0 оценок0% нашли этот документ полезным (0 голосов)
45 просмотров20 страниц
AIRCOM ENTERPRISE administration and tool user courses. Hands-on courses use real-life scenarios which are simulated within the class-room environment, resulting in a thorough understanding of the AIRCOM tools in use.
AIRCOM ENTERPRISE administration and tool user courses. Hands-on courses use real-life scenarios which are simulated within the class-room environment, resulting in a thorough understanding of the AIRCOM tools in use.
AIRCOM ENTERPRISE administration and tool user courses. Hands-on courses use real-life scenarios which are simulated within the class-room environment, resulting in a thorough understanding of the AIRCOM tools in use.
Copyright 2012 AIRCOM International - All rights reserved.
No part of this work, which is protected by copyright, may be reproduced in
any form or by any means - graphic, electronic or mechanical, including photocopying, recording, taping or storage in an information retrieval system without the written permission of the copyright owner. Course Catalogue
Competence Development and Training Services Product Courses Author: Adam Moore Version: V3 Status: Approved
Sec. Class: Commercial in confidence
External Author: Adam Moore Competence Development and Training Services Page 2 of 20 Date: Oct. 2012
Contents 1 Service Portfolio ..................................................................................................................3 1.1 AIRCOM ENTERPRISE Administration Courses .......................................................3 1.2 AIRCOM ENTERPRISE Tool User Courses ..............................................................3 1.3 AIRCOM ENTERPRISE Tool User Course Combinations .........................................3 2 AIRCOM ENTERPRISE Administration Courses ................................................................4 3 AIRCOM ENTERPRISE Tool User Courses .......................................................................9 4 AIRCOM ENTERPRISE Tool User Course Combinations............................................... 19
External Author: Adam Moore Competence Development and Training Services Page 3 of 20 Date: Oct. 2012
1 Service Portfolio Whether you use one or more of AIRCOMs engineering tools to assist with your daily functions, or work as a system administrator, the successful attendance of the relevant courses are an absolute must to get the most out of the AIRCOM ENTERPRISE suite of tools. These hands-on courses use real-life scenarios which are simulated within the class-room environment, resulting in a thorough understanding of the AIRCOM tools in use. If you a new to the AIRCOM tool suite, or have just performed a new release upgrade, the successful attendance of these courses is vital to you and your organisation. 1.1 AIRCOM ENTERPRISE Administration Courses E110 ENTERPRISE administration E151 I-VIEW LIVE PLAN Administration A400 Oracle Fundamentals E103 OPTIMA client administration E124 OPTIMA System Administrator E119 WEBWIZARD administration A402 Unix Fundamentals 1.2 AIRCOM ENTERPRISE Tool User Courses E116 ADVANTAGE tool user E101 ASSET for GSM/GPRS tool user E109 ASSET for UMTS FDD tool user E203 ASSET for WiMAX tool user E111 ASSET for LTE tool user E165 Capesso User E170 I-VIEW Dimension Tool User E152 I-VIEW LIVE PLAN Tool user E142 MYRIAD Explained E141 MERIT Tool User E106 CONNECT tool user E126 ARRAYWIZARD tool user E125 ASSET ACP tool user E104 ILSA tool user E140 SONORITY tool user A500 OPTIMA E2E Fundamentals E105 OPTIMA tool user E121 OPTIMA Advanced User E118 WEBWIZARD tool user 1.3 AIRCOM ENTERPRISE Tool User Course Combinations E108 ASSET multi-technology tool user (E101, E109) External Author: Adam Moore Competence Development and Training Services Page 4 of 20 Date: Oct. 2012
E150 OPTIMA Power User (E103, E105, E121) 2 AIRCOM ENTERPRISE Administration Courses
Title ENTERPRISE administration Code E110 Duration 2 days Designed For Administrators, who will install, manage and upgrade the AIRCOM ENTERPRISE suite for their organisation. Prerequisites Familiarity with the basic concept of relational database management would beneficial as well as some working knowledge of the ENTERPRISE tool suite. At the end of course delegates will be able to: Understand the purpose of the ENTERPRISE suite Create and configure an Oracle database Install the ENTERPRISE software Understand the process of licensing Use the ENTERPRISE administrator module Set up and configure a project Set up and manage permissions via users, groups and objects Create fields and filters Import and export project data Perform backups using simple database dumps
