Академический Документы
Профессиональный Документы
Культура Документы
00
HP IMC Installation and
Administration Professional
Training
Lab guide
Use of this material to deliver training without prior written permission from HP is prohibited.
Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
This is an HP copyrighted work that may not be reproduced without the written permission of HP. You may not
use these materials to deliver training to any person outside of your organization without the written
permission of HP.
UNIX is a registered trademark of The Open Group.
Export Compliance Agreement
Export Requirements. You may not export or re-export products subject to this agreement in violation of any
applicable laws or regulations.
Without limiting the generality of the foregoing, products subject to this agreement may not be exported, re-
exported, otherwise transferred to or within (or to a national or resident of) countries under U.S. economic
embargo and/or sanction including the following countries:
Cuba, Iran, North Korea, Sudan and Syria.
This list is subject to change.
In addition, products subject to this agreement may not be exported, re-exported, or otherwise transferred to
persons or entities listed on the U.S. Department of Commerce Denied Persons List; U.S. Department of
Commerce Entity List (15 CFR 744, Supplement 4); U.S. Treasury Department Designated/Blocked Nationals
exclusion list; or U.S. State Department Debarred Parties List; or to parties directly or indirectly involved in the
development or production of nuclear, chemical, or biological weapons, missiles, rocket systems, or unmanned
air vehicles as specified in the U.S. Export Administration Regulations (15 CFR 744); or to parties directly or
indirectly involved in the financing, commission or support of terrorist activities.
By accepting this agreement you confirm that you are not located in (or a national or resident of) any country
under U.S. embargo or sanction; not identified on any U.S. Department of Commerce Denied Persons List, Entity
List, US State Department Debarred Parties List or Treasury Department Designated Nationals exclusion list; not
directly or indirectly involved in the development or production of nuclear, chemical, biological weapons,
missiles, rocket systems, or unmanned air vehicles as specified in the U.S. Export Administration Regulations (15
CFR 744), and not directly or indirectly involved in the financing, commission or support of terrorist activities.
Printed in US
HP IMC Installation and Administration Professional Training
Lab guide
September 2012
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 1
Contents
Lab 0 How to connect to the IMC Network ............................................................................. 3
Overview ........................................................................................................................ 3
Lab 1 Install Intelligent Management Console ......................................................................11
Overview ......................................................................................................................11
Installation Summary>Install ......................................................................................12
Section B: Install MS SQL ..........................................................................................13
Section C: Setup DMA ...............................................................................................14
Lab 2 Discover Devices ...........................................................................................................15
Overview ......................................................................................................................15
Section A: Add a device to IMC ..............................................................................16
Section B: Add a subnet range to IMC ....................................................................31
Lab 3 Resource Tab ................................................................................................................33
Overview ......................................................................................................................33
Section A: Resource Tab ............................................................................................34
Section B: Network Topology ...................................................................................36
Lab 4 Configuration Backups .................................................................................................37
Overview ......................................................................................................................37
Section A: Immediate Backup ...................................................................................38
Section B: Scheduled Backup ...................................................................................40
Section C: Compare Configurations ........................................................................42
Lab 5 Software Upgrades .......................................................................................................43
Overview ......................................................................................................................43
Section A: Download Device CommWare ..............................................................44
Section B: Download CommWare from Web ........................................................46
HP IMC Installation and Administration Professional Training
2 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section C: Upgrade a Device ...................................................................................47
Lab 6 Network Traffic Analyzer ..............................................................................................49
Overview ......................................................................................................................49
Section A: Configure sFlow on Switch using CLI ....................................................50
Section B: Configure sFlow on iMC .........................................................................51
Section C: Review Application Traffic .....................................................................57
Lab 7 ACL Manager ................................................................................................................58
Overview ......................................................................................................................58
Section A: Configure ACL to stop Pings ..................................................................59
Section B: Deploy ACL ...............................................................................................62
Section C: Test ACL ....................................................................................................63
Lab 8 VLAN Manager .............................................................................................................64
Overview ......................................................................................................................64
Section A: Configure Vlans .......................................................................................65
Section B: Review Vlans ............................................................................................67
Lab 9 Alarms ..........................................................................................................................68
Overview ......................................................................................................................68
Section A: Review Alarms .........................................................................................69
Section B: Acknowledge Alarms ..............................................................................70
Section C: Review Syslog ..........................................................................................71
Lab 10 Reports .........................................................................................................................72
Overview ......................................................................................................................72
Section A: Review Reports .........................................................................................73
Section B: Schedule Reports ......................................................................................74
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 3
Lab 0 How to connect to the IMC Network
Overview
In this lab, you will complete the following tasks:
How you access the IMC Network
Overview of the IMC Network
Section A - How to access the IMC Network
To access the IMC Network follow the steps below
1. Access the following URL http://labs.usa.hp.com
2. Login with the details provided
HP IMC Installation and Administration Professional Training
4 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B - Network Infrastructure Details
Each POD consists of two IMC Servers, Server A and Server B which are then
connected to a host of switches. See the diagram below to show how the Servers are
connected to the switches and note the interface connections.
