply large steps down as this would theoretically result in the scallop value of 0. To avoid large cutting depth and tool load, you can limit the maximum step between two successive Z-levels.
Minimum step down
On nearly level areas, the necessary down step to achieve the specified scallop could be very small. You can set a minimum down step value that will override the smaller down step generated by the scallop calculation.
534
7. 3D Milling
Enter the angle that defines the start position of the tool path. The value of 0 will generate the tool path start point on the intersection of the contour and the positive X-axis.
Line
When you choose this option, the Define button is activated and you can define a line that determines the orientation of the tool path. The direction vector is defined by picking two points that define the start point and end point of the direction line. The angle of the selected line will be output to the angle field. Arc approximation This command enables you to create G2/G3 GCode output from Constant Z operations. SolidCAM checks whether successive points of the calculated tool path can be connected using an arc or circle. If an arc or circle connection within the specified arc approximation tolerance can be made, you will receive arc and G2 and G3 circle interpolation commands in the generated GCode. This feature can drastically reduce the number of lines in GCode files. Most CNC-controllers and machines work much faster on arcs and circles than on single tool path points or splines. Arc approximation will increase actual feed rates on older CNC-machines and the machine will work smoother. The Tolerance value defines the tolerance SolidCAM uses to position tool path points on arcs or circles. The arc approximation value should be smaller than the specified value for the surface offset. A warning message will be displayed if a larger value could cause gouging of the model. Lead in/Lead out You can control the way the tool leads in and leads out from the profile. Select an option from the list and enter the distance value for this option.
535
For more information on the Lead in/Lead out options, see topic 6.1.3. Compensation This option enables SolidCAM to use the tool radius compensation options G4x of the CNC-controller in the GCode output. Clean contours of flat areas In prismatic solid parts, if there is a ledge at a depth that falls between down steps or a wall at the edge of a flat bottom of Constant Z machining, SolidCAM can still recognize this ledge or wall and machine it as if in a Profile operation (between the machining of the previous and next Z-steps). Connection type This option enables you to control the way the tool moves between two adjacent tool passes.
Stairs
The tool moves in two steps between two adjacent tool passes. If the next pass is lower than the present pass, the tool first moves away from the surface in the XY-direction and then downwards in Z. In case the next pass is higher than the present pass, the tool first moves upwards in Z and then approaches the surface in the XY-direction.
Tangential
Between two adjacent tool passes, the tool moves away from the contour in a tangent movement. It continues in a 3D arc/spiral movement to the next Z-level and then approaches the contour in another tangent movement.
536
7. 3D Milling
The Tangential tool path connection smooths lead in/out moves and is especially useful for High Speed Machining. You can avoid witness marks on the model that can be caused from a Z approach movement on the model surface. The Approach radius parameter defines the radius of the 3D arc that is used to create the tangential move between two successive Z-levels. The value is the maximum radius used as SolidCAM will automatically reduce the radius if the model topology will not leave enough space to approach with the specified radius. This could happen in narrow cavities of the model when a large tool is being used. Cutting direction (Cut from)
Top to bottom
The machining starts on the Upper level and continue downward in the -Z direction until the Lower level is reached. The tool finishes one line of the linear pattern, moves directly to the next line and so on. It mills forward and backward without leaving the material, thus constantly changing between climb milling and conventional milling.
Bottom to top
The machining starts from the Lower level and continue towards the Upper level. Milling type
Climb
The tool cuts on the left side of the model contour. Unless the selected Open contour strategy is set to Zigzag, contours are always machined in the climb milling direction.
Conventional
The tool will cut on the right side of the model contour. On outside contours, this will generate a tool path in clockwise direction. Open contour strategy This field controls the milling direction on contours that cannot be closed because the model or a specified working area does not enable SolidCAM to continue the tool path in a closed loop.
537
One way
The tool will retreat to the Clearance level and move to the start point of the next tool path, always keeping the cutting direction specified in the Milling type.
Zigzag
This option enables the tool to change the cutting direction when it encounters open contours on the model. The milling direction on open contours will change between climb and conventional milling until the open contour has been finished. With the Zigzag option, rapid moves from Z-level to Z-level will be greatly reduced. Constant Z flat floor machining Select the check box to activate this option. SolidCAM recognizes planar areas on 3D Models. For flat planar areas of the model, working areas will be automatically created that can be machined using a hatch or contour style pocket.
Flat floor machining
greatly reduces programming time of 3D models with 2.5D features like pockets and profiles on different Z-levels. Scallop Enter the scallop (cusp height) of the finished surface you want to achieve. SolidCAM will automatically calculate the side step of the tool.
Maximum step over If you use a flat tool or a bull nose cutter, the step over will be as large as the flat area of the tool, e.g. for a tool diameter 6 with a corner radius of 1, the step over on flat areas would be 4. To limit the cutting width of the tool, enter the maximum step over value.
538
7. 3D Milling
Minimum cut area This parameter defines the size of the minimum area that will be machined. Machining style SolidCAM enables you to choose two styles of the floor machining during Constant Z finishing:
Contour style
Select this option if you want to machine the flat floor areas on your model as a contour style pocket. The pocket tool path will travel at parallel offsets to the outside contour of the flat area. 1. Choose the Contour strategy. 2. Click on the Data button to define the Contour parameters. For more information on the Contour machining, see topic 6.4.3.
Hatch style
The tool mills the flat area in a linear pattern. 1. Choose the Hatch strategy. 2. Click on the Data button to define the Hatch parameters. For more information on the Hatch machining, see topic 6.4.3. With the Mode button, SolidCAM locates open pocket areas and enables you to machine them with a specific strategy. This strategy enables you to combine pocket and profile tool paths in order to provide the best productivity in open pocket machining. For more information on the Open Pocket machining, see topic 6.4.3. Arc approximation This command enables you to create G2/G3 GCode output from Constant Z operations. SolidCAM checks whether successive points of the calculated tool path can be connected using an arc or circle. If an arc or circle connection within the specified arc approximation tolerance can be made, you will receive arc and G2 and G3 circle interpolation commands in the generated GCode.
539
This feature can drastically reduce the number of lines in GCode files. Most CNCcontrollers and machines work much faster on arcs and circles than on single tool path points or splines. Arc approximation will increase actual feed rates on older CNCmachines and the machine will work smoother. Complete Z-Level This option enables you to define the order of the machining Z-levels. For more information on this subject, see topic 7.1.3. Vertical wall with fillets This option enables special handling of vertical walls with fillets between them in a prismatic part. For more information on this subject, see topic 7.1.3.
Tool path with the constant Step over along the surface generated by the Constant Step over strategy
540
7. 3D Milling
Constant Step over gives an excellent surface finish because the step over is constant along all surfaces irrespective of whether they are steep walls or shallow areas.
SolidCAM provides four types of the Constant Step over strategy: Profile with offset
Pocket Profile with limit Ruled surface Pocket-auto boundaries
The appropriate geometry has to be defined for all of these options. Profile with offset The tool mills from the geometry you have chosen to the Clear offset distance. Specify the Step over distance. Note that both Step over and are measured along the surface.
Step over Geometry Clear offset
Clear offset
The Tool side option defines the position of the tool relative to the geometry or, in other words, the side of the geometry where the tool path will be applied.
Tool path
541
Pocket The tool mills within the geometry until it has machined the entire pocket. The geometry used with this option must consist of several closed chains, similar to the geometry for a regular Pocket operation. SolidCAM defines a number of offsets to the geometry with the specified Step over (measured along the surface). If there is an island, the tool will mill evenly from the outside chain toward the island and from the island toward the outside chain. The two paths will join in the middle between the two chains. The shape of the tool path is determined by both the outside geometry and the island geometry.
Pocket geometry Tool path
SolidCAM enables you to define the cutting direction: The Start from option enables you to start machining either from Outside or Inside the pocket. The Direction option enables you to choose Conventional or Climb milling.
542
7. 3D Milling
Profile with limit This option enables you to create the tool path between two chains that can be open. The tool mills from the first chain toward the second chain copying the shape of the first chain along the surface being machined with specified Step over. Note that Step over is measured along the surface.
Chain #1
Chain #2
Ruled surface This option enables you to create the tool path between two chains that can be open. The tool mills from the first geometry towards the second geometry while morphing from the shape of the first geometry to the shape of the second geometry, with specified Step over.
Tool path Second chain
First chain
543
Pocket-auto boundaries When this option is chosen, SolidCAM automatically determines the pockets within the limits of the defined working area. Tool path connections
Direction type: Zigzag
The tool mills one line of the offset pattern and then moves directly to the next line and so on. It mills forward and backward without leaving the material, thus constantly switching between climb and conventional milling.
Direction type: One way
The tool mills one line of the linear pattern. At the end of the line, the tool rapidly moves (G0) to the safety distance and then to the start of the next cut line. The tool will always use climb or conventional milling.
Connection type
This option enables you to control the way the tool moves between two adjacent tool passes.
Stairs
The tool moves in two steps between two adjacent tool passes. If the next pass is lower than the present pass, the tool first moves away from the surface in the XY-direction and then downwards in Z. In case the next pass is higher than the present pass, the tool first moves upwards in Z and then approaches the surface in the XY-direction.
Smooth
Between two adjacent tool passes, the tool moves on the surface of the model. The line connecting the two adjacent tool passes is projected on the model. When you use the Smooth option, the tool does not leave material when moving to the start point of the next pass.
544
7. 3D Milling
Extend to edge When this check box is not selected, the tool path is generated from the position where the tool center is aligned with the end point of the face; this could leave an unmachined area. When this check box is selected, the tool path is extended till the tool is tangent to the face, at the start point of the face.
Unmachined area
545
This kind of functionality is particularly important for high speed machining because of the desire to maintain a relatively constant chip removal rate. Without Pencil milling, when finishing these parts with walls and floors, the tool would be removing a considerably larger volume of material when it reaches the corners. With Pencil milling, the corners are already relieved, causing less tool deflection and noise when cutting the corner. This is true whether machining in a downhill or uphill fashion. Since Pencil milling can clean out stock in corners, where the stock will typically be the heaviest, Pencil milling is often performed before various 3D finishing methods are run. The machine operator or NC programmer will typically reduce the feed rate of a pencil cut operation due to the increased material removal rate. It is recommended to use Pencil milling as a strategy for semi-finish. The Pencil milling dialog box enables you to define the parameters of the Pencil milling strategy. Bitangential angle The Bitangential angle is the complement to 180 of the corner angle. SolidCAM will machine all corners that have a Corner angle smaller than 180 Bitangential angle.
Corner angle
Bitangential angle
Direction mode
Standard
The tool mills the center line of Pencil milling from its start to its end in one movement.
546
7. 3D Milling
Upward
The tool will always mill from the lowest point of the center line of Pencil milling to the highest point. As the result the center line of pencil milling is divided into several segments with the tool moving rapidly from the end of one segment to the start of the next segment.
Segment #1
Segment #2
Downward
The tool will always mill from the highest point of the center line of Pencil milling to the lowest point. As a result the center line of pencil milling is divided into several segments with the tool moving rapidly from the end of one segment to the start of the next segment.
Segment #1
Segment #2
547
Offset SolidCAM machines at an offset from the center line of Pencil milling. The following data has to be defined: Step over defines the step over to the both sides from the center line of Pencil milling. Number of passes defines the number of offset passes.
Start from
Inside
SolidCAM machines the center line of Pencil milling and then the offset passes at each side.
Center line
3 2 1 4 5
Outside
SolidCAM machines the offset passes from each side at the center line and then the center line of Pencil milling.
Center line
1 2 5 4 3
548
7. 3D Milling
The precision tolerances defined on this page will directly affect the surface quality of your model.
3D Milling Tolerance
Facet tolerance
Facet tolerance This tolerance controls the maximum deviation of the mathematical representation from the original solids and surfaces of your model. The 3D Model geometry is triangulated and the resulting facets are saved in the <model_name>.fct file in the CAM-Part folder. The triangulation is performed on the 3D Model geometry when you use it for the first time in a 3D Milling operation. If you use a 3D geometry in another operation, SolidCAM checks the tolerance of the existing *.fct file of this geometry. It does not perform another triangulation as long as the *.fct file is created with the same surface tolerance.
549
SolidCAM generates the tool path in two steps: 1. SolidCAM generates a mathematical representation of the surfaces and solids of the 3D Model geometry within the given surface tolerance. The information about this triangulation process is stored in an internal *.fct file that is similar to an *.stl file. 2. SolidCAM calculates the tool path using the parameters specified for the tool and the milling strategy to calculate the single steps of the tool on the mathematical model created in the first step. The result of this calculation, the *.pj PCode file, later serves as input to the generation of the actual GCode file. During this calculation, SolidCAM uses the Tool path tolerance that affects the number of single steps in the tool path (accuracy of the tool path). The tool path tolerance can be defined by the following criteria: Tool curvature The accuracy of the tool path depends on the Tool diameter and the specified tolerance value. Surface curvature The accuracy of the tool path depends on the surface curvature and the specified tolerance value. Side step This tolerance enables you to control the size of a single step that will be constant during the whole tool path. Small tolerance values result in more GCode steps in the GCode file, but the resulting surface is closer to the mathematical model.
550
7. 3D Milling
When you click Add Operation, 3D Engraving, the 3D Engraving dialog box is displayed.
Engraving geometry name In this section, you have to specify the contour, i.e. profile geometry that you want to engrave on the 3D model surface. For more information on Profile geometry, see topic 4.4.1.
551
Fill area The area within the closed engraving geometry can be machined using the following strategies: Hatch SolidCAM fills the engraving geometry with a linear raster tool path, according to the specified Step over and Hatch angle. Contour The tool moves on offsets parallel to the pocket contour with the specified Step over. The contours are machined in the clockwise (CW) or counterclockwise (CCW) direction. The Wall offset parameter enables you to specify the offset from the engraving geometry. SolidCAM generates the contour equidistant to the engraving geometry at the specified offset. The engraving is performed inside this contour. Engraving technology Type This option enables you to semi-finish and/or finish the engraved profile on the translated surface. The Semi-finish option enables you to prepare the engraving profile to an offset specified in the Offset field with cutting depths defined in the Step down section. The Finish option enables you to machine the engraving profile to its final dimensions in one step down. The Both option is used to machine the limit first with a semi-finishing cut and then with a finishing cut.
Engraving geometry Step over
Hatch angle
552
7. 3D Milling
Side The tool can cut to the left of the profile, to the right of the profile, or directly on the engraving geometry. Right: the tool cuts to the right of the profile geometry up to a distance defined with the Offset value. Left: the tool cuts to the left of the profile geometry up to a distance defined with the Offset value. Center: the center of the tool moves directly on the profile geometry. Offset You can specify the offset from the engraving geometry for a Semi-finishing operation to the left or to the right of the geometry. This offset will be removed with the finishing cut, if you have defined one. Step down This value defines the successive Z-cutting depth during the Semi-finishing operation of the engraving profile.
From Upper level
Roughing passes are performed at each down step, from the Upper Level to the virtual surface located at an offset from the actual surface. This offset is defined with the Engraving depth value.
Upper level Actual surface Surface with offset dened as Engraving depth
553
From surface
Roughing passes are performed at each down step, only from an actual surface to a virtual surface defined with the Engraving depth value.
Geometry Actual surface Surface with offset dened as Engraving depth
3D Milling Tolerance
Facet tolerance
554
7. 3D Milling
When you change a MAC file for the CAM-Part which contains tapping operations for a MAC file which does not support tapping, SolidCAM marks all the tapping operations with the asterisk sign (the PCode is removed). When you try to calculate such operations, the following messages are displayed.
556
7. 3D Milling
Solid model
Sequence of drill positions This section enables you to define the sequence of the drill positions, manage its direction, etc. For more information, see topic 6.6.3.
557
Reverse drilling sequence SolidCAM enables you to reverse the sequence of drilling positions in 3D Drilling operations. This functionality enables you to optimize the rapid movements during the machining and increase the machining speed. The Reverse button reverses the sequence of drilling positions as shown. When the same sequence of drilling positions is used by several drilling operations (e.g. center drilling, drilling and threading) the sequence reversing enables you to reduce rapid movements between the operations. The Reverse option is enabled only when the drill_proc parameter is set to N in the MAC file. Show sorted This button displays the sorted sequence of drill positions on the solid model. Drill cycle type Click on the Drill cycle type button. The Drill canned cycles supported by the post-processor of the current CNC-controller are displayed. Click on one of the icons to select the canned cycle you want to use in this operation. For more information on Drill cycles, see topic 6.6.3.
1 3 5 6 2 4
Original sequence
4 3
2 1
Reversed sequence
558
Machining Processes
A Machining Process is comprised of a series of operations that are tied together through user-defined parameters. You can automate repetitive tasks in CNC-Programming with the Machining Process feature. In subsequent identical or similar situations, Machining Processes can be used directly or adapted to a new situation by giving values to their parameters.
Machining Processes Table Defining a new Machining Process Operation Templates Default Sets Parameters & Expressions Using Machining Processes
Operation Templates
Parameters
At this stage, preliminary centering is made for the hole and the chamfer.
Drilling
560
8. Machining Processes
Threading
expression.
D_chamfer D_thread
In the above example, the following parameters are required: The tap size (D_thread); The tap depth (H_thread); The drill depth (H_drill); The chamfer diameter (D_chamfer).
D_chamfer H_center
H_thread H_drill
H_center =
D_chamfer/2 tan(/2)
In the above example, you can define the following expression for centering depth:
Machining Process.
With a group of such operation templates, parameters and expressions, you can define the universal
561
Operation Templates
Machining Process
Machining Process N
562
8. Machining Processes
SolidCAM enables you to use three major interface tools for these tasks: New Machining Process Table in this dialog box, you can define a new MP Table. SolidCAM also enables you to manage existing MP Tables. For more information on this subject, see topic 8.3. Machining Process Table Manager enables you to create and manage a single Machining Process in the Table. For more information on this subject, see topic 8.4. Machining Process Define Manager enables you to define components of a single Machining Process: Operation Templates, Default sets, Parameters and Expressions. For more information on this subject, see topic 8.6.
563
2. Enter a name for the Machining Process Table in the Table name field. 3. Click on the Add MAC file button to define the MAC file for your Machining Process Table. Since not all machines support all of the options in SolidCAM, you must also give the MAC file that you will be using. This will assure that only the options that are supported by your machine will be used. 4. Confirm the Machining Process Table creation with the OK button.
1. Click on the Add button to choose the suitable MAC file from the list.
564
8. Machining Processes
2. In the dialog box displayed, pick the MAC file you wish to work with and click OK. The Add MAC file(s) dialog box is displayed again with the chosen MAC file.
Adding similar MAC files
This option adds to the list any MAC file similar to the one you have originally picked. The criterion of the similarity is the coincidence of the MAC file options required for Machining Processes.
565
This field contains the list of all Machining Processes from the current table. Double-click on the Machining Process name in the list to edit the MP in the Machining Process Define Manager (see topic 8.6).
Machining Processes (see
Right-click on the Machining Process name in the list to open the menu of Managing topic 8.5).
During the Machining Process definition SolidCAM enables you to divide the Machining Processes in the MP Table into groups. Each group name has to be started with the == symbols. All the Machining Processes following the group name (till the next group name) are included into the group. In the Add Machining Processes menu (see topic 8.8), each such group is displayed as a separate submenu.
MP Picture
This option enables you to attach a picture to your MP. Click on the Browse MP Pictures button and choose a bitmap file (*.bmp) in the browser window.
Type
For easier identification and classification of Machining Processes, you can define and use your own MP types.
Description
In this field, you can enter a text describing the Machining Processes.
566
8. Machining Processes
This option enables you to load the current MP Table in the Machining Process Table Manager (see topic 8.4).
New
With this option, you can create a new MP Table. SolidCAM enables you to create four types of MP Tables: Milling, Turning, Turn-Mill, and Wire Cut.
Open
This option enables you to load an MP Table via the standard Windows browser. 1. Right-click on the Machining Process header and choose Open from the submenu to load the Machining Process Table. The browser window is displayed. 2. Choose a Machining Process Table file (*.mpt).
567
The Machining Process Table is loaded and the Machining Process Table Manager is displayed.
Copy
This option enables you to copy the MP Table. The Copy Machining Process Table dialog box is displayed. 1. In the left field of the dialog box, choose an MP Table. 2. Click on the button to move the MP Table in the copy-container field. You can use the button to remove MP Tables. 3. Choose the copy location in the right field. 4. Click on the Copy button to confirm the operation. 5. Click on the Exit button to close the dialog box.
Delete
Choose this option to delete the MP Table via the standard Windows browser.
Recent MP Tables
This option displays a list of the last MP Tables you loaded in SolidCAM. You can open the file by clicking on the file you want to open.
568
8. Machining Processes
Group Types
This option enables you to create and manage your own list of expressions that will be available in each MP you design.
To add a new Group Type, click on the Add button and type the name.
To remove an existing Group Type from the list, select the item and click on the Delete button.
569
The Edit dialog box is displayed. Change the MP Group Type name and confirm it with the OK button.
You can use the F2 hotkey to open the Edit dialog box. By double-clicking on the Group Type name in the list, you can edit the name in the list directly without opening the Edit dialog box. Using Group Types The Machining Process Table Manager enables you to assign the Group Type to the Machining Process by choosing it from the list.
570
8. Machining Processes
This option enables you to add a new Machining Process to Machining Process Table.
Edit
This option enables you to edit the components of the Machining Process in the Machining Process Define Manager (see topic 8.6).
Copy
This option enables you to remove the current Machining Process from the Machining Process Table.
Import
This option enables you to insert Machining Processes from another MP Table into the current MP Table. You can insert Machining Processes from MP Tables defined with similar MAC files. 1. Right-click on the Machining Process name and choose Import from the menu. 2. Choose the MP Table you want from the Browser. The MP Export Table Manager is displayed. 3. Choose the Machining Process from the Manager and confirm with the Export button.
571
button. These
If a variable you entered does not exist, SolidCAM adds it to the Used Parameters Table (see topic 8.6.6). To edit this parametric field, you can use the parametric field menu by clicking on the button.
572
8. Machining Processes
If you entered incorrect data in the parametric field (unacceptable type of variable, error in expression, etc.), SolidCAM marks this parametric field with the button.
In the Operation template, the definition of the Geometry and the Tool is mandatory.
The process of the Operation Template creation is the same as creating operations via SolidCAM Manager. 1. Right-click on the Operations field situated in the Operation Templates tab.
2. Choose an Operation Template type from the menu. The corresponding Operation Template dialog box is displayed.
573
Edit
This option enables you to edit the Operation Template. The corresponding Operation Template dialog box is displayed.
Delete
Change Tool
This option enables you to change the tool used in the specific Operation Template. The Part Tool Table dialog box (see topic 3.6) is displayed.
Suppress/Unsuppress
SolidCAM enables you to suppress and unsuppress operation templates in the Machining Process. The rules for suppressing and unsuppressing of the operation templates are the same as for operations. The suppressed/unsuppressed status of an operation template is the property of the operation template per default set, i.e. the same operation template can have a different status in different default sets. SolidCAM inserts suppressed operation templates from the Machining Process into the CAM-Part as suppressed operations.
574
8. Machining Processes
User-defined parameters
This option displays a list of existing user-defined parameters. Choose the variable name from the list. You can open this list with the F5 hotkey when you are in the parametric field.
Part parameters
This option displays a list of existing part parameters. Choose the variable name from this list. You can open this list with the F6 hotkey when you are in the parametric field.
Expressions
You can open this list with the F7 hotkey when you are in the parametric field.
575
Functions
This option displays the list of standard SolidCAM functions (for more information on this subject, see topic 8.6.8). You can open this list with the F8 hotkey when you are in the parametric field.
Edit-View
In this dialog box, you can see and edit the full parameter name or expression string. 1. You can open this list with the F2 hotkey when you are in the parametric field. 2. In this dialog box, you can also use the operational menu by clicking on the button.
576
8. Machining Processes
You can create a number of Default Sets and assign the specific combination of values and expressions to the parameters in each of them. The Default Sets enable you to adapt the Machining Process to specific tasks. 1. Create a new Default Set with the Copy option. 2. Activate the created Default Set with the Current option. 3. Change parameters definition via Parameter Tables.
Parameters
There are two areas in the Machining Process Define Manager that enable you to manage your parameters and expressions: Used Parameters Table
This area shows the table of parameters that were used in the Operation Templates with the actual Default Set.
577
This table contains the following columns: Parameter - this column shows the parameter name. You can change the name of the parameter. In this case the name will be updated in all Operation Templates that use this parameter. Expression - this column shows the parameter definition as an expression or a value. To edit this parametric field, use theparametric field menu available by clicking on the button. Result value - this column shows the result value returned by the parameter. G - this column shows the status of the parameter. If the status is Global - the G letter is shown. In this case the expression of this value will be the same in all Default Sets. By right-clicking on this field, you can change the status of the parameter. R/O - this column shows the access status of the parameter. If the status is Read-only, the R/O letters are shown. In this case the parameter definition cannot be changed during Machining process insertion. By right-clicking on this field, you can change the read-only status of the parameter. Description - this column shows your own text description of the parameter. To edit the field, use the context menu available by clicking on the Unused Parameters Table button.
