[9] CEN 1995, Eurocode 8: Earthquake Resistant Design of Structures - Part 1: General Rules,
ENV1998-1, Parts 1-3, CEN, Brussels, Belgium.
[25] NEHRP, 2009, Research Required to Support Full Implementation of Performance-Based Seismic Design, prepared by The Building Seismic Safety Council of The National Institute of Building Sciences Washington, D.C. [19] ICC, 2001, International Performance Code for Buildings and Facilities, International Code Council, Whittier, California [4] ATC, 1997a, NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA 273 Report, prepared by the Applied Technology Council for the Building Seismic Safety Council, published by the Federal Emergency Management Agency, Washington, D.C. [32] SEAOC, 1995, Vision 2000: Performance-Based Seismic Engineering of Buildings, Structural Engineers Association of California, Sacramento, California. [37] Xue Q, Chia-Wei Wu, Cheng-Chung Chen, Kuo-Ching Chen, 2007, Civil and Hydraulic Engineering Research Center, Sinotech Engineering Consultants Inc., Taiwan, The draft code for performance-based seismic design of buildings in Taiwan. Available online at www.sciencedirect.com, Engineering Structures 30 (2008) 1535-1547 [1]Gregory G. Deierlein, ASCE Member; Sameh S. Mehanny2 PROBLEMS IN PREDICTING SEISMIC RESPONSES OF RC BUILDINGS Advanced Technology in Structural Engineering, Structures 2000 [2]Ronald O. Hamburger1, SE, SECB, CODES AND STANDARDS FOR PERFORMANCE-BASED DESIGN, Structural Engineering Research Frontiers,2007 ASCE [3]B. E. Kehoe1, Performance Based Seismic Rehabilitation of Nonstructural Components, STRUCURES CONGREESS 2005, ASCE 2005 [34] Magazine: - Structuremag - A Joint Publication of NCSEA/ CASE/ SEI, June, 2008, Performance-Based Design with Application to Seismic Hazard [6] ATC, 2006, Next-Generation Performance-Based Seismic Design Guidelines: Program Plan for New and Existing Buildings, FEMA 445, Federal Emergency Management Agency, Washington, D.C. [5]Non-linear Static Push-over Analysis www.architectjaved.com/nonlinear-static-pushover-analysis/ [2] ASCE, 2000, Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356 Report, prepared by the American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, D.C. [7]Seismic evaluation and retrofit of concrete buildings Volume 1 [8] seismic analysis of structure by prof TK data
[11]Ho, S.Y. and Wang, C. Y., Determination of the Plastic Hinge Properties of RC structure containing Brick Walls, Structural Engineering of Taiwan, (in press) (in Chinese), 2006. [12] Indian standard 1893