Title I-VIEW LIVE PLAN Administration Code E151 Duration 2 days Designed For I-VIEW Live Plan System Users, Trainers and Technical (or other interested) persons. Prerequisites Good knowledge of AIRCOM ASSET, AIRCOM Common Mediation Layer, AIRCOM EDS Good knowledge of Oracle Enterprise Nice to have: Delegates may have a good understanding of any Unix flavor (i.e Red-hat, HP-UX, AIX, Sun, Linux) and SQL, Databases, Programming language as an optional advantage. At the end of course delegates will be able to: Create and set up the Storage repository (IVLP Schema) External Author: Adam Moore Competence Development and Training Services Page 5 of 20 Date: Oct. 2012
Understand the Configuration of IVLP (dot ) .Ini Files Understand the Overview of the Mediation Server Configure and Manage the ASSET Update feature Use the Scheduler to automatically run Reports Install and configure I-VIEW Live Plan Create Reports and Report groups Use the Administrator Module Use the Navigation Panel
Title Oracle Fundamentals Code A400 Duration 2 days Designed For Any Analyst, Programmers, Developers, Testers, Trainers and Technical (or other interested) persons. Prerequisites None Delegates may have a good understanding of any SQL, Databases, Programming language as an optional advantage. At the end of course delegates will be able to: Have SQL increased confidence. Understand general database concept Understand Oracle database architecture. Be able to manipulate Oracle session to own preference Know SQL syntax & be able to construct basic SQL queries Use data dictionary table and Oracle built-in SQL functions Perform SQL query utilising any or all Oracle built in functions Be able to format, summarise and write Oracle SQL*Plus Report Understand Oracle core command groupings (i.e. DML, DDL, TCL). Understand the advantage and importance of Table Partitions & Indexes .Familiarity with Oracle Security and Know how to grant (roles and privileges) Best practices and pitfalls in SQL (i.e. null handling, manipulating dates and strings) Create Tablespaces, use constraints and create Schemas, tables, views & materialized views etc
Title OPTIMA client administration Code E103 Duration 2 days External Author: Adam Moore Competence Development and Training Services Page 6 of 20 Date: Oct. 2012
Designed For The AIRCOM OPTIMA Administration course is designed for engineers who will administer and manage the AIRCOM OPTIMA software tool after the installation. The purpose of this course is to provide AIRCOM OPTIMA Administrators with the skills required to administer AIRCOM OPTIMA's frontend. Prerequisites It is advisable that course delegates have a very good knowledge of various BSS and UTRAN parameters used for monitoring and optimising GSM and UMTS networks. A good understanding of Oracle database creation and administration procedures and should be comfortable writing and coding basic SQL SELECT statements, including the use of the WHERE clause with basic filters and simple joins. This can be obtained by attending Oracle Fundamentals course A400 class. Previously attended the AIRCOM OPTIMA Tool User course Familiarity with data retrieval / processing concepts and techniques is also expedient. At the end of course delegates will be able to: At the end of the course, delegates should have enough knowledge to administer the AIRCOM OPTIMA tool and also perform a number of application administration tasks: Delegates will also be able to complete the following objectives: Administer the AIRCOM OPTIMA sandbox, for example, defining expiry options and managing promotion requests Set a variety of general administrator options, such as the module/report auditing and email client options Manage the demands for multiple parallel database connections, and the viewing of large datasets Administer groups, users, roles and profiles using RBAC (Role-Based Access Control) Configure LDAP authentication and define 'single sign on' users Define network events - holidays and maintenance windows Utilise RBAC and LDAP with regards to Security Configure the application database Administer the data dictionary Create favourite groups Administer alarms