This area shows the table of parameters that were not used in the Operation Templates with the actual Default Set. This table contains the following columns: Parameter - this column shows the parameter name. In this field you can change the name of the parameter. In this case the name will be updated in all Operation Templates that use this parameter. Expression - this column shows the parameter definition as either expressions or values. To edit this parametric field, you can use theoperational menu available by clicking on the button. Result value - this column shows the result value returned by the parameter.
578
8. Machining Processes
579
Limit Geometry variables are available for the Working Area definition in 3D Milling Operation Templates. 3D Model Geometry variables Section Geometry
Templates.
Drill Geometry
variables are available for Drilling Operation Templates. variables are available for Pocket Operation Templates.
Pocket Geometry
Z
Z-Value variables enable you to store the Z-coordinates. The value of a variable of this type can be defined by picking on the solid model; the Z-coordinate of the picked position is used as the variable value.
variables enable you to store the distance. The distance can be defined by picking two positions on the solid model.
Distance Value String variables Float variables
are used to store positive and negative floating point numbers. are used to store positive and negative whole numbers.
variables are used to store the positive whole numbers used for the tool number definition.
Diameter variables enable you to store the diameters. The diameter value can be defined
Enter the names for variables according to the following rules: Use a letter as the first character; Only capital and lowercase English letters, numbers and the underscore symbol (_) are acceptable; Names cannot exceed 255 characters in length.
580
8. Machining Processes
Expressions SolidCAM enables you to use expressions for parameters definition. You can use the following symbols in expressions: Addition (+) Subtraction (-) Multiplication (*) Division (/) Parentheses are acceptable. When multiplication and division occur together in an expression, each operation is evaluated as it occurs from left to right. When addition and subtraction occur together in an expression, each operation is evaluated in the order of appearance from left to right. Parentheses can be used to override the order of precedence and force some parts of an expression to be evaluated before others. Operations within parentheses are always performed before those outside. Within the parentheses, however, operator precedence is maintained. SolidCAM enables you to use the set of the standard mathematical functions such as sine, cosine, etc. in your formulas. Example: For the H_center variable in the following formula
H_center = D_chamfer/2 tan(/2)
581
Returns a value of the same type that is passed to it specifying the absolute value of a number. The absolute value of a number is its unsigned magnitude. For example, and abs(1) both return 1.
abs(-1) acos()
Returns a value specifying the arctangent of quotient first and second arguments.
dist(,) and ang(,)
Returns polar coordinates: distance and angle (in radians) of the point defined in Cartesian coordinates.
582
8. Machining Processes
pow(,)
Returns a value of the first argument raised to the power of the second argument. For example: pow(2,3) returns 8.
log10()
583
The Tool number field becomes available for parametric definition. All other tool parameters are disabled.
584
8. Machining Processes
You can switch back to the method where the Tool number is assigned automatically by rightclicking on the tool name in the list and choosing Used in MP.
When you insert the MP into the CAM-Part, you have to assign values for the tool parameters that were defined as variables in the MP. If the tool was defined with the Used in Current or Part Table option, SolidCAM automatically checks the existence of the tool with the specified number in the Part Tool table and Current Tool table; if a tool with this number is not found, the number is not acceptable. The parametric menu available for the tool number variables contains three options:
Choose tool from current table
This option displays the Current Tool Library from which you can choose a tool for the MP insertion. When you have selected a tool, its tool number from the Current Tool table appears in the Expression field of the relevant variable. This option is available only when the Current Tool Library is defined.
Tool select from part
This option displays the Part Tool table from which you can choose a tool for the MP insertion. When you have selected a tool, its number from the Part Tool table appears in the Expression field of the relevant variable.
Edit View
This option displays the Edit dialog box in which you can enter the expression manually.
585
Insertion
Machining Process
CAM-Part
Operation Templates
Operations
586
8. Machining Processes
587
The From MP Table command enables you to choose the Machining Process to insert from the Machining Process Table Manager dialog box.
The Machining Process Table Manager is displayed. Choose a Machining Process from the list. Click on the Pick button. The Machining Process Insert Manager is displayed. While the Insert Manager is loading, SolidCAM receives necessary information from the CAM-Part. Then SolidCAM receives expressions for other parameters from the current Default Set and calculates them. To prepare the Machining Process for insertion, do the following: 1. On the Default Sets page, choose the required Default Set. 2. With the Parameters Table, fill all the blank expression fields. You can also change all expressions that do not have Read-Only status. 3. When the Machining Process is defined, click on the Insert button to insert the Machining Process into the current CAM-Part. 4. SolidCAM chooses tools for the Machining Process.
588
8. Machining Processes
To undo the last insertion, use the Undo button. The Simulate button enables you to simulate operations of the current CAM-Part.
589
By clicking on the (+) sign near each Operation Template, you can see the list of parameters used in the selected Operation template.
590
8. Machining Processes
To see the Operation Template parameters and settings, right-click on the Operation Template name in the list and choose the Show command from the list. The Operation Template dialog box will be displayed.
In this dialog box you cannot edit the Operation Template definition. To edit the Operation Template, go to the Machining Process Define Manager (see topic 8.6). In the Operation Template screen, all parametric fields are marked with button. Click on this button to see the parametric field menu. The Edit-View option is available in this menu. This option opens the parameter edit dialog box. the
This dialog box enables you to see and edit the full parameter name or expression string.
591
This option displays a list of geometries of a suitable type that is defined in the CAM-Part. Choose the variable name from the list. You can also open this list with the F5 hotkey when you are in the parametric field.
592
8. Machining Processes
Geom Define
This option enables you to define a geometry from the current model. You can also open this list with the F6 hotkey when you are in the parametric field.
Geom Show
The current 3D model, drill or chain geometry will be displayed in the SolidWorks window. To exit from this mode, use the Geometry dialog box. button in the Show
You can also open this list with the F7 hotkey when you are in the parametric field.
Edit-View
This dialog box enables you to see and edit the full parameter name or expression string. 1. You can also open this list with the F2 hotkey when you are in the parametric field. 2. In this dialog box, you can also use the operational menu by clicking on the button.
Parameters of Z-value and Distance types For parameters of these types, SolidCAM enables you to define values by picking them from the active CAD model.
593
To define the Z-value, choose the Pick Z-value (F5) item from the parametric menu.
The Pick Z-Value dialog box will be displayed. Pick the point on the model and click on the OK button to confirm the selection.
To define the Distance, choose the Pick Distance (F5) item from the Parametric menu.
1. In the SolidWorks window, pick the first point. 2. Confirm the selection with the OK button in the Distance: Pick first point dialog box. 3. Pick the second point and confirm it in the same way. The Distance value will be calculated. Other Parameters For parameters of other types, the parametric field menu contains only one item: Edit-View (F2).
594
The SolidCAM Automatic Holes Feature Recognition and Machining (AFRM) module enables you to automatically recognize holes in the Solid model and generate the tool path for machining.
Hole Feature recognition Preparing to machining Feature Sets definition Technology Technology Database
Tool path
Technology Database
CAM-Part
596
All the holes recognized by SolidCAM can be classified as Simple Hole Features or Compound Hole Features. A Simple Hole Feature is a cut in the solid body generated by the figure of revolution. The diameter of a Simple Hole can be constant or changing. A Simple Hole can be Blind or Through.
A Compound Hole Feature is also generated by the cut of the figure of revolution. The diameter of the Compound Hole Feature is constant or decreasing at the start of the hole and increasing at the end of the hole. The Compound Hole Feature can be only through.
SolidCAM recognizes Disconnected Hole Features containing a number of broken holes consisting of coaxial and coradial segments divided by the model elements.
597
598
The Holes Recognition is started. SolidCAM parses the solid model in order to gather the information about all holes. When the recognition process is finished, SolidCAM displays the Holes Recognition Manager.
599
Hole Features page Machinable Features page Feature Sets page Operations page Technology page
This toolbar enables you to switch between the pages of the HR Manager.
600
Hole Features page (see topic 9.5.11) displays all the Hole Features recognized in the solid model. Machinable Hole Features page (see topic 9.6.6) displays all Machinable Hole Features converted from the Hole Features. Feature Sets page (see topic 9.7.4) displays all the Feature Sets. Technology page (see topic 9.8.3) displays all the Technological solutions offered by SolidCAM for the machining of the current Feature Set.
Technology page
Operations page
Technology Database
This button enables you to display the Technology Database Manager (see topic 9.10).
Settings
This button enables you to display the Holes Recognition Settings dialog box (see topic 9.11).
601
Show Picture
This button enables you to display the schematic picture of the selected item.
Show Data
This button enables you to display the Parameters dialog box that displays the parameters of the selected item.
Show Errors
This button enables you to display the Errors dialog box that shows the errors that occurred during the AFRM process.
Show Tool Table
602
SolidCAM recognizes holes with thread created by SolidWorks Hole Wizard. The thread is an optional property of the Cylindrical Hole Feature segment. SolidCAM determines the total Depth, Hole Upper Plane and Direction of each Hole Feature. SolidCAM determines the geometry parameters of each Hole Feature segment. The Upper plane of the Hole Feature is the upper Z-level of the hole determined in compliance with the SolidWorks Part origin.
Z Direction Hole Upper Plane Solid Model Origin
Depth
603
Diameter (D1)
The thread is an optional property of the Cylindrical Hole Feature segment. The Cylindrical segment that has a thread is marked with a specific Thread flag. SolidCAM determines a number of parameters of the thread hole:
Segment diameter Segment height Thread diameter Thread depth Thread pitch Thread Upper level Thread depth
Thread depth Thread Height Thread Diameter Hole Feature Upper level Thread Upper Level = Segment Upper Level
Segment Height
Segment Diameter
604
Height (H1)
There are two parameters describing the location of the center of the generatrix circle:
Radius (R1) Height of the center (HC)
Torus segments
605
The Sphere segment can be either Open or Closed. A Closed Sphere segment has zero Lower Diameter (D2). When the Lower Diameter (D2) is greater than zero the Sphere will be Open.
Splitter
Splitter
606
Lower Cylinder
The Reaming Diameter and Reaming Height parameters are determined as shown below.
Reaming Depth
Reaming Height
For each Hole Feature Shape, the Hole Features are grouped in Shape Hole Feature Groups; each Group includes the Hole Features with the same values for the segment parameters.
Group #1 Hole #1 Hole #2 ... Hole #N Group #2 Hole #1 Hole #2 ... Hole #N
...
Group #N
The Hole Features page displays the list of all Hole Features recognized in the solid model. The Hole Features are classified into Shapes and Groups. You can highlight the Hole Features, Groups and Shapes in the graphic view by selecting the items in the list. You can repeat the Holes recognition process with the Recognize command. SolidCAM enables you to display the Hole Picture dialog box with the button located on the Holes Recognition toolbar. This dialog box shows the schematic picture of the selected Shape, Group or Hole Feature.
Show Picture
SolidCAM enables you to display the Hole Feature Parameters dialog box with the Show Data button located on the Holes Recognition toolbar.
608
This dialog box contains a number of pages. The Holes parameters page displays the global Hole parameters:
Depth Upper Plane Direction
Other pages display the geometry and color parameters of each Hole Feature segment. When the specific segment page is selected in the Hole Feature Parameters dialog box, the corresponding segment is highlighted in the Hole Picture. The parameters values displayed in the Hole Feature Parameters dialog box cannot be changed. In order to change them, you have to edit the solid model and perform the Holes Recognition again. Managing Hole Features SolidCAM enables you to manage the Hole Features, Shapes and Groups with the right-click menu. Shape or Group menu The right-click menu for Shape and Group includes the following items:
Split/Unsplit
This option enables you to split/unsplit all Compound Holes in the selected Shape or Group. This option is available only if the Shape or Group contains only Compound Holes.
Change direction to opposite
This option changes the direction of all Hole features in the specified Shape or Group.
609
Connect
This option enables you to connect appropriate broken segments into one single Connected Hole Feature (see topic 9.11.1).
Disconnect
This option enables you to divide a Connected Hole Feature into separate segments (see topic 9.11.1).
Divide/Join hole segment
This option enables you to machine cylindrical through holes with depth significantly greater than a normal cutting length of a tool. Such holes are divided into two halves so that they can be approached by the tool from both sides and machined with an overlap of 10% from the entire hole depth.
Overlap
Divided holes can be joined. Hole Feature menu The right-click menu for Hole Features includes the following items:
Split/Unsplit
This option enables you to split/unsplit the selected Compound Hole. This option is available only for Compound Holes.
610
This option enables you to connect appropriate broken segments into one single Connected Hole Feature (see topic 9.11.1).
Disconnect
This option enables you to disconnect a Connected Hole Feature into separate segments (see topic 9.11.1).
Divide/Join hole segment
This option enables you to machine cylindrical through holes with depth significantly greater than a normal cutting length of a tool. Such holes are divided into two halves so that they can be approached by the tool from both sides and machined with an overlap of 10% from the entire hole depth. Divided holes can be joined.
Go to Opposite
This option enables you to jump in the list to the opposite part of the Split Compound Hole. This option is available only for Split Compound Holes.
Hole Features filter The filter capabilities enable you to display in the list only those Hole Features that correspond to a certain criterion.
Direction filter
This filter enables you to display Hole Features with a specified direction only.
Upper level filter
This filter enables you to display Hole Features with a specified Upper Level only. The Upper Level filter is active only for the specified direction.
611
This filter enables you to display Hole Features of a specified type: either Blind or Through.
Compound hole only
This option enables you to display only the Hole Features with undercut.
Connected holes only
This option enables you to show/hide the Connected Hole Features (see topic 9.11.1).
Divided holes only
612
SolidCAM determines the Undercut Height (HU) as the sum of the height of all topology segments of the undercut. SolidCAM classifies undercuts depending on the last Hole Feature segment included in undercut. The classification is as follows:
Undercut None
In this case the finish diameter of the last segment of the undercut is equal to the Undercut diameter.
Undercut Planar
In this case Undercut finishes with the Planar Hole Feature segment (see topic 9.5.4).
Undercut Cone
In this case Undercut finishes with the Cone Hole Feature segment (see topic 9.5.2).
613
Undercut Chamfer
In this case Undercut finishes with the Chamfer Hole topic 9.5.3).
Undercut Torus
In this case Undercut finishes with the Torus Hole topic 9.5.5).
Undercut Sphere
In this case Undercut finishes with the Sphere Hole Feature segment (see topic 9.5.6).
Height (H1)
DU
Diameter (D1)
614
Undercut Cone
segment substitution
DU
Diameter (D1)
HU
Height (H1)
segment substitution
DU
Diameter (D1)
Angle (A1)
615
Undercut Torus
segment substitution
DU Diameter (D1)
Height (H1)
Height (H2) R
DT UPPER DU DCENTER
R R
H2=HC-H
HC
H2
Undercut Sphere
DU
segment substitution.
Diameter (D1)
HU HS
Height (H1)
616
Planar 1
United Planar
Planar 2
Cylinder + Cylinder
The diameter of the resulting cylinder will be the same as the diameter of the original cylinders. The Height will be the sum of the original cylinder heights.
Cylinder 1 United Cylinder
Cylinder 2
Chamfer + Cone
The Diameter of the resulting cone will be the same as the Diameter of the original upper chamfer. The Angle of the resulting segment is equal to the Angle of the original cones. The Height will be the sum of the original cone heights.
Chamfer United Cone
Cone
617
Chamfer + Chamfer
Chamfer 1
United Chamfer
Chamfer 2
The Upper Diameter of the resulting chamfer segment will be the same as the Upper Diameter of the original upper chamfer. The Angle of the resulting segment is equal to the Angle of the original chamfers. The Lower Diameter of the resulting chamfer segment will be the same as the Lower Diameter of the original lower chamfer. The Height will be the sum of the original chamfer heights.
Torus + Torus
Torus 1
United Torus
Torus 2
The Upper Diameter of the resulting torus segment will be the same as the Upper Diameter of the original upper torus. The Radius of the resulting segment is equal to the Radius of the original torus. The Lower Diameter of the resulting torus segment will be the same as the Lower Diameter of the original lower torus. The Height will be the sum of the original torus heights.
Sphere + Sphere
Sphere 1
United Sphere
Sphere 2
The Upper Diameter of the resulting sphere segment will be the same as the Upper Diameter of the original upper sphere. The Radius of the resulting segment is equal to the Radius of the original spheres. The Lower Diameter of the resulting sphere segment will be the same as the Lower Diameter of the original lower sphere. The Height will be the sum of the original sphere heights.
618
Chamfer
Flat Cylinder
Flat Chamfer
Thread
Reaming
Parameters of Machinable Hole Feature segments SolidCAM calculates the values of various parameters for the Machinable Hole Feature segments. These parameters are called HR variables. They will be used later for the technology definition.
619
Each Machinable Hole Feature segment has the following geometric and visual parameters:
hr_segm_upper_plane
This parameter is the distance from the Solid Model Origin to the upper level of the Machinable Hole Feature segment (Segment Upper plane).
hr_segm_depth
This parameter is the distance from the Hole Upper Plane to the lower point of the Machinable Hole Feature segment.
hr_segm_height
This parameter is the Height of the segment; the distance from the Segment Upper plane to the lower point of the Machinable Hole Feature segment.
hr_segm_color
This parameter defines the variable that can participate in the conditions defined in the Technology Database in order to choose the necessary technological solution. During the conversion of Hole Feature segments into Machinable Hole Feature segments, the RGB color of holes is converted into a number of the Float type and assigned to this variable. In addition to the general parameters, SolidCAM determines the following parameters for each type of Machinable Hole Feature segment:
620
Drill
hr_segm_diameter
hr_segm_height
hr_segm_angle
Chamfer
hr_segm_angle
hr_segm_diameter hr_segm_angle
hr_segm_diameter
hr_segm_lower_diameter
hr_segm_height
hr_segm_lower_diameter
621
Flat Cylinder
hr_segm_diameter
hr_segm_diameter
hr_segm_blind
hr_prev_segm_diameter
hr_segm_height
hr_segm_blind = true
hr_segm_diameter
hr_segm_height
622
Flat Chamfer
hr_segm_angle
hr_segm_diameter hr_segm_angle
hr_segm_diameter
hr_segm_height hr_segm_lower_diameter
hr_segm_height
hr_segm_blind hr_prev_segm_diameter
hr_segm_diameter
Thread
Thread Upper level
hr_segm_upper_plane
hr_segm_diameter
hr_segm_depth hr_segm_height
height)
623
Reaming
hr_segm_upper_plane
hr_segm_depth hr_segm_height
For the Machinable Hole Feature segments containing cylinder (Drill and Flat Cylinder), the Hole Upper Plane is coincident with the Segment Upper Plane. Therefore, the hr_segm_height is equal to the hr_segm_depth.
hr_segm_height = hr_segm_depth
624
When a pair consists of Cylinder and Planar segments are converted into Flat Cylinder segment.
Machinable Hole Feature segment
Cylinder + None
Drill
Cylinder + Chamfer
Drill
Cylinder + Cone
Drill
625
Drill
Cylinder + Sphere
Drill
Cone
Drill
Closed Sphere
Drill
626
3. All possible combinations with Lower segment Planar are converted into one Machinable Hole Feature segment.
Upper + Lower Hole Feature Segments Machinable Hole Feature segment
Cylinder + Planar
Flat Cylinder
Chamfer + Planar
Flat Chamfer
Flat Chamfer
4. Single segments like Torus, Chamfer and Open Sphere are converted into Chamfer Machinable Hole Feature segments.
Hole Feature segment Machinable Hole Feature segment
Chamfer
Chamfer
Torus
Chamfer
Open Sphere
Chamfer
627
Conversion to Drill Machinable Hole Feature segment SolidCAM determines the following dimensions of the upper and lower Hole Feature segments of the pair. In the scheme below, the segments are represented as two cylinders surrounding the segments.
Hole Upper Plane
Upper Plane D
Depth
Upper Segment
HU H
Lower Segment
HL
The scheme of the Drill segment generation is the following: The vertex of the cone is located on the same depth (hr_segm_height) as the lower point of the lower segment of the initial Hole Feature. The diameter of the Cylinder (hr_segm_diameter) is the same as the diameter of the Hole Feature Segment. The resulting Machinable Hole Feature segment is extended upward till the Hole Upper Plane. The Cone angle (hr_segm_angle) is 118. In some cases, according to the General conversion rules described earlier, the upper segment is absent. In this case the upper segment will be None and the segment Height will be 0.
Hole Upper Plane
hr_segm_height
hr_segm_diameter
hr_segm_angle
628
hr_segm_height
hr_segm_angle
D
hr_segm_diameter
Conversion to Flat Cylinder Machinable Hole Feature segment SolidCAM determines the following dimensions of the upper and lower Hole Feature segments of the pair. In the scheme below, the segments are represented as two cylinders surrounding the segments. If the lower Hole feature segment is Planar, the HL is 0. The scheme of Flat Cylinder Machinable Hole Feature generation is the following: The planar face is located on the same depth (hr_segm_diameter) as the lower point of the lower segment of the initial Hole Feature. The diameter of the Cylinder (hr_segm_height) is the same as the diameter of the Hole Feature Segment. The resulting segment is extended upward till the Hole Upper Plane.
Hole Upper Plane
Upper Plane D
Depth
Upper Segment
U H
Lower Segment
HL
hr_segm_height
hr_segm_diameter
629
Conversion to Chamfer Machinable Hole Feature segment According to the General conversion rules explained earlier, the scheme of input data for the conversion will be the following. The major parameters of the converted Chamfer Machinable Hole Feature segment will be the same as in the original Hole Feature segment: The Upper diameter (hr_segm_diameter) of the Chamfer segment will be equal to the Upper diameter of the initial Hole Feature segment.
Hole Upper Plane
The Lower diameter (hr_segm_lower_diameter) of the Chamfer segment will be equal to the Lower diameter of the initial Hole Feature segment. The Height (hr_segm_height) of the Chamfer segment will be equal to the Height of the initial Hole Feature segment. The converted Chamfer segment is situated at the same depth as the original Hole Feature segment. The Chamfer Angle (hr_segm_angle) will be calculated automatically.
Hole Upper Plane
hr_segm_height
Conversion to Flat Chamfer Machinable Hole Feature segment According to the General conversion rules explained earlier, the scheme of the input data for the conversion will be the following.
Hole Upper Plane
DU Lower Segment DL H
630
The major parameters of the converted Flat Chamfer Machinable Hole Feature segment will be the same as in the original Hole Feature segment:
Hole Upper Plane
hr_segm_height
The Upper diameter (hr_segm_diameter) of the Chamfer segment will be equal to the Upper diameter of the initial Hole Feature segment. The Lower diameter (hr_segm_lower_diameter) of the Chamfer segment will be equal to the Lower diameter of the initial Hole Feature segment. The Height (hr_segm_height) of the Chamfer segment will be equal to the Height of the initial Hole Feature segment. The converted Chamfer segment is situated at the same depth as the original Hole Feature segment. The Chamfer Angle (hr_segm_angle) will be calculated automatically. Conversion to Thread Machinable Hole Feature segment At the first stage, SolidCAM converts the Cylindrical Hole Feature segment into Drill/Flat Cylinder segment according to SolidCAM conversion rules. After that, the separate Thread MHF segment is created with the following parameters:
hr_segm_diameter = Thread Diameter hr_segm_height = Thread Height hr_thread_pitch = Thread Pitch hr_segm_upper_plane = Thread Upper level hr_segm_depth = Thread Depth
631
hr_segm_upper_plane
hr_segm_diameter
Thread Depth
hr_segm_depth
Thread Height
hr_segm_height
Thread Diameter
hr_segm_diameter
Reaming Depth
hr_segm_depth
Reaming Height
hr_segm_height
Drill Diameter
Reaming Diameter
632
SolidCAM enables you to display the Hole Picture dialog box with the Show Picture button located on the Holes Recognition toolbar. This dialog box schematically shows the segments of the selected Machinable Hole feature.
Managing Machinable Hole Feature Segments The lower part of the Machinable Hole Features page displays the list of the segments for the selected Machinable Hole Feature. The Machinable Hole Feature segments are situated in the list with specific order from the lower segment to upper. The Thread MHF Segment is the last segment. SolidCAM enables you to manage the Machinable Features segments with the right-click menu. The following operations are available:
Change type
The Change type option enables you to change the type of the Machinable Feature Segment. The M-Feature segment type dialog box will be displayed. This dialog box enables you to change the type of the Machinable Hole Feature segment.
633
Reset
SolidCAM enables you to change the dimensions of the Machinable Hole Feature segment. The Reset option enables you to reset the selected changed Machinable Hole Feature segment to its initial dimensions calculated by SolidCAM.
Insert Before/Insert After
This option enables you to insert a new Machinable Hole Feature segment before or after the selected segment. The M-Feature segment type dialog box will be displayed in order to choose the type of the segment.
Insert Thread
This command adds a user-defined Thread segment. This command is available only for Drill and Flat Cylinder Machinable Hole Feature segments.
Insert Reaming
This command adds a user-defined Reaming segment. This command is available only for Drill and Flat Cylinder Machinable Hole Feature segments.
