Академический Документы
Профессиональный Документы
Культура Документы
Fo
r
PT
In
te
rn
al
U
se
nl
y
nl
y
O
U
se
al
te
rn
Fo
r
PT
In
In
te
rn
al
U
se
nl
y
The course you are about to take will expose you to a number of learning
offerings that PTC University has available. These include:
Fo
r
PT
O
U
se
Europe
nl
y
al
Asia
te
rn
Fo
r
PT
In
In addition, you can access the PTC Web site at www.ptc.com. Our Web
site contains the latest training schedules, registration information, directions
to training facilities, and course descriptions. You can also reach technical
support, and register for online service options such as knowledge base
searches, reference libraries, and documentation. You can also find general
information about PTC, PTC Products, Consulting Services, Customer
Support, and PTC Partners.
Precision Learning
Precision Learning in the Classroom
PTC University uses the Precision Learning methodology to develop
effective, comprehensive class material that will improve the productivity
of both individuals and organizations. PTC then teaches using the proven
instructional design principal of Tell Me, Show Me, Let Me Do:
nl
y
U
se
al
At the end of the class, you will either take a Pro/FICIENCY assessment via
your PTC University eLearning account, or your instructor will provide training
on how to do this after the class.
te
rn
In
Each student that enrolls in a PTC class has a PTC University eLearning
account. This account will be automatically created if you do not already
have one.
As part of the class, you receive additional content in your account:
Fo
r
PT
Fo
r
PT
In
te
rn
al
U
se
nl
y
PTC uses a role-based training approach. The roles and the associated
training are graphically displayed in a curriculum map. Curriculum maps are
available for numerous PTC products and versions in the training section of
our Web site at http://www.ptc.com/services/edserv/learning/paths/index.htm.
Please note that a localized map may not be available in every language and
that the map above is partial and for illustration purposes only.
Before the end of the class, your instructor will review the map
corresponding to the course you are taking. This review, along with instructor
recommendations, should give you some ideas for additional training that
corresponds to your role and job functions.
Training Agenda
Day 1
Module
Module
Module
Module
Module
01
02
03
04
05
Introduction to Piping
Creating Piping Assembly Structures
Configuring and Routing Pipelines
Moving and Modifying Pipelines
Configuring and Inserting Fittings
nl
y
Day 2
U
se
Module 06
Module 07
Module 08
Module 09
Module 10
Module 11
al
Day 3
In
Fo
r
PT
Module 16
Module 17
te
rn
Module 12
Module 13
Module 14
Module 15
Fo
r
C
PT
In
al
te
rn
U
se
nl
y
Table of Contents
Piping using Creo Parametric 2.0
nl
y
Introduction to Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding Piping Design Methods . . . . . . . . . . . . . . . . . . . . . . .
Manual Piping Development Process . . . . . . . . . . . . . . . . . . . . . . . .
Specification-Driven Piping Development Process . . . . . . . . . . . . . .
Understanding Piping Terminology . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding 2-D Schematic Piping Designs . . . . . . . . . . . . . . . . .
1-1
1-2
1-3
1-5
1-7
1-9
te
rn
al
U
se
In
PT
Fo
r
5-1
5-2
5-4
5-8
U
se
nl
y
te
rn
al
PT
In
Fo
r
Fo
r
PT
In
te
rn
al
U
se
nl
y
Fo
r
C
PT
In
al
te
rn
U
se
nl
y
nl
y
In this topic, you learn about the course handbook layout and
the header used to begin each lab in Creo Parametric.
U
se
Fo
r
PT
In
te
rn
al
Modules
Topics
Concept
Theory
Procedure
Exercise (if applicable)
nl
y
U
se
te
rn
al
In
PT
Click Close
Fo
r
4.
5.
6.
7.
Task Name Labs are broken into distinct tasks. There may be one
or more tasks within a lab.
Lab Steps These are the individual steps required to complete
a task.
nl
y
Before you begin a lab from any training course, it is important that you
configure Creo Parametric to ensure the system is set up to run the lab
exercises properly. Therefore, if you are running the training labs on a
computer outside of a training center, follow these three basic steps:
Fo
r
PT
In
te
rn
al
U
se
Extract the class files zip file to a root level drive such as C: or D:.
The extracted zip will create the default folder path automatically, such
as C:\PTCU\CreoParametric2\.
Locate your existing Creo Parametric shortcut.
Copy and paste the shortcut to your desktop.
Right-click the newly pasted shortcut and select Properties.
Select the Shortcut tab and set the Start In location to be the same as
the default folder. For example, C:\PTCU\CreoParametric2\.
Start Creo Parametric using the newly configured shortcut.
The default working directory will be set to the CreoParametric2 folder.
You can then navigate easily to the functional area and topic folders.
SampleFunctionalArea\Topic1_Folder
nl
y
Step 1:
EXTRUDE_1.PRT
Perform this task only if you are running the labs on a computer
outside of a training center, otherwise proceed to Task 2.
U
se
1. Extract the zipped class files to a root level drive such as C: or D:.
The extracted ZIP will create the default folder path automatically,
such as C:\PTCU\CreoParametric2.
te
rn
al
Close all open windows and erase all objects from memory to
avoid any possible conflicts.
PT
Step 2:
In
Fo
r
Step 3:
Browse to and expand the functional area folder for this procedure
and set the folder indicated in the header as the Creo Parametric
working directory.
te
rn
al
U
se
nl
y
Fo
r
PT
In
U
se
nl
y
te
rn
Step 4:
al
In
Fo
r
PT
2. You are now ready to begin the first task in the lab:
Read the first task.
Perform the first step, which in most cases will be to set the initial
datum display for the procedure or exercise.
Perform the remaining steps in the procedure or exercise.
Step 5:
1. The instruction for setting the datum display indicates which Datum
Display types to enable and disable. For example, Enable only the
following Datum Display types:
2. To set the datum display, first click the Datum Display drop-down
menu from the In Graphics tool
bar.
nl
y
Fo
r
PT
In
te
rn
al
U
se
Fo
r
C
PT
In
al
te
rn
U
se
nl
y
1
nl
y
Module
Introduction to Piping
U
se
Module Overview
PT
Objectives
In
te
rn
al
Fo
r
2012 PTC
Module 1 | Page 1
nl
y
U
se
al
Figure 2 Specification-Driven
Piping Design Example
PT
In
te
rn
Specification-Driven Piping
Fo
r
Within Creo Parametric, there are two methods you can use to develop 3-D
piping designs:
Manually routed piping (non-specification-driven piping)
Specification-driven piping
Non-Specification-Driven Piping
This method of piping design enables maximum flexibility and involves
configuring pipeline stock and manually routing pipes and inserting fittings.
It typically applies to flexible piping designs and tubing.
Specification-Driven Piping
Piping design as utilized by designers in the Plant design, Shipbuilding, and
Aerospace design industries.
This method of piping design is driven by a set of piping specifications
and design rules.
Module 1 | Page 2
2012 PTC
U
se
nl
y
al
te
rn
Fo
r
PT
In
Module 1 | Page 3
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 1 | Page 4
2012 PTC
In
te
rn
al
U
se
nl
y
PT
Fo
r
Module 1 | Page 5
nl
y
Creating Project-Specific Data files involves assigning piping data from the
MCAT files for each new project specification. The project-specific data
can be stored in the following files:
Specification Directory Files: Store all piping specifications, mnemonics,
colors, layers, insulation codes, and assigned Auto-Selection files that
have been selected for a piping project.
Auto-Selection Files: Contain all selected pipes, fittings, bends, miters,
and assembly fittings for a piping project.
Insulation Directory Files: Contain all selected insulation files, insulation
codes, and colors for a piping project.
Routing Pipelines and Inserting Fittings is a semi-automatic process. Only
assigned project-specific piping data is available during these activities.
U
se
Creo Schematic P & IDs can be used to export XML files and transfer
the data into 3-D piping designs. This enables designating of equipment,
nozzles, and fittings. In addition, when creating pipelines, routing pipes,
and inserting fittings, automatic selections (based on the XML data) are
made when possible.
al
Fo
r
PT
In
te
rn
Generate the Piping Component File (PCF) information for the Isometric
Drawing Generation (ISOGEN). Creo Parametric piping provides an
ISOGEN interface that enables you to create isometric drawings of
pipelines. The ISOGEN interface exports material and geometrical data
from a Creo Parametric Piping model to a readable ISOGEN.pcf format.
This format serves as an input to ISOGEN for creating pipeline, spool, and
system isometric drawings.
Generate Piping Drawings. You can create Creo Parametric drawings
of piping designs, which can, for example, contain installation and bill of
materials information.
Output File Interchange Format (FIF). You can output information for CNC
bend machines.
Dynamic Design Rule Checking is possible during the pipeline routing
process. Various design errors such as bend violations, missing fittings,
and end type compatibility problems can be highlighted. These errors can
then be corrected before proceeding with the design.
The Schematic Consistency Check report provides information about the
correctness of a 3-D pipe model against the 2-D schematic information
stored in an XML file. You can generate reports for all typical pipeline
configurations in a piping design.
Module 1 | Page 6
2012 PTC
U
se
al
Pipelines
Pipe Segments
Fittings
Fittings
Insert in pipelines
Perform functions
Examples
Reducers/Valves
Equipment
Components with preconfigured
ports
Route to/from ports
Examples
Tanks/Pumps
ISOGEN Drawings
Industry Standard Isometric
Drawing Format
Auto-create from 3-D piping
models
nl
y
PT
In
te
rn
Fo
r
Module 1 | Page 7
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 1 | Page 8
2012 PTC
PT
In
te
rn
al
U
se
nl
y
Fo
r
2012 PTC
Module 1 | Page 9
Piping\Design_Manual
Create pipeline stock.
Task 1:
MAN_DESIGN.ASM
nl
y
Close Window
U
se
te
rn
al
PT
In
Fo
r
Click Save
in the LineStock
dialog box.
Click OK and then click Apply
Changes .
Click Done/Return from the
menu manager.
Module 1 | Page 10
2012 PTC
Task 2:
al
U
se
nl
y
te
rn
Task 3:
In
Fo
r
PT
2012 PTC
Module 1 | Page 11
O
U
se
Fo
r
PT
In
te
rn
al
nl
y
Module 1 | Page 12
2012 PTC
O
U
se
In
te
rn
al
from the
Click Extend
Routing group.
In the Extend dialog box,
select Along Csys Axis from
the drop-down list.
Select Offset from Ref for the
Dimension options.
For the Plane/Csys reference,
select the EXIT_PORT
coordinate system on the
man_design model, as shown.
Select the Y axis radio button.
Click Apply.
Notice that a pipe segment is
created.
Select the X axis radio button.
Click OK.
Notice that another pipe
segment is created, as shown.
nl
y
Fo
r
PT
2012 PTC
Module 1 | Page 13
Fo
r
PT
In
te
rn
al
nl
y
U
se
Task 4:
Module 1 | Page 14
2012 PTC
nl
y
Fo
r
PT
In
te
rn
al
U
se
Task 5:
.
