0 оценок0% нашли этот документ полезным (0 голосов)
2K просмотров4 страницы
This document provides specifications for a 900MHz GSM duplexer used to create equal phase and amplitude downlink signals on each port of a cross-polarized antenna. Key specifications include a pass band of 890-915MHz for uplink and 935-960MHz for downlink, port isolation over 25dB, maximum insertion loss of 0.45dB for uplink and 3.45dB for downlink, phase and amplitude differences under 10% and 20 degrees respectively, power handling of 100W average, and IP66 outdoor enclosure measuring 232x196x53.5mm. The duplexer is suitable for base stations with a single transmitter to provide downlink diversity.
This document provides specifications for a 900MHz GSM duplexer used to create equal phase and amplitude downlink signals on each port of a cross-polarized antenna. Key specifications include a pass band of 890-915MHz for uplink and 935-960MHz for downlink, port isolation over 25dB, maximum insertion loss of 0.45dB for uplink and 3.45dB for downlink, phase and amplitude differences under 10% and 20 degrees respectively, power handling of 100W average, and IP66 outdoor enclosure measuring 232x196x53.5mm. The duplexer is suitable for base stations with a single transmitter to provide downlink diversity.
This document provides specifications for a 900MHz GSM duplexer used to create equal phase and amplitude downlink signals on each port of a cross-polarized antenna. Key specifications include a pass band of 890-915MHz for uplink and 935-960MHz for downlink, port isolation over 25dB, maximum insertion loss of 0.45dB for uplink and 3.45dB for downlink, phase and amplitude differences under 10% and 20 degrees respectively, power handling of 100W average, and IP66 outdoor enclosure measuring 232x196x53.5mm. The duplexer is suitable for base stations with a single transmitter to provide downlink diversity.
Information contained in this document is subject to confirmation at time of ordering. http://www.comba-telecom.com
Issued: Apr 12 Control: 0-0-3 1/1
Technical Specifications Electrical
Pass band MHz Uplink: 890-915 Downlink:935-960 Ports Isolation Port 1 to Port 2(TX) dB > 25 Port 3 to Port 4 (RX) Insertion Loss 890-915 MHz dB 0.45 935-960 MHz 3.45 Amplitude difference Port 1 to Port 2 (RX) <10% Port 3 to Port 4(TX) Phase difference (Port 3 to Port 4 TX) 2 max (1 Typical) VSWR Port 2 (Tx)
> 5 Port 1 (TX) <1.25 Port 3 (RX) Port 4 (RX) Power Handling(average) W 100 IM3 < 110 dBm (< 153 dBc) Impedance 50 Mechanical Dimension (L x W x H, without mounting bracket and connectors) mm 232x196x53.5 Weight (approx.) kg 3.5 Material Aluminum Connector Type 7/16 DIN-Female Operational Humidity % < 100 Operational Temperature C -50 to +65 Environmental Class Outdoor, IP66 MTBF hr > 1,000,000
System Block Diagram & Outline Drawing
la b e l
Features and Product Description
Used for creating phase and amplitude equal DL signals on each port of X pol antenna in 900MHz Suitable for BTS with only one TX to do down link diversity Low insertion loss maximizes system performance. Low Intermodulation and high power handling Compact minimizes space requirements X - P o l
A N T
4 5
BTS Filter T X + R X 1 R X 2 Port 1 Port 2 Port 3/ANT1 Port 4/ANT2 TX/2+RX2 TX/2+RX1 Jumpers with equal electrical length