Delete
This option enables you to delete a selected Machinable Hole Feature segment. Only the segments added by the user can be deleted. The segments automatically built by SolidCAM cannot be deleted, except for the Thread segment. Modifying Machinable Hole Feature segments SolidCAM enables you to display the Machinable Hole Feature Parameters dialog box with the Show Data button located on the Holes Recognition toolbar. This dialog box displays the parameters of the selected or selected Machinable Hole
The Holes parameters page is displayed when the Machinable Hole Feature is selected. This page displays the following parameters of the Machinable Hole feature:
634
Depth
The Depth, Upper Plane, Origin X/Y and Direction parameters cannot be changed. When a segment is selected, the Machinable Hole Feature dialog box displays the specific parameters of the selected segment. SolidCAM enables you to assign a new value (User value) to parameters of the Machinable Hole Feature segments. When the new value is assigned to the parameter, SolidCAM modifies the segment according to the specific rules. Modifying Drill Machinable Hole Feature segment
hr_segm_diameter
Parameters
hr_segm_height
hr_segm_angle
635
Changing Diameter (hr_segm_diameter) When the Diameter changes, the Height (hr_segm_height) and Angle (hr_segm_angle) remain unchanged. The height of the conical and cylindrical faces will be changed. The Cone corner will be fixed.
Changing Angle (hr_segm_angle) When the Angle changes, the Height (hr_segm_height) and Diameter (hr_segm_diameter) remains unchanged. The height of the conical and cylindrical faces will be changed. The Cone corner will be fixed.
Changing Height (hr_segm_height) When the Height changes, the Diameter (hr_segm_diameter) remains unchanged. The Height of the Conical face will be the same; the height of the cylindrical face will be changed. So, the Height will be changed. The Upper plane will be fixed.
Changing Upper Plane When the Upper Plane changes, the Diameter (hr_segm_ diameter) will remain unchanged. The Height of the Conical face will be the same; the height of the cylindrical face will be changed. So, the Height (hr_segm_height) will be changed. The Cone corner will be fixed.
636
hr_segm_height
Changing Diameter (hr_segm_diameter) When the Diameter changes, the Height (hr_segm_height) will remain unchanged. The Upper plane will be fixed.
Changing Height (hr_segm_height) When the Height changes, the Diameter (hr_segm_diameter) will remain unchanged. The Upper plane will be fixed.
Changing Upper Plane When the Upper plane changes, the Diameter (hr_segm_ diameter) will remain unchanged. The lower edge of the cylinder will be fixed. The Height (hr_segm_height) will be changed.
637
hr_segm_height hr_segm_lower_diameter
Changing Diameter (hr_segm_diameter) or Lower Diameter (hr_segm_lower_diameter) When the Diameter or Lower Diameter changes; the Angle (hr_segm_angle) parameter will remain unchanged. It means that the second diameter will also be changed. The Height (hr_segm_height) and Upper plane will be the same. Changing Angle (hr_segm_angle)
hr_segm_diameter) to change. The Lower Diameter (hr_segm_lower_diameter) will be fixed. The
Height
Changing
the
Angle
causes
the
Diameter
Changing Height (hr_segm_height) Changing the Height (hr_segm_height) causes the Lower Diameter (hr_segm_lower_diameter) to change. The Diameter (hr_segm_diameter) will be fixed. The Upper Plane and Angle (hr_segm_angle) will be unchanged. Changing Upper Plane Changing the Upper Plane causes the Diameter (hr_segm_diameter) to change. The Angle (hr_segm_angle) will be unchanged. The Lower Diameter (hr_segm_lower_diameter) will be fixed. So, Height (hr_segm_height) will be changed.
638
hr_segm_height hr_segm_lower_diameter
Changing Diameter (hr_segm_diameter) or Lower Diameter (hr_segm_lower_diameter) When the Diameter or Lower Diameter changes; the Angle (hr_segm_angle) parameter will remain unchanged. It means that the second diameter will also be changed. The Height (hr_segm_height) and Upper plane will be the same. Changing Angle (hr_segm_angle) Changing the Angle causes the Diameter (hr_segm_ diameter) to change. The Lower Diameter (hr_ segm_lower_diameter) will be fixed. The Height and Upper Plane will stay the same. Changing Height (hr_segm_height) Changing the Height (hr_segm_ height) causes the Lower Diameter (hr_segm_lower_diameter) to change. The Diameter (hr_segm_diameter) will be fixed. The Upper Plane and Angle (hr_segm_angle) will be unchanged. Changing Upper Plane Changing the Upper Plane causes the Diameter (hr_segm_diameter) to change. The Angle (hr_segm_angle) will be unchanged. The Lower (hr_segm_lower_diameter) will Diameter be fixed. So, Height (hr_segm_height) will be changed.
639
hr_segm_diameter
hr_segm_depth hr_segm_height
Changing Diameter (hr_segm_diameter) When the Diameter changes, the Height (hr_segm_height) remains unchanged. Changing Thread Upper level (hr_segm_upper_level) Changing the Thread Upper level (hr_segm_upper_level) causes the Thread Depth (hr_segm_depth) to change. The Thread Height (hr_segm_height) is unchanged.
Changing Thread Height (hr_segm_height) Changing the Thread Height (hr_segm_height) causes the Thread Depth (hr_segm_depth) to change. The Thread Upper level (hr_segm_upper_level) is unchanged.
Changing Thread Depth (hr_segm_depth) the Thread Depth (hr_segm_ depth) causes the Thread Upper level (hr_segm_upper_level) to change. The Thread height (hr_ segm_height) is unchanged. Changing
640
hr_segm_diameter
hr_segm_depth hr_segm_height
Changing Reaming Upper level (hr_segm_upper_level) Changing the Reaming Upper level (hr_segm_upper_level) causes the Reaming Depth (hr_segm_depth) to change. The Reaming Height (hr_segm_height) is unchanged. Changing Reaming Height (hr_segm_height) Changing the Reaming Height (hr_segm_height) causes the Reaming Depth (hr_segm_depth) to change. The Reaming Upper level (hr_segm_upper_level) is unchanged.
Changing Reaming Height (hr_segm_height) Changing the Reaming Depth (hr_segm_depth) causes the Reaming Upper level (hr_segm_upper_level) to change. The Reaming height (hr_segm_height) is unchanged.
Changing Diameter (hr_segm_diameter) The Diameter (hr_segm_diameter) parameter can be changed without any limitations. The Drill diameter (hr_prev_segm_diameter) parameter cannot be changed for the Reaming segment; to change the value you have to edit the Drill/Flat Cylinder segment on which the Reaming is performed.
641
Machinable Hole Features that will be machined within the same setup using one Coordinate System. Once used in a Feature Set, the CoordSys cannot be used in another Feature Set.
...
Feature Set CoordSys #N
Holes Bank
Recognized Holes Incompatible Holes
Compatibility Checker
Axis type Compatible Holes Axis type
Compatibility Checker
Compatible Holes Axis type
Compatibility Checker
Compatible Holes
Feature Set #1
Feature Set #2
Machine CoordSys #2
Feature Set #N
Machine CoordSys #1
Machine CoordSys #N
CAM-Part
642
SolidCAM checks the compatibility of the Machinable Hole Features with the Feature Sets and assigns Holes to the Feature Sets. The compatibility checker examines each Machinable Hole Feature according to the CoordSys (owned by the specific Feature Set) and the Axis type of the Feature Set.
Axis type
enables you to limit the number of the axes used for the machining of the Machinable Hole Features in Feature Set; the Axis number can be the same or smaller than Axis number of the CAM-Part. The Machinable Hole Features included in the Feature Set will be machined according to this Axis number, not considering the Axis number of the CAM-Part. Each Machinable Hole Feature can be assigned to a specific Feature Set if one of the following conditions is kept: The direction of the Machinable Hole Feature is parallel to the Z-axis of the Coordinate System; It is possible to define a CoordSys position (according to the Axis Type) under the Machine Coordinate System with the Z-axis parallel to the direction of the Machinable Hole Feature.
The order of the assignment depends on the Machine CoordSys Number; the Feature Set with the smaller Machine CoordSys number will be filled with Machinable Hole Features first. Thus, if the Machinable Hole Feature is compatible to a number of Feature Sets, the Machinable Hole Feature will be assigned to the Feature Set using the Machine CoordSys with the lowest number. The Machinable Hole Features that were not assigned are stored in the bank of the Recognized Hole Features.
Axis type
Machine CoordSys
Direction
CoordSys Position
643
The Z-axis of the defined CoordSys Position is coincident with the Machinable Hole Feature direction. The direction of the X- and Y-axis is defined according to the Machine CoordSys and Axis Type. When the Machinable Hole Feature is accepted by the Compatibility Checker, SolidCAM compares the direction of the Machinable Hole Feature with the Z-axis of the existing CoordSys Positions related to the Machine CoordSys of the Feature Set. If the direction and Z-axis of the CoordSys Position are parallel, the Hole Feature will be assigned to the CoordSys Position. If a suitable position is not found, SolidCAM defines a new one. SolidCAM enables you to automatically locate the origin of the created CoordSys position in dependence of the Hole Recognition Settings. The origin of the CoordSys position can be placed in the following locations: The CoordSys position is placed in the position of Machine CoordSys #1.
The CoordSys position can be placed in the corner of the model box.
SolidCAM calculates the box surrounding the model (model box) in the coordinate system of the first Machine CoordSys. The CoordSys Position will be located in the corner of the model box with the following coordinates (XMIN, YMIN, ZMAX).
644
The upper area displays the tree of the Feature Sets with their Hole Features. The middle area displays Compatible Hole Features the Holes that can be assigned to the current Feature Set. The lower area displays Incompatible Hole Features the Holes that cannot be assigned to the current Feature Set.
Incompatible Holes
645
The Feature Sets Page displays both the Compatible and Incompatible Hole Features for the Current Feature Set.
Compatible Hole Features tree, enables you to select the item to move to the current Feature Set. The selected Compatible Features can be moved to the Current Feature Set by the Move to Current Set command available in the right-click menu in the Compatible Holes
area.
646
Edit This option displays the Edit Feature Set dialog box. This dialog box enables you to edit the name and Axis type of the Feature Set and change the Machine CoordSys assigned to the Feature Set.
Remove All This option enables you to remove all Machinable Hole Features from the Feature Set. All the Machinable Features will be moved to the Holes bank. Delete This option enables you to delete the Feature Set. All the Machinable Features will be moved to the Holes bank.
9.7.7 Defining the CoordSys Position origin location for the Feature Set
SolidCAM enables you to define the default location of the CoordSys Position origin with the right-click menu on the Machine CoordSys of the specified Feature Set. The Place CoordSys origin at dialog box is displayed.
647
Corner of Model Box The CoordSys position can be placed in the corner of the model box.
CoordSys #1 The CoordSys position is placed in the position of Machine CoordSys #1.
648
9.8 Technology
For the each segment of the Machinable Hole Feature, SolidCAM chooses: A suitable technological solution from the Technology Database (TDB) (see topic 9.10). A tool from the Part Tool Table (see topic 3.6) or defines a new tool.
Machinable Hole Feature Segment Part Tool Table Technological Solution Technology Database
Operations
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
649
For each type of Machinable Hole Feature segment, there is a number of technological solutions (each technological solution can belong to only one type of Machinable Hole Feature segment). A Technological solution can be either a user-defined Machining Process or a built-in Algorithm.
Technological Solution
Technological Solutions
Algorithm
The user-defined Machining process contains Operation templates with parametric technology data and parametric data of the tools. It can be defined and edited by the user. A built-in Algorithm is hard-coded in SolidCAM; it generates a number of Machining Processes. Parameters of the algorithm can be edited. Technological solutions use the dimensions of the Machinable Hole Feature Segments. SolidCAM automatically chooses the suitable Technological solutions for the machining of the specified Machinable Hole Feature segment from the TDB. The choice of the Technological solution is defined by the set of conditions. A Condition is a logical expression; its result can be either true or false. When the condition is true, the current technological solution can be used to machine the Machinable Hole Feature segment. SolidCAM checks the conditions of the technological solutions in sequence; the first solution with a true condition will be chosen.
650
Choosing the tool for the Drilling Operation SolidCAM searches for the tool according to the pre-defined tool type, diameter and angle. These parameters are specified in the operation template of the specific Technological Solution. SolidCAM searches for the suitable tool in the Part Tool Table. If the search fails, SolidCAM performs an additional search with the same criteria in the Current Tool Library. If the tool is not found, SolidCAM defines a new tool according to the data of the operation template.
Technological Solution Tool Type Tool Diameter Tool Angle
Yes
No
Yes
No
Tool
Technological Solution
Choosing the tool for the Milling Operation SolidCAM searches for the tool according to the pre-defined tool type and corner radius. The search is performed in the Part Tool Table in the diameter range from 0 till the product of Hole diameter and Constant. Constant is equal to 0.9. The tool with the maximum diameter will be chosen. If the tool was not found in the Part Tool Table, the search will be performed again in the Current Tool Library.
Hole Diameter Tool Diameter Range 0 < Tool Diameter < Hole Diameter + Constant
651
In case of absence of a suitable tool, an error message is displayed and the tool has to be defined manually for the milling operation.
Technological Solution Tool Type Corner Radius Tool Diameter Range
Yes
No
Yes
No
Error
Tool
Technological Solution
Choosing the tool for the Center Drilling Operation SolidCAM searches for the tool in compliance with the pre-defined tool type and angle. The search is performed in the Part Tool Table in the diameter range from the value of the sum of the Hole diameter and Constant endlessly. Constant is equal to 1. The tool with the maximum diameter will be chosen. If the tool with such diameter was not found, SolidCAM chooses the tool of any diameter with a pre-defined tool type and angle. If the suitable tool does not exist in the Part Tool Table, the search will be continued in the Current Tool Library.
Hole Diameter
652
In case of absence of a suitable tool, an error message is displayed and a tool for the center drilling operation will have to be defined manually.
Technological Solution Tool Type Tool Angle Tool Diameter Range
Yes
No
Yes
No
Error
Tool
Technological Solution
Choosing the tool for the Chamfer Drilling Operation SolidCAM searches for the tool in compliance with the pre-defined tool type and angle. The search is performed in the Part Tool Table in the diameter range from the value of sum of the Hole diameter and Constant till the difference between the next segment diameter and Constant. The Constant is equal to 1. If the suitable tool does not exist in the Part Tool Table, the search will be continued in the Current Tool Library.
Hole Diameter
Next Segment Diameter Tool Diameter Range Hole Diameter + Next Segment Diameter < Tool Diameter < + Constant - Constant
653
In case of absence of a suitable tool, SolidCAM defines a new tool with the pre-defined tool type, angle and minimum possible diameter (Hole diameter + Constant).
Technological Solution Tool Type Tool Angle Tool Diameter Range
Yes
No
Yes
No
Choosing the tool for the Center Chamfer Drilling Operation SolidCAM searches for the tool in compliance with the predefined tool type and angle. The search is performed in the Part Tool Table in the diameter range from the value of sum of hole diameter and Constant endlessly. The Constant is equal to 1. The tool with the maximum diameter will be chosen. If the tool with such diameter is not found, SolidCAM chooses the tool of any diameter with a pre-defined tool type and angle. If the suitable tool does not exist in the Part Tool Table, the search will be continued in the Current Tool Library.
Hole Diameter
654
In case of absence of a suitable tool, an error message is displayed and the tool has to be defined manually for the operation.
Technological Solution Tool Type Tool Angle Tool Diameter Range
Yes
No
Yes
No
Error
Tool
Technological Solution
Choosing the tool for the Thread Milling Operation SolidCAM uses operation tools of Tap type for the Thread Milling Operation. SolidCAM searches the suitable tool for the operation according to the following criteria: The tool must be of Tap type. The Thread diameter of the tool must be equal to the Thread diameter defined in the Technological solution (hr_segm_diameter). The Pitch of the tool must be equal to the Pitch defined in the Technological solution (hr_segm_pitch).
655
These parameters are specified in the Operation template of the specific Technological Solution. SolidCAM searches for the suitable tool in the Part Tool Table. If the search fails, SolidCAM performs an additional search with the same criteria in the Current Tool Library. If the tool is not found, SolidCAM defines a new tool according to the data of the Operation Template.
Technological Solution Tool Type Thread Diameter Pitch
Yes
No
Yes
No
Tool
Technological Solution
Choosing the tool for the Reaming Operation SolidCAM uses tools of Reamer tool type for the Reaming Operation. SolidCAM searches the suitable tool for the operation according to the following criteria: The tool must be of Reamer tool type. The Reamer Diameter of the tool must be equal to the Reaming diameter defined in the Technological solution (hr_segm_diameter).
656
The search is performed in the Part Tool Table and Current tool library. If a suitable tool is not found, SolidCAM automatically defines in the Part Tool Table a new tool according to the tool definition in the Technological Solution.
Technological Solution Tool Type Reaming Diameter
Yes
No
Yes
No
Tool
Technological Solution
The lower part of the Technology page displays technological solution and tools chosen for the machining of the specified Machinable Hole Feature. Activate the Hole Picture dialog box with the Show Picture button located in the Holes Recognition toolbar to display the schematic picture illustrating the result of applying the Technological Solution.
SolidCAM enables you to display the Technology Hole Parameters dialog box with the Show Data button located in the Holes Recognition toolbar.
This dialog box enables you to edit the parameters of the specified technological solution. SolidCAM enables you to edit only parameters that were not marked as Read only in the Technology Database.
This command rebuilds the technology for the selected item. The technological solutions will be chosen again from the Technology database.
Find Tool
The Find Tool command enables you to perform the tool search again for the selected item.
658
This command is useful in the following cases: When the suitable tool was not found in the Part Tool Table and was not defined by SolidCAM. The Part Tool Table was updated. Managing Technological solutions The lower part of the Technology Page displays the set of Technological solutions necessary to the machining of the selected Machinable Hole Feature.
Change
This option enables you to change the Technological Solution. The Machining process list dialog will be displayed; this dialog enables you to choose the necessary solution from the list of available Solutions for this type of Machinable Hole Feature segment.
Find tool
This command enables you to automatically find the suitable tool from the Part Tool Table for the selected Technological Solution. This command is useful in the following cases: When the suitable tool was not found in the Part Tool Table and was not defined by SolidCAM. The Part Tool Table was updated. SolidCAM enables you to change the tool for the Technological solution with the Change Tool option. The option is available with the right-click menu on the Tool item.
659
The Part Tool Table dialog box will be displayed in order to select a new tool.
The Show command is available with the right-click menu on the operations of the Technological Solution. This command displays the operation dialog box with the parameters of the specified operation.
660
661
Technology Database
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
Technological Solutions
662
The Technology Database Manager dialog box is displayed containing the Global TDB. The Global Technology Database is unavailable when the Holes Recognition process is working. In this case only the Local TDB can be edited. The Local Technology Database can be loaded only when the Holes Recognition process is working. The Local TDB can be loaded by clicking on the related icon from the Holes Recognition toolbar. The Technology Database Manager dialog box is displayed containing the Local TDB.
663
Solutions/Congurations page
Variables area
664
The Configurations page of the TDB Manager enables you to manage configurations of TDB, either Global or Local. SolidCAM enables you to perform the following operations with the right-click menu. Set as Current This option enables you to make the specified configuration current. All the further operation will be performed for the Current Configuration.
Rename This option enables you to change the name of the specified User Configuration. The System Configuration cannot be renamed. Copy This option enables you to create a copy of the specified User Configuration. The System Configuration cannot be copied. Delete This option enables you to remove the specified User Configuration. The System Configuration, Current Configuration and last User Configuration cannot be deleted.
Add This option enables you to define a new Technological Solution within the specified Machinable Hole Feature segment. The Machining Process Define Manager dialog box is displayed (see topic 8.6). Delete This option enables you to remove the specified Technological solution from the TDB. Copy This option enables you to create a copy of the specified Technological Solution. Rename This option enables you to rename the specified Technological Solution. All the operations above are available only for Technological solutions of the User Configuration.
666
For the Technological solutions of the System Configuration, the following options are available: View This option enables you to display the specified Technological Solution in Machining Process View Manager. The displayed Solution cannot be edited. Copy To User Configurations This option enables you to copy the specified Technological Solution to the User Configurations. Since all the User Configurations use the same Technological solutions, the copied Technological solution can be used in all User Configurations.
9.10.6 Conditions
SolidCAM enables you to define the following set of conditions. If these conditions are true, the technological solution is chosen. A Condition is a complex logical expression; its result can be either true or false. When the condition is true, the current Technological solution can be used. SolidCAM checks the conditions of the Technological solutions in a defined sequence; the first solution with a true condition will be chosen. A Condition consists of condition lines combined by the logical operators AND and OR. A Condition line is a comparison of two expressions. The following comparison operators are acceptable in condition lines:
> (greater than); < (smaller than); = (equal); <= (smaller than or equal); >= (greater than or equal).
667
The expressions used in condition lines can include constants, user-defined variables and functions, HR-variables and functions.
Parametric menu For each Expression column, the parametric menu is available.
User-defined parameters
This option displays a list of existing user-defined parameters. These parameters can be used only for a Condition definition but cannot be used for the Technological solution definition. You can open this list with the F5 hotkey when the cursor is in the parametric field.
This option displays a list of existing Holes Recognition parameters. You can open this list with the F9 hotkey when the cursor is in the parametric field.
668
This option displays a list of existing Holes Recognition functions. You can open this list with the F11 hotkey when the cursor is in the parametric field.
Expressions
This option displays the list of defined expressions. SolidCAM enables you to use expressions for parameters definition. You can use the following symbols in expressions:
Addition (+) Subtraction (-) Multiplication (*) Division (/)
Parentheses are acceptable. When multiplication and division occur together in an expression, each operation is evaluated as it occurs from left to right. When addition and subtraction occur together in an expression, each operation is evaluated in order of appearance from left to right. Parentheses can be used to override the order of precedence and force some parts of an expression to be evaluated before others. Operations within parentheses are always performed before those outside. Within parentheses, however, operator precedence is maintained. You can open this list with the F7 hotkey when the cursor is in the parametric field.
669
Functions
Functions.
You can open this list with the F8 hotkey when the cursor is in the parametric field.
Edit-View
Here you can see and edit the full parameter name or expression string. You can open this list with the F2 hotkey when the cursor is in the parametric field.
9.10.7 Variables
The Variables area displays the list of variables and their expressions used in the Conditions area.
670
Variables menu The parametric menu available in the Expression column enables you to assign a value to each variable in the list.
User-defined parameters
This option displays a list of existing user-defined parameters. These parameters can be used only for variables definition but cannot be used for the Technological solution definition. You can open this list with the F5 hotkey when the cursor is in the parametric field.
Holes Recognition parameters
This option displays a list of existing Holes Recognition parameters. You can open this list with the F9 hotkey when the cursor is in the parametric field.
This option displays a list of existing Holes Recognition functions. You can open this list with the F11 hotkey when the cursor is in the parametric field.
671
Color definition
This option enables you to assign the color value to the variable using the Select Color dialog box. The colored button enables you to choose the color from the Color dialog box.
The Pick face button enables you to define the color by picking the model face. The color of the picked face will be captured and displayed in the dialog box. The Float value of the color and its RGB values are displayed in the corresponding edit boxes. When the dialog box is confirmed with the OK button, the Float color value is assigned to the variable. You can open this list with the F3 hotkey when the cursor is in the parametric field.
Functions
This option displays a list of existing Standard Functions. You can open this list with the F8 hotkey when the cursor is in the parametric field.
Edit-View
This option displays the parameter edit dialog box in which you can see and edit the full parameter name or expression string. You can open this list with the F2 hotkey when the cursor is in the parametric field.
672
Variables filter (Show variables used in) The following buttons enable you to filter the variables used for the Condition definition.
Database
This option enables you to display all the variables used in the TDB.
Technological segment
This option enables you to display all the variables used in the Technological solutions of the Current Technological segment.
Technological solution
This option enables you to display all the variables used in for the current Technological solution.
enables you to define a Machining Process as a Technological Solution. SolidCAM enables you to define parametric Operation Templates and use CAM-Part parameters, HR variables, expressions, standard functions for the parameters definition.
673
Tool definition SolidCAM enables you to define tools for operation templates. The tools have to be defined according to the tool search algorithms (see topic 9.8.2). For drilling operations, SolidCAM enables the parametric definition of the tool. The expression for the tool parameters have to be defined. When the Technological solution will be applied, expressions will be calculated and parameters used for the tool definition will get their values. The tool with defined parameters will be chosen according to the specific algorithm. For milling and chamfering operations SolidCAM enables the parametric definition of the tool but expressions for the tool parameters are unnecessary. SolidCAM will choose the tool according to the built-in algorithm. When the tool is chosen, the parameters will receive values offered by the tool search algorithm.
This function enables you to calculate the clear offset that have to be removed in Milling operation. This function receives the following parameters:
Diameter
next_diameter
674
delta=diameter/next_diameter
No
delta>tool_diameter
Yes
side_step=overlap*tool_diameter/100
clear_offset=(delta-tool_diameter)/2
No
delta>side_step
Yes
clear_offset=0
clear_offset=delta-side_step
clear_offset
hr_equal_down_step(,)
This function enables you to calculate equal down steps in order to machine the specified depth. The function receives the following values:
wish_down_step
hole_depth
The function returns the value of the equal down step closest to the wish_down_step parameter.
down_step
hole_depth
675
This option enables you to set the default location for the CoordSys position created by the AFRM at the stage of the Feature Sets definition.
