Академический Документы
Профессиональный Документы
Культура Документы
1. General description
74AHC1G14 and 74AHCT1G14 are high-speed Si-gate CMOS devices. They provide an inverting buffer function with Schmitt trigger action. These devices are capable of transforming slowly changing input signals into sharply dened, jitter-free output signals. The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.
2. Features
I Symmetrical output impedance I High noise immunity I ESD protection: N HBM JESD22-A114E: exceeds 2000 V N MM JESD22-A115-A: exceeds 200 V N CDM JESD22-C101C: exceeds 1000 V I Low power dissipation I Balanced propagation delays I SOT353-1 and SOT753 package options I Specied from 40 C to +125 C
3. Applications
I Wave and pulse shapers I Astable multivibrators I Monostable multivibrators
4. Ordering information
Table 1. Ordering information Package Temperature range Name 74AHC1G14GW 74AHCT1G14GW 74AHC1G14GV 74AHCT1G14GV 40 C to +125 C SC-74A 40 C to +125 C TSSOP5 Description plastic thin shrink small outline package; 5 leads; body width 1.25 mm plastic surface-mounted package; 5 leads Version SOT353-1 SOT753 Type number
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
5. Marking
Table 2. Marking codes Marking code AF CF A14 C14 Type number 74AHC1G14GW 74AHCT1G14GW 74AHC1G14GV 74AHCT1G14GV
6. Functional diagram
2
mna024
Y
mna025
mna023
7. Pinning information
7.1 Pinning
74AHC1G14 74AHCT1G14
n.c. A 1 2 5 VCC
GND
3
001aaf087
74AHC_AHCT1G14_6
2 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
8. Functional description
Table 4. Function table H = HIGH voltage level; L = LOW voltage level Input A L H Output Y H L
9. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCC VI IIK IOK IO ICC IGND Tstg Ptot
[1] [2]
Parameter supply voltage input voltage input clamping current output clamping current output current supply current ground current storage temperature total power dissipation
Conditions
Unit V V mA mA mA mA mA C mW
VI < 0.5 V VO < 0.5 V or VO > VCC + 0.5 V 0.5 V < VO < VCC + 0.5 V
[1]
20 75 65
Tamb = 40 C to +125 C
[2]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed. For both TSSOP5 and SC-74A packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
74AHC_AHCT1G14_6
3 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V input capacitance HIGH-level VI = VT+ or VT; VCC = 4.5 V output voltage IO = 50 A IO = 8.0 mA LOW-level VI = VT+ or VT; VCC = 4.5 V output voltage IO = 50 A IO = 8.0 mA input leakage current VI = 5.5 V or GND; VCC = 0 V to 5.5 V
For type 74AHCT1G14 VOH 4.4 3.94 4.5 0 0.1 0.36 0.1 1.0 1.35 4.4 3.8 0.1 0.44 1.0 10 1.5 4.4 3.70 0.1 0.55 2.0 40 1.5 V V V V A A mA
VOL
II ICC ICC
supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V additional per input pin; VI = 3.4 V; supply current other inputs at VCC or GND; IO = 0 A; VCC = 5.5 V input capacitance
CI
1.5
10
10
10
pF
74AHC_AHCT1G14_6
4 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
VT
VH
VT
VH
74AHC_AHCT1G14_6
5 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
Conditions Min
25 C Typ Max
ns ns ns ns pF
4.1 5.9 13
7.0 8.5 -
1.0 1.0 -
8.0 10.0 -
1.0 1.0 -
9.0 11.0 -
ns ns pF
74AHC_AHCT1G14_6
6 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
13. Waveforms
A input
VO
Y output
VM
mna033
mna101
Test data is given in Table 9. Denitions for test circuit: CL = Load capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
Fig 5. The input (A) to output (Y) propagation delays Table 10. Test data Input VI 74AHC1G14 74AHCT1G14 GND to VCC GND to 3.0 V
Type number
VO
VI
VT+
VT
VH
VH VT VT+
VI
mna026
VO
mna027
Fig 8.
