Вы находитесь на странице: 1из 6

GREEN FOR LIFE

www.PEBsteel.com

Green Materials for Steel Buildings


AluPeb (Galvalume steel sheet) - White Cream
SRI : 68 Solar Reflectance : 57

PebRoof

CHROMATE - FREE
- The only roofing system that locks & seams - Silver180TM

LOK-SEAM

Z PURLINS
by GalvaPeb Zero Spangle Galvanized Purlins

LEAD - FREE CHROMATE - FREE

INSULATION - PEBI
- PEBI fiberglass insulation is a Green product - Save energy
Insulation thicknes (mm)

Thermal Resistance R value (ASTM C 167)


R-Value (m2.K/W) at densities 10 kg/m3

MAIN FRAME Steel Plates


Recycled Content : 17%

100
Recycled Content : 30%

2.4

PebWall
AluPeb
Thermal Emittance : 0.89 Recycled Content : 17%
O/S I/S
900
41

PEBs Commitment to Green & Sustainability by using Environmental friendly materials which can meet LEED requirements.

www.greenforlife.biz

Roof Materials & Natural Light - Energy Saving


The Green roof system helps keep minimizing the heat inside the building and minimizing UV radiation from attacking its roof membrane. It also minimizes aging of the membrane from heat exposure. White Cream Roof - reflects more Heat than other roof coating.

Reflected Heat of Roof

ROOF MATERIALS
Special Roofing materials - Imported from Japan - were used to Ensure HIGH Solar Reflectivity (SRI), & Thus Reducing Heat Inside the Factories. SRI: 68 Solar Reflectance: 57 Thermal Emittance: 0.89 Recycled Content: 17% RECYCLED CONTENT Reducing waste was necessary, & Thus Sustainability of Resources & the Reuse of Limited Resources was part of the Mission to Achieve LEED. PEB steel had to work closely with Nippon Steel to ensure the use of High Recycled Content.

BIG EVENT USING NATURAL LIGHT (No power consumption)

NATURAL DAYLIGHTING
Saving the Environment Meant also reducing Waste & Saving on Energy Resources. PEB Steel used a Double Skin Translucent Sheets for the Roof , Walls & the Ridge vents. Big Saving on the Electricity Bill was a Result. Workers Too Enjoyed Better Working Conditions. Sunlight through the Skylight & Window increase the light volume inside & saving electric from lamps in factory.

INSULATION
PEBI Insulation Was Used Extensively With HIGH Reflectivity R value. White Interior Finishing used with This PEBI that Resulted in Very Pleasing Finish. With white metal sheet roof and heat Insulation fiberglass layer underneath will reduce the solar heat into the building & increase the energy efficiency.

Insulation

Comfort from hot and cold

Natural Ventilation - Energy Saving


RIGDE VENTILATION ON ROOF
Roof Ventilation is a NECESSITY to ensure Proper Circulation of Air. Most factories. In Vietnam Used Ineffective Jack Roof Monitors JRM. This is TOTALLY wrong. Hot Air can NOT go up, then Down, Then Up!!!. PEB Steel had to work closely with Taekwang representatives to Design the Most Efficient Ridge Ventilator RV. Total Air Circulation meant Roof + Wall Ventilation going together to achieve Best Working Conditions for the Workers.

RIDGE VENTILATOR LOOKING FROM DIFFERENT ANGLES


Open from the Top Bird Screen Open from the Top From the Inside
RAIN WATER

HOT AIR

Sketch showing how Roof & Wall ventilation work together to create the Air Circulation inside building.

WALL VENTILATION
Insulation & Ventilation always go together. Insulation can not be effective without PROPER Ventilation. PEB Steel made sure that Huge Areas at Walls Were Ventilated Properly. PEB Steel used huge 5M Wide Canopies to Prevent Any Rain water Entering from the Wall Areas.

5M Wide Canopy

5M Wide Canopy

Open both sidewalls of building to maximize the inflow of fresh outside air.

HOT AIR

Green Materials & Resources


Made in Japan

Silver180TM

CHROMATE - FREE
CHEMICAL TREATED LAYER

The corrosion resistance of Silver180TM is enhanced by the composite effect of adding aluminum, magnesium and silicon to the conventional zinc coating. Silicon, among other elements, is highly effective in inhibiting corrosion when combined with Mg.

85.8% ZN - 11% AL - 3% Mg - 0.2% Si 180g/m2 (both sides) BASE METAL

85.8% ZN - 11% AL - 3% Mg - 0.2% Si 180g/m2 (both sides) CHEMICAL TREATED LAYER

Green Steel Plates from Japan

Energy and Resources: Their Interrelationship Based on Recycling and Its Impact on the Environment
Green Steel Process

Source: Nippon Steel

GREEN COATING
GalvaPeb - ZeroSpangle Galvanized Purlin
Purlin & Girt: C & Z
Hot dipped zinc coating high tensile steel (350gr/m2 total Zinc Coating) Standard: ASTM A653 SS Grade 50 JIS G 3302 SGH 490 Y Z35 ZL AS 1397 G450 Z350

LIGHTLY OILED LAYER RESIN LAYER


Z35 - 350gr/m2 total Zinc Coating (both sides)