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 5
The table below shows the equipment on the network for each POD and interface
connections
Note both the IMC Servers and all Switches are accessed via the Console Port
SYSTEM
NAME
LAB DEVICES IP ADDRESS MASK
Server A Windows
2008 R2
Server
192.168.1.1 255.255.255.0
CISCO A Cisco 3750 192.168.1.10 255.255.255.0
HP 5800 D HP 5800 192.168.1.20 255.255.255.0
HP 3500 F HP 3500 192.168.1.30 255.255.255.0
PC A PC A 192.168.1.40 255.255.255.0
Server B Windows
2008 R2
Server
192.168.2.1 255.255.255.0
CISCO B Cisco 3750 192.168.2.10 255.255.255.0
HP 5800 C HP 5800 192.168.2.20 255.255.255.0
HP 3500 E HP 3500 192.168.2.30 255.255.255.0
PC B PC A 192.168.2.40 255.255.255.0
Please note that these are sample IP addresses on the IMC Servers and Switches,
HPVL allows you to modify these addresses according to your environment.
HP IMC Installation and Administration Professional Training
6 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section C - Getting the IMC Network ready
Follow the steps below to set up your network ready for IMC
1. Connect to your IMC Server and set an IP address as per the table above or to
suit your requirements. Note DO NOT TOUCH THE IP ADDRESS MARKED DO
NOT MODIFY
2. Connect to each switch and reset the switch to factory defaults
Cisco Switch erase start-up configuration
HP A-Series reset saved-configuration
HP E Series erase start-up configuration
3. Connect to your switches and ensure that the interfaces on each Switch as per
the Network Diagram on Page 4 are in a UP state
Cisco Switch:
Go to enable mode
Go to conf t mode
show interfaces status
If interfaces are down need to do a no shutdown
HP A-Series:
From System View display interface brief
If interfaces are down need to do a undo shutdown
HP E-Series:
Go to conf mode
show interface brief
If interfaces are down need to do a interface x enable
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 7
4. Ensure that all interfaces are untagged members of VLAN 1initially
Cisco Switch: show vlan brief
HP A Switch: display vlan all
HP E Switch: show vlans
5. Assign an IP address on VLAN 1 on each Switch and ensure that the VLAN is in
a UP state as follows, use the table to on Page 5 & 6 to assign IP addresses or
choose IP addresses to suit your requirements.
