Вы находитесь на странице: 1из 16

Project Code EL001

Project Title IGBT BASED INVERTER

Description 100 watts inverter can be made using IGBT driver circuit for fast and energy efficient switching. An inbuilt circuit for 20W tube light to glow in emergency. Required mini 6V bike battery.

Assembled Price 4500

Kit Price 0

EL002

AUTOMATIC EMERGENCY TUBE LIGHT

1800

EL003

ELECTRIC DIGITAL FAN REGULATOR

This eight digit fan regulator 2800 display the speed at FND display and is more reliable than conventional rotary regulator. It checks the temperature level of the area and blow the hot air to worm the same. 2200

EL005

AUTOMATIC TEMPERATURE CONTROLLED HOT AIR BLOWER

EL006

AUTOMATIC ELECTRICAL It automatically close an UNMANNED RAILWAY unmanned railway gate CROSSING CONTROLLER when train is coming from one side and close it automatically when it passes through it.

4500

EL007

ELECTRONIC MOTOR STARTER CUM CONTROLLER

An electronic starter to 'ON' 2600 and 'OFF' the connected motor of single phase through relay. It counts the number of 3500 persons entered in a hall and accordingly control the electrical device. Thus it is helpful for energy saving in room.

EL011

AUTOMATIC ROOM LIGHT CONTROLLER CUM ENERGY SAVER

2000

EL012

OVERHEAD WATER TANK It control water pump when 2500 LEVEL INDICATOR CUM overhead tank is filled and CONTROLLER gives alarm indication. It also checks under ground water level to protect dry run for pump. AUTO TEMPERATURE CONTROLLER FOR FAN The circuit control the speed of fan at two ranges which in turn controlled by room temperature. 2000

EL013

EL015

REGULATED SUPPLY This circuit is helpful for WITH BATTERY BACKUP electronic gadgets, which draw small current but are operated on comparatively high voltage.

1500

EL017

MEDIUM POWER MOSFET INVERTER

This fast and low power consumption semiconductors circuit equipped with new technology based on Mosfets specially desiged for inverters.

3200

EL019

TEMPERATURE CONTROLLED VENTILATORS

The motorised ventilators in 4500 room will automatically be open when it sense high temperature. It sense and detect the 4000 preset temperature of the unit and an RF link connected to it will indicate us using wireless circuit to switch of the control system if required. The circuit Stores the 5000 tripping sequence in a system with upto eight units/blocks. It will check the sequence on seven segment displays in which MCBs tripped due to short circuit.

EL020

AC POWER PLANT CONTROL USING TEMPERATURE SENSOR WITH RF LINK

EL021

TRIPPING SEQUENCE RECORDER CUM INDICATOR

EL023

OPTO - THERMO SWITCH The dual mode can be set 1500 in both Light and Temperature controls i.e. light operated, dark operated, high temperature operated, and low temperature operated modes on single setup. SWITCH MODE POWER SUPPLY This is an electronic equipment which requires power supplies producing low voltages at large currents. 3000

EL023

EL024

PWM BASED DC MOTOR It controls the speed of DC 2800 DRIVE motor by changing PWM using TRANSISTOR as power driver control. SPEED CONTROL OF INDUCTION MOTOR USING THERISTOR It controls the speed of 3500 INDUCTION motor by using PWM technique with THERISTOR as power driver control. A logic IC based circuit control the top and lower level of water tank. 2000

EL025

EL027

AUTOMATIC SUCTION TANK MOTOR CONTROLLER

EL028

SINGLE PHASE PREVENTER

The circuit will cut off 1500 automatically if the dual phase gadget will not getting two phases, thus to prevent the gadget. Four or Eight channel 5000 device controller can be remotely controlled by mains 220V phase line. The farm house electric poles or industrial machines or home automation can be controlled by this.

EL030

POWER LINE - DEVICE CONTROLLER

3500

EL031

POWER LINE ELECTRIC A dummy electric meter can 5500 METER be made to demonstrate READER/COUNTER this project showing meter counting using mains line communication. TIME OPERATED AUTOMATIC SEQUENTIAL POWER LOAD ON The circuit will switch on the 5500 different connected loads one by one as instant start will dimming the lights due to heavy starting current with an additional timer connected to it.