4. Disable Csys Display
Notice that the fitting is
inserted at the end of the pipe
segment, as shown.
2012 PTC
Module 1 | Page 15
al
U
se
nl
y
Click Close
te
rn
In
Fo
r
PT
Module 1 | Page 16
2012 PTC
Task 1:
SPEC_DESIGN.ASM
Piping\Design_Spec
nl
y
Close Window
U
se
PT
In
te
rn
al
Fo
r
2012 PTC
Module 1 | Page 17
Task 2:
U
se
nl
y
Fo
r
PT
In
te
rn
al
This file lists the available pipe and fitting MCAT files and insulation
files. Each file entry associates a piping category and an MCAT file
with a pipe outer diameter file, a pipe thickness file, a combined
size code file, a selection name for a fitting category, and the bolt
nut code associated with the fitting.
Module 1 | Page 18
2012 PTC
nl
y
te
rn
al
U
se
In
This file specifies the elbow fitting name based on rating, size, and
end type. Any blank columns indicate the field is not applicable for
this type of fitting.
Fo
r
PT
2012 PTC
Module 1 | Page 19
Task 3:
1. Click Settings
2. Select the Features check box and click OK in the Model Tree Items
dialog box.
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click No in the Creo Parametric Options message window.
U
se
nl
y
te
rn
al
In
5. Click Piping
from the
Engineering group.
Fo
r
PT
Module 1 | Page 20
2012 PTC
Task 4:
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 1 | Page 21
O
U
se
Fo
r
PT
In
te
rn
al
nl
y
Module 1 | Page 22
2012 PTC
te
rn
al
U
se
nl
y
Fo
r
PT
In
2012 PTC
Module 1 | Page 23
nl
y
The warning in the message area indicates that the pipe segment
size 150A and the entry port size 50A are mismatched. This can be
resolved by inserting a reducer in the pipeline.
Insert reducer fittings in the pipeline using schematic information.
U
se
Task 5:
Fo
r
PT
In
te
rn
al
Module 1 | Page 24
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 1 | Page 25
nl
y
U
se
Task 6:
Fo
r
PT
In
te
rn
al
Module 1 | Page 26
2012 PTC
Task 7:
nl
y
Fo
r
PT
In
te
rn
al
U
se
Notice the invalid corners in the model tree. You can correct this by
inserting corner fittings.
2012 PTC
Module 1 | Page 27
U
se
nl
y
te
rn
al
In
Click Close
PT
.
Click Erase Not Displayed
Click OK to erase all non-displayed objects from memory.
Fo
r
Module 1 | Page 28
2012 PTC
2
nl
y
Module
U
se
Module Overview
te
rn
al
Objectives
Fo
r
PT
In
2012 PTC
Module 2 | Page 1
Considerations
nl
y
Skeletons
Data Sharing Tools
Large Assembly Management
Assembly Structure
Component Interfaces
In
te
rn
al
U
se
Follow the company bill of materials (BOM) and part numbering structure.
Create the assembly structure first.
Benefits
PT
Fo
r
Taking time to consider the assembly structure of piping designs helps ensure
correct piping information is created for downstream activities, such as:
Bill of materials
Fitting reports
Insulation reports
Mass properties
Other important benefits include effective control of external references, and
an appropriate level of detail in designs. Data sharing features such as
shrinkwrap and copy geometry can be used to control references and the
level of detail that should be considered when modeling frequently used
components such as flanges or fittings.
Considerations
The following points should be considered when planning an assembly
structure:
Module 2 | Page 2
2012 PTC
nl
y
Fo
r
PT
In
te
rn
al
U
se
2012 PTC
Module 2 | Page 3
te
rn
al
U
se
nl
y
In
PT
This option is best used when the piping sub-assembly part number is
required in the mechanical sub-assembly BOM.
Fo
r
Module 2 | Page 4
2012 PTC
In
te
rn
al
U
se
nl
y
PT
Fo
r
2012 PTC
Module 2 | Page 5
te
rn
al
U
se
nl
y
In
PT
This option is best used when piping component part numbers are required in
the piping sub-assembly BOM.
Fo
r
Module 2 | Page 6
2012 PTC
Piping\Assembly_Top
Task 1:
ASSY_TOP.ASM
nl
y
te
rn
al
U
se
2. Click Settings
in the model
tree and select Tree Filters.
In
Fo
r
PT
.
Click Working Directory
Select MM_KG_SEC_ASSY.ASM and click Open.
Click OK.
You could have selected any suitable preconfigured piping template
assembly in the previous step.
2012 PTC
Module 2 | Page 7
nl
y
Fo
r
PT
In
te
rn
al
U
se
You can now start creating a piping skeleton and piping features
within the PIPING.ASM.
Module 2 | Page 8
2012 PTC
nl
y
Exclude Components
Substitution
Work Region
Visual States
U
se
Layers
In
te
rn
al
PT
Fo
r
Module 2 | Page 9
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 2 | Page 10
2012 PTC
nl
y
U
se
te
rn
Referenced components
Referenced pipeline routing
al
In
PT
Skeleton models are special parts that serve as the framework for designing
assemblies in a top-down design process. They act as the 3-D layout of
an assembly.
Fo
r
Module 2 | Page 11
Piping\Piping_Skeletons
Task 1:
ASSY_TOP.ASM
nl
y
U
se
te
rn
al
2. Click Settings
in the model
tree and select Tree Filters.
In
PT
Fo
r
.
Click Working Directory
Select MM_KG_SEC_PART.PRT and click Open.
Click OK.
You could have selected any suitable preconfigured piping template
skeleton part in the previous step.
Module 2 | Page 12
2012 PTC
U
se
nl
y
te
rn
al
You can now start creating piping features within the PIPING.ASM.
Fo
r
PT
In
2012 PTC
Module 2 | Page 13
nl
y
U
se
PT
In
te
rn
al
Publish Geometry
Copy Geometry
External Copy Geometry
Shrinkwrap
External Shrinkwrap
Types
Fo
r
There are various data sharing tools that enable selective copying of
non-solid references throughout a design assembly.
Design references such as datum features and surfaces can be transferred
from components and assemblies into skeleton parts.
This enables users to create lightweight references of complex parts and
assemblies relevant to routing pipelines. This also enables users to work
on their individual subsystems without needing access to the top-level
assembly.
By default, all copied references maintain dependency or associativity
with source geometry, enabling automatic updates when design changes
occur. However, data sharing features can be made independent of source
geometry, if required. The associativity can be switched on and off as
desired.
Different types of data sharing features are available:
Publish Geometry Enables you to specify a collection of geometry to be
referenced by other components.
Module 2 | Page 14
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 2 | Page 15
Piping\Piping_Share_Geometry
Task 1:
ASSY_TOP.ASM
nl
y
2. Click Settings
in the model
tree and select Tree Filters.
U
se
te
rn
al
4. Load piping-specific
configuration options.
Click File > Options.
Click Configuration Editor in
the Creo Parametric Options
window.
Select Import configuration
file from the Import/Export
drop-down menu.
Fo
r
PT
In
.
Click Working Directory
Select PIPING_CONFIG.PRO
and click Open.
Click OK in the Creo
Parametric Options dialog
box.
Click NO in the Creo
Parametric Options message
window.
Module 2 | Page 16
2012 PTC
nl
y
O
U
se
te
rn
al
Fo
r
PT
In
2012 PTC
Module 2 | Page 17
Task 2:
O
U
se
al
nl
y
to disable it.
Only
Right-click and select
References.
te
rn
Each copy geometry feature can only contain references from one
model; to copy additional references from other models, you must
create additional copy geometry features.
In
PT
Geometry
from the Get Data
group.
Click Published Geometry
Fo
r
to disable it.
Only
Right-click and select
References.
Zoom in to the assembly
and select PORT2 on the
multi_tank model, as shown.
Press CTRL and select
PORT1 on the multi_tank
model, as shown.
Click Complete Feature
from the Copy Geometry
dashboard.
Module 2 | Page 18
2012 PTC
O
U
se
te
rn
al
nl
y
Fo
r
PT
In
2012 PTC
Module 2 | Page 19
nl
y
U
se
Examples
Piping Equipment
Common Components
PT
In
te
rn
al
Fo
r
Module 2 | Page 20
2012 PTC
Piping\Piping_Comp_Interfaces
Task 1:
TUBE_UNION.PRT
In
te
rn
al
U
se
nl
y
Fo
r
PT
Click Close
from the Quick
Access toolbar.
2012 PTC
Module 2 | Page 21
Task 2:
O
U
se
al
from the
2. Click Assemble
Component group.
Select the TUBE_UNION.PRT
and click Open.
Click Auto Place from the
Component Placement
dashboard.
Select a location near the left
hole, as shown.
Notice that the component
position updates, as shown.
nl
y
1. Click Open
from the Quick
Access toolbar.
Double-click INTERFACES.
ASM to open it.
PT
In
te
rn
Fo
r
Module 2 | Page 22
2012 PTC
3
nl
y
Module
U
se
Module Overview
In
te
rn
al
Objectives
Fo
r
PT
2012 PTC
Module 3 | Page 1
nl
y
Entry Port
Pipe End
Select or Create Point
In
U
se
te
rn
al
PT
Fo
r
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
You can insert fittings or modify pipeline properties during the routing of
pipelines or after routing is completed.
Once the pipeline is finalized, you can easily create a solid part based
on the pipeline routing and the information in the line stock file. The solid
part can be based on a model template, and can be opened on its own
as a model to create further features such as holes or tubing flares.
2012 PTC
Module 3 | Page 3
Configure Parameters
Line Shape
Corner Type
Allowable Values
Design Rule Parameters
User-Defined Parameters
Rectangular Cross-Section
Flexible Hose
U
se
nl
y
Line Stock
te
rn
al
In
PT
Fo
r
A line stock is a set of parameters that describe the material, grade, outside
diameter, and other parameters of pipeline segments.
Once the line stock is created or imported, these parameters are stored
in line stock features in the model.
You can assign different line stocks to different line segments of the
same pipeline because they may have different outside diameters,
materials, and grades.
Line shape is a line stock characteristic that specifies the pipe shape as
straight, flexible, or a combination of both.
Corner type is a line stock characteristic that specifies the type of corner
fittings used in pipelines. These can be bent or mitered, or fitting type
corners.
Fitting type corners create unconnected pipeline segments and are
intended to be locations for placing fittings at a later time.
You can also specify permitted values in the line stock file.
Bend Radius: A list of selectable bend radii.
Bend Angle: A list of selectable bend angles.
Module 3 | Page 4
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
Miter Length: A list of selectable lengths for miter cuts. These values
are used only when the Miter Cut Number is greater than 1.
Miter Cut Number: A list of the permitted quantities of miter cuts. For
example, a setting of 2 forces the pipeline to have two miters as it moves
through a 90 degree corner.