Cisco Switch: interface vlan 1
ip address 192.168.1.1x 255.255.255.0
show ip interface brief
HP A Switch: interface vlan 1
[interface vlan 1] ip address 192.168.1.2x 24
display ip interface brief
HP E Switch: vlan 1 ip address 192.168.1.3x 255.255.255.0
show vlan ip
6. Perform a PING from the IMC Server to each Switch to ensure that they are
reachable
HP IMC Installation and Administration Professional Training
8 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
7. Enable Telnet on each switch
Cisco Switch:
username <name> privilege <15> password <password>
line vty 0 4
login local
HP A Switch:
local-user <username>
password simple <password>
service-type telnet level 3
user-interface vty 0 4
[user-interface vty 0 4] authentication-mode scheme
HP E Switch
password manager user-name <name> plaintext <password>
password operator user-name <name> plaintext <password>
Save configuration on all of your switches, rename the CFG file to imc.cfg
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 9
Section D - Configuring SNMP for IMC
Before you can discover your devices in IMC you need to create new read/write
community strings on your switches
Note the Trap Destination address for IMC will be added when IMC discovers the
devices
Cisco Switch:
snmp-server community <new string> ro
snmp-server community <new string> rw
snmp-server location <your location>
snmp-server contact <your contact>
snmp-server enable traps
snmp-server host <IMC IP address> version v1 <public community string>
HP A Switch:
snmp-agent community read <new string>
snmp-agent community write <new string>
snmp-agent sys-info location <your location>
snmp-agent sys-info contact <your contact>
snmp-agent traps enable
snmp-agent sys-info version all
HP IMC Installation and Administration Professional Training
10 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
HP E Switch:
snmp-server community <new string> operator restricted
snmp-server community <new string> manager unrestricted
snmp-server location <your location>
snmp-server contact <your contact>
Section E - Configuring your Switches to point to the IMC Syslog Server
IMC has a built in Syslog server that is enabled by default, in order to send Syslog
events from your switches to IMC you need to point your switches to the IMC server as
follows:
Cisco Switch: logging <ip address of IMC server>
HP A Switch: info-center loghost <ip address of IMC server>
HP E Switch: logging <ip address of IMC server>
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 11
Lab 1 Install Intelligent Management Console
Overview
IMC Standard version 5.0 and SQL Express 2008 have already been installed and
IMC is running on Server A and Server B in each POD
In this LAB the Instructor will demonstrate the installation of IMC and the Embedded
SQL Express 2008 database on the Instructor PC to guide you through the installation
process and go through some of the pointers below during the installation.
The IMC Installation for this course has all of the base IMC Components and the SQL
Database on the same server, use the pointers below as discussion items between you
and the Instructor.
- Identify the IMC installation requirements i.e. Microsoft Net Framework and at
least 512MB of memory
- Identify the IMC components and ensure that all components are checked at the
time of deployment
- Since there is no SQL Client or existing SQL database on this machine IMC
proceeds to install the embedded database i.e. SQL Express
- The embedded database has a limit of 10GB
- Option to change the default ports 8080 and 8443 at the time of install
- Once installed launch the Deployment Monitoring Agent (DMA) and click on
Start to start IMC
- Go to the Process tab and see all of the processes starting, the last process to
start is jserver.exe
- Explore the Environment tab in particular the Database version and the Back Up
and Configuration tab
HP IMC Installation and Administration Professional Training
12 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Installation Summary>Install
Installation Summary>Install
Batch Deploy>OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 13
Section B: Install MS SQL
STEP 1 Install MS SQL 2008 Express (20 min)
Database Configuration Info>Pick Install Embedded
Database>Next
Configure Web Service Port>Deploy
Intelligent Deployment Monitoring Agent (DMA)>Pick View
readme file/ Start iMC Server>OK
HP IMC Installation and Administration Professional Training
14 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section C: Setup DMA
STEP 1 Setup DMA for automatic start
Intelligent Deployment Monitoring Agent (DMA)>Pick
automatically start the services when the OS starts>Start
IMC
End of IMC lab
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 15
Lab 2 Discover Devices
Overview
In this lab, you will complete the following tasks:
Configure an Operator
Add a device
Discover a network
Review your network
HP IMC Installation and Administration Professional Training
16 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section A: Add a device to IMC
STEP 1 Login into IMC
WindowsClient
Open Browser>http://<Windows Server>:8080
Operator: admin
Password: admin
STEP 2 Become familiar with your IMC installation
Review the different Tabs
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 17
Define SNMP in accordance with the SNMP Version and Community Strings created in LAB 0
WindowsClient-IMC
System>Resource Management>SNMP Template
Default
HP IMC Installation and Administration Professional Training
18 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
STEP 3 Define Telnet in accordance with the steps in LAB 0
WindowsClient-IMC
System>Resource Management>Telnet Template
Add
Name: MYTEMPLATE
Authentication Mode: Username and Password
Username: <As defined in LAB0>
Password: <As defined in LAB0>
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 19
Define SSH This is optional, if you configure an SSH Template you will first need to
enable SSH on your Switches and define a username and password and change the Login
Type in IMC to SSH instead of Telnet.