EL032

EL033

REMOTE CONTROLLED STEPPER MOTOR

IR based transmitter and receiver circuit to control speed of stepper motor: This is a digital circuit. it changes speed and direction of the motor.

3500

2200

EL036

SERVO MOTOR CONTROLLER CUM DRIVER SOUND CONTROLLED MOTOR DIRECTION CONTROLLER

3500

EL038

A microphone amplifier with 1200 flip flop circuit causes to change the motor direction.

EL039

DIGITALLY ADJUSTABLE A visual indication assures 2800 TIMER the uses in which time mode the circuit is operating out of 10 stages. UNDER /OVER VOLTAGE It controls the connected CONTROLLER CIRCUIT load to protect against under or over voltage change. WIRELESS RF TIME An electrical device will be OPERATED ELECTRICAL remotely operated for DEVICE: specific time using simple timer circuit. WIRELESS RF REMOTE SWITCH BOARD 2000

EL040

EL042

2000

EL043

The data transmission 4500 using RF 433 Mhz module will enable to operated four electrical device switching or single fan speed control.

EL044

WIRELESS RF DC/AC MOTOR SPEED CONTROL

The remote operation to control speed of fan or motor using single RF signal circuit with gear motor driver. Can be used as remote lamp dimmer. Single device operation to on or off the electrical device using Radio communication.

4500

EL045

WIRELESS RF RADIO CONTROLLED SWITCH

2500

EL046

WIRELESS RF INDUSTRIAL FAULT MONITORING DEVICE

It detects the faults in any 6000 industrial machine lik power failure, overload, overheat, over voltage at the distance using RF link as data communication using Encoder and decoders. The RFremote based to control speed of fan or motor or even trolley using RF DATA encoder and decoder circuit. 6500

EL047

WIRELESS RF BASED MOTOR SPEED CONTROL

EL048

IR REMOTE CONTROL SWITCH

A single device can be remotely operated by this system. A transmitter will transmit the IR frequency 38kHz and a matching receiver will receive the signal to switch a relay to control device. Four electrical device can be remotely operated by this system. A transmitter with encoder circuit will transmit the IR frequency 38kHz and a matching receiver will receive the signal to switch the relays to control devices. A Multiple or single device control circuit can be operated with this circuit.

1800

EL049

IR REMOTE CONTROL SWITCH BOARD

4500

EL050

OPTICAL FIBRE/LASER BASED APPLIANCE SWITCHING SYSTEM OPTICAL FIBRE/LASER BASED DC/AC MOTOR SPEED CONTROL

3000

EL051

A PWM technique is used 4000 to operate the dc or ac motor at a distance using IR or Laser as transmitting medium.

EL052

ELECTRONIC DELAY SWITCH

Delay switches with timed delays before they turn on or off.

2000

EL053

OVER CURRENT RELAY

This circuit operates very 3500 fast with no intentional time delay and the operating time of these relay can be as low as 0.01sec . The WOODEN box is 12000 being modified as simple compressor less refrigerator to provide 12-15 degree temperature while cooling and is also used to heat if required with the same Thermo-EMF peltier junction based system. This circuit consists of relaxation oscillator, pulse count were frequency circuit, SCR control socket circuits, voice circuits and exchange music buck rectifier circuit. 3500

EL054

THERMO-EMF REFRIGERATOR

EL055

ELECTRICAL CONTROL CIRCUIT FOR MUSICAL LIGHTS

EL056

AUTOMATIC VOLTAGE STABLIZER

Its a electronic device 3800 which has transformer and other control circuit for controlling output ac voltage. it controls automatically the output voltage to a certain voltage. This project will transmit 6000 high voltage high frequency electrical energy from source to destination without using any electrical wires etc. User lines connected to 4000 power supply lines can be disconnected there from by a connect/disconnect switch. An isolation rectifier circuit connected across the each phase wit operational relays. Output of the rectifier circuit controlled by a timer and through that timer operates the switch. The timer restores the connection in failure of any one or two phases.

