Вы находитесь на странице: 1из 3

Items needed to build a PC

One Tower Intel Pentium Processor & Memory

Hard Drive

DVD/CD Writer

Mother Board Intel Desktop Board

Directions from Mother Board Box

Step by Step Instructions to Build a PC


1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Put the machine on its side with the vents up. Lift clips and slide to remove the cover of the tower. Open Intel motherboard. Find directions provided with the motherboard. Open all boxes. Make sure to ground yourself by holding the case every time you touch the motherboard. Put the silver protector plate in, make sure it is flush against the opening. Put the motherboard in and screw it in the six different spots to hold securely. Remove plastic cover on motherboard (that says remove) by lifting the hook. Insert silver square CPU and insert in center of the motherboard. Lower lid and snap into place. Insert memory cards and clip into place with white clips on the side. Make sure they are secure. Place the fan on top of the CPU, make sure the yellow, green and blue cord is on the left side and snap all four corners in securely. Connect plug to CPU fan plug. Connect outside fan with plugs. Connect wires, each set of wires has a label, find and match up and connect. Connected speaker to #8 from picture but picture shows #12. Connect DVD take front plate off by pushing from the inside of the box, it just pops out. Connect wires to DVD and computer, snap screws in. Hard drive goes in the front by the power button. Connect power and PP wire code to hard drive and screw in. Close case and plug power cord into socket and power up the computer.

Installing the Operating System (OS)


1. Turn on computer. 2. Insert the media disk and follow the screen prompts. Then power the computer off and turn on again to activate the disk. 3. Follow screen prompts to click next. 4. Read the license terms then check the I accept the license terms. 5. Select custom advanced for type of installation. 6. Asks where to install select disk space then Windows will go through several restarts. a. Copy Windows file b. Expanding Windows files c. Installing features d. Installing updates e. Completing installation 7. Type user name CIT Creators is the user name for our PC. Make up a user name that you can remember. 8. Type in a password CIT300 is the password for our PC. Make up a password that you can remember. 9. Type in product key from the OS box. 10. Help protect computer select use recommended settings. 11. Set the date and time. 12. Windows activation, go through the prompts on the screen but only if you are connected to the Internet. If you are not connected to the Internet, you can still finish the OS installation, select cancel. When you are connected the system will automatically prompt you to activate your OS system. The OS system is now completed. Congratulations!!

*NOTES Some possible problems that you might come across. If you get power and light but the computer beeps, then the monitor comes on briefly and it says no signal. The fan works, sound works and lights work. The problem was fixed by checking all the hardware inside the tower to make sure everything is securely fastened. In this case, it was the memory was not seeded (connected correctly). Be sure to snap memory in place.

Вам также может понравиться