Design rule parameters are used to verify that routed pipelines are within
specified limits. These parameters can also be configured when creating
line stocks.
For example, segment length, bend radius, and bend angle parameters
can be set within limits.
User-defined parameters can be configured for line stock; these can be
system parameters such as fluid_type or user-defined parameters such
as pressure.
Rectangular cross-section line stock can be configured.
This can be used for routing square or rectangular tubing or ductwork.
For flexible hose, you can configure and route pipelines with a minimum
bend radius; this can be changed for different pipe gauges to ensure
accurate representation of flexible hose.
After routing, you can check for bend radius violations using the Design
Rules Check dialog box.
2012 PTC
Module 3 | Page 5
Piping\Non_Spec_Pipelines
Task 1:
ASSY_TOP.ASM
nl
y
4. Click Settings
from the
model tree and select Tree
Filters.
te
rn
al
U
se
3. Click Piping
from the
Engineering group.
PT
In
6. If necessary, expand
PIPING.ASM in the model
tree.
Select PIPING.ASM in the
model tree.
Right-click and select
Activate. Observe the
model tree as shown.
Fo
r
Module 3 | Page 6
2012 PTC
In
Task 2:
te
rn
al
Click Save
in the LineStock
dialog box.
Double-click the piping_data
folder.
Click OK, and then click Apply
Changes .
U
se
nl
y
Fo
r
PT
2012 PTC
Module 3 | Page 7
Fo
r
PT
In
te
rn
al
nl
y
U
se
Task 3:
Module 3 | Page 8
2012 PTC
Routing Pipelines
There are many different routing options available when
manually routing pipelines. These options provide a flexible
approach to pipeline routing.
Routing Tools
nl
y
Extend
To Pnt/Port
Follow
Connect
Branch
Insert Point
In
te
rn
al
U
se
PT
Fo
r
Before routing a pipeline, you must first configure the line stock, and specify
the pipeline start point. You can then use the following tools to route the
pipeline:
Extend enables routing of new piping segments by extending them from
the current position in a specified direction. Extensions can be done by
dragging, typing in an extension distance, or by specifying a reference to
extend to or offset from. Reference options include:
Csys Axis: Extend along a selected coordinate system axis.
Axis/Edge/Segment: Extend parallel to a selected axis, edge, or pipe
segment.
Plane/Point: Extend up to a selected plane or point.
Csys: Dynamically extend pipeline segments relative to a selected
coordinate system. The extension can be measured using cartesian,
cylindrical, or spherical systems.
To Pnt/Port creates a segment from the current start point to the selected
point, port, or pipe end.
To Port is useful when finishing pipelines at ports.
2012 PTC
Module 3 | Page 9
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 3 | Page 10
2012 PTC
Piping\Route_Pipelines
Task 1:
PIPING.ASM
Display types:
nl
y
te
rn
al
U
se
3. Click Piping
from the
Engineering group.
In
from the
Click Set Start
Routing group.
Zoom in and select the PORT1
coordinate system on the
vessel model, as shown.
Fo
r
PT
Notice the small blue circle at the selected start point. This indicates
the current end location of the pipeline being routed. This location
changes as you create pipe segments.
2012 PTC
Module 3 | Page 11
Fo
r
PT
In
te
rn
al
U
se
Click Extend
from the
Routing group.
Drag the extend drag handle
to approximately the location
shown.
If necessary, edit the extend
value to 450 on the model.
Click Apply.
In the Extend dialog box, edit
the Y value to 300 and press
ENTER, as shown.
Click Apply.
Notice that a second pipe
segment is created, as shown.
nl
y
Module 3 | Page 12
2012 PTC
nl
y
Click To Pnt/Port
from the
Routing group.
Select PORT1 on the
multi_tank model, as shown.
in
Click Apply Changes
the To Point/Port dialog box.
Notice that another pipe
segment is created, as shown.
Fo
r
PT
In
te
rn
al
U
se
Observe the bends that are automatically inserted into the pipeline
at each pipe corner. These are created using information contained
within the pipeline stock.
2012 PTC
Module 3 | Page 13
U
se
al
nl
y
te
rn
In
You can route flexible hoses by specifying flexible segments and straight
(fixed length) segments in the same pipeline. This enables you to control the
resulting pipeline shape and design characteristics.
PT
When routing flexible segments, the following routing tools are available:
Fo
r
Module 3 | Page 14
2012 PTC
Piping\Route_Hoses
Task 1:
FLEX_HOSE.ASM
nl
y
Display types:
In
te
rn
al
U
se
3. Click Piping
from the
Engineering group.
Fo
r
PT
from the
Click Set Start
Routing group.
Select the PORT1 coordinate
system on the multi_tank
model, as shown.
2012 PTC
Module 3 | Page 15
O
U
se
te
rn
al
from the
Click To Pnt/Port
Routing group.
Prehighlight the P1 point on
the model and then select it,
as shown.
in
Click Apply Changes
the To Point/Port dialog box.
Notice that a straight pipe
segment is created, as shown.
nl
y
from
Click Environment
the Routing group.
Notice that the line shape is
configured as straight; this
value is taken from the line
stock configuration.
Click OK.
In
PT
from
Click Environment
the Routing group.
Select Flexible with Free
Length for the Line Shape.
Click OK.
Fo
r
from the
Click To Pnt/Port
Routing group.
Prehighlight the P2 point on
the model and then select it,
as shown.
Notice that the Create section
through all points check box
is selected. You create flexible
segments through all points in
this datum point array.
in
Click Apply Changes
the To Point/Port dialog box.
Notice that the flexible pipe
segments are created, as
shown.
Module 3 | Page 16
2012 PTC
Fo
r
PT
In
te
rn
al
from the
Click Regenerate
Quick Access toolbar.
Notice that the pipeline no
longer interferes with the
PILLAR_2.PRT, as shown.
U
se
nl
y
2012 PTC
Module 3 | Page 17
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 3 | Page 18
2012 PTC
4
nl
y
Module
U
se
Module Overview
In
te
rn
al
You can use different methods to modify and move pipelines. You can
add points to pipelines to create pipe segments, then move and rotate the
resulting pipe segments. You can edit existing pipelines using various tools
contained within the Modify Pipeline dialog box, including editing corner
types, and editing line stock. You can edit pipe segment dimensions, and
redefine pipe segments. You can edit the location of routing references in
a piping assembly, such as components. Any routed pipelines in the piping
assembly update to reflect these changes. As you route pipelines, the default
piping environment settings are taken from the current line stock. You can
edit these default values for newly routed pipe segments.
Objectives
Fo
r
PT
2012 PTC
Module 4 | Page 1
nl
y
te
rn
al
U
se
Fo
r
PT
In
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
Connect features are created between the moved segment and the pipeline.
2012 PTC
Module 4 | Page 3
Piping\Moving_Segments
Task 1:
MOVE_SEG.ASM
nl
y
Display types:
3. Click Piping
from the
Engineering group.
, if
al
from
te
rn
U
se
Fo
r
PT
In
Module 4 | Page 4
2012 PTC
Fo
r
PT
In
te
rn
al
nl
y
U
se
Task 2:
2012 PTC
Module 4 | Page 5
O
Figure 1 Modifying Line Stock
PT
In
te
rn
U
se
Piping Environment
al
nl
y
Fo
r
There are a number of ways in which you can modify routed pipelines
including the following:
You can use the Modify Pipeline tool. This provides access to the Modify
Pipeline dialog box, where the following options are available:
Corner Type: You can configure the corner type and value of single or
multiple corners. The corner type can be bend, fitting, or miter. For
bends you can specify the bend radius and for miter corners you can
specify the number of cuts, and if necessary, the cut length.
Line Stock: You can specify the line stock for single or multiple pipe
segments.
Parameters: You can modify pipeline and bend parameters.
Flex Shape: You can modify the line shape of a flexible hose between
fixed and free length.
Flow Direction: You can specify the flow unit and change the flow
direction on a pipeline.
Module 4 | Page 6
2012 PTC
You can edit dimensions created during the routing of a pipeline segment,
for example, pipe segment extend values. Regenerating the piping
assembly updates the pipeline geometry.
You can redefine a pipeline segment. This enables you to completely
change the routing references and options.
When redefining pipe segments, all subsequent pipe segments
are temporarily suppressed from the model. They are resumed
when the redefining operation is complete.
nl
y
You can edit the location and geometry of any routing references, for
example, you can change the location of components referenced during
routing. Regenerating the piping assembly updates the pipeline geometry
accordingly.
Piping Environment
U
se
When you start routing a pipeline, the default piping environment settings are
taken from the line stock you are using and remain the same unless you
change them. You can change the default settings in the Piping Environment
dialog box. The following items can be edited:
In
te
rn
al
Fo
r
PT
Any settings changed in the piping environment are only used for
newly routed pipe segments.
2012 PTC
Module 4 | Page 7
Piping\Modifying_Routing
Task 1:
MOD_ROUTE.ASM
nl
y
3. Click Piping
from the
Engineering group.
te
rn
al
Pipes
from the View group to
display thick pipelines.
U
se
4. Click Pipe
group.
In
Fo
r
PT
.
Click Apply Changes
Notice that the line stock
thickness updates on the
pipeline, as shown.
Module 4 | Page 8
2012 PTC
nl
y
te
rn
al
U
se
.
Click Apply Changes
Notice that the corner
geometry updates, as shown.
In
Fo
r
PT
.
Click Apply Changes
Notice that the corner
geometry updates, as shown.
2012 PTC
Module 4 | Page 9
PT
In
te
rn
al
U
se
nl
y
Fo
r
Module 4 | Page 10
2012 PTC
5
nl
y
Module
U
se
Module Overview
te
rn
al
In
Objectives
Fo
r
PT
2012 PTC
Module 5 | Page 1
Understanding Fittings
Fittings are parts or assemblies that can be inserted into
pipelines to perform specific design functions, for example,
reducer fittings and valve fittings.
al
U
se
te
rn
Corner
Elbows
Reducers
Angle Valves
End
Caps
Plugs
Flanges
Straight (Internal)
Tees/Valves
Fitting Options
Straight Break
Straight Continuous
nl
y
Fitting Types
Fo
r
PT
In
Understanding Fittings
You can create fittings as part or assembly models. You can store fittings
in libraries, enabling you to easily retrieve the correct fitting size when you
need to insert them into a pipeline.
Fittings can be divided into three broad categories:
Corner fittings such as elbows, reducers, and angle valves.
You can locate Corner fittings quickly by selecting a pipeline corner.
Creo Parametric uses the intersection of the Z-axes of the coordinate
systems in the fittings to locate the fitting.
You can create Corner fittings in a variety of angles; they do not need to
be 90 degrees.
End fittings such as caps, plugs, and flanges.
Module 5 | Page 2
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 5 | Page 3
Creating Fittings
You can add break points to divide up pipe segments, then move
and rotate the resulting pipe segments.