WindowsClient-IMC
System>Resource Management>SSH Template
Add
Name: ADMIN
Authentication Mode: Username and Password
Username: admin
Password: hp
HP IMC Installation and Administration Professional Training
20 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
STEP 4 Define Device Group
WindowsClient-IMC
System>Group Management>Device Group
Add
Group Name: PodX
Description: Pod X equipment
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 21
STEP 5 Define an Operator
WindowsClient-IMC
System>Operator Management>Operator
Add
Login Name: StudnetPodX
Description: Student PodX
Authentication Type: Password
Password: hp
Confirm Password: hp
Operator Group: Maintainer Group
OK
HP IMC Installation and Administration Professional Training
22 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Define Manageable Product: StudnetPodX
Pick: PodX
OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 23
STEP 6 Add your HP A-Series Switch device
WindowsClient-IMC
Resource>Add Device>
Host Name IP: <HP A Series Switch>
Login Type: Telnet
HP IMC Installation and Administration Professional Training
24 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Telnet Setting>Configure
Pick>Select an Existing Template
OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 25
STEP 7 Review HP A Switch details
Device Details
HP IMC Installation and Administration Professional Training
26 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Discover what each action does except- Un manage and
Delete
Is there any CPU Utilization data?
______________________________________________
Is there any Memory Utilization data?
____________________________________________
Is there any Device Response Time data?
________________________________________
Is there any Unreachability data?
________________________________________________
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 27
STEP 8 Logout and log back in as studentpodx
WindowsClient-IMC
Logout
Open Browser>http://<Windows Server>:8080
Operator: studentpodx
Password: hp
Why is it empty? How do we fix it?
HP IMC Installation and Administration Professional Training
28 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
STEP 9 Logout and log back in as admin
Open Browser>http://<Windows Server>:8080
Operator: admin
Password: admin
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 29
STEP 10 Add HP A Series Switch to Device Group Managed by studentpodX
System> Device Group> All Devices
Pick: <HP A-Series Switch IP address>
Pick: <PodX>
OK
HP IMC Installation and Administration Professional Training
30 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
STEP 11 Logout and log back in as studentpodx
WindowsClient-IMC
Logout
Open Browser>http://<Windows Server>:8080
Operator: studentpodx
Password: hp
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 31
Section B: Add a subnet range to IMC
STEP 1 Add your POD subnet to IMC or whatever IP address has been chosen
Resource>Auto Discovery
Start IP: 192.168.1.10 or 192.168.2.10 or
whatever IP address has been chosen
End IP: 192.168.1.50 or 192.168.2.50 or
whatever IP address has been chosen
Pick: Automatically register to receive
SNMP Read: public (specific to your SNMP Template)
SNMP Write: private (specific to your SNMP Template)
Telnet Authentication: Username + Password
Telnet Username: admin (Specific to your Telnet Template)
Telnet Password: hp (Specific to your Telnet Template)
Schedule: Never
Add
POD Subnet Range
1 192.168.1.10 to 192.168.1.50
2 192.168.2.10 to 192.168.2.50
HP IMC Installation and Administration Professional Training
32 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Auto Discovery
End of Discovery lab
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 33
Lab 3 Resource Tab
Overview
In this lab, you will complete the following tasks:
View Snapshot
Review Network Topology
Review Device Status
Review Device Details
HP IMC Installation and Administration Professional Training
34 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section A: Resource Tab
STEP 1 View SnapShot
Resource
Are all of your discovered devices listed? ______________
What color is/are the device headings? ______________
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 35
How many of the following do you have in your network?
