Академический Документы
Профессиональный Документы
Культура Документы
Gennum’s 3G-SDI
Solutions
In This Issue:
Audio/Video
Gennum
Development Tools
Xilinx
Controllers
Linear Technology
Datacom
Micrel
UK Edition
November 2009
Gennum’s 3G-SDI Solutions
The most comprehensive, end-to-end portfolio of
Audio / Visual
2
For more information, including pricing, availability, datasheets and samples (if available), please visit http://uk.nuhorizons.com/FeaturedProducts
P ow er (DC-DC Converters)
3G-SDI Equalizers - GS2984 and GS2964 Key Features 3G-SDI Equalizer Benefits
SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M compliant Industry’s lowest output jitter adaptive cable equalizer and all
Supports date rates from 143Mbps to 2.97Gbps and DVB-ASI at 270Mbps guaranteed over production testing
Manual bypass for low data rates with slow rise/fall times Extended temperature range of -40 to +85 deg.C
50 ohm differential outputs support DC coupling to 3.3V and 2.5V CML
Lowest power consumption at SD/HD/3G data rates
logic
DC coupling to 2.5V on GS2984 only Longest cable reach at 3G data rates of 140m @ 0.3UI
0 to 6dB gain boost pin on GS2984 only max output jitter
Single 3.3V supply 0-6dB gain boost pin is unique to the GS2984 and helps
Temperature range -40 to +85 deg.C to compensate for 6dB flat attenuation
Both in 16 pin QFN package (4x4mm) DC coupling to Gennum 3.3V cable drivers & reclockers or
GS2984 power consumption is typically 195mW to industry standard 3.3V & 2.5V CML logic
GS2964 power consumption is typically 215mW Drop in replacements for the current GS2974A, GS2974B
GS2984 typical equalized length of Belden 1694A cable: and GS1574A derivatives
140m at 3G data rates with 0.3UI max output jitter
200m at HD data rates with 0.3UI max output jitter
400m at SD data rates
GS2964 typical equalized length of Belden 1694A cable:
100m at 3G data rates with 0.35UI max output jitter
130m at HD data rates with 0.25UI max output jitter
170m at SD data rates
Both GS2984 and GS2964 are footprint compatible with GS2974A,
GS2974B and GS1574A
3G-SDI Reclocker’s - GS2985, GS2986 and GS2965 Key Features 3G-SDI Reclocker Benefits
SMPTE 424M, 292M, 344M and 259M compliant Far lower output jitter in all SD/HD/3G data rates when compared
Supports data rates of 270Mbps, 1483.5Mbps, 1485Mbps, 2967Mbps, to other industry offerings.
2970Mbps & DVB-ASI at 270Mbps Very low power consumption
Auto and Manual Modes for data rate selection Support for a 27MHz crystal reference.
SD/HD indication O/P to control GS2978 cable driver (or the new
4-wire SPI interface for configuration and monitoring of multiple
GS2988 cable driver soon to be released)
GS29xx’s being daisy chained together.
4:1 input multiplexer on GS2985 and GS2986
Extended temperature range of -40 to +85 deg.C.
2:1 input multiplexer on GS2965
Dual reclocked data outputs or one data output and one recovered clock output Output de-emphasis to compensate for pcb trace dielectric
Loss of Signal (LOS) & Lock Detect outputs losses.
On-chip Input and Output termination Up to 40 inches of FR4 trace loss is supported on the inputs and
Mute, Bypass and Auto bypass functions 20 inches on the outputs.
