0 оценок0% нашли этот документ полезным (0 голосов)
150 просмотров2 страницы
The document describes OILSCO Technologies' next generation under reamer tool. It has a simple yet effective hydro-mechanical design that activates cutter blocks using a spring-loaded system. This ensures the cutters fully retract and allows for forward and reverse reaming. The tool is suitable for complex drilling applications like extended-reach wells, unstable formations, and deepwater drilling. It aims to lower drilling pressures and allow higher pump rates.
The document describes OILSCO Technologies' next generation under reamer tool. It has a simple yet effective hydro-mechanical design that activates cutter blocks using a spring-loaded system. This ensures the cutters fully retract and allows for forward and reverse reaming. The tool is suitable for complex drilling applications like extended-reach wells, unstable formations, and deepwater drilling. It aims to lower drilling pressures and allow higher pump rates.
The document describes OILSCO Technologies' next generation under reamer tool. It has a simple yet effective hydro-mechanical design that activates cutter blocks using a spring-loaded system. This ensures the cutters fully retract and allows for forward and reverse reaming. The tool is suitable for complex drilling applications like extended-reach wells, unstable formations, and deepwater drilling. It aims to lower drilling pressures and allow higher pump rates.
Created as part of our next-generation portfolio of products, it represents a new approach to under-reaming in the most complex or demanding drilling conditions. Used in simultaneous drilling and under-reaming applications with rotary steerable drilling systems, its perfectly equipped to perform across a range of applications. New thinking. New levels of drilling performance. UNDER REAMER OILSCO Technologies Next Generation (nx g ) Under Reamer. DATA SHEET A key energy ventures company OILSCO TECHNOLOGIES Our Under Reamer is a textbook case of this principle in practice. - It boasts a hydro mechanical system which activates by pushing the cutter block up a ramp in the Body and out against an internal spring and the wellbore formation. - The unique positive spring- loaded drive system ensures the cutter blocks return fully into the Body when pumping ceases. - The tool consists of three cutter blocks with an asymmetric cutting structure profle which ensures aggressive, stable cutting of the wellbore with forward and back reaming capability. Want more information on our Under Reamer? Visit www.oilsco-tech.com or email us at info@oilsco-tech.com Everything we do at OILSCO is characterised by fresh thinking: by formulating efcient new ways to address your drilling or workover challenges. - The tool is ftted with a small nozzle confguration which, upon tool activation, provides a tell-tale indicator on surface a pressure drop on the gauges that the cutter blocks are deploying. - The pressure drop is seen at the same time as the cutter blocks make contact with the wellbore so an increase in torque is also evident. - Upon tool activation, fow bypasses the ball for full through-fow to the bit. Applications - ECD concerns Lower the ECD and allow higher pump rates in extended-reach horizontal wells. - Problematic formations unstable shale formations/heavy oils. - Difculty in getting slotted liners to TD (no rotation/circulation). - Restricted ID casings need to open directly below casing shoe to allow cementation of next casing string. - Deepwater. - Drilling extended intervals with advanced rotary steerable systems (RSS). COMING SOON: MULTIPLE ACTIVATION UNDER-REAMING, VIA OILSCOS NEXT-GENERATION M.A.P TOOL TECHNOLOGY. - The single piece body of the Under Reamer allows for higher tensile and torque load capacity. - The Under Reamers deactivation feature represents a new method to shut the tool of and continue to drill ahead. A secondary ball is dropped from surface to close of the actuation trigger and allow full circulation to continue. - Extended-reach drilling (ERD). - Backreaming in loosely consolidated formations. - Drilling highly abrasive formations. Under Reamer Specifcations (all sizes in inches unless otherwise specifed) Tool Series No. Min Pilot Hole Size Max Hole Opening Size Max Body OD Tool ID Overall Length Fishing Neck Dia Top Connection Bottom Connection Cutter Blocks Max Flowrate NXG-UR-588 6 7 5.875 1.375 90 4.75 3-1/2 IF Box 3-1/2 IF Pin 3 350 gpm NXG-UR-838 8.5 9.875 8.375 2.25 105 6.75 4-1/2 IF Box 4-1/2 IF Pin 3 750 gpm NXG-UR-1038 10.625 12.25 10.5 3.125 120 8.25 6-5/8 Reg Box 6-5/8 Reg Pin 3 1200 gpm NXG-UR-1200 12.25 14.75 12.125 3.125 130 8.25 6-5/8 Reg Box 6-5/8 Reg Pin 3 1200 gpm