Title OPTIMA System Administrator Code E124 Duration 5 days Designed For External Author: Adam Moore Competence Development and Training Services Page 7 of 20 Date: Oct. 2012
The AIRCOM OPTIMA System Administration Training Course is especially designed for engineers who will administer and manage the AIRCOM OPTIMA backend. Prerequisites Delegates should ideally have taken the AIRCOM OPTIMA frontend Administrator training course, but need not have done so, particularly if they are only to be involved in the administration of the AIRCOM OPTIMA backend. It is also advisable that course delegates have a very good knowledge of various BSS and UTRAN parameters used for monitoring and optimising GSM and UMTS networks. For this course, it is also assumed that AIRCOM OPTIMA has been installed and the system administrator has configured a suitable Oracle database. Some basic Oracle SQL and SQL*Plus experience is required. e.g., you should be comfortable writing and coding basic SQL SELECT statements, including the use of the WHERE clause with basic filters and simple joins. This can be obtained by attending Oracle Fundamentals course A400 class. Familiarity with data retrieval / processing concepts and techniques is also expedient. At the end of course delegates will be able to: At the end of course delegates should have gained enough knowledge to become totally familiarized with the AIRCOM OPTIMA back-end tool set. The course will guide the delegates through the following main objectives: Understand what OPTIMA is, its architecture and benefits Understand the AIRCOM OPTIMA system architecture Review data quality and administration reports Appreciate how the backend programs work Review ETL Alarms and Alarms Forwarding Administer the AIRCOM OPTIMA sandbox Understand the AIRCOM ETL standards Administer, Define and Customise Alarms Configure the application database Administer the data dictionary Review data acquisition tools Review the Report Scheduler
Title WEBWIZARD administration Code E119 Duration 3 days Designed For Engineers (or users) in charge of any WEBWIZARD administration. Prerequisites: External Author: Adam Moore Competence Development and Training Services Page 8 of 20 Date: Oct. 2012
This course should be taken immediately after the E118 WEBWIZARD tool user course. Delegates should have a good understanding of SQL and databases, whilst Crystal Reports knowledge is optional. At the end of course delegates will be able to: Understand and Installing the WEBWIZARD database architecture Install WEBWIZARD and the software associated Perform layer creation and manage using WEBWIZARD GIS Perform region creation and manage using WEBWIZARD GIS Report publication and modification within the WEBWIZARD database Use of Crystal/Excel/PDF Reports for dynamic reports in WEBWIZARD Whats new in WEBWIZARD
Title Unix Fundamentals Code A402 Duration 2 days Designed For Any Analyst, Programmers, Developers, Testers, Trainers and Technical (or other interested) persons. Prerequisites None. Nice to have: Delegates MAY have a good understanding of any Unix flavor (i.e Red-hat, HP-UX, AIX, Sun, Linux) and SQL, Databases, Programming language as an optional advantage. At the end of course delegates will be able to: Understand Unix architecture (Directory creation, navigation, ls, cd, cp, mv, mkdir) Create users, groups, password management, security control / access, chmod, chown Increased confidence in understanding Unix commands and unpopular environment Create symbolic (soft) links, / Hard Links, Mount points (NFS) mount, Ln Have a good grasp of Unix Syntax, Pipes, Program Error codes, etc Write own shell scripts and cron (schedule) same using crontab Use aliases, profiles, environment variables, echo, export, stty Analysis (diskspace, disk usage, cpu usage etc.) find, ps, du Run processes (background, foreground, nohup, stop) Scripting (vi, grep, cut, sort, uniq, pipe, for, sed) Compression (tar, gzip, compress, unzip) Know shell types and differences Use man pages, ftp, netrc External Author: Adam Moore Competence Development and Training Services Page 9 of 20 Date: Oct. 2012
3 AIRCOM ENTERPRISE Tool User Courses