Corner of Model Box
The CoordSys position is automatically placed at the corner of the box surrounding the model.
CoordSys #1
The CoordSys position is automatically placed at the position of Machine CoordSys #1.
676
Connection This page enables you to define parameters of the Hole Features connection.
Connection Holes
This option enables you to turn on/off the connection of the Hole Features.
Axis Tolerance
This parameter enables you to define the tolerance of the concentricity for the Hole Features that can be connected.
Use Max Distance between Holes
When this option is turned on, SolidCAM enables you to specify the maximal distance between hole features that can be connected. If the distance between the holes exceeds the specified value, holes will not be connected. Thread This page enables you to define the way how the threads are recognized.
By using HoleWizard information
Distance
The information from HoleWizard to determine threads and their parameters. When the By Cosmetic thread check box is selected, SolidCAM recognizes holes where thread is created by HoleWizard as a Cosmetic thread feature. When the By Hole specification and Hole shape check box is selected, SolidCAM recognizes holes using the information from the HoleWizard and analyzing the hole shape.
By Hole shape
Technology General
This option enables SolidCAM to automatically perform the center drilling. The center drilling will be inserted before the machining of the first Machinable Hole Feature segment that will be machined with the drilling technology.
Calculate operations inside Holes Recognition
This option enables you to postpone the calculation of the operations during insert them from the AFRM. Not calculated operations can be calculated later together with other CAM-Part operations. When this check box is selected (default), SolidCAM calculates the operations inserted by AFRM. Colors
This page enables you to define the colors that will be used in the HR Manager for the items changed or inserted by the user.
678
The Cutting angle parameter defines the minimal value of the arc angle. If the angle of the section of the Hole Feature is smaller than the defined value, SolidCAM does not recognize it as a hole.
Cutting angle
679
680
Simulation
10
You can use the simulation to check and view the generated tool path after you have defined and calculated your machining operations. If you have made mistakes defining the operations or used unsuitable milling strategies, the simulation can help you avoid problems you would otherwise experience during the actual production running.
HostCAD Simulation mode 2D Simulation mode 3D Simulation mode VerifyPlus Simulation mode SolidVerify Simulation mode RapidVerify Simulation mode Rest Material Simulation mode
10.1 Introduction
The SolidCAM simulation option enables you to check and view the generated tool path after you have defined and calculated your machining operations. The simulation can help you avoid problems such as mistakes in the definition of the operations or selection of an unsuitable milling strategy you would otherwise experience during the actual production running. To simulate an operation, right-click on its name in SolidCAM Manager. The operation menu will be displayed. Click on the Simulate option. You can simulate a group of selected operations. Select the operations with the Ctrl key, right-click on them and choose the Simulation option from the menu. To simulate all operations, right-click on the Operations header in SolidCAM Manager and choose the Simulation option from the menu. The Simulation control panel is displayed.
Show data Select this check box to display tool path information such as coordinates of the current point, time, feed in the Simulation Data dialog box.
682
10. Simulation
The X, Y, and Z fields display the position of the tool relative to the CoordSys at every step of the simulation. Feed displays the current feed rate. Time shows the elapsed machining time of the simulated operations (theoretical value based on feed and distance covered). Show tool Select the Show tool check box to toggle on/off the graphic simulation of the tool. The Show tool frequency field describes with what frequency SolidCAM must show the tool position. Stop on Next This option displays the Stop on Next dialog box where you can define the specific point to stop the simulation process. Tool change this option stops the simulation every time when the tool changes. Feed change this option stops the simulation every time when the feed changes. Rapid motion this option stops the simulation every time when the rapid motion is performed. Z change this option stops the simulation at every change of the Z coordinate of the tool. Tool Steps this option stops the simulation every defined number of tool steps. End of procedure this option stops the simulation at the end of the procedure. Clear This button clears the simulated tool path and the tool images from the screen. Colors Click on the Colors button to change the display color of the simulated tool path. The Simulation Colors dialog box is displayed.
683
1. To change the tool color, click on the colored box left to the tool number. 2. The standard color dialog box of Windows will be displayed. 3. Select the new tool path color for this tool number. 4. Confirm with the OK button. You can use the Reset to Default button to apply the default tool colors defined in the SolidCAM Settings dialog box. Simulation speed The slider controls the Simulation speed.
the screen. The image is shown when the simulation is completed or when you click on the Pause button. Plays the simulation in continuous mode.
Pauses
Single Step mode (simulate the next tool movement by clicking on the symbol or by using the space bar of your keyboard). Operation step mode. Simulation is shown separately operation by operation. Exit.
684
10. Simulation
The icons in the toolbar enable you to zoom and pan the simulation picture.
Erase on Z change This option automatically clears the image after every Z change of the tool.
Projection This option enables you to display the simulation on a Top view projection of the CAD model. When you choose this option, the following dialog box is displayed:
685
Define This option enables you to define entities of the CAD model that are taken into account in the Top view projection. When you choose this option, the following dialog box is displayed:
Select edges
The Select option enables you to select the edges of the CAD model by the Box, Pick or All edges options. The Unselect option enables you to unselect the previously selected edges.
Selection Filter
This option enables you to select edges on a specific Z-level. When you choose this option you can either pick the Z-level with the cursor on the model or you can enter the Z-level in the dialog box. Once you specify the Z-level, only those edges on that level will be picked.
Select edges by Box Pick
this option enables you to select/unselect edges by enclosing them with a box. this option enables you to select/unselect the edges one by one. this option automatically selects/unselects all the edges.
This option enables you to build the chain after you pick the edges.
Cancel
This option enables you to exit this dialog box. Delete This option enables you to delete what you had previously defined. Show on model This option enables you to see the geometry that was selected in the CAD model. Show This option enables you to see the model on the simulation screen.
686
10. Simulation
for Simulation.
Setup mode In this mode VerifyPlus enables you to specify the scale and orientation of the model. Simulation mode After setup, switch to the simulation mode. VerifyPlus shades the prepared block and prepares it for simulation. In this mode, machining can be simulated with standard SolidCAM simulation controls. In this mode all controls for setup of the simulation (scale and orientation) are disabled. You can turn on/off the visualization of tool and also specify the tool visualization as either wireframe or shaded. You can also rotate the display and define the light controls.
687
The area you want to view in the simulation screen is defined by box.
Move
This button enables you to flip the CAM-Part back and forth by 90 degrees. This option is needed to do realistic simulation on vertical/ horizontal machines.
These buttons enable you to view the CAM-Part in the left, right, back or front isometric views.
View buttons
These buttons enable you to view the CAM-Part in the top, left, back, bottom, right or front views.
Show/Hide Tool button
Pressing this button enables you to show or hide the tool during simulation. This option is also available in the simulation mode.
688
10. Simulation
Wire Tool/Shaded Tool
These buttons enable you to see the tool as a wire frame tool or as a solid tool.
The wireframe tool will always be seen in it entirety, whereas the solid tool is partially hidden by the CAM-Part.
Show/Hide Tool Holder
This button is active in turning only. When pressed, it allows you to see the holder of the turning tool.
Section View
This button is active in Turning only. When pressed, it allows you to see the whole CAM-Part or with a quarter cut away.
Normal mode
689
This button flips the CAM-Part back and forth. We need it in the simulation mode to see other sides of the CAM-Part during the simulation. This option is useful for multi-sided simulation.
Solid Rotate
This button enables you to rotate the CAM-Part to any position after simulation without exiting to Setup mode. To rotate the solid, click on any location inside the Graphics view using the left button of the mouse, hold the button down and drag the cursor across the screen. A small inset window at the center of the view will display a continuous snapshot of the current orientation of the model. When you release the button, the entire view is updated to show the new orientation of the model. The effect of the change in rotation is not permanent, and this change has to be reset to proceed with the Simulation.
Light control
This command enables you to use the left button of the mouse to change the light source on the solid model in the Simulation mode. To change the light source, click on any location inside the Graphics view using the left button of the mouse, hold the button down and drag the cursor around within the bounds of the view. A small inset window at the center of the view will display a snapshot of the current lighting effect on the model. When you release the button, the entire view is updated to show the light change effect on the complete model. The Move light source command is used for visual purposes only. The effect of the change in light source direction is not permanent. The light source change has to be reset before proceeding with the Simulation.
690
10. Simulation
691
SolidCAM enables you to use the toolbar to control the simulation in this mode. The following buttons are available in this toolbar: These buttons are used for model scaling, panning and rotating. This button enables you to remove the simulated tool path from the screen. With this button you can toggle on/off the tool visualization during the simulation. This button enables you to switch the graphic screen between three modes: Tool path only simulation Tool path and model simulation Model only simulation These buttons enable you to show the model in the projection views (Left, Right, Top, etc.) This button returns the original position and orientation of the model. These buttons switch the simulation to 4/1 view mode.
692
10. Simulation
This button enables you to show the Zoom Window with the enlarged image of the model and tool path fragment centered on the mouse position. You can control the zoom factor in the Zoom Window.
These buttons enable you to show the dynamic section of the model. The section slider will be displayed in the graphic area. By moving this slider you can control the section.
Settings Visual properties The Visual Properties dialog box enables you to edit the visual properties of 3D Simulation mode.
Target Model. SolidCAM enables you to choose the color of the Target model and set its transparency. Tool. SolidCAM enables you to choose the color of the tool and set its transparency. Background. SolidCAM enables you to choose the background color. Tool path. The Smooth (Wide) lines option enables you to perform smoothing of the tool path lines (anti-aliasing).
694
10. Simulation
This option enables you to use a single color for all tools during the simulation process.
Color by tool
Use this option to define a specific color for each tool. Click on the Color by tool button to set the colors. The Simulation Colors dialog box will be displayed.
1. To change the tool color, click on the colored box left to the tool number. 2. The standard color dialog box of Windows will be displayed. 3. Select the new tool path color for this tool number. 4. Confirm with the OK button. You can use the Reset to Default button to apply the default tool colors, as defined in the SolidCAM Settings dialog box.
695
Available buttons:
Fit to window
The area you want to view in the simulation screen is defined by a box.
Move
The Selection mode enables you to select the solid bodies in the graphic area. The selected body will be highlighted. The right-click menu is available for each selected solid body. For more information on the Selection mode, see topic 10.6.3.
Measurement
The Measurement function enables you to measure distances directly on the solid bodies in the SolidVerify window. This enables checking the linear dimensions of the part during simulation. For more information on the Measurement, see topic 10.6.4.
Light control
This command enables you to use the left button of the mouse to change the light source on the solid model in the Simulation mode. To change the light source, click in the graphic area and drag the cursor around within the bounds of the view.
696
10. Simulation
View buttons
These icons enable you to show the model in the projection views (Left, Right, Top etc.).
Render mode
Hybrid mode
Wire mode
Displays the CAM-Part and the tool movements in hidden-line wireframe mode.
697
Redraw
This dialog box enables you to switch between split solids during the simulation and enables you to remove the pieces of material that have been cut away during the machining.
Show/Hide Gouges
This option displays the Show/Hide Split solids dialog box. This dialog box enables you to switch between split solids of gouge areas during the simulation and enables you to check separately the areas of the gouge.
698
10. Simulation
Compare target and machined stock
This option enables you to compare the machined stock model and target model and assign different colors to different rest material areas, depending on the value of the difference between the machined stock model and the target model.
1. Set the difference values and colors in the Target and Machined Stock Compare Options dialog box. 2. Click Execute to show the comparison. 3. Click OK to exit.
Activate/Deactivate initialization of machined stock
The Activate/Deactivate initialization of machined stock button enables you to calculate and use the Updated Stock model for the simulation of the chosen operations. When this option is not chosen, SolidCAM performs the simulation of chosen operations on the Stock model. When this option is chosen, SolidCAM performs the simulation of chosen operations on the Updated Stock model. For more information on the Updated Stock model, see topic 10.6.5.
Show/Hide Tool
Shows or hides the fixture during simulation. For more information on the Fixtures definition, see topic 5.6.
699
This field enables you to save the current model of the material removal in STL format. This field is active only when the Manual method of the Rest material update are chosen. For more information on this subject, see topic 2.4.
Load the simulation model
This field enables you to load the previously saved model of the material removal. The simulation will be performed on the loaded model. This field is active only when the Manual method of the Rest material update are chosen. For more information on this subject, see topic 2.4.
700
10. Simulation
Properties This option displays the Properties dialog box. This dialog box enables you to edit the visual properties of the selected solid body.
Color
This button enables you to choose the color of the selected solid body.
Transparency
This slider enables you to adjust the transparency level of the selected solid body.
Show Edges (Hybrid mode)
This option enables you to display in the Hybrid mode all the edges of the selected solid body. The Edge Color option defines the color of the edges.
Volume
10.6.4 Measurement
The Measurement function enables you to measure distances directly on the solid bodies in the SolidVerify window. This enables checking the linear dimensions of the part during simulation. The Measure dialog box enables you to pick the pair of points directly on the simulation model. The coordinates of the selected points and the distance between them will be displayed in the Measure dialog box.
701
Automatic mode
In the Automatic mode, SolidCAM automatically calculates the USM for the operations chosen for the simulation. To generate USM for the chosen operation, SolidCAM runs the SolidVerify simulation of all the previous operations in an invisible mode. The resulting USM is saved in *.stf file in the CAM-Part folder. During the USM calculation process for the current operation, SolidCAM generates intermediate USM files for the previous operations and saves them according to the Updated Stock calculation settings. Saved USM files can be used in further SolidVerify simulations. If the USM file for some operation already exists, SolidCAM checks the compliance between accuracy settings of the USM and SolidVerify Accuracy Settings of the CAMPart. If these settings concur, SolidCAM uses the existing USM, otherwise the USM will be recalculated in accordance with the CAM-Part settings. The Delete Updated Stock files command in the Settings menu of the SolidVerify simulation enables you to erase all the USM files of the current CAM-Part. This command is unavailable in the Manual mode.
Manual mode
In the Manual mode, SolidCAM enables you to manually save the USM after the SolidVerify simulation and use it for additional simulations. When the Manual mode is chosen, the Save Machined stock to file and Load Machined stock from file buttons are available in the SolidVerify simulation toolbar (see topic 10.6.2). When the simulation for a separate operation or for a number of operations is performed, the Save Machined stock to file button enables you to save the USM in the *.stf file. The name of the file is the same as the name of the last simulated operation. SolidCAM enables you to load the USM of previous operation (if it was saved) with the Load Machined stock from file button and perform the simulation on it. SolidCAM automatically deletes USM files for the specific operation when: the operation was deleted; the operation was changed and caused the deletion of the operation PCode; the operation sequence was changed; the accuracy parameters were changed; the working mode was changed from Manual to Automatic.
702
10. Simulation
Updated Stock Model interchangeability Updated Stock models generated for the SolidVerify simulation and for 3D Milling of Rest material areas are interchangeable. This means that SolidCAM can use USM files generated for the SolidVerify simulation instead of USM files for 3D Milling and vice versa. If the USM file for 3D Milling is already generated for some operation it can be used also for SolidVerify simulation if the Accuracy settings of the USM match the SolidVerify Accuracy Settings of the CAM-Part.
This option enables you to load the machined stock model from the SolidCAM FCT file (*.fct).
Open machined stock from STL
This option enables you to load the machined stock model from the Stereolithography file (*.stl).
Save Save machined stock to FCT
This option enables you to save the machined stock model to the SolidCAM FCT file (*.fct).
Save machined stock to STL
This option enables you to save the machined stock model to the Stereolithography file (*.stl). Options
Compare target and machined stock
This option enables you to compare the stock model and target model and assign different colors to different rest material areas, depending on their tolerance (see topic 2.4).
703
This option displays the Machined Stock Measurements dialog box where you can see the dimensions and the volume of the Machined stock model. This option is available in the SolidVerify simulation mode only. Settings Visual properties This option enables you to define colors and transparency for the simulation. The dialog box will be displayed.
Visual Properties
The Use CAD background color check box enables you to apply the simulation background color provided by the CAD system. The Use Gradient background check box enables you to apply the gradient background to the graphics area. Specify colors for Top Background Color and Bottom Background Color.
704
10. Simulation
General
Move tool redraw interval Optimize redraw
this option enables you to expedite the simulation by defining the number of tool movements until the next redraw of the display. The default value is 7.
Clash detection
SolidCAM enables you to check the possible collisions between different components participating in the machining (tool, tool holder, machined stock model and fixture) during the simulation. Holders and Stock this option enables you to check the possible collisions between the tool holder and the machined stock model. Tool and Fixture this option enables you to check the possible collisions between the tool and the fixture model. Holders and Fixture this option enables you to check the possible collisions between the tool holder and the fixture.
Rest Material and Gouge filter
Remove Rest Material of volume less than: SolidCAM enables you to define the tolerance of the Rest material visualization. Remove Gouges of volume less than: SolidCAM enables you to define the tolerance of the Gouge areas visualization. These options are available only in the SolidVerify simulation mode.
Target Model
Load automatically When this check box is selected, the target model will be loaded automatically when the simulation starts. The Target model loading is necessary for the gouge and rest material calculation in these simulations.
705
When this check box is not selected, SolidCAM will not load the target model automatically. This feature enables you to increase the loading speed and the simulation performance. The Load Target model button will be displayed in the simulation toolbar. This button enables you to load the Target model.
OpenGL rendering
The functionality is implemented to improve the simulation performance with different graphic adapters. The OpenGL rendering options enables you to switch between the software/hardware OpenGL acceleration. Software disables the OpenGL hardware capabilities and enables graphics rendering using software only. For many graphic cards, this results in slower performance. Select this option only if instructed to do so by technical support. This option enables you to solve the visualisation troubles if your graphic card does not support hardware acceleration, or does not support it for the current combination of resolution, number of colors, refresh rate, and so forth. Hardware this option is selected by default. The hardware OpenGL provided by your graphics adapter will be used. The Use advanced hardware acceleration option enables you to use hardware acceleration provided by your graphic adapter.
Stock Splitting
During the machining, the tool cuts off the material pieces. These pieces fall down from the machining area. This option enables you to automatically determine and remove such material pieces. This option is available only in the SolidVerify simulation mode.
706
10. Simulation
The Stock splitting options enable you to control the process of automatic removal of cut off pieces.
Do not check for Stock splitting
With this option, SolidCAM does not check the simulation solid model for splits. The cut off material pieces can be hidden or removed manually using the Show/Hide Split solids dialog box.
Automatically remove split solids
With this option, SolidCAM automatically determines stock splitting. When the split is determined, SolidCAM compares two resulting solids and automatically removes the smaller one.
With this option, SolidCAM automatically determines stock splitting and the following message is displayed:
Show & Remove. The simulation will be paused and the Show/Hide Split solids dialog box will be displayed. This dialog box enables you to hide or remove the cut off material pieces. Ignore. The simulation will be continued till the next split is determined. When the simulation is finished, the Show/Hide Split solids dialog box will be displayed. This dialog box enables you to hide or remove the cut off material pieces. Stop monitoring. The simulation will be continued till the end without monitoring of splits.
707
This option controls the precision of the tool for the simulation. This parameter defines the precision of the facets of a tool in mm (or inches). Since this is an absolute value, the facets tolerance for the small and large tools will be the same. This tolerance will influence the quality of the simulation. The quality of the simulation will be the same for large tools and small tools. The speed of the simulation will be relative to the tool. The simulation of the larger tool will be slower.
Tool facet type
As well as changing the tolerance used for faceting, the application controls the manner in which the faceted tool representation approximates the tool by forcing the representation to be bigger or smaller than the actual tool. For example, if you want to know whether the tool gouged the target part, then it would be preferable for SolidVerify to have a tool representation that was guaranteed to lie outside the bounds of the actual tool. Internal The tool representation lies within the actual tool. The vertices of the tool representation will lie on the surface of the actual tool and the facets will lie within the actual tool. External The actual tool lies within the tool representation. The vertices will lie at distances up to the faceting tolerance from the surface of the actual tool. Mixed This is a combination of Internal and External. The vertices lie outside the actual tool but parts of the facets may lie inside it. This mode is the default and should be used unless there is a specific reason for using one of the other modes as it generates fewer facets and will therefore be faster.
5 Axis
Linear interpolation. This option enables you to perform the linear interpolation of 5 axis tool movement. The Max. Interpolation Angle value defines the angular tolerance for the interpolation.
708
10. Simulation
Delete Updated Stock files The Delete Updated Stock files command enables you to erase all the Updated Stock model files of the current CAM-Part (see topic 10.6.5). This command is unavailable in the Manual mode. Tools
Self-intersections
Many problems occur in simulations if the used solids (Machined Stock model, Target model or Fixture) are not topologically valid. In particular, in these simulation modes you are likely to encounter problems with solids that contain self-intersections that is, solids which contain pairs of overlapping polygons, or individual polygons with crossing edges. Self-intersections can be encountered in the following cases: The model (Stock, Target or Fixture) is based on a SolidWorks assembly or sub-assembly containing a number of components. The model (Stock, Target or Fixture) is based on a SolidWorks part containing a number of disjointed solid bodies. The model (Stock, Target or Fixture) is based on a SolidWorks part with corrupted geometry (gaps, self-intersections etc.). Such self-intersection problems can be solved by SolidWorks tools.
709
The difference between SolidVerify for 3D and the regular SolidVerify is as follows: SolidVerify works with facet representation of the model and tool; the facet model of the stock model is created, and the facet model of the tool is subtracted from it for each tool movement. On the other hand, SolidVerify for 3D works with analytical geometry in order to represent the updated stock. All the calculations are performed for analytical geometry, the resulting surface mesh is generated and rendered in order to visualize the cutting process. Since SolidVerify for 3D uses more precise analytical data, the visualization result is more accurate, especially in close zoom. Increasing simulation speed and rendering performance The simulation speed and rendering performance depend on the size of the model in the simulation view. To increase the performance, it is recommended to zoom out the model before the simulation and hide the tool and holder. When the simulation reaches a specific area that you want to check in depth, you can zoom in to this area and perform a high quality rendering of the simulation model.
710
10. Simulation
The settings of this mode can be controlled in the Facet rendering section of the View Settings dialog box. This dialog box is available by clicking on the View Settings item in the Settings menu. The Facet rendering section contains the slider that enables you to control the quality and speed of the rendering, moving from faster draft quality to slower but higher quality.
711
Pixel rendering In this mode, a high quality pixel-based rendering of the model is performed.
When you start the simulation by clicking on the Play button, the system calculates the model rendering and the simulation starts to run. Each time you perform view manipulations on the model (e.g. zoom or rotate), the simulation stops and the model display changes to draft quality. When you release the mouse button, the system recalculates the pixel-based model rendering, and the simulation resumes.
712
10. Simulation
When the simulation is paused by user request, clicking on the High quality button in the Rendering progress toolbar located in the graphic area of the simulation window generates a high quality pixelbased model rendering; the rendering process can be interrupted either by pressing ESC button, or by manipulating the model (zoom, pan and rotate).
The settings of the Pixel rendering mode can be controlled in the View Settings dialog box. In this section, you can define the direction of rendering: it can be performed from top to bottom of the screen or from the screen center outwards. The Multi-stage rendering check box enables you to display model rendering in stages, from draft quality to high quality.
713
714
10. Simulation
The RapidVerify data structure is based on a grid of material height values. The resolution of this grid can be modified by the Grid Resolution slider. Greater resolution will improve verification accuracy but at the expense of slower graphical update and increased memory usage. Using the Speed-up Animation option, SolidCAM enables you to increase the simulation speed by simplifying the intermediate simulation images. When this option is turned on, SolidCAM merges a specified number of facets into a single one; the Facet Merging parameter enables you to define the number of neighbouring facets that are merged together. The simplified model is displayed during the simulation, resulting in accelerated rendering and refreshing. When the simulation is paused or finished, the non-simplified machined stock is displayed. The simplified image is also displayed during pan, zoom or rotate operations. There are two possible scenarios for using the RapidVerify simulation mode: 1. For the fastest verification, use Turbo mode and click on the right mouse button (or rotate/pan) to get intermediate updated stock; you do not need to use the Speed-Up Animation option in this scenario. 2. For regular verification, set the Speed-up Animation option to a higher number for Facet Merging; you will see a continuous verification on a not so clear model. Whenever you stop the verification you will see an accurate model representation.
715
This option enables you to use a single color for all tools during the simulation process.
Color by tool
Use this option to define a specific color for each tool. Click on the Color by tool button to set the colors. The Simulation Colors dialog box will be displayed.
1. To change the tool color, click on the colored box left to the tool number. 2. The standard color dialog box of Windows will be displayed. 3. Select the new tool path color for this tool number. 4. Confirm with the OK button. You can use the Reset to Default button to apply the default tool colors, as defined in the SolidCAM Settings dialog box.
716
10. Simulation
Available buttons:
Fit to window
The area you want to view in the simulation screen is defined by a box.
Move
This command enables you to use the left button of the mouse to change the light source on the solid model in the Simulation mode. To change the light source, click on any location inside the Graphics view using the left button of the mouse, hold the button down and drag the cursor around within the bounds of the view.
View buttons
These icons enable you to show the model in the projection views (Left, Right, Top etc.).
Redraw
717
This option enables you to compare the machined stock model and target model and assign different colors to different rest material areas, depending on the value of the difference between the machined stock model and the target model.