EL057

CONTACT LESSWIRELESS ELECTRICITY FOR ELECTRICAL ENERGY TRANSMISSION

EL058

3 PHASE APPLIANCE PROTECTOR

EL058

BLUETOOTH BLUE TOOTH OPERATED DEVICE CONTROLLER

This remotely operated device controller will work with mobile blue tooth network.

6500

EL059

3 PHASE INDUCTION MOTOR STARTER WITH PROGRAMMABLE TIMER: WIND MILL

4500

EL060

The Actual wind mill model 2500 that produce electrical energy from wind and charge the battery to run inverter directly. It actually track the sun as 6000 per its position and move the solar cell/water heating plates accordingly so as to get maximum power from sun light. 8500

EL061

SOLAR SUN SEEKER

EL062

THERMAL POWER PLANT Steam energy is USING STEAM alternatively used to generate electrical energy. A traditional arrangement commonly used by any thermal plant but still very useful to display as teaching aid.

EL063

HYDEL POWER DAM

A Device SETUP that 8000 generate electrical energy from running water. The model comprises a pump, a water reservoir, an alternator to gen. electrical energy. The different amusement rides can be designed to generate electrical enegy while children are using actually the park. This can be designed to generate electrical energy when vehicles cross the breaker and roll the roller based speed breakers connected with an alternator. 5500

EL064

ELECTRICAL ENERGY FROM AMUSEMENT PARK RIDES (SEA-SAW, SWING, SLIDE, ROLLER ETC.) ELECTRICAL ENERGY FROM SPEED BREAKER

EL065

4000

EL066

PADDLE CONTROLLED MOBILE CHARGER CUM EMERGENCY LIGHT

It works as we do cycling 10500 for exercise. Besides charging Mobile battery, it burns the extra calories too. The hand operated generator can be on the same principle.

EL067

HYBRID CHIMNEY

The dual natural energy 8000 sources say Wind and Sun energy is used to generate electrical energy. A good alternate source of energy for areas like deserts or barren land, where sun light is available but low speed of wind flow is there. Compressor less 15000 refrigerator to provide 12-15 degree temperature while cooling and is also used to heat if required with the same Thermo-EMF peltier junction based system works on 12V battery to be charged with Solar Cells/ Panel. 4500

EL068

SOLAR POWERED REFRIGERATOR

EL069

ELECTRICAL ENERGY This AIR GENERATOR FROM COMPRESSED AIR generate electrical energy from the air stored in a storage chamber using suitable air compressor.

EL070

ELECTRICITY FROM D.J. An alternate source or 5500 DANCE FLOOR energy can be generated by the modified dance floor using pressure sensor based electricity generators. WIND BELT Another alternate energy generation to charge battery by low power wind, say simple fan etc. A moving belt vibrate when wind strike it from any side.The magnets on both ends make the generation of electrical energy . 8500

EL071

EL072

SOLAR MOBILE CHARGER SOLAR INVERTER SOLAR STREET LIGHT CONTROLLER PIEZOELECTRIC GENERATOR

Solar panels use to charge 3000 mobile phone batteries. 4000 3500

EL073 EL074

0 0

EL075

The piezo crystals placed in 8000 an assembly will produce electricity when mechanical pressure induced on it.

EL076

BUCK BOOST CONVERTER

The electrical DC to DC 4500 converter will be used in many application where low voltage DC to be converted in high voltage DC. This is the management of 2500 the rotational speed of an electric fan.The speed control is performed by the fan based on the control signal. 4500

EL077

IR STEP BASED FAN SPEED CONTROLLER

EL078

AUTO CONTROL FOR GENSET SOLID STATE RELAY This solid state relay will operate the device without using mechanical relay.

2800

EL079

1800

EL080

AUTOMATIC STAR TO DELTA CONVERTER

The armatures of a 3 phase 5500 motor are connected as star at the time of power on and then converted to delta when it reaches 3/4 of the full speed, in order to handle more power.

EL081

SOUND ENERGY TO ELECTRICAL ENERGY

This project will convert the 3000 sound energy to electrical by showing it at LED lights when a harsh sound is created in front of it. An additional oscillator that generate different medium of sound is also the part of this project to show variation in

Вам также может понравиться