Title ADVANTAGE tool user Code E116 Duration 3 days Designed For This course is intended for competent radio optimisation engineers who want to understand how to use the ASSETs ADVANTAGE module. Prerequisites: Delegates should have a good knowledge of planning and optimizing networks, as well as familiarity with the AIRCOMs ASSET radio planning tool. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand the key features and benefits of ADVANTAGE Set actions-constraints Set up thresholds and parameters for the optimisation Create and manage plans and delta plans Run the optimiser and interpret feedback and reports Perform an analysis/evaluation of one or more plans, and rollout planning
Title ASSET for GSM/GPRS tool user Code E101 Duration 3 days Designed For Engineers who will use the AIRCOM ASSET tool in the design of GSM/GPRS networks. Prerequisites: Its suggested that delegates should have previously attended AIRCOMs courses on cell planning principles and GSM technology for engineers or equivalent. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand how to use the Geographic Information System (GIS) Create and use vectors and polygons Set up a GSM network Use fields, filters and visualisers Carry out coverage planning External Author: Adam Moore Competence Development and Training Services Page 10 of 20 Date: Oct. 2012
Set up traffic and capacity planning Perform neighbour planning Create interference tables and perform tasks for frequency planning Generate reports Carry out candidate planning Understand how to plan multi-layered (dual-band) networks Understand GPRS functionality within ASSET
Title ASSET for UMTS FDD tool user Code E109 Duration 3 days Designed For Competent radio planners who will use the AIRCOM ASSET tool in UMTS FDD network design. Prerequisites: Delegates should have attended AIRCOM's training on UMTS FDD technology for engineers and preferably cellular radio network planning, or its equivalent. They should have a good knowledge on WCDMA radio technology. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand how to use the Geographic Information System (GIS) Create and use vectors and polygons Set up a UMTS Network Use fields, filters and visualisers Perform coverage planning Model and spread traffic Perform neighbour planning Use the Simulator Generate reports Plan scrambling codes Configure HSPA in ASSET Gain awareness of the location-related planner wizards
Title ASSET for WiMAX tool user Code E203 Duration 3 days Designed For External Author: Adam Moore Competence Development and Training Services Page 11 of 20 Date: Oct. 2012
Engineers who will use the AIRCOM ASSET tool in the design of WiMAX networks. Prerequisites: Delegates should have previously attended AIRCOM's course on WiMAX technology and applied planning, or equivalent. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand how to use the Geographic Information System (GIS) Create and use vectors and polygons Set up a Mobile WiMAX Network Use fields, filters and visualisers Perform coverage planning Model and spread traffic Perform neighbour planning Use the Simulator Generate reports Plan for PN Code Indexes Perform frequency planning using an Interference Table Use the planning wizards
Title ASSET for LTE tool user Code E111 Duration 3 days Designed For This course is intended for competent radio planners who want to understand how to use the ASSET tool for LTE network planning. Prerequisites: Delegates should have previously attended AIRCOMs LTE technology for engineers or equivalent. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand how to use the Geographic Information System (GIS) Create and use vectors and polygons Set up an LTE Network Use fields, filters and visualisers Perform coverage planning Model and spread traffic External Author: Adam Moore Competence Development and Training Services Page 12 of 20 Date: Oct. 2012
Perform neighbour planning Perform frequency planning Plan the Physical Cell IDs Use the Simulator Generate reports
Title Capesso User Code E165 Duration 2 days Designed For Radio network planning and optimisation engineers who will use Capesso and Capesso Drive Test to dimension, plan and optimise radio networks. Prerequisites Basic knowledge of radio network planning and optimisation for the applicable radio standards; and Basic knowledge of ASSET and its use in radio network planning. At the end of course delegates will be able to: Use Capesso; Use Capesso Inspector, the GIS supplied with Capesso; Use Capesso Drive Test Measurement converter; and Understand and operate at the user level the Wibu Codemeter software protection system.