Routers __________ Switches ________ Servers _________ Desktops _______ Others_______
Is there any CPU Utilization data? ______________________________________________
Is there any Memory Utilization data? ____________________________________________
Is there any Device Response Time data? ________________________________________
Is there any Unreachability data? ________________________________________________
Is there any Incoming Interface Bandwidth Utilization data? __________________________
Is there any Outgoing Interface Bandwidth Utilization data? ___________________________
HP IMC Installation and Administration Professional Training
36 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Network Topology
STEP 1 View Network Topology
Resource>Network Topology
My Network View
End of Resource Tab lab
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 37
Lab 4 Configuration Backups
Overview
In this lab, you will complete the following tasks:
Backup configuration for a Device, immediately
Schedule Backup of Device configuration
Compare Device configurations
HP IMC Installation and Administration Professional Training
38 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section A: Immediate Backup
STEP 1 Review Device Details of the Switches
Resource>Switches
Device Detail>Configuration Management
Click here to backup configuration file of the device now
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 39
STEP 2 Add remaining devices
Service>Configuration Center
Select All
Backup Configuration
HP IMC Installation and Administration Professional Training
40 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Scheduled Backup
STEP 1 Generate Automatic Backups
Resource>Switches>HP A-Series Switch>Device Detail>Configuration
Management
Click here to quickly add an auto backup device
Name: Daily
Operation Frequency: Every Day 23:30:00
Description: Every Day at 11:30pm
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 41
STEP 2 Add all devices to Daily Backup
Service>Configuration Center>Auto Backup Plan
Daily
HP IMC Installation and Administration Professional Training
42 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section C: Compare Configurations
STEP 1 Compare Access Switch Configurations
Service>Configuration Centre>Compare Configuration
Select Device: Switch-XA
Select Device: Switch-XB
OK
End of Configuration Backups lab
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 43
Lab 5 Software Upgrades
Overview
In this lab, you will complete the following tasks:
Backup Software from Devices
Download Software from Web
Upgrade/ Downgrade for Devices
HP IMC Installation and Administration Professional Training
44 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section A: Download Device CommWare
STEP 1 Import CommWare from Devices
Service>Configuration Center>Software Library
Add
Pick: Import from Device
Add Device
Select ALL
OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 45
HP IMC Installation and Administration Professional Training
46 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Download CommWare from Web
STEP 1 Download CommWare
The software can be found on the IMC Server machines in the
directory called 5800 Software.
STEP 2 Add imported File
Service> Software Library>Import Software
Browse (to File)
OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 47
Section C: Upgrade a Device
STEP 1 Upgrade Switch 5800 Switch
Service>Configuration Center>Software Library
Deploy
Pick: Software for 5800
Set the Current Running Software as Backup
Restart Device after Deployment
Next
Task Name: Update Switch 5800
Schedule Time: Immediate
Schedule Sequence: Concurrent
Task Description: reload code
OK
HP IMC Installation and Administration Professional Training
48 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Finish
Validate Execution
If you have speakers, the Alarms will actually be heard of the
device being rebooted, well get to Alarms soon
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 49
Lab 6 Network Traffic Analyzer
Overview
In this lab, you will complete the following tasks:
Configure Device to provide sFlow
Configure iMC NTA to collect
Review Data gathered
Use the TFTP Gen Traffic generation tool in the C:/KITS directory on IMC
Server and IMC Server B to generate traffic for NTA.
Note you can also kick off a back up configuration on a switch to generate
traffic also.
HP IMC Installation and Administration Professional Training
50 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section A: Configure sFlow on Switch using CLI
STEP 1 Telnet or Console into SwitchXA
STEP 2 Configure sFlow on Server and PC ports
HP A Series Switch 5800
sflow collector <Integer 1-10> ip <IMC IP Address>
sflow agent ip <Switch IP address>
interface GigabitEthernet 1/0/1
sflow enable inbound
sflow enable outbound
sflow sampling-rate 1000
interface GigabitEthernet 1/0/2 This is the interface that you wish to
monitor sflow traffic on
sflow counter collector <id of collector>
Optional parameters are Sampling Rate and Sampling Mode
STEP 3 Verify sflow Port
Switch 5800
display sflow
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 51
Section B: Configure sFlow on iMC
STEP 1
The software can be found on the IMC Server machines in the
directory called NTA Module.