Selectable 400mVpp or 800mVpp output swings
27MHz crystal with cascadable buffer to support multiple reclockers
from single crystal
4 wire SPI interface for device configuration and monitoring
Input equalization and output de-emphasis settings to compensate
for board trace dielectric losses
Supply voltages of 3.3V or 2.5V
Power consumption typically 180mW at 3G data rates and at 2.5V
for all three variations
Temperature range -40 to +85 deg.C
64 pin QFN package (9x9mm) for GS2985
40 pin QFN package (6x6mm) for GS2986
32 pin QFN package (5x5mm) for GS2965
3G-SDI Multi-Slew Rate Cable Drivers - GS2988 and GS2989 Key Features 3G-SDI Cable Driver Benefits
SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M compliant Lowest output jitter and power consumption compared to other
Capable of driving data rates up to 2.97Gbps industry offerings
GS2988 offers dual 75 ohm coaxial cable driving outputs with selectable Input trace equalization supports up to 10 inches of FR4 trace
slew rate to meet SMPTE compliance standards loss
GS2989 offers four coaxial cable driving outputs Output signal presence indicates whether an active signal is
Maximum output swing voltage of 1800mV present at the outputs of the GS298x
Input trace equalization and output signal presence A disable pin powers down the output drivers leaving them in a
No external biasing resistors required at the inputs high impedance output state - saves more power
Supply voltages of 2.5V or 3.3V Extended temperature range of -40 to +85 deg.C
Both in 16 pin QFN package (4x4mm)
Wide voltage output swing of 1.8Vpp
Temperature range -40 to +85 deg.C
Based on recommended board layout, Output Return Loss (ORL) is -20dB
at HD data rates & -12dB at 3G data rates
GS2988 is a slot in replacement for GS1578A, GS9077 and GS2978
GS2988 typical power consumption is 125mW at 2.5V supply and at 3G
data rates with all outputs enabled
GS2989 typical power consumption is 220mW at 2.5V supply and at 3G
data rates with all outputs enabled
3
LTC2656-12 - Octal 16-/12-Bit Rail-to-
Rail DACs with 10ppm/C Max Reference
C onverters
Features
Precision 10ppm/°C Max Reference
Maximum INL Error: ±4LSB at 16 Bits
Guaranteed Monotonic over Temperature
Selectable Internal or External Reference
2.7V to 5.5V Supply Range (LTC2656-L)
Integrated Reference Buffers
Ultralow Crosstalk Between DACs(<1nV•s)
Power-On-Reset to Zero-Scale/Mid-scale
Asynchronous LDAC Update Pin
Tiny 20-Lead 4mm × 5mm QFN and 20-Lead
Thermally Enhanced TSSOP Packages
Applications
Mobile Communications
Process Control and Industrial Automation
Instrumentation
Automatic Test Equipment
Automotive
4
For more information, including pricing, availability, datasheets and samples (if available), please visit http://uk.nuhorizons.com/FeaturedProducts
KSZ8873: 3-port Ethernet Switch
A new generation of low port count, cost-
sensitive and power-efficient 10/100Mbps
D atacom
switch on a chip ICs
The KSZ8873MLL, KSZ8873RLL, KSZ8873FLL, and KSZ8873MML are highly integrated
3-port switch on a chip ICs in one of the smallest footprints. They are designed to enable
a new generation of low port count, cost-sensitive and power-efficient 10/100Mbps switch
systems. Low power consumption, advanced power management and sophisticated QoS
features (e.g., IPv6 priority classification support) make these devices ideal for IPTV, IP-STB,
VoIP, automotive and industrial applications.
The KSZ8873 family is designed to support the GREEN requirement in today’s switch systems.
Advanced power management schemes include hardware and software power down, as well
as the energy detect mode that shuts downs the transceiver when a port is idle.
KSZ8873MLL, KSZ8873RLL, and KSZ8873FLL also offer the by-pass mode, which enables
system-level power savings. In this mode, the processor connected to the switch through the
MII interface can be shut down without impacting the normal switch operation.
Features Benefits
Single 2.5V or 3.3V supply with internal 1.8V LDO, and optional Enables low power design
3.3V, 2.5V or 1.8V VDDIO Ethernet traffic between Port 1 and Port 2 are sustained
Port 1 & Port 2 by-pass mode while the MII interface (Port 3) is shut down. This allows
the device connected to the MII interface to enter a
4-queue (per port) traffic prioritization, based on port, 802.1p, power saving mode
802.1Q VLAN tags, or Differential Services (both Ipv4 and Ipv6
Enables the implementation of advanced QoS policies
priority classification)
Enables the implementation of Ethernet ring network for
Source address filtering industrial control and automotive applications
Internal generated RMII 50MHz clock (KSZ8873RLL) Eliminates expensive external 50MHz oscillator for the
RMII mode
LinkMD® TDR-based cable diagnostics
Allows identification of common cabling problems,
including those not addressed by IEEE. Simplifies
network deployment and reduces network downtime
Applications
VoIP Phone
Set-top/Game Box
Automotive
Industrial Control
IPTV POF
SOHO Residential Gateway
Broadband Gateway / Firewall / VPN
Integrated DSL/Cable Modem
Wireless LAN access point + gateway
Standalone 10/100 switch
5
LinkMD is a registered trademark of Micrel, Inc.
