Академический Документы
Профессиональный Документы
Культура Документы
A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Skills Exam, you will: finish connecting the devices configure a Linksys device to provide access to both wired and wireless clients verify and troubleshoot full connectivity to the Internet
Addressing Table
Device WR1 WAN Interface WR1 LAN Interface DHCP Settings NetAdmin File Server PC1 PC2 172.16.1.1 172.16.1.151 172.16.1.175 172.16.1.10 172.16.1.20 DHCP Assigned DHCP Assigned DHCP Assigned DHCP Assigned DHCP Assigned DHCP Assigned 255.255.255.0 n/a IP Address Subnet Mask Gateway
b. From the command prompt on NetAdmin, ping WR1, the default gateway.
c. Activate DHCP on the LAN interface and create a pool that will deliver a maximum of 25 addresses from the 172.16.1.0/24 subnet starting at 172.16.1.151. d. Configure 192.0.0.1 as the first static DNS address.
a. Allow for remote access to WR1 with the following case-sensitive password: cisco123
b. Use the case-sensitive password 12345ABCDE to configure WR1 with WEP authentication.
c. Configure PC1 and PC2 to re-associate to the wireless network. It may be necessary to release and renew the IP configuration. d. Verify full connectivity between LAN devices and from LAN devices to the Cisco server at www.cisco.com. For example, the following pings should be successful. NetAdmin can ping PC1. PC2 can ping www.cisco.com.
Version 3.0 Created in Packet Tracer 5.3.2.0027 and Marvel 1.0.1 All contents are Copyright 1992 - 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.