Title I-VIEW Dimension Tool User Code E170 Duration 3 days Designed For Engineers who will use the AIRCOM DIMENSION network visualization and capacity management and planning tool. Prerequisites Delegates must have a reasonable knowledge of mobile network architecture and capacity planning. At the end of course delegates will be able to: Set up the DIMENSION tool Define a new project Understand how to use the Graphical User Interface (GUI) Define equipment details Import project data Build network topologies from the GUI External Author: Adam Moore Competence Development and Training Services Page 13 of 20 Date: Oct. 2012
Visualise the project data in different layers Configure and load traffic Perform capacity analysis and dimensioning for the mobile layer Create paths and route traffic Evaluate the planning results and the hotspots Generate reports Create plots Perform scenario planning Work with multiple users
Title I-VIEW LIVE PLAN Tool user Code E152 Duration 1 day Designed For I-VIEW Live Plan System Users, Trainers and Technical (or other interested) persons. Prerequisites Good knowledge of AIRCOM ASSET, AIRCOM Common Mediation Layer, AIRCOM EDS Good knowledge of Oracle Enterprise At the end of course delegates will be able to: Create, Copy, Edit and Delete I-VIEW Live Plan Reports and Report Groups. Use the I-VIEW Live Plan Functionality Explorer and Workspace Understand and Use the I-VIEW Live Plan Dashboard Understand the I-VIEW Live Plan User Interface Configure and View Elements on Map View View Elements Settings and Relationship Understand the I-VIEW Live Plan Tree
Title MYRIAD Explained Code E142 Duration 1 day Designed For RF Planners and Optimisation engineers involved in the modelling of the Cell Planning Tool Asset. Prerequisites: Delegates should have a good knowledge of planning and optimising networks (separate theory courses are available), knowledge of CW Measurements, knowledge Propagation Calibration as well as familiarity with the ASSET radio planning tool. External Author: Adam Moore Competence Development and Training Services Page 14 of 20 Date: Oct. 2012
At the end of course delegates will be able to: Overview of the MYRIAD Propagation Model. Explain key features of the MYRIAD Propagation Model. Understand the Benefits of the MYRIAD Propagation Model. Configure the MYRIAD Propagation Model. Calibrate the MYRIAD Propagation Model
Title Merit ACP Tool User Code E141 Duration 3 days Designed For This course is intended for competent radio optimisation engineers who want to understand how to use Merit ACP tool in conjunction with Aircom Asset. Prerequisites: Delegates should have a good knowledge of planning and optimising networks, as well as familiarity with the AIRCOMs ASSET radio planning tool. At the end of course delegates will be able to: Have a good understanding of the Merit ACP concepts Understand the key features and benefits of Merit ACP Install and setup Merit ACP software Export Network configuration into Merit ACP Setup and configure the Optimiser Run the optimiser and interpret reports Work with the Interactive Design User Interface Analyse the network performance Understand various types of Optimisation Scenarios
Title CONNECT tool user Code E106 Duration 3 days Designed For Engineers who will use the AIRCOM CONNECT microwave and backhaul planning tool. Prerequisites: Delegates should have attended AIRCOM's microwave link planning course (or its equivalent) Delegates must have a reasonable knowledge of link planning. At the end of course delegates will be able to: Set up the CONNECT tool Define a new project External Author: Adam Moore Competence Development and Training Services Page 15 of 20 Date: Oct. 2012
Understand how to use the Geographic Information System (GIS) Define transmission equipment details and link parameters Automatic Frequency and Capacity Planning Use the height profile and visibility tools Add network elements and create filters Create and configure physical links Create and configure passive repeaters Perform LOS analysis Perform interference analysis Implement routes and capacity Creation of Primary and Secondary Routes Understand the link budget and performance indicators Generate reports