Power & Battery Management
Wireless
Drivers
Power System Design
Fast ■ Easy ■ Flexible
EXAR’s highly configurable digital power step-down
controllers, the XRP7704 and XRP7740, more intelligently
manage today’s power systems with up to four independent
digital-control loops while integrating an on-board standby
power LDO.
Features Benefits
4-channel step-down controllers w/standby LDO Integrate the best of both worlds:
Digital control loop Low cost and flexibility of digital power management and
No external passive components control, and the robust power capabilities of analog switching
Five PID coefficients
power supplies
4A/ XRP7704 and 15A/ XRP7740 per channel
On-board gate drivers
Reduce development time to hours enabling a significant time-
Up to 1.5MHz programmable operating frequency
to-market advantage
0.9V to 5V programmable output voltage
6.5V-20V single input voltage
Independent channel (re) configurability Permit real-time power system adjustments during design, in
I²C configurability and control response to changing requirements or even after field-
Green/halogen free 40-pin QFN package deployment
6
D evelopm ent Tools
Spartan-6 FPGA SP605 Evaluation Kit
The Spartan®-6 FPGA SP605 Evaluation Kit delivers all the basic components of the Xilinx Base Targeted Design Platform in
one package. It provides a flexible environment for system design and provides customers reference design and examples
on how to leverage features such as high-speed serial transceivers, PCI Express®, DVI, and/or DDR3. It includes an industry-
standard FMC (FPGA Mezzanine Card) connector for future scaling and customization to specific applications and markets.
Ordering information
Part number— EK-S6-SP605-G
Price -- $495
7
Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit http://uk.nuhorizons.com/development/
Enhance Your Design...
With Nu Horizons Education and Development Solutions
Portal is a monthly publication containing new products, technologies and development tools
available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web.
Sign up online to receive your copy, be notified of upcoming issues or to request samples of
the products found inside.
http://uk.nuhorizons.com/FeaturedProducts
LabCam delivers online training opportunities in a way that recognizes the value of engineers’
time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry
leaders consisting of insights on products, evaluation kit overviews, end-user applications and
more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/
or peers introducing new solutions or explaining integral aspects of an important product,
solution or application. This free value-added program is packaged for short, informative and
high quality distance learning.
http://uk.nuhorizons.com/labcam/
Nu Horizons is proud to present our education and training program, which offers engineers
the opportunity to participate in technical seminars conducted by experts focused on the
latest technologies from our leading suppliers. This program provides higher velocity
learning to help minimize start-up time to quickly begin your design process utilizing the latest
development tools, software and products. Check online for the latest seminar schedule.
http://uk.nuhorizons.com/seminars/index.asp
Online Learning Nu Horizons Online Learning Center is designed to provide a complete training experience
for engineers — without having to leave the office. New supplier trainings are posted twice
Center a month and range from new product overviews to in-depth technical training and potential
design implementations. These live trainings are recorded and archived for your viewing
convenience.
www.nuhorizons.com/olc
In order to simplify the design process, Nu Horizons has created a series of application notes
Application designed to guide engineers through the process of interfacing different devices together.
Using a detailed step-by-step approach, these design guides identify key elements in the design
process. Topics in the application notes are organized by design task and each topic is a
Notes stand-alone section, with a short introduction or overview, followed by the step-by-step design
guidelines. All steps include a sufficient level of detail to provide the designer with relevant
information to proceed quickly and easily from start to finish.
www.nuhorizons.com/appnotes
Development Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring
the latest technology from the most trusted suppliers in the industry. Visit the development
Tools tool section of our website for a variety of solutions all aimed at providing a low-cost solution
for designers to accelerate a product’s time-to-market.
http://uk.nuhorizons.com/development/