Fitting Model Requirements
nl
y
Parts or Assemblies
Entry Ports
Coordinate Systems
Z-axis Orientation
Datum Point
Aligns Fitting
Center of Fitting
Penetration Distance
Termination of pipelines
Controlled by entry port location
al
Fitting Libraries
U
se
te
rn
Family Tables
PT
In
Fo
r
Module 5 | Page 4
2012 PTC
The alignment point is normally located along the Z-axis at the center of
symmetry of the fitting. For fittings with three entry ports (for example,
tee fitting), the alignment point is at the intersection of the three Z-axes.
Penetration Distance
Pipelines associated with a fitting terminate at the fittings coordinate
system entry ports. You can control the penetration distance in a fitting by
modifying the location of entry port coordinate systems. Regenerating
fitting models updates any routed pipelines and solid pipes.
nl
y
Fitting Libraries
Fo
r
PT
In
te
rn
al
U
se
Fitting libraries can be configured using family tables. This saves time
when creating large numbers of fittings with only minor size variations. It
also enables easy selection and placement of fittings.
2012 PTC
Module 5 | Page 5
Piping\Creating_Fittings
Task 1:
TEE_STRAIGHT.PRT
nl
y
Display types:
al
Fo
r
PT
In
te
rn
System
from the Datum
group.
Press CTRL and Prehighlight
and select the FRONT datum
plane on the model; then
Prehighlight and select the
RIGHT datum plane on the
model.
Press CTRL and select the
flat surface on the model, as
shown.
Notice the location of the
coordinate system and the
direction of the axes, as
shown. Click OK.
Notice a coordinate system
feature is created, as shown.
U
se
Module 5 | Page 6
2012 PTC
Task 2:
te
rn
al
nl
y
U
se
PT
In
When inserting fittings into pipelines, the datum point is used for
aligning the fitting with the centerline of the connecting pipeline.
For fittings with three entry ports (for example, a tee fitting), the
alignment point is at the intersection of the three Z-axes.
Fo
r
2012 PTC
Module 5 | Page 7
Inserting Fittings
You can insert fittings into pipelines using different location
options depending on your requirements.
Fitting Location Options
nl
y
End
Corner
Straight Segment
Straight Break
Straight Continuous
Orientation Options
Flip
Twist
te
rn
al
U
se
In
PT
Fo
r
Orientation Options
You can control the fitting orientation when inserting a fitting, and also by
using the Redefine option after the fitting is placed. There are two options to
control the fitting orientation:
Flip Turns the fitting so that entry ports face in the opposite direction.
Twist Twists the fitting by rotating or aligning entry port axes.
Module 5 | Page 8
2012 PTC
Piping\Inserting_Fittings
Task 1:
INSERT_FITT.ASM
Fo
r
PT
In
te
rn
al
U
se
3. Click Piping
nl
y
2012 PTC
Module 5 | Page 9
Task 2:
nl
y
U
se
te
rn
al
In
PT
Fo
r
Module 5 | Page 10
2012 PTC
6
O
nl
y
Module
U
se
Module Overview
te
rn
al
You can create pipe solid model parts based on routed pipeline segments.
Pipe geometry is automatically trimmed to accommodate holes for branches
and any inserted fittings. You can also create a single solid model part of a
pipeline. This process is known as extracting a pipe model. The extracted
pipe model can be created using previously created pipe solid models, any
fittings inserted in the pipeline, and any assembly components within the
pipeline.
Objectives
Fo
r
PT
In
2012 PTC
Module 6 | Page 1
nl
y
U
se
Figure 1 Pipe Solid
Dialog Box
Fo
r
PT
In
te
rn
al
Uses
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 6 | Page 3
Piping\Solid_Pipes
Task 1:
PIPE_SOLID.ASM
Fo
r
PT
In
te
rn
al
U
se
3. Click Piping
nl
y
2012 PTC
U
se
nl
y
al
te
rn
Fo
r
PT
In
2012 PTC
Module 6 | Page 5
Extracting Models
You can extract a single solid model part of a pipeline using
selected pipe solids, inserted fittings, and any assembly
components within a piping assembly.
O
U
se
nl
y
Extracting Models
Figure 2 Extracted
Model Example
Fo
r
PT
In
te
rn
al
Extracting Models
The following features describe extracted part models in piping:
Extracting a model enables you to create a single part model from a
continuous series of pipe solids, fittings, and, if required, assembled
components contained within a pipeline.
Extracting a model involves merging by reference the selected parts into
the extracted part model. Therefore, if the piping assembly changes, the
extracted part model also updates.
The extracted part model is contained within the piping assembly. It can be
hidden from view, if desired.
The part model is also stored as an independent model, so it can be
retrieved and viewed on its own without retrieving the entire piping
assembly.
You can also use it to create views in drawings.
Module 6 | Page 6
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 6 | Page 7
Piping\Extract_Pipe_Models
Task 1:
EXTRACT.ASM
4. Click Settings
nl
y
Fo
r
PT
In
te
rn
al
U
se
5. In the Model Tree Items dialog box, select the Features check box
under Display and click OK.
Module 6 | Page 8
2012 PTC
nl
y
O
PT
In
te
rn
al
U
se
Fo
r
2012 PTC
Module 6 | Page 9
to disable it.
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 6 | Page 10
2012 PTC
7
O
nl
y
Module
U
se
Module Overview
te
rn
al
You can create many different types of piping reports, enabling you to
obtain information about pipelines, pipe line stock, and pipe fittings. This
includes reports on pipe segments, bend location information, bend machine
information, and bill of materials information. Different types of reports can
be generated for both manually routed pipelines and specification-driven
pipelines.
Objectives
Fo
r
PT
In
2012 PTC
Module 7 | Page 1
Segment
Pipeline
Fitting
Insulation
Bill of Materials
File Interchange Format (FIF)
Designatable
Bend Machine
Bend Location
Holes Report
Clocking Angle
nl
y
General
Length
Bill of Materials
Bend Location
Bend Machine
Holes Report
Clocking Angle
File Interchange Format (FIF)
Check Pipe
Show Report Setup
Insulation Location
In
te
rn
al
Specification-Driven Pipelines:
Reporting Tools
U
se
PT
Fo
r
The Report Pipeline dialog box enables reporting about pipelines, fittings, and
bends. Different options are available depending on which type of pipeline
is selected. For example, a non-specification-driven (or manually routed)
pipeline, or a specification-driven pipeline.
The following reports can be created for manually routed pipelines:
General Displays general information for a pipe segment or pipeline,
including pipeline name, line stock name, material, and pipe diameter.
Length Displays lengths of pipelines, pipe segments, and line stock used
in a pipeline.
Bill of Materials Provides bill of materials information, including details of
quantity, pipeline name, pipeline segment name, line stock, and segment
length.
Bend Location Provides bend location information, including details of
bend number, offset in X, Y, and Z, bend angle, and bend radius.
Bend Machine Provides bend machine information, including details of
bend number, offset, twist angle, bend angle, and bend radius.
Module 7 | Page 2
2012 PTC
nl
y
Holes Report Provides information about holes for the selected segment,
including intersecting branch sections and hole and cut features in the
selected segment.
Clocking Angle Calculates the clocking angle between two coordinate
systems on a flexible pipe segment.
File Interchange Format (FIF) Provides information for computer
numerical control (CNC) bend machines.
Check Pipe Checks a pipeline for line stock parameter violations. Any
violations are highlighted on the pipeline.
Show Report Setup Views reports previously set up for bend machine,
bend location, or clocking angle information.
Insulation Location Displays information about insulation within a pipe
segment.
Fo
r
PT
In
te
rn
al
U
se
2012 PTC
Module 7 | Page 3
Piping\Pipe_Report_Tools
Task 1:
MAN_PIPELINE.ASM
3. Click Piping
U
se
al
In
te
rn
nl
y
Fo
r
PT
.
box, click Piping Info
Notice that the same results
are now displayed in a
separate information window.
Click Close from the
Information Window.
Module 7 | Page 4
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 7 | Page 5
nl
y
Fo
r
PT
In
te
rn
al
U
se
Module 7 | Page 6
2012 PTC
8
O
nl
y
Module
U
se
Module Overview
te
rn
al
Objectives
Fo
r
PT
In
2012 PTC
Module 8 | Page 1
nl
y
U
se
al
In
te
rn
PT
Piping Drawings
You can create piping drawings, which display different views of piping
models.
Fo
r
2012 PTC
Installation Drawings
You can create installation drawings that display different views of piping
designs with dimensions and piping annotations.
Fo
r
PT
In
te
rn
al
U
se
nl
y
All hidden lines are removed from these drawings and they are used to
assist in the piping installation process.
Pipe segments can be displayed using single line or double line
representation.
You can insert a pipe symbol on pipe segments to display the slope of
the pipe.
2012 PTC
Module 8 | Page 3
Piping\Piping_Drawings
Task 1:
PIPE_DRAW.DRW
O
U
se
PT
In
te
rn
al
nl
y
Fo
r
Module 8 | Page 4
2012 PTC
Task 2:
O
U
se
al
nl
y
from the
2. Click Piping
Applications group.
In
te
rn
For specification-driven pipelines you can also use the Double Line
Above option. This enables you to specify a line stock size above
which double lines are shown, and below which single lines are
shown.
Fo
r
PT
2012 PTC
Module 8 | Page 5
O
U
se
Fo
r
PT
In
te
rn
al
nl
y
Module 8 | Page 6
2012 PTC
nl
y
Pipe Line
asm.mbr.pipe.line...
te
rn
al
U
se
Pipe Segment
asm.mbr.pipe.segment...
In
PT
There are a number of specific parameters relating to piping systems that can
be divided into the following categories:
Fo
r
Line Stock These parameters display information about line stock used
in piping assemblies. For example, you can list the materials used for
all line stock in a piping assembly.
These Report parameters begin with asm.mbr.pipe.stock.
Pipe Line These parameters display information about pipelines in piping
assemblies. For example, you can list the names of all the pipelines in a
piping assembly.
These Report parameters begin with asm.mbr.pipe.line.
Pipe Segment These parameters display information about pipeline
segments in piping assemblies. For example, you can list the pre-cut
length for pipeline segments used in a piping assembly.
These Report parameters begin with asm.mbr.pipe.segment.
Pipe Line Segment Bend These parameters display information about
bends in pipe line segments. For example, you can list the bend machine
radius for bends in a pipeline.
2012 PTC
Module 8 | Page 7
Fo
r
PT
In
te
rn
al
U
se
nl
y
Standard bill of materials parameters can also be used. For example, piping
assembly member names and quantities can be listed in tables. You can also
display BOM balloons on piping assembly drawing views.
Module 8 | Page 8
2012 PTC
Piping\Piping_Report_Parameters
Task 1:
PIPE_PARAM.ASM
In
te
rn
al
U
se
3. Click Piping
nl
y
Fo
r
PT
5. Click Close
in the Report
Pipeline dialog box.