Title ARRAYWIZARD tool user Code E126 Duration 1 day Designed For RF Engineers in charge of coverage design and optimization, who will use AIRCOM ASSET in huge areas, or multiple resolution maps. Prerequisites: Understanding of ASSET for UMTS, GSM, CDMA2000, WiMAX or LTE technologies. Knowledge of path loss calculations and coverage arrays generation is essential. At the end of course delegates will be able to: Understand ARRAYWIZARD features and workflow Create coverage and statistics using ARRAYWIZARD tool Distribute and monitor processing load for predictions and analysis arrays Configure parameters sets to control the generation of arrays Programming arrays and their outputs Handle UTM border areas
Title ASSET ACP tool user Code E125 Duration 1 day Designed For Competent radio engineers who want to understand how to use the AIRCOM ASSET ACP module for network optimizations. Prerequisites: External Author: Adam Moore Competence Development and Training Services Page 16 of 20 Date: Oct. 2012
Ideally, delegates should have a good knowledge of planning and optimizing networks, as well as familiarity with the ASSET radio planning tool. At the end of course delegates will be able to: Understand the key features and benefits of ASSET ACP Set up thresholds and parameters for the optimisation Create and manage plans and delta plans Run the Optimiser and interpret feedback and reports Perform an analysis/evaluation for a plan Set Actions-Constraints
Title ILSA tool user Code E104 Duration 1 day Designed For The course is aimed at radio planning engineers with AIRCOM ASSET familiarity, who requires further knowledge on ASSETs ILSA module. Prerequisites: Delegates should have a good knowledge on GSM radio technology and frequency planning principles. At the end of course delegates will be able to: Carry out basic Frequency Planning with ILSA Improve an existing Frequency Plan Re-plan with new sites Plan a network using Frequency Groups Implement a Frequency Plan with Frequency Hopping Plan a network with Multiple Re-use Patterns
Title SONORITY tool user Code E140 Duration 1 day Designed For The course is aimed at radio planning engineers already familiar with AIRCOM ASSET but requiring more knowledge on ASSETs SONORITY module. Prerequisites: Delegates should have a good knowledge of frequency planning concepts and familiar with the ASSET radio planning tool. At the end of course delegates will be able to: Understand SONORITY features and workflow How to generate constraint External Author: Adam Moore Competence Development and Training Services Page 17 of 20 Date: Oct. 2012
Perform optimization process Benchmark and evaluate results
Title OPTIMA E2E Fundamentals Code A500 Duration 1 day Designed For Prerequisites At the end of course delegates will be able to:
Title OPTIMA tool user Code E105 Duration 2 days Designed For Engineers using the AIRCOM OPTIMA tool. Prerequisites: It is advisable that course delegates have a very good knowledge of various BSS and UTRAN parameters used for monitoring and optimising GSM and UMTS networks. Some basic Oracle SQL and SQL*Plus experience is required. e.g., you should be comfortable writing and coding basic SQL SELECT statements, including the use of the WHERE clause with basic filters and simple joins. This can be obtained by attending Oracle Fundamentals course A400 class. Familiarity with data retrieval / processing concepts and techniques is also expedient. At the end of course delegates will be able to: View Modules and Combinations with the OPTIMA Inspector Understand what OPTIMA is, its architecture and benefits Correctly configure an AIRCOM OPTIMA work area Visualise performance data using the GIS Create filters using the Filter Explorer Create Favourites and Work Areas View and create report schedules View and create data reports Create performance reports
Title OPTIMA Advanced User Code E121 Duration 2 days Designed For External Author: Adam Moore Competence Development and Training Services Page 18 of 20 Date: Oct. 2012
This course is designed for Network Optimisation Engineers who will be using AIRCOM OPTIMA - a performance monitoring facility that monitors and identifies problems in the network. Prerequisites: It is advisable that course delegates have a very good knowledge of various BSS and UTRAN parameters used for monitoring and optimising GSM and UMTS networks. Some basic Oracle SQL and SQL*Plus experience is required. e.g., you should be comfortable writing and coding basic SQL SELECT statements, including the use of the WHERE clause with basic filters and simple joins. This can be obtained by attending Oracle Fundamentals course A400 class. Familiarity with data retrieval / processing concepts and techniques is also expedient. At the end of course delegates will be able to: Understand how to use Report Builder within AIRCOM OPTIMA Create moderate to advanced AIRCOM OPTIMA modules Understand the concept of AIRCOM OPTIMA modules Check Advanced Filter and Data Explorer Options Create KPIs and global KPIs, and recreate views Use the AIRCOM OPTIMA sandbox Create AIRCOM OPTIMA reports Define and Customise Alarms Create Sandbox Objects
