0 оценок0% нашли этот документ полезным (0 голосов)
464 просмотров6 страниц
This document contains technical specifications for electronic equipment produced by EEI srl, including:
1. Applicable standards for quality management, safety directives, and harmonized standards for electronic equipment design.
2. General electrical specifications for mains voltage, frequency, auxiliary voltages.
3. Installation requirements for operating temperature, storage, humidity, altitude, and IP degree.
4. Specifications for a 500kW photovoltaic inverter including AC/DC parameters, weight, dimensions, environmental conditions, and exclusions from scope of supply.
This document contains technical specifications for electronic equipment produced by EEI srl, including:
1. Applicable standards for quality management, safety directives, and harmonized standards for electronic equipment design.
2. General electrical specifications for mains voltage, frequency, auxiliary voltages.
3. Installation requirements for operating temperature, storage, humidity, altitude, and IP degree.
4. Specifications for a 500kW photovoltaic inverter including AC/DC parameters, weight, dimensions, environmental conditions, and exclusions from scope of supply.
This document contains technical specifications for electronic equipment produced by EEI srl, including:
1. Applicable standards for quality management, safety directives, and harmonized standards for electronic equipment design.
2. General electrical specifications for mains voltage, frequency, auxiliary voltages.
3. Installation requirements for operating temperature, storage, humidity, altitude, and IP degree.
4. Specifications for a 500kW photovoltaic inverter including AC/DC parameters, weight, dimensions, environmental conditions, and exclusions from scope of supply.
Capitale Sociale 104.000,00 int.vers. Reg. Imp. VI 00604040246 REA VI 139843 C.F. e P.IVA IT 00604040246 Direzione e Coordinamento: Elcomit S.p.A.
CREI Ven
ANNEX A Technical Specifications
1. Applicable Standards The EEI srl quality system complies with UNI EN ISO 9001 (certificate n. 3562/00 dated 27/07/2000). Electronic equipment made by EEI complies with the following European community directives including latest amendments:
Council Directive 73/23/EEC dated 19/02/1973 (Low Voltage Directive) Council Directive 93/68/EEC dated 22/07/1993 (CE Marking Directive)
The following harmonised Standards have been applied to electronic equipment design and construction: CEI EN 60204-1: Safety of machinery. Electrical equipment of machines. Part 1: General requirements. CEI EN 50178, 1999: Electronic equipment for use in power installations CEI EN 60146-1-1, 1997: Semiconductor converters General requirements and line commutated converters Part 1-1: Specification of basic requirements CEI EN 61000-6-2 Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments CEI EN 61000-6-4, 2007: Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments.
2. General Electrical Specifications Mains voltage: 320 Vac 10% Frequency : 50Hz +4% / -6% Auxiliaries voltage: 230 Vac 10% from the customer by UPS Fan auxiliary supply voltage: 400 Vac 10%
3. Installation Operating temperature: 0C 50 C Storage temperature: 0C 55 C Relative humidity: 95% @ 40C no condensing Altitude: <1500 m a.s.l. Air pollution: reduced dust content, to be placed in conditioned control room IP degree: IP21
Notes The equipment must be stored in a ambient without condensing humidity Technical performance mentioned above refer: to the proper installation conditions to the proper erection and commissioning respect of the scheduled maintenance All the above mentioned points refer to the user and maintenance manual that will be provided by EEI
4. Inverter for Photovoltaic application PV Inverter Modular electrical cabinet made of 20/10 steel sheet. Frontal accessibility through doors fitted with lock and key. Side and rear accessibility through bolted panels.
Each cabinet will have the following main characteristics, as per attached one line diagram:
Grid side 3P disconnector Grid side contactor Filter (LC) PV Inverter composed by: Power circuit with IGBT air cooled (Insulated Gate Bipolar Transistors) Film capacitors Microcontroller and DSP software for the digital management of all control parameters, alarms, diagnostics, signal I/O analog and digital PV side Disconnector PV side Fuses Surge suppressors grid side and PV side 230Vac auxiliary voltage from UPS provided by the customer 400Vac auxiliary supply voltage for cabinet fan HMI unit
Safety and reliability An insulation shielded transformer LV/MV for the connection to the mains is required and it is not included in the scope of supply.
Auxiliary and control circuits: Auxiliary relay set. Auxiliary 230Vca/24 VDC power supply.
Circuit Breakers, for internal fans protection. Circuit-breakers for auxiliary circuits. Terminal block for power cables and signal cables.
Interface and communication Communication protocol is MODBUS RS485
Factory test Routine Tests are included;
Documentation Following documentation will be provided: Electrical drawing, according to IEC norms. Complete Conversion System user manual User and maintenance manual
Exclusions Supply, erection and commissioning of PV modules String Diodes String Boxes EMC filter Grid interface rel and safe protection devices DC cables and string cabling Design and certification of grounding system. Geological studies, excavation and foundation works. Cabling between inverters and DC main combiner Cabling and connection on AC side of inverters LV/MV transformer LV cabinet MV switchgear Lightening protection Expenses for travel, boarding and lodging for training course attendees if any. Everything not explicitly mentioned in the present supply proposal and annexure
Technical specifications of the Air cooled PV Inverter
Model 8YF500QNAF40
AC Output Parameters Rated AC power 500 kW Rated Voltage ( 10 %) 320 V Rated Frequency (+ 4% - 6%) 50 Hz Corrente C.A. nominale 950 A Power Factor 0,95 Grid type 3P TI THD(I) < 3 %
DC Input Parameters DC input with independent MPPT 1 Maximum input power 500 kW MPPT input Voltage range 5000850 V DC Voltage: rated/maximum 650 /1000 V DC Current: rated 1100 A (6 x 185 A) Surge Suppressors Included DC fuses Included
Weight and dimensions (estimated) L / H / D 1680/2310/600 mm Weight 1700 kg
Auxiliary UPS grid AC voltage, current, type 230 V - 0,65 A - 1F Fan auxiliary voltage 400 V - 1,7 A - 3F
Environmental condition Operative temperature range -10C / +50C Storage temperature range -15C / +55C