1. Set the difference values and colors in the Target and Machined Stock Compare Options dialog box. 2. Click Execute to show the comparison. 3. Click OK to exit.
Activate/Deactivate initialization of machined stock
The Activate/Deactivate initialization of machined stock button enables you to calculate and use the Updated Stock model for the simulation of the chosen operations. When this option is not chosen, SolidCAM performs the simulation of chosen operations on the Stock model. When this option is chosen, SolidCAM performs the simulation of chosen operations on the Updated Stock model. For more information on the Updated Stock model, see topic 10.6.5.
Show/Hide Tool
Shows or hides the fixture during simulation. For more information on the Fixtures definition, see topic 5.6.
718
10. Simulation
Machine view
Machine view This area is the graphic area where you can see your CNC-machine and the machined part. All the tool movements along the tool path and motions of the CNC-machine components are displayed in this area. Simulation control This area is divided into the following elements:
Simulation menu; Simulation windows and tabs; Simulation toolbars.
719
The Windows-style menu located above the graphic area contains the following sets of simulation control options: File
When you perform simulation in the Machine simulation mode, SolidCAM saves all the simulation data in the Output.sim file located in the CAM-Part folder. The Load NC file option enables you to load an existing NC file containing the simulation data.
Create Presentation
This option enables you to create a self-extracting executable file containing the current CNC-machine and NC file. When you run the generated executable file, it unpacks in the system temporary folder and displays the standalone MachSimPresentation window.
720
10. Simulation
This window provides you with the CNCmachine data, tool path and all the tools to run and control the simulation and verification of the tool path. Using this file, the simulation can be displayed on any computer even without SolidCAM being installed. When you choose this command, the Save As dialog box is displayed. In this dialog box, you have to enter the name for the presentation file and specify its location. To add a title to your presentation, select the Set caption check box and enter the title in the relevant text box. To enable the possibility to run the presentation file on all Windows platforms, select the Ensure support for all Windows platforms check box. The Create Presentation option is also available by clicking on the in the Setting toolbar.
Create Simulation Report
button
This option enables you to save a simulation report file in the XML format. When you choose this command, the Save As dialog box is displayed. In this dialog box, you have to enter the name for the report file and specify its location. The generated report file contains the information about the simulation running time and the memory it requires, the measurement units, collision checking, the tools used, etc.
721
View This menu item contains the commands responsible for the display of the simulation model in the Machine view area. Fullscreen This command enables you to extend the simulation window to the entire screen size. Fit to screen This command enables you to adjust the simulation model size to the graphic area. This option is also available as the Standard Views This submenu contains commands that enable you to rotate the simulation model to the appropriate standard view.
Isometric: this button enables you to rotate the simulation model into the isometric view.
view.
Top: this button enables you to rotate the simulation model into the top side Front: Right:
side view.
this button enables you to rotate the simulation model into the front this button enables you to rotate the simulation model into the right
side view.
Bottom: this button enables you to rotate the simulation model into the bottom side view.
view.
Left: this button enables you to rotate the simulation model into the left side Back:
side view.
this button enables you to rotate the simulation model into the back
10. Simulation
Show/Hide This submenu contains commands that enable you to control the display of various machine and model components in the Machine view area. this button enables you to toggle the display of the tool path in the graphic area of the simulation. area of the simulation.
Tool: this button enables you to toggle the display of Tool path:
this button enables you to toggle the display of the stock model in the process of machining. When the stock is displayed, you can perform solid verification of the material cutting process in the SolidVerify mode integrated into the Machine simulation. The simulation is performed by dynamic subtraction of the tool solid model (using solid Boolean operations) from the stock solid model. To perform solid verification on the stock model, select the Enable verification check box in the Machine simulation page of the SolidCAM Settings dialog box.
Initial Stock: this button enables you to toggle the display of the stock initial state before the machining. Machine Housing: this button enables you to toggle the display of the machine housing in the graphic area of the simulation.
723
Focus This submenu contains commands that enable you to directly zoom and observe simulation model elements in stationary position.
Tool Focus:
Workpiece Focus: this button enables you to display the machined workpiece
Machine Focus: this button enables you to display the entire machine model
the tool path is displayed during the simulation. the material removal is displayed during the simulation. the machine kinematics is displayed without the tool path
Kinematic mode:
These modes are also available as buttons in the Simulation modes toolbar.
724
10. Simulation
Toolpath rendering This submenu contains commands that enable you to choose the mode of tool path display. relative to the center or to the tip of the tool.
Tool center/Tool tip: these commands enable you to display the tool path
these commands enable you to display the tool path for all of the part operations all at once or only for the current one.
Display All Operations/Display Current Operation: Follow/Trace/Segment: these commands enable you to display the already machined tool path (Follow), the one to be machined (Trace) or the segments of the tool path which are currently being machined (Segment). Tool Vector/Toolpath points: these commands enable you to display the vectors of the tool tilting relative to the machined surface (Tool Vector) and the tool path by sequence of points (Toolpath points).
these commands enable you to toggle the display of the tool approach and linking movements. These modes are also available as buttons in the Toolpath rendering toolbar.
Leads/Links:
the current machine definition by right-clicking on an element to add/erase tree elements or display the machine properties.
725
Save Machine:
Save Machine As: this command enables you to save the edited machine definition under a different name and/or in a different folder.
Control This menu item contains commands that enable you to control the progress of the simulation. this command enables you to start the simulation.
Pause: this command enables you to pause the simulation. Run:
Stop:
726
10. Simulation
previous/next operations.
Fast Forward: this command enables you to perform the simulation in the system memory and display the final result. Restart: Loop:
this command enables you to start the simulation from the very beginning.
Speed Slider: this command enables you to display the Simulation Speed dialog box. This dialog box contains the slider to control the simulation speed.
Settings
This menu item contains the commands that enable you to manage the simulation settings and to adjust the simulation interface in accordance with your requirements. Simulation Properties This command displays the Simulation Properties dialog box that enables you to edit the simulation settings.
727
This dialog box contains the following sets of parameters for managing the Machine simulation settings:
Simulation Process
This tab contains options that affect the simulation when it is running.
The Stop conditions section enables you to stop the machining in the following cases: On tool change: whenever the tool changes; After ... moves: after a certain number of moves; Height relative to workpiece greater than ...: when the tool exceeds a certain threshold above the workpiece; At operation ... block ID ...: in a certain operation, in a certain move number. When the required operation name is chosen from the list, the total number of moves of this operation is automatically displayed in the Block ID edit box; this number can be edited. The move numbers are displayed in the Pos column of the Move List window. The Notification section enables you to turn on the display of notifications in case of the following events reported:
Geometrical Collision: collision between tool and machine geometry; Material Collision:
when one of the moving parts of the CNCmachine exceeds a limit defined in the CNC-machine definition; when wrong data is detected, e.g. wrong tool
dimensions.
728
10. Simulation
the Enable geometry collision box that activates the collision checking on the geometry in the material removal mode. The Simulation section contains the summary of the simulation data.
This tab contains options for setting the background color of the simulation window, for display of Coordinate System and ruler, and the slider to control the visualization speed.
729
The Segment length option enables you to set the length of tool path segments displayed when running the simulation in the Follow/Trace modes. The Axis vector length option enables you to set the length of the tool tilting vector when running the simulation in the Tool Vector mode. This length can be set as a value or as the radius of the tool used for the operation. The colored rectangle on the right enables you to set the color of the vectors visualization. The Tool path points option enables you to set the size (in pixels) of the tool path points when running the simulation in the Tool path points mode. The colored rectangle on the right enables you to set the color of the points visualization. Hot Keys This command displays the HotKey Settings dialog box that enables you to define hot keys and mouse settings for the simulation control. Choose an appropriate operation in the Keys settings or Mouse settings section and assign the required combination of the keyboard keys and mouse buttons. Toolbars This submenu lists the simulation control toolbars that can be displayed or hidden by clicking on each item in this list. The Customize option enables you to customize the toolbars and separate commands that can be used during the simulation.
730
10. Simulation
Windows This submenu lists the simulation windows and tabs that enable you to define and control the CNCmachine and other data used for the simulation. These windows are displayed in tab view to the right from the graphic area (the Report, Machine and Analysis tabs and the Move List window) or at the bottom of the main SolidWorks window (the Progress bar and the Axis Control window). Layouts This submenu lists the simulation window layout options. The Reset to default option resets the window layout to default. The All Windows option displays all windows and tabs listed in the Windows submenu. The No Windows option hides all windows and tabs listed in the Windows submenu. Only the graphic area is displayed. The Save to file option enables you to save the current layout scheme as a *.layout file in the machine definition folder. The Load from file option enables you to load a previously saved layout file. Application Look This submenu enables you to adapt the machine simulation interface to the color schemes of commonly used applications such as MS Office, Windows XP, etc.
731
Help This menu item displays the information and help issues regarding the Machine simulation feature.
Machine view
Machine This tab displays the CNC-machine definition tree and enables you to define the CNC-machine and manage the CNC-machine components displayed in the graphic area.
732
10. Simulation
The buttons in the tab toolbar enable you to manage existing machine definitions and add new ones.
New Machine:
this button enables you to create a new machine definition. this button enables you to load a different existing machine.
Save Machine As: this button enables you to save the edited machine definition under a different name and/or in a different folder. Edit Machine: this button enables you to edit the current machine definition by rightclicking on an element to add/erase tree elements or display the machine properties. Info: this button toggles the display of the information about the listed machine components.
The CNC-machine definition tree displays all components of the CNC-machine used for the machining of the current CAM-part. The tree displays all the structure of the CNC-machine and the relation between all the CNC-machine components. In the simulation mode, SolidCAM enables you to control the visual properties of the CNC-machine components using the right-click menu available on each component.
Properties
The Appearance dialog box is displayed. The Visible check box enables you to control the visibility of the chosen component of the CNCmachine.
Show/Hide
This option enables you to show/hide the chosen component of the CNC-machine.
Transparent/Opaque
This option enables you to control the transparency of the chosen component of the CNC-machine.
733
Choose color
This option enables you to choose the color of the chosen component using the standard color selection dialog box.
Report This tab lists the operations with tools used and all events that happen during simulation. The items in the report are listed in a tree format structure as operations followed by the tool number and the tool definition. The following event types can be reported:
Value underflows and overflows; Collision events.
Move list This window displays the lines of the GCode as the operation is running on; the active GCode line is highlighted. SolidCAM enables you to display coordinates relative to the CAMPart coordinate system or to the CNC-machine origin, depending on the Machine simulation settings (see topic 12.14). The slider to the right enables you to navigate through the GCode.
The Collision and Out of limits icons appear to the left of the GCode string in case of an appropriate event.
734
10. Simulation
Axis Control This window enables you to control the tool location manually using the axis sliders. It displays the current coordinates of the CNC-machine. Each axis has a control slider that enables you to perform manual movements within the specified limits. The manual axis control cannot be used when the simulation is in progress. Stop the simulation to enable it. Right-clicking on the coordinate sliders displays the Change slider dialog box that enables you to enter the exact value for the current coordinate. Progress The Progress bar shows the advance of the simulation process. It consists of a slider that moves as the simulation is running on and a colored stripe that represents different tools by different colors. The colors of the tools are also displayed in the Report tab.
position
Analysis This tab contains color representation of various elements of the simulation to facilitate the visualization. Choose an element from the list to display its analysis in colors. You can change the color for each item by double-clicking on the corresponding rectangle and choose the desired color from the displayed Windows-style Color dialog box. Click on the
Refresh
735
Tool number
When you choose this element from the list, the table below displays the tool path color scheme according to the tools used in part operations. The tools are numbered in the corresponding column and represented by rectangles of different colors in the leftmost column.
Operation number
When you choose this element from the list, the table below displays the tool path color scheme according to the part operations. The operations are numbered in the corresponding column and represented by rectangles of different colors in the leftmost column.
736
10. Simulation
Tool path sequence
When you choose this element from the list, the tool path is represented in a gradient color scale according to the progress of machining. This scale enables you to easily identify the start point and the end point of the machining, the cutting method (e.g. Zigzag or One way), the cut order (e.g. from outside to inside), and other machining parameters.
When you choose this element from the list, the tool path is represented in a gradient color scale according to tilting angles of the machine rotation axis. This scale enables you to identify the rotation axis angle range used in the operation, the rotation angle used for machining of specific areas, and limit overruns that occur during the simulation. The angle range values are displayed in the corresponding columns of the table.
737
You can define a specific angle range to view the tool path in the corresponding colors. Click on the
Adjust button in the toolbar to the right from the options list. The Adjust angle scale dialog box is displayed. This dialog box enables you to enter the minimal and maximal values for the angle range and return to default values, if necessary.
When you choose this element from the list, the tool path is represented in colors according to change of direction of the machine rotation axes. These colors enable you to identify the areas where possible contouring errors have negative influence on the machining result (surface quality). Every time when a rotation axis changes its direction, the tool path segment changes its color.
738
10. Simulation
B axis value change/C axis value change
When you choose this element from the list, the tool path is represented in a gradient color scale according to change of tilting angles of the machine rotation axis. This scale enables you to identify the rotation speed range used in the operation, the rotation speed used for machining of specific areas and determine the areas where machine speed limits are reached.
You can define a specific angle range to view the tool path in the corresponding colors by click on the Adjust button and entering the values into the Adjust angle scale button in order for the change to take effect. dialog box. Click on the Refresh
Linear axis reversal
When you choose this element from the list, the tool path is represented in colors according to change of direction of the machine linear axes. Every time when a linear axis changes its direction, the tool path segment changes its color.
739
You can define a threshold angle value for the axis reversal to view the tool path in the corresponding colors by clicking on the Adjust button and entering the values into the Linear axis threshold angle dialog box. Click on the Refresh
Orientation change
When you choose this element from the list, the tool path is represented in a gradient color scale according to change of orientation of the machine rotation axes. This scale enables you to identify the rotation speed range used in the operation, the rotation speed used for machining of specific areas and determine the areas where machine speed limits are reached.
Toolbar buttons
this button enables you to update the simulation when changes have been made in the analysis settings.
Add:
Refresh:
this button enables you to add values into the table. this button enables you to remove selected values from the
table.
Remove:
this button enables you to set limitations for specific parameters to display the tool path in different colors according to the defined settings.
Auto adjust: when you click on this button, the system automatically sets the parameter ranges for the defined settings.
Adjust:
740
10. Simulation
The buttons of this toolbar enable you to rotate the simulation model to the appropriate view (Isometric, Right, Front, etc.). These buttons are also available as commands in the Standard Views submenu of the View menu (see topic 10.10.1). Visibility
The buttons of this toolbar enable you to control the display of various machine and model components in the graphic area. These buttons are also available as commands in the Show/Hide submenu of the View menu (see topic 10.10.1). Simulation modes
This submenu contains the modes of simulation model display. These buttons are also available as commands in the Simulation mode submenu of the View menu (see topic 10.10.1).
741
Focus
The buttons of this toolbar enable you to directly zoom and observe elements such as tool, workpiece and machine in stationary position. These buttons are also available as commands in the Focus submenu of the View menu (see topic 10.10.1). Tool path rendering
The buttons of this toolbar enable you to choose the mode of tool path display. These buttons are also available as commands in the Focus submenu of the menu (see topic 10.10.1).
View
Control
The buttons of this toolbar enable you to control the progress of the simulation. These buttons are also available as commands in the Control menu (see topic 10.10.1). Settings The buttons of this toolbar enable you to manage the simulation settings and to adjust the simulation interface in accordance with your requirements.
742
10. Simulation
The Create Presentation button enables you to create a self-extracting executable file containing the current CNC-machine and NC file (see topic 10.10.1). The Hot Keys button displays the HotKey Settings dialog box that enables you to define hot keys and mouse settings for the simulation control (see topic 10.10.1). The Simulation Properties button displays the Simulation Properties dialog box that enables you to edit the simulation settings (see topic 10.10.1).
In this type of CNC-machines, both rotational axes are mounted on the head of the CNC-machine.
Rotation axes
Example:
Table-Table
In this type of CNC-machines, both rotational axes are mounted on the CNC-machine table.
Rotation axes
Example:
kinematic_type = TABLE_TABLE_NEW
744
10. Simulation
Head-Table
In this type of CNC-machines, one rotational axis is mounted on the head and the other is located on the table of the CNC-machine.
Rotation axes
Example:
kinematic_type = HEAD_TABLE
When the kinematic_type parameter is not specified in the MAC file, SolidCAM uses the following default value:
kinematic_type = HEAD_HEAD
745
Spindle direction The spindle_direction parameter enables you to define the direction of the spindle axis of the CNC-machine. The direction is defined by a vector, e.g. when the spindle is parallel to the Z-axis, the vector is (0,0,1).
Example:
When the spindle_direction parameter is not specified in the MAC file, SolidCAM uses the following default value:
spindle_direction = 0.0000 0.0000 1.0000
Rotational axes direction The rotate_axis_dir1 and rotate_axis_dir2 parameters enable you to define the direction of the first and the second rotational axes, respectively.
Example:
The direction of the rotational axes is defined according to the tool movements around the axis. The right hand rule is used for the direction definition (the fingers of the right hand are curled in the positive tool rotation direction, and the thumb indicates the positive direction of the rotational axis). Correspondingly, when the rotational axis is pointing away from the observer, the positive tool rotation direction is clockwise; when the rotational axis is pointing towards the observer, the positive tool rotation direction is counterclockwise.
746
10. Simulation
If the rotation around the axis is performed by the spindle, the direction of the rotational axis is defined as shown. In some cases, the rotation around the axis is not performed by the spindle. For example, in CNC-machines of the Table-Table type, the rotation is performed by the rotary table and tilting is performed by the tilting table. In this case, the direction of the rotational axes is defined according to the virtual spindle rotation around the axis as shown below. The negative rotation of the tilting table causes the positive tool tilting relative to the rotational axis. +
+ + Rotation axis
+ + +
Generally, the first rotational axis is the axis of rotation around the spindle direction. E.g. when the spindle direction of the Table-Table machine is parallel to the Z-axis, the first rotational axis has to be axis of the rotation around the Z-axis. The following parameters have to be defined:
spindle_direction = 0.0000 0.0000 1.0000 rotate_axis_dir1 = 0.0000 0.0000 -1.0000
The rotate_axis_dir1 parameter defines the positive direction of the rotational axis. The direction is determined with the right hand rule according to the positive direction of the rotation of the CNC-machine part performing the rotation. In this case, the positive direction of the rotary table rotation is clockwise. Therefore, using the right hand rule, the axis direction is the negative Z-direction (0, 0, -1).
747
The first and the second rotational axis depend on the CNC-machine kinematic type:
Table-Table
In this case, the first rotational axis performing the rotation around the spindle axis is mounted on the second rotational axis. The second rotational axis is mounted on the CNC-machine table.
Spindle direction Second rotation axis First rotation axis
Head-Table
Spindle direction
In this case, the first rotational axis Second rotation axis performing the rotation around the spindle axis is mounted on the table. The second rotational axis is mounted on the head of the CNC- First rotation axis machine.
748
10. Simulation
Head-Head
In this case, the first rotational axis performing the rotation around the spindle axis is mounted on the CNC-machine head. The second rotational axis is mounted on the first rotational axis.
Spindle direction
When the rotate_axis_dir1 and rotate_axis_dir2 parameters are not specified in the MAC file, SolidCAM uses the following default values:
rotate_axis_dir1 = 0.0000 0.0000 -1.0000 rotate_axis_dir2 = 0.0000 -1.0000 0.0000
Rotational axes names The first_rot_axis_name and second_rot_axis_name parameters enable you to define the names of the rotational axes that will be used in the Machine simulation.
Example:
first_rot_axis_name = C second_rot_axis_name = B
When the first_rot_axis_name and second_rot_axis_name parameters are not specified in the MAC file, SolidCAM uses the following default values:
first_rot_axis_name = C second_rot_axis_name = B
749
GCode output in machine/part coordinates The gcode_part_coordinate parameter enables you to choose either CAM-Part or CNCmachine Coordinate System to be used for the GCode output. This parameter influences the orientation of the Coordinate System axes when the part rotation is performed. When the gcode_part_coordinate option is activated (the value is Y), the GCode is generated using the CAM-Part Coordinate System. When the part is rotated, the CAM-Part Coordinate System is rotated together with the part, therefore the coordinates of any point on the part are always the same, regardless of the part rotation.
X1,Y1,Z1 Z X Y
Z Y X
X1,Y1,Z1
When the gcode_part_coordinate option is not activated (the value is N), the GCode is generated using the CNC-machine Coordinate System. This coordinate system is fixed and not rotated with the part, therefore the coordinates of the part points are changed when the part is rotated.
X1,Y1,Z1
X2,Y2,Z2
Z X
Z X
750
10. Simulation
Example:
gcode_part_coordinate = Y
When the gcode_part_coordinate parameter is not specified in the MAC file, SolidCAM uses the following default value:
gcode_part_coordinate = N
Base points of rotational axes Using the rot_axis_base_pnt1 and rot_axis_base_pnt2 variables, SolidCAM enables you to define the base points of the first and the second rotational axes. The base points define the location of the rotational axes relative to the CNC-machine origin.
Example:
rot_axis_base_pnt1 = 0.0000 0.0000 0.0000, 0.0000 0.0000 0.0000 rot_axis_base_pnt2 = 0.0000 0.0000 -254.0000, 0.0000 0.0000 -10.0000
The first three numbers define the XYZ location of the base point for Metric settings; the last three numbers define the XYZ location of the base point for Inch settings. The Metric and Inch settings are divided by comma Generally, for Table-Table and Head-Table CNC-machines, the origin point is located in the intersection of the first rotational axis and the top face of the table. In this case, the location of the base point of the first rotational axis is (0,0,0).
Second rotation axis First rotation axis Second rotation axis First rotation axis Origin
Z X X Y
Origin
Z Y
751
The rot_axis_base_pnt2 defines the location of the base point of the second rotational axis. For CNC-machines of the Head-Head type, the definition of the base points is different. For this type of CNC-machines, the origin point is generally located on the bottom spindle face in the intersection with the spindle axis. The distances for the base point of the second rotational axis are measured from this origin point. The distance for the base point of the first rotational axis is measured from the base point of the second rotational axis. First rotation axis
rot_axis_base_pnt2 dened relative to the origin Second rotation axis Second base point Origin X First base point Y rot_axis_base_pnt1 dened relative to rot_axis_base_pnt2
Origin
When the rot_axis_base_pnt1 and rot_axis_base_pnt2 parameters are not specified in the MAC file, SolidCAM uses the following default values:
rot_axis_base_pnt1 = 0.0000 0.0000 0.0000, 0.0000 0.0000 0.0000 rot_axis_base_pnt2 = 0.0000 0.0000 0.0000, 0.0000 0.0000 0.0000
Translation axis limits The trans_axis_min_limit and trans_axis_max_limit parameters enable you to define the limits of linear (translational) movements along the XYZ axes.
Example:
752
10. Simulation
The limits are defined relative to the origin point. Using these limits you can define a virtual 3D box of the working area of the CNC-machine.
trans_axis_max_limit
Origin
Y X
When the trans_axis_min_limit and trans_axis_max_limit parameters are not specified in the MAC file, SolidCAM uses the following default values:
trans_axis_min_limit = -100000.0000 -100000.0000 -100000.0000 trans_axis_max_limit = 100000.0000 100000.0000 100000.0000
753
Rotational axis limits The rot_axis_min_limit0 and rot_axis_max_limit0 parameters enable you to limit the rotation around the first rotational axis. The rot_axis_min_limit1 and rot_axis_ max_limit1 parameters enable you to limit the rotation around the second rotational axis. The parameter value defines the limit rotation angle in degrees.
rot_axis_min_limit0 Second rotation axis
rot_axis_max_limit0
rot_axis_min_limit1
When these parameters are not specified in the MAC file, SolidCAM uses the following default values:
rot_axis_min_limit0 = -100000.0000 rot_axis_min_limit1 = -100000.0000 rot_axis_max_limit0 = 100000.0000 rot_axis_max_limit1 = -100000.0000 754
10. Simulation
Coordinate output parameters These parameters have effect on the coordinate output in GCode, when the GCode is generated using the CNC-Machine coordinate system (gcode_part_coordinate = Y). Use H Length (use_tool_h_length) This parameter enables you to consider the tool H Length value in the coordinate output.
Example: use_tool_h_length =
When this option is not activated (the value is set to N), the H Length is not considered for the coordinate output in the GCode; in this case the tool path output is performed for the tool tip. When this option is activated (the value is set to Y), the specified H Length value is considered for the coordinate output in the GCode; in this case the coordinate output is performed for the origin point, located on the bottom spindle face, at the intersection with the spindle axis.
Tool tip
H Length Origin
When the use_tool_h_length parameter is not specified in the MAC file, SolidCAM uses the following default value:
use_tool_h_length = Y
755
Use shifting (use_part_shifting) This parameter enables you to consider the shifting of the CAM-Part Coordinate system, relative to the CNC-Machine Coordinate system, when generating the coordinate output.
Example: use_part_shifting =
When this option is not activated (the value is set to N), the specified shifting is not considered for the coordinate output in the GCode; the tool path output is performed relative to the CAM-Part Coordinate System.