6. Disable Csys Display
2012 PTC
Module 8 | Page 9
Task 2:
nl
y
te
rn
al
U
se
Fo
r
PT
In
4. Repeat the previous step for the following cells in the table.
Below Cell
OFFSET
asm > mbr > pipe > segment > csys >
bend > mach_offset
TWIST ANG
asm > mbr > pipe > segment > csys >
bend > mach_twist
BEND ANG
asm > mbr > pipe > segment > csys >
bend > mach_bend
BEND RAD
asm > mbr > pipe > segment > csys >
bend > mach_radius
Module 8 | Page 10
2012 PTC
U
se
nl
y
al
Fo
r
PT
In
te
rn
2012 PTC
Module 8 | Page 11
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 8 | Page 12
2012 PTC
9
nl
y
Module
U
se
Module Overview
te
rn
al
Specification driven piping systems are based on the piping design method
used when designing industrial piping systems. Specification driven piping
systems use piping specification databases to determine which pipelines
can be routed and which fittings can be inserted when designing pipelines.
These databases are made up of master catalog (MCAT) files that store
all piping and fitting design data, fitting libraries consisting of parts and
assemblies representing fittings, and project specific data files which store
design information for a specific piping design project. In this module you
learn about the different types of MCAT files relating to piping.
In
Objectives
Fo
r
PT
2012 PTC
Module 9 | Page 1
nl
y
Fitting Libraries
U
se
Parts and
Assemblies
Project-Specific
Data Files
te
rn
al
Auto-Selection
Files
Specification
Directory Files
In
PT
Fo
r
Master Catalog (MCAT) files are ASCII text files that store all pipe and
fitting design data. The design data is available for all projects and remains
unchanged as new piping projects are created. The MCAT file data sources
consist of manufacturers catalogs and industry standards and practices.
The MCAT files can be broken down into three broad areas consisting of
files relating to pipe data, files relating to fitting data, and general files
relating to both pipes and fitting data.
Fitting Libraries consist of Creo Parametric parts and assemblies, which
provide the physical representation of fittings in a pipeline.
Project specific data files are ASCII text files that store information for a
specific piping design project. They are a subset of the information stored
in the MCAT files and consist of two files:
Auto-selection files contain data on pipes, fittings, bends, miters, and
assembly fittings selected for a specific piping project. This data is
retrieved from the MCAT files.
Specification directory files contain piping specifications, mnemonics,
colors, layers, insulation codes, and assigned auto-selection files in a
specific piping project.
Module 9 | Page 2
2012 PTC
In
te
rn
al
U
se
nl
y
PT
Fo
r
A similar directory and file structure is provided below the Creo Parametric
loadpoint in the \text\piping_data\master_catalog folder. The master_catalog
folder contains the following files at the top level:
piping_mcat_dir.ptd
piping_manufacture_dir.ptd
piping_material.ptd
The following sub-folders containing relevant files are created below the
master_catalog folder:
Pipe
Pipeod
Pipethk
Bend
Bend_Machine
All folders and files can be pointed to using specific config.pro file options.
2012 PTC
Module 9 | Page 3
PT
In
te
rn
al
U
se
nl
y
Fo
r
2012 PTC
Insulation
Bolt nut
Fo
r
PT
In
te
rn
al
U
se
nl
y
All folders and files can be pointed to using specific config.pro file options.
2012 PTC
Module 9 | Page 5
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 9 | Page 6
2012 PTC
10
nl
y
Module
U
se
Module Overview
al
The master catalog files relating to pipes can be broken into two groups,
those relating to pipe design and those relating to pipe manufacture. In this
module you learn about the different types of MCAT files relating to piping.
You also learn how to configure piping MCAT files.
te
rn
Objectives
Fo
r
PT
In
2012 PTC
Module 10 | Page 1
nl
y
Each entry associates piping categories and master catalog files with other
piping data files.
U
se
al
The Piping Master Catalog Directory file (piping_mcat_dir.ptd) lists all the
available Pipe and Fitting MCAT files and insulation files. Each file entry
associates a piping category and a Master Catalog file with a Pipe Outer
Diameter file, a Pipe Thickness file, a Combined Size Code file, a selection
name for a fitting category, and the bolt nut code associated with the fitting.
te
rn
The Piping Master Catalog Directory file uses this information to do the
following:
Fo
r
PT
In
Retrieve Pipe Outer Diameter and Pipe Thickness file data. This data is
based on the associated pipe or fitting MCAT file.
Retrieve fitting selection names based on fitting categories and fitting
MCAT file while creating the auto-selection file.
Retrieve size codes for pipes and fittings.
Retrieve the bolt and nut code associated with a fitting. The code provides
information about the type, quantity, associated Bolt Nut MCAT file, and
MCCS code.
Module 10 | Page 2
2012 PTC
Piping\Piping_Catalog_Directory
Task 1:
NO FILE OPEN
nl
y
U
se
Fo
r
PT
In
te
rn
al
2012 PTC
Module 10 | Page 3
U
se
nl
y
te
rn
al
This file lists the available pipe and fitting MCAT files and insulation
files. Each file entry associates a piping category and a master
catalog file with a pipe outer diameter file, a pipe thickness file, a
combined size code file, a selection name for a fitting category, and
the bolt nut code associated with the fitting.
6. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
In
7. In the system window, type exit and press ENTER to close the
window.
Fo
r
PT
Module 10 | Page 4
2012 PTC
te
rn
al
U
se
nl
y
In
Fo
r
PT
Module 10 | Page 5
Piping\Pipe_Design_Catalog
Task 1:
NO FILE OPEN
PT
In
te
rn
al
U
se
nl
y
Fo
r
This file configures available pipe sizes, schedules, and end types
for each pipe material type. Pipe end types are retrieved based on
the selected pipe size and schedule.
4. In the system window, type exit and press ENTER to close the
window.
Task 2:
Module 10 | Page 6
2012 PTC
In
te
rn
al
U
se
nl
y
PT
The file is used to retrieve the pipe outside diameter and pipe
size code based on the pipe size for specification-driven pipeline
creation.
Fo
r
3. In the system window, type exit and press ENTER to close the
window.
Task 3:
2012 PTC
Module 10 | Page 7
te
rn
al
U
se
nl
y
In
This file is used to retrieve the pipe thickness based on the pipe
size and schedule for specification-driven pipeline creation.
3. In the system window, type exit and press ENTER to close the
window.
Fo
r
PT
Module 10 | Page 8
2012 PTC
nl
y
U
se
te
rn
al
Fo
r
PT
In
The Pipe Manufacture Directory file is used to retrieve names of the Bend
file, Bend Machine file, Bending Spring Back and Elongation file, and Miter
file. This data is based on pipe material code.
2012 PTC
Module 10 | Page 9
Piping\Pipe_Manufacture_Directory
Task 1:
NO FILE OPEN
U
se
nl
y
In
te
rn
al
Fo
r
PT
Module 10 | Page 10
2012 PTC
nl
y
U
se
te
rn
al
Fo
r
PT
In
2012 PTC
Module 10 | Page 11
Piping\Pipe_Manufacture_Catalog
Task 1:
NO FILE OPEN
nl
y
U
se
Fo
r
PT
In
te
rn
al
This file specifies the bend information for pipe sizes that are
assigned to specific pipe material codes.
4. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
In the system window, type exit and press ENTER to close the
window.
Module 10 | Page 12
2012 PTC
Task 2:
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 10 | Page 13
Fo
r
PT
In
te
rn
al
U
se
nl
y
This file is used to retrieve the miter radius, the minimum and
maximum miter angles, and the number of cuts.
3. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
4. In the system window, type exit and press ENTER to close the
window.
This completes the procedure.
Module 10 | Page 14
2012 PTC
U
se
te
rn
al
nl
y
In
Fo
r
PT
2012 PTC
Module 10 | Page 15
In the lower figure, two bend creation examples are shown: one bend
and more than one bend.
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 10 | Page 16
2012 PTC
Piping\Bend_Machine_Catalog
Task 1:
NO FILE OPEN
U
se
nl
y
te
rn
al
Fo
r
PT
In
This file is used to store the spring back and elongation for a given
pipe material. The amount of spring back and elongation are
determined based on the pipe size, bend radius, and bend angle.
2012 PTC
Module 10 | Page 17
Fo
r
PT
In
te
rn
al
U
se
nl
y
This file is used to retrieve the start, middle, and end clamp lengths.
This data is based on pipe size and is used during bend creation
and design rule checking.
2. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
In the system window, type exit and press ENTER to close the
window.
This completes the procedure.
Module 10 | Page 18
2012 PTC
11
nl
y
Module
U
se
te
rn
al
Master catalog fitting files specify the fittings available for insertion into
specification-driven pipelines. There is normally one file for each specific
type of fitting, for example, reducing tee and straight tee fittings. The data
contained within fitting files maps to parameter values within fitting models;
this ensures proper insertion of fittings. In this module, you learn about
the different types of MCAT files relating to fittings. You also learn how to
configure MCAT fitting files, and fitting library models.
In
Objectives
Fo
r
PT
2012 PTC
Module 11 | Page 1
nl
y
U
se
al
te
rn
In
Fitting Master Catalog files specify the model fitting names in the fitting
library; this is based on fitting rating, fitting size, branch size, new size, and
inlet and outlet end types. There is one file per fitting type, for example,
elbow_90_bw_steel.ptd and tee_reducing_bw_steel.ptd.
PT
Fitting master catalog files are referenced in the piping MCAT directory file,
where the folder and filename are specified. The following is a list of field
names with descriptions:
Fo
r
Module 11 | Page 2
2012 PTC
Piping\Fitting_Catalog
Task 1:
NO FILE OPEN
O
U
se
al
nl
y
te
rn
This folder contains all the available fitting master catalog files.
There is one file for each type of fitting.
In
3. Click the Utilities group drop-down menu and select Open System
Window.
Fo
r
PT
This file specifies the model fitting names in the fitting library; this
is based on fitting rating, fitting size, branch size, new size, and
inlet and outlet end types.
5. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
Leave the system window open for now.
2012 PTC
Module 11 | Page 3
Task 2:
nl
y
U
se
Any blank columns indicate that the field is not applicable for this
type of fitting.
Fo
r
PT
In
te
rn
al
Module 11 | Page 4
2012 PTC
nl
y
te
rn
al
U
se
In
PT
The fitting master catalog files determine the selection options available when
inserting fittings. For example, specifying the size of a tee-reducer to be 50A
determines the selection options for the branch size (bsize).
Fo
r
2012 PTC
Module 11 | Page 5
nl
y
Model Parameters
Feature Parameters
In
te
rn
al
U
se
PT
Fitting Libraries
Fo
r
Fitting Models
When creating fitting libraries, it should be noted that fitting models require
the following parameters to enable correct mapping of information:
Model Parameter: Fitting_Code
Feature Parameters:
In coordinate system Port0: Size
In coordinate system Port0: End_Type
In coordinate system Port1: Size
In coordinate system Port1: End_Type
In coordinate system Port1: New_Size
Module 11 | Page 6
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
Not all feature parameters are required; this depends on the port
configuration of the fitting. For example, reducers do not have a
port2 coordinate system.
