Вы находитесь на странице: 1из 1

HPL

Sr.no Particulars Specs Unit Tender Rate


1 False flooring
LAMINATED WITH ANTISTATIC LAMINATE
Supply and fixing of Unilfoor access flooring with Fire retardant Pyrogrip Lightweight Cementitious core lamianted with Anti Warp High
Pressure Laminate FS1000 grade panel with Edge support rigid grid system. ( FFH ) for Finished Floor Height: 300mm
Size of each panel 600 x 600 mm
Max permissible thickness of panels 35mm
Approved Make Unifloor
Concentrated Load 450 Kgs /Sq Inch
UDL (Uniformly distributed Load) 1650 Kgs/sq.mtr
Finish Anti Static HPL
Fire Rating Non - Combustible
a Floor panel flatness 0.76 mm in any direction
b Floor panel width or length from specified size 0.5 mm
c Floor panel squareness 0.38 mm
A Structural performance and Testing
Should comply with International CISCA standard
PANELS :
The panels are 600 x 600mm of Unifloor make and FS1000 grade. The inner empty core of the panel is injected with fire retardant
pyrogrip light weight non combustible cementitious compound at high pressure to fill in all the crevices of the panel and ensures
support of not less than 95% of the top surface area of the panel. The panel shall have Anti Warp Anti Static High Pressure Laminate as
top finish along the flanges four sides with PVC bidding allowing it to rest on the bolted stringer on the head plate of pedestals so as to
provide column and beam structure and monolithic smooth leveled floor. The panels are treated with 11 bath acid treatment and than
protected from rusting by epoxy coating with Multi Layer Corroresisit heavy duty, anti-corrosive Resin using special spraying technology
and cured in oven for best bonding.
PEDESTAL :
Sub structure installed to support the panel shall be suitable to achieve a finished floor height of 300 mm from the existing floor level.
Pedestal design shall confirm speedy assembly and removal for relocation and maintenance. The assembly shall provide easy
adjustment of leveling and accurately align panels for a maximum 25 mm in the vertical direction.
The Pedestal head assembly shall consist of a 75mm x 75 mm x3mm mechanically riveted to a 90mm long 19mm mm Dia rolled formed
stud and a check nutsof 25mm for level adjustment and arresting vertical movement. The Pedestal Base assembly shall consist of 25mm
pipe of thickness 2 mechanically locked on a press for perpendicularity and then welded to a base plate of 100 x 100 x 2mm thick with
stiffening folds.
The sub structure assembly shall be suitably anchored to the floor with suitable adhesive or fastener as recommended by the
manufacturer. All steel components shall be zinc electro plated.
STRINGER:
The stringer is zinc electro plated steel cold rolled construction specially designed with Rectangle sides for strength, lateral stability, and
rolling loads and to support the panels on all four sides for alignment. The stringer to have a counter sunk holes at both ends to
accommodate bolting of M6 machine screws to the pedestal head assembly. The stringers shall be 21 x 30 x0.8mm x 570 mm length.
Pedestal to withstand Axial Load 2500Kgs
Finished Floor Height 300mm SQM 3,850.00
Raised Floor Specifications for Unifloor Raised Floor - Anti Static HPL Finish FS1000
NOTE: Freight & Taxes Extra
Dimensional Tolerances
Page 1

Вам также может понравиться