STEP 2 Install and Deploy NTA (may take up to 15 minutes)
DMA>Install point to install/windows/components
Locate unzipped NTA install directory
Batch Deploy all Components
HP IMC Installation and Administration Professional Training
52 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
OK
STEP 3 Configure NTA device on iMC
Service>Traffic Analysis and Audit>Settings
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 53
Device Management
Select Switch 5800
STEP 4 Add Device to Server Management
Server Management
Modify
HP IMC Installation and Administration Professional Training
54 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Pick: Switch 5800
Deploy
Return
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 55
STEP 5 Add interfaces to Task Management
Traffic Analysis Task Management>Add>Interface
Task Name: NTA test
Task Description: NTA test
Select Interface Information
Pick: Interfaces as per Network Diagram on Page 5 these will be
interfaces that are connected to Server A and Server B
HP IMC Installation and Administration Professional Training
56 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 57
Section C: Review Application Traffic
STEP 1 Review Task
Traffic Analysis Task Management>Interface Traffic>NTA Test
End of Network Traffic Analyzer lab
HP IMC Installation and Administration Professional Training
58 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Lab 7 ACL Manager
Overview
In this lab, you will complete the following tasks:
Configure an ACL
Deploy ACL
Test ACL
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 59
Section A: Configure ACL to stop Pings
STEP 1 Configure ACL on the Switch 5800
Service>ACL Management>Quick Start
ACL Resources>Add
ACL Identity Type: Number
ACL Type: Advanced
ACL Identifier: 3001
ACL Resource Name: BlockPing
HP IMC Installation and Administration Professional Training
60 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
ACL Identifier 3001>Add
Add Rule
Protocol: ICMP
Action: deny
Source Address: All
Destination Address: All
OK
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 61
Add Rule
Protocol: ICMP
Action: deny
Source Address: All
Destination Address: All
OK
HP IMC Installation and Administration Professional Training
62 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Deploy ACL
STEP 1 Deploy 3001 ACL onto HP A-Series Switch 5800
Deploy
Select HP A-Series Switch 5800
Select 3001
Next
Deploy
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 63
Section C: Test ACL
STEP 2 Ping HP A-Series Switch
Ping HP A-Series Switch from any Device
End of ACL Manager lab
HP IMC Installation and Administration Professional Training
64 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Lab 8 VLAN Manager
Overview
In this lab, you will complete the following tasks:
Configure VLANs
Deploy VLANs
Review VLANs
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 65
Section A: Configure Vlans
STEP 1 Add Vlans
Service>VLAN Management>Quick Start
Global VLAN
Add VLAN
VLAN ID: 11
VLAN NAME: VLAN 11
Submit
Back
POD VLANS
1 11,21,31
2 12,22,32
3 13,23,33
4 14,24,34
HP IMC Installation and Administration Professional Training
66 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
STEP 2 Repeat Step 1 for remaining VLANS
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 67
Section B: Review Vlans
STEP 1 View Vlans
Service>VLAN Management>VLAN Topology
VLAN View
VLAN 11
End of VLAN Manager lab
HP IMC Installation and Administration Professional Training
68 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Lab 9 Alarms
Overview
In this lab, you will complete the following tasks:
Review Alarms
Acknowledge Alarms
Review Syslog
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 69
Section A: Review Alarms
STEP 1 View Alarms
Status Bar>Alarm
Pick: Any Alarm greater than Zero
HP IMC Installation and Administration Professional Training
70 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Acknowledge Alarms
STEP 1 Accept Alarm
Pick: Any Alarm
Click Acknowledge
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 71
Section C: Review Syslog
STEP 1 View Syslog
End of Alarms lab
HP IMC Installation and Administration Professional Training
72 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Lab 10 Reports
Overview
In this lab, you will complete the following tasks:
Review Device Reports
Review Capacity Reports
Review Inventory Reports
Schedule Report delivery via email
Lab Guide
HK643S D.00 2012 Hewlett-Packard Development Company, L.P. 73
Section A: Review Reports
STEP 1 Review Reports
Report>Report Template List
Capacity Report
Changes Report
Inventory Report
HP IMC Installation and Administration Professional Training
74 2012 Hewlett-Packard Development Company, L.P. HK643S D.00
Section B: Schedule Reports
STEP 1 Schedule Reports
Report>Add Scheduled Report
Select>Inventory Report
End of Reports lab