BASE METAL

Z35 - 350gr/m2 total Zinc Coating (both sides)

LEAD-FREE ZINC COATING


ZeroSpangle is better quality for the Environment- It removes antimony and lead free

RESIN LAYER LIGHTLY OILED LAYER

Perfect Z Lapping

ZERO SPANGLE

REGULAR SPANGLE

PEB Steel is a pioneer in the eld of Green


ADVANTAGES of the GREEN BUILDING
8-9%: Decrease in operating costs 7.5%: Increase in building values 6.6%: Improvement in ROI (Return on Investment) 3.5%: Occupancy ratio increase

HOW PEB STEEL BUILDINGS SUPPORT YOUR GREEN


Five of the eight categories outlined by LEED* that contribute to sustainability are applicable to PEB Steel Buildings Co.
Sustainable sites Energy and atmosphere Materials and resources Indoor environmental quality Innovation design

Points directly attainable by using PEB products are available in the following LEED* credit categories:
- Sustainable sites 6.1 - Stormwater design Quality control - Sustainable sites 7.2 - Heat Island Eect Roof - Energy and atmosphere 1- Optimize Energy performance - Materials and resources 1.1 - Building reuse Maintain existing walls, oors, and roof - Materials and resources 4 - Recycled content - Indoor environmental quality 4.2 - Low-emitting materials paints and coatings - Indoor environmental quality 8.1- Daylight and views daylight - Innovation design 1- Innovation design 1 point 1 point 1 point 1 point 1 point 1 point 1 point 1 point

(*) LEED stands for Leadership in Energy and Environmental Design and it was established by the U.S. Building Council to provide objective criteria for rating the energy efficiency and quantitative measure for evaluating building performance.

PEB Steel Buildings Co.,Ltd is a member of U.S Green Building Council


PEB reserves the right to make changes as when deemed necessary.

GREEN PROJECT PROFILE

Vietnam - Mocbai JS Company Project ( Taekwang Group -Korea) 150,000 m2


Project : Vietnam-Mocbai JS Company (Taekwang Group) Location : Tay Ninh Province, Vietnam Building type : Factory - Manufacture NIKEs products Building size : 12 buildings, 150,000 m2 PEB Steel scope of work : Design, manufacture, supply & erection steel building

Project Background
The Moc Bai Industrial Complex includes 12 buildings, Huge Office as well as other facilities. It is the Largest Green Industrial Project for Nike Shoes in Tay Ninh Province. This 150,000 sq.m factory, invested in by South Korean-invested Taekwang Vina includes building on 25 ha in the Moc Bai border economic zone. The Factories manufacture various products for Nike. This is the FIRST Green Industrial Complex, which specified that steel buildings must meet LEED requirements. PEB Steel chooses products, which are Environmentally Friendly to help lessen factors that contribute to air, water and land Pollution.

PEB STEELS CONTRIBUTION


PEB Steel provided a (design, manufacture, supply & erection) steel building that brought the project in on time and on budget, PEB Steel supplied the custom - engineered steel building system. In Completing This UNIQUE Green Project PEB Steel had to Consider the following:

- Insulation: PEBI Insulation Was Used Extensively With HIGH Reflectivity R value. Recycled content = 30% - Mainframe: Steel plates imported from Japan, recycled content: 17% - Skylight: PEB Steel used a Double Skin Translucent Sheets for the Roof.

Innovation and Design Process: Energy and Atmosphere


- Reducing energy consumption through the use of energy-efficient lighting through skylight and window, high-energy performance roof ventilation & windows, high-performance building exterior walls with improved insulation. - Ridge Ventilation: Ridge ventilation RV 6.0 were designed for this project; with 6 m width, it is a most excellent & efficient ridge ventilator. It is designed especially to utilize negative pressure so that the heat island in the factory blowed out and not to be blowed conversely by the outside wind. Opposite sidewalls of its are paved with fiberglass wall-light sheet to increase the sunlight reflection into the space inside.
Revision March 2012

Environmentally Friendly Materials:


- Roof system: Lok-seam profile; roof materials Imported from Japan with HIGHEST Solar Reflectivity (SRI = 68) and chromate free, Recycled content = 17% - Purlins: All purlins is a zero spangle galvanized with lead free. NATIONAL SALES OFFICES
HCMC HEAD OFFICE Tel : (84) (8) 3 8 475 475 Tel : (84) (4) 3 9 747 747 HA NOI OFFICE Tel : (84) (511) 6 25 28 28 DA NANG OFFICE Email: Marketing@PEBsteel.com.vn

ASIAN REGIONAL OFFICES


Tel: (662) 650 9016 BANGKOK OFFICE Tel: (951) 218 223 YANGON OFFICE PHNOM PENH OFFICE Tel: (855) (23) 678 8679 Tel: (63) 91 7529 7111 MANILA OFFICE Tel: (62) 21 5713913 JAKARTA OFFICE ISLAMABAD OFFICE Tel: (92) (51) 265 3045

Copyright 2012 by PEB Steel Buildings Co.,Ltd. All rights reserved. No part of this brochure may be reproduced without the prior written consent of PEB Steel Buildings Co., Ltd.

Вам также может понравиться