Академический Документы
Профессиональный Документы
Культура Документы
Cable
Power distribution by cable trays
Blindosbarra Pogliano
Power is distributed by means of selfsupporting and modular standard lenghts. Tap-off outlets are distributed along the run.
A specific cable for each load Power is easily tapped-off by means of tap-off plugs
Installation requires a mechanical support on which cables are installed. The handling of cables is difficult , especially if the space is narrow.
PCV deteriorates
Durability of components
Hard to modify
When a load is moved or a new load inserted, it must be cabled again
Downtime
During load maintenance power must be turned off since protection is inside the switchboard
Protection devices can be inserted in the tap-off plugs, which means that no need to turn off the power during load maintenance.
Modularity
Runs can be modified, moved or removed when the need arises
Easy to layout
- Layout is easy - Technical data and parameters are clear from the beginning.
Maggiore flessibilit Busbar trunking is ed more economicit del flexible, safe and cavo less expensive
Downtime Maintenance of loads may require that the whole system be switched off
0,5 hours
per meter for the run
0,5 hours
per lighting device
No downtime
Any maintenance only involves one lighting load, which means power doesnt need to be turned off
0,2 hours
per meter to install the busbar trunking
0,2 hours
per lamp for suspension and electrical connection
BS for distribution up to 1000 A BX and BV for transformer /switchboard links up to 5000 A and beyond
Ideal for connection between transformer and switchboard or between switchboards
Suitable for electrical power distribution, to feed whether lower rated current distribution runs or machines
Easy to design
- The design is easier and faster - Design possible even without knowing the exact destination of loads. Knowing total loads and the characteristics of the installation is sufficient
Technical warranty:
- It complies to all existing standards. - Safely designed. - Reliable.
Speed of installation.
Time to deliver the job cut in half
No downtime
Protection devices contained in tap-off plugs make it possible to single out maintenance operation without turning off the general power
Safe buildings
Low magnetic fields (much lower than with cable). Low emissions even in case of fire.
No maintenance
Once installed they dont require any maintenance other than common sense (and tightening of joints in case of BX)
No systems go out of production Reliability over time is the best warranty (since 1943)
Product service
Technical questions are answered within 1 day if they can be solved by phone We can have a drawing ready within 1 week
Technical service
We monitor the electrical world
We can be of service in case of special projects. Technical service on international standards. Our company has installed electrical products for more than 80 years. We can be of service to any installer.
Technical service
The future
Installation courses