756
10. Simulation
When this option is activated (the value is set to Y), the shifting defined by the Center of Rot. Origin based on Machine Home parameter in the CoordSys Data dialog box (see topic 2.2.7) is considered for the coordinate output in the GCode. The tool path output is performed relative to the CNC-machine Coordinate System.
When the use_part_shifting parameter is not specified in the MAC file, SolidCAM uses the following default value:
use_part_shifting = Y
757
These parameters enable you to consider the base points of the rotational axes, when generating the coordinate output.
Example: use_rot_axis_base_point1
= =
Y Y
use_rot_axis_base_point2
When this option is not activated (the value is set to N), the base point coordinates are not considered in the calculation. In this case the tool path output is performed either for the tool tip (if the use_tool_h_length option is not activated) or for the origin point located on the bottom spindle face, at the intersection with the spindle axis (if the use_tool_h_length option is activated). When the option is activated (the value is set to Y), the base point coordinates, defined by the rot_axis_base_pnt1/rot_axis_base_pnt2 parameters, are considered during the tool path calculation. In this case the tool path output is performed for the CNC-machine base points defined by the rot_axis_base_pnt1/rot_axis_ base_pnt2 parameters. When the use_rot_axis_base_pnt1/use_rot_axis_base_pnt2 parameters are not specified in the MAC file, SolidCAM uses the following default value:
use_rot_axis_base_point1 use_rot_axis_base_point2 = = Y Y 758
10. Simulation
Machine simulation The machine_simulation parameter enables you to define the name of the CNC-machine model used for the Machine simulation.
Example:
machine_simulation = 5AxDMU50ev
The parameter value defines the folder where the appropriate model of the CNC-machine is stored. This folder is located in the Directory for Machine simulation definitions defined in the Machine simulation settings. Consider that the Directory for Machine simulation definitions is the following:
C:\Program Files\SolidCAM2009\Tables\Metric\MachSim
In this case, the data of the CNC-machine 5AxDMU50ev mentioned in the example above is located in the following folder:
C:\Program Files\SolidCAM2009\Tables\Metric\MachSim\5AxDMU50ev
Example of CNC-machine definition The following example is the section of a CNC-machine definition file. This section defines the parameters of the Okuma CNC-machine used for the Sim. 5 Axis machining and Machine simulation.
;Sim Five axis kinematic_type = TABLE_TABLE spindle_direction = 0.0000 0.0000 1.0000 rotate_axis_dir1 = 0.0000 0.0000 -1.0000 rotate_axis_dir2 = 0.0000 -1.0000 0.0000 rot_axis_base_pnt1 = 0.000 0.000 -15.398, 0.000 0.000 -6.000 rot_axis_base_pnt2 = 0.000 0.000 -100.353, 0.000 0.000 0.000 abs_machine_coord = N first_rot_axis_name = C second_rot_axis_name = B rot_axis_min_limit0 = -100000.0000 rot_axis_min_limit1 = -20.0000 rot_axis_max_limit0 = 1000.0000 rot_axis_max_limit1 = 130.0000 machine_simulation = okuma12
759
Each STL file has to be created using an output coordinate system located at the CNC-machine origin. If the coordinate system of your CNC-machine assembly is different, you have to define an additional coordinate system with the proper location and axes orientation.
760
10. Simulation
In the case of the Table-Table machine shown above, you have to define a new coordinate system located in the intersection of the top face of the table and the rotational axis (CNC-machine origin).
When the coordinate system is defined, move all the components into their initial state (the components performing rotational axes movements have to be placed into their initial state at C=0, B=0; the components performing translational axes movements have to be placed at X=0, Y=0, Z=0).
761
After the coordinate system is defined and all the CNC-machine components are placed into their initial state, the CNC-machine model has to be exported into the STL format. Click File, Save As. The Save As dialog box is displayed.
Choose the STL type for export of the model. Click on the Options button to define the additional parameters of export. The Export Options dialog box is displayed.
SolidWorks Help
This dialog box enables you to define a number of parameters affecting the STL export. See for detailed explanation on these parameters.
Adjust the STL Resolution parameters according to your needs. In the Output coordinate system list, choose the defined Coordinate system for the STL export.
762
10. Simulation
Select the Do not translate STL output data to positive space check box. This option ensures that exported parts maintain their original position in global space, relative to the origin.
Confirm the Export Options dialog box with the OK button. In the Save As dialog box, choose the location for the STL files and enter the name of the STL file for the CNC-machine assembly. Confirm the export with the Save button. Several separate STL files for all the CNC-machine assembly components are generated. All of these files will be used at the further stages of the CNC-machine definition. A CNC-machine model consists of a number of components. It is recommended to try to define the CNC-machine with the minimum number of STL files. To reduce the number of STL files, you can put several components together in one sub-assembly that is exported into a single STL file; the criterion for putting several components into one STL file is the common movement of these components. When assembly components always move together, they can be combined into a sub-assembly. For example, the model of the spindle unit of a Table-Table CNC-machine consists of a number of components that have a common movement; according to the criterion above, all these spindle unit components can be combined into a sub-assembly. Such sub-assemblies can be exported separately into STL files using the Save all components of an assembly in a single file option in the Export Options dialog box. This option creates a single STL file with all the components of a sub-assembly. Before the export of a sub-assembly, the new coordinate system has to be defined in the sub-assembly in the location of the CNC-machine origin.
763
Starting the CNC-machine definition Load a CAM-Part that contains Sim. 5 Axis operations. Start the Machine simulation of a Sim. 5 Axis operation. In the simulation menu, click Settings and choose Machine from the Windows submenu.
The Machine tab is displayed. This tab enables you to define a new CNC-machine. Click on the New Machine definition is created. button. A new CNC-machine
In the XML folder located in the directory that is defined in the Directory for Machine simulation definition section of Machine simulation settings, create a new folder with the name of your CNC-machine; this Machine definition folder is the location of all files related to the CNC-machine definition. The name of this folder has to be assigned to the machine_simulation parameter in the MAC file of the CNC-machine. button to save the empty Click on the Save Machine As machine definition. The Save As dialog box is displayed. The machine definition is saved as an XML file. Choose the Machine definition folder and save the machine definition file with the CNC-machine name (the name assigned to the machine_simulation parameter in the MAC file). Confirm the dialog box with the Save button.
764
10. Simulation
Copy all the STL files generated from the CNC-machine model into the Machine definition folder. At this stage, the initial CNC-machine definition is finished. Click on the Edit Machine to start the definition of the CNC-machine components. Defining the name of the CNC-machine Right-click on the root item of the CNC-machine definition tree and choose the Properties command. The Element properties dialog box is displayed. In the ID field, enter the name of the CNC-machine and confirm the dialog box with the OK button. button
Understanding the structure of the CNC-machine Before defining your CNC-machine components, you have to analyze the machine kinematics. Generally, all the components of the CNC-machine can be classified into two groups: non-moving components and moving components. The first group includes the CNC-machine base, controller, doors, etc. The moving parts are the components of the transitional and rotational axes and the spindle unit. In case of Table-Table machines, the base is a nonmoving component.
Moving components
765
All the moving components can be classified according to the dependency of the movements. For example, in the Table-Table CNC-machine the rotary table that provides the rotation around the vertical axis (C-axis) is mounted on the tilting table. The tilting table that provides the rotation around the X-axis (B-axis), is mounted on the saddle. The saddle performs the X-axis movements. Movement of the saddle affects the location of the B-axis and C-axis (the tilting and rotary tables are moved). Movement of the tilting table (rotation around B-axis) affects the orientation of the C-axis (the rotary table is moved together with the tilting table), but does not affect the X-axis. The rotary table movement (rotation around C-axis) does not affect the B-axis and X-axis orientation.
Saddle Tilting table Rotary table
Hierarchically, we can describe the structure of the rotary table, tilting table and saddle using parents-children relations. The saddle is the parent of the tilting table because the tilting table (child) is mounted on the saddle. Similarly, the tilting table is the parent of the rotary table because the rotary table is mounted on the tilting table. Another separate set of the CNC-machine components provides the movements in the YZ-plane. The sliding carriage provides movements along the Y-axis, and the spindle unit performs the Z-axis movements. In this hierarchy the sliding carriage is a parent and the spindle unit is a child.
Sliding carriage
Spindle unit
766
10. Simulation
The structure of a Head-Table CNC-machine can be described by two separate sets of components. The components of these sets are combined together according to the parents-children criterion. The first set consists of the tilting head with the spindle unit (B-axis) mounted on the vertical saddle (Z-axis). The vertical saddle is mounted on the horizontal saddle (X-axis).
Horizontal saddle
The second set consists of the rotary table (C-axis) mounted on the sliding carriage (Y-axis).
Rotary table
Sliding carriage
767
The table of a Head-Head CNC-machine is a non-moving component mounted on the base. The moving parts are described by the following parents-children hierarchy. The tilting spindle unit (B-axis) is mounted on the rotary head (C-axis). The rotary head is mounted on the saddle performing movements in the YZ-plane. The saddle is mounted on the column (X-axis).
Column Saddle Table Base
The CNC-machine has to be defined according to the parents-children relations between the CNC-machine components; these relations determine the order of the components definition and dependencies between them. Defining the CNC-machine housing At the first stage of the CNC-machine definition, you have to define the non-moving components of the machine such as housing. In the Machine tab, right-click on the root item of the CNCmachine definition tree and choose the Add Geometry command from the list. The Element properties dialog box is displayed. In the ID field of the dialog box, specify the name of the housing component.
768
10. Simulation
When the mh_ prefix appears in the ID of a CNC-machine component, this component is considered as a housing part. The components defined with this prefix can be hidden during the simulation using the Show/Hide machine housing button. In this case, the ID value is set to mh_Housing. Click on the Browse button and choose the STL model of the housing located in the Machine definition folder.
Switch to the Display tab. This tab enables you to control the CNC-machine component name display in the CNC-machine definition tree.
The component ID is always displayed in the tree. SolidCAM enables you to optionally display the STL file name chosen for the specific component by selecting the File name check box. Switch to the Appearance tab. This tab enables you to control over the visibility and the visual properties (color, transparency, reflectivity) of the component of the CNC-machine.
769
Choose the appropriate settings for the housing component and confirm the Element properties dialog box with the OK button. The housing part is displayed in the graphic area and the housing component name is displayed in the CNC-machine definition tree.
Click on the
button and save the machine definition in the previously created XML file.
All the additional non-moving components are defined in the same manner. When this stage is finished, you have to start the definition of the moving components of the CNC-machine. Defining the translational axis When all the non-moving components of the CNC-machine are defined, you have to define the moving components. Moving components have to be defined according to their parents-children dependencies. The order of the definition is the following: parents have to be defined before the children. In case of Table-Table machines, the first component to be defined is the saddle performing the Y-axis translational movements.
770
10. Simulation
Right-click on the CNC-machine name in the definition tree and choose the Add Transl. axis command from the menu. The Element properties dialog box is displayed. Set the translational axis name in the ID field. Use the following built-in ID names: For the X-axis (linear axis), the ID is X; For the Y-axis (linear axis), the ID is Y; For the Z-axis (linear axis), the ID is Z; For the A-axis (rotational axis), the ID is A; For the B-axis (rotational axis), the ID is B; For the C-axis (rotational axis), the ID is C.
Switch to the Display tab. This tab enables you to choose the information that will be displayed in the CNC-machine definition tree.
771
The component ID is always displayed in the tree. SolidCAM enables you to optionally display the translational axis direction (the Direction check box) and limits of movements (the Limits check box). Switch to the Transformation tab. This tab enables you to define the orientation of the axis by defining a vector with three coordinates.
In this case, the defined translational axis is the Y-axis. Note that the direction is defined according to the tool movements along the axis. The tool movement in the positive Y-axis direction causes the saddle movement in the negative Y-direction.
Z X
Therefore, the direction is defined with the following values: 0.00000 -1.00000 0.00000. This vector defines the direction of the CNC component movement when the tool moves in the positive axis direction.
772
10. Simulation
Switch to the Limits tab. This tab enables you to define the limit of the translational movements along the axis. In this tab, you have to specify the Min Limit and Max Limit values. The movement of the saddle that performs the Y-axis movements is limited between this values. In this case, the Min Limit is -350 and Max Limit is 350.
The defined Min Limit and Max Limit values must be the same as those defined in the Y-coordinate of the trans_axis_min_limit and trans_axis_max_limit parameters specified in the MAC file of the CNC-machine. When the limits are defined, click on the OK button to confirm the axis definition. When the translational axis parameters are defined, specify the geometry of the part performing the translational movement along the axis. In this case, this part is the saddle. In the CNC-machine definition tree, right-click on the just defined axis item and choose Add Geometry from the menu. The Element properties dialog box is displayed.
773
In the same manner as described in the Defining the CNC-machine housing section, specify the geometry name and choose the STL model of the necessary component (saddle).
Confirm the Element properties dialog box with the OK button. The saddle model is displayed in the graphic area.
Use the sliders of the Axis Control tab to check the translational movements of the defined geometry along the axis. Click on the button and save the machine definition in the previously created XML file.
774
10. Simulation
Defining the rotational axis Defining the tilting table At this stage, you have to define the tilting table providing the B-axis rotation. In the CNC-machine definition tree, right-click on the Y-axis item and choose the Add Rot. Axis command from the menu. The Element properties dialog box is displayed. Define the ID of the rotational axis. Type B in the ID field.
Switch to the Transformation tab. This tab enables you to define the Direction of the rotational axis and the Center point. These parameters determine the location and orientation of the rotational axis.
775
The tilting axis performs the rotation around the X-axis. Note that the positive tool movement around the rotational axis (positive direction of the B-axis) is performed by the negative rotation of the tilting table. The positive direction of the rotational axis of the tilting table is defined by the right hand rule. Therefore the axis Direction parameters values are the following: -1.00000 0.00000 0.00000.
+ +
Z X
The axis direction has to be defined according to the axis direction defined in the rotate_axis_dir2 parameter in the MAC file. The Center point parameters define the location of the axis relative to the CNC-machine origin. This parameter has to be defined according to the rot_axis_base_pnt2 parameter in the MAC file. In this case, the tilting axis is located 30 mm below the table. Therefore, the Center point values must be defined as follows: 0.00000 0.00000 -30.00000. Switch to the Limits tab. This tab enables you to define the minimum and maximum rotation angle limits. For the tilting axis, the Min Limit value is -100, the Max Limit value is 100.
The defined Min Limit and Max Limit values have to be the same as the rot_axis_ min_limit1 and rot_axis_max_limit1 values specified in the MAC file of the CNC-machine. At this stage, the rotational axis is defined. Confirm the Element properties dialog box with the OK button.
776
10. Simulation
Define the geometry of the tilting table. In the CNC-machine definition tree, right-click on the just defined rotational axis item and choose the Add Geometry command from the menu. The Elements properties dialog box is displayed. In the same manner as described in the Defining the CNC-machine housing section, set the ID for the tilting table geometry and choose the geometry from the STL file.
Use the sliders of the Axis Control tab to check the translational movements of the defined geometry along the axis. Click on the file.
777
button and save the machine definition in the previously created XML
Defining the rotary table At this stage, you have to define the rotary table that provides the C-axis rotation. In the CNC-machine definition tree, right-click on the B-axis item and choose the Add Rot. Axis command from the menu. The Element properties dialog box is displayed. Define the ID of the rotational axis. Type C in the ID field.
Switch to the Transformation tab. The rotary axis performs the rotation around the Z-axis. Note that the positive tool rotation around the rotational axis (positive direction of the C-axis) is performed by the negative rotation of the rotary table; the positive direction of the rotational axis of the rotary table is defined by the right hand rule. Therefore the axis Direction parameters values are the following: 0.00000 0.00000 -1.00000.
The axis direction has to be defined according to the axis direction defined in the
778
10. Simulation
The Center point parameters define the location of the axis relative to the CNCmachine origin. This parameter has to be defined according to the rot_axis_base_pnt1 parameter in the MAC file. The rotation B-axis passes through the CNC-machine origin. Therefore, the Center point has to be defined with the following values: 0.00000 0.00000 0.00000. Switch to the Limits tab. This tab enables you to define the minimum and maximum rotation angle limits. For the C-axis, the Min Limit value is -1000, the Max Limit value is 1000.
The defined Min Limit and Max Limit values have to be the same as the rot_axis_min_limit0 and rot_axis_max_limit0 values specified in the MAC file of the CNC-machine. At this stage, the rotational axis is defined. Confirm the Element properties dialog box with the OK button. Define the geometry of the rotary table. In the CNC-machine definition tree, right-click on the just defined C-axis item and choose the Add Geometry command from the menu. The Element properties dialog box is displayed.
779
In the same manner as explained in the Defining the CNC-machine housing section, set the ID for the rotary table geometry and choose the geometry from the STL file.
Use the sliders of the Axis Control tab to check the translational movements of the defined geometry along the axis. Click on the file. button and save the machine definition in the previously created XML
780
10. Simulation
Defining the translational axis At this stage, you have to define the sliding carriage that performs the X-axis movements and the spindle unit that moves along the Z-axis. These two components are joined into a separate set; the movements of this set are independent from the movements of Y-, B- and C-axes. Right-click on the root item in the CNC-machine definition tree and choose the Add Transl. Axis command from the menu. Define the X-axis, the proper axis ID and Direction. Set the following limits for the axis: the Min Limit value to -380 and the Max Limit value to 380. The defined Min Limit and Max Limit values have to be the same as those defined in the X-coordinate of the trans_axis_min_limit and trans_axis_max_limit parameters specified in the MAC file of the CNC-machine. Define the geometry for the X-axis. Choose the STL model of the sliding carriage.
Use the sliders of the Axis Control tab to check the translational movements of the defined geometry along the axis. Click on the button and save the machine definition in the previously created XML file.
781
Define the Z-axis. Note that the Z-axis is a child of the X-axis. Define the proper axis ID and Direction. Set the following limits for the Z-axis: set the Min Limit value to 0 and the Max Limit value to 300. The defined Min Limit and Max Limit values have to be the same as those defined in the Z-coordinate of the trans_axis_min_limit and trans_axis_max_limit parameters specified in the MAC file of the CNC-machine. Define the geometry for the Z-axis. Choose the STL model of the spindle unit.
Use the sliders of the Axis Control tab to check the translational movements of the defined geometry along the axis. Click on the button and save the machine definition in the previously created XML file.
782
10. Simulation
At this stage, the definition of the CNC-machine components is finished. The related parameters of the MAC file for this machine are listed below:
;Sim Five axis kinematic_type = TABLE_TABLE_new = 0.0000 0.0000 1.0000 = 0.0000 0.0000 -1.0000 = -1.0000 0.0000 0.0000 spindle_direction rotate_axis_dir1 rotate_axis_dir2 rot_axis_base_pnt1 0.0000 rot_axis_base_pnt2 -1.1811 first_rot_axis_name machine_simulation use_machine_limits
= 0.0000 0.0000 0.0000, 0.0000 0.0000 = 0.0000 0.0000 -30.0000, 0.0000 0.0000 = N
abs_machine_coord = C second_rot_axis_name = B
= table_table = Y
trans_axis_min_limit = -380.0000 -350.0000 0.0000 trans_axis_max_limit = 380.0000 350.0000 300.0000 rot_axis_min_limit0 = -1000.0000 rot_axis_min_limit1 = -100.0000 rot_axis_max_limit0 = 1000.0000 rot_axis_max_limit1 = 100.0000
At the next stages, you have to define the default workpiece, stock and tool that will be used for this machine. These defaults enable you to define the kinematic relationship between the CNCmachine components and workpiece, stock and tool. During the simulation, these defaults will be overwritten with the actual CAM-Part data.
783
Defining the workpiece At this stage, you have to define the default workpiece and its kinematic relationship with the CNC-machine components. The workpiece is located on the CNC-machine rotary table (C-axis). In the CNC-machine definition tree, right-click on the C-axis item and choose the Add Coord. Transform command from the menu. This command enables you to define the kinematic relationship between the workpiece and the CNCmachine components. The Element properties dialog box is displayed. Define the ID of the workpiece. Use the built-in workpiece_transform name for the ID. This name is hard-coded in SolidCAM and cannot be changed.
Confirm the dialog box with the OK button. The appropriate item is displayed in the CNC-machine definition tree. Now you have to define the default model of the workpiece. Right-click on the just added Transform item in the CNCmachine definition tree and choose the Add Workpiece command from the menu. The Element properties dialog box is displayed.
784
10. Simulation
Set the ID of the workpiece geometry. Use the built-in werkstueck name for the ID. This name is hard-coded in SolidCAM and cannot be changed. Confirm the dialog box with the OK button. The workpiece geometry with the builtin name werkstueck is related to the werkstueck.stl file. In the process of the CNCmachine definition this file does not exist. It will be automatically created during the simulation. Every time during the simulation this file will be overwritten with the actual target model data. Click on the button and save the machine definition in the previously created XML file. Defining the stock At this stage, you have to define the default stock and its kinematic relationship with the CNCmachine components. Similar to the workpiece, the stock is located on the CNC-machine rotary table (C-axis). All the coordinate transformations are the same for the workpiece and the stock. Therefore, you do not need to define a separate coordinate transformation for the stock. Use the existing transformation of the workpiece. In the CNC-machine definition tree, right-click on the workpiece_transform coordinate transformation item and choose the Add Stock command from the menu. This command enables you to define the geometry of the stock. The Element properties dialog box is displayed.
785
Define the ID of the stock geometry. Use the built-in name Stock for the ID definition. This name is hard-coded in SolidCAM and cannot be changed.
Confirm the dialog box with the OK button. The stock geometry with the built-in name Stock is related to the stock.stl file. In the process of the CNC-machine definition this file does not exist. It will be automatically created during the simulation. Every time during the simulation this file will be overwritten with the actual stock model data. Click on the button and save the machine definition in the previously created XML file.
Defining the fixture At this stage, you have to define the fixture and its kinematic relationship with the CNC-machine components. Since the fixture is clamping the workpiece on the CNCMachine table and these components are always moving together, all the coordinate transformations are the same for workpiece and fixture. Therefore, you do not need to define a separate coordinate transformation for the fixture. Use the existing transformation of the workpiece. The fixture definition should be added to the CNC-Machine definition tree under the workpiece_transform item. In the CNC-machine definition tree, right-click on the workpiece_transform coordinate transformation item and choose the Add Geometry command from the menu. This command enables you to define the geometry of the fixture.
786
10. Simulation
The Element properties dialog box is displayed. Define the ID of the fixture geometry. Use the built-in name Fixture for the ID definition. This name is hardcoded in SolidCAM and cannot be changed. Click on the Browse button and choose the fixture. file containing the fixture model from the CNCmachine folder. During the specific part simulation, this file will be overwritten with the STL file of the actual fixture used in the CAM-Part.
stl
If you have no fixture.stl file, you can create it by copying and renaming any other *.stl file. In this case, the content of the STL file is not important, because it will be overwritten with the relevant data during the simulation for every CAM-Part. Defining the tool path The tool path is located around the workpiece. When the workpiece is rotated to a new orientation, the tool path has to be rotated together with the workpiece. All the coordinate transformations are the same for workpiece and tool path. Therefore, you do not need to define a separate coordinate transformation for the tool path. Use the existing transformation of the workpiece. In the CNC-machine definition tree, right-click on the workpiece_transform coordinate transformation item and choose the Add Toolpath command from the menu. This command enables you to define the geometry of the stock. The Element properties dialog box is displayed.
787
Define the ID of the stock geometry. Use the built-in name Toolpath for the ID definition. This name is hard-coded in SolidCAM and cannot be changed.
Confirm the dialog box with the OK button. The tool path geometry with the built-in name Toolpath is related to the file. In the process of the CNC-machine definition this file does not exist. It will be automatically created during the simulation. Every time during the simulation this file will be overwritten with the actual tool path.
toolpath.asc
Click on the
button and save the machine definition in the previously created XML file.
Defining the tool At this stage, you have to define the default tool and its kinematic relationship with the CNC-machine components. The tool with holder is mounted on the CNC-machine spindle unit (Z-axis). In the CNC-machine definition tree, right-click on the Z-axis item and choose the Add Coord. Transform command from the menu. This command enables you to define the kinematic relationship between the tool and the CNC-machine components. The Element properties dialog box is displayed.
788
10. Simulation
Define the ID of the tool. Use the built-in holder_transform name for the ID. This name is hardcoded in SolidCAM and cannot be changed.
Confirm the dialog box with the OK button. The appropriate item is displayed in the CNC-machine definition tree. Now you have to define the default model of the tool. Rightclick on the just added item in the CNC-machine definition tree and choose the Add Tool command from the menu. The Element properties dialog box is displayed. Set the ID of the tool geometry. Use the built-in Tool name for the ID. This name is hard-coded in SolidCAM and cannot be changed.
Confirm the dialog box with the OK button. The tool geometry with the built-in name Tool is related to the tool.stl file. In the process of the CNC-machine definition this file does not exist. It will be automatically created during the simulation. Every time during the simulation this file will be overwritten with the actual tool data. Click on the
789
button and save the machine definition in the previously created XML file.