Title WEBWIZARD tool user Code E118 Duration 1 day Designed For Engineers and general users who will access coverage layers and performance data from any planning, or OSS tool and display within a GIS environment Prerequisites: Delegates should have a general understanding of web systems, performance network data (KPIs) and GIS. At the end of course delegates will be able to: Understand the architecture of WEBWIZARD Understand WEBWIZARD GIS How to display different layers How to display performance data (KPIs) How to create filters How to open reports WEBWIZARD New Functionalities External Author: Adam Moore Competence Development and Training Services Page 19 of 20 Date: Oct. 2012
4 AIRCOM ENTERPRISE Tool User Course Combinations
Title ASSET multi-technology tool user (GSM/UMTS) Code E108 Duration 5 days Designed For Engineers who will use the AIRCOM ASSET tool in the design of GSM/GPRS and UMTS FDD networks. Prerequisites: Delegates should have previously attended AIRCOMs courses on cell planning principles and GSM/UMTS FDD technology for engineers, or equivalent. They should have a good knowledge on GSM and WCDMA radio technology. At the end of course delegates will be able to: Have a basic understanding of the ENTERPRISE database Define new projects or use existing projects Understand how to use the Geographic Information System (GIS) Create and use vectors and polygons Set up a GSM Network Use fields, filters and visualisers Perform GSM coverage planning Set up GSM traffic and capacity planning Create interference tables and perform tasks for GSM frequency planning Understand how to plan multi-layered (dual band) networks Understand the GPRS functionality in ASSET Set up a UMTS Network Perform UMTS coverage planning Model and spread UMTS traffic Perform neighbour planning Use the Simulator Generate reports Plan scrambling codes Configure HSPA in ASSET Gain awareness of the location-related planner wizards
Title OPTIMA Power User (E103, E105, E121) Code E150 Duration 5 days External Author: Adam Moore Competence Development and Training Services Page 20 of 20 Date: Oct. 2012
Designed For Performance engineers who will use AIRCOM OPTIMA and are interested in the internal procedures for database and data retrieving. Prerequisites: It is advisable that course delegates have a very good knowledge of various BSS and UTRAN parameters used for monitoring and optimising GSM and UMTS networks. Some basic Oracle SQL and SQL*Plus experience is required. e.g., you should be comfortable writing and coding basic SQL SELECT statements, including the use of the WHERE clause with basic filters and simple joins. This can be obtained by attending Oracle Fundamentals course A400 class. Familiarity with data retrieval / processing concepts and techniques is also expedient. At the end of course delegates will be able to: Administer the AIRCOM OPTIMA sandbox, for example, defining expiry options and managing promotion requests Set a variety of general administrator options, such as the module/report auditing and email client options Manage the demands for multiple parallel database connections, and the viewing of large datasets Administer groups, users, roles and profiles using RBAC (Role-Based Access Control) Understand how to use Report Builder, View and create report schedules Understand and Create moderate to advanced AIRCOM OPTIMA modules Configure LDAP authentication and define 'single sign on' users View Modules and Combinations with the OPTIMA Inspector Define network events - holidays and maintenance windows Understand what OPTIMA is, its architecture and benefits View and create data reports and performance reports Create Favourites, favourite groups and Work Areas Check Advanced Filter and Data Explorer Options Utilise RBAC and LDAP with regards to Security Create KPIs and global KPIs, and recreate views Administer, Define and Customise Alarms Visualise performance data using the GIS Create filters using the Filter Explorer Configure the application database Administer the data dictionary