2012 PTC
Module 11 | Page 7
nl
y
In
te
rn
al
U
se
PT
Fo
r
2012 PTC
Note that default coordinate systems should be removed from fitting models
to avoid incorrect positioning of models in pipelines.
For in-line fittings, if there are two or more ports, the Z-axes of two of the
ports must be collinear with the fitting local coordinate system Z-axis.
For in-line eccentric fittings, if there are two or more ports, they must be
parallel to the local coordinate system Z-axis. The inlet port should be located
on the local coordinate system Z-axis, and the outlet port should be offset
along the local coordinate system Y-axis with its Z-axis parallel to the local
coordinate system Z-axis.
nl
y
For corner fittings, if there are two or more ports, you must include an angle
equal to the vertex angle where the fitting is inserted. The inlet port should
be located on the local coordinate system Z-axis.
For lateral fittings, the Y-axis of the inlet port and the Z-axis of the lateral
outlet port must include an angle equal to the lateral angle of the fitting.
al
U
se
te
rn
When creating fitting models using family tables, as shown in Figure 4, the
following guidelines should be used:
Fo
r
PT
In
2012 PTC
Module 11 | Page 9
Piping\Fittings_Configuring
Task 1:
NO FILE OPEN
nl
y
Fo
r
PT
In
te
rn
from the
5. Click Parameters
Model Intent group.
In the Parameters dialog box,
select Feature from the Look
In drop-down list.
Select the coordinate system
PORT0 on the model, as
shown.
U
se
al
3. Double-click the
ELBOW_90_STEEL_BW.PRT
from the browser to open the
model.
Module 11 | Page 10
2012 PTC
U
se
nl
y
te
rn
al
In
Fo
r
PT
2012 PTC
Module 11 | Page 11
U
se
nl
y
Fo
r
PT
In
te
rn
al
Module 11 | Page 12
2012 PTC
U
se
nl
y
te
rn
al
In
Fo
r
PT
This file specifies a unique material classification code (MCCS) for the
corresponding bolt nut code. The MCCS is unique for different pipe sizes and
for different pressure ratings of a fitting. This code is subsequently used
to obtain information about the bolt nut material from the Bolt Nut Master
Catalog file.
The Bolt Nut Selection file also provides information about the number of bolt
nuts required for the main fitting and for the flanges mated to that main fitting.
2012 PTC
Module 11 | Page 13
Piping\Bolt_Nut_Catalog
Task 1:
NO FILE OPEN
nl
y
U
se
3. Click the Utilities group drop-down menu and select Open System
Window.
PT
In
te
rn
al
Fo
r
Module 11 | Page 14
2012 PTC
Task 2:
In
te
rn
al
U
se
nl
y
This file specifies material description and bulk item names based
on unique MCCS.
Fo
r
PT
2012 PTC
Module 11 | Page 15
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 11 | Page 16
2012 PTC
12
O
nl
y
Module
U
se
Module Overview
te
rn
al
Some master catalog files provide information that relates to both pipes and
fittings. This includes the piping material file, which specifies pipe and fitting
material information. In addition, the end compatibility file specifies all the
compatible pipe and fitting end types. In this module, you learn about the
different types of MCAT files that relate to both pipes and fittings. You also
learn how to configure these files.
Objectives
Fo
r
PT
In
2012 PTC
Module 12 | Page 1
nl
y
te
rn
al
U
se
In
PT
The piping material file (piping_material.ptd) relates to both piping data and
fitting data.
Fo
r
Module 12 | Page 2
2012 PTC
Piping\Piping_Material
Task 1:
NO FILE OPEN
nl
y
Fo
r
PT
In
te
rn
al
U
se
3. In the ribbon, click the Utilities group drop-down menu and select
Open System Window.
2012 PTC
Module 12 | Page 3
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 12 | Page 4
2012 PTC
U
se
nl
y
te
rn
al
Fo
r
PT
In
2012 PTC
Module 12 | Page 5
Piping\End_Compatibility
Task 1:
NO FILE OPEN
nl
y
U
se
3. In the ribbon, click the Utilities group drop-down menu and select
Open System Window.
Fo
r
PT
In
te
rn
al
This file specifies all the compatible pipe and fitting end types. The
file determines whether two ends are compatible and can be mated.
End type compatibility is based on end types and fitting ratings.
5. In the Pro/TABLE window, click File > Exit.
The edited file is automatically saved.
In the system window, type exit and press ENTER to close the
window.
This completes the procedure.
Module 12 | Page 6
2012 PTC
Insulation Files
The Insulation files specify insulation data for pipes and fittings.
These files are used in insulation modeling and reporting.
U
se
nl
y
Insulation Files
Fo
r
PT
In
te
rn
al
The Insulation files (for example, general.ptd) specify insulation data for pipes
and fittings. The insulation material code and material thickness are retrieved
from the insulation file and used in insulation modeling and reporting.
2012 PTC
Module 12 | Page 7
Piping\Insulation
Task 1:
NO FILE OPEN
nl
y
3. In the ribbon, click the Utilities group drop-down menu and select
Open System Window.
PT
In
te
rn
al
U
se
Fo
r
Module 12 | Page 8
2012 PTC
al
U
se
nl
y
te
rn
In
You can use the combined size code to specify the stock number format for
pipes and fittings that represent all combinations of sizes.
Fo
r
PT
The pipes and fittings in the first row of the table shown have only one size.
Therefore, no values are specified for NSIZE and BSIZE.
A reducer fitting having main size 100A and new size 50A can be
represented by a combined size code 050. This combined size code
represents the size combination 100A x 50A. Because the combined size
code such as 050 is user-defined, it may not have any visual relation to
the actual fitting size combination.
2012 PTC
Module 12 | Page 9
Piping\Combined_Size_Code
Task 1:
NO FILE OPEN
nl
y
U
se
3. In the ribbon, click the Utilities group drop-down menu and select
Open System Window.
Fo
r
PT
In
te
rn
al
This file specifies combined size codes for pipes and fittings of
various combinations of sizes. You can use the combined size
code to specify the stock number format for pipes and fittings that
represent all combinations of sizes.
Module 12 | Page 10
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 12 | Page 11
te
rn
al
U
se
nl
y
In
Fo
r
PT
Module 12 | Page 12
2012 PTC
Piping\Unit_System
Task 1:
NO FILE OPEN
nl
y
Fo
r
PT
In
te
rn
al
U
se
3. In the ribbon, click the Utilities group drop-down menu and select
Open System Window.
2012 PTC
Module 12 | Page 13
PT
In
te
rn
al
U
se
nl
y
Fo
r
This file specifies the units system that can be used for the various
parameter values in the piping data files.
Module 12 | Page 14
2012 PTC
13
nl
y
Module
U
se
Module Overview
Objectives
In
te
rn
al
Project-specific data files store specific project information and are created
when setting up new piping projects. These files include specification
directory files, which store piping specifications and assigned auto-selection
files for a piping project. Auto-selection files contain information on pipes and
fittings for a piping project, and are a subset of the information stored in MCAT
files. Other project-specific files include insulation directory files containing
information on insulation files and codes, and fitting category map files that
assign fitting categories to dialog box buttons used when inserting fittings. In
this module, you learn about the different types of project-specific data files.
You learn how to configure auto-selection files and specification directory
files. You also learn about the many config.pro options relating to piping.
Fo
r
PT
2012 PTC
Module 13 | Page 1
nl
y
te
rn
al
U
se
PT
In
Fo
r
2012 PTC
system to the correct auto-selection file. For example, you can assign
the auto-selection file created for specification 11C (11c_asfile.ptd) to the
specification 11C record in a specification directory file.
When creating pipelines or inserting fittings, the system retrieves the
specification data from the specification directory file. The specification
directory file directs the system to the appropriate auto-selection file to
retrieve the pipe, fitting, and assembly fitting data.
The system retrieves the auto-selection piping data from the pipe, fitting,
and assembly fitting records defined for each specification. This data then
populates appropriate dialog boxes when routing pipelines or inserting fittings.
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 13 | Page 3
Piping\Auto_Selection
Task 1:
PIPING.ASM
U
se
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click No in the Creo Parametric Options message window.
al
nl
y
4. Click Piping
te
rn
In
Fo
r
PT
Module 13 | Page 4
2012 PTC
nl
y
In
te
rn
al
U
se
PT
9. Click Sizes
.
Notice that the Pipe Size dialog box lists the available pipe sizes
from the PIPE_STEEL.PTD file.
from the Pipe Size table to maintain all available
Click Accept
pipe sizes.
Fo
r
2012 PTC
Module 13 | Page 5
Click Save
nl
y
12. Select the Allow Bend and Allow Miter check boxes.
Fo
r
PT
In
te
rn
al
U
se
Module 13 | Page 6
2012 PTC
nl
y
Specification
Mnemonic
Color
Layer
Auto-Selection File
Insulation Code
U
se
In
te
rn
al
PT
Fo
r
Module 13 | Page 7
Piping\Specification_Directory
Task 1:
PIPING.ASM
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click NO in the Creo Parametric Options message window.
U
se
nl
y
al
3. Click Piping
te
rn
In
4. Click Spec DB
PT
Fo
r
Module 13 | Page 8
2012 PTC
8. Click Save
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 13 | Page 9
nl
y
Insulation Codes
Insulation MCAT Filenames
Insulation Colors
U
se
Insulation Modeling
Insulation Reporting
al
te
rn
In
Fo
r
PT
2012 PTC
nl
y
Icon Number
Icon Bitmap File Name
Fitting Category
Valve Number
In
te
rn
al
U
se
PT
Fo
r
The fitting category map file maps each fitting category to a fitting category
icon file. Mapping the icon file enables you to select a fitting category (icon)
button when inserting fittings; this retrieves a list of fittings for the selected
category and specification. There are by default seven fitting category icons.
However, you can create as many fitting category icons as required.
The fitting category map file contains the following data fields:
Icon Number: Orders the fitting category (icon) buttons under Fitting
Selection in the Insert Fitting and Insert Group Fitting dialog boxes. The
order begins from left to right beginning with the number one.
Icon Bitmap File Name: Specifies the icon graphics file.
Fitting Category: Specifies the auto-selection file to retrieve fitting selection
names.
Valve Number: Specifies if a valve number is required for fittings.
You can assign and reassign fitting categories to icons at any time by
mapping each fitting category to an icon bitmap file and assigning an order
2012 PTC
Module 13 | Page 11
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 13 | Page 12
2012 PTC
Design Mode
Pipeline Environment
File Name and Directory Locations
ISOGEN Interface
te
rn
al
U
se
nl
y
The config.pro options related to piping can be divided into the following
areas:
In
PT
There are many config.pro options related to piping. These can be divided
into the following broad areas:
Fo
r
2012 PTC
Module 13 | Page 13
Piping\Piping_Configs
Task 1:
NO FILE OPEN.
nl
y
In
te
rn
al
U
se
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click Add, then type the first option listed in the table and press
ENTER.