Collision control This functionality enables you to detect and avoid possible collisions between all components of the CNC-machine in the process of machining. The understanding of the CNC-machine construction and kinematics is necessary for the collision definition. In case of Table-Table CNCmachines definition, the machine construction precludes the collisions between the saddle part and the tilting and rotary tables. The collisions between the sliding carriage and saddle are also precluded by the CNC-machine construction and kinematics. There is no necessity to check the CNC-machine components during their movements for such collisions. The collisions between spindle unit (with tool holder and tool) and saddle (with mounted tilting table and rotary table) are possible. Such collisions have to be detected and avoided. In the CNC-machine definition tree, right-click on the root item and choose the Add CollCheck command from the menu. The Element properties dialog box is displayed. Switch to the Collcheck Group tab.
This tab enables you to define two groups of CNC-machine components for which the collision checking will be performed.
790
10. Simulation
Select the necessary component in the Geometry Pool area and click on the
selected component into a group. To remove a component from the group, click on the
When a group contains components that are different for different CAM-Parts (workpiece, tool) you have to mark such group as Dynamic. The group containing only components that are independent from CAM-Parts, has to be marked as Static.
The tool and spindle unit components should be included in the first group. The saddle, tilting table, rotary table and workpiece components should be included into the second group. The collision checking will be performed between the components of two groups. Confirm the dialog box with the OK button. Use the sliders of the Axis Control tab to check the collision checking definition. When a collision is detected, the contacting components are highlighted.
Click on the
button and save the machine definition in the previously created XML file.
791
Defining the coordinate transformation In some cases, the CNC-machine spindle is not aligned in the positive Z-axis direction. For example, an angular attachment enables you to transform the vertical spindle rotation (around the Z-axis) into the horizontal rotation (around the Y-axis). In this case, the Z-axis of the spindle unit is not parallel to the default main spindle direction. In the illustration below, the default XYZ coordinates describe the main spindle direction (coordinate system of the CNC-machine). The XYZ coordinate system describes the angular attachment. These coordinate systems have different axes orientations.
Z'X'Z+ Y'X'+ Z'+
Y'+
YX-
X+ Y+
Z-
The coordinate transformation between the default coordinate system and the spindle coordinate system has to be performed in order to enable correct execution of the tool path by the tool mounted in the spindle unit. To perform the necessary coordinate transformation, you have to add a new Coordinate transformation (Coord. Transform) item into the CNC-machine definition tree. Hierarchically, this item has to be parent to the holder_transform item. The ID of this Coordinate Transformation item is not important. Use the spindle_transform name for the ID definition. The Transformation tab of the Element properties dialog box contains a transformation matrix for the spindle_transform item.
792
10. Simulation
Using this matrix, you can define the transformation of the coordinate system. In other words, you can define the orientation and location of a transformed coordinate system relative (XYZ) to the coordinate system of the CNC-machine (XYZ). The columns of this matrix describe the axis orientation of the CNC-machine coordinate system relative to the transformed coordinate system. The first column enables you to define the direction of the X-axis; the second column defines the Y-axis and the third column defines the Z-axis. The fourth column defines the offset of the transformed coordinate system origin relative to the CNCmachine coordinate system origin. The rows of the matrix define the orientation of the transformed coordinate system relative to the CNC-machine coordinate system. The first row enables you to define the direction of the X-axis; the second row defines the Y-axis and the third row defines the Z-axis. The fourth row is not used. By default, the diagonal of the transformation matrix is filled with 1. This means that the initial coordinate system of the CNC-machine and the transformed coordinate system are the same and coordinate transformation is not performed. Such transformation matrixes were used for the workpiece_transform and holder_transform definition. In case a transformation is required, you have to fill the transformation matrix. The transformed coordinate system for the angular attachment discussed before is obtained by the 90 rotation of the CNC-machine coordinate system around the X-axis. Z+ Y'-
Y-
X+
Z'-
X'+
XZ-
Y+
X'Y'+
Z'+
793
Z(Y'=-1) X(X'=+1) X'(X=+1) Z'(Y=+1) Y'(Z=-1) CNC-machine coordinate system Transformed coordinate system
Y(Z'=+1)
XML file structure This topic describes the XML file structure using the Table-Table CNC-machine definition example. The XML-based definition of a CNC-machine consists of several commands (tags), each of them describes the specific item of the CNC-machine definition tree. Each tag is enclosed between the < and > signs.
Example:
<machine_definition>
Some XML constructions consist of opening and closing tags; the closing tag starts from the / symbol.
794
10. Simulation
Example:
For some tags, opening and closing can be performed in the single tag.
Example:
name=Table_table;
here name is the variable name and Table_table is the value. The value must be enclosed in quotation marks. The automatically generated XML file is the following: The order of the commands (tags) of the XML file is the same as the order of the CNC-machine components in the CNC-machine definition tree.
<?xml version=1.0 encoding=iso-8859-1 ?>
This string is similar for each XML file; it describes the used version of XML format and encoding.
<machine_definition>
This tag defines the name of the CNC-machine and the used units.
<axis id=X type=translation x=1.00000000 y=0.00000000 z=0.00000000 minvalue=-380.000000 maxvalue=380.000000>
This tag starts the X-axis definition. The <axis> tag enables you to define the type of the axis (translational/rotational), axis orientation and limits.
<geometry name=Sliding carriage geo=table_table-x_axis-1.stl clrr=0.00000000 clrg=0.00000000 clrb=1.00000000 alpha=0.0 reflectivity=0.0 objtype=geometry />
795
This tag defines the geometry of the part performing X-axis movements. The name variable defines the geometry ID. The geo variable defines the STL file used for the geometry definition. The clrr, clrg and clrb variables define the RGB components of the geometry color. The values of these parameters have to be in the range from 0 to 1. The alpha variable defines the transparency of the geometry. The reflectivity variable defines the reflectivity of the geometry.
<axis id=Z type=translation x=0.00000000 y=0.00000000 z=1.00000000 minvalue=0.000000 maxvalue=300.000000 > <geometry name=Spindle unit geo=table_table-z_axis-1.stl clrr=0.50196081 clrg=1.00000000 clrb=1.00000000 alpha=0.0 reflectivity=0.0 objtype=geometry />
This tag starts the tool transformation definition. The initialvalue variable defines the used transformation matrix.
<geometry name=tool geo=tool.stl clrr=0.00000000 clrg=1.00000000 clrb=0.00000000 alpha=0.0 reflectivity=0.0 objtype=tool holderr=0.00000000 holderg=1.00000000 holderb=1.00000000 />
This tag defines the geometry of the tool (with the tool holder). The clrr, clrg and clrb variables define the RGB components of the tool color. The holderr, holderg and holderb variables define the RGB components of the tool holder color.
</transform>
10. Simulation <geometry name=saddle geo=table_table-y_axis-1.stl clrr=0.00000000 clrg=0.50196081 clrb=1.00000000 alpha=0.0 reflectivity=0.0 objtype=geometry />
Start B-axis definition. For rotational axes the rzx, rzy and rzz variables define the location of the rotation base point.
<geometry name=tilting table geo=table_table-b_axis-1.stl clrr=1.00000000 clrg=0.50196081 clrb=0.00000000 alpha=0.0 reflectivity=0.0 objtype=geometry />
This tag starts the workpiece transformation definition. The initialvalue variable defines the used transformation matrix.
<geometry name=werkstueck geo=werkstueck.stl clrr=0.00000000 clrg=1.00000000 clrb=0.00000000 alpha=0.0 reflectivity=0.0 objtype=workpiece />
<geometry name=toolpath geo=toolpath.asc clrr=0.80000001 clrg=0.80000001 clrb=0.80000001 alpha=0.0 reflectivity=0.0 objtype=toolpath />
Collision checking definition. The group1 and group2 variables enable you to define groups of CNC-machine components.
</machine_definition>
798
SolidCAM Settings
12
The SolidCAM Settings feature enables you to define a set of SolidCAM defaults such as folders, units, tolerances, CNC-controllers, etc. In the settings dialog box, you can change the path to related applications, units, tolerances, default machines, editors, and color settings for SolidCAM. The Settings register enables you to easily view and edit the current program preferences and options.
User Directories settings Units settings Simulation settings Synchronization settings Rest Material & SolidVerify settings Tool settings
12.1 Introduction
The SolidCAM Settings dialog box enables you to change the path to related applications, units, tolerances, default machines, editors, and color settings for SolidCAM. This dialog box enables you to easily view and edit the current program preferences and options.
Settings
800
12. Settings
801
12.3.2 CNC-controllers
SolidCAM enables you to define the following default machine controllers:
Milling CNC-Controller Turning CNC-Controller Milling&Turning CNC-Controller WireCut CNC-Controller Mill-Turn CNC-Controller
The chosen post-processor will be used as a default machine, which means it will appear in the Milling Part Data dialog box as the controller for a new CAMPart. Naturally, you can change the controller for the CAM-Part with the list field if you want to use another machine controller. 1. Click on the Browse button. A list of post-processors available in your Post-processor files directory will be displayed in the Machines list. 2. Double-click on the machine you want to use as default.
802
12. Settings
12.4.1 Metric/Inch
This option enables you to select the unit system. SolidCAM saves the information about the units in which the CAM-Part was defined in the CAM-Part database. The following rules apply to this new feature: 1. When defining a new CAM-Part, SolidCAM checks both the default Units settings and the units of the SolidWorks model. If these units are different, SolidCAM converts the units of the SolidWorks model according to the CAM Settings. 2. When opening an existing CAM-Part created with SolidCAM, SolidCAM sets the Units settings according to those of the CAM-Part. 3. When opening an existing CAM-Part created with previous SolidCAM releases, SolidCAM works according to the default Units settings and does not save the unit information in the CAM-Part. These rules enable SolidCAM to prevent inconsistency between SolidCAM Units settings, CAM-Part Units and Units of the CAD model.
12.4.2 Approximation
Whenever you use a spline edge (NURBS) to select a chain geometry for profiles, working areas, sections etc., the spline will be transformed to lines. The Spline approximation value defines the tolerance that is used when the spline is transformed into lines.
Example:
When you import an IGES surface, the surface boundaries will usually be defined with spline curves. If you mill the outside contour of the surface with a Profile operation, you have to select the boundary as the profile geometry. You will receive straight edges and facets on the contour if you do not adjust the spline approximation to your requirements. If you select a tighter tolerance, the GCode file will show more points on the contour and produce a smoother edge. This tolerance does not affect operations that work on 2D contours such as arcs, lines or circles.
803
Edit
These tolerances can be defined separately for each geometry in the Geometry dialog box (see topic 4.5).
Constant-Z Tolerance When you work in the Auto Constant Z mode, all connected entities on the same Z-level of the current coordinate system will be selected. This tolerance defines the maximum deviation from the Z plane where an element will still be recognized as being on the same Z-level. The Gap and Constant Z tolerances you should use depend mainly on the size of your geometries and the accuracy of your models or imported 2D/3D files. The default setting can be used for most of the common models, but when you work with very intricate CAM-Parts, for example, a large max. gap tolerance can cause problems as you might close contours in places that should normally be not connected. To avoid this, answer No to the message Do you want to close the gap? and switch to single curve mode to make sure you selected the correct elements.
804
12. Settings
= Part Upper Level + Tool Start Level Delta; = Part Upper Level + Clearance Level Delta;
where the Clearance Level Delta and Tool Start Level Delta are constant values defined in the SolidCAM Settings. The defined values of the Clearance Level Delta and Tool Star Level Delta will be used for the each CoordSys defined by SolidCAM including CoordSys positions automatically defined by SolidCAM AFRM module. Default values:
Metric:
Tool Start Level Delta = 2; Clearance Level Delta = 0.4 SolidCAM have to use round numbers for Tool Start Level and Clearance Level values. SolidCAM enables you to define the number of decimal units for rounding via the Rounding box of the SolidCAM Settings dialog box.
805
The default value of Decimal places for Metric is 0. The default value of Decimal places for Inch is 3.
12.5 Synchronization settings 12.5.1 Synchronization of CAM geometry with design model
Check synchronization always The synchronization check is performed automatically each time you click on the SolidCAM Manager tree. Ask before synchronization check When this check box is selected, after every change in the part or in the assembly and rebuild, SolidCAM will prompt you before checking the synchronization of the geometries with the model or sketches. When this check box is not selected, the synchronization checking will be performed without any message or question. Synchronize automatically This option enables you to perform the synchronization of geometries automatically. When this check box is selected, the synchronization check is performed and then all the unsynchronized operations and geometries are automatically synchronized. When the synchronization fails for certain operations or geometries, SolidCAM marks the operations/geometries with an exclamation mark and deletes the operation tool path; such operations are marked with asterisk. This option is available only when the Check synchronization always check box is selected. Calculate operations after the synchronization This option enables you to perform the calculation of the synchronized operations automatically. When this check box is selected, SolidCAM automatically calculates all the synchronized operations. The operations marked with the exclamation mark are not calculated. This option is available only when the Automatically synchronize geometries check box is selected.
806
12. Settings
Check synchronization on user demand In this case, SolidCAM will not check the synchronization automatically. The Check Synchronization item in the Operation and Geometry menus is enabled and you can choose it to start the synchronization.
807
When this option is active, SolidCAM creates new CAMParts in the compressed mode. Open CAM-Part
This option enables you to define the default file type for the filter in the Open and Delete browser dialog boxes. Close CAM-Part
Convert non-compressed CAM-Parts to compressed mode. When this option is active, each noncompressed CAM-Part loaded into SolidCAM will be converted to compressed mode.
SolidCAM Temporary folder This field displays the current path for the SolidCAM Temporary folder and enables the user to choose a new one. Enter a new path name or choose it with the Browse button. The SolidCAM Temporary folder location cannot be changed when a CAM-Part is opened. Only an existing folder can be defined. Otherwise, the following message will be displayed.
You have to define a new location for the SolidCAM Temporary folder. When opening, SolidCAM checks the existence of the temporary folder and possibility to save files in it (via attributes). If the folder does not exist SolidCAM displays the following message. You have to define a new location for the SolidCAM Temporary folder. If the SolidCAM Temporary folder has attributes that enable file saving (read-only flag), SolidCAM will remove these attributes.
808
12. Settings
files)
If the default folder (C:\Documents and Settings\<user name>\Local Setting\SolidCAM Temporary does not exist, but is chosen in SolidCAM Settings, SolidCAM will create it automatically. Compression factor This option enables you to control the performance and ratio of the compression for compressed CAM-Parts. A higher setting results in slower compression but more compact compressed CAMParts.
809
12.7 Tool Settings 12.7.1 Update Part Tool Table according to Machine Tool Table
By setting this option the user instructs SolidCAM to automatically update the Part Tool Table with tools from the Machine tool table defined in the MAC-file, when the CNC-controller for the CAMPart is changed. Only used tools numbers This option enables you to update only those tools that were used in operations. Tools that were not used will be removed from the Part Tool Table. Used tools that were not found in the Machine Tool Table will be numbered with the next sequential numbers. Renumber tools from 1 when there is no machine tool table The option removes all unused tools from the Part Tool Table. The used tools will be renumbered starting from number 1. If the Renumber tools from 1 when there is no Machine tool table option is not active, SolidCAM removes all unused tools from the Part Tool Table. The used tools will not be renumbered. This option is available only if the Only used tools numbers option is activated and only if the Machine Tool Table is not defined for the MAC of the new CNC-controller.
12. Settings
Diameter This option displays the tool diameter. Type This option displays the tool type.
12.7.5 Set Tool as Permanent when user changes the tool number
The Set Tool to be Permanent when user changes the tool number option enables SolidCAM to automatically make tools Permanent when the Tool Number is changed.
811
Customizable display elements: CoordSys: displays the color of the current Coordinate System. Direction arrow: displays the color of arrows that indicate the direction of a chain geometry. Point: displays the color of points during chain selection, e.g. the start point of an element. Numbers: displays the color of numbers used to identify chain geometries. Section: displays the color of the section geometries. Clamp: displays the color of the clamp in SolidCAM Turning. Show tool: displays the color of the tool shown from the operation dialog box. Open edges: displays the color of the open edge geometry.
812
12. Settings
Pick highlight: highlights selected elements, e.g. surfaces, solids, lines, etc. Show chain/3D model/Drill: displays the color of geometries when you use the Show Geometry command. Chain Accept highlight: displays the color of chains that have been added to the currently active geometry. General chain selection: highlights entities suggested as consequent elements of the chain in auto select mode. Limit/Working area: displays the color of the Limit geometry and Working area geometry. Material boundaries: displays the color of the Material boundaries. Vertical Type Def. Depth: displays the color of numbers used to identify the depth of the vertical type variable profile depth. Sloped Type Def. Depth: displays the color of numbers used to identify the depth of the sloped type variable profile depth. Load default color set This option enables you to load the default colors of SolidCAM. Host CAD background color You can load a pre-defined set of colors for the customizable display elements. These colors have been selected by SolidCAM for the standard background colors of the Host CAD systems used by SolidCAM. Choose the background color of the Host CAD from the list.
The Auto adjust option enables you to load the optimal colors for the background of your Host CAD.
813
814
12. Settings
These settings are used as defaults for each new CAM-Part. During the process of a CAM-Part definition, the settings can be customized for the current CAM-Part with the Interoperational tool movements page of the Part Settings dialog box (see topic 2.10.2). Part Clearance level All the interoperational movements are performed through the Part Clearance level. This is the default option. Operation Start level When two neighboring operations use the same Coordinate System, Tool and Tool offset, the interoperational movement between them is performed through the Operation Start level of the second operation. SolidCAM enables you to change the settings even when a CAM-Part is opened. When you switch to the Operation Start level mode, SolidCAM enables the Start level fields in all the operations and defines the Start levels equal to the Part Clearance level of the related Coordinate Systems. All the interoperational movements will be implemented through the appropriate Start levels. When you switch to the Part Clearance level mode, SolidCAM disables the Start level field in all the operations. All the SolidCAM operations (except for Sim. 5-Axis operations) have to be recalculated. After the recalculation, all the interoperational movements will be implemented through the Part Clearance levels of the appropriate Coordinate Systems.
815
816
12. Settings
These settings are used as default for each new CAM-Part. During the process of a CAM-Part definition, the settings can be customized for the current CAM-Part with the Automatic CAM-Part definition settings page of the Part Settings dialog box (see topic 2.10.5).
818
12. Settings
When this option is chosen, the Host CAD simulation mode is used as default for each new simulation session.
Remember last simulation option
When this option is chosen, the simulation starts in the last used mode. Gouge check The Turn on Gouge check by default check box enables you to perform automatic gouge checking during the tool path simulation.
819
12.14.3 Background
Background color This option enables you to choose the color for the Machine simulation background. The Color dialog box enables you to choose the appropriate color.
Background gradient This option enables you to choose the colors for the Machine simulation gradient background. The Color dialog box enables you to choose the appropriate colors.
820
12. Settings
Vertical
Diagonal descending
821
Diagonal ascending
822
12. Settings
12.14.6 Environment
This check box enables you to edit the CNC-machine definition in the Machine simulation environment.
823
Cover page This option enables you to define the path to the cover page used for the CAM-Part Documentation (see topic 2.13).
824
12. Settings
During the launch, the external program will receive from SolidCAM the following parameters: Full path to the loaded CAM-Part. Name of the loaded CAM-Part. For example, the batch file that was defined as External program contains the following string: C:\EditNC\EditNC.exe %1\%2.TAP The CAM-Part C:\SolidCAM2009\User\cavity.prt is loaded. When you launch the external program, SolidCAM will transfer the name and path of the CAM-Part to the batch file. Parameters of the batch file will receive their values and the following command will be executed: C:\EditNC\ EditNC.exe C:\SolidCAM2009\User\cavity.TAP.
825
Prismatic part_20-6_nish_wall
Operation group name Default set name Operation name
12. Settings
827
Create planar surface at Part Lower Level (Zero level) This option defines the default state of the Create planar surface at Part Lower level option in the CoordSys Data dialog box (see topic 2.2.7).
828
12. Settings
829
The Create button enables you to create the folder that will be used for GCode directory in the specified location. The Browse button displays the browser dialog box that enables you to choose another location that will be used for the GCode directory. If the new folder cannot be created, the following message is displayed:
If the chosen folder has the read-only attribute, the following message is displayed after the confirmation of the Browse dialog box or the SolidCAM Settings dialog box:
By default, the GCode directory location is not defined. You have to specify it when you choose the In the GCode directory option for the first time. Create subfolders for split GCode files When split marks are detected in SolidCAM Manager during the GCode generation for the entire CAM-Part, SolidCAM creates a number of GCode segment files. Each such GCode segment file is created for one or several operations enclosed by split marks. These files are named with the CAM-Part name followed by the - sign and the order number of split segment. Split marks are ignored in case of GCode generation for several operations. With the In the GCode directory option, SolidCAM creates separate CAM-Part GCode folders in the specified folder location. When the Create subfolders for split GCode files check box is selected, SolidCAM creates a separate folder for each GCode segment file and saves the GCode segments files there. The folder is created in the GCode folder of the CAM-Part in the specified GCode folder location. The name of the folder is the same as the GCode segment file name.
830
12. Settings
When the Create subfolders for split GCode files check box is not selected, SolidCAM generates all the GCode segment files directly into the GCode folder of the CAM-Part in the specified GCode folder location. By default, the Create subfolders for split GCode files option is not selected. Create separate folders for each CAM-Part When this check box is selected, SolidCAM creates a folder for each CAM-Part and saves the GCode file there. Otherwise, the GCode files for all CAM-Parts are generated into the GCode directory. Additional control of GCode When this check box is selected, you can alter the GCode file name and location. When you click one of the GCode generation commands, the Windows-style Save GCode browser is displayed with the default CAM-Part name and location that might be edited.
All the GCode files previously generated for the current CAM-Part remain in the specified folder. When this check box is not selected, the GCode is generated and automatically saved in the defined location.
831
GCode generation for the entire CAM-Part The Erase all previous GCode files check box enables you to choose whether the old GCode files generated for this CAM-Part remain or are removed when a new one is generated. This check box is not available if the Create a separate folder for Each CAM-Part check box is not selected and when the Customize GCode file name check box is selected. GCode generation for the entire for separate operations The Erase all previous GCode files check box enables you to choose whether the old GCode files generated for separate operations remain or are removed when a new one is generated. This check box is not available if the Create a separate folder for Each CAM-Part check box is not selected and when the Customize GCode file name check box is selected.
832
12. Settings
833
When a new item is defined between two existing items, SolidCAM performs renumbering in order to assign to each item an updated sequential number.
834
12. Settings
835
836
GCode
11
This command enables you to generate and display the GCode file for the CAM-Part or for machining operations. The GCode file can then be transferred to your CNC-machine using a floppy disk, via the DNC (RS 232) or Ethernet connection. The format of the NC-program depends on the Controller you selected in the Milling Part Data dialog box. The GCode output format can be customized using the GPP interface or by changing the controllers *.mac and *.gpp files.
This command enables you to generate and display the GCode file for the CAM-Part or for machining operations. The GCode file can then be transferred to your CNC-machine using a floppy disk, via the DNC (RS 232) or Ethernet connection. The format of the GCode depends on the Controller you selected in the Milling Part Data dialog box. The GCode output format can be customized either by using the GPP interface or by changing the controllers *.mac and *.gpp files. Contact technical support for more information on postprocessor customization. The GCode files location is determined on the GCode Generation page of the Part Settings dialog box (see topic 2.10.8).
838
11. GCode
11.1 Generate
This option generates all the GCode files for the CAM-Part. Then the file is displayed using the text editor defined in the Editors page of the SolidCAM Settings dialog box. If any changes were made in the operation or in the *.mac or the *.gpp postprocessor files, you have to generate the GCode again.
GCode All
This command is available when you right-click on the Operations header. You will receive one GCode file including the necessary tool changes, unless you have separated operations or operation groups using split marks. The GCode file will be saved to the CAM-Parts directory and will carry the name: <part_name>.tap.
Generating GCode for a single operation or for a group of operations
1. Click on the operation you want to generate the GCode for or select a group of operations using the mouse in combination with the Shift or Ctrl key. Then right-click and choose Generate from the GCode menu.
2. The GCode File Name dialog box prompts you to enter a name for the *.tap file.
839
11.2 List
This option enables you to display a list of the already generated GCode files for the current CAMPart or operation. The GCode (*.tap) file will be opened with the text editor defined in Editors Settings. Use the editor to change, save or print the GCode file.
11.3 Copy
This option enables you to copy GCode files. When you choose this option, the list of the generated GCode files for the current CAM-Part is displayed in the Copy GCode dialog box.
1. Choose the *.tap file you want to copy to another directory (for multiple selections, use the Ctrl or the Shift key). 2. Transfer the list of files you want to copy to the middle field by clicking the arrow. 3. Choose the drive and the directory you want to copy to. 4. Click on the Copy button in order to execute the command.
11.4 Print
This option enables you to print the GCode file.
840
Appendix
Appendix
SolidCAM Security Hardware Key To prevent the unauthorized access to the software, SolidCAM is using the hardware protection key, the plug-in device that enables the software authentication. SolidCAM hardware keys are available both for USB and LPT ports to support both standalone and network usage. To view the information about the hardware key you are using, click SolidCAM and choose Hardware Key Info from the menu. The Hardware Key Info dialog box is displayed.
