Академический Документы
Профессиональный Документы
Культура Документы
WSachse; 4/2014; 2
Lecture 9 - 7-April-14
WSachse; 4/2014; 3
Measurement Systems:
Actuator System
Control Stage
Sensing Element
Transduction System
Stage 1
Stage n
Output Stage
WSachse; 4/2014; 4
Lecture 9 - 7-April-14
WSachse; 4/2014; 6
Lecture 9 - 7-April-14
WSachse; 4/2014; 7
Lecture 9 - 7-April-14
R Bhaskaran, 2014
WSachse; 4/2014; 10
Lecture 9 - 7-April-14
et: set element type keyopt: set keyoption to control element behavior
et, matid, 181: set element type to 181 (i.e. shell181) keyopt, matid, 1, 2: set keyoption #1 to 2 (strain/stress evaluation only)
Lecture 9 - 7-April-14
WSachse; 4/2014; 13
Check that:
Boundary conditions on displacement and traction are satisfied Equilibrium is satisfied: Reactions balance applied load ANSYS results are reasonably independent of the mesh ANSYS results compare well with EulerBenoulli beam theory
Original Slide from R Bhaskaran, 2014
WSachse; 4/2014; 14
Lecture 9 - 7-April-14
xx
(micro-strain)
M&AE 3272 - Lecture 8
-1239.9
-1239.4
-1239.0
-1227.9
WSachse; 4/2014; 15
Crank #3:
Crank #4:
Parasolid files of these geometries are available to you for direct input to ANSYS
M&AE 3272 - Lecture 8 WSachse; 4/2014; 16
Lecture 9 - 7-April-14
When both crank arm and pedal shaft are present, need to form new part to connect them.
WSachse; 4/2014; 18
Lecture 9 - 7-April-14
Initial Mesh
Refined Mesh
M&AE 3272 - Lecture 8 WSachse; 4/2014; 19
von Mises Yield Criterion: 12 1*2 + 22 < Y2 Define: von Mises stress
M&AE 3272 - Lecture 8
10
Lecture 9 - 7-April-14
12 1*2 + 22 < Y2
M&AE 3272 - Lecture 8 WSachse; 4/2014; 21
11
Lecture 9 - 7-April-14
DELIVERABLES:
(Annotate plots: Name; View) Iso-metric views of original mesh Refined mesh Plot of von-Mises stress (Original/Refined).
Original Slide from R Bhaskaran, 2011
M&AE 3272 - Lecture 8
WSachse; 4/2014; 23
Initial Mesh
Refined Mesh
M&AE 3272 - Lecture 8 WSachse; 4/2014; 24
12
Lecture 9 - 7-April-14
Three (3) strain gages mounted in different directions. Each gage measures longitudinal strain only (or corrections
for cross-sensitivity are made prior to data analysis.)
13
Lecture 9 - 7-April-14
cos2 +
sin2 +
x y = 2 ( y = (
M&AE 3272 - Lecture 8
y ) sin 2 + xy cos 2
WSachse; 4/2014; 27
WSachse; 4/2014; 28
14
Lecture 9 - 7-April-14
WSachse; 4/2014; 29
WSachse; 4/2014; 30
15
Lecture 9 - 7-April-14
E ( (1 2) E ( = (1 2)
+ +
2) 1)
2 + 2 1 1 2 2
< Y
WSachse; 4/2014; 31
16
Lecture 9 - 7-April-14
LabVIEW : cycle_test.vi
WSachse; 4/2014; 33
etc. . .
etc. . .
etc. . .
WSachse; 4/2014; 34
17
Lecture 9 - 7-April-14
WSachse; 4/2014; 35
18