SICE Pesaro (ITALY) The signal light is light alloy casting (copper lower than 0,04%) and features a special protective treatment for sea climates. It comes complete with very resistant tempered glass dioptric lens (homologated by GGG) and equipped with an internal double filament st lamp. The reserve filament starts to work when the 1 filament is damaged (by the control circuit). Due to its high resistance against corrosion, this signal light is the ideal solution for any problem concerning signalling obstruction in difficult conditions and is suitable for buoys and platforms. It is normally used as a main white signal light with a range of 10 nautical miles. The signal light is EEx-ed execution (INERIS certificate) with IP 66 protection degree, suitable for installation in classified areas. Its an entirely sealed tropical type construction, having a thermic drift with a range from -20 to +55C. The total life of the double filament lamps is 5 years approx (U code), in this time the signal light doesnt require maintenance. The control circuit can be installed inside a centralized control panel or locally in the same signal light. The standard working voltage is 24VDC. The flashing code can be changed by replacing the programmed MCU inserted in the control circuit. It can be supplied with an optional mechanical galvanized steel support with standard or customized dimensions. Also these supports feature special protective treatment for sea climates. MAIN TECHNICAL / MECHANICAL DATA - Main signal lights type LS-300/2FE - Manufacturer SICE Pesaro Italy - Power supply voltage 24 VDC (other voltage on request) - Input power 75 W durig flashing / 1 W stand-by - Standard codified light Morse U code (other code on request) - Luminous intensity 1400 cd approx (U code) - Luminous range 10 nautical miles (IALA, white light) - Horizontal emission 360 degree - Lamp type C8-double filament, 75 + 75W - Lamp life 5 years at 24 VDC (U code) - Dioptric drum "GGG-300" - Diameter = 300 mm. (Tempered glass) - Signal light body Alluminium anticorrosive casting - Certificate INERIS 02 ATEX 0085X EEx ed IIB T3 CE - 0080 - Ex II 2G - Installation Suitable for Zone 1 and 2 - Protection degree IP 66 - Painting cycle SICE SPC 0297 rev. 2 (polyuretanic, standard color RAL-9010) - Total height mm. 620 - Base diameter mm. 360 - Signal light weight Kg. 26 - Ambient temperature -20C / +55C - Control circuit and photocell Included or outside in the centralized control panel ATEX CERTIFIED SICE Pesaro (ITALY) NAVI GATI ON AI D SYSTEM EQUI PMENT LS-300/ 2FE TEN-MI LE WHI TE MAI N SI GNAL LI GHT OPT (4) ATEX CERTIFIED DOUBLE FILAMENT LAMP TYPE LF2 75+75W (C8) CERTIFIED: INERIS 02 ATEX 9005 U EEx d IIB IP65 Ex II 2G PHOTOCELL TYPE FTC CERTIFIED: INERIS 02 ATEX 9006 U EEx d IIB IP66 Ex II 2G ATEX CERTIFIED OPT (1) MECHANICAL SUPPORT FOR THE MAIN SIGNAL LIGHT OPT (2) MECHANICAL SUPPORT FOR THE MAIN AND SECONDARY SIGNAL LIGHT MECHANICAL SUPPORTS (OPTIONAL) OPT. (1) PF support pole suitable for one signal light OPT. (2) PF/2 support pole suitable for two signal lights