Key type
This section displays the type of the key you are using: either standalone or network. Standalone hardware key enables you to run SolidCAM only on one computer where the key is installed. Network hardware key enables you to run SolidCAM simultaneously on several computers connected to a local area network. There are two types of network hardware keys: non-configurable and configurable. A Non-configurable hardware key enables you to use the same set of available SolidCAM modules for all SolidCAM network users. A Configurable hardware key enables you to choose a specific set of modules for each SolidCAM network user.
Expiration date
This section lists the additional modules, with which the current key enables you to work, such as the DNC software.
Modules
The list of CAM modules you can work with using this key.
841
Host support
This section displays the number of computers in the network that share the same hardware key. In case of Standalone type, the Seats number is always 1.
Version
When this check box is selected, most machining modules of SolidCAM supported by this key are available for working.
Save info
This button enables you to save the information about the key as an *.htm file. Configurable Network hardware keys A Configurable hardware key enables you to choose a specific set of modules for each SolidCAM network user. When you start SolidCAM, choose the seat configuration to which you want to connect. Click on the corresponding row in the table under Seat configuration selection. The row will become green if you connected to the network successfully or red if the connection failed; in the latter case the error message will be displayed. Seat configuration selection
Available
This column shows the maximal number of users that are licensed to work with the modules indicated in the same row simultaneously.
Free
Appendix
Modules
The list of CAM modules you can work with using this key.
Configuration # (optional)
In case you want to know which seat configuration is used on which host, this number enables you to identify the users that are currently using SolidCAM in the network with the help of the Aladdin Monitor utility. You can turn on this option in SolidCAM Settings if needed.
Automatically load this seat configuration
Select this check box if you wish to start SolidCAM always with the chosen configuration without displaying the Hardware Key Info dialog box. In case of connection failure the error message will be displayed. CAM Modules list
M25 RM25 SP25 AFRM DrillPocketRecog M3 HSM MI4 MI5 MS4 MS5X-3 MS5X-4 MS5X-5 MSim T T/MT-YC T/MT-YBC BS W2 W4 DNC
2.5D Milling Profile/Pocket 2.5D Rest Material and chamfering Special Additional 2.5D Mill Options Automatic Feature Recognition and Machining module Pocket and Drill Recognition 3D Milling High Speed Machining 4-Axis Indexial Milling 5-Axis Indexial Milling Simultaneous 4-Axis Milling (C-axis) HSS Sim. 5-Axis module - 4-Axis Sim. 5-Axis module - 5-Axis Machine Simulation Turning Turn-Mill - XYZC-axes Turn-Mill - XYZCB-axes Back Spindle WireEDM 2-axes WireEDM 2/4 axes WinDNC application for NC data transfer
843
SolidCAM Security Hardware Key Update In some cases SolidCAM requires the update of security hardware keys. To update the security hardware key, do the following: 1. Make sure that the SolidCAM security hardware key is connected to the computer. 2. Extract the ZIP-archive <security hardware key number>.zip supplied by SolidCAM into the ..\SolidCAMXXXX\Util folder 3. Extract the ZIP-archive customer.zip to the same folder. 4. Run the Mak_plag.bat file located in the ..\SolidCAMXXXX\Util folder. It is recommended to run it with the Command Prompt (Start > Programs > Accessories) window. When the Command prompt dialog box is displayed enter the following commands:
Cd <full path for SolidCAM folder>\Util Mak_plag
844
Index
Index Symbols
2.5D Milling 301 2D Boundary 58 2D simulation 685 3D Box dialog box 59 3D Drilling Operation 555 3D Engraving Operation 551 3D Milling 483 3D Milling Operation 484 3D Model 58 3D Model Geometry 197 3D simulation 692 4th Axis 296 5 Axis 73, 74 @tool_path_info command 833
A
Add Center Drill 678 Adding a new Parameter 579 Adding an Operation 230 Add Multi-Chain 213 Adjacent passes connection 329, 367 Adjacent tool paths connection 345 Advanced sort 265 Advanced sorting 414 Advanced Technology 264 AFRM 596 Algorithm 650 Angle 159, 530 Angle along path 516 Angle between paths 516 Angle ramping parameters 384 Angular dimensions 151 Approach from outside 370, 405 Approach open pocket from outside 507 Approximation 803 Approximation of arcs 274 Arbor diameter 159 Arc approximation 345, 366, 523, 535 Arc by points 208 Around 4th Axis Drill Geometry 194 Around Profile 377, 508 845
Ask user to find original model if not located 807 Assigning Hole Features to Feature Sets 642 Associativity of Stock and Target models 61 Automatically remove noise from input data 73 Automatic CAM-Part definition 76, 817 Automatic CoordSys Positions definition 643 Automatic optional angle 362 Automatic Sort 288 Automatic Stock model definition 76, 817 Automatic Target model definition 77, 818 Auto next 308 Auto-Save settings 816 Auto Select 209 Auto-to 209 Axis Tolerance 677 Axis type 66, 643
B
Background color 820 Background gradient 820 Ball nose mill 118 Base Geometry 336 Base points of rotation axes 751, 760 Bitangential angle 546 Blind 438 Blind Simple Hol Feature 597 Boolean Operations 226 Bore 137 Boring 435 Box (Auto) 58 Bull nose mill 119
C
CAD selection 193 Calculate operations inside Holes Recognition 678 Calculator 247 CAM-Part Definition 94 CAM-Part Documentation 97 CAM-Part Lower level 52 CAM-Part name 39 CAM-Part Properties 94 CAM-Part structure 40 CAM-Part Upper level 52 Capture Image 99 Ceiling offset 466 846
Index Center drill 132, 410 Center of circle 331 Chain Geometries 203 Chains direction 205 Chains direction dialog box 217 Chains selection 215 Chains sorting 218 Chamfer 312, 314, 355, 376, 379, 406 Chamfer drill 135 Chamfer Hole Feature segment 605 Chamfer Length 160 Chamfer Machinable Hole Feature segment 619 Change tool 280, 287 Change tool data 280, 287 Changing Angle 636, 638, 639 Changing Diameter 636, 637, 638, 639 Changing Height 636, 637, 638, 639 Changing Upper Plane 636, 637, 638, 639 Check faces 490 Check gouges during calculation 273 Check synchronization always 806 Check synchronization on user demand 807 Choose STL dialog box 59 Choosing a Technological Solution 649 Choosing the tool 589, 650 Choosing the tool for the Center - Chamfer Drill Operation 654 Choosing the tool for the Center Drill Operation 652 Choosing the tool for the Chamfer Drill Operation 653 Choosing the tool for the Drill Operation 651 Choosing the tool for the Mill Operation 651 Choosing the tool for the Reaming Operation 656 Choosing the tool for the Thread Operation 655 Circular Pocket 531 Circular sorting methods 425 Clean condition 368 Clean contours of flat areas 536 Clean flat 500 Clearance level 52, 258 Clear offset 317, 468 Climb milling 537 Closed chains direction 217 CNC-controller 66, 802 CNC-machine kinematic type 743 Collapse tree 286 Color settings 812 Compare target and machined stock 699, 718 Compatible Hole Features 646 847
Compatible/Incompatible Hole features 645 Compensation 309, 375, 407, 450, 466, 511, 536 Complete Z-level 372, 406, 457, 511 Compound Hole Features 597 Compound Holes processing 606 Compressed CAM-Part 87 Compressed CAM-Part file format 87 Compressed CAM-Part settings 808 Compression factor 809 Condition 650, 667 Cone Hole Feature segment 604 Configurations page 664 Conical fillet 268 Connection type 527, 531, 532, 536 Connect islands 364 Constant depth type 310, 454 Constant step down 534 Constant Step over strategy 540 Constant Z Finish Strategy 533 Constant-Z flat floor machining 538 Constant-Z Tolerance 804 Constant-Z wall machining 534 Constraint 481 Contour 3D Operation 351 Contour style 539 Contour technology 343 Contour type 364 Conventional 537 Conversion to Chamfer Machinable Hole Feature segment 630 Conversion to Drill Machinable Hole Feature segment 628 Conversion to Flat Chamfer Machinable Hole Feature segment 630 Conversion to Flat Cylinder Machinable Hole Feature segment 629 Conversion to Thread Machinable Hole Feature segment 631 Converting CAM-Parts 88 Coordinate System 41 CoordSys data 52 CoordSys dialog box 42 CoordSys Manager 55 CoordSys settings 828 Copy 279 Copy as Working area 221 Corner 342, 363, 365 Corner Radius 158 Create planar surface at Part Lower level 54, 828 Create separate folders for each CAM-Part 831 Create subfolders for split GCode files 830 Creating Feature Sets 642 848
Index Current Configuration 665 Current Stock model method 74 Current Tool Library 142 Curve 205 Curve + Close corners 206 Cut 279 Cut from 470 Cutter tip 445 Cutting angle 679 Cutting area 525 Cutting depth overlap 469 Cutting direction 342, 363, 460, 526, 530, 532, 537 Cutting length 160 Cylindrical/Conical face 43 Cylindrical fillet 269 Cylindrical Hole Feature segment 604
D
Default CNC-controller settings 802 Default GCode numbers 68 Default Geometry Names 814 Default sets 562 Default Sets page 576, 591 Default Tool Data page 161 Define Direction 522 Define Operation Template 572 Define start by angle 535 Defining a new Technological Solution 673 Defining Process Templates 240 Definition of Coordinate Systems 77, 598, 818 Delta 47 Delta depth 258, 444, 456 Depth 375 Depth associativity 259 Depth cutting type 321, 346, 455, 467 Depth Edit dialog box 442 Depth type 310, 445 Descend to cutting level with Rapid 371, 406 Descent Angle 458, 475 Description 578 Diameter 158, 443 Diameter Offset Number 163, 256 Diameter value 445 Direction mode 546 Direction type 530, 531 Directory 39 849
Directory for Machine simulation definition 820 Disconnected Holes processing 607 Distance 594 DNC settings 823 Documentation Editor 97 Dove tail mill 120 Drill 131 Drill cycle type 368, 434, 446, 558 Drill depth 411, 444 Drill Geometry 189 Drill Geometry Selection dialog box 190 Drilling 434 Drilling Operation 409 Drill Machinable Hole Feature segment 619 Drill points 505 Drill Recognition Operation 437 Drive faces 490
E
Each step down 375 Editors Settings 824 Edit page 149 Enable collision control 822 End mill 117 Engagement angle 270 Engraving data for Translated Surface operation 474 Engraving Limit for Translated Surface Operation 479 Engraving technology 552 Engraving tool 125 Environment 823 Equal step down 320, 359 Equal step over 339, 372, 499 Exit material 363, 364 Expand tree 286 Export all tools 155 Export selected tools 155 Expression 577, 578, 581, 668, 669 Extend to edge 545 Extension 306, 342, 345, 369, 405 Extension/Overlap 319, 469 External corner type 268 External program settings 825 External wall angle 267
F
850
Index Face 399 Face mill 121 Face Milling Operation 335 Facet rendering 711 Facet tolerance 57 F_Boring 436 F_Drill 434 Feature Sets 596, 642 Feature Sets page 601, 645 Feed 162, 255 Feed and Speed defaults 184 Fillet 365 Fillet corner 344, 363 Fillet size for last cut 315, 373, 406, 407, 456, 467, 501 Final cuts 265, 406 Find Holes 439 Finish 319, 374, 407, 469, 514 Finish strategies 520 Fixture 298 Flat approach/Flat retreat 452 Flat Chamfer Machinable Hole Feature segment 619 Flat Cylinder Machinable Hole Feature segment 619 Flip 47 Floor offset 317, 373, 407, 467 Force open pockets as closed 506 Found holes Undo/Redo 439 Full diameter 445 Functions 576
G
Gap control 212 Gap maximum tolerance 804 Gap minimum tolerance 804 GCode 277, 837 GCode button 247 GCode generation 80, 829 GCode output in machine/part coordinates 750 Generating Operations 661 Geometry 187 Geometry Modify dialog box 401 Geometry page 250, 358, 397 Getting Help 36 G (Global) 578 Global TDB 663 Gouge check 273 Gouge check settings 86 851
H
Hatch 339 Hatch angle 340, 362 Hatch+Finish type 367 Hatch Roughing 513 Hatch style 539 Hatch type 361 Head-Head machine type 743 Head-Table machine type 745 H Length 161 Holder page 165 Hole diameter 438 Hole Feature Groups 607 Hole Feature Model 603 Hole Feature Parameters dialog box 608 Hole Features 596 Hole Feature segments 603 Hole Feature shapes 607 Hole Features page 601, 608 Hole height 439 Holes Recognition Functions 669, 674 Holes Recognition Manager 599, 600 Holes Recognition parameters 668, 671 Holes Recognition Settings 676 Holes Recognition Toolbar 601 Holes Tree 439, 440, 442 Holes type 438 Hole Upper level 439 Host CAD simulation 691 HR Drill Geometry Selection dialog box 438 HR Manager Toolbar 600
I
ID Number 158 Import Tool 154 Include tool data 235, 240 Incompatible Hole Features 646 Indent according to Tools/CoordSys 288 Info 245, 281 Init 293 Inserting The Machining Process 587 Installing SolidCAM 24 Internal Post-processor 833 852
Index Interoperational tool movements 71 Interoperational Tool movements 261 Invert Check Status 337 Island offset 373, 407 Island wall angle 267 Item search in SolidCAM Manager 33
K
Keep cutting direction 341, 362 Keep tool down 333, 349, 395
L
Lead in 330, 391, 408, 482 Lead in/out arc 452 Lead out 330, 393, 408, 482 Length 160 Length Offset number 163, 256 Levels page 257, 303, 359, 403, 411 License Manager 29 Light control 690 Limit data for translated surface 476 Limit Geometry 202 Limits 475 Linear finish strategy 520 Linear pattern 414 Linear sorting methods 415 Link page 381, 408, 482 Loading Templates 237 Local TDB 663 Lollipop mill 127 Lollipop mill with conical shoulder 128 Lollipop mill without conical shoulder 127 Loop 344, 365 Loops filter 216 Lower level (Depth) 258 LPT port 29
M
Mac CoordSys number 42 Machinable Hole Feature conversion 625 Machinable Hole Features 596, 619 Machinable Hole Features page 601, 633 Machine CoordSys number 52 Machine simulation 759 853
Machine simulation settings 820 Machining Process 650 Machining Process Define Manager 572 Machining Process Group Types 569 Machining Process Insert Manager 590 Machining Process List 566 Machining Process settings 826 Machining Process Table 562 Machining Process Table Manager 566 Mac Options 65 Major thread diameter 450 Managing CAM-Parts 90 Managing Geometries 220 Managing Hole Features 609 Managing Machinable Hole Feature Segments 633 Managing Machining Processes 571 Managing Machining Process Tables 567 Managing Operation Templates 573 Managing Technology 658 Managing Technology Solutions 659 Managing tools 152 Mark open edges 204 Mark Open Edges dialog box 213 Max Distance between Holes 677 Maximum angle 489 Maximum step down 534 Maximum step over 523, 538 Measurement 701 Milling CAM-Part 38 Milling Part Data dialog box 40 Milling STL CAM-Part 108 Milling type 537 Min. corner radius 365 Minimal clean condition 368 Minimum angle 489 Minimum cut area 539 Minimum step down 534 Minimum step over 524 Min. Overlap 339 Mirror 296 Miscellaneous parameters 272 Model name 39 Model Reference 93 Modify 466 Modify Geometry 305 Modifying Chamfer Machinable Hole Feature segment 638 Modifying Drill Machinable Hole Feature segment 635 854
Index Modifying Flat Chamfer Machinable Hole Feature segment 639 Modifying Flat Cylinder Machinable Hole Feature segment 637 Modifying Machinable Hole Feature segments 634 Modify offset 306 MP Picture 566 Multi-Passes 451
N
Nethasp.ini 30 NethaspTCPIP.ini 30 New Milling Part dialog box 39 Normal 523 Normal to current view 46 Number of finishes 319, 469 Number of flutes 161
O
Offset 468 Offset cutting 524 Offset for check faces 491 Offset from model 557 Offset on surface 473 Offsets 316, 346, 354, 373, 407, 466, 514 One pass technology 346 One way 521, 526, 531 Open chains direction 218 Open contour strategy 511, 537 OpenGL rendering 706 Open pockets machining 369, 405, 505 Operating Feature Sets 646 Operation buttons 245 Operation default templates 84 Operation dialog box interface 231 Operation name 233 Operation Points 592 Operations 229 Operation Sequence 284 Operations page 601 Operation Start level 71, 262 Operation templates 560 Operation Templates page 572 Operation Tool Data 254 Operation Transformations 290 Outside Holder Length 160 Overlap 339, 372, 406, 473, 475, 498 855
P
Parameter 578 Parameters 561, 577 Parameters definition 592 Parameters of Machinable Hole Feature segments 619 Parameters Table 592 Parametric field menu 575 Parametric tool definition 584 Part Clearance level 71, 261 Part Parameters 579 Part settings 70, 679 Paste 279 Peck 435 Pencil milling 545 Permanent Tool 152 Pick center of tool path spiral 530 Pick origin 46 Pick X-direction 46 Pick XY origin 46 Pick Y-direction 47 Pitch 160 Pixel rendering 712 Planar face 43 Planar Hole Feature segment 605 Plunging 514 Plunging pattern 271, 368, 513 Pocket 542 Pocket-auto boundaries 544 Pocket Operation 357 Pocket Recognition Operation 397 Point to point 207 Polar Sort 219 Position 42, 52 Preparation to Holes Recognition 598 Process Template 240 Process type 472 Profile offset 455 Profile Operation 302 Profile/Pocket Geometry 199 Profile with limit 543 Profile with offset 541 Program Number 68
R
Radius 530 856
Index Ramping 326, 381, 408 Ramping position 385 RapidVerify control panel 715 RapidVerify simulation mode 715 R_Boring 435 Reamer 136 Reaming 619 Reaming Diameter 607 Reaming Height 607 Reaming recognition 607 Rename operations 279 Renumber Tools 153 Rest material 312, 376, 406, 507 Rest Material calculation tab 74 Rest Material simulation 714 Restore Data from Model 443 Restore Data from Model to All 443 Result value 578 Reverse drilling sequence 558 Reverse tool path 348 R/O 578 Rotate 294 Rotation 53 Rotational axes direction 746 Rotational axes names 749 Rotation around axis 47 Rotation axis limits 754 Rough 318, 458, 468 Roughing 498 Rough tools 150 Ruled Surface 543
S
Safety distance 258 Same as Lead in 332 Save button 245 Save & Calculate button 245 Save & Copy button 247 Saving Templates 235 Saving the updated stock in the STL format 96 Scallop 458, 473, 474, 523, 534, 538 Second offset number 256, 464 Section depth type 458 Section Geometry 201 Section geometry name 472 Segments Union 617 857
Select Faces dialog box 398, 491 Selecting single entities 205 Selection filter 193 Selection Filter 215 Selection mode 700 Self intersections 709 Semi-finish and Finish cycles 458 Separate areas 377, 508 Sequence of drill positions 413, 446, 557 Sequence of thread positions 449 Set CCW 204 Set CW 204 Setting SolidCAM licenses on client computers 30 Shaped tool geometry definition 180 Shaped Tools 138, 177 Shaped Tools dialog box 177 Shaped Tool segments 180 Shape page 167 Sharp Corner 344, 366 Shift 53 Show Data 682 Show/Hide CoordSys in tree 287 Show/Hide Tools in tree 286 Show sorted 558 Show tool 148, 683 Side Step 550 Simple Hole Features 597 Simulate button 246 Simulation 681 Simulation control panel 682 Simulation Controls 684 Simulation Data 682 Simulation menu 703 Simulation toolbar 696 Slot extension 455 Slot Geometry 200 Slot levels 456 Slot Mill 122 Slot Operation 453 Smart 524 Smooth 527, 531, 532 Solid Body 398 SolidCAM Coordinate System 54 SolidCAM Interface 32 SolidCAM License Server 29 SolidCAM Manager settings 834 SolidCAM Network hardware key 29 858
Index SolidCAM Network License 29 SolidCAM Security Hardware Key 841 SolidCAM Settings 799 SolidCAM Single License 25 SolidCAM standard functions 248, 582 SolidCAM Template Directory 84 SolidCAM Temporary folder 808 Solid verification 822 SolidVerify for 3D simulation mode 710 SolidVerify for 3D tab 74 SolidVerify simulation 695 SolidVerify tab 72 Solutions page 666 Sort by Distance 218 Sort by Value 218 Sort cut order 348 SpaceNavigator 835 Speed/Feed Default 184 Sphere Hole Feature segment 606 Spin 162, 255 Spindle direction 746 Spiral finish strategy 527 Spline Approximation 202, 212 Split 284 Split Solids 698 Spot drill 134 Stairs 527, 531, 532 Start Angle 451 Start from 365 Start Holes Recognition 599 Starting SolidCAM 31 Start position 308 Stay on surface within gap of 518 Step down 318, 319, 359, 499 Step over 317, 468, 522, 533 Stereolithography file (*.stl) 703 STL file 59 Stock model 57, 58 Stock Splitting 706 Stop on Next 683 Subroutine Number 69 Supported CAD systems 24 Suppress 281, 574 Suppressing linked operations 283 Surface Curvature 550 Surface data for translated surfaces 473 Surface offset 474, 500, 514 859
Synchronization 75, 441 Synchronization check 222, 225 Synchronization of CAM geometry with design model 806 Synchronization of design model with original model 807 Synchronization of the Wireframe 221 Synchronization settings 806 Synchronization tolerance 807 Synchronization when design model configuration changed 807 Synchronizaton of the 3D Model 224 Synchronize 296 System Configuration 664 System requirements 24 System settings 676
T
Table-Table machine type 744 Taper mill 123 Tapping 435 Tap tool 126 Target model 57, 60 Technological Solutions 649 Technology 649 Technology Database 596, 649, 662 Technology Database Manager dialog box 664 Technology page 360, 404, 471, 601, 657 Technology Settings 678 Template 235 Template defaults 84 Thread 604, 619 Thread data 450 Thread diameter 159 Threading depth definition 448 Thread mill 129 Thread Milling operation 447 Thread taper 131 Through 438 Through Pocket Chain 399 Through Simple Hole Feature 597 Tip Diameter 159 Tolerance 549 Tolerance page 554 Tool Change XY 64 Tool Change Z 64 Tool Coolant page 166 Tool coolant settings 86 Tool Curvature 550 860
Index Tool data 156 Tool facet tolerance 72 Tool facet type 72 Tool Holder 169 Tool Holder Geometry definition 173 Tool Holders dialog box 169 Tool Holding system 169 Tool Libraries 140 Tool Material 161, 254 Tool Message page 164 Tool Number 157 Tool on working area 493 Tool options 63 Tool page 252, 409 Tool path arrangement 517 Tool path connections 526, 530, 544 Tool path coordinates 820 Tool path simulation 79 Tool path simulation settings 819 Tool path tolerance 550 Tool path trimming 496 Tool Range 147 Tool reference 352 Tools 115 Tool search 833 Tool search in Operation Templates 238 Tool Settings 810 Tools Filter 146 Tool sheet documentation 99 Tool side 304, 305, 351, 455, 465, 475 Tool start level 52 Tool Table dialog box 146 Tool Topology 157 Tool Type 116 Tool Type options 139 Tool units 150 Tool Z Level 53 Topology settings 676 Torus Hole Feature segment 605 Total depth 375 Total Length 160 Translate 295 Translated Surface Operation 471 Translation axis limits 752 Trim rounding 489 Trochoidal milling 269 T-Slot Operation 463 861
U
Undercut Chamfer 614 Undercut Cone 613 Undercut None 613 Undercut Planar 613 Undercut processing 613 Undercut Sphere 614 Undercut substitution 614 Undercut Torus 614 Units Settings 803 Unsuppress 281, 574 Unused Parameters Table 578 Updated Stock model 699, 701, 718 Updated Stock Model calculation 487 Updated Stock Model interchangeability 488 Update stock accuracy 72, 74 Update Stock calculation 72 Update stock model method 73 Update to Machine tool table 155 Upper level 258, 443 USB port 29 Use base points of rotation axes 758 Use Chamfer 412 Used in Current or Part Table 584 Used in MP 585 Used Parameters Table 577 Use H Length 755 use_part_shifting 756 Use profile strategy 370, 405 User Configuration 664 User-defined angle 362 User-defined parameters 579, 668, 671 User Directories Settings 801 User interface settings 827 use_rot_axis_base_point1 758 use_rot_axis_base_point2 758 Use shifting 756 use_tool_h_length 755 Using Shaped tools 182 Using the Machining processes 586
V
Variable (Define) 311 Variables 670 Variables & expressions 579 862
Index Variable step down 534 VerifyPlus simulation 687 Vertical Wall with fillets 512 View 149
W
Wall draft angle 266, 406 Wall finish 374, 407 Wall offset 316, 373, 407, 466, 468 Wireframe Geometry 199 Working area 484 Working Area 200 Working area definition via angle limits 488 Working area definition via Face selection 490 Working area definition via Geometry 485 Working area definition via Rest material 486 Working with Operations 275 Work Material 65
Z
Z-Entry 501, 515 Z-Entry angle 473 Zigzag 521, 526, 530 Z-value 594
863