Академический Документы
Профессиональный Документы
Культура Документы
1400
KAT-A 2410-EA-XL
Product characteristics and benefits
Face-to-face length acc. to EN 558-1, basic series 20 (DIN 3202 / K1)
With flange end acc. to EN 1092-2, PN 10
Full-flange design, both as wafer type and for pipeline end installation, without
additional counter flange at full differential pressure
Full-flange design with unrestricted flow passage
Leakproof from both flow directions
Specially shaped horizontal sealing with double quad ring profile and integrated
PTFE sliding rails for reducing operation forces
Scraper installed on both sides of the plate to clean the knife
With electric actuator
Materials
Body parts, bearing plate and gland: Cast iron EN-JL 1040 (GG 25)
Knife: Stainless steel 1.4301
U-sealing and horizontal sealing: Elastomer (NBR)
Tests and approvals
Fittings: Stainless steel A2 (DIN EN ISO 3506)
Final inspection test acc. to EN 12266
(DIN 3230 Part 4)
Yoke and sheet metal covering: Stainless steel 1.4301
Stem: Stainless steel 1.4021
Note Corrosion protection
Cast iron parts: Epoxy coated For information about thread depths and
bolt/screw lengths, please refer to the
Versions
relevant Installation and Operating
Instructions.
Standard version as described
Gate: Stainless steel 1.4571
For proper installation and safe operation
please ensure that you read the
installation and operation instructions:
Stem: Stainless steel 1.4057
Field of Application
KAT-B 2410-EA
Chamber installation
Installation in plants
Waste water system
Pressure test acc. to EN 12266 Field of application
Test pressure seat with
water
Test pressure body with
water
Maximum operating
temperature for neutral
liquids
Maximum operating
pressure
PN DN
[bar] [bar] [C] [bar]
4 6 50 4 10 700...800
2.5 3.75 50 2.5 10 900...1000
2 3 50 2 10 1200...1400
Tightness only ensured up to maximum admissible operating pressure!
Knife Gate Valves and Penstocks 1
We reserve the right to make technical changes and use similar or
higher-quality materials. Drawings are non-binding. www.vag-group.com
Edition KAT-A_2410-EA-XL_ZETA-XL-EA-from-DN700_Edition7_31-01-2013_EN
VAG ZETA