74AHC_AHCT1G14_6
7 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
1.5
ICC (mA)
mna401
5
ICC (mA)
mna402
1 3
2 0.5 1
0 0 1 2
VI (V)
0 3 0 1 2 3 4 V (V) 5 I
Fig 9.
8
ICC (mA)
mna403
0 0 2 4
VI (V)
74AHC_AHCT1G14_6
8 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
5
ICC (mA)
mna404
8
ICC (mA)
mna405
4 6
3 4 2 2 1
0 0 1 2 3 4 V (V) 5 I
0 0 2 4
VI (V) 6
74AHC_AHCT1G14_6
9 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
mna036
mna058
positive-going edge
50
50
negative-going edge
Fig 14. Average additional ICC for 74AHC1G14 Schmitt trigger devices; linear change of VI between 0.1VCC to 0.9VCC
Fig 15. Average additional ICC for 74AHCT1G14 Schmitt trigger devices; linear change of VI between 0.1VCC to 0.9VCC
mna035
1 T
1 0.55 RC
1 T
1 0.60 RC
74AHC_AHCT1G14_6
10 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
A X
c y HE v M A
4
A2 A1 (A3) A
1
e e1 bp
3
w M detail X
Lp L
1.5 scale
3 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.1 0 A2 1.0 0.8 A3 0.15 bp 0.30 0.15 c 0.25 0.08 D(1) 2.25 1.85 E(1) 1.35 1.15 e 0.65 e1 1.3 HE 2.25 2.0 L 0.425 Lp 0.46 0.21 v 0.3 w 0.1 y 0.1 Z(1) 0.60 0.15 7 0
Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT353-1 REFERENCES IEC JEDEC MO-203 JEITA SC-88A EUROPEAN PROJECTION ISSUE DATE 00-09-01 03-02-19
11 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
SOT753
HE
v M A
A A1 c
3
detail X
Lp
bp
w M B
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 0.100 0.013 bp 0.40 0.25 c 0.26 0.10 D 3.1 2.7 E 1.7 1.3 e 0.95 HE 3.0 2.5 Lp 0.6 0.2 Q 0.33 0.23 v 0.2 w 0.2 y 0.1
EUROPEAN PROJECTION
12 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
16. Abbreviations
Table 11. Acronym CDM CMOS DUT ESD HBM MM TTL Abbreviations Description Charged Device Model Complementary Metal-Oxide Semiconductor Device Under Test ElectroStatic Discharge Human Body Model Machine Model Transistor-Transistor Logic
Table 7: the conditions for HIGH-level output voltage and LOW-level output voltage have been changed. Product data sheet Product specication Product specication Product specication Product specication 74AHC_AHCT1G14_4 74AHC_AHCT1G14_3 74AHC_AHCT1G14_2 74AHC_AHCT1G14_1 -
74AHC_AHCT1G14_6
13 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
Denition This document contains data from the objective specication for product development. This document contains data from the preliminary specication. This document contains the product specication.
Please consult the most recently issued document before initiating or completing a design. The term short data sheet is explained in section Denitions. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
18.2 Denitions
Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales ofce. In case of any inconsistency or conict with the short data sheet, the full data sheet shall prevail.
damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customers own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specied use without further testing or modication. Limiting values Stress above one or more limiting values (as dened in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/prole/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
18.3 Disclaimers
General Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental
18.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
74AHC_AHCT1G14_6
14 of 15
NXP Semiconductors
74AHC1G14; 74AHCT1G14
Inverting Schmitt trigger
20. Contents
1 2 3 4 5 6 7 7.1 7.2 8 9 10 11 11.1 12 13 13.1 14 15 16 17 18 18.1 18.2 18.3 18.4 19 20 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional description . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Recommended operating conditions. . . . . . . . 3 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 Transfer characteristics . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Transfer characteristic waveforms. . . . . . . . . . . 7 Application information. . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 14 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 14 Denitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Contact information. . . . . . . . . . . . . . . . . . . . . 14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 18 May 2009 Document identifier: 74AHC_AHCT1G14_6