Академический Документы
Профессиональный Документы
Культура Документы
25
Atlas Copcosrange of surface crawlers continues to raise the bar. The popular multipurpose ROC L8 drill rig has been rened to increase its performance and versatility with an even higher capacity and greater exibility than previous models.
You can now drill production holes, improve stripping ratio with double benching and pre-splitting, and control your dilution with reverse circulation (RC) with a single drill rig. The ROC L8 is ideal for most applications in surface mining and quarrying, such as the drilling of production blast holes, pre-split and buffer blast holes as well as lifters. Its flexibility also makes it well suited for drilling de-watering holes for pit-wall depressurisation. Its low weight and limited dimensions makes the ROC L8 easy to move from site to site, from bench to bench. The versatility of the ROC L8 gives you unique benefits.
A selection of rotary heads for optimum use of 46" down-the-hole hammers Long life aluminium box prole hydraulic cylinder feed system with exchangeable snap on stainless steel wear protections Full-view ROPS and FOPS cabin, silenced and vibration damped
Carousel tube handling system with deep hole capacity and free selection of drill tubes
The exibility of the ROC L8 feed swing permits inclinations of up to 30 degrees right and left and 40 degrees forward. Full-length, spring operated canopy doors offers full access to service points
Waste excess
Lifting aid
The feed-mounted service winch offers lifting capacity when loading drill tubes into the rod handling system for extended hole depth or for lifting components for service. The control is conveniently located at the break out table.
Accurate sampling
ROC L8 is designed to handle inpit grade control for accurate geological sampling. A selection of Reverse Circulation options is available for samples of varying size and quality. The pictured cone sampler is controlled from the cabin.
Increased safety
With a reverse camera, the rear terrain can be viewed on a cab-mounted monitor for increased safety while reverse tramming. The same monitor may also be connected to the optional DVD for viewing DVD discs.
110 mm (4 1/16") LONG FEED SHORT FEED 45 m (148') L8 30 bar L8 25 bar 328 kW (440 HP) 402 kW (547 HP)
203 mm (8")
216 mm (8 ")
54 m (177')
Engine Power:
L8 30 bar L8 25 bar 470 l/s (995 cfm) 405 l/s (858 cfm) 500 l/s (1060 cfm)
www.atlascopco.com
Illustrations in this brochure may show equipment with optional extras. Specications and equipment subject to change without prior notice. Consult your Atlas Copco sales company for specic information. Atlas Copco Rock Drills AB