Add and/or verify the remaining options and corresponding values
as shown.
PT
As you type each option, the option name is completed for you. In
addition, certain options have a set of values to select from. For the
purposes of simplifying this exercise, all directory paths are given
as relative to the current directory. It is recommended that absolute
paths be used in a work situation.
Fo
r
Module 13 | Page 14
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 13 | Page 15
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 13 | Page 16
2012 PTC
14
nl
y
Module
U
se
PT
In
te
rn
al
Objectives
Fo
r
2012 PTC
Module 14 | Page 1
nl
y
U
se
In
te
rn
Connection Port
Feature Level Parameters
Size/End_Type/Rating
al
Equipment Nozzles
PT
Fo
r
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
Size: A string parameter that stores the nozzle size, which is used to set up
the default pipe size when a pipe routing starts from the port. It is also used
for the size match checking between a nozzle and its connected pipeline.
Nozzle sizes specified here must match those in the specification database.
End_Type: A string parameter that stores the nozzle end type, which is
used to automate the fitting selection. It is also used for end compatibility
checking between a nozzle and its connected pipeline.
Rating: A string parameter used to store the nozzle rating, which is used to
automate the fitting selection. It is also used for end compatibility checking
between a nozzle and its connected pipeline.
2012 PTC
Module 14 | Page 3
Piping\Specification_Driven_Routing
Task 1:
PIPING.ASM
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click NO in the Creo Parametric Options message window.
al
U
se
nl
y
te
rn
In
PT
4. Click Piping
from the
Engineering group.
Fo
r
Module 14 | Page 4
2012 PTC
Task 2:
nl
y
in the model
2. Click Settings
tree and select Tree Filters.
U
se
te
rn
al
4. Expand WATER-PIPE-1.ASM in
the model tree.
Notice the created line stock
and pipeline features, as
shown.
Select ASM_DEF_CSYS in
the model tree, right-click, and
select Hide.
Fo
r
PT
In
from the
Click Set Start
Routing group.
Select the PORT0 coordinate
system on the model, as
shown.
Click OK.
2012 PTC
Module 14 | Page 5
O
U
se
In
te
rn
al
nl
y
PT
Fo
r
from the
Click Set Start
Routing group.
Select a location on the third
pipeline segment, as shown.
Edit the length value to 500.
Click OK.
Module 14 | Page 6
2012 PTC
nl
y
from the
Click To Pnt/Port
Routing group.
Select the PIPE_END point,
as shown.
in
Click Apply Changes
the To Point/Port dialog box.
Fo
r
PT
In
te
rn
al
U
se
2012 PTC
Module 14 | Page 7
nl
y
Inserting Fittings
Branch Fittings
PT
In
te
rn
al
U
se
Fo
r
2012 PTC
pipelines are trimmed to the location of the coordinate system ports on each
leg.
When using the Group Fitting option, you can insert more than one fitting
during the insertion process. In addition, the group fitting functionality enables
the following:
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 14 | Page 9
Piping\Specification_Driven_Fittings
Task 1:
FITTING.ASM
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click NO in the Creo Parametric Options message window.
al
U
se
nl
y
4. Click Piping
te
rn
Fo
r
PT
In
Module 14 | Page 10
2012 PTC
Task 2:
In
te
rn
al
Click Reducer
in the Insert
Fitting dialog box.
Select a location on the
pipeline segment, as shown.
Edit the fitting location value
to 1000.
Click Expand Preview in the
Insert Fitting dialog box.
Notice the fitting preview
graphics, as shown.
Select the Placement/
Orientation tab.
Notice that the reducer location
is previewed on the model, as
shown.
Select the Selection tab.
Click Apply.
Notice that the reducer is
placed on the model.
nl
y
from
U
se
PT
Fo
r
Click Tee
in the Insert
Fitting dialog box.
Select APNTO on the model,
as shown.
Notice that the fitting preview
graphics update and the
branch size changes, as
shown. The branch size is
determined by the pipeline
size.
Click OK in the Insert Fitting
dialog box.
Notice that the tee fitting is
placed on the model.
2012 PTC
Module 14 | Page 11
nl
y
O
U
se
PT
In
te
rn
al
Fo
r
Module 14 | Page 12
2012 PTC
Design Rules
You can specify line stock parameters that check selected
pipelines to ensure pipes stay within defined limitations.
Design Rule Parameters
te
rn
al
U
se
nl
y
Missing Fittings
Segment Violations
Bend Violations
Branch Violations
Flow Violations
End Type Compatibility
Invalid Pipeline Label Size
Design Rules
In
PT
Fo
r
Dynamic Design Rule Checking: You can enable or disable design rule
checking during the pipe modeling process. When you enable design rule
checking, the location of violations can be displayed and you can correct
them at an early stage. The modeling process then proceeds with greater
accuracy. The following design rules can be checked:
2012 PTC
Module 14 | Page 13
Piping\Piping_Design_Rules
Task 1:
RULES.ASM
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click NO in the Creo Parametric Options message window.
te
rn
al
U
se
nl
y
In
4. Click Piping
from the
Engineering group.
PT
Fo
r
in the model
7. Click Settings
tree and select Tree Filters.
9. Select WATER-PIPE-1.ASM in
the model tree.
Right-click and select
Activate.
Expand WATER-PIPE-1.ASM
in the model tree.
Module 14 | Page 14
2012 PTC
Task 2:
from
nl
y
U
se
te
rn
al
In
Task 3:
from the
PT
Fo
r
2012 PTC
Module 14 | Page 15
nl
y
Fo
r
PT
In
te
rn
al
U
se
Module 14 | Page 16
2012 PTC
te
rn
al
U
se
nl
y
Benefits
In
PT
Fo
r
2012 PTC
Module 14 | Page 17
Piping\Continuous_Fittings
Task 1:
CONT_FITTING.ASM
al
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options dialog box.
Click NO in the Creo Parametric Options message window.
te
rn
U
se
nl
y
In
4. Click Piping
PT
7. Click Settings
8. In the Model Tree Items dialog box, select the Features check box
under Display and click OK.
Fo
r
Module 14 | Page 18
2012 PTC
Task 2:
from the
O
U
se
Fo
r
PT
In
te
rn
al
nl
y
in the
Click Fitting Elbow
Insert Fitting dialog box.
Select a location at the end
of the horizontal pipeline
segment, as shown.
Click Apply.
Notice that the fitting is
inserted at the end of the
pipeline segment, as shown.
Task 3:
1. Click Pipe
group.
2. Click To Pnt/Port
Routing group.
from the
2012 PTC
Module 14 | Page 19
nl
y
Fo
r
PT
In
te
rn
al
U
se
Module 14 | Page 20
2012 PTC
Non-Break Fittings
You can insert fittings into a pipeline that do not break the
pipeline such as a clamp.
Non-Breaking Fittings for Pipelines
In
te
rn
al
U
se
nl
y
Fo
r
PT
2012 PTC
Module 14 | Page 21
nl
y
O
U
se
al
te
rn
In
C
PT
Fo
r
Module 14 | Page 22
2012 PTC
15
nl
y
Module
U
se
PT
Objectives
In
te
rn
al
Creo Schematics can be used to create 2-D schematic fluid system designs
known as process and instrumentation diagrams (P & IDs). These diagrams
can contain routed pipelines and in-line components, such as reducers and
valves. Creo Schematics P & IDs can be used to transfer schematic data into
specification-driven piping designs in Creo Parametric. This enables the
automatic designation of equipment and nozzles in Creo Parametric. When
creating pipelines, routing pipes, and inserting fittings, automatic selections
based on imported XML data can be made where possible. It is important to
correctly configure design properties within P & IDs to ensure correct transfer
of information into specification-driven piping designs in Creo Parametric.
Fo
r
2012 PTC
Module 15 | Page 1
In
te
rn
al
U
se
nl
y
Pipelines
Bore Sizes
Flow Direction
Equipment
Tanks
Nozzles
PT
Fo
r
Process and Instrumentation Diagrams (P & IDs) are used to map out fluid
systems.
P & IDs can contain pipelines and details documenting bore sizes and
the flow direction of pipes.
P & IDs can also contain equipment such as tanks and nozzles.
P & IDs can also contain in-line functional components such as valves
and reducers.
Module 15 | Page 2
2012 PTC
nl
y
Design Catalog
Port/Block/Fiber/Group
Artifacts
U
se
Properties
Instancing
Datatables
In
te
rn
al
Datasets
Fo
r
PT
Module 15 | Page 3
nl
y
Fo
r
PT
In
te
rn
al
U
se
Module 15 | Page 4
2012 PTC
te
rn
al
U
se
nl
y
Piping Components
Blocks
Ports
Pipelines
In
Recommended Properties
Fo
r
PT
Pipelines Spec
Equipment Category = Equipment, and Model_Name.
Nozzles Category = Nozzle, Model_Name, End_Type, Sname, and
Spec.
Branches Category = Branch, Model_Name, End_Type, Sname, and
Spec.
Fittings Category, Model_Name, Size, Nsize, Bsize, End_Type,
Sname, and Spec.
Ports Entry_Port, Size.
Module 15 | Page 5
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 15 | Page 6
2012 PTC
Piping\Review_Design
PIPING_REVIEW
Task 1:
nl
y
Fo
r
PT
In
te
rn
al
U
se
2012 PTC
Module 15 | Page 7
In
te
rn
al
U
se
nl
y
Fo
r
PT
Module 15 | Page 8
2012 PTC
U
se
nl
y
PT
In
te
rn
al
Fo
r
2012 PTC
Module 15 | Page 9
U
se
nl
y
XML Data
Designate Components
Automate Selections
te
rn
al
In
Export Design Information: P & IDs design data can be exported as an XML
file to Creo Parametric.
Fo
r
PT
Module 15 | Page 10
2012 PTC
Piping\Export_Design
PIPING_EXPORT
Task 1:
nl
y
Fo
r
PT
In
te
rn
al
U
se
2012 PTC
Module 15 | Page 11
nl
y
You can import the XML file into a Creo Parametric piping design.
You can then use the information to designate piping components,
create pipelines, and ensure that the correct fittings are inserted
within pipelines.
Fo
r
PT
In
te
rn
al
U
se
Module 15 | Page 12
2012 PTC
16
nl
y
Module
U
se
Module Overview
PT
In
te
rn
al
Objectives
Fo
r
2012 PTC
Module 16 | Page 1
nl
y
Figure 1 Designating
Equipment
U
se
Designator
Model
Component
Status Options
te
rn
al
Designated
Auto Match
Manual Match
Multiple
Missing
Undesignated
Figure 2 Designated
Pipeline Information
In
PT
Fo
r
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
Missing A component with the specified name under the Model column
is not found.
Undesignated A component that has been undesignated manually.
2012 PTC
Module 16 | Page 3
Piping\Designating_Information
Task 1:
DESIGNATE.ASM
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK from the Creo Parametric Options window.
Click No from the Creo Parametric Options window.
al
U
se
nl
y
In
te
rn
PT
4. Click Piping
from the
Engineering group.
from
Fo
r
in the Create
Click Open
Pipeline dialog box.
Select PIPING_OUTPUT.XML
and click Open.
Notice that the schematic
information is used to complete
the Create Pipeline dialog box,
as shown.
Module 16 | Page 4
2012 PTC
Task 2:
O
U
se
PT
In
te
rn
al
in the Create
Components
Pipeline dialog box.
Notice that the 150A_IC
component is automatically
designated, as shown.
Select the IC2 row in the
dialog box, as shown.
Notice that both 50A_IC
components are highlighted
on the model, as shown.
Select the right 50A_IC
component on the model, as
shown.
Notice that the IC2 row
updates, as shown. All
required components for
pipeline routing have been
designated.
nl
y
Fo
r
2012 PTC
Module 16 | Page 5
O
U
se
Figure 1 Highlighted
Port Locations and
Components
te
rn
al
nl
y
In
Enabling Schematic Driven: You can route a pipeline based on the schematic
information if the piping_schematic_driven configuration option is set to yes.
PT
Fo
r
All available start and end port locations (coordinate systems) along with
the corresponding equipment or nozzle are highlighted during routing.
The coordinate systems are highlighted only if the ENTRY_PORT
parameter in XML has the same value as the coordinate system name
of the corresponding equipment or nozzle. (For example, port0.)
Terminal ports and models that are already connected are not
highlighted.
Warning messages appear if you select a non-designated item for a start or
end port location. You can ignore the warning message and continue the
routing operation from the selected port. This difference can be verified by
performing a schematic consistency check after routing is complete.
Module 16 | Page 6
2012 PTC
Piping\Schematic_Routing
Task 1:
SCHEM_ROUTE.ASM
nl
y
al
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options window.
Click No in the Creo Parametric Options window.
te
rn
U
se
In
PT
4. Click Piping
from the
Engineering group.
Fo
r
2012 PTC
Module 16 | Page 7
Task 2:
al
U
se
nl
y
1. Click Pipe
from the Routing
group.
Select LEG-1 in the model
tree.
Click Confirm to activate the
WATER-LEG-1.ASM.
Notice that the available
routing ports and components
are highlighted on the model,
as shown.
In
te
rn
Fo
r
PT
Module 16 | Page 8
2012 PTC
O
U
se
nl
y
from the
Click Extend
Routing group.
Select Along Csys Axis as
the type of extend, as shown.
Edit the length value to 3000
and press ENTER.
Click Apply.
al
Fo
r
PT
In
te
rn
from the
Click To Pnt/Port
Routing group.
Select PORT0 on the 50A_IC
component on the model, as
shown.
in the To
Click Apply
Point/Port dialog box.
Notice the completed pipeline
routing, as shown.
The warning in the message area indicates that the pipe segment
size, 150A, and the entry port size, 50A, are mismatched. This can
be resolved by inserting a reducer in the pipeline.
2012 PTC
Module 16 | Page 9
O
U
se
al
Category Parameter
Mapped value in piping_mcat_dir.ptd
Controls Fitting Category Icons
SNAME Parameter
Mapped value in piping_mcat_dir.ptd
SIZE Parameter
Optional
Matches size in pipe segment
nl
y
Fitting Requirements
te
rn
Group Fittings
In
PT
Fo
r
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 16 | Page 11
Piping\Schematic_Fittings
Task 1:
SCHEM_FITT.ASM
nl
y
al
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK from the Creo Parametric Options window.
Click No from the Creo Parametric Options window.
te
rn
U
se
In
PT
Fo
r
4. Click Piping
from the
Engineering group.
5. Click Piping System Views
in the model tree.
If necessary, click Pipeline
View to de-select the option in
the drop-down list.
in the model
6. Click Settings
tree and select Tree Filters.
7. In the Model Tree Items dialog
box, select the Features check
box under Display and click OK.
8. Expand WATER-LEG-1.ASM in
the model tree.
Notice the pipeline features as
shown.
Module 16 | Page 12
2012 PTC
te
rn
al
nl
y
U
se
Task 2:
Fo
r
PT
In
2012 PTC
Module 16 | Page 13
te
rn
al
nl
y
U
se
Task 3:
Fo
r
PT
In
Module 16 | Page 14
2012 PTC
te
rn
al
U
se
nl
y
In
PT
Comparing 2-D and 3-D Data: The schematic consistency check report is
generated by comparing the 2-D schematic information and the 3-D model
information of a pipeline.
Fo
r
In the Pipeline Designation dialog box, you can click Info > Schematic Check
to generate a schematic check report.
Report Information: The report consists of four columns: Item, Schematic
Info, Status, and Model Info. The report provides information in the following
sequence:
General information about the pipeline, such as Mnemonic, Number, Size,
and Spec.
Information relating to the main extension, followed by each branch
extension. The branch extensions are identified using the string BRxx
DETAILS, where xx is the extension number. Within each extension, the
connected series and their constituent components are reported using the
flow direction and the sequence in which they appear on the pipeline.
Each element is reported in a row. The schematic and model information
are reported under the respective Schematic Info and Model Info columns.
The Status column is used to indicate the result of the consistency check.
The following options can be displayed in the Status column:
2012 PTC
Module 16 | Page 15
Fo
r
PT
In
te
rn
al
U
se
nl
y
Module 16 | Page 16
2012 PTC
In
Modify Pipelines
Replace Fittings
te
rn
U
se
al
nl
y
Piping Design
PT
Fo
r
Piping Design: To maintain design integrity, the updated XML file can be
imported to the piping design.
This can be achieved by updating the designated information such as
pipelines, equipment, and fittings.
A schematic consistency check can then be performed. This compares the
2-D and 3-D data and identifies differences such as pipeline segments
and fittings.
It is then possible to update the piping design. This can involve modifying
pipeline segments, rerouting pipelines to different locations, and replacing
inserted fittings.
2012 PTC
Module 16 | Page 17
Piping\Schematic_Update
Task 1:
RSD_UPDATE.ASM
nl
y
al
.
Click Working Directory
Select PIPING_CONFIG.PRO and click Open.
Click OK in the Creo Parametric Options window.
Click No in the Creo Parametric Options window.
te
rn
U
se
In
4. Click Piping
from the
Engineering group.
Fo
r
PT
Module 16 | Page 18
2012 PTC
7. Click Designation
from the
Pipeline group.
Select the pipeline segment
between the two reducers.
Click Open
in the Pipeline
Designation dialog box.
nl
y
te
rn
al
U
se
PT
In
Fo
r
10. Click Info > Designation Info in the Pipeline Designation dialog box.
Notice that the two connectors are listed as missing in the
information window, as shown.
Click Close in the information window.
in the Pipeline Designation dialog
Click Store Designation Info
box.
2012 PTC
Module 16 | Page 19
Fo
r
PT
In
te
rn
al
nl
y
U
se
Task 2:
Module 16 | Page 20
2012 PTC
17
O
nl
y
Module
U
se
Module Overview
al
You can export Isometric Drawing Generation (ISOGEN) PCF data from
within Creo Parametric piping designs. This data can be used as an input
to ISOGEN applications for the automatic creation of pipeline, spool, and
system isometric drawings.
te
rn
Objectives
Fo
r
PT
In
2012 PTC
Module 17 | Page 1
nl
y
PCF Data
ISOGEN Applications
Automatic isometric drawings
Isometric Drawing Types
Pipeline
Spool
System
U
se
Configuration Options
PT
In
te
rn
al
Fo
r
2012 PTC
Fo
r
PT
In
te
rn
al
U
se
nl
y
2012 PTC
Module 17 | Page 3
Piping\Isogen
Task 1:
ISOGEN.ASM
nl
y
U
se
al
te
rn
In
PT
Fo
r
Module 17 | Page 4
2012 PTC
11. Observe the message that displays in the message area, indicating
that the Generate Isometric task has completed successfully.
In
Task 2:
te
rn
al
U
se
nl
y
PT
1. Click Open
from the Quick Access toolbar.
Select the ISOGEN.DRW drawing and click Open.
Fo
r
4. If necessary, select All Files (*) from the Type drop-down list.
5. Select ISOGEN.DXF and click Open
2012 PTC
Module 17 | Page 5
U
se
nl
y
Fo
r
PT
In
te
rn
al
Module 17 | Page 6
2012 PTC
Copyright
Piping using Creo Parametric 2.0
Copyright 2012 Parametric Technology Corporation and/or Its Subsidiary Companies.
All Rights Reserved.
nl
y
User and training guides and related documentation from Parametric Technology Corporation and its subsidiary companies (collectively
"PTC") are subject to the copyright laws of the United States and other countries and are provided under a license agreement that restricts
copying, disclosure, and use of such documentation. PTC hereby grants to the licensed software user the right to make copies in printed form
of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under
which the applicable software is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice provided by
PTC. Training materials may not be copied without the express written consent of PTC. This documentation may not be disclosed, transferred,
modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written
consent of PTC and no authorization is granted to make copies for such purposes.
Information described herein is furnished for general information only, is subject to change without notice, and should not be construed as a
warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors or inaccuracies that may appear in this document.
The software described in this document is provided under written license agreement, contains valuable trade secrets and proprietary
information, and is protected by the copyright laws of the United States and other countries. It may not be copied or distributed in any form
or medium, disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior
approval from PTC.
U
se
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION.
PTC regards software piracy as the crime it is, and we view offenders accordingly. We do not tolerate the piracy of PTC software products,
and we pursue (both civilly and criminally) those who do so using all legal means available, including public and private surveillance resources.
As part of these efforts, PTC uses data monitoring and scouring technologies to obtain and transmit data on users of illegal copies of our
software. This data collection is not performed on users of legally licensed software from PTC and its authorized distributors. If you are using
an illegal copy of our software and do not consent to the collection and transmission of such data (including to the United States), cease
using the illegal version, and contact PTC to obtain a legally licensed copy.
al
Important Copyright, Trademark, Patent, and Licensing Information: See the About Box, or copyright notice, of your PTC software.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND
te
rn
This document and the software described herein are Commercial Computer Documentation and Software, pursuant to FAR 12.212(a)-(b)
(OCT95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN95), and are provided to the US Government under a limited commercial license
only. For procurements predating the above clauses, use, duplication, or disclosure by the Government is subject to the restrictions set forth
in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 (OCT88) or Commercial
Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN87), as applicable. 01012012
PT
T3910-390-01
Date
PRINTING HISTORY
Document No.
In
05/22/2012
Fo
r
Description
Initial Printing of:
